summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-22perf/arm-cmn: Add more bits to child node address offset fieldIlkka Koskinen
CMN-600 uses bits [27:0] for child node address offset while bits [30:28] are required to be zero. For CMN-650, the child node address offset field has been increased to include bits [29:0] while leaving only bit 30 set to zero. Let's include the missing two bits and assume older implementations comply with the spec and set bits [29:28] to 0. Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220808195455.79277-1-ilkka@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org>
2022-09-22usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLYRen Zhijie
Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/anx7411.o: In function `anx7411_detect_power_mode': anx7411.c:(.text+0x527): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_set_prop': anx7411.c:(.text+0x90d): undefined reference to `power_supply_get_drvdata' anx7411.c:(.text+0x930): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_get_prop': anx7411.c:(.text+0x94d): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/anx7411.o: In function `anx7411_i2c_probe': anx7411.c:(.text+0x111d): undefined reference to `devm_power_supply_register' drivers/usb/typec/anx7411.o: In function `anx7411_work_func': anx7411.c:(.text+0x167c): undefined reference to `power_supply_changed' anx7411.c:(.text+0x1b55): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Reviewed-by: Xin Ji <xji@analogixsemi.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Link: https://lore.kernel.org/r/20220920084431.196258-1-renzhijie2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22counter: 104-quad-8: Fix skipped IRQ lines during events configurationWilliam Breathitt Gray
IRQ trigger configuration is skipped if it has already been set before; however, the IRQ line still needs to be OR'd to irq_enabled because irq_enabled is reset for every events_configure call. This patch moves the irq_enabled OR operation update to before the irq_trigger check so that IRQ line enablement is not skipped. Fixes: c95cc0d95702 ("counter: 104-quad-8: Fix persistent enabled events bug") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220815122301.2750-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/179eed11eaf225dbd908993b510df0c8f67b1230.1663844776.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22arm64: topology: fix possible overflow in amu_fie_setup()Sergey Shtylyov
cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*, while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'. Multiplying max frequency by 1000 can potentially result in overflow -- multiplying by 1000ULL instead should avoid that... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: cd0ed03a8903 ("arm64: use activity monitors for frequency invariance") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/01493d64-2bce-d968-86dc-11a122a9c07d@omp.ru Signed-off-by: Will Deacon <will@kernel.org>
2022-09-22arm64: mm: don't acquire mutex when rewriting swapperMark Rutland
Since commit: 47546a1912fc4a03 ("arm64: mm: install KPTI nG mappings with MMU enabled)" ... when building with CONFIG_DEBUG_ATOMIC_SLEEP=y and booting under QEMU TCG with '-cpu max', there's a boot-time splat: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 15, name: migration/0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | no locks held by migration/0/15. | irq event stamp: 28 | hardirqs last enabled at (27): [<ffff8000091ed180>] _raw_spin_unlock_irq+0x3c/0x7c | hardirqs last disabled at (28): [<ffff8000081b8d74>] multi_cpu_stop+0x150/0x18c | softirqs last enabled at (0): [<ffff80000809a314>] copy_process+0x594/0x1964 | softirqs last disabled at (0): [<0000000000000000>] 0x0 | CPU: 0 PID: 15 Comm: migration/0 Not tainted 6.0.0-rc3-00002-g419b42ff7eef #3 | Hardware name: linux,dummy-virt (DT) | Stopper: multi_cpu_stop+0x0/0x18c <- stop_cpus.constprop.0+0xa0/0xfc | Call trace: | dump_backtrace.part.0+0xd0/0xe0 | show_stack+0x1c/0x5c | dump_stack_lvl+0x88/0xb4 | dump_stack+0x1c/0x38 | __might_resched+0x180/0x230 | __might_sleep+0x4c/0xa0 | __mutex_lock+0x5c/0x450 | mutex_lock_nested+0x30/0x40 | create_kpti_ng_temp_pgd+0x4fc/0x6d0 | kpti_install_ng_mappings+0x2b8/0x3b0 | cpu_enable_non_boot_scope_capabilities+0x7c/0xd0 | multi_cpu_stop+0xa0/0x18c | cpu_stopper_thread+0x88/0x11c | smpboot_thread_fn+0x1ec/0x290 | kthread+0x118/0x120 | ret_from_fork+0x10/0x20 Since commit: ee017ee353506fce ("arm64/mm: avoid fixmap race condition when create pud mapping") ... once the kernel leave the SYSTEM_BOOTING state, the fixmap pagetable entries are protected by the fixmap_lock mutex. The new KPTI rewrite code uses __create_pgd_mapping() to create a temporary pagetable. This happens in atomic context, after secondary CPUs are brought up and the kernel has left the SYSTEM_BOOTING state. Hence we try to acquire a mutex in atomic context, which is generally unsound (though benign in this case as the mutex should be free and all other CPUs are quiescent). This patch avoids the issue by pulling the mutex out of alloc_init_pud() and calling it at a higher level in the pagetable manipulation code. This allows it to be used without locking where one CPU is known to be in exclusive control of the machine, even after having left the SYSTEM_BOOTING state. Fixes: 47546a1912fc ("arm64: mm: install KPTI nG mappings with MMU enabled") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220920134731.1625740-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-09-22drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTESPhil Auld
As PAGE_SIZE is unsigned long, -1 > PAGE_SIZE when NR_CPUS <= 3. This leads to very large file sizes: topology$ ls -l total 0 -r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 core_cpus -r--r--r-- 1 root root 4096 Sep 5 11:59 core_cpus_list -r--r--r-- 1 root root 4096 Sep 5 10:58 core_id -r--r--r-- 1 root root 18446744073709551615 Sep 5 10:10 core_siblings -r--r--r-- 1 root root 4096 Sep 5 11:59 core_siblings_list -r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 die_cpus -r--r--r-- 1 root root 4096 Sep 5 11:59 die_cpus_list -r--r--r-- 1 root root 4096 Sep 5 11:59 die_id -r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 package_cpus -r--r--r-- 1 root root 4096 Sep 5 11:59 package_cpus_list -r--r--r-- 1 root root 4096 Sep 5 10:58 physical_package_id -r--r--r-- 1 root root 18446744073709551615 Sep 5 10:10 thread_siblings -r--r--r-- 1 root root 4096 Sep 5 11:59 thread_siblings_list Adjust the inequality to catch the case when NR_CPUS is configured to a small value. Fixes: 7ee951acd31a ("drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Yury Norov <yury.norov@gmail.com> Cc: stable@vger.kernel.org Cc: feng xiangjun <fengxj325@gmail.com> Reported-by: feng xiangjun <fengxj325@gmail.com> Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20220906203542.1796629-1-pauld@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22net/smc: Stop the CLC flow if no link to map buffers onWen Gu
There might be a potential race between SMC-R buffer map and link group termination. smc_smcr_terminate_all() | smc_connect_rdma() -------------------------------------------------------------- | smc_conn_create() for links in smcibdev | schedule links down | | smc_buf_create() | \- smcr_buf_map_usable_links() | \- no usable links found, | (rmb->mr = NULL) | | smc_clc_send_confirm() | \- access conn->rmb_desc->mr[]->rkey | (panic) During reboot and IB device module remove, all links will be set down and no usable links remain in link groups. In such situation smcr_buf_map_usable_links() should return an error and stop the CLC flow accessing to uninitialized mr. Fixes: b9247544c1bc ("net/smc: convert static link ID instances to support multiple links") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22media: flexcop-usb: fix endpoint type checkJohan Hovold
Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") tried to add an endpoint type sanity check for the single isochronous endpoint but instead broke the driver by checking the wrong descriptor or random data beyond the last endpoint descriptor. Make sure to check the right endpoint descriptor. Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") Cc: Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org # 5.9 Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151027.27026-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22efi: libstub: check Shim mode using MokSBStateRTArd Biesheuvel
We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Jones <pjones@redhat.com>
2022-09-22efi: x86: Wipe setup_data on pure EFI bootArd Biesheuvel
When booting the x86 kernel via EFI using the LoadImage/StartImage boot services [as opposed to the deprecated EFI handover protocol], the setup header is taken from the image directly, and given that EFI's LoadImage has no Linux/x86 specific knowledge regarding struct bootparams or struct setup_header, any absolute addresses in the setup header must originate from the file and not from a prior loading stage. Since we cannot generally predict where LoadImage() decides to load an image (*), such absolute addresses must be treated as suspect: even if a prior boot stage intended to make them point somewhere inside the [signed] image, there is no way to validate that, and if they point at an arbitrary location in memory, the setup_data nodes will not be covered by any signatures or TPM measurements either, and could be made to contain an arbitrary sequence of SETUP_xxx nodes, which could interfere quite badly with the early x86 boot sequence. (*) Note that, while LoadImage() does take a buffer/size tuple in addition to a device path, which can be used to provide the image contents directly, it will re-allocate such images, as the memory footprint of an image is generally larger than the PE/COFF file representation. Cc: <stable@vger.kernel.org> # v5.10+ Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-22Merge tag 'drm-intel-fixes-2022-09-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes 2 gem context related fixes: - to avoid a general protection failure when using perf/OA (Chris) - to avoid kernel warnings on driver release (Janusz) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yyt1CV+YIjKQZZMB@intel.com
2022-09-21Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-20 (ice) Michal re-sets TC configuration when changing number of queues. Mateusz moves the check and call for link-down-on-close to the specific path for downing/closing the interface. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix interface being down after reset with link-down-on-close flag on ice: config netdev tc before setting queues number ==================== Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficientLarysa Zaremba
The original patch added the static branch to handle the situation, when assigning an XDP TX queue to every CPU is not possible, so they have to be shared. However, in the XDP transmit handler ice_xdp_xmit(), an error was returned in such cases even before static condition was checked, thus making queue sharing still impossible. Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-19 (iavf, i40e) Norbert adds checking of buffer size for Rx buffer checks in iavf. Michal corrects setting of max MTU in iavf to account for MTU data provided by PF, fixes i40e to set VF max MTU, and resolves lack of rate limiting when value was less than divisor for i40e. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix set max_tx_rate when it is lower than 1 Mbps i40e: Fix VF set max MTU size iavf: Fix set max MTU size with port VLAN and jumbo frames iavf: Fix bad page state ==================== Link: https://lore.kernel.org/r/20220919223428.572091-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()Nícolas F. R. A. Prado
As the comment right before the mtk_dsi_stop() call advises, mtk_dsi_stop() should only be called after mtk_drm_crtc_atomic_disable(). That's because that function calls drm_crtc_wait_one_vblank(), which requires the vblank irq to be enabled. Previously mtk_dsi_stop(), being in mtk_dsi_poweroff() and guarded by a refcount, would only be called at the end of mtk_drm_crtc_atomic_disable(), through the call to mtk_crtc_ddp_hw_fini(). Commit cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs") moved the mtk_dsi_stop() call to mtk_output_dsi_disable(), causing it to be called before mtk_drm_crtc_atomic_disable(), and consequently generating vblank timeout warnings during suspend. Move the mtk_dsi_stop() call back to mtk_dsi_poweroff() so that we have a working vblank irq during mtk_drm_crtc_atomic_disable() and stop getting vblank timeout warnings. Fixes: cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Link: http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-09-21drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()Nathan Chancellor
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml314_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1710 Reported-by: "kernelci.org bot" <bot@kernelci.org> Tested-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Reduce number of arguments of dml314's ↵Nathan Chancellor
CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml314_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1710 Reported-by: "kernelci.org bot" <bot@kernelci.org> Tested-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amdgpu: don't register a dirty callback for non-atomicAlex Deucher
Some asics still support non-atomic code paths. Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper") Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0Evan Quan
The pptable in the vbios is fully ready. The related workarounds in driver are not needed any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/pm: add support for 3794 pptable for SMU13.0.0Evan Quan
Enable 3794 pptable support for SMU13.0.0. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: correct num_dsc based on HW capCharlene Liu
[why] num_dsc is 3 for dcn314 based on HW capablity. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314Nicholas Kazlauskas
[Why] This shouldn't trigger during tiled display hotplug/unplug but it does because one of the tiles can end up with a NULL plane state. This also doesn't guard against the hang that it was originally trying to resolve, and can instead cause DIO corruption due to OTG sync being lost. [How] This was reverted at one point out of DCN31 so revert it here too. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINEDaniel Miess
[Why] DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE shift and mask being missing [How] Add in shift and mask for ICH_RESET_AT_END_OF_LINE Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: increase dcn315 pstate change latencyDmytro Laktyushkin
[Why & How] Update after new measurment came in Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Fix DP MST timeslot issue when fallback happenedCruise Hung
[Why] When USB4 DP link training failed and fell back to lower link rate, the time slot calculation uses the verified_link_cap. And the verified_link_cap was not updated to the new one. It caused the wrong VC payload time-slot was allocated. [How] Updated verified_link_cap with the new one from cur_link_settings after the LT completes successfully. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Display distortion after hotplug 5K tiled displayMeenakshikumar Somasundaram
[Why] During hot plug of specific 5K tiled display, sometimes both the tiles are not synchronized resulting in distortion. The reason is that otgs of both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa) is applied for bandwidth optimization. The otg workaround reenables otg but otg synchronization context is not reset and hence dc_trigger_sync() does not resynchronize otg again. [How] Implement reset_sync_context_for_pipe() to reset the otg synchronization context for the disabled pipe and its slave pipes when otg workaround is applied. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Update dummy P-state search to use DCN32 DMLGeorge Shen
[Why] Current DCN3.2 logic for finding the dummy P-state index uses the DCN3.0 DML validation function instead of DCN3.2 DML. This can result in either unexpected DML VBA values, or unexpected dummy P-state index to be used. [How] Update the dummy P-state logic to use DCN3.2 DML validation function. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: skip audio setup when audio stream is enabledzhikzhai
[why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: zhikzhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: update gamut remap if plane has changedHugo Hu
[Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Hugo Hu <hugo.hu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Assume an LTTPR is always present on fixed_vs linksMichael Strauss
[WHY] LTTPRs can in very rare instsances fail to increment DPCD LTTPR count. This results in aux-i LTTPR requests to be sent to the wrong DPCD address, which causes link training failure. [HOW] Override internal repeater count if fixed_vs flag is set for a given link Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: fix dcn315 memory channel count and width readDmytro Laktyushkin
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Fix double cursor on non-video RGB MPOLeo Li
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Only consider pixle rate div policy for DCN32+Alvin Lee
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Port DCN30 420 logic to DCN32Chris Park
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amdgpu: Update PTE flags with TF enabledMukul Joshi
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21perf tools: Honor namespace when synthesizing build-idsNamhyung Kim
It needs to enter the namespace before reading a file. Fixes: 4183a8d70a288627 ("perf tools: Allow synthesizing the build id for kernel/modules/tasks in PERF_RECORD_MMAP2") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220920222822.2171056-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-21tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: 7df548840c496b01 ("x86/bugs: Add "unknown" reporting for MMIO Stale Data") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Link: https://lore.kernel.org/lkml/YysTRji90sNn2p5f@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-21perf kcore_copy: Do not check /proc/modules is unchangedAdrian Hunter
/proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao <dqminh@cloudflare.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Daniel Dao <dqminh@cloudflare.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-21libperf evlist: Fix polling of system-wide eventsAdrian Hunter
Originally, (refer commit f90d194a867a5a1d ("perf evlist: Do not poll events that use the system_wide flag") there wasn't much reason to poll system-wide events because: 1. The mmaps get "merged" via set-output anyway (the per-cpu case) 2. perf reads all mmaps when any event is woken 3. system-wide mmaps do not fill up as fast as the mmaps for user selected events But there was 1 reason not to poll which was that it prevented correct termination due to POLLHUP on all user selected events. That issue is now easily resolved by using fdarray_flag__nonfilterable. With the advent of commit ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps"), system-wide mmaps can be used also in the per-thread case where reason 1 does not apply. Fix the omission of system-wide events from polling by using the fdarray_flag__nonfilterable flag. Example: Before: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55fb43c29e80]: pollfd[0] <- event_fd=5 thread_data[0x55fb43c29e80]: pollfd[1] <- event_fd=6 thread_data[0x55fb43c29e80]: pollfd[2] <- non_perf_event fd=4 After: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55cc19e58e80]: pollfd[0] <- event_fd=5 thread_data[0x55cc19e58e80]: pollfd[1] <- event_fd=6 thread_data[0x55cc19e58e80]: pollfd[2] <- event_fd=7 thread_data[0x55cc19e58e80]: pollfd[3] <- event_fd=9 thread_data[0x55cc19e58e80]: pollfd[4] <- event_fd=10 thread_data[0x55cc19e58e80]: pollfd[5] <- event_fd=11 thread_data[0x55cc19e58e80]: pollfd[6] <- event_fd=12 thread_data[0x55cc19e58e80]: pollfd[7] <- event_fd=13 thread_data[0x55cc19e58e80]: pollfd[8] <- event_fd=14 thread_data[0x55cc19e58e80]: pollfd[9] <- event_fd=15 thread_data[0x55cc19e58e80]: pollfd[10] <- non_perf_event fd=4 Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915122612.81738-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-21perf record: Fix cpu mask bit setting for mixed mmapsAdrian Hunter
With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value -1 must be skipped when setting CPU mask bits. Prior to commit cbd7bfc7fd99acdd ("tools/perf: Fix out of bound access to cpu mask array") the invalid setting went unnoticed, but since then it causes perf record to fail with an error. Example: Before: $ perf record -e intel_pt// --per-thread uname Failed to initialize parallel data streaming masks After: $ perf record -e intel_pt// --per-thread uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.068 MB perf.data ] Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915122612.81738-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-21perf test: Skip wp modify test on old kernelsNamhyung Kim
It uses PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl. The kernel would return ENOTTY if it's not supported. Update the skip reason in that case. Committer notes: On s/390 the args aren't used, so need to be marked __maybe_unused. Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20220914183338.546357-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-21Merge tag 'for-linus-6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fixes from Richard Weinberger: - Various fixes for build warnings - Fix default kernel command line * tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: arch: um: Mark the stack non-executable to fix a binutils warning um: Prevent KASAN splats in dump_stack() um: fix default console kernel parameter um: Cleanup compiler warning in arch/x86/um/tls_32.c um: Cleanup syscall_handler_t cast in syscalls_32.h
2022-09-21Merge tag 'mips-fixes_6.0_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix missing export for Lantiq watchdog driver - fix ethernet phy interface setup for Loongson32 * tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Loongson32: Fix PHY-mode being left unspecified MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
2022-09-21Merge tag 'dmaengine-fix-6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of small driver fixes: - xilinx_dma: devm_platform_ioremap_resource error handling, dma_set_mask_and_coherent failure handling, dt property read cleanup - refcount leak fix for of_xudma_dev_get() - zynqmp_dma: coverity fix for enum typecast" * tag 'dmaengine-fix-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: zynqmp_dma: Typecast with enum to fix the coverity warning dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get() dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling
2022-09-21Merge tag 'iommu-fixes-v6.0-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two fixes for Intel VT-d: - Check the right capability bit for 5-level page table support. - Revert a previous fix which caused a regression with Thunderbolt devices" * tag 'iommu-fixes-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Check correct capability for sagaw determination Revert "iommu/vt-d: Fix possible recursive locking in intel_iommu_init()"
2022-09-21Merge tag 'sound-6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bit more changes than wished, but still manageable amount. Most of commits are HD-audio specific device fixes / quirks, while there is a revert for the previous fix due to regressions and a double-free fix in ALSA core code" * tag 'sound-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare" ALSA: core: Fix double-free at snd_card_new() ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LED ALSA: hda/hdmi: Fix the converter reuse for the silent stream ALSA: hda/realtek: Add quirk for ASUS GA503R laptop ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack ALSA: hda/realtek: Re-arrange quirk table entries ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop ALSA: hda: Fix Nvidia dp infoframe ALSA: hda/realtek: Add quirk for Huawei WRT-WX9 ALSA: hda/tegra: set depop delay for tegra ALSA: hda: add Intel 5 Series / 3400 PCI DID ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation
2022-09-21Merge tag 'exfat-for-6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fix from Namjae Jeon: - fix integer overflow on large partitions * tag 'exfat-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix overflow for large capacity partition
2022-09-21KVM: s390: pci: register pci hooks without interpretationMatthew Rosato
The kvm registration hooks must be registered even if the facilities necessary for zPCI interpretation are unavailable, as vfio-pci-zdev will expect to use the hooks regardless. This fixes an issue where vfio-pci-zdev will fail its open function because of a missing kvm_register when running on hardware that does not support zPCI interpretation. Fixes: ca922fecda6c ("KVM: s390: pci: Hook to access KVM lowlevel from VFIO") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Link: https://lore.kernel.org/r/20220920193025.135655-1-mjrosato@linux.ibm.com Message-Id: <20220920193025.135655-1-mjrosato@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-09-21KVM: s390: pci: fix GAIT physical vs virtual pointers usageMatthew Rosato
The GAIT and all of its entries must be represented by physical addresses as this structure is shared with underlying firmware. We can keep a virtual address of the GAIT origin in order to handle processing in the kernel, but when traversing the entries we must again convert the physical AISB stored in that GAIT entry into a virtual address in order to process it. Note: this currently doesn't fix a real bug, since virtual addresses are indentical to physical ones. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Nico Boehr <nrb@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220907155952.87356-1-mjrosato@linux.ibm.com Message-Id: <20220907155952.87356-1-mjrosato@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-09-21KVM: s390: Pass initialized arg even if unusedJanis Schoetterl-Glausch
This silences smatch warnings reported by kbuild bot: arch/s390/kvm/gaccess.c:859 guest_range_to_gpas() error: uninitialized symbol 'prot'. arch/s390/kvm/gaccess.c:1064 access_guest_with_key() error: uninitialized symbol 'prot'. This is because it cannot tell that the value is not used in this case. The trans_exc* only examine prot if code is PGM_PROTECTION. Pass a dummy value for other codes. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220825192540.1560559-1-scgl@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-31 00:58:15 +0000