summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-15USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)Jimmy Wang
This device doesn't work well with LPM, losing connectivity intermittently. Disable LPM to resolve the issue. Reviewed-by: <markpearson@lenovo.com> Signed-off-by: Jimmy Wang <wangjm221@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211214012652.4898-1-wangjm221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15usb: xhci: Extend support for runtime power management for AMD's Yellow carp.Nehal Bakulchandra Shah
AMD's Yellow Carp platform has few more XHCI controllers, enable the runtime power management support for the same. Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15serial: 8250_fintek: Fix garbled text for consoleJi-Ze Hong (Peter Hong)
Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") introduced support to use high baudrate with Fintek SuperIO UARTs. It'll change clocksources when the UART probed. But when user add kernel parameter "console=ttyS0,115200 console=tty0" to make the UART as console output, the console will output garbled text after the following kernel message. [ 3.681188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled The issue is occurs in following step: probe_setup_port() -> fintek_8250_goto_highspeed() It change clocksource from 115200 to 921600 with wrong time, it should change clocksource in set_termios() not in probed. The following 3 patches are implemented change clocksource in fintek_8250_set_termios(). Commit 58178914ae5b ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H") Commit 195638b6d44f ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81866") Commit 423d9118c624 ("serial: 8250_fintek: Add F81966 Support") Due to the high baud rate had implemented above 3 patches and the patch Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") is bugged, So this patch will remove it. Fixes: fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20211215075835.2072-1-hpeter+linux_kernel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronousTetsuo Handa
syzbot is reporting that an unprivileged user who logged in from tty console can crash the system using a reproducer shown below [1], for n_hdlc_tty_wakeup() is synchronously calling n_hdlc_send_frames(). ---------- #include <sys/ioctl.h> #include <unistd.h> int main(int argc, char *argv[]) { const int disc = 0xd; ioctl(1, TIOCSETD, &disc); while (1) { ioctl(1, TCXONC, 0); write(1, "", 1); ioctl(1, TCXONC, 1); /* Kernel panic - not syncing: scheduling while atomic */ } } ---------- Linus suspected that "struct tty_ldisc"->ops->write_wakeup() must not sleep, and Jiri confirmed it from include/linux/tty_ldisc.h. Thus, defer n_hdlc_send_frames() from n_hdlc_tty_wakeup() to a WQ context like net/nfc/nci/uart.c does. Link: https://syzkaller.appspot.com/bug?extid=5f47a8cea6a12b77a876 [1] Reported-by: syzbot <syzbot+5f47a8cea6a12b77a876@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> Analyzed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Confirmed-by: Jiri Slaby <jirislaby@kernel.org> Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/40de8b7e-a3be-4486-4e33-1b1d1da452f8@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15ixgbe: set X550 MDIO speed before talking to PHYCyril Novikov
The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support. This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure. Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup: * Use an Atom C3000 family system with at least one X552 LAN on the SoC * Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots) * Connect a live 10Gb Ethernet cable to an X550 port * Power cycle (not reset, doesn't always work) the system and boot Linux * Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17 Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <cnovikov@lynx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15dm integrity: fix data corruption due to improper use of bvec_kmap_localMike Snitzer
Commit 25058d1c725c ("dm integrity: use bvec_kmap_local in __journal_read_write") didn't account for __journal_read_write() later adding the biovec's bv_offset. As such using bvec_kmap_local() caused the start of the biovec to be skipped. Trivial test that illustrates data corruption: # integritysetup format /dev/pmem0 # integritysetup open /dev/pmem0 integrityroot # mkfs.xfs /dev/mapper/integrityroot ... bad magic number bad magic number Metadata corruption detected at xfs_sb block 0x0/0x1000 libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000 releasing dirty buffer (bulk) to free list! Fix this by using kmap_local_page() instead of bvec_kmap_local() in __journal_read_write(). Fixes: 25058d1c725c ("dm integrity: use bvec_kmap_local in __journal_read_write") Reported-by: Tony Asleson <tasleson@redhat.com> Reviewed-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-12-15ixgbe: Document how to enable NBASE-T supportRobert Schlabbach
Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") introduced suppression of the advertisement of NBASE-T speeds by default, according to Todd Fujinaka to accommodate customers with network switches which could not cope with advertised NBASE-T speeds, as posted in the E1000-devel mailing list: https://sourceforge.net/p/e1000/mailman/message/37106269/ However, the suppression was not documented at all, nor was how to enable NBASE-T support. Properly document the NBASE-T suppression and how to enable NBASE-T support. Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15igc: Fix typo in i225 LTR functionsSasha Neftin
The LTR maximum value was incorrectly written using the scale from the LTR minimum value. This would cause incorrect values to be sent, in cases where the initial calculation lead to different min/max scales. Fixes: 707abf069548 ("igc: Add initial LTR support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15igbvf: fix double free in `igbvf_probe`Letu Ren
In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15igb: Fix removal of unicast MAC filters of VFsKaren Sornek
Move checking condition of VF MAC filter before clearing or adding MAC filter to VF to prevent potential blackout caused by removal of necessary and working VF's MAC filter. Fixes: 1b8b062a99dc ("igb: add VF trust infrastructure") Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15Merge tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "An SGID directory handling fix (marked for stable), a metrics accounting fix and two fixups to appease static checkers" * tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client: ceph: fix up non-directory creation in SGID directories ceph: initialize pathlen variable in reconnect_caps_cb ceph: initialize i_size variable in ceph_sync_read ceph: fix duplicate increment of opened_inodes metric
2021-12-15Merge tag 's390-5.16-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Add missing handling of R_390_PLT32DBL relocation type in arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3 generate such relocation entries, which our relocation code silently ignores, and which finally will result in an endless loop within the purgatory code in case of kexec. - Add proper handling of errors and print error messages when applying relocations - Fix duplicate tracking of irq nesting level in entry code - Let recordmcount.pl also look for jgnop mnemonic. Starting with binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which breaks mcount location detection. This is only a problem if used with compilers older than gcc 9, since with gcc 9 and newer compilers recordmcount.pl is not used anymore. - Remove preempt_disable()/preempt_enable() pair in kprobe_ftrace_handler() which was done for all architectures except for s390. - Update defconfig * tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: recordmcount.pl: look for jgnop instruction as well as bcrl on s390 s390/entry: fix duplicate tracking of irq nesting level s390: enable switchdev support in defconfig s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add() s390/ftrace: remove preempt_disable()/preempt_enable() pair s390/kexec_file: fix error handling when applying relocations s390/kexec_file: print some more error messages
2021-12-15Merge tag 'hyperv-fixes-signed-20211214' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fix from Wei Liu: "Build fix from Randy Dunlap" * tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
2021-12-15audit: improve robustness of the audit queue handlingPaul Moore
If the audit daemon were ever to get stuck in a stopped state the kernel's kauditd_thread() could get blocked attempting to send audit records to the userspace audit daemon. With the kernel thread blocked it is possible that the audit queue could grow unbounded as certain audit record generating events must be exempt from the queue limits else the system enter a deadlock state. This patch resolves this problem by lowering the kernel thread's socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks the kauditd_send_queue() function to better manage the various audit queues when connection problems occur between the kernel and the audit daemon. With this patch, the backlog may temporarily grow beyond the defined limits when the audit daemon is stopped and the system is under heavy audit pressure, but kauditd_thread() will continue to make progress and drain the queues as it would for other connection problems. For example, with the audit daemon put into a stopped state and the system configured to audit every syscall it was still possible to shutdown the system without a kernel panic, deadlock, etc.; granted, the system was slow to shutdown but that is to be expected given the extreme pressure of recording every syscall. The timeout value of HZ/10 was chosen primarily through experimentation and this developer's "gut feeling". There is likely no one perfect value, but as this scenario is limited in scope (root privileges would be needed to send SIGSTOP to the audit daemon), it is likely not worth exposing this as a tunable at present. This can always be done at a later date if it proves necessary. Cc: stable@vger.kernel.org Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking") Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com> Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-12-15usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probeAmelie Delaunay
When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt. Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable <stable@vger.kernel.org> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15USB: gadget: bRequestType is a bitfield, not a enumGreg Kroah-Hartman
Szymon rightly pointed out that the previous check for the endpoint direction in bRequestType was not looking at only the bit involved, but rather the whole value. Normally this is ok, but for some request types, bits other than bit 8 could be set and the check for the endpoint length could not stall correctly. Fix that up by only checking the single bit. Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests") Cc: Felipe Balbi <balbi@kernel.org> Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20211214184621.385828-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15soc/tegra: fuse: Fix bitwise vs. logical OR warningNathan Chancellor
A new warning in clang points out two instances where boolean expressions are being used with a bitwise OR instead of logical OR: drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning 2 warnings generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this instance, tegra_fuse_read_spare() is not semantically returning a boolean, it is returning a bit value. Use u32 for its return type so that it can be used with either bitwise or boolean operators without any warnings. Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification") Link: https://github.com/ClangBuiltLinux/linux/issues/1488 Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15btrfs: fix missing blkdev_put() call in btrfs_scan_one_device()Shin'ichiro Kawasaki
The function btrfs_scan_one_device() calls blkdev_get_by_path() and blkdev_put() to get and release its target block device. However, when btrfs_sb_log_location_bdev() fails, blkdev_put() is not called and the block device is left without clean up. This triggered failure of fstests generic/085. Fix the failure path of btrfs_sb_log_location_bdev() to call blkdev_put(). Fixes: 12659251ca5df ("btrfs: implement log-structured superblock for ZONED mode") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-15btrfs: fix warning when freeing leaf after subvolume creation failureFilipe Manana
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the root item for the new subvolume into the root tree, we can trigger the following warning: [78961.741046] WARNING: CPU: 0 PID: 4079814 at fs/btrfs/extent-tree.c:3357 btrfs_free_tree_block+0x2af/0x310 [btrfs] [78961.743344] Modules linked in: [78961.749440] dm_snapshot dm_thin_pool (...) [78961.773648] CPU: 0 PID: 4079814 Comm: fsstress Not tainted 5.16.0-rc4-btrfs-next-108 #1 [78961.775198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [78961.777266] RIP: 0010:btrfs_free_tree_block+0x2af/0x310 [btrfs] [78961.778398] Code: 17 00 48 85 (...) [78961.781067] RSP: 0018:ffffaa4001657b28 EFLAGS: 00010202 [78961.781877] RAX: 0000000000000213 RBX: ffff897f8a796910 RCX: 0000000000000000 [78961.782780] RDX: 0000000000000000 RSI: 0000000011004000 RDI: 00000000ffffffff [78961.783764] RBP: ffff8981f490e800 R08: 0000000000000001 R09: 0000000000000000 [78961.784740] R10: 0000000000000000 R11: 0000000000000001 R12: ffff897fc963fcc8 [78961.785665] R13: 0000000000000001 R14: ffff898063548000 R15: ffff898063548000 [78961.786620] FS: 00007f31283c6b80(0000) GS:ffff8982ace00000(0000) knlGS:0000000000000000 [78961.787717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [78961.788598] CR2: 00007f31285c3000 CR3: 000000023fcc8003 CR4: 0000000000370ef0 [78961.789568] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [78961.790585] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [78961.791684] Call Trace: [78961.792082] <TASK> [78961.792359] create_subvol+0x5d1/0x9a0 [btrfs] [78961.793054] btrfs_mksubvol+0x447/0x4c0 [btrfs] [78961.794009] ? preempt_count_add+0x49/0xa0 [78961.794705] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [78961.795712] ? _copy_from_user+0x66/0xa0 [78961.796382] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [78961.797392] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [78961.798172] ? __slab_free+0x10a/0x360 [78961.798820] ? rcu_read_lock_sched_held+0x12/0x60 [78961.799664] ? lock_release+0x223/0x4a0 [78961.800321] ? lock_acquired+0x19f/0x420 [78961.800992] ? rcu_read_lock_sched_held+0x12/0x60 [78961.801796] ? trace_hardirqs_on+0x1b/0xe0 [78961.802495] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [78961.803358] ? kmem_cache_free+0x321/0x3c0 [78961.804071] ? __x64_sys_ioctl+0x83/0xb0 [78961.804711] __x64_sys_ioctl+0x83/0xb0 [78961.805348] do_syscall_64+0x3b/0xc0 [78961.805969] entry_SYSCALL_64_after_hwframe+0x44/0xae [78961.806830] RIP: 0033:0x7f31284bc957 [78961.807517] Code: 3c 1c 48 f7 d8 (...) This is because we are calling btrfs_free_tree_block() on an extent buffer that is dirty. Fix that by cleaning the extent buffer, with btrfs_clean_tree_block(), before freeing it. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-15btrfs: fix invalid delayed ref after subvolume creation failureFilipe Manana
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-15btrfs: check WRITE_ERR when trying to read an extent bufferJosef Bacik
Filipe reported a hang when we have errors on btrfs. This turned out to be a side-effect of my fix c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") which made it so we clear EXTENT_BUFFER_UPTODATE on an eb when we fail to write it out. Below is a paste of Filipe's analysis he got from using drgn to debug the hang """ btree readahead code calls read_extent_buffer_pages(), sets ->io_pages to a value while writeback of all pages has not yet completed: --> writeback for the first 3 pages finishes, we clear EXTENT_BUFFER_UPTODATE from eb on the first page when we get an error. --> at this point eb->io_pages is 1 and we cleared Uptodate bit from the first 3 pages --> read_extent_buffer_pages() does not see EXTENT_BUFFER_UPTODATE() so it continues, it's able to lock the pages since we obviously don't hold the pages locked during writeback --> read_extent_buffer_pages() then computes 'num_reads' as 3, and sets eb->io_pages to 3, since only the first page does not have Uptodate bit set at this point --> writeback for the remaining page completes, we ended decrementing eb->io_pages by 1, resulting in eb->io_pages == 2, and therefore never calling end_extent_buffer_writeback(), so EXTENT_BUFFER_WRITEBACK remains in the eb's flags --> of course, when the read bio completes, it doesn't and shouldn't call end_extent_buffer_writeback() --> we should clear EXTENT_BUFFER_UPTODATE only after all pages of the eb finished writeback? or maybe make the read pages code wait for writeback of all pages of the eb to complete before checking which pages need to be read, touch ->io_pages, submit read bio, etc writeback bit never cleared means we can hang when aborting a transaction, at: btrfs_cleanup_one_transaction() btrfs_destroy_marked_extents() wait_on_extent_buffer_writeback() """ This is a problem because our writes are not synchronized with reads in any way. We clear the UPTODATE flag and then we can easily come in and try to read the EB while we're still waiting on other bio's to complete. We have two options here, we could lock all the pages, and then check to see if eb->io_pages != 0 to know if we've already got an outstanding write on the eb. Or we can simply check to see if we have WRITE_ERR set on this extent buffer. We set this bit _before_ we clear UPTODATE, so if the read gets triggered because we aren't UPTODATE because of a write error we're guaranteed to have WRITE_ERR set, and in this case we can simply return -EIO. This will fix the reported hang. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-15Merge tag 'wireless-drivers-2021-12-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 Second set of fixes for v5.16, hopefully also the last one. I changed my email in MAINTAINERS, one crash fix in iwlwifi and some build problems fixed. iwlwifi * fix crash caused by a warning * fix LED linking problem brcmsmac * rework LED dependencies for being consistent with other drivers mt76 * mt7921: fix build regression ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-15Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-14 This series contains updates to ice driver only. Karol corrects division that was causing incorrect calculations and adds a check to ensure stale timestamps are not being used. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14bpf, selftests: Update test case for atomic cmpxchg on r0 with pointerDaniel Borkmann
Fix up unprivileged test case results for 'Dest pointer in r0' verifier tests given they now need to reject R0 containing a pointer value, and add a couple of new related ones with 32bit cmpxchg as well. root@foo:~/bpf/tools/testing/selftests/bpf# ./test_verifier #0/u invalid and of negative number OK #0/p invalid and of negative number OK [...] #1268/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK #1269/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK #1270/p XDP pkt read, pkt_data <= pkt_meta', good access OK #1271/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK #1272/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK Summary: 1900 PASSED, 0 SKIPPED, 0 FAILED Acked-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-12-14bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux regDaniel Borkmann
The implementation of BPF_CMPXCHG on a high level has the following parameters: .-[old-val] .-[new-val] BPF_R0 = cmpxchg{32,64}(DST_REG + insn->off, BPF_R0, SRC_REG) `-[mem-loc] `-[old-val] Given a BPF insn can only have two registers (dst, src), the R0 is fixed and used as an auxilliary register for input (old value) as well as output (returning old value from memory location). While the verifier performs a number of safety checks, it misses to reject unprivileged programs where R0 contains a pointer as old value. Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the guessed address into the map slot as a scalar, and using the map value pointer as R0 while SRC_REG has a canary value to detect a matching address. Fix it by checking R0 for pointers, and reject if that's the case for unprivileged programs. Fixes: 5ffa25502b5a ("bpf: Add instructions for atomic_[cmp]xchg") Reported-by: Ryota Shiga (Flatt Security) Acked-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-12-14bpf, selftests: Add test case for atomic fetch on spilled pointerDaniel Borkmann
Test whether unprivileged would be able to leak the spilled pointer either by exporting the returned value from the atomic{32,64} operation or by reading and exporting the value from the stack after the atomic operation took place. Note that for unprivileged, the below atomic cmpxchg test case named "Dest pointer in r0 - succeed" is failing. The reason is that in the dst memory location (r10 -8) there is the spilled register r10: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (bf) r0 = r10 1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (7b) *(u64 *)(r10 -8) = r0 2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp 2: (b7) r1 = 0 3: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=fp 3: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r1) 4: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm 4: (79) r1 = *(u64 *)(r0 -8) 5: R0_w=fp0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm 5: (b7) r0 = 0 6: R0_w=invP0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm 6: (95) exit However, allowing this case for unprivileged is a bit useless given an update with a new pointer will fail anyway: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (bf) r0 = r10 1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (7b) *(u64 *)(r10 -8) = r0 2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp 2: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r10) R10 leaks addr into mem Acked-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-12-14bpf: Fix kernel address leakage in atomic fetchDaniel Borkmann
The change in commit 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since this would allow for unprivileged users to leak kernel pointers. For example, an atomic fetch/and with -1 on a stack destination which holds a spilled pointer will migrate the spilled register type into a scalar, which can then be exported out of the program (since scalar != pointer) by dumping it into a map value. The original implementation of XADD was preventing this situation by using a double call to check_mem_access() one with BPF_READ and a subsequent one with BPF_WRITE, in both cases passing -1 as a placeholder value instead of register as per XADD semantics since it didn't contain a value fetch. The BPF_READ also included a check in check_stack_read_fixed_off() which rejects the program if the stack slot is of __is_pointer_value() if dst_regno < 0. The latter is to distinguish whether we're dealing with a regular stack spill/ fill or some arithmetical operation which is disallowed on non-scalars, see also 6e7e63cbb023 ("bpf: Forbid XADD on spilled pointers for unprivileged users") for more context on check_mem_access() and its handling of placeholder value -1. One minimally intrusive option to fix the leak is for the BPF_FETCH case to initially check the BPF_READ case via check_mem_access() with -1 as register, followed by the actual load case with non-negative load_reg to propagate stack bounds to registers. Fixes: 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") Reported-by: <n4ke4mry@gmail.com> Acked-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-12-14bcache: fix NULL pointer reference in cached_dev_detach_finishLin Feng
Commit 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") tries to fix calc_cached_dev_sectors when bcache device detaches, but now we have: cached_dev_detach_finish ... bcache_device_detach(&dc->disk); ... closure_put(&d->c->caching); d->c = NULL; [*explicitly set dc->disk.c to NULL*] list_move(&dc->list, &uncached_devices); calc_cached_dev_sectors(dc->disk.c); [*passing a NULL pointer*] ... Upper codeflows shows how bug happens, this patch fix the problem by caching dc->disk.c beforehand, and cache_set won't be freed under us because c->caching closure at least holds a reference count and closure callback __cache_set_unregister only being called by bch_cache_set_stop which using closure_queue(&c->caching), that means c->caching closure callback for destroying cache_set won't be trigger by previous closure_put(&d->c->caching). So at this stage(while cached_dev_detach_finish is calling) it's safe to access cache_set dc->disk.c. Fixes: 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") Signed-off-by: Lin Feng <linf@wangsu.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211112053629.3437-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-14block: reduce kblockd_mod_delayed_work_on() CPU consumptionJens Axboe
Dexuan reports that he's seeing spikes of very heavy CPU utilization when running 24 disks and using the 'none' scheduler. This happens off the sched restart path, because SCSI requires the queue to be restarted async, and hence we're hammering on mod_delayed_work_on() to ensure that the work item gets run appropriately. Avoid hammering on the timer and just use queue_work_on() if no delay has been specified. Reported-and-tested-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/linux-block/BYAPR21MB1270C598ED214C0490F47400BF719@BYAPR21MB1270.namprd21.prod.outlook.com/ Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-14Merge branch 'mptcp-fixes-for-ulp-a-deadlock-and-netlink-docs'Jakub Kicinski
Mat Martineau says: ==================== mptcp: Fixes for ULP, a deadlock, and netlink docs Two of the MPTCP fixes in this set are related to the TCP_ULP socket option with MPTCP sockets operating in "fallback" mode (the connection has reverted to regular TCP). The other issues are an observed deadlock and missing parameter documentation in the MPTCP netlink API. Patch 1 marks TCP_ULP as unsupported earlier in MPTCP setsockopt code, so the fallback code path in the MPTCP layer does not pass the TCP_ULP option down to the subflow TCP socket. Patch 2 makes sure a TCP fallback socket returned to userspace by accept()ing on a MPTCP listening socket does not allow use of the "mptcp" TCP_ULP type. That ULP is intended only for use by in-kernel MPTCP subflows. Patch 3 fixes the possible deadlock when sending data and there are socket option changes to sync to the subflows. Patch 4 makes sure all MPTCP netlink event parameters are documented in the MPTCP uapi header. ==================== Link: https://lore.kernel.org/r/20211214231604.211016-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14mptcp: add missing documented NL paramsMatthieu Baerts
'loc_id' and 'rem_id' are set in all events linked to subflows but those were missing in the events description in the comments. Fixes: b911c97c7dc7 ("mptcp: add netlink event support") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14mptcp: fix deadlock in __mptcp_push_pending()Maxim Galaganov
__mptcp_push_pending() may call mptcp_flush_join_list() with subflow socket lock held. If such call hits mptcp_sockopt_sync_all() then subsequently __mptcp_sockopt_sync() could try to lock the subflow socket for itself, causing a deadlock. sysrq: Show Blocked State task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x2d6/0x10c0 ? __mod_memcg_state+0x4d/0x70 ? csum_partial+0xd/0x20 ? _raw_spin_lock_irqsave+0x26/0x50 schedule+0x4e/0xc0 __lock_sock+0x69/0x90 ? do_wait_intr_irq+0xa0/0xa0 __lock_sock_fast+0x35/0x50 mptcp_sockopt_sync_all+0x38/0xc0 __mptcp_push_pending+0x105/0x200 mptcp_sendmsg+0x466/0x490 sock_sendmsg+0x57/0x60 __sys_sendto+0xf0/0x160 ? do_wait_intr_irq+0xa0/0xa0 ? fpregs_restore_userregs+0x12/0xd0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9ba546c2d0 RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0 RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234 RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060 R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8 </TASK> Fix the issue by using __mptcp_flush_join_list() instead of plain mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by Florian. The sockopt sync will be deferred to the workqueue. Fixes: 1b3e7ede1365 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/244 Suggested-by: Florian Westphal <fw@strlen.de> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Maxim Galaganov <max@internet.ru> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14mptcp: clear 'kern' flag from fallback socketsFlorian Westphal
The mptcp ULP extension relies on sk->sk_sock_kern being set correctly: It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from working for plain tcp sockets (any userspace-exposed socket). But in case of fallback, accept() can return a plain tcp sk. In such case, sk is still tagged as 'kernel' and setsockopt will work. This will crash the kernel, The subflow extension has a NULL ctx->conn mptcp socket: BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0 Call Trace: tcp_data_ready+0xf8/0x370 [..] Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14mptcp: remove tcp ulp setsockopt supportFlorian Westphal
TCP_ULP setsockopt cannot be used for mptcp because its already used internally to plumb subflow (tcp) sockets to the mptcp layer. syzbot managed to trigger a crash for mptcp connections that are in fallback mode: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0 RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline] [..] __tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline] tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160 do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391 mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638 Remove support for TCP_ULP setsockopt. Fixes: d9e4c1291810 ("mptcp: only admit explicitly supported sockopt") Reported-by: syzbot+1fd9b69cde42967d1add@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14drm/amd/pm: fix a potential gpu_metrics_table memory leakLang Yu
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it! Fixes: 95868b85764a ("drm/amd/powerplay: add Renoir support for gpu metrics export") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amdgpu: correct the wrong cached state for GMC on PICASSOEvan Quan
Pair the operations did in GMC ->hw_init and ->hw_fini. That can help to maintain correct cached state for GMC and avoid unintention gate operation dropping due to wrong cached state. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828 Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Reset DMCUB before HW initNicholas Kazlauskas
[Why] If the firmware wasn't reset by PSP or HW and is currently running then the firmware will hang or perform underfined behavior when we modify its firmware state underneath it. [How] Reset DMCUB before setting up cache windows and performing HW init. Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Set exit_optimized_pwr_state for DCN31Nicholas Kazlauskas
[Why] SMU now respects the PHY refclk disable request from driver. This causes a hang during hotplug when PHY refclk was disabled because it's not being re-enabled and the transmitter control starts on dc_link_detect. [How] We normally would re-enable the clk with exit_optimized_pwr_state but this is only set on DCN21 and DCN301. Set it for dcn31 as well. This fixes DMCUB timeouts in the PHY. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YCMario Limonciello
This value does not get cached into adev->pm.fw_version during startup for smu13 like it does for other SMU like smu12. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14drm/amdgpu: don't override default ECO_BITs settingHawking Zhang
Leave this bit as hardware default setting Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORELe Ma
should count on GC IP base address Signed-off-by: Le Ma <le.ma@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14signal: Skip the altstack update when not neededChang S. Bae
== Background == Support for large, "dynamic" fpstates was recently merged. This included code to ensure that sigaltstacks are sufficiently sized for these large states. A new lock was added to remove races between enabling large features and setting up sigaltstacks. == Problem == The new lock (sigaltstack_lock()) is acquired in the sigreturn path before restoring the old sigaltstack. Unfortunately, contention on the new lock causes a measurable signal handling performance regression [1]. However, the common case is that no *changes* are made to the sigaltstack state at sigreturn. == Solution == do_sigaltstack() acquires sigaltstack_lock() and is used for both sys_sigaltstack() and restoring the sigaltstack in sys_sigreturn(). Check for changes to the sigaltstack before taking the lock. If no changes were made, return before acquiring the lock. This removes lock contention from the common-case sigreturn path. [1] https://lore.kernel.org/lkml/20211207012128.GA16074@xsang-OptiPlex-9020/ Fixes: 3aac3ebea08f ("x86/signal: Implement sigaltstack size validation") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20211210225503.12734-1-chang.seok.bae@intel.com
2021-12-14ice: Don't put stale timestamps in the skbKarol Kolacinski
The driver has to check if it does not accidentally put the timestamp in the SKB before previous timestamp gets overwritten. Timestamp values in the PHY are read only and do not get cleared except at hardware reset or when a new timestamp value is captured. The cached_tstamp field is used to detect the case where a new timestamp has not yet been captured, ensuring that we avoid sending stale timestamp data to the stack. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ice: Use div64_u64 instead of div_u64 in adjfineKarol Kolacinski
Change the division in ice_ptp_adjfine from div_u64 to div64_u64. div_u64 is used when the divisor is 32 bit but in this case incval is 64 bit and it caused incorrect calculations and incval adjustments. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14btrfs: fix missing last dir item offset update when logging directoryFilipe Manana
When logging a directory, once we finish processing a leaf that is full of dir items, if we find the next leaf was not modified in the current transaction, we grab the first key of that next leaf and log it as to mark the end of a key range boundary. However we did not update the value of ctx->last_dir_item_offset, which tracks the offset of the last logged key. This can result in subsequent logging of the same directory in the current transaction to not realize that key was already logged, and then add it to the middle of a batch that starts with a lower key, resulting later in a leaf with one key that is duplicated and at non-consecutive slots. When that happens we get an error later when writing out the leaf, reporting that there is a pair of keys in wrong order. The report is something like the following: Dec 13 21:44:50 kernel: BTRFS critical (device dm-0): corrupt leaf: root=18446744073709551610 block=118444032 slot=21, bad key order, prev (704687 84 4146773349) current (704687 84 1063561078) Dec 13 21:44:50 kernel: BTRFS info (device dm-0): leaf 118444032 gen 91449 total ptrs 39 free space 546 owner 18446744073709551610 Dec 13 21:44:50 kernel: item 0 key (704687 1 0) itemoff 3835 itemsize 160 Dec 13 21:44:50 kernel: inode generation 35532 size 1026 mode 40755 Dec 13 21:44:50 kernel: item 1 key (704687 12 704685) itemoff 3822 itemsize 13 Dec 13 21:44:50 kernel: item 2 key (704687 24 3817753667) itemoff 3736 itemsize 86 Dec 13 21:44:50 kernel: item 3 key (704687 60 0) itemoff 3728 itemsize 8 Dec 13 21:44:50 kernel: item 4 key (704687 72 0) itemoff 3720 itemsize 8 Dec 13 21:44:50 kernel: item 5 key (704687 84 140445108) itemoff 3666 itemsize 54 Dec 13 21:44:50 kernel: dir oid 704793 type 1 Dec 13 21:44:50 kernel: item 6 key (704687 84 298800632) itemoff 3599 itemsize 67 Dec 13 21:44:50 kernel: dir oid 707849 type 2 Dec 13 21:44:50 kernel: item 7 key (704687 84 476147658) itemoff 3532 itemsize 67 Dec 13 21:44:50 kernel: dir oid 707901 type 2 Dec 13 21:44:50 kernel: item 8 key (704687 84 633818382) itemoff 3471 itemsize 61 Dec 13 21:44:50 kernel: dir oid 704694 type 2 Dec 13 21:44:50 kernel: item 9 key (704687 84 654256665) itemoff 3403 itemsize 68 Dec 13 21:44:50 kernel: dir oid 707841 type 1 Dec 13 21:44:50 kernel: item 10 key (704687 84 995843418) itemoff 3331 itemsize 72 Dec 13 21:44:50 kernel: dir oid 2167736 type 1 Dec 13 21:44:50 kernel: item 11 key (704687 84 1063561078) itemoff 3278 itemsize 53 Dec 13 21:44:50 kernel: dir oid 704799 type 2 Dec 13 21:44:50 kernel: item 12 key (704687 84 1101156010) itemoff 3225 itemsize 53 Dec 13 21:44:50 kernel: dir oid 704696 type 1 Dec 13 21:44:50 kernel: item 13 key (704687 84 2521936574) itemoff 3173 itemsize 52 Dec 13 21:44:50 kernel: dir oid 704704 type 2 Dec 13 21:44:50 kernel: item 14 key (704687 84 2618368432) itemoff 3112 itemsize 61 Dec 13 21:44:50 kernel: dir oid 704738 type 1 Dec 13 21:44:50 kernel: item 15 key (704687 84 2676316190) itemoff 3046 itemsize 66 Dec 13 21:44:50 kernel: dir oid 2167729 type 1 Dec 13 21:44:50 kernel: item 16 key (704687 84 3319104192) itemoff 2986 itemsize 60 Dec 13 21:44:50 kernel: dir oid 704745 type 2 Dec 13 21:44:50 kernel: item 17 key (704687 84 3908046265) itemoff 2929 itemsize 57 Dec 13 21:44:50 kernel: dir oid 2167734 type 1 Dec 13 21:44:50 kernel: item 18 key (704687 84 3945713089) itemoff 2857 itemsize 72 Dec 13 21:44:50 kernel: dir oid 2167730 type 1 Dec 13 21:44:50 kernel: item 19 key (704687 84 4077169308) itemoff 2795 itemsize 62 Dec 13 21:44:50 kernel: dir oid 704688 type 1 Dec 13 21:44:50 kernel: item 20 key (704687 84 4146773349) itemoff 2727 itemsize 68 Dec 13 21:44:50 kernel: dir oid 707892 type 1 Dec 13 21:44:50 kernel: item 21 key (704687 84 1063561078) itemoff 2674 itemsize 53 Dec 13 21:44:50 kernel: dir oid 704799 type 2 Dec 13 21:44:50 kernel: item 22 key (704687 96 2) itemoff 2612 itemsize 62 Dec 13 21:44:50 kernel: item 23 key (704687 96 6) itemoff 2551 itemsize 61 Dec 13 21:44:50 kernel: item 24 key (704687 96 7) itemoff 2498 itemsize 53 Dec 13 21:44:50 kernel: item 25 key (704687 96 12) itemoff 2446 itemsize 52 Dec 13 21:44:50 kernel: item 26 key (704687 96 14) itemoff 2385 itemsize 61 Dec 13 21:44:50 kernel: item 27 key (704687 96 18) itemoff 2325 itemsize 60 Dec 13 21:44:50 kernel: item 28 key (704687 96 24) itemoff 2271 itemsize 54 Dec 13 21:44:50 kernel: item 29 key (704687 96 28) itemoff 2218 itemsize 53 Dec 13 21:44:50 kernel: item 30 key (704687 96 62) itemoff 2150 itemsize 68 Dec 13 21:44:50 kernel: item 31 key (704687 96 66) itemoff 2083 itemsize 67 Dec 13 21:44:50 kernel: item 32 key (704687 96 75) itemoff 2015 itemsize 68 Dec 13 21:44:50 kernel: item 33 key (704687 96 79) itemoff 1948 itemsize 67 Dec 13 21:44:50 kernel: item 34 key (704687 96 82) itemoff 1882 itemsize 66 Dec 13 21:44:50 kernel: item 35 key (704687 96 83) itemoff 1810 itemsize 72 Dec 13 21:44:50 kernel: item 36 key (704687 96 85) itemoff 1753 itemsize 57 Dec 13 21:44:50 kernel: item 37 key (704687 96 87) itemoff 1681 itemsize 72 Dec 13 21:44:50 kernel: item 38 key (704694 1 0) itemoff 1521 itemsize 160 Dec 13 21:44:50 kernel: inode generation 35534 size 30 mode 40755 Dec 13 21:44:50 kernel: BTRFS error (device dm-0): block=118444032 write time tree block corruption detected So fix that by adding the missing update of ctx->last_dir_item_offset with the offset of the boundary key. Reported-by: Chris Murphy <lists@colorremedies.com> Link: https://lore.kernel.org/linux-btrfs/CAJCQCtT+RSzpUjbMq+UfzNUMe1X5+1G+DnAGbHC=OZ=iRS24jg@mail.gmail.com/ Fixes: dc2872247ec0ca ("btrfs: keep track of the last logged keys when logging a directory") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-14btrfs: fix double free of anon_dev after failure to create subvolumeFilipe Manana
When creating a subvolume, at create_subvol(), we allocate an anonymous device and later call btrfs_get_new_fs_root(), which in turn just calls btrfs_get_root_ref(). There we call btrfs_init_fs_root() which assigns the anonymous device to the root, but if after that call there's an error, when we jump to 'fail' label, we call btrfs_put_root(), which frees the anonymous device and then returns an error that is propagated back to create_subvol(). Than create_subvol() frees the anonymous device again. When this happens, if the anonymous device was not reallocated after the first time it was freed with btrfs_put_root(), we get a kernel message like the following: (...) [13950.282466] BTRFS: error (device dm-0) in create_subvol:663: errno=-5 IO failure [13950.283027] ida_free called for id=65 which is not allocated. [13950.285974] BTRFS info (device dm-0): forced readonly (...) If the anonymous device gets reallocated by another btrfs filesystem or any other kernel subsystem, then bad things can happen. So fix this by setting the root's anonymous device to 0 at btrfs_get_root_ref(), before we call btrfs_put_root(), if an error happened. Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-14btrfs: fix memory leak in __add_inode_ref()Jianglei Nie
Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } Fixes: d3316c8233bb ("btrfs: Properly handle backref_in_log retval") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-14selftests/bpf: Fix OOB write in test_verifierKumar Kartikeya Dwivedi
The commit referenced below added fixup_map_timer support (to create a BPF map containing timers), but failed to increase the size of the map_fds array, leading to out of bounds write. Fix this by changing MAX_NR_MAPS to 22. Fixes: e60e6962c503 ("selftests/bpf: Add tests for restricted helpers") Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211214014800.78762-1-memxor@gmail.com
2021-12-14xsk: Do not sleep in poll() when need_wakeup setMagnus Karlsson
Do not sleep in poll() when the need_wakeup flag is set. When this flag is set, the application needs to explicitly wake up the driver with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx and/or Tx processing will be processed promptly. But the current code in poll(), sleeps first then wakes up the driver. This means that no driver processing will occur (baring any interrupts) until the timeout has expired. Fix this by checking the need_wakeup flag first and if set, wake the driver and return to the application. Only if need_wakeup is not set should the process sleep if there is a timeout set in the poll() call. Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Reported-by: Keith Wiles <keith.wiles@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20211214102607.7677-1-magnus.karlsson@gmail.com
2021-12-14iocost: Fix divide-by-zero on donation from low hweight cgroupTejun Heo
The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: f1de2439ec43 ("blk-iocost: revamp donation amount determination") Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/r/Ybfh86iSvpWKxhVM@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 01:38:51 +0000