summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-05Input: elants_i2c - avoid divide by 0 errors on bad touchscreen dataGuenter Roeck
The following crash may be seen if bad data is received from the touchscreen. [ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff [ 2189.430738] divide error: 0000 [#1] PREEMPT SMP [ 2189.434679] gsmi: Log Shutdown Reason 0x03 [ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231 fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G W 3.18.0-13101-g57e8190 #1 [ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016 [ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000 [ 2189.434913] RIP: 0010:[<ffffffffbecc48d5>] [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.434937] RSP: 0018:ffff88017a2bfd98 EFLAGS: 00010293 [ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8 [ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 [ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000 [ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800 [ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80 [ 2189.435011] FS: 0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 2189.435022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0 [ 2189.435039] Stack: [ 2189.435044] ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574 [ 2189.435060] 0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53 [ 2189.435074] ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574 [ 2189.435089] Call Trace: [ 2189.435101] [<ffffffffbe8a2a53>] ? irq_thread_dtor+0xa9/0xa9 [ 2189.435112] [<ffffffffbe8a2a73>] irq_thread_fn+0x20/0x40 [ 2189.435123] [<ffffffffbe8a2be1>] irq_thread+0x14e/0x222 [ 2189.435135] [<ffffffffbee8cbeb>] ? __schedule+0x3b3/0x57a [ 2189.435145] [<ffffffffbe8a29aa>] ? wake_threads_waitq+0x2d/0x2d [ 2189.435156] [<ffffffffbe8a2a93>] ? irq_thread_fn+0x40/0x40 [ 2189.435168] [<ffffffffbe87c385>] kthread+0x10e/0x116 [ 2189.435178] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435189] [<ffffffffbee900ac>] ret_from_fork+0x7c/0xb0 [ 2189.435199] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c 24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 <f7> ff 83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac [ 2189.435312] RIP [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.435323] RSP <ffff88017a2bfd98> [ 2189.435350] ---[ end trace f4945345a75d96dd ]--- [ 2189.443841] Kernel panic - not syncing: Fatal exception [ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2189.444519] gsmi: Log Shutdown Reason 0x02 The problem was seen with a 3.18 based kernel, but there is no reason to believe that the upstream code is safe. Fixes: 66aee90088da2 ("Input: add support for Elan eKTH I2C touchscreens") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-03Input: adxl34x - make it enumerable in ACPI environmentAndy Shevchenko
The ACPI-enabled platform may contain _DSD method to enable this driver using compatible string. Remove OF specifics to re-use existing code on ACPI-enabled platforms. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-03Input: ALPS - fix TrackStick Y axis handling for SS5 hardwarePaul Donohue
A minus character was lost in commit 23fce365, causing the Y axis to be inverted for SS5 TrackStick events. (Pushing the TrackStick up caused the pointer to move down, and vice versa.) Restore the lost minus. Fixes: 23fce365c6a2 ("Input: ALPS - clean up code for SS5 hardware") Signed-off-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-29Merge branch 'synaptics-rmi4' into for-linusDmitry Torokhov
This brings in fix for F03 build error when serio is module.
2016-12-27Input: synaptics-rmi4 - fix F03 build error when serio is moduleDmitry Torokhov
Since F03 is a boolean, "depends" on symbols that can be modules do not work quite right. We can enable F03 if SERIO is built-in or if both RMI core and SERIO core are modules. If SERIO core is module, but RMI is built-in, we'll get: drivers/built-in.o: In function `rmi_f03_attention': rmi_f03.c:(.text+0xf8ef8): undefined reference to `serio_interrupt' rmi_f03.c:(.text+0xf8fbd): undefined reference to `serio_interrupt' drivers/built-in.o: In function `rmi_f03_remove': rmi_f03.c:(.text+0xf9082): undefined reference to `serio_unregister_port' drivers/built-in.o: In function `rmi_f03_probe': rmi_f03.c:(.text+0xf9260): undefined reference to `__serio_register_port' Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-27Input: xpad - use correct product id for x360w controllersPavel Rojtberg
currently the controllers get the same product id as the wireless receiver. However the controllers actually have their own product id. The patch makes the driver expose the same product id as the windows driver. This improves compatibility when running applications with WINE. see https://github.com/paroj/xpad/issues/54 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-18Input: synaptics_i2c - change msleep to usleep_range for small msecsAniroop Mathur
msleep(1~20) may not do what the caller intends, and will often sleep longer. (~20 ms actual sleep for any value given in the 1~20ms range) This is not the desired behaviour for many cases like device resume time, device suspend time, device enable time, retry logic, etc. Thus, change msleep to usleep_range for precise wakeups. Signed-off-by: Aniroop Mathur <a.mathur@samsung.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-18Input: i8042 - add Pegatron touchpad to noloop tableMarcos Paulo de Souza
Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able to recognize a Synaptics touchpad in the AUX port. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791 (Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B)) Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-18Input: joydev - remove unused linux/miscdevice.h includeCorentin Labbe
This patch remove the inclusion of linux/miscdevice.h for joydev since it does not use miscdevice. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-16Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.10 merge window.
2016-12-15Merge branch 'synaptics-rmi4' into nextDmitry Torokhov
Merge updated Synaptics RMI4 support, including support for SMBus controllers and flashing firmware.
2016-12-15Input: imx6ul_tsc - generalize the averaging propertyGuy Shapiro
Make the avarage-samples property a general touchscreen property rather than imx6ul device specific. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: drv260x - use generic device propertiesJingkui Wang
Update driver drv260x to use generic device properties so that it can be used on non-DT systems. We also remove platform data as generic device properties work on static board code as well. Signed-off-by: Jingkui Wang <jkwang@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: drv260x - use temporary for &client->devDmitry Torokhov
Let's introduce a temporary for "client->dev" is probe() as we use it quite a few times and "dev" is shorter. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: drv260x - fix input device's parent assignmentJingkui Wang
We were assigning I2C bus controller instead of client as parent device. Besides being logically wrong, it messed up with devm handling of input device. As a result we were leaving input device and event node behind after rmmod-ing the driver, which lead to a kernel oops if one were to access the event node later. Let's remove the assignment and rely on devm_input_allocate_device() to set it up properly for us. Signed-off-by: Jingkui Wang <jkwang@google.com> Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: synaptics-rmi4 - add support for F34 V7 bootloaderNick Dyer
Port firmware update code from Samsung Galaxy S7 driver into mainline framework. This patch has been tested on Synaptics S7813. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: drv260x - fix initializing overdrive voltageDmitry Torokhov
We were accidentally initializing haptics->rated_voltage twice, and did not initialize overdrive voltage. Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: ALPS - fix protcol -> protocolMarcos Paulo de Souza
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: i8042 - comment #else/#endif of CONFIG_PNPMarcos Paulo de Souza
As this define check if huge, this makes easier to read the code. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-07Input: lpc32xx-keys - fix invalid error handling of a requested irqVladimir Zapolskiy
Semantics of NR_IRQS is different on machines with SPARSE_IRQ option disabled or enabled, in the latter case IRQs are allocated starting at least from the value specified by NR_IRQS and going upwards, so the check of (irq >= NR_IRQ) to decide about an error code returned by platform_get_irq() is completely invalid, don't attempt to overrule irq subsystem in the driver. The change fixes lpc32xx_keys driver initialization on boot: lpc32xx_keys 40050000.key: failed to get platform irq lpc32xx_keys: probe of 40050000.key failed with error -22 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-07Input: synaptics-rmi4 - fix debug for sensor clipNick Dyer
The debug would only ever output zero for the clip information. Signed-off-by: Nick Dyer <nick@shmanahar.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - store the attn data in the driverBenjamin Tissoires
Now that we have a proper API to set the attention data, there is no point in keeping it in the transport driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - allow to add attention dataBenjamin Tissoires
The HID implementation of RMI4 provides the data during the interrupt (in the input report). We need to provide a way for this transport driver to provide the attention data while calling an IRQ. We use a fifo in rmi_core to not lose any incoming event. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - f03 - grab data passed by transport deviceDennis Wassenberg
First check if there are data available passed by the transport device. If data available use these data. If there are no data available try to read the rmi block if dsata are passed this way. This is the way the other rmi function handlers will do this. This patch is needed on HID devices because the firmware reads F03 data registers and adds them to the HID attention report. Reading those registers from the driver after the firmware read them will result in invalid data. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - add support for F03Lyude Paul
This adds basic functionality for PS/2 passthrough on Synaptics Touchpads using RMI4 through smbus. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Lyude Paul <thatslyude@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: imx6ul_tsc - convert int to u32Guy Shapiro
The code uses of_property_read_u32 and expects positive values. However, the values are stored in signed int variables. Additionally, the registers values are also stored in signed variables without a good reason (readl/writel expect u32). The only time this caused a real bug was in the new average-samples property, in which the property is numerically compared and implicitly expected to be positive. I believe it's better to change all the properties and registers to u32, for consistency and warnings reduction. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: imx6ul_tsc - add mask when set REG_ADC_CFGHaibo Chen
Add mask of each function bits of REG_ADC_CFG, and clear these function bits first, otherwise use '|=' operation may get the wrong setting which depends on the original value of REG_ADC_CFG. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - have only one struct platform dataBenjamin Tissoires
If struct rmi_device_platform_data contains pointers to other struct, it gets difficult to allocate a fixed size struct and copy it over between drivers. Change the pointers into a struct and change the code in rmi4 accordingly. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functionsBenjamin Tissoires
those functions should not be used outside of rmi_core.ko. There is no point in exporting them to the world. It looks like rmi_read_pdt_entry() should be static too. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - remove mutex calls while updating the firmwareBenjamin Tissoires
This partially reverts commit 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash") irq_mutex should be used only to protect data->current_irq_mask, not preventing incoming input to be processed while the upgrade of the firmware is happening. We can simply disable the irqs when we don't want them to interfere with the upgrade process. Tested on S7300 and S7800 (with F34 v7 patch added) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: drv2667 - fix misuse of regmap_update_bitsFlorian Vaussard
Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the DRV2667_STANDBY mask, which equals (1 << 6). Fix the driver to make it consistent with the API, and fix the alignment problem at the same time. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: drv2665 - fix misuse of regmap_update_bitsFlorian Vaussard
Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the DRV2665_STANDBY mask, which equals BIT(6). Fix the driver to make it consistent with the API, and fix the alignment problem at the same time. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - add rmi_enable/disable_irqBenjamin Tissoires
Set the .enabled boolean and trigger an event processing when enabling for edge-triggered systems. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - remove unused fields in struct rmi_driver_dataBenjamin Tissoires
These fields are not used anywhere, there is no point in carrying them. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - fix documentation of rmi_2d_sensor_platform_dataBenjamin Tissoires
Typos... Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: change KEY_DATA from 0x275 to 0x277Ping Cheng
0x275 is used by KEY_FASTREVERSE. Fixes: 488326947cd1 ("Input: add HDMI CEC specific keycodes") Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-28Input: ALPS - clean up code for SS5 hardwarePaul Donohue
The return value of alps_get_pkt_id_ss4_v2() should really be "enum SS4_PACKET_ID", not "unsigned char". Correct this. Also, most of the Alps SS5 (SS4 v2) packet byte parsing code is implemented using macros, but there are a few places where bytes are directly manipulated in alps.c. For consistency, migrate the rest of these to macros. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-28Input: ALPS - clean up TrackStick handling for SS5 hardwarePaul Donohue
For consistency and clarity, the input_report_*() functions should be called by alps_process_packet_ss4_v2() instead of by alps_decode_ss4_v2(). Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-28Input: ALPS - fix TrackStick support for SS5 hardwarePaul Donohue
The current Alps SS5 (SS4 v2) code generates bogus TouchPad events when TrackStick packets are processed. This causes the xorg synaptics driver to print "unable to find touch point 0" and "BUG: triggered 'if (priv->num_active_touches > priv->num_slots)'" messages. It also causes unexpected TouchPad button release and re-click event sequences if the TrackStick is moved while holding a TouchPad button. This commit corrects the problem by adjusting alps_process_packet_ss4_v2() so that it only sends TrackStick reports when processing TrackStick packets. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: imx6ul_tsc - add support for sample averagingGuy Shapiro
The i.MX6UL internal touchscreen controller contains an option to average upon samples. This feature reduces noise from the produced touch locations. This patch adds sample averaging support to the imx6ul_tsc device driver. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: xpad - fix Xbox One rumble stopping after 2.5 secsCameron Gutman
Unlike previous Xbox pads, the Xbox One pad doesn't have "sticky" rumble packets. The duration is encoded into the command and expiration is handled by the pad firmware. ff-memless needs pseudo-sticky behavior for rumble effects to behave properly for long duration effects. We already specify the maximum rumble on duration in the command packets, but it's still only good for about 2.5 seconds of rumble. This is easily reproducible running fftest's sine vibration test. It turns out there's a repeat count encoded in the rumble command. We can abuse that to get the pseudo-sticky behavior needed for rumble to behave as expected for effects with long duration. By my math, this change should allow a single ff_effect to rumble for 10 minutes straight, which should be more than enough for most needs. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: xpad - add product ID for Xbox One S padCameron Gutman
This is the new gamepad that ships with the Xbox One S which includes Bluetooth functionality. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-25Input: soc_button_array - bail out earlier if gpiod_count is zeroBenjamin Tissoires
The PNP0C40 device of the Surface 3 doesn't have any GPIO attached to it. Instead of trying to access the GPIO, request the count beforehand and bail out if it is null or if an error is returned. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-25Input: soc_button_array - use gpio_is_valid()Benjamin Tissoires
gpio_keys will later use gpio_is_valid(). To match the actual behavior, we should use it here too. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: i8042 - fix typo from i8042_aux_close to i8042_port_closeMarcos Paulo de Souza
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54Guenter Roeck
F54 diagnostics report functions provide data based on the number of enabled rx and tx electrodes, which is not identical to the number of electrodes reported with F54:Query0 and F54:Query1. Those values report the number of supported electrodes, not the number of enabled electrodes. The number of enabled electrodes can be determined by analyzing F55:Ctrl1 (sensor receiver assignment) and F55:Ctrl2 (sensor transmitter assignment). Propagate the number of enabled electrodes from F55 to F54 to avoid corrupted output if not all electrodes are enabled. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - add support for F55 sensor tuningGuenter Roeck
Sensor tuning support is needed to determine the number of enabled tx and rx electrodes for use in F54 functions. The number of enabled electrodes is not identical to the total number of electrodes as reported with F55:Query0 and F55:Query1. It has to be calculated by analyzing F55:Ctrl1 (sensor receiver assignment) and F55:Ctrl2 (sensor transmitter assignment). Support for additional sensor tuning functions may be added later. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - add support for F34 device reflashNick Dyer
Add support for updating firmware, triggered by a sysfs attribute. This patch has been tested on Synaptics S7300. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-17Input: gpio_keys - set input direction explicitlySudeep Holla
Commit 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") switched to use generic device properties for GPIO keys and commit 5feeca3c1e39 ("Input: gpio_keys - add support for GPIO descriptors") switched from legacy GPIO numbers to GPIO descriptors. Previously devm_gpio_request_one was explicitly passed GPIOF_DIR_IN flag to set the GPIO direction as input. However devm_get_gpiod_from_child doesn't have such provisions and hence fwnode_get_named_gpiod can't set it as input. This breaks few platforms with the following error: " gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ unable to lock HW IRQ <n> for IRQ genirq: Failed to request resources for POWER (irq <x>) on irqchip gpio_keys: Unable to claim irq <x>; error -22 gpio-keys: probe failed with error -22 " This patch fixes the issue by setting input direction explicitly for gpio lines described by generic properties. Fixes: 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-16Input: synaptics-rmi4 - unlock on errorDan Carpenter
We should unlock before returning on this error path. Fixes: 3a762dbd5347 ('[media] Input: synaptics-rmi4 - add support for F54 diagnostics') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 08:46:40 +0000