| Age | Commit message (Collapse) | Author |
|---|
|
The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
internal EEE switch bit.
There are existing boards that were not designed to pull the pin low.
Because of that, the EEE status currently depends on the board design.
The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
used to control an LED. Once the bit is unset, the pin will be low. That
will make the active low LED turn on. The pin is controlled by the switch
PHY. It seems that the PHY controls the pin in the way that it inverts the
pin state. That means depending on the wiring of the LED connected to
LAN2LED0 on the board, the LED may be on without an active link.
To not cause this unwanted behaviour whilst enabling EEE on all boards, set
the internal EEE switch bit on the CORE_PLL_GROUP4 register.
My testing on MT7531 shows a certain amount of traffic loss when EEE is
enabled. That said, I haven't come across a board that enables EEE. So
enable EEE on the switch MACs but disable EEE advertisement on the switch
PHYs. This way, we don't change the behaviour of the majority of the boards
that have this switch. The mediatek-ge PHY driver already disables EEE
advertisement on the switch PHYs but my testing shows that it is somehow
enabled afterwards. Disabling EEE advertisement before the PHY driver
initialises keeps it off.
With this change, EEE can now be enabled using ethtool.
Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cifs_get_fattr() may be called with a NULL inode, so check for a
non-NULL inode before calling
cifs_mark_open_handles_for_deleted_file().
This fixes the following oops:
mount.cifs //srv/share /mnt -o ...,vers=3.1.1
cd /mnt
touch foo; tail -f foo &
rm foo
cat foo
BUG: kernel NULL pointer dereference, address: 00000000000005c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 696 Comm: cat Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-1.fc39 04/01/2014
RIP: 0010:__lock_acquire+0x5d/0x1c70
Code: 00 00 44 8b a4 24 a0 00 00 00 45 85 f6 0f 84 bb 06 00 00 8b 2d
48 e2 95 01 45 89 c3 41 89 d2 45 89 c8 85 ed 0 0 <48> 81 3f 40 7a 76
83 44 0f 44 d8 83 fe 01 0f 86 1b 03 00 00 31 d2
RSP: 0018:ffffc90000b37490 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff888110021ec0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000000005c0
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000200
FS: 00007f2a1fa08740(0000) GS:ffff888157a00000(0000)
knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2: 00000000000005c0 CR3: 000000011ac7c000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x180/0x490
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x70/0x230
? asm_exc_page_fault+0x26/0x30
? __lock_acquire+0x5d/0x1c70
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
lock_acquire+0xc0/0x2d0
? cifs_mark_open_handles_for_deleted_file+0x3a/0x100 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
? kmem_cache_alloc+0x2d9/0x370
_raw_spin_lock+0x34/0x80
? cifs_mark_open_handles_for_deleted_file+0x3a/0x100 [cifs]
cifs_mark_open_handles_for_deleted_file+0x3a/0x100 [cifs]
cifs_get_fattr+0x24c/0x940 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
cifs_get_inode_info+0x96/0x120 [cifs]
cifs_lookup+0x16e/0x800 [cifs]
cifs_atomic_open+0xc7/0x5d0 [cifs]
? lookup_open.isra.0+0x3ce/0x5f0
? __pfx_cifs_atomic_open+0x10/0x10 [cifs]
lookup_open.isra.0+0x3ce/0x5f0
path_openat+0x42b/0xc30
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
do_filp_open+0xc4/0x170
do_sys_openat2+0xab/0xe0
__x64_sys_openat+0x57/0xa0
do_syscall_64+0xc1/0x1e0
entry_SYSCALL_64_after_hwframe+0x72/0x7a
Fixes: ffceb7640cbf ("smb: client: do not defer close open handles to deleted files")
Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus ring buffer code could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the struct
vmbus_gpadl for the ring buffers to decide whether to free the memory.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-6-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-6-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus device UIO driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-5-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-5-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The netvsc driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-4-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-3-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
VMBus code could free decrypted pages if set_memory_encrypted()/decrypted()
fails. Leak the pages if this happens.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-2-mhklinux@outlook.com>
|
|
If the network configuration strings are passed as a combination of IPv4
and IPv6 addresses, the current KVP daemon does not handle processing for
the keyfile configuration format.
With these changes, the keyfile config generation logic scans through the
list twice to generate IPv4 and IPv6 sections for the configuration files
to handle this support.
Testcases ran:Rhel 9, Hyper-V VMs
(IPv4 only, IPv6 only, IPv4 and IPv6 combination)
Co-developed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Tested-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com>
|
|
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
Coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() and scnprintf() will be converted as well if these files have
such abused cases.
This patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended.
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: linux-hyperv@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240319034350.1574454-1-lizhijian@fujitsu.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240319034350.1574454-1-lizhijian@fujitsu.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes for mediatec vcodec encoder/decoder oopses
* tag 'media/v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: support 36 bits physical address
media: mediatek: vcodec: adding lock to protect encoder context list
media: mediatek: vcodec: adding lock to protect decoder context list
media: mediatek: vcodec: Fix oops when HEVC init fails
media: mediatek: vcodec: Handle VP9 superframe bitstream with 8 sub-frames
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc-plugins/stackleak: Avoid .head.text section (Ard Biesheuvel)
- ubsan: fix unused variable warning in test module (Arnd Bergmann)
- Improve entropy diffusion in randomize_kstack
* tag 'hardening-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randomize_kstack: Improve entropy diffusion
ubsan: fix unused variable warning in test module
gcc-plugins/stackleak: Avoid .head.text section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Use of the CPU MSR driver is now optional
- Perf is now preferred for many counters
- Non-root users can now execute turbostat, though with limited
functionality
- Add counters for some new GFX hardware
- Minor fixes
* tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (26 commits)
tools/power turbostat: v2024.04.10
tools/power/turbostat: Add support for Xe sysfs knobs
tools/power/turbostat: Add support for new i915 sysfs knobs
tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz
tools/power/turbostat: Fix uncore frequency file string
tools/power/turbostat: Unify graphics sysfs snapshots
tools/power/turbostat: Cache graphics sysfs path
tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICX
tools/power turbostat: Add selftests
tools/power turbostat: read RAPL counters via perf
tools/power turbostat: Add proper re-initialization for perf file descriptors
tools/power turbostat: Clear added counters when in no-msr mode
tools/power turbostat: add early exits for permission checks
tools/power turbostat: detect and disable unavailable BICs at runtime
tools/power turbostat: Add reading aperf and mperf via perf API
tools/power turbostat: Add --no-perf option
tools/power turbostat: Add --no-msr option
tools/power turbostat: enhance -D (debug counter dump) output
tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read
tools/power turbostat: Read base_hz and bclk from CPUID.16H if available
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes:
- intel/hid: Solve spurious hibernation aborts (power button release)
- toshiba_acpi: Ignore 2 keys to avoid log noise during
suspend/resume
- intel-vbtn: Fix probe by restoring VBDL and VGBS evalutation order
- lg-laptop: Fix W=1 %s null argument warning
New HW Support:
- acer-wmi: PH18-71 mode button and fan speed sensor
- intel/hid: Lunar Lake and Arrow Lake HID IDs"
* tag 'platform-drivers-x86-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: fix %s null argument warning
platform/x86: intel-vbtn: Update tablet mode switch at end of probe
platform/x86: intel-vbtn: Use acpi_has_method to check for switch
platform/x86: toshiba_acpi: Silence logging for some events
platform/x86/intel/hid: Add Lunar Lake and Arrow Lake support
platform/x86/intel/hid: Don't wake on 5-button releases
platform/x86: acer-wmi: Add support for Acer PH18-71
|
|
The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.
Unfortunately for negative adjustments, the straightforward use of:
freq = ppm << 16 trips undefined behavior warnings with clang:
valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-499<<16,
~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-450<<16,
~~~~^
..
Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.
Reported-by: Lee Jones <joneslee@google.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com
Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
|
|
BUG() does not return, and arch implementations of BUG() use unreachable()
or other non-returning code. However with !CONFIG_BUG, the default
implementation is often used instead, and that does not do that. x86 always
uses its own implementation, but powerpc with !CONFIG_BUG gives a build
error:
kernel/time/timekeeping.c: In function ‘timekeeping_debug_get_ns’:
kernel/time/timekeeping.c:286:1: error: no return statement in function
returning non-void [-Werror=return-type]
Add unreachable() to default !CONFIG_BUG BUG() implementation.
Fixes: e8e9d21a5df6 ("timekeeping: Refactor timekeeping helpers")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20240410153212.127477-1-adrian.hunter@intel.com
Closes: https://lore.kernel.org/all/CA+G9fYvjdZCW=7ZGxS6A_3bysjQ56YF7S-+PNLQ_8a4DKh1Bhg@mail.gmail.com/
|
|
The bit is set and tested inside mgmt_device_connected(), therefore we
must not set it just outside the function.
Fixes: eeda1bf97bb5 ("Bluetooth: hci_event: Fix not indicating new connection for BIG Sync")
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Check user input length before copying data.
Fixes: 09572fca7223 ("Bluetooth: hci_sock: Add support for BT_{SND,RCV}BUF")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Check user input length before copying data.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Fixes: 0731c5ab4d51 ("Bluetooth: ISO: Add support for BT_PKT_STATUS")
Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Check user input length before copying data.
Fixes: 33575df7be67 ("Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.c")
Fixes: 3ee7b7cd8390 ("Bluetooth: Add BT_MODE socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
syzbot reported rfcomm_sock_setsockopt_old() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old
net/bluetooth/rfcomm/sock.c:632 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70
net/bluetooth/rfcomm/sock.c:673
Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064
Fixes: 9f2c8a03fbb3 ("Bluetooth: Replace RFCOMM link mode with security level")
Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In 'hci_req_sync_complete()', always free the previous sync
request state before assigning reference to a new one.
Reported-by: syzbot+39ec16ff6cc18b1d066d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=39ec16ff6cc18b1d066d
Cc: stable@vger.kernel.org
Fixes: f60cb30579d3 ("Bluetooth: Convert hci_req_sync family of function to new request API")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Coded PHY recommended intervals are 3 time bigger than the 1M PHY so
this aligns with that by multiplying by 3 the values given to 1M PHY
since the code already used recommended values for that.
Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Consider certain values (0x00) as unset and load proper default if
an application has not set them properly.
Fixes: 0fe8c8d07134 ("Bluetooth: Split bt_iso_qos into dedicated structures")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly.
Fixes: 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()")
Cc: stable@kernel.org # v6.6+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-2-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When unloading a module, its state is changing MODULE_STATE_LIVE ->
MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take
a time. `is_module_text_address()` and `__module_text_address()`
works with MODULE_STATE_LIVE and MODULE_STATE_GOING.
If we use `is_module_text_address()` and `__module_text_address()`
separately, there is a chance that the first one is succeeded but the
next one is failed because module->state becomes MODULE_STATE_UNFORMED
between those operations.
In `check_kprobe_address_safe()`, if the second `__module_text_address()`
is failed, that is ignored because it expected a kernel_text address.
But it may have failed simply because module->state has been changed
to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify
non-exist module text address (use-after-free).
To fix this problem, we should not use separated `is_module_text_address()`
and `__module_text_address()`, but use only `__module_text_address()`
once and do `try_module_get(module)` which is only available with
MODULE_STATE_LIVE.
Link: https://lore.kernel.org/all/20240410015802.265220-1-zhengyejian1@huawei.com/
Fixes: 28f6c37a2910 ("kprobes: Forbid probing on trampoline and BPF code areas")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Initialize cpu_mitigations to CPU_MITIGATIONS_OFF if the kernel is built
with CONFIG_SPECULATION_MITIGATIONS=n, as the help text quite clearly
states that disabling SPECULATION_MITIGATIONS is supposed to turn off all
mitigations by default.
│ If you say N, all mitigations will be disabled. You really
│ should know what you are doing to say so.
As is, the kernel still defaults to CPU_MITIGATIONS_AUTO, which results in
some mitigations being enabled in spite of SPECULATION_MITIGATIONS=n.
Fixes: f43b9876e857 ("x86/retbleed: Add fine grained Kconfig knobs")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240409175108.1512861-2-seanjc@google.com
|
|
topo_set_cpuids() updates cpu_present_map and cpu_possible map. It is
invoked during enumeration and "physical hotplug" operations. In the
latter case this results in a kernel crash because cpu_possible_map is
marked read only after init completes.
There is no reason to update cpu_possible_map in that function. During
enumeration cpu_possible_map is not relevant and gets fully initialized
after enumeration completed. On "physical hotplug" the bit is already set
because the kernel allows only CPUs to be plugged which have been
enumerated and associated to a CPU number during early boot.
Remove the bogus update of cpu_possible_map.
Fixes: 0e53e7b656cf ("x86/cpu/topology: Sanitize the APIC admission logic")
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87ttkc6kwx.ffs@tglx
|
|
LoongArch's include/asm/addrspace.h uses SZ_32M and SZ_16K, so add
<linux/sizes.h> to provide those macros to prevent build errors:
In file included from ../arch/loongarch/include/asm/io.h:11,
from ../include/linux/io.h:13,
from ../include/linux/io-64-nonatomic-lo-hi.h:5,
from ../drivers/cxl/pci.c:4:
../include/asm-generic/io.h: In function 'ioport_map':
../arch/loongarch/include/asm/addrspace.h:124:25: error: 'SZ_32M' undeclared (first use in this function); did you mean 'PS_32M'?
124 | #define PCI_IOSIZE SZ_32M
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current dts file for Loongson-2K2000's GMAC/GNET is incomplete, both irq
and phy descriptions are missing. Add them to make GMAC/GNET work.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current dts file for Loongson-2K2000 misses the interrupt-controller &
interrupt-cells descriptions in the msi-controller node, and misses the
msi-parent link in the pci root node. Add them to support PCI-MSI.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some Loongson-2K2000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error. Also adjust
the PCI io resource range to avoid confliction.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some Loongson-2K1000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When enabling both CONFIG_KFENCE and CONFIG_DEBUG_SG, I get the
following backtraces when running LongArch kernels.
[ 2.496257] kernel BUG at include/linux/scatterlist.h:187!
...
[ 2.501925] Call Trace:
[ 2.501950] [<9000000004ad59c4>] sg_init_one+0xac/0xc0
[ 2.502204] [<9000000004a438f8>] do_test_kpp+0x278/0x6e4
[ 2.502353] [<9000000004a43dd4>] alg_test_kpp+0x70/0xf4
[ 2.502494] [<9000000004a41b48>] alg_test+0x128/0x690
[ 2.502631] [<9000000004a3d898>] cryptomgr_test+0x20/0x40
[ 2.502775] [<90000000041b4508>] kthread+0x138/0x158
[ 2.502912] [<9000000004161c48>] ret_from_kernel_thread+0xc/0xa4
The backtrace is always similar but not exactly the same. It is always
triggered from cryptomgr_test, but not always from the same test.
Analysis shows that with CONFIG_KFENCE active, the address returned from
kmalloc() and friends is not always below vm_map_base. It is allocated
by kfence_alloc() which at least sometimes seems to get its memory from
an address space above vm_map_base. This causes __virt_addr_valid() to
return false for the affected objects.
Let __virt_addr_valid() return 1 for kfence pool addresses, this make
virt_addr_valid()/__virt_addr_valid() work with KFENCE.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
KFENCE changes virt_to_page() to be able to translate tlb mapped virtual
addresses, but forget to change virt_to_phys()/phys_to_virt() and other
translation functions as well. This patch fix it, otherwise some drivers
(such as nvme and virtio-blk) cannot work with KFENCE.
All {virt, phys, page, pfn} translation functions are updated:
1, virt_to_pfn()/pfn_to_virt();
2, virt_to_page()/page_to_virt();
3, virt_to_phys()/phys_to_virt().
DMW/TLB mapped addresses are distinguished by comparing the vaddress
with vm_map_base in virt_to_xyz(), and we define WANT_PAGE_VIRTUAL in
the KFENCE case for the reverse translations, xyz_to_virt().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch will override page_to_virt() which use page_address() in the
KFENCE case (by defining WANT_PAGE_VIRTUAL/HASHED_PAGE_VIRTUAL). So move
lowmem_page_address() a little later to avoid such build errors:
error: implicit declaration of function 'page_address'.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Much of turbostat can now run with perf, rather than using the MSR driver
Some of turbostat can now run as a regular non-root user.
Add some new output columns for some new GFX hardware.
[This patch updates the version, but otherwise changes no function;
it touches up some checkpatch issues from previous patches]
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Xe graphics driver uses different graphics sysfs knobs including
/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq
Plus that,
/sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.
Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
/sys/class/drm/card0/power/rc6_residency_ms
/sys/class/drm/card0/gt_cur_freq_mhz
/sys/class/drm/card0/gt_act_freq_mhz
At the same time, it also supports
/sys/class/drm/card0/gt/gt0/rc6_residency_ms
/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
/sys/class/drm/card0/gt/gt1/rc6_residency_ms
/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.
Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.
Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.
Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Binding devm_led_classdev_register() to the netdev is problematic
because on module removal we get a RTNL-related deadlock. Fix this
by avoiding the device-managed LED functions.
Note: We can safely call led_classdev_unregister() for a LED even
if registering it failed, because led_classdev_unregister() detects
this and is a no-op in this case.
Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101")
Cc: stable@vger.kernel.org
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tick_do_timer_cpu is used lockless to check which CPU needs to take care
of the per tick timekeeping duty. This is done to avoid a thundering
herd problem on jiffies_lock.
The read and writes are not annotated so KCSAN complains about data races:
BUG: KCSAN: data-race in tick_nohz_idle_stop_tick / tick_nohz_next_event
write to 0xffffffff8a2bda30 of 4 bytes by task 0 on cpu 26:
tick_nohz_idle_stop_tick+0x3b1/0x4a0
do_idle+0x1e3/0x250
read to 0xffffffff8a2bda30 of 4 bytes by task 0 on cpu 16:
tick_nohz_next_event+0xe7/0x1e0
tick_nohz_get_sleep_length+0xa7/0xe0
menu_select+0x82/0xb90
cpuidle_select+0x44/0x60
do_idle+0x1c2/0x250
value changed: 0x0000001a -> 0xffffffff
Annotate them with READ/WRITE_ONCE() to document the intentional data race.
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/87cyqy7rt3.ffs@tglx
|
|
When the driver notices fw_status == 0xff it tries to perform a PCI
reset on itself via pci_reset_function() in the context of the driver's
health thread. However, pdsc_reset_prepare calls
pdsc_stop_health_thread(), which attempts to stop/flush the health
thread. This results in a deadlock because the stop/flush will never
complete since the driver called pci_reset_function() from the health
thread context. Fix by changing the pdsc_check_pci_health_function()
to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's
work queue.
Unloading the driver in the fw_down/dead state uncovered another issue,
which can be seen in the following trace:
WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440
[...]
RIP: 0010:__queue_work+0x358/0x440
[...]
Call Trace:
<TASK>
? __warn+0x85/0x140
? __queue_work+0x358/0x440
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x358/0x440
queue_work_on+0x28/0x30
pdsc_devcmd_locked+0x96/0xe0 [pds_core]
pdsc_devcmd_reset+0x71/0xb0 [pds_core]
pdsc_teardown+0x51/0xe0 [pds_core]
pdsc_remove+0x106/0x200 [pds_core]
pci_device_remove+0x37/0xc0
device_release_driver_internal+0xae/0x140
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xa0
pdsc_cleanup_module+0x10/0x780 [pds_core]
__x64_sys_delete_module+0x142/0x2b0
? syscall_trace_enter.isra.18+0x126/0x1a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fbd9d03a14b
[...]
Fix this by preventing the devcmd reset if the FW is not running.
Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The definition of spectre_bhi_state() incorrectly returns a const char
* const. This causes the a compiler warning when building with W=1:
warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2812 | static const char * const spectre_bhi_state(void)
Remove the const qualifier from the pointer.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240409230806.1545822-1-daniel.sneddon@linux.intel.com
|
|
Prepare to fix aspects of the new BHI code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
On x86 each struct cpu_hw_events maintains a table for counter assignment but
it missed to update one for the deleted event in x86_pmu_del(). This
can make perf_clear_dirty_counters() reset used counter if it's called
before event scheduling or enabling. Then it would return out of range
data which doesn't make sense.
The following code can reproduce the problem.
$ cat repro.c
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <linux/perf_event.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/syscall.h>
struct perf_event_attr attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
.disabled = 1,
};
void *worker(void *arg)
{
int cpu = (long)arg;
int fd1 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0);
int fd2 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0);
void *p;
do {
ioctl(fd1, PERF_EVENT_IOC_ENABLE, 0);
p = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd1, 0);
ioctl(fd2, PERF_EVENT_IOC_ENABLE, 0);
ioctl(fd2, PERF_EVENT_IOC_DISABLE, 0);
munmap(p, 4096);
ioctl(fd1, PERF_EVENT_IOC_DISABLE, 0);
} while (1);
return NULL;
}
int main(void)
{
int i;
int n = sysconf(_SC_NPROCESSORS_ONLN);
pthread_t *th = calloc(n, sizeof(*th));
for (i = 0; i < n; i++)
pthread_create(&th[i], NULL, worker, (void *)(long)i);
for (i = 0; i < n; i++)
pthread_join(th[i], NULL);
free(th);
return 0;
}
And you can see the out of range data using perf stat like this.
Probably it'd be easier to see on a large machine.
$ gcc -o repro repro.c -pthread
$ ./repro &
$ sudo perf stat -A -I 1000 2>&1 | awk '{ if (length($3) > 15) print }'
1.001028462 CPU6 196,719,295,683,763 cycles # 194290.996 GHz (71.54%)
1.001028462 CPU3 396,077,485,787,730 branch-misses # 15804359784.80% of all branches (71.07%)
1.001028462 CPU17 197,608,350,727,877 branch-misses # 14594186554.56% of all branches (71.22%)
2.020064073 CPU4 198,372,472,612,140 cycles # 194681.113 GHz (70.95%)
2.020064073 CPU6 199,419,277,896,696 cycles # 195720.007 GHz (70.57%)
2.020064073 CPU20 198,147,174,025,639 cycles # 194474.654 GHz (71.03%)
2.020064073 CPU20 198,421,240,580,145 stalled-cycles-frontend # 100.14% frontend cycles idle (70.93%)
3.037443155 CPU4 197,382,689,923,416 cycles # 194043.065 GHz (71.30%)
3.037443155 CPU20 196,324,797,879,414 cycles # 193003.773 GHz (71.69%)
3.037443155 CPU5 197,679,956,608,205 stalled-cycles-backend # 1315606428.66% backend cycles idle (71.19%)
3.037443155 CPU5 198,571,860,474,851 instructions # 13215422.58 insn per cycle
It should move the contents in the cpuc->assign as well.
Fixes: 5471eea5d3bf ("perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240306061003.1894224-1-namhyung@kernel.org
|
|
This patch to differentiate external rev id for gfx 11.5.0.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
