| Age | Commit message (Collapse) | Author |
|---|
|
Add support for EC_PWM_TYPE_DISPLAY_LIGHT and EC_PWM_TYPE_KB_LIGHT pwm
types to the PWM cros_ec_pwm driver. This allows specifying one of these
PWM channel by functionality, and let the EC firmware pick the correct
channel, thus abstracting the hardware implementation from the kernel
driver.
To use it, define the node with the "google,cros-ec-pwm-type"
compatible.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Update google,cros-ec-pwm node documentation to mention the
google,cros-ec-pwm-type compatible as a valid alternative.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add a dt-bindings include file for cros_ec devicetree definition, define
a pair of special purpose PWM channels in it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Some (most?) drivers emit the inactive state when the PWM is disabled.
However there are exceptions, so document that a consumer better doesn't
depend on this behaviour.
Some known exceptions:
- imx27 emits 0 independent of the configured polarity
- mxs just drives the output to the last emitted state.
- iqs620a makes the output tristated on disable, so an external
pull-down would be required.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This pushes a variant of pwm_apply_legacy into the driver that was slightly
simplified because the .set_polarity callback was a noop.
There is no change in behavior.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The MediaTek Helio X10 MT6795 SoC has 7 PWMs: add a compatible string
to use the right match data.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add binding documentation for the MT6795 Helio X10 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Dividing by the result of a division looses precision because the result is
rounded twice. E.g. with clk_rate = 48000000 and period = 32760033 the
following numbers result:
rate = pc->clk_rate >> PWM_DUTY_WIDTH = 187500
hz = DIV_ROUND_CLOSEST_ULL(100ULL * NSEC_PER_SEC, period_ns) = 3052
rate = DIV_ROUND_CLOSEST_ULL(100ULL * rate, hz) = 6144
The exact result would be 6142.5061875 and (apart from rounding) this is
found by using a single division. As a side effect is also a tad
cheaper to calculate.
Also using clk_rate >> PWM_DUTY_WIDTH looses precision. Consider for
example clk_rate = 47999999 and period = 106667:
mul_u64_u64_div_u64(pc->clk_rate >> PWM_DUTY_WIDTH, period_ns,
NSEC_PER_SEC) = 19
mul_u64_u64_div_u64(pc->clk_rate, period_ns,
NSEC_PER_SEC << PWM_DUTY_WIDTH) = 20
(The exact result is 20.000062083332033.)
With this optimizations also switch from round-closest to round-down for
the period calculation. Given that the calculations were non-optimal for
quite some time now with variations in both directions which nobody
reported as a problem, this is the opportunity to align the driver's
behavior to the requirements of new drivers. This has several upsides:
- Implementation is easier as there are no round-nearest variants of
mul_u64_u64_div_u64().
- Requests for too small periods are now consistently refused. This was
kind of arbitrary before, where period_ns < min_period_ns was
refused, but in some cases min_period_ns isn't actually implementable
and then values between min_period_ns and the actual minimum were
rounded up to the actual minimum.
Note that the duty_cycle calculation isn't using the usual round-down
approach yet.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Dividing by the result of a division looses precision. Consider for example
clk_rate = 33000000 and period_ns = 500001. Then
clk_rate / (NSEC_PER_SEC / period_ns)
has the exact value 16500.033, but in C this evaluates to 16508. It gets
worse for even bigger values of period_ns, so with period_ns = 500000001,
the exact result is 16500000.033 while in C we get 33000000.
For that reason use
clk_rate * period_ns / NSEC_PER_SEC
instead which doesn't suffer from this problem. To ensure this doesn't
overflow add a safeguard check for clk_rate.
Note that duty > period can never happen, so the respective check can be
dropped.
Incidentally this fixes a division by zero if period_ns > NSEC_PER_SEC.
Another side effect is that values bigger than INT_MAX for period and
duty_cyle are not wrongly discarded any more.
Fixes: 99b82abb0a35 ("pwm: Add Renesas TPU PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The newly computed register values are intended to exactly match the
previously computed values. The main improvement is that the prescaler
is computed without a loop that involves two divisions in each step.
This uses the fact, that prescalers[i] = 1 << (2 * i).
Assuming a moderately smart compiler, the needed number of divisions for
the case where the requested period is too big, is reduced from 5 to 2.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver used "pwm" for struct tpu_pwm_device pointers. This name is
usually only used for struct pwm_device pointers which this driver calls
"_pwm". So rename to the driver data pointers to "tpd" which then allows
to drop the underscore from "_pwm".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
As pwm->state might not be updated in tpu_pwm_apply() before calling
tpu_pwm_config(), an additional parameter is needed for tpu_pwm_config()
to not change the implemented logic.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This simplifies an error path in .probe() and allows to drop the .remove()
function.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The added benefit is that the error code is mentioned in the error message
and its usage is a bit more compact than open coding it. This also
improves behaviour in case devm_clk_get() returns -EPROBE_DEFER.
While touching this code, consistently start error messages with upper
case.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
The size check for state->period is moved to .apply() to make sure that
the values of state->duty_cycle and state->period are passed to
pwm_samsung_config without change while they are discarded to int.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add interrupts property of pwm for MediaTek MT8192 SoC.
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add dt-binding documentation of pwm for MediaTek MT8186 SoC.
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add dt-binding documentation of pwm for MediaTek MT8195 SoC.
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add dt-binding documentation of pwm for MediaTek MT8192 SoC.
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Convert pwm-mtk-disp.txt to mediatek,pwm-disp.yaml format as suggested
by maintainer.
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This fixes a small issue in clps711x_get_duty() en passant: the
multiplication v * 0xf might have overflown.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The reg member of struct raspberrypi_pwm_prop is a little endian 32 bit
quantity. Explicitly convert the (native endian) value to little endian
on assignment as is already done in raspberrypi_pwm_set_property().
This fixes the following sparse warning:
drivers/pwm/pwm-raspberrypi-poe.c:69:24: warning: incorrect type in initializer (different base types)
drivers/pwm/pwm-raspberrypi-poe.c:69:24: expected restricted __le32 [usertype] reg
drivers/pwm/pwm-raspberrypi-poe.c:69:24: got unsigned int [usertype] reg
Fixes: 79caa362eab6 ("pwm: Add Raspberry Pi Firmware based PWM bus")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The array atmel_tcb_divisors is not supposed to be used outside of the
driver, so make it static.
This fixes a sparse warning:
drivers/pwm/pwm-atmel-tcb.c:64:10: warning: symbol 'atmel_tcb_divisors' was not declared. Should it be static?
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
pwmchip_add() unconditionally assigns the base ID dynamically. Commit
f9a8ee8c8bcd1 ("pwm: Always allocate PWM chip base ID dynamically")
dropped all base assignment from drivers under drivers/pwm/. It missed
this driver. Fix that.
Fixes: f9a8ee8c8bcd1 ("pwm: Always allocate PWM chip base ID dynamically")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The hardware only supports periods <= 1.6 ms and if a bigger period is
requested it is clamped to 1.6 ms. In this case duty_cycle might be bigger
than 1.6 ms and then the duty cycle register is written with a value
bigger than LP3943_MAX_DUTY. So clamp duty_cycle accordingly.
Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add Sunplus SoC SP7021 PWM Driver
Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add bindings doc for Sunplus SoC SP7021 PWM Driver
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add compatible strings list for SAMA7G5.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Convert PWM binding for Atmel/Microchip SoCs to Device Tree Schema
format.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This adds PWM support for Xilinx LogiCORE IP AXI soft timers commonly
found on Xilinx FPGAs. At the moment clock control is very basic: we
just enable the clock during probe and pin the frequency. In the future,
someone could add support for disabling the clock when not in use.
Some common code has been specially demarcated. While currently only
used by the PWM driver, it is anticipated that it may be split off in
the future to be used by the timer driver as well.
This driver was written with reference to Xilinx DS764 for v1.03.a [1].
[1] https://www.xilinx.com/support/documentation/ip_documentation/axi_timer/v1_03_a/axi_timer_ds764.pdf
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This adds a binding for the Xilinx LogiCORE IP AXI Timer. This device is a
"soft" block, so it has some parameters which would not be configurable in
most hardware. This binding is usually automatically generated by Xilinx's
tools, so the names and values of some properties should be kept as they
are, if possible. In addition, this binding is already in the kernel at
arch/microblaze/boot/dts/system.dts, and in user software such as QEMU.
The existing driver uses the clock-frequency property, or alternatively the
/cpus/timebase-frequency property as its frequency input. Because these
properties are deprecated, they have not been included with this schema.
All new bindings should use the clocks/clock-names properties to specify
the parent clock.
Because we need to init timer devices so early in boot, we determine if we
should use the PWM driver or the clocksource/clockevent driver by the
presence/absence, respectively, of #pwm-cells. Because both counters are
used by the PWM, there is no need for a separate property specifying which
counters are to be used for the PWM.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Per-channel data is tracked using struct pwm_device::chip_data and
struct atmel_tcb_pwm_chip::pwms[]. Simplify by using the latter
consistently.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This fixes a problem that was supposed to be addressed by commit
6eefb79d6f5bc ("pwm: sun4i: Remove erroneous else branch") - backlight
could not be switched off on some Allwinner A20. The commit was
correct, but was not a reliable fix for the problem, which was timing
related.
The real problem for the backlight switching problem was that sleeping
for a full period did not work, because delay_us is always zero.
It is zero because the period (plus 1 microsecond) is rounded down to
the next "jiffies", but the period is less than one jiffy.
On my Cubieboard 2, the period is 5ms, and 1 jiffy (at the default
HZ=100) is 10ms, so nsecs_to_jiffies(10ms+1us)=0.
The roundtrip from nanoseconds to jiffies and back to microseconds is
an unnecessary loss of precision; always rounding down (via
nsecs_to_jiffies()) then causes the breakage.
This patch eliminates this roundtrip, and directly converts from
nanoseconds to microseconds (for usleep_range()), using
DIV_ROUND_UP_ULL() to force rounding up. This way, the sleep time is
never zero, and after the sleep, we are guaranteed to be in a
different period, and the device is ready for another control command
for sure.
Signed-off-by: Max Kellermann <max.kellermann@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Basically this code did "jiffies + period - jiffies", and we can
simply eliminate the "jiffies" time stamp here.
Signed-off-by: Max Kellermann <max.kellermann@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Its value is calculated in sun4i_pwm_apply() and is used only there.
Signed-off-by: Max Kellermann <max.kellermann@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixlet from Juergen Gross:
"A single cleanup patch for the Xen balloon driver"
* tag 'for-linus-5.18-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: don't use PV mode extra memory for zone device allocations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two x86 fixes related to TSX:
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX
to cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update
which provides TSX development mode does not suddenly make the
system vulnerable to TSX Asynchronous Abort"
* tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Disable TSX development mode at boot
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for the timers core:
- Fix the warning condition in __run_timers() which does not take
into account that a CPU base (especially the deferrable base) never
has a timer armed on it and therefore the next_expiry value can
become stale.
- Replace a WARN_ON() in the NOHZ code with a WARN_ON_ONCE() to
prevent endless spam in dmesg.
- Remove the double star from a comment which is not meant to be in
kernel-doc format"
* tag 'timers-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Fix non-kernel-doc comment
tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
timers: Fix warning condition in __run_timers()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP core:
- Make the warning condition in flush_smp_call_function_queue()
correct, which checked a just emptied list head for being empty
instead of validating that there was no pending entry on the
offlined CPU at all.
- The @cpu member of struct cpuhp_cpu_state is initialized when the
CPU hotplug thread for the upcoming CPU is created. That's too late
because the creation of the thread can fail and then the following
rollback operates on CPU0. Get rid of the CPU member and hand the
CPU number to the involved functions directly"
* tag 'smp-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
smp: Fix offline cpu check in flush_smp_call_function_queue()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the interrupt affinity spreading logic to take into
account that there can be an imbalance between present and possible
CPUs, which causes already assigned bits to be overwritten"
* tag 'irq-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Consider that CPUs on nodes can be unbalanced
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Fix a regression with battery data failing to load from DT
* tag 'for-v5.18-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: Reset err after not finding static battery
power: supply: samsung-sdi-battery: Add missing charge restart voltages
|
