| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes, some build fixes, a comment fix and a trivial cleanup"
* tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONG
LoongArch: Replace hard-coded values in comments with VALEN
LoongArch: Clean up plat_swiotlb_setup() related code
LoongArch: Check unwind_error() in arch_stack_walk()
LoongArch: Adjust user_regset_copyin parameter to the correct offset
LoongArch: Adjust user_watch_state for explicit alignment
LoongArch: module: set section addresses to 0x0
LoongArch: Mark 3 symbol exports as non-GPL
LoongArch: Enable PG when wakeup from suspend
LoongArch: Fix _CONST64_(x) as unsigned
LoongArch: Fix build error if CONFIG_SUSPEND is not set
LoongArch: Fix probing of the CRC32 feature
LoongArch: Make WriteCombine configurable for ioremap()
|
|
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch,
it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep
consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and
tools/arch/loongarch/include/uapi/asm/bitsperlong.h.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are
concerned with the VA's MSB which is VALEN-1 instead of always being 47.
Fix comments to avoid misleading others.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and
remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted,
so clean up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following messages with CONFIG_PROVE_LOCKING=y on
LoongArch:
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
This is because stack_trace_save() returns a big value after call
arch_stack_walk(), here is the call trace:
save_trace()
stack_trace_save()
arch_stack_walk()
stack_trace_consume_entry()
arch_stack_walk() should return immediately if unwind_next_frame()
failed, no need to do the useless loops to increase the value of c->len
in stack_trace_consume_entry(), then we can fix the above problem.
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Ensure that user_watch_state can be set correctly by the user.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is done in order to easily calculate the number of breakpoints in
hw_break_get()/hw_break_set().
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci_am654: Fix support for UHS-I SDR12 and SDR25 speed modes
MEMSTICK:
- Fix memory leak if card device never gets registered"
* tag 'mmc-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
memstick: fix memory leak if card device is never registered
mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of updates for devicetree files for Qualcomm,
Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
contents:
- Wrong GPIO polarity on some boards
- Lower SD card interface speed for better stability
- Incorrect power supply, clock, pmic, cache properties
- Disable broken hbr3 on sc7280-herobrine
- Devicetree warning fixes
The only other changes are:
- A regression fix for the Amlogic performance monitoring unit
driver, along with two related DT changes.
- imx_v6_v7_defconfig enables PCI support again.
- Trivial fixes for tee, optee and psci firmware drivers, addressing
compiler warning and error output"
* tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
firmware/psci: demote suspend-mode warning to info level
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
tee: Pass a pointer to virt_to_page()
perf/amlogic: adjust register offsets
arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
arm64: dts: meson-g12-common: specify full DMC range
arm64: dts: imx8mp: fix address length for LCDIF2
riscv: dts: canaan: drop invalid spi-max-frequency
...
|
|
These got*, plt* and .text.ftrace_trampoline sections specified for
LoongArch have non-zero addressses. Non-zero section addresses in a
relocatable ELF would confuse GDB when it tries to compute the section
offsets and it ends up printing wrong symbol addresses. Therefore, set
them to zero, which mirrors the change in commit 5d8591bc0fbaeb6ded
("arm64 module: set plt* section addresses to 0x0").
Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
vm_map_base, empty_zero_page and invalid_pmd_table could be accessed
widely by some out-of-tree non-GPL but important file systems or drivers
(e.g. OpenZFS). Let's use EXPORT_SYMBOL() instead of EXPORT_SYMBOL_GPL()
to export them, so as to avoid build errors.
1, Details about vm_map_base:
This is a LoongArch-specific symbol and may be referenced through macros
PCI_IOBASE, VMALLOC_START and VMALLOC_END.
2, Details about empty_zero_page:
As it stands today, only 3 architectures export empty_zero_page as a GPL
symbol: IA64, LoongArch and MIPS. LoongArch gets the GPL export by
inheriting from MIPS, and the MIPS export was first introduced in commit
497d2adcbf50b ("[MIPS] Export empty_zero_page for sake of the ext4
module."). The IA64 export was similar: commit a7d57ecf4216e ("[IA64]
Export three symbols for module use") did so for kvm.
In both IA64 and MIPS, the export of empty_zero_page was done for
satisfying some in-kernel component built as module (kvm and ext4
respectively), and given its reasonably low-level nature, GPL is a
reasonable choice. But looking at the bigger picture it is evident most
other architectures do not regard it as GPL, so in effect the symbol
probably should not be treated as such, in favor of consistency.
3, Details about invalid_pmd_table:
Keep consistency with invalid_pte_table and make it be possible by some
modules.
Cc: stable@vger.kernel.org
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some firmwares don't enable PG when wakeup from suspend, so do it in
kernel. This can improve code compatibility for boot kernel.
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Addresses should all be of unsigned type to avoid unnecessary conversions.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following build error on LoongArch if CONFIG_SUSPEND is
not set:
ld: drivers/acpi/sleep.o: in function 'acpi_pm_prepare':
sleep.c:(.text+0x2b8): undefined reference to 'loongarch_wakeup_start'
Here is the call trace:
acpi_pm_prepare()
__acpi_pm_prepare()
acpi_sleep_prepare()
acpi_get_wakeup_address()
loongarch_wakeup_start()
Root cause: loongarch_wakeup_start() is defined in arch/loongarch/power/
suspend_asm.S which is only built under CONFIG_SUSPEND. In order to fix
the build error, just let acpi_get_wakeup_address() return 0 if CONFIG_
SUSPEND is not set.
Fixes: 366bb35a8e48 ("LoongArch: Add suspend (ACPI S3) support")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/11215033-fa3c-ecb1-2fc0-e9aeba47be9b@infradead.org/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Not all LoongArch processors support CRC32 instructions. This feature
is indicated by CPUCFG1.CRC32 (Bit25) but it is wrongly defined in the
previous versions of the ISA manual (and so does in loongarch.h). The
CRC32 feature is set unconditionally now, so fix it.
BTW, expose the CRC32 feature in /proc/cpuinfo.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).
This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.
Kernel parameter writecombine=on/off can be used to override the Kconfig
option.
Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Do not pull tasks to the local scheduling group if its average load
is higher than the average system load
* tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix imbalance overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Drop __init annotation from two rtc functions which get called after
boot is done, in order to prevent a crash
* tag 'x86_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Remove __init for runtime functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- A fix for NUMA distance handling in the pseries SCM (pmem) driver.
Thanks to Aneesh Kumar K.V.
* tag 'powerpc-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Update the NUMA distance table for the target node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Drop debug info from purgatory objects again
- Document that kernel.org provides prebuilt LLVM toolchains
- Give up handling untracked files for source package builds
- Avoid creating corrupted cpio when KBUILD_BUILD_TIMESTAMP is given
with a pre-epoch data.
- Change panic_show_mem() to a macro to handle variable-length argument
- Compress tarballs on-the-fly again
* tag 'kbuild-fixes-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: do not create intermediate *.tar for tar packages
kbuild: do not create intermediate *.tar for source tarballs
kbuild: merge cmd_archive_linux and cmd_archive_perf
init/initramfs: Fix argument forwarding to panic() in panic_show_mem()
initramfs: Check negative timestamp to prevent broken cpio archive
kbuild: give up untracked files for source package builds
Documentation/llvm: Add a note about prebuilt kernel.org toolchains
purgatory: fix disabling debug info
|
|
Pull ksmbd server fix from Steve French:
"smb311 server preauth integrity negotiate context parsing fix (check
for out of bounds access)"
* tag '6.3-rc6-ksmbd-server-fix' of git://git.samba.org/ksmbd:
ksmbd: avoid out of bounds access in decode_preauth_ctxt()
|
|
Commit 05e96e96a315 ("kbuild: use git-archive for source package
creation") split the compression as a separate step to factor out
the common build rules.
With the previous commit, we got back to the situation where source
tarballs are compressed on-the-fly.
There is no reason to keep the separate compression rules.
Generate the comressed tar packages directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Since commit 05e96e96a315 ("kbuild: use git-archive for source package
creation"), a source tarball is created in two steps; create *.tar file
then compress it. I split the compression as a separate rule because I
just thought 'git archive' supported only gzip.
For other compression algorithms, I could pipe the two commands:
$ git archive HEAD | xz > linux.tar.xz
I read git-archive(1) carefully, and I realized GIT had provided a
more elegant way:
$ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD
This commit uses 'tar.tar.*.command' configuration to specify the
compression backend so we can compress a source tarball on-the-fly.
GIT commit 767cf4579f0e ("archive: implement configurable tar filters")
is more than a decade old, so it should be available on almost all build
environments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
The two commands, cmd_archive_linux and cmd_archive_perf, are similar.
Merge them to make it easier to add more changes to the git-archive
command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Forwarding variadic argument lists can't be done by passing a va_list
to a function with signature foo(...) (as panic() has). It ends up
interpreting the va_list itself as a single argument instead of
iterating it. printf() happily accepts it of course, leading to corrupt
output.
Convert panic_show_mem() to a macro to allow forwarding the arguments.
The function is trivial enough that it's easier than trying to introduce
a vpanic() variant.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Similar to commit 4c9d410f32b3 ("initramfs: Check timestamp to prevent
broken cpio archive"), except asserts that the timestamp is
non-negative. This can happen when the KBUILD_BUILD_TIMESTAMP is a value
before UNIX epoch, which may be set when making reproducible builds that
don't want to look like they use a valid date.
While support for dates before 1970 might not be supported, this is more
about preventing undetected CPIO corruption. The printf's use a minimum
length format specifier, and will happily make the field longer than 8
characters if they need to.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small client fix for better checking for smb311 negotiate context
overflows, also marked for stable"
* tag '6.3-rc6-smb311-client-negcontext-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix negotiate context parsing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI fixes from Richard Weinberger:
- Fix failure to attach when vid_hdr offset equals the (sub)page size
- Fix for a deadlock in UBI's worker thread
* tag 'ubifs-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size
ubi: Fix deadlock caused by recursively holding work_sem
|
|
smb311_decode_neg_context() doesn't properly check against SMB packet
boundaries prior to accessing individual negotiate context entries. This
is due to the length check omitting the eight byte smb2_neg_context
header, as well as incorrect decrementing of len_of_ctxts.
Fixes: 5100d8a3fe03 ("SMB311: Improve checking of negotiate security contexts")
Reported-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Just two driver fixes"
* tag 'i2c-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ocores: generate stop condition after timeout in polling mode
i2c: mchp-pci1xxxx: Update Timing registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One small fix to SCSI Enclosure Services to fix a regression caused by
another recent fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ses: Handle enclosure with just a primary component gracefully
|
|
Pull block fix from Jens Axboe:
"A single NVMe quirk entry addition"
* tag 'block-6.3-2023-04-14' of git://git.kernel.dk/linux:
nvme-pci: add NVME_QUIRK_BOGUS_NID for T-FORCE Z330 SSD
|
|
Pull io_uring fix from Jens Axboe:
"Just a small tweak to when task_work needs redirection, marked for
stable as well"
* tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linux:
io_uring: complete request via task work in case of DEFER_TASKRUN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a missing fence when generating the NOMMU sigreturn
trampoline
- A set of fixes for early DTB handling of reserved memory nodes
* tag 'riscv-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: No need to relocate the dtb as it lies in the fixmap region
riscv: Do not set initial_boot_params to the linear address of the dtb
riscv: Move early dtb mapping into the fixmap region
riscv: add icache flush for nommu sigreturn trampoline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add two ACPI-related quirks:
- Add a quirk to force StorageD3Enable on AMD Picasso systems (Mario
Limonciello)
- Add an ACPI IRQ override quirk for ASUS ExpertBook B1502CBA (Paul
Menzel)"
* tag 'acpi-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CBA
ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make the amd-pstate cpufreq driver take all of the possible
combinations of the 'old' and 'new' status values correctly while
changing the operation mode via sysfs (Wyes Karny)"
* tag 'pm-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
amd-pstate: Fix amd_pstate mode switch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Modify the Intel thermal throttling code to avoid updating unsupported
status clearing mask bits which causes the kernel to complain about
unchecked MSR access (Srinivas Pandruvada)"
* tag 'thermal-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: Avoid updating unsupported THERM_STATUS_CLEAR mask bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes.
At this time, quite a few fixes for the old PCI drivers are found.
Although they are not regression fixes, I took these as they are
materials for stable kernels.
In addition, a couple of regression fixes and another couple of
HD-audio quirks are included"
* tag 'sound-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: disable KAE for Intel DG2
ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2
ALSA: hda: patch_realtek: add quirk for Asus N7601ZM
ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex()
ALSA: emu10k1: don't create old pass-through playback device on Audigy
ALSA: emu10k1: fix capture interrupt handler unlinking
ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards
ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard
ALSA: i2c/cs8427: fix iec958 mixer control deactivation
|
|
Pull rdma fixes from Jason Gunthorpe:
"We had a fairly slow cycle on the rc side this time, here are the
accumulated fixes, mostly in drivers:
- irdma should not generate extra completions during flushing
- Fix several memory leaks
- Do not get confused in irdma's iwarp mode if IPv6 is present
- Correct a link speed calculation in mlx5
- Increase the EQ/WQ limits on erdma as they are too small for big
applications
- Use the right math for erdma's inline mtt feature
- Make erdma probing more robust to boot time ordering differences
- Fix a KMSAN crash in CMA due to uninitialized qkey"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Fix GID entry ref leak when create_ah fails
RDMA/cma: Allow UD qp_type to join multicast only
RDMA/erdma: Defer probing if netdevice can not be found
RDMA/erdma: Inline mtt entries into WQE if supported
RDMA/erdma: Update default EQ depth to 4096 and max_send_wr to 8192
RDMA/erdma: Fix some typos
IB/mlx5: Add support for 400G_8X lane speed
RDMA/irdma: Add ipv4 check to irdma_find_listener()
RDMA/irdma: Increase iWARP CM default rexmit count
RDMA/irdma: Fix memory leak of PBLE objects
RDMA/irdma: Do not generate SW completions for NOPs
|
|
Merge a quirk to force StorageD3Enable on AMD Picasso systems (Mario
Limonciello).
* acpi-x86:
ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
|
|
So far io_req_complete_post() only covers DEFER_TASKRUN by completing
request via task work when the request is completed from IOWQ.
However, uring command could be completed from any context, and if io
uring is setup with DEFER_TASKRUN, the command is required to be
completed from current context, otherwise wait on IORING_ENTER_GETEVENTS
can't be wakeup, and may hang forever.
The issue can be observed on removing ublk device, but turns out it is
one generic issue for uring command & DEFER_TASKRUN, so solve it in
io_uring core code.
Fixes: e6aeb2721d3b ("io_uring: complete all requests in task context")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/b3fc9991-4c53-9218-a8cc-5b4dd3952108@kernel.dk/
Reported-by: Jens Axboe <axboe@kernel.dk>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fix from Christoph.
* 'nvme-6.3' of git://git.infradead.org/nvme:
nvme-pci: add NVME_QUIRK_BOGUS_NID for T-FORCE Z330 SSD
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
A few more Qualcomm ARM64 DeviceTree fixes for 6.3
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
* tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On some Qualcomm platforms, like SC8280XP, the attempt to set PC mode
during boot fails with PSCI_RET_DENIED and since commit 998fcd001feb
("firmware/psci: Print a warning if PSCI doesn't accept PC mode") this
is now logged at warning level:
psci: failed to set PC mode: -3
As there is nothing users can do about the firmware behaving this way,
demote the warning to info level and clearly mark it as a firmware bug:
psci: [Firmware Bug]: failed to set PC mode: -3
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use of keep-alive (KAE) has resulted in loss of audio on some A750/770
cards as the transition from keep-alive to stream playback is not
working as expected. As there is limited benefit of the new KAE mode
on discrete cards, revert back to older silent-stream implementation
on these systems.
Cc: stable@vger.kernel.org
Fixes: 15175a4f2bbb ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8307
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230413191153.3692049-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Added a quirk to fix the TeamGroup T-Force Cardea Zero Z330 SSDs reporting
duplicate NGUIDs.
Signed-off-by: Duy Truong <dory@dory.moe>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We used to access the dtb via its linear mapping address but now that the
dtb early mapping was moved in the fixmap region, we can keep using this
address since it is present in swapper_pg_dir, and remove the dtb
relocation.
Note that the relocation was wrong anyway since early_memremap() is
restricted to 256K whereas the maximum fdt size is 2MB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-4-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
early_init_dt_verify() is already called in parse_dtb() and since the dtb
address does not change anymore (it is now in the fixmap region), no need
to reset initial_boot_params by calling early_init_dt_verify() again.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329081932.79831-3-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
