| Age | Commit message (Collapse) | Author |
|---|
|
The ice_sq_done function is used to check the control queue head register
and determine whether or not the control queue processing is done. This
function is called in a loop checking against jiffies for a specified
timeout.
The pattern of reading a register in a loop until a condition is true or a
timeout is reached is a relatively common pattern. In fact, the kernel
provides a read_poll_timeout function implementing this behavior in
<linux/iopoll.h>
Use of read_poll_timeout is preferred over directly coding these loops.
However, using it in the ice driver is a bit more difficult because of the
rd32 wrapper. Implement a rd32_poll_timeout wrapper based on
read_poll_timeout.
Refactor ice_sq_done to use rd32_poll_timeout, replacing the loop calling
ice_sq_done in ice_sq_send_cmd. This simplifies the logic down to a single
ice_sq_done() call.
The implementation of rd32_poll_timeout uses microseconds for its timeout
value, so update the CQ timeout macros used to be specified in microseconds
units as well instead of using HZ for jiffies.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 5fbf57a937f4 ("net: netlink: remove the cb_mutex "injection" from
netlink core") has removed the usage of the 'dump_cb_mutex' field from the
struct netlink_sock.
Remove the field itself now. It saves a few bytes in the structure.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When net devices propagate xdp configurations to slave devices,
we will need to perform a memory provider check to ensure we're
not binding xdp to a device using unreadable netmem.
Currently the ->ndo_bpf calls in a few places. Adding checks to all
these places would not be ideal.
Refactor all the ->ndo_bpf calls into one place where we can add this
check in the future.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Li Zetao says:
====================
net: Delete some redundant judgments
This patchset aims to remove some unnecessary judgments and make the
code more concise. In some network modules, rtnl_set_sk_err is used to
record error information, but the err is repeatedly judged to be less
than 0 on the error path. Deleted these redundant judgments.
No functional change intended.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOMEM, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Maxime Chevallier says:
====================
Introduce PHY listing and link_topology tracking
This is V18 of the phy_link_topology series, aiming at improving support
for multiple PHYs being attached to the same MAC.
V18 is a simple rebase of the V17 on top of net-next, gathering the
tested-by and reviewed-by tags from Christophe (thanks !).
This iteration is also one patch shorter than V17 (patch 12/14 in V17 is gone),
as one of the patches used to fix an issue that has now been resolved by
Simon Horman in
743ff02152bc ethtool: Don't check for NULL info in prepare_data callbacks
As a remainder, here's what the PHY listings would look like :
- eth0 has a 88x3310 acting as media converter, and an SFP module with
an embedded 88e1111 PHY
- eth2 has a 88e1510 PHY
PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
Upstream type: MAC
PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0
PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
Upstream type: MAC
Ethtool patches : https://github.com/minimaxwell/ethtool/tree/mc/topo-v16
(this branch is compatible with this V18 series)
Link to V17: https://lore.kernel.org/netdev/20240709063039.2909536-1-maxime.chevallier@bootlin.com/
Link to V16: https://lore.kernel.org/netdev/20240705132706.13588-1-maxime.chevallier@bootlin.com/
Link to V15: https://lore.kernel.org/netdev/20240703140806.271938-1-maxime.chevallier@bootlin.com/
Link to V14: https://lore.kernel.org/netdev/20240701131801.1227740-1-maxime.chevallier@bootlin.com/
Link to V13: https://lore.kernel.org/netdev/20240607071836.911403-1-maxime.chevallier@bootlin.com/
Link to v12: https://lore.kernel.org/netdev/20240605124920.720690-1-maxime.chevallier@bootlin.com/
Link to v11: https://lore.kernel.org/netdev/20240404093004.2552221-1-maxime.chevallier@bootlin.com/
Link to V10: https://lore.kernel.org/netdev/20240304151011.1610175-1-maxime.chevallier@bootlin.com/
Link to V9: https://lore.kernel.org/netdev/20240228114728.51861-1-maxime.chevallier@bootlin.com/
Link to V8: https://lore.kernel.org/netdev/20240220184217.3689988-1-maxime.chevallier@bootlin.com/
Link to V7: https://lore.kernel.org/netdev/20240213150431.1796171-1-maxime.chevallier@bootlin.com/
Link to V6: https://lore.kernel.org/netdev/20240126183851.2081418-1-maxime.chevallier@bootlin.com/
Link to V5: https://lore.kernel.org/netdev/20231221180047.1924733-1-maxime.chevallier@bootlin.com/
Link to V4: https://lore.kernel.org/netdev/20231215171237.1152563-1-maxime.chevallier@bootlin.com/
Link to V3: https://lore.kernel.org/netdev/20231201163704.1306431-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20231117162323.626979-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20230907092407.647139-1-maxime.chevallier@bootlin.com/
More discussions on specific issues that happened in 6.9-rc:
https://lore.kernel.org/netdev/20240412104615.3779632-1-maxime.chevallier@bootlin.com/
https://lore.kernel.org/netdev/20240429131008.439231-1-maxime.chevallier@bootlin.com/
https://lore.kernel.org/netdev/20240507102822.2023826-1-maxime.chevallier@bootlin.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The newly introduced phy_link_topology tracks all ethernet PHYs that are
attached to a netdevice. Document the base principle, internal and
external APIs. As the phy_link_topology is expected to be extended, this
documentation will hold any further improvements and additions made
relative to topology handling.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer
from the ethnl request to allow query phy stats from each PHY on the
link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
As we don't get the PHY directly from the netdev's attached phydev, also
adjust the error messages.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PHY_GET command, supporting both DUMP and GET operations, is used to
retrieve the list of PHYs connected to a netdevice, and get topology
information to know where exactly it sits on the physical link.
Add the netlink specs corresponding to that command.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the spec to take the newly introduced phy-index as a generic
request parameter.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the passed phy_index.
Add a helper that netlink command handlers need to use to grab the
targeted PHY from the req_info. This helper needs to hold rtnl_lock()
while interacting with the PHY, as it may be removed at any point.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
This call will always be made while holding the RTNL which ensures
that the SFP driver won't unbind from the device. The returned pointer
to the bus name will only be used while RTNL is held.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
Unmask upper DSCP bits - part 1
tl;dr - This patchset starts to unmask the upper DSCP bits in the IPv4
flow key in preparation for allowing IPv4 FIB rules to match on DSCP.
No functional changes are expected.
The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.
It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.
In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset starts to unmask the upper DSCP bits in the various places
that invoke the core FIB lookup functions directly (patches #1-#7) and
in the input route path (patches #8-#12). Future patchsets will do the
same in the output route path.
No functional changes are expected as commit 1fa3314c14c6 ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
====================
Link: https://patch.msgid.link/20240821125251.1571445-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits when performing source validation and routing
a packet using the same route from a previously processed packet (hint).
In the future, this will allow us to perform the FIB lookup that is
performed as part of source validation according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-13-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits when performing source validation for
multicast packets during early demux. In the future, this will allow us
to perform the FIB lookup which is performed as part of source
validation according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Align the ICMP code to other callers of ip_route_input() and pass the
full DS field. In the future this will allow us to perform a route
lookup according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-11-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits when looking up an input route via the
RTM_GETROUTE netlink message so that in the future the lookup could be
performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-10-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits in input route lookup so that in the future
the lookup could be performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 35ebf65e851c ("ipv4: Create and use
fib_compute_spec_dst() helper."), the function is used - for example -
to determine the source address for an ICMP reply. If we are responding
to a multicast or broadcast packet, the source address is set to the
source address that we would use if we were to send a packet to the
unicast source of the original packet. This address is determined by
performing a FIB lookup and using the preferred source address of the
resulting route.
Unmask the upper DSCP bits of the DS field of the packet that triggered
the reply so that in the future the FIB lookup could be performed
according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits when calling ipmr_fib_lookup() so that in the
future it could perform the FIB lookup according to the full DSCP value.
Note that ipmr_fib_lookup() performs a FIB rule lookup (returning the
relevant routing table) and that IPv4 multicast FIB rules do not support
matching on TOS / DSCP. However, it is still worth unmasking the upper
DSCP bits in case support for DSCP matching is ever added.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a similar fashion to the iptables rpfilter match, unmask the upper
DSCP bits of the DS field of the currently tested packet so that in the
future the FIB lookup could be performed according to the full DSCP
value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rpfilter match performs a reverse path filter test on a packet by
performing a FIB lookup with the source and destination addresses
swapped.
Unmask the upper DSCP bits of the DS field of the tested packet so that
in the future the FIB lookup could be performed according to the full
DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Record Route IP option records the addresses of the routers that
routed the packet. In the case of forwarded packets, the kernel performs
a route lookup via fib_lookup() and fills in the preferred source
address of the matched route.
Unmask the upper DSCP bits when performing the lookup so that in the
future the lookup could be performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB
lookup according to user provided parameters and communicate the result
back to user space.
Unmask the upper DSCP bits of the user-provided DS field before invoking
the IPv4 FIB lookup API so that in the future the lookup could be
performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The helper performs a FIB lookup according to the parameters in the
'params' argument, one of which is 'tos'. According to the test in
test_tc_neigh_fib.c, it seems that BPF programs are expected to
initialize the 'tos' field to the full 8 bit DS field from the IPv4
header.
Unmask the upper DSCP bits before invoking the IPv4 FIB lookup APIs so
that in the future the lookup could be performed according to the full
DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Abhinav Jain says:
====================
Enhance network interface feature testing
This small series includes fixes for creation of veth pairs for
networkless kernels & adds tests for turning the different network
interface features on and off in selftests/net/netdevice.sh script.
Tested using vng and compiles for network as well as networkless kernel.
# selftests: net: netdevice.sh
# No valid network device found, creating veth pair
# PASS: veth0: set interface up
# PASS: veth0: set MAC address
# XFAIL: veth0: set IP address unsupported for veth*
# PASS: veth0: ethtool list features
# PASS: veth0: Turned off feature: rx-checksumming
# PASS: veth0: Turned on feature: rx-checksumming
# PASS: veth0: Restore feature rx-checksumming to initial state on
# Actual changes:
# tx-checksum-ip-generic: off
...
# PASS: veth0: Turned on feature: rx-udp-gro-forwarding
# PASS: veth0: Restore feature rx-udp-gro-forwarding to initial state off
# Cannot get register dump: Operation not supported
# XFAIL: veth0: ethtool dump not supported
# PASS: veth0: ethtool stats
# PASS: veth0: stop interface
====================
Link: https://patch.msgid.link/20240821171903.118324-1-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check if veth pair was created and if yes, xfail on setting IP address
logging an informational message.
Use XFAIL instead of SKIP for unsupported ethtool APIs.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-4-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement on/off testing for all non-fixed features via while loop.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-3-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check if the netdev list is empty and create veth pair to be used for
feature on/off testing.
Remove the veth pair after testing is complete.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-2-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds with GCC 14.2.0 warn that:
.../aq_ethtool.c:278:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=]
278 | snprintf(tc_string, 8, "TC%d ", tc);
| ^~
.../aq_ethtool.c:278:56: note: directive argument in the range [-2147483641, 254]
278 | snprintf(tc_string, 8, "TC%d ", tc);
| ^~~~~~~
.../aq_ethtool.c:278:33: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
278 | snprintf(tc_string, 8, "TC%d ", tc);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tc is always in the range 0 - cfg->tcs. And as cfg->tcs is a u8,
the range is 0 - 255. Further, on inspecting the code, it seems
that cfg->tcs will never be more than AQ_CFG_TCS_MAX (8), so
the range is actually 0 - 8.
So, it seems that the condition that GCC flags will not occur.
But, nonetheless, it would be nice if it didn't emit the warning.
It seems that this can be achieved by changing the format specifier
from %d to %u, in which case I believe GCC recognises an upper bound
on the range of tc of 0 - 255. After some experimentation I think
this is due to the combination of the use of %u and the type of
cfg->tcs (u8).
Empirically, updating the type of the tc variable to unsigned int
has the same effect.
As both of these changes seem to make sense in relation to what the code
is actually doing - iterating over unsigned values - do both.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821-atlantic-str-v1-1-fa2cfe38ca00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Eliminate the fdtoverlay command duplication in scripts/Makefile.lib
- Fix 'make compile_commands.json' for external modules
- Ensure scripts/kconfig/merge_config.sh handles missing newlines
- Fix some build errors on macOS
* tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "prequisites" to "prerequisites"
Documentation/llvm: turn make command for ccache into code block
kbuild: avoid scripts/kallsyms parsing /dev/null
treewide: remove unnecessary <linux/version.h> inclusion
scripts: kconfig: merge_config: config files: add a trailing newline
Makefile: add $(srctree) to dependency of compile_commands.json target
kbuild: clean up code duplication in cmd_fdtoverlay
|
|
iucv_alloc_device() gets a format string and a varying number of
arguments. This is incorrectly forwarded by calling dev_set_name() with
the format string and a va_list, while dev_set_name() expects also a
varying number of arguments.
Symptoms:
Corrupted iucv device names, which can result in log messages like:
sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952'
Fixes: 4452e8ef8c36 ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
