| Age | Commit message (Collapse) | Author |
|---|
|
In this situation (VLAN filtering disabled on br0):
br0.10
/
br0
/ \
swp0 swp1
When a frame is transmitted from the VLAN upper, the bridge will send
it down to one of the switch ports with forward offloading
enabled. This will cause tag_dsa to generate a FORWARD tag. Before
this change, that tag would have it's VID set to 10, even though VID
10 is not loaded in the VTU.
Before the blamed commit, the frame would trigger a VTU miss and be
forwarded according to the PVT configuration. Now that all fabric
ports are in 802.1Q secure mode, the frame is dropped instead.
Therefore, restrict the condition under which we rewrite an 802.1Q tag
to a DSA tag. On standalone port's, reuse is always safe since we will
always generate FROM_CPU tags in that case. For bridged ports though,
we must ensure that VLAN filtering is enabled, which in turn
guarantees that the VID in question is loaded into the VTU.
Fixes: d352b20f4174 ("net: dsa: mv88e6xxx: Improve multichip isolation of standalone ports")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220307110548.812455-1-tobias@waldekranz.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In case the MAC is using 'netif_rx()' to deliver the skb up the network
stack, it needs to check whether 'skb_defer_rx_timestmap()' is necessary
or not. In case is needed then don't call 'netif_rx()'
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220307094632.3764266-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In case of DT-configured systems it may be hard to identify the PHY
interrupt in the /proc/interrupts output. Therefore add the name to
the id to make clearer that it's about a device on a muxed mdio bus.
In my case:
Now: mdio_mux-0.e40908ff:08
Before: 0.e40908ff:08
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/00b4bb1e-98f9-b4e7-5549-e095a4701f66@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During the process of driver probing, probe function should return < 0
for failure, otherwise kernel will treat value >= 0 as success.
Therefore, the driver should set 'err' to -ENODEV when
'adapter->registered_device_map' is NULL. Otherwise kernel will assume
that the driver has been successfully probed and will cause unexpected
errors.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1646546192-32737-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pragma unroll was introduced around GCC 8, whereas current xsk code in
ice that prepares loop_unrolled_for macro that is based on mentioned
pragma, compares GCC version against 4, which is wrong and Stephen
found this out by compiling kernel with GCC 5.4 [0].
Fix this mistake and check if GCC version is >= 8.
[0]: https://lore.kernel.org/netdev/20220307213659.47658125@canb.auug.org.au/
Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20220307231353.56638-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous check handled the "if (!nh)" condition so we know "nh"
is non-NULL here. Delete the check and pull the code in one tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Roopa Prabhu <roopa@nvidia.com>
Link: https://lore.kernel.org/r/20220307125735.GC16710@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The > ARRAY_SIZE() needs to be >= ARRAY_SIZE() to prevent an out of
bounds access.
Fixes: 9f492c4cb235 ("ptp: ocp: add TOD debug information")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220307141318.GA18867@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The clang static analyzer reports this issue
rtnetlink.c:5481:2: warning: Undefined or garbage
value returned to caller
return err;
^~~~~~~~~~
There is a function level err variable, in the
list_for_each_entry_rcu block there is a shadow
err. Remove the shadow.
In the same block, the call to nla_nest_start_noflag()
can fail without setting an err. Set the err
to -EMSGSIZE.
Fixes: 216e690631f5 ("net: rtnetlink: rtnl_fill_statsinfo(): Permit non-EMSGSIZE error returns")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang static analysis reports this representative issue
dsa.c:486:2: warning: Undefined or garbage value
returned to caller
return err;
^~~~~~~~~~
err is only set in the loop. If the loop is empty,
garbage will be returned. So initialize err to 0
to handle this noop case.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fit the following coccicheck warning:
tools/testing/selftests/net/reuseport_bpf_numa.c:89:28-29:
WARNING: Use ARRAY_SIZE.
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following coccicheck warning:
drivers/net/ethernet/netronome/nfp/nfp_net_common.c:3434:8-48: WARNING
avoid newline at end of message in NL_SET_ERR_MSG_MOD
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kernel test robot reports multiple warning for smc_sysctl:
In file included from net/smc/smc_sysctl.c:17:
>> net/smc/smc_sysctl.h:23:5: warning: no previous prototype \
for function 'smc_sysctl_init' [-Wmissing-prototypes]
int smc_sysctl_init(void)
^
and
>> WARNING: modpost: vmlinux.o(.text+0x12ced2d): Section mismatch \
in reference from the function smc_sysctl_exit() to the variable
.init.data:smc_sysctl_ops
The function smc_sysctl_exit() references
the variable __initdata smc_sysctl_ops.
This is often because smc_sysctl_exit lacks a __initdata
annotation or the annotation of smc_sysctl_ops is wrong.
and
net/smc/smc_sysctl.c: In function 'smc_sysctl_init_net':
net/smc/smc_sysctl.c:47:17: error: 'struct netns_smc' has no member named 'smc_hdr'
47 | net->smc.smc_hdr = register_net_sysctl(net, "net/smc", table);
Since we don't need global sysctl initialization. To make things
clean and simple, remove the global pernet_operations and
smc_sysctl_{init|exit}. Call smc_sysctl_net_{init|exit} directly
from smc_net_{init|exit}.
Also initialized sysctl_autocorking_size if CONFIG_SYSCTL it not
set, this make sure SMC autocorking is enabled by default if
CONFIG_SYSCTL is not set.
Fixes: 462791bbfa35 ("net/smc: add sysctl interface for SMC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sebastian Andrzej Siewior says:
====================
net: Convert user to netif_rx(), part 3.
This is the third and last batch of converting netif_rx_ni() caller to
netif_rx(). The change making this possible is net-next and
netif_rx_ni() is a wrapper around netif_rx(). This is a clean up in
order to remove netif_rx_ni().
The micrel phy driver is patched twice within this series: the first is
is to replace netif_rx_ni() and second to move netif_rx() outside of the
IRQ-off section. It is probably simpler to keep it within this series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lan8814_match_rx_ts() invokes netif_rx() with disables interrupts
outside which will create a warning. Invoking netif_rx_ni() with
disabled interrupts is wrong even without the recent rework because
netif_rx_ni() would enable interrupts while processing the softirq. This
in turn can lead to dead lock if an interrupts triggers and attempts to
acquire kszphy_ptp_priv::rx_ts_lock.
Move netif_rx() outside the IRQ-off section.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Divya Koppera <Divya.Koppera@microchip.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove netif_rx_any_context and netif_rx_ni() because there are no more
users in tree.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Divya Koppera <Divya.Koppera@microchip.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Sven Eckelmann <sven@narfation.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: tipc-discussion@lists.sourceforge.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kurt Kanzenbach says:
====================
ptp: Add generic is_sync() function
as multiple PHY drivers such as micrel or TI dp83640 need to inspect whether a
given skb represents a PTP Sync message, provide a generic function for it. This
avoids code duplication and can be reused by future PHY IEEE 1588 implementations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use generic ptp_msg_is_sync() function to avoid code duplication.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use generic ptp_msg_is_sync() function to avoid code duplication.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PHY drivers such as micrel or dp83640 need to analyze whether a given
skb is a PTP sync message for one step functionality.
In order to avoid code duplication introduce a generic function and
move it to ptp classify.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sebastian Andrzej Siewior says:
====================
net: Convert user to netif_rx(), part 2.
This is the second batch of converting netif_rx_ni() caller to
netif_rx(). The change making this possible is net-next and
netif_rx_ni() is a wrapper around netif_rx(). This is a clean up in
order to remove netif_rx_ni().
The brcmfmac changes are slilghtly larger because the inirq parameter
can be removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi017@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Cc: libertas-dev@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: Wright Feng <wright.feng@infineon.com>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Maya Erez <merez@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Cc: wil6210@qti.qualcomm.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-can@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dongli Zhang says:
====================
tun/tap: use kfree_skb_reason() to trace dropped skb
The commit c504e5c2f964 ("net: skb: introduce kfree_skb_reason()") has
introduced the kfree_skb_reason() to help track the reason.
The tun and tap are commonly used as virtio-net/vhost-net backend. This is to
use kfree_skb_reason() to trace the dropped skb for those two drivers.
Changed since v1:
- I have renamed many of the reasons since v1. I make them as generic as
possible so that they can be re-used by core networking and drivers.
Changed since v2:
- declare drop_reason as type "enum skb_drop_reason"
- handle the drop in skb_list_walk_safe() case for tap driver, and
kfree_skb_list_reason() is introduced
Changed since v3 (only for PATCH 4/4):
- rename to TAP_FILTER and TAP_TXFILTER
- honor reverse xmas tree style declaration for 'drop_reason' in
tun_net_xmit()
Changed since v4:
- make kfree_skb_list() static inline
- add 'computation' to SKB_CSUM comment
- change COPY_DATA to UCOPY_FAULT
- add 'metadata' to DEV_HDR comment
- expand comment on DEV_READY
- change SKB_TRIM to NOMEM
- chnage SKB_PULL to HDR_TRUNC
Changed since v5:
- rebase to net-next
The following reasons are introduced.
- SKB_DROP_REASON_SKB_CSUM
- SKB_DROP_REASON_SKB_GSO_SEG
- SKB_DROP_REASON_SKB_UCOPY_FAULT
- SKB_DROP_REASON_DEV_HDR
- SKB_DROP_REASON_FULL_RING
- SKB_DROP_REASON_DEV_READY
- SKB_DROP_REASON_NOMEM
- SKB_DROP_REASON_HDR_TRUNC
- SKB_DROP_REASON_TAP_FILTER
- SKB_DROP_REASON_TAP_TXFILTER
This is the output for TUN device.
<idle>-0 [029] ..s1. 450.727651: kfree_skb: skbaddr=0000000023d235cc protocol=0 location=00000000a6748854 reason: NOT_SPECIFIED
<idle>-0 [000] b.s3. 451.165671: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
<idle>-0 [000] b.s3. 453.149650: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
<idle>-0 [000] b.s3. 455.133576: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
<idle>-0 [000] b.s3. 457.117566: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
This is the output for TAP device.
arping-7053 [006] ..s1. 1000.047753: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
<idle>-0 [022] ..s1. 1000.778514: kfree_skb: skbaddr=000000002c1e706c protocol=0 location=00000000a6748854 reason: NOT_SPECIFIED
arping-7053 [006] ..s1. 1001.047830: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
arping-7053 [006] ..s1. 1002.047918: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
arping-7053 [006] ..s1. 1003.048017: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the
interface to forward the skb from TUN to vhost-net/virtio-net.
However, there are many "goto drop" in the TUN driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_DEV_READY
- SKB_DROP_REASON_NOMEM
- SKB_DROP_REASON_HDR_TRUNC
- SKB_DROP_REASON_TAP_FILTER
- SKB_DROP_REASON_TAP_TXFILTER
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No functional change.
Just to split the if statement into different conditions to use
kfree_skb_reason() to trace the reason later.
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is
the interface to forward the skb from TAP to vhost-net/virtio-net.
However, there are many "goto drop" in the TAP driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_SKB_CSUM
- SKB_DROP_REASON_SKB_GSO_SEG
- SKB_DROP_REASON_SKB_UCOPY_FAULT
- SKB_DROP_REASON_DEV_HDR
- SKB_DROP_REASON_FULL_RING
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit a505cce6f7cfaf2aa2385aab7286063c96444526.
Leon says:
We already discussed that. SMC should be changed to use
RDMA CQ pool API
drivers/infiniband/core/cq.c.
ib_poll_handler() has much better implementation (tracing,
IRQ rescheduling, proper error handling) than this SMC variant.
Since we will switch to ib_poll_handler() in the future,
revert this patch.
Link: https://lore.kernel.org/netdev/20220301105332.GA9417@linux.alibaba.com/
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
====================
bnxt_en: Updates.
This patch series contains mainly NVRAM related features. More
NVRAM error checking and logging are added when installing firmware
packages. A new devlink hw health report is now added to report
and diagnose NVRAM issues. Other miscellaneous patches include
reporting correctly cards that don't support link pause, adding
an internal unknown link state, and avoiding unnecessary link
toggle during firmware reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an NVM test function for devlink hw reporter.
In this function an NVM VPD area is read followed by
a write. Test result is cached and if it is successful then
the next test can be conducted only after HW_RETEST_MIN_TIME to
avoid frequent writes to the NVM.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reporter will report NVM errors which are non-fatal.
When we receive these NVM error events, we'll report it
through this new hw health reporter.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Health reporter state should be maintained over resets. Previously
reporters were destroyed if the device capabilities changed, but
since none of the reporters depend on capabilities anymore, this
logic should be removed.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily. This link toggle
will increase the down time by a few seconds.
The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset. This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG
bit should not be added to link_info->req_flow_ctrl.
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some cards are configured to never support link pause or PFC. Discover
these cards and properly report no pause support to ethtool. Disable
PFC settings from DCBNL if PFC is unsupported.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will force link state to always be logged for initial NIC open.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
