| Age | Commit message (Collapse) | Author |
|---|
|
Remove the inode variable now that the last user is gone.
Fixes: a17ece76bcfe ("loop: regularize upgrading the block size for direct I/O")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240705053114.2042976-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify bio_integrity_clone to reuse the original bvec array instead of
allocating and copying it, similar to how bio data path is cloned.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240702100753.2168-1-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No functional changes intended.
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240704010638.324349-1-yanjun.zhu@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.11/block
Merge MD fixes from Song:
"This PR contains various small fixes by Yu Kuai,
Benjamin Marzinski, Christophe JAILLET, and Yang Li."
* tag 'md-6.11-20240704' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5: recheck if reshape has finished with device_lock held
md: Don't wait for MD_RECOVERY_NEEDED for HOT_REMOVE_DISK ioctl
md-cluster: Constify struct md_cluster_operations
md: Remove unneeded semicolon
md/raid5: fix spares errors about rcu usage
|
|
Commit c6e56cf6b2e7 ("block: move integrity information into
queue_limits") changed the ref tag calculation logic. It would break if
there is no integrity profile. This in turn causes read/write failures
for such cases.
Fixes: c6e56cf6b2e7 ("block: move integrity information into queue_limits")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/20240704061515.282343-1-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When handling an IO request, MD checks if a reshape is currently
happening, and if so, where the IO sector is in relation to the reshape
progress. MD uses conf->reshape_progress for both of these tasks. When
the reshape finishes, conf->reshape_progress is set to MaxSector. If
this occurs after MD checks if the reshape is currently happening but
before it calls ahead_of_reshape(), then ahead_of_reshape() will end up
comparing the IO sector against MaxSector. During a backwards reshape,
this will make MD think the IO sector is in the area not yet reshaped,
causing it to use the previous configuration, and map the IO to the
sector where that data was before the reshape.
This bug can be triggered by running the lvm2
lvconvert-raid-reshape-linear_to_raid6-single-type.sh test in a loop,
although it's very hard to reproduce.
Fix this by factoring the code that checks where the IO sector is in
relation to the reshape out to a helper called get_reshape_loc(),
which reads reshape_progress and reshape_safe while holding the
device_lock, and then rechecks if the reshape has finished before
calling ahead_of_reshape with the saved values.
Also use the helper during the REQ_NOWAIT check to see if the location
is inside of the reshape region.
Fixes: fef9c61fdfabf ("md/raid5: change reshape-progress measurement to cope with reshaping backwards.")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240702151802.1632010-1-bmarzins@redhat.com
|
|
Commit 90f5f7ad4f38 ("md: Wait for md_check_recovery before attempting
device removal.") explained in the commit message that failed device
must be reomoved from the personality first by md_check_recovery(),
before it can be removed from the array. That's the reason the commit
add the code to wait for MD_RECOVERY_NEEDED.
However, this is not the case now, because remove_and_add_spares() is
called directly from hot_remove_disk() from ioctl path, hence failed
device(marked faulty) can be removed from the personality by ioctl.
On the other hand, the commit introduced a performance problem that
if MD_RECOVERY_NEEDED is set and the array is not running, ioctl will
wait for 5s before it can return failure to user.
Since the waiting is not needed now, fix the problem by removing the
waiting.
Fixes: 90f5f7ad4f38 ("md: Wait for md_check_recovery before attempting device removal.")
Reported-by: Mateusz Kusiak <mateusz.kusiak@linux.intel.com>
Closes: https://lore.kernel.org/all/814ff6ee-47a2-4ba0-963e-cf256ee4ecfa@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240627112321.3044744-1-yukuai1@huaweicloud.com
|
|
'struct md_cluster_operations' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
51941 1442 80 53463 d0d7 drivers/md/md-cluster.o
After:
=====
text data bss dec hex filename
52133 1246 80 53459 d0d3 drivers/md/md-cluster.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/3727f3ce9693cae4e62ae6778ea13971df805479.1719173852.git.christophe.jaillet@wanadoo.fr
|
|
./drivers/md/md.c:630:21-22: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9344
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240618010759.85416-1-yang.lee@linux.alibaba.com
|
|
As commit ad8606702f26 ("md/raid5: remove rcu protection to access rdev
from conf") explains, rcu protection can be removed, however, there are
three places left, there won't be any real problems.
drivers/md/raid5.c:8071:24: error: incompatible types in comparison expression (different address spaces):
drivers/md/raid5.c:8071:24: struct md_rdev [noderef] __rcu *
drivers/md/raid5.c:8071:24: struct md_rdev *
drivers/md/raid5.c:7569:25: error: incompatible types in comparison expression (different address spaces):
drivers/md/raid5.c:7569:25: struct md_rdev [noderef] __rcu *
drivers/md/raid5.c:7569:25: struct md_rdev *
drivers/md/raid5.c:7573:25: error: incompatible types in comparison expression (different address spaces):
drivers/md/raid5.c:7573:25: struct md_rdev [noderef] __rcu *
drivers/md/raid5.c:7573:25: struct md_rdev *
Fixes: ad8606702f26 ("md/raid5: remove rcu protection to access rdev from conf")
Cc: stable@vger.kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240615085143.1648223-1-yukuai1@huaweicloud.com
|
|
Ensure that info->sector_size and info->physical_sector_size are set
before the call to blkif_set_queue_limits by doing away with the
local variables and arguments that propagate them.
Thanks to Marek Marczykowski-Górecki and Jürgen Groß for root causing
the issue.
Fixes: ba3f67c11638 ("xen-blkfront: atomically update queue limits")
Reported-by: Rusty Bird <rustybird@net-c.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240625055238.7934-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The description of the fua module parameter is defined using
MODULE_PARM_DESC() with the first argument passed being "zoned". That is
the wrong name, obviously. Fix that by using the correct "fua" parameter
name so that "modinfo null_blk" displays correct information.
Fixes: f4f84586c8b9 ("null_blk: Introduce fua attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240702073234.206458-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current tag reservation code is based on a misunderstanding of the
meaning of data->shallow_depth. Fix the tag reservation code as follows:
* By default, do not reserve any tags for synchronous requests because
for certain use cases reserving tags reduces performance. See also
Harshit Mogalapalli, [bug-report] Performance regression with fio
sequential-write on a multipath setup, 2024-03-07
(https://lore.kernel.org/linux-block/5ce2ae5d-61e2-4ede-ad55-551112602401@oracle.com/)
* Reduce min_shallow_depth to one because min_shallow_depth must be less
than or equal any shallow_depth value.
* Scale dd->async_depth from the range [1, nr_requests] to [1,
bits_per_sbitmap_word].
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Zhiguo Niu <zhiguo.niu@unisoc.com>
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240509170149.7639-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call .limit_depth() after data->hctx has been set such that data->hctx can
be used in .limit_depth() implementations.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Zhiguo Niu <zhiguo.niu@unisoc.com>
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240509170149.7639-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The round-robin path selector is inefficient in cases where there is a
difference in latency between paths. In the presence of one or more
high latency paths the round-robin selector continues to use the high
latency path equally. This results in a bias towards the highest latency
path and can cause a significant decrease in overall performance as IOs
pile on the highest latency path. This problem is acute with NVMe-oF
controllers.
The queue-depth path selector sends I/O down the path with the lowest
number of requests in its request queue. Paths with lower latency will
clear requests more quickly and have less requests queued compared to
higher latency paths. The goal of this path selector is to make more use
of lower latency paths which will bring down overall IO latency and
increase throughput and performance.
Signed-off-by: Thomas Song <tsong@purestorage.com>
[emilne: commandeered patch developed by Thomas Song @ Pure Storage]
Co-developed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Co-developed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Link: https://lore.kernel.org/linux-nvme/20240509202929.831680-1-jmeneghi@redhat.com/
Tested-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Jyoti Rani <jrani@purestorage.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NOWS is one of the annoying "0's based values" in NVMe, where 0 means one
and we thus can't detect if it isn't set. Thus a NOWS value of 0 means
that the Namespace Optimal Write Size is a single LBA, which is clearly
bogus. Ignore the value in that case and don't propagate an io_opt
value to the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't reduce the max_sectors value below the normal cap when the driver
advertsizes a very low io_opt. This restores the behavior we had before
the recent changes to the max_sectors calculation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If io_min is larger than the cap, it must by definition be non-zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now we avoid throttling swap writes by determining whether the current
process is kswapd (aka current_is_kswapd()), but swap writes can come
from either kswapd or direct reclaim, so the swap writes from direct
reclaim will still be throttled.
When a process holds a lock to allocate a free page, and enters direct
reclaim because there is no free memory, then it might trigger a hung
due to the wbt throttling that causes other processes to fail to get
the lock.
Both kswapd and direct reclaim set the REQ_SWAP flag, so use REQ_SWAP
instead of current_is_kswapd() to avoid throttling swap writes. Also
renamed WBT_KSWAPD to WBT_SWAP and WBT_RWQ_KSWAPD to WBT_RWQ_SWAP.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240604030522.3686177-1-libaokun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kobject for the queue entries is embedded into a struct gendisk.
Pass it to the sysfs methods instead of the request_queue derived from
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240627111407.476276-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A lof the code to implement the queue sysfs attributes is repetitive.
Add a few macros to generate the common cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240627111407.476276-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_logical_block_size is never called with a 0 queue, and the
logical_block_size field in queue_limits is always initialized for
a live queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240627111407.476276-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
User will configure allowed iops limit in 1s, and calculate_io_allowed()
will calculate allowed iops in the slice by:
limit * HZ / throtl_slice
However, if limit is quite low, the result can be 0, then
allowed IO in the slice is 0, this will cause missing dispatch and
control will be lower than limit.
For example, set iops_limit to 5 with HD disk, and test will found that
iops will be 3.
This is usually not a big deal, because user will unlikely to configure
such low iops limit, however, this is still a problem in the extreme
scene.
Fix the problem by making sure the wait time calculated by
tg_within_iops_limit() should allow at least one IO to be dispatched.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240618062108.3680835-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the bip_vcnt correctly in bio_integrity_init_user and
bio_integrity_copy_user. If the bio gets split at a later point,
this value is required to set the right bip_vcnt in the cloned bio.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240626100700.3629-3-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Block device features and flags were refactored from `enum` to `#define`.
This broke Rust binding generation. This patch fixes the binding
generation.
Fixes: fcf865e357f8 ("block: convert features and flags to __bitwise types")
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20240628091152.2185241-1-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
QUEUE_FLAG_SAME_FORCE has been set by rnbd-cnt since the initial
merge. There is no good reason for a driver to force exact core
delivery, which is tunable for very specific workloads and not a
driver setting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
QUEUE_FLAG_SAME_COMP is already set by default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting QUEUE_FLAG_NOMERGES was added in commit d1b01d14b7ba ("scsi:
mpt3sas: Set NVMe device queue depth as 128") without any explanation.
Drivers should second guess the block layer merge decisions, so remove
the flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting QUEUE_FLAG_NOMERGES was added in commit 15dd03811d99dcf
("scsi: megaraid_sas: NVME Interface detection and prop settings")
without any explanation. Drivers should second guess the block
layer merge decisions, so remove the flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
QUEUE_FLAG_NOMERGES isn't really a driver interface, but a user tunable.
There also isn't any good reason to set it in the loop driver.
The original commit adding it (5b5e20f421c0b6d "block: loop: set
QUEUE_FLAG_NOMERGES for request queue of loop") claims that "It doesn't
make sense to enable merge because the I/O submitted to backing file is
handled page by page." which of course isn't true for multi-page bvec
now, and it never has been for direct I/O, for which commit 40326d8a33d
("block/loop: allow request merge for directio mode") alredy disabled
the nomerges flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IO logical block size is one fundamental queue limit, and every IO has
to be aligned with logical block size because our bio split can't deal
with unaligned bio.
The check has to be done with queue usage counter grabbed because device
reconfiguration may change logical block size, and we can prevent the
reconfiguration from happening by holding queue usage counter.
logical_block_size stays in the 1st cache line of queue_limits, and this
cache line is always fetched in fast path via bio_may_exceed_limits(),
so IO perf won't be affected by this check.
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240620030631.3114026-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sometimes we need to track the processing order of requests with
ioprio set. So the ioprio of request can be useful information.
Example：
block_rq_insert: 8,0 RA 16384 () 6500840 + 32 be,0,6 [binder:815_3]
block_rq_issue: 8,0 RA 16384 () 6500840 + 32 be,0,6 [binder:815_3]
block_rq_complete: 8,0 RA () 6500840 + 32 be,0,6 [0]
Signed-off-by: Dongliang Cui <dongliang.cui@unisoc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240614074936.113659-1-dongliang.cui@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the bvec interation into the generate/verify helpers to avoid a bit
of argument passing churn.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240626045950.189758-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a single switch to perform read and write specific checks and exit
early for other operations instead of having two checks using different
predicates.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240626045950.189758-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allocation failures already leave a stack trace, so don't spew another
warning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240626045950.189758-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_integrity_add_page can add physically contiguous regions of any size,
so don't bother chunking up the kmalloced buffer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240626045950.189758-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The PI generation helpers already zero the app tag, so relax the zeroing
to non-PI metadata.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240626045950.189758-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sparse is a bit dumb about bitwise operation on __bitwise types used
in boolean contexts. Add a !! to explicitly propagate to boolean
without a warning.
Fixes: fcf865e357f8 ("block: convert features and flags to __bitwise types")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240628131657.667797-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
1. Userspace sends the command "losetup -d" which uses the open() call
to open the device
2. Kernel receives the ioctl command "LOOP_CLR_FD" which calls the
function loop_clr_fd()
3. If LOOP_CLR_FD is the first command received at the time, then the
AUTOCLEAR flag is not set and deletion of the
loop device proceeds ahead and scans the partitions (drop/add
partitions)
if (disk_openers(lo->lo_disk) > 1) {
lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
loop_global_unlock(lo, true);
return 0;
}
4. Before scanning partitions, it will check to see if any partition of
the loop device is currently opened
5. If any partition is opened, then it will return EBUSY:
if (disk->open_partitions)
return -EBUSY;
6. So, after receiving the "LOOP_CLR_FD" command and just before the above
check for open_partitions, if any other command
(like blkid) opens any partition of the loop device, then the partition
scan will not proceed and EBUSY is returned as shown in above code
7. But in "__loop_clr_fd()", this EBUSY error is not propagated
8. We have noticed that this is causing the partitions of the loop to
remain stale even after the loop device is detached resulting in the
IO errors on the partitions
Fix:
Defer the detach of loop device to release function, which is called when
the last close happens, by setting the lo_flags to LO_FLAGS_AUTOCLEAR at
the time of detach i.e in loop_clr_fd() function.
Test case involves the following two scripts:
script1.sh:
while [ 1 ];
do
losetup -P -f /home/opt/looptest/test10.img
blkid /dev/loop0p1
done
script2.sh:
while [ 1 ];
do
losetup -d /dev/loop0
done
Without fix, the following IO errors have been observed:
kernel: __loop_clr_fd: partition scan of loop0 failed (rc=-16)
kernel: I/O error, dev loop0, sector 20971392 op 0x0:(READ) flags 0x80700
phys_seg 1 prio class 0
kernel: I/O error, dev loop0, sector 108868 op 0x0:(READ) flags 0x0
phys_seg 1 prio class 0
kernel: Buffer I/O error on dev loop0p1, logical block 27201, async page
read
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240618164042.343777-1-gulam.mohamed@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 70200574cc22 ("block: remove QUEUE_FLAG_DISCARD"),
blk_queue_flag_test_and_set() has not been used, so delete it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240627160735.842189-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is odd to check the offset amidst a series of assignments. Moving this
check to the beginning of the function makes the code look better.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240625115517.1472120-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For !CONFIG_BLK_DEV_INTEGRITY, rq_integrity_vec() wasn't updated
properly. Fix it up.
Fixes: cf546dd289e0 ("block: change rq_integrity_vec to respect the iterator")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch prepares for the introduction of a new iopolicy by breaking up
the nvme_find_path() code path into sub-routines.
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that all updates go through blk_validate_limits the default of 511
is set at initialization time. Also remove the unused NULL check as
calling this helper on a NULL queue can't happen (and doesn't make
much sense to start with).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mark blk_apply_bdi_limits non-static and open code disk_update_readahead
in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
"static" never goes on a line of its own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
... and let sparse help us catch mismatches or abuses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is a flag for ->flags and not a feature for ->features. And fix the
one place that actually incorrectly cleared it from ->features.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check the features flag and the override flag using the
blk_queue_write_cache, helper otherwise we're going to always
report "write through".
Fixes: 1122c0c1cc71 ("block: move cache control settings out of queue->flags")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240626142637.300624-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
