Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and bpf.
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event()
fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and
vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"
* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: check dev->gso_max_size in gso_features_check()
kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
net/ipv6: Revert remove expired routes with a separated list of routes
net: avoid build bug in skb extension length calculation
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
net: stmmac: fix incorrect flag check in timestamp interrupt
selftests: add vlan hw filter tests
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
net: hns3: add new maintainer for the HNS3 ethernet driver
net: mana: select PAGE_POOL
net: ks8851: Fix TX stall caused by TX buffer overrun
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
mailmap: add entries for Geliang Tang
mptcp: fill in missing MODULE_DESCRIPTION()
mptcp: fix inconsistent state on fastopen race
selftests: mptcp: join: fix subflow_send_ack lookup
net: phy: skip LED triggers on PHYs on SFP modules
bpf: Add missing BPF_LINK_TYPE invocations
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-21
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).
The main changes are:
1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
from Jiri Olsa.
2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
in BPF sockmap for unconnected unix sockets, from John Fastabend.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add missing BPF_LINK_TYPE invocations
bpf: sockmap, test for unconnected af_unix sock
bpf: syzkaller found null ptr deref in unix_bpf proto add
====================
Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.
Before fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
1
After fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
0
Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 3dec89b14d37ee635e772636dad3f09f78f1ab87.
The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.
Fixes: 3dec89b14d37 ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-12-18 (ice)
This series contains updates to ice driver only.
Jakes stops clearing of needed aggregator information.
Dave adds a check for LAG device support before initializing the
associated event handler.
Larysa restores accounting of XDP queues in TC configurations.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
====================
Link: https://lore.kernel.org/r/20231218192708.3397702-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GCC seems to incorrectly fail to evaluate skb_ext_total_length() at
compile time under certain conditions.
The issue even occurs if all values in skb_ext_type_len[] are "0",
ruling out the possibility of an actual overflow.
As the patch has been in mainline since v6.6 without triggering the
problem it seems to be a very uncommon occurrence.
As the issue only occurs when -fno-tree-loop-im is specified as part of
CFLAGS_GCOV, disable the BUILD_BUG_ON() only when building with coverage
reporting enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171924.4FozI5FG-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/487cfd35-fe68-416f-9bfd-6bb417f98304@app.fastmail.com/
Fixes: 5d21d0a65b57 ("net: generalize calculation of skb extensions length")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231218-net-skbuff-build-bug-v1-1-eefc2fb0a7d3@weissschuh.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mtk_wed_wo_queue_tx_clean()
In order to avoid a NULL pointer dereference, check entry->buf pointer before running
skb_free_frag in mtk_wed_wo_queue_tx_clean routine.
Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull smb client fixes from Steve French:
- two multichannel reconnect fixes, one fixing an important refcounting
problem that can lead to umount problems
- atime fix
- five fixes for various potential OOB accesses, including a CVE fix,
and two additional fixes for problems pointed out by Robert Morris's
fuzzing investigation
* tag '6.7-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not let cifs_chan_update_iface deallocate channels
cifs: fix a pending undercount of srv_count
fs: cifs: Fix atime update check
smb: client: fix potential OOB in smb2_dump_detail()
smb: client: fix potential OOB in cifs_dump_detail()
smb: client: fix OOB in smbCalcSize()
smb: client: fix OOB in SMB2_query_info_init()
smb: client: fix OOB in cifsd when receiving compounded resps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead to
corruption of vector registers 8-15
- Update defconfigs
* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/vx: fix save/restore of fpu kernel context
s390/scm: fix virtual vs physical address confusion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a handful of bugfixes this time, which feels almost too
small, so I hope we are not missing something important.
- One more mediatek dts warning fix after the previous larger set,
this should finally result in a clean defconfig build.
- TI OMAP dts fixes for a spurious hang on am335x and invalid data on
DTA7
- One DTS fix for ethernet on Oriange Pi Zero (Allwinner H616)
- A regression fix for ti-sysc interconnect target module driver to
not access registers after reset if srst_udelay quirk is needed
- Reset controller driver fixes for a crash during error handling and
a build warning"
* tag 'soc-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: mediatek: mt8395-genio-1200-evk: add interrupt-parent for mt6360
ARM: dts: Fix occasional boot hang for am3 usb
reset: Fix crash when freeing non-existent optional resets
ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
ARM: dts: dra7: Fix DRA7 L3 NoC node register size
bus: ti-sysc: Flush posted write only after srst_udelay
reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning
arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- Fan reporting on some ThinkPads
- Laptop 13 spurious keypresses while suspended
- Intel PMC correction to avoid crash
* tag 'platform-drivers-x86-v6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13
platform/x86/amd/pmc: Move keyboard wakeup disablement detection to pmc-quirks
platform/x86/amd/pmc: Only run IRQ1 firmware version check on Cezanne
platform/x86/amd/pmc: Move platform defines to header
platform/x86/intel/pmc: Fix hang in pmc_core_send_ltr_ignore()
platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fix from Amir Goldstein:
"Fix a regression from this merge window"
* tag 'ovl-fixes-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix dentry reference leak after changes to underlying layers
|
|
Pull more bcachefs fixes from Kent Overstreet:
- Fix a deadlock in the data move path with nocow locks (vs. update in
place writes); when trylock failed we were incorrectly waiting for in
flight ios to flush.
- Fix reporting of NFS file handle length
- Fix early error path in bch2_fs_alloc() - list head wasn't being
initialized early enough
- Make sure correct (hardware accelerated) crc modules get loaded
- Fix a rare overflow in the btree split path, when the packed bkey
format grows and all the keys have no value (LRU btree).
- Fix error handling in the sector allocator
This was causing writes to spuriously fail in multidevice setups, and
another bug meant that the errors weren't being logged, only reported
via fsync.
* tag 'bcachefs-2023-12-19' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix bch2_alloc_sectors_start_trans() error handling
bcachefs; guard against overflow in btree node split
bcachefs: btree_node_u64s_with_format() takes nr keys
bcachefs: print explicit recovery pass message only once
bcachefs: improve modprobe support by providing softdeps
bcachefs: fix invalid memory access in bch2_fs_alloc() error path
bcachefs: Fix determining required file handle length
bcachefs: Fix nocow locks deadlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a few recently-introduced issues
* tag 'nfsd-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Revert 5f7fc5d69f6e92ec0b38774c387f5cf7812c5806
NFSD: Revert 738401a9bd1ac34ccd5723d69640a4adbb1a4bc0
NFSD: Revert 6c41d9a9bd0298002805758216a9c44e38a8500d
nfsd: hold nfsd_mutex across entire netlink operation
nfsd: call nfsd_last_thread() before final nfsd_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- DM raid target (and MD raid) fix for reconfig_mutex MD deadlock that
should have been merged along with recent v6.7-rc6 MD fixes (see MD
related commits: f2d87a759f68^..b39113349de6)
- DM integrity target fix to avoid modifying immutable biovec in the
integrity_metadata() edge case where kmalloc fails.
- Fix drivers/md/Kconfig so DM_AUDIT depends on BLK_DEV_DM.
- Update DM entry in MAINTAINERS to remove stale info.
* tag 'dm-6.7/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
MAINTAINERS: remove stale info for DEVICE-MAPPER
dm audit: fix Kconfig so DM_AUDIT depends on BLK_DEV_DM
dm-integrity: don't modify bio's immutable bio_vec in integrity_metadata()
dm-raid: delay flushing event_work() after reconfig_mutex is released
|
|
This patch fix the warning introduced by mt6360 node in
mt8395-genio-1200-evk.dts.
arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning (interrupts_property): /soc/i2c@11d01000/pmic@34:#interrupt-cells: size is (8), expected multiple of 16
Add a missing 'interrupt-parent' to fix this warning.
Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-devicetree/20231212214737.230115-1-arnd@kernel.org/
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix for occasional boot hang for am335x USB
A fix for occasional boot hang for am335x USB that I've only recently
started noticing.
This can be merged naturally whenever suitable. This issue has been seen
with other similar SoCs earlier and has clearly existed for a long time.
* tag 'am3-usb-hang-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix occasional boot hang for am3 usb
Link: https://lore.kernel.org/r/pull-1703071616-395333@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A few fixes for omaps:
- A regression fix for ti-sysc interconnect target module driver to not access
registers after reset if srst_udelay quirk is needed
- DRA7 L3 NoC node register size fix
* tag 'omap-for-v6.7/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
ARM: dts: dra7: Fix DRA7 L3 NoC node register size
bus: ti-sysc: Flush posted write only after srst_udelay
Link: https://lore.kernel.org/r/pull-1702037799-781982@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The driver should continue get the timestamp if STMMAC_FLAG_EXT_SNAPSHOT_EN
flag is set.
Fixes: aa5513f5d95f ("net: stmmac: replace the ext_snapshot_en field with a flag")
Cc: <stable@vger.kernel.org> # 6.6
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Add encryption key size check when acting as peripheral
- Shut up false-positive build warning
- Send reject if L2CAP command request is corrupted
- Fix Use-After-Free in bt_sock_recvmsg
- Fix not notifying when connection encryption changes
- Fix not checking if HCI_OP_INQUIRY has been sent
- Fix address type send over to the MGMT interface
- Fix deadlock in vhci_send_frame
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we fail to allocate because of insufficient open buckets, we don't
want to retry from the full set of devices - we just want to retry in
blocking mode.
But if the retry in blocking mode fails with a different error code, we
end up squashing the -BCH_ERR_open_buckets_empty error with an error
that makes us thing we won't be able to allocate (insufficient_devices)
- which is incorrect when we didn't try to allocate from the full set of
devices, and causes the write to fail.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"While working on the ring buffer, I found one more bug with the
timestamp code, and the fix for this removed the need for the final
64-bit cmpxchg!
The ring buffer events hold a "delta" from the previous event. If it
is determined that the delta can not be calculated, it falls back to
adding an absolute timestamp value. The way to know if the delta can
be used is via two stored timestamps in the per-cpu buffer meta data:
before_stamp and write_stamp
The before_stamp is written by every event before it tries to allocate
its space on the ring buffer. The write_stamp is written after it
allocates its space and knows that nothing came in after it read the
previous before_stamp and write_stamp and the two matched.
A previous fix dd9394257078 ("ring-buffer: Do not try to put back
write_stamp") removed putting back the write_stamp to match the
before_stamp so that the next event could use the delta, but races
were found where the two would match, but not be for of the previous
event.
It was determined to allow the event reservation to not have a valid
write_stamp when it is finished, and this fixed a lot of races.
The last use of the 64-bit timestamp cmpxchg depended on the
write_stamp being valid after an interruption. But this is no longer
the case, as if an event is interrupted by a softirq that writes an
event, and that event gets interrupted by a hardirq or NMI and that
writes an event, then the softirq could finish its reservation without
a valid write_stamp.
In the slow path of the event reservation, a delta can still be used
if the write_stamp is valid. Instead of using a cmpxchg against the
write stamp, the before_stamp needs to be read again to validate the
write_stamp. The cmpxchg is not needed.
This updates the slowpath to validate the write_stamp by comparing it
to the before_stamp and removes all rb_time_cmpxchg() as there are no
more users of that function.
The removal of the 32-bit updates of rb_time_t will be done in the
next merge window"
* tag 'trace-v6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix slowpath of interrupted event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- build error for hugetlb, sparse and smatch fixes
- removal of VIPT aliasing cache code
* tag 'arc-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: add hugetlb definitions
ARC: fix smatch warning
ARC: fix spare error
ARC: mm: retire support for aliasing VIPT D$
ARC: entry: move ARCompact specific bits out of entry.h
ARC: entry: SAVE_ABI_CALLEE_REG: ISA/ABI specific helper
|
|
cifs_chan_update_iface is meant to check and update the server
interface used for a channel when the existing server interface
is no longer available.
So far, this handler had the code to remove an interface entry
even if a new candidate interface is not available. Allowing
this leads to several corner cases to handle.
This change makes the logic much simpler by not deallocating
the current channel interface entry if a new interface is not
found to replace it with.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The following commit reverted the changes to ref count
the server struct while scheduling a reconnect work:
823342524868 Revert "cifs: reconnect work should have reference on server struct"
However, a following change also introduced scheduling
of reconnect work, and assumed ref counting. This change
fixes that as well.
Fixes umount problems like:
[73496.157838] CPU: 5 PID: 1321389 Comm: umount Tainted: G W OE 6.7.0-060700rc6-generic #202312172332
[73496.157841] Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET67W (1.50 ) 12/15/2022
[73496.157843] RIP: 0010:cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.157906] Code: 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc e8 4a 6e 14 e6 e9 f6 fe ff ff be 03 00 00 00 48 89 d7 e8 78 26 b3 e5 e9 e4 fe ff ff <0f> 0b e9 b1 fe ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90
[73496.157908] RSP: 0018:ffffc90003bcbcb8 EFLAGS: 00010286
[73496.157911] RAX: 00000000ffffffff RBX: ffff8885830fa800 RCX: 0000000000000000
[73496.157913] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[73496.157915] RBP: ffffc90003bcbcc8 R08: 0000000000000000 R09: 0000000000000000
[73496.157917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[73496.157918] R13: ffff8887d56ba800 R14: 00000000ffffffff R15: ffff8885830fa800
[73496.157920] FS: 00007f1ff0e33800(0000) GS:ffff88887ba80000(0000) knlGS:0000000000000000
[73496.157922] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[73496.157924] CR2: 0000115f002e2010 CR3: 00000003d1e24005 CR4: 00000000003706f0
[73496.157926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[73496.157928] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[73496.157929] Call Trace:
[73496.157931] <TASK>
[73496.157933] ? show_regs+0x6d/0x80
[73496.157936] ? __warn+0x89/0x160
[73496.157939] ? cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.157976] ? report_bug+0x17e/0x1b0
[73496.157980] ? handle_bug+0x51/0xa0
[73496.157983] ? exc_invalid_op+0x18/0x80
[73496.157985] ? asm_exc_invalid_op+0x1b/0x20
[73496.157989] ? cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.158023] ? cifs_put_tcp_session+0x1e/0x190 [cifs]
[73496.158057] __cifs_put_smb_ses+0x2b5/0x540 [cifs]
[73496.158090] ? tconInfoFree+0xc2/0x120 [cifs]
[73496.158130] cifs_put_tcon.part.0+0x108/0x2b0 [cifs]
[73496.158173] cifs_put_tlink+0x49/0x90 [cifs]
[73496.158220] cifs_umount+0x56/0xb0 [cifs]
[73496.158258] cifs_kill_sb+0x52/0x60 [cifs]
[73496.158306] deactivate_locked_super+0x32/0xc0
[73496.158309] deactivate_super+0x46/0x60
[73496.158311] cleanup_mnt+0xc3/0x170
[73496.158314] __cleanup_mnt+0x12/0x20
[73496.158330] task_work_run+0x5e/0xa0
[73496.158333] exit_to_user_mode_loop+0x105/0x130
[73496.158336] exit_to_user_mode_prepare+0xa5/0xb0
[73496.158338] syscall_exit_to_user_mode+0x29/0x60
[73496.158341] do_syscall_64+0x6c/0xf0
[73496.158344] ? syscall_exit_to_user_mode+0x37/0x60
[73496.158346] ? do_syscall_64+0x6c/0xf0
[73496.158349] ? exit_to_user_mode_prepare+0x30/0xb0
[73496.158353] ? syscall_exit_to_user_mode+0x37/0x60
[73496.158355] ? do_syscall_64+0x6c/0xf0
Reported-by: Robert Morris <rtm@csail.mit.edu>
Fixes: 705fc522fe9d ("cifs: handle when server starts supporting multichannel")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Commit 9b9c5bea0b96 ("cifs: do not return atime less than mtime") indicates
that in cifs, if atime is less than mtime, some apps will break.
Therefore, it introduce a function to compare this two variables in two
places where atime is updated. If atime is less than mtime, update it to
mtime.
However, the patch was handled incorrectly, resulting in atime and mtime
being exactly equal. A previous commit 69738cfdfa70 ("fs: cifs: Fix atime
update check vs mtime") fixed one place and forgot to fix another. Fix it.
Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime")
Cc: stable@vger.kernel.org
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Validate SMB message with ->check_message() before calling
->calc_smb_size().
This fixes CVE-2023-6610.
Reported-by: j51569436@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218219
Cc; stable@vger.kernel.org
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
'check-vlan-filter-feature-in-vlan_vids_add_by_dev-and-vlan_vids_del_by_dev'
Liu Jian says:
====================
check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
v2->v3:
Filter using vlan_hw_filter_capable().
Add one basic test.
====================
Link: https://lore.kernel.org/r/20231216075219.2379123-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vlan_vids_del_by_dev()
I got the below warning trace:
WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe
It can be repoduced via:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode 0
ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
ip netns del ns1
This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.
To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.
Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao will be responsible for
maintaining the hns3 driver's code in the future,
so add Jijie to the hns3 driver's matainer list.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20231216070413.233668-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Mana uses PAGE_POOL API. x86_64 defconfig doesn't select it:
ld: vmlinux.o: in function `mana_create_page_pool.isra.0':
mana_en.c:(.text+0x9ae36f): undefined reference to `page_pool_create'
ld: vmlinux.o: in function `mana_get_rxfrag':
mana_en.c:(.text+0x9afed1): undefined reference to `page_pool_alloc_pages'
make[3]: *** [/home/yury/work/linux/scripts/Makefile.vmlinux:37: vmlinux] Error 1
make[2]: *** [/home/yury/work/linux/Makefile:1154: vmlinux] Error 2
make[1]: *** [/home/yury/work/linux/Makefile:234: __sub-make] Error 2
make[1]: Leaving directory '/home/yury/work/build-linux-x86_64'
make: *** [Makefile:234: __sub-make] Error 2
So we need to select it explicitly.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter")
Link: https://lore.kernel.org/r/20231215203353.635379-1-yury.norov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a bug in the ks8851 Ethernet driver that more data is written
to the hardware TX buffer than actually available. This is caused by
wrong accounting of the free TX buffer space.
The driver maintains a tx_space variable that represents the TX buffer
space that is deemed to be free. The ks8851_start_xmit_spi() function
adds an SKB to a queue if tx_space is large enough and reduces tx_space
by the amount of buffer space it will later need in the TX buffer and
then schedules a work item. If there is not enough space then the TX
queue is stopped.
The worker function ks8851_tx_work() dequeues all the SKBs and writes
the data into the hardware TX buffer. The last packet will trigger an
interrupt after it was send. Here it is assumed that all data fits into
the TX buffer.
In the interrupt routine (which runs asynchronously because it is a
threaded interrupt) tx_space is updated with the current value from the
hardware. Also the TX queue is woken up again.
Now it could happen that after data was sent to the hardware and before
handling the TX interrupt new data is queued in ks8851_start_xmit_spi()
when the TX buffer space had still some space left. When the interrupt
is actually handled tx_space is updated from the hardware but now we
already have new SKBs queued that have not been written to the hardware
TX buffer yet. Since tx_space has been overwritten by the value from the
hardware the space is not accounted for.
Now we have more data queued then buffer space available in the hardware
and ks8851_tx_work() will potentially overrun the hardware TX buffer. In
many cases it will still work because often the buffer is written out
fast enough so that no overrun occurs but for example if the peer
throttles us via flow control then an overrun may happen.
This can be fixed in different ways. The most simple way would be to set
tx_space to 0 before writing data to the hardware TX buffer preventing
the queuing of more SKBs until the TX interrupt has been handled. I have
chosen a slightly more efficient (and still rather simple) way and
track the amount of data that is already queued and not yet written to
the hardware. When new SKBs are to be queued the already queued amount
of data is honoured when checking free TX buffer space.
I tested this with a setup of two linked KS8851 running iperf3 between
the two in bidirectional mode. Before the fix I got a stall after some
minutes. With the fix I saw now issues anymore after hours.
Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To synchronize the timestamps with the ring buffer reservation, there are
two timestamps that are saved in the buffer meta data.
1. before_stamp
2. write_stamp
When the two are equal, the write_stamp is considered valid, as in, it may
be used to calculate the delta of the next event as the write_stamp is the
timestamp of the previous reserved event on the buffer.
This is done by the following:
/*A*/ w = current position on the ring buffer
before = before_stamp
after = write_stamp
ts = read current timestamp
if (before != after) {
write_stamp is not valid, force adding an absolute
timestamp.
}
/*B*/ before_stamp = ts
/*C*/ write = local_add_return(event length, position on ring buffer)
if (w == write - event length) {
/* Nothing interrupted between A and C */
/*E*/ write_stamp = ts;
delta = ts - after
/*
* If nothing interrupted again,
* before_stamp == write_stamp and write_stamp
* can be used to calculate the delta for
* events that come in after this one.
*/
} else {
/*
* The slow path!
* Was interrupted between A and C.
*/
This is the place that there's a bug. We currently have:
after = write_stamp
ts = read current timestamp
/*F*/ if (write == current position on the ring buffer &&
after < ts && cmpxchg(write_stamp, after, ts)) {
delta = ts - after;
} else {
delta = 0;
}
The assumption is that if the current position on the ring buffer hasn't
moved between C and F, then it also was not interrupted, and that the last
event written has a timestamp that matches the write_stamp. That is the
write_stamp is valid.
But this may not be the case:
If a task context event was interrupted by softirq between B and C.
And the softirq wrote an event that got interrupted by a hard irq between
C and E.
and the hard irq wrote an event (does not need to be interrupted)
We have:
/*B*/ before_stamp = ts of normal context
---> interrupted by softirq
/*B*/ before_stamp = ts of softirq context
---> interrupted by hardirq
/*B*/ before_stamp = ts of hard irq context
/*E*/ write_stamp = ts of hard irq context
/* matches and write_stamp valid */
<----
/*E*/ write_stamp = ts of softirq context
/* No longer matches before_stamp, write_stamp is not valid! */
<---
w != write - length, go to slow path
// Right now the order of events in the ring buffer is:
//
// |-- softirq event --|-- hard irq event --|-- normal context event --|
//
after = write_stamp (this is the ts of softirq)
ts = read current timestamp
if (write == current position on the ring buffer [true] &&
after < ts [true] && cmpxchg(write_stamp, after, ts) [true]) {
delta = ts - after [Wrong!]
The delta is to be between the hard irq event and the normal context
event, but the above logic made the delta between the softirq event and
the normal context event, where the hard irq event is between the two. This
will shift all the remaining event timestamps on the sub-buffer
incorrectly.
The write_stamp is only valid if it matches the before_stamp. The cmpxchg
does nothing to help this.
Instead, the following logic can be done to fix this:
before = before_stamp
ts = read current timestamp
before_stamp = ts
after = write_stamp
if (write == current position on the ring buffer &&
after == before && after < ts) {
delta = ts - after
} else {
delta = 0;
}
The above will only use the write_stamp if it still matches before_stamp
and was tested to not have changed since C.
As a bonus, with this logic we do not need any 64-bit cmpxchg() at all!
This means the 32-bit rb_time_t workaround can finally be removed. But
that's for a later time.
Link: https://lore.kernel.org/linux-trace-kernel/20231218175229.58ec3daf@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20231218230712.3a76b081@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: dd93942570789 ("ring-buffer: Do not try to put back write_stamp")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for division by zero in Nintendo driver when generic joycon is
attached, reported and fixed by SteamOS folks (Guilherme G. Piccoli)
- GCC-7 build fix (which is a good cleanup anyway) for Nintendo driver
(Ryan McClelland)
* tag 'hid-for-linus-2023121901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: nintendo: Prevent divide-by-zero on code
HID: nintendo: fix initializer element is not constant error
|
|
Guillaume says:
> I believe commit 5f7fc5d69f6e ("SUNRPC: Resupply rq_pages from
> node-local memory") in Linux 6.5+ is incorrect. It passes
> unconditionally rq_pool->sp_id as the NUMA node.
>
> While the comment in the svc_pool declaration in sunrpc/svc.h says
> that sp_id is also the NUMA node id, it might not be the case if
> the svc is created using svc_create_pooled(). svc_created_pooled()
> can use the per-cpu pool mode therefore in this case sp_id would
> be the cpu id.
Fix this by reverting now. At a later point this minor optimization,
and the deceptive labeling of the sp_id field, can be revisited.
Reported-by: Guillaume Morin <guillaume@morinfr.org>
Closes: https://lore.kernel.org/linux-nfs/ZYC9rsno8qYggVt9@bender.morinfr.org/T/#u
Fixes: 5f7fc5d69f6e ("SUNRPC: Resupply rq_pages from node-local memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It was reported [0] that adding a generic joycon to the system caused
a kernel crash on Steam Deck, with the below panic spew:
divide error: 0000 [#1] PREEMPT SMP NOPTI
[...]
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0119 10/24/2023
RIP: 0010:nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
[...]
Call Trace:
[...]
? exc_divide_error+0x38/0x50
? nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
? asm_exc_divide_error+0x1a/0x20
? nintendo_hid_event+0x307/0xcc1 [hid_nintendo]
hid_input_report+0x143/0x160
hidp_session_run+0x1ce/0x700 [hidp]
Since it's a divide-by-0 error, by tracking the code for potential
denominator issues, we've spotted 2 places in which this could happen;
so let's guard against the possibility and log in the kernel if the
condition happens. This is specially useful since some data that
fills some denominators are read from the joycon HW in some cases,
increasing the potential for flaws.
[0] https://github.com/ValveSoftware/SteamOS/issues/1070
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Tested-by: Sam Lantinga <slouken@libsdl.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two medium sized fixes, both in drivers.
The UFS one adds parsing of clock info structures, which is required
by some host drivers and the aacraid one reverts the IRQ affinity
mapping patch which has been causing regressions noted in kernel
bugzilla 217599"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Store min and max clk freq from OPP table
Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few bigger things here, the main one being that there were changes
to the atmel driver in this cycle which made it possible to kill
transfers being used for filesystem I/O which turned out to be very
disruptive, the series of patches here undoes that and hardens things
up further.
There's also a few smaller driver specific changes, the main one being
to revert a change that duplicted delays"
* tag 'spi-fix-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel: Fix clock issue when using devices with different polarities
spi: spi-imx: correctly configure burst length when using dma
spi: cadence: revert "Add SPI transfer delays"
spi: atmel: Prevent spi transfers from being killed
spi: atmel: Drop unused defines
spi: atmel: Do not cancel a transfer upon any signal
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
__bio_for_each_segment assumes that the first struct bio_vec argument
doesn't change - it calls "bio_advance_iter_single((bio), &(iter),
(bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity
code changes the bio_vec with "bv.bv_len -= pos". When this code path
is taken, the iterator would be out of sync and dm-integrity would
report errors. This happens if the machine is out of memory and
"kmalloc" fails.
Fix this bug by making a copy of "bv" and changing the copy instead.
Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
After commit db5e653d7c9f ("md: delay choosing sync action to
md_start_sync()"), md_start_sync() will hold 'reconfig_mutex', however,
in order to make sure event_work is done, __md_stop() will flush
workqueue with reconfig_mutex grabbed, hence if sync_work is still
pending, deadlock will be triggered.
Fortunately, former pacthes to fix stopping sync_thread already make sure
all sync_work is done already, hence such deadlock is not possible
anymore. However, in order not to cause confusions for people by this
implicit dependency, delay flushing event_work to dm-raid where
'reconfig_mutex' is not held, and add some comments to emphasize that
the workqueue can't be flushed with 'reconfig_mutex'.
Fixes: db5e653d7c9f ("md: delay choosing sync action to md_start_sync()")
Depends-on: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 6624e780a577fc596788 ("ice: split ice_vsi_setup into smaller
functions") has refactored a bunch of code involved in PFR. In this
process, TC queue number adjustment for XDP was lost. Bring it back.
Lack of such adjustment causes interface to go into no-carrier after a
reset, if XDP program is attached, with the following message:
ice 0000:b1:00.0: Failed to set LAN Tx queue context, error: -22
ice 0000:b1:00.0 ens801f0np0: Failed to open VSI 0x0006 on switch 0x0001
ice 0000:b1:00.0: enable VSI failed, err -22, VSI index 0, type ICE_VSI_PF
ice 0000:b1:00.0: PF VSI rebuild failed: -22
ice 0000:b1:00.0: Rebuild failed, unload and reload driver
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously, the ice driver had support for using a handler for bonding
netdev events to ensure that conflicting features were not allowed to be
activated at the same time. While this was still in place, additional
support was added to specifically support SRIOV and LAG together. These
both utilized the netdev event handler, but the SRIOV and LAG feature was
behind a capabilities feature check to make sure the current NVM has
support.
The exclusion part of the event handler should be removed since there are
users who have custom made solutions that depend on the non-exclusion of
features.
Wrap the creation/registration and cleanup of the event handler and
associated structs in the probe flow with a feature check so that the
only systems that support the full implementation of LAG features will
initialize support. This will leave other systems unhindered with
functionality as it existed before any LAG code was added.
Fixes: bb52f42acef6 ("ice: Add driver support for firmware changes for LAG")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|