| Age | Commit message (Collapse) | Author |
|---|
|
It has been found that the (non-vendor issued) ACPI ID for Lite-On
LTR303 is present in Microsoft catalog. Add it to the list of the
supported devices.
Link: https://www.catalog.update.microsoft.com/Search.aspx?q=lter0303
Closes: https://lore.kernel.org/r/9cdda3e0-d56e-466f-911f-96ffd6f602c8@redhat.com
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-24-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The commits in question do not proove that ACPI IDs exist.
Quite likely it was a cargo cult addition while doing that
for DT-based enumeration. Drop most likely fake ACPI IDs.
The to be removed IDs has been checked against the following resources:
1) DuckDuckGo
2) Google
3) MS catalog: https://www.catalog.update.microsoft.com/Search.aspx
This gives no useful results in regard to DSDT, moreover, the official
vendor ID in the registry for Lite-On is LCI.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-23-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong. Also drop now unneeded linux/acpi.h include and
added linux/mod_devicetable.h for struct acpi_device_id definition.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-22-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
IIO core (ACPI part) provides a generic helper that may be used in
the driver. Replace a variant of iio_get_acpi_device_name_and_data().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-21-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
IIO core (ACPI part) provides a generic helper that may be used in
the driver. Replace custom implementation of iio_get_acpi_device_name().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-20-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
IIO core (ACPI part) provides a generic helper that may be used in
the driver. Replace custom implementation of iio_get_acpi_device_name().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-19-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
IIO core (ACPI part) provides a generic helper that may be used in
the driver. Replace custom implementation of iio_get_acpi_device_name().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-18-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong. Also added linux/mod_devicetable.h for
struct acpi_device_id definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-17-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
IIO core (ACPI part) provides a generic helper that may be used in
the driver. Replace a variant of iio_get_acpi_device_name_and_data().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of using enum, out of which only a couple of values
are being actually used, make a comparisons against pointer
to the respective chip_info structures.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert odr_start_up_times array to the variable in chip_info.
Tweak whitespace for readablity whilst here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move odr_start_up_times up in the code in a preparation of
the further cleaning up changes.
While at it, make it clear what values from enum are being used for
the respective array entries.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of having a enum and keeping IDs as driver data pointers,
just have a chip_info struct per supported device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rename kxcjk1013_info to kxcjk1013_iio_info in preparatory of
further cleaning up changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use local variable for regs in preparatory of further cleaning up changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The mentioned change effectively broke the ODR startup timeouts
settungs for KX023-1025 case. Let's revert it for now and see
how we can handle it with the better approach after switching
the driver to use data structure instead of enum.
This reverts commit d5cbe1502043124ff8af8136b80f93758c4a61e0.
Fixes: d5cbe1502043 ("iio: accel: kxcjk-1013: Add support for KX022-1020")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ACPI IDs are defined in the respective ID tables. Puting them
to the I²C ID legacy table has no meaning. Remove that ID.
Fixes: 3bfa74f86006 ("iio:kxcjk-1013: Add support for SMO8500 device")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A few drivers duplicate the code to retrieve ACPI device instance name.
Some of them want an associated driver data as well.
In order of deduplication introduce the common helper functions.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
By using ACPI_HANDLE() the handler argument can be retrieved directly.
Replace ACPI_COMPANION() + dereference with ACPI_HANDLE().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When device is enumerated via ACPI the respective device node is of
ACPI device type. Use that to check for ACPI enumeration, rather than
calling for full match which is O(n) vs. O(1) for the regular check.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When device is enumerated via ACPI the respective device node is of
ACPI device type. Use that to check for ACPI enumeration, rather than
calling for full match which is O(n) vs. O(1) for the regular check.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since there is no ACPI IDs for this driver to be served for,
drop dead ACPI bits from it completely.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD7607, AD7608 and AD7609 are some older parts of the AD7606 family.
They are hardware-only, meaning that they don't have any registers
accessible via SPI or Parallel interface.
They are more similar to the AD7605-4 part, which is supported by the
'ad7606' driver, and are configurable via GPIOs.
Like the AD7605-4 part, all 3 parts have 2 CONVST (Conversion Start) pins
(CONVST A and CONVST B). But in practice, these should be tied together to
make reading of samples easier via a serial line.
The AD7607 has an 14-bit resolution and AD7608 & AD7609 have an 18-bit
resolution. The main difference between the AD7608 & AD7609 is that the
AD7609 has a larger range (±10V & ±20V) vs the ±5V & ±10V ranges for AD7608.
However, unlike AD7605-4 part, these 3 parts have oversampling which is
configurable (like for the AD7606 in HW-mode) via GPIOs.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7607.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7608.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7609.pdf
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-6-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change adds the AD7607, AD7608 & AD7609 parts to the binding doc of
the ad7606 driver.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-5-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The main driver for this change is the AD7607 part, which has a scale of
"1.220703" for the ±10V range. The AD7607 has a resolution of 14-bits.
So, just adding the scale-available list for that part would require some
quirks to handle just that scale value.
But to do it more neatly, the best approach is to rework the scale
available lists to have the same format as it is returned to userspace.
That way, we can also get rid of the allocation for the 'scale_avail_show'
array.
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-4-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currently the 'ad7606' driver supports parts with 18 and 16 bits
resolutions.
But when adding support for AD7607 (which has a 14-bit resolution) we
should check for the 'realbits' field, to be able to sign-extend correctly.
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-3-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When the mutexes were reworked to guards, the caching of the
oversampling_ratio values was removed by accident.
The main effect of this change is that, after setting the
oversampling_ratio value, reading it back would result in the initial value
(of 1).
The value would get sent to the device correctly though.
Fixes 2956979dbd0d: ("iio: adc: ad7606: switch mutexes to guard")
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-2-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Prepare the bmi270 driver to support similar devices like the bmi260.
Signed-off-by: Justin Weiss <justin@justinweiss.com>
Link: https://patch.msgid.link/20241020220011.212395-3-justin@justinweiss.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
These attributes are not currently wired up, and will always return
EINVAL.
Fixes: 3ea51548d6b2 ("iio: imu: Add i2c driver for bmi270 imu")
Signed-off-by: Justin Weiss <justin@justinweiss.com>
Link: https://patch.msgid.link/20241020220011.212395-2-justin@justinweiss.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linus already once did that for PDx86, don't repeat our mistakes.
TL;DR: 'n' *is* the default 'default'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241022143600.3314241-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linus already once did that for PDx86, don't repeat our mistakes.
TL;DR: 'n' *is* the default 'default'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241022143605.3314275-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
e4ca0e59c394 ("types: Complement the aligned types with signed 64-bit one")
introduced aligned_s64. Use it for all IIO accelerometer drivers.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241020180720.496327-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
TI's opt3002 light sensor shares most properties with the opt3001
model, with the exception of supporting a wider spectrum range.
Add support for TI's opt3002 by extending the TI opt3001 driver.
Datasheet: https://www.ti.com/product/OPT3002
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Link: https://patch.msgid.link/20241003-add_opt3002-v4-2-c550dc4591b4@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The opt3002 is a Light-to-Digital Sensor by TI with support for wide-range
spectrum light. It shares most properties with their opt3001 model with
the exception of having a wide spectral bandwidth, ranging from 300 nm
to 1000 nm.
Add the compatible string of opt3002.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Link: https://patch.msgid.link/20241003-add_opt3002-v4-1-c550dc4591b4@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for AD7770, AD7771, AD7779 ADCs. The device is capable of
sending out data both on DOUT lines interface,as on the SDO line.
The driver currently implements only the SDO data streaming mode. SPI
communication is used alternatively for accessing registers and streaming
data. Register accesses are protected by crc8.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Link: https://patch.msgid.link/20241014143204.30195-4-ramona.nechita@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The filter mode / filter type property is used for ad4130
and ad7779 drivers, therefore the ABI doc file for ad4130
was removed, merging both of them in the sysfs-bus-iio.
Since one of the drivers is available from 6.1, the version
has been set to 6.1 for these attributes.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20241014143204.30195-3-ramona.nechita@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add dt bindings for AD7779 8-channel, simultaneous sampling ADC
family with eight full Σ-Δ ADCs on chip and ultra-low input
current to allow direct sensor connection.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241014143204.30195-2-ramona.nechita@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since the pwm was introduced before backend, there was a mock use, with
a GPIO emulation. Now that iio backend is introduced, the mock use can
be removed.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-8-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
- Basic support for iio backend.
- Supports IIO_CHAN_INFO_SAMP_FREQ R/W.
- Only hardware mode is available, and that IIO_CHAN_INFO_RAW is not
supported if iio-backend mode is selected.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-7-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This variable determines how many hardware channels has the chip,
oppositely to the num_channels that can contain more channels, e.g a
timestamp channel in our case. Introducing this variable avoids
decreasing the former num_channels variable when reading the ADC's
channels, and clarifies a bit the code.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-6-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
On the parallel version, the current implementation is only compatible
with id tables and won't work with fw_nodes, this commit intends to fix
it.
Doing so required to declare ad7606_chip_info structures in the .h file
so to make them accessible to all the driver files that can set a
pointer to the corresponding chip as the driver data.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-5-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Until now, the conversion were triggered by setting high the GPIO
connected to the convst pin. This commit gives the possibility to
connect the convst pin to a PWM.
Connecting a PWM allows to have a better control on the samplerate,
but it must be handled with care, as it is completely decorrelated of
the driver's busy pin handling.
Hence it is not recommended to be used "as is" but must be exploited
in conjunction with IIO backend, and for now only a mock functionality
is enabled, i.e PWM never swings, but is used as a GPIO, i.e duty_cycle
== period equals high state, duty_cycle == 0 equals low state.
This mock functionality will be disabled after the IIO backend usecase
is introduced.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-4-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Analog Devices Inc. AD7606 (and similar chips) are complex ADCs that
will benefit from a detailed driver documentation.
This documents the current features supported by the driver.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-3-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the required properties for iio-backend support, as well as an
example and the conditions to mutually exclude interruption and
conversion trigger with iio-backend.
The iio-backend's function is to controls the communication, and thus the
interruption pin won't be available anymore.
As a consequence, the conversion pin must be controlled externally since
we will miss information about when every single conversion cycle (i.e
conversion + data transfer) ends, hence a PWM is introduced to trigger
the conversions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-2-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The documentation is erroneously stating that spi-cpha is required, and
the example is erroneously setting both spi-cpol and spi-cpha. According
to the datasheet, only cpol should be set.
On zedboard for instance, setting the devicetree as in the example will
simply not work.
Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Fixes: 6e33a125df66 ("dt-bindings: iio: adc: Add docs for AD7606 ADC")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-1-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Make use of mutex guard() and IIO iio_device_claim_direct_scoped() to
simplify code and error handling.
While at it, use devm_mutex_init() to initialize the mutex.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-3-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
It's highly unlikely for the converter ref voltage to change at runtime.
Hence, let's read the voltage and save it (instead of the regulator
struct). While at it, simplify the code by using
devm_regulator_get_enable_read_voltage().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-2-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We just need the reset gpio during probe so there's no need to keep it
in our state struct. Hence, move devm_gpiod_get_optional() into
ad74413r_reset() and use a local struct gpio_desc.
While at it, request the gpio in the asserted state (GPIOD_OUT_HIGH) so
that we already perform the reset while requesting the gpio saving us a
call to gpiod_set_value_cansleep().
Also, explicitly include <gpio/consumer.h> for
devm_gpiod_get_optional().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-1-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Define the integration time within the configuration register as a field
to easy its handling as an index, preparing the driver to support
configurable integration times.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241017-veml6070-integration-time-v1-2-3507d17d562a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
