| Age | Commit message (Collapse) | Author |
|---|
|
dma_supported has become too much spaghetti for my taste. Reflow it to
remove the duplicate use_dma_iommu condition and make the main path more
obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
|
|
If the DMA IOMMU path is going to be used, the appropriate check should
return that DMA is supported.
Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu")
Closes: https://lore.kernel.org/all/181e06ff-35a3-434f-b505-672f430bd1cb@notapiano
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> #KernelCI
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When debugging drivers, it can often be useful to trace when memory gets
(un)mapped for DMA (and can be accessed by the device). Add some
tracepoints for this purpose.
Use u64 instead of phys_addr_t and dma_addr_t (and similarly %llx instead
of %pa) because libtraceevent can't handle typedefs in all cases.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Common alloca and free pages routines are called when IOMMU DMA is used,
and internally it calls to DMA ops structure which is not available for
default IOMMU. This patch adds necessary if checks to call IOMMU DMA.
It fixes the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000d20bb000
[0000000000000040] pgd=08000000d20c1003
, p4d=08000000d20c1003
, pud=08000000d20c2003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in: ipv6 hci_uart venus_core btqca
v4l2_mem2mem btrtl qcom_spmi_adc5 sbs_battery btbcm qcom_vadc_common
cros_ec_typec videobuf2_v4l2 leds_cros_ec cros_kbd_led_backlight
cros_ec_chardev videodev elan_i2c
videobuf2_common qcom_stats mc bluetooth coresight_stm stm_core
ecdh_generic ecc pwrseq_core panel_edp icc_bwmon ath10k_snoc ath10k_core
ath mac80211 phy_qcom_qmp_combo aux_bridge libarc4 coresight_replicator
coresight_etm4x coresight_tmc
coresight_funnel cfg80211 rfkill coresight qcom_wdt cbmem ramoops
reed_solomon pwm_bl coreboot_table backlight crct10dif_ce
CPU: 7 UID: 0 PID: 70 Comm: kworker/u32:4 Not tainted 6.11.0-rc6-next-20240903-00003-gdfc6015d0711 #660
Hardware name: Google Lazor Limozeen without Touchscreen (rev5 - rev8) (DT)
Workqueue: events_unbound deferred_probe_work_func
hub 2-1:1.0: 4 ports detected
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dma_common_alloc_pages+0x54/0x1b4
lr : dma_common_alloc_pages+0x4c/0x1b4
sp : ffff8000807d3730
x29: ffff8000807d3730 x28: ffff02a7d312f880 x27: 0000000000000001
x26: 000000000000c000 x25: 0000000000000000 x24: 0000000000000001
x23: ffff02a7d23b6898 x22: 0000000000006cc0 x21: 000000000000c000
x20: ffff02a7858bf410 x19: fffffe0a60006000 x18: 0000000000000001
x17: 00000000000000d5 x16: 1fffe054f0bcc261 x15: 0000000000000001
x14: ffff02a7844dc680 x13: 0000000000100180 x12: dead000000000100
x11: dead000000000122 x10: 00000000001001ff x9 : ffff02a87f7b7b00
x8 : ffff02a87f7b7b00 x7 : ffff405977d6b000 x6 : ffff8000807d3310
x5 : ffff02a87f6b6398 x4 : 0000000000000001 x3 : ffff405977d6b000
x2 : ffff02a7844dc600 x1 : 0000000100000000 x0 : fffffe0a60006000
Call trace:
dma_common_alloc_pages+0x54/0x1b4
__dma_alloc_pages+0x68/0x90
dma_alloc_pages+0x10/0x1c
snd_dma_noncoherent_alloc+0x28/0x8c
__snd_dma_alloc_pages+0x30/0x50
snd_dma_alloc_dir_pages+0x40/0x80
do_alloc_pages+0xb8/0x13c
preallocate_pcm_pages+0x6c/0xf8
preallocate_pages+0x160/0x1a4
snd_pcm_set_managed_buffer_all+0x64/0xb0
lpass_platform_pcm_new+0xc0/0xe8
snd_soc_pcm_component_new+0x3c/0xc8
soc_new_pcm+0x4fc/0x668
snd_soc_bind_card+0xabc/0xbac
snd_soc_register_card+0xf0/0x108
devm_snd_soc_register_card+0x4c/0xa4
sc7180_snd_platform_probe+0x180/0x224
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x15c
__device_attach_driver+0xb8/0x134
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x88/0xc0
process_one_work+0x14c/0x28c
worker_thread+0x2cc/0x3d4
kthread+0x114/0x118
ret_from_fork+0x10/0x20
Code: f9411c19 940000c9 aa0003f3 b4000460 (f9402326)
---[ end trace 0000000000000000 ]---
Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu")
Closes: https://lore.kernel.org/all/10431dfd-ce04-4e0f-973b-c78477303c18@notapiano
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> #KernelCI
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When the CMA allocation succeeds but isn't addressable, its buffer has
already been released and the page is set to NULL. So later when the
normal page allocation succeeds but isn't addressable, __free_pages()
can be used to free that normal page rather than using
dma_free_contiguous that does extra checks that are not needed.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
|
|
vdpa_sim has been fixed to not override the dma_map_ops in commit
6c3d329e6486 ("vdpa_sim: get rid of DMA ops"), so don't select the
symbol and don't depend on HAS_DMA.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Commit ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by
zone_dma_limit") optimistically assumed that device-tree dma-ranges
property describes the system DMA limits. That assumption ignores DMA
limits of individual devices that are not encoded in device tree.
Commit 833bd284a45 ("arm64: mm: fix DMA zone when dma-ranges is
missing") fixed part of the problem for platforms that do not provide
dma-ranges at all. However platforms like SM8550-HDK provide DMA bus
limit, but have devices with stronger DMA limits.
of_dma_get_max_cpu_address() does not take device limitations into
account.
These platforms implicitly rely on DMA zone in low 32-bit RAM area.
Until we find a better way to figure out the optimal DMA zone range,
restore the low RAM DMA zone we had before commit ba0fb44aed47.
Fixes: ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by zone_dma_limit")
Closes: https://lore.kernel.org/r/1a0c7282-63e0-4add-8e38-3abe3e0a8e2f@linaro.org
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We'll start throwing warnings soon when dma_set_seg_boundary and
dma_set_max_seg_size are called on devices for buses that don't fully
support the DMA API. Prepare for that by making the calls in the SCSI
midlayer conditional.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some platforms, like Rockchip RK3568 based Odroid M1, do not provide DMA
limits information in device-tree dma-ranges property. Still some device
drivers set DMA limit that relies on DMA zone at low 4GB memory area.
Until commit ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by
zone_dma_limit"), zone_sizes_init() restricted DMA zone to low 32-bit.
Restore DMA zone 32-bit limit when the platform provides no DMA bus
limit information.
Fixes: ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by zone_dma_limit")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/53d988b1-bdce-422a-ae4e-158f305ad703@samsung.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Directly call into dma-iommu just like we have been doing for dma-direct
for a while. This avoids the indirect call overhead for IOMMU ops and
removes the need to have DMA ops entirely for many common configurations.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Almost all instances of the dma_map_ops ->map_page()/map_sg() methods
implement ->unmap_page()/unmap_sg() too. The once instance which doesn't
dma_dummy_ops which is used to fail the DMA mapping and thus there won't
be any calls to ->unmap_page()/unmap_sg().
Remove the checks for ->unmap_page()/unmap_sg() and call them directly to
create an interface that is symmetrical to ->map_page()/map_sg().
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 791ab8b2e3db ("arm64: Ignore any DMA offsets in the
max_zone_phys() calculation") made arm64 DMA/DMA32 zones span the entire
RAM when RAM starts above 32-bits. This breaks hardware with DMA area
that start above 32-bits. But the commit log says that "we haven't
noticed any such hardware". It turns out that such hardware does exist.
One such platform has RAM starting at 32GB with an internal bus that has
the following DMA limits:
#address-cells = <2>;
#size-cells = <2>;
dma-ranges = <0x00 0xc0000000 0x08 0x00000000 0x00 0x40000000>;
That is, devices under this bus see 1GB of DMA range between 3GB-4GB in
their address space. This range is mapped to CPU memory at 32GB-33GB.
With current code DMA allocations for devices under this bus are not
limited to DMA area, leading to run-time allocation failure.
This commit reinstates DMA zone at the bottom of RAM. The result is DMA
zone that properly reflects the hardware constraints as follows:
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000800000000-0x000000083fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000840000000-0x0000000bffffffff]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[baruch: split off the original patch]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The hardware DMA limit might not be power of 2. When RAM range starts
above 0, say 4GB, DMA limit of 30 bits should end at 5GB. A single high
bit can not encode this limit.
Use a plain address for the DMA zone limit instead.
Since the DMA zone can now potentially span beyond 4GB physical limit of
DMA32, make sure to use DMA zone for GFP_DMA32 allocations in that case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In dma_common_find_pages(), area->flags are compared directly with
VM_DMA_COHERENT. This works because VM_DMA_COHERENT is the only set
flag.
During development of a new feature (ASI [1]), a new VM flag is
introduced, and that flag can be injected into VM_DMA_COHERENT mappings
(among others). The presence of that flag caused
dma_common_find_pages() to return NULL for VM_DMA_COHERENT addresses,
leading to a lot of problems ending in crashing during boot. It took a
bit of time to figure this problem out.
It was a mistake to inject a VM flag to begin with, but it took a
significant amount of debugging to figure out the problem. Most users of
area->flags use bitmasking rather than equivalency to check for flags.
Update dma_common_find_pages() and dma_common_free_remap() to do the
same, which would have avoided the boot crashing. Instead, add a warning
in dma_common_find_pages() if any extra VM flags are set to catch such
problems more easily during development.
No functional change intended.
[1]https://lore.kernel.org/lkml/20240712-asi-rfc-24-v1-0-144b319a40d8@google.com/
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
|
|
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
|
|
Pull smb client fixes from Steve French:
- fix for clang warning - additional null check
- fix for cached write with posix locks
- flexible structure fix
* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: smb2pdu.h: Use static_assert() to check struct sizes
smb3: fix lock breakage for cached writes
smb/client: avoid possible NULL dereference in cifs_free_subrequest()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()
For host drivers, there are two fixes:
- Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
- Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the previous
release"
* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Do not mark ACPI devices as irq safe
i2c: Use IS_REACHABLE() for substituting empty ACPI functions
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes to the mpi3mr driver. One to avoid oversize
allocations in tracing and the other to fix an uninitialized spinlock
in the user to driver feature request code (used to trigger dumps and
the like)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock
|
|
Pull xfs fixes from Chandan Babu:
- Check for presence of only 'attr' feature before scrubbing an inode's
attribute fork.
- Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
long (i.e. 50ms) sleep durations to prevent high load averages.
- Do not allow users to change the realtime flag of a file unless the
datadev and rtdev both support fsdax access modes.
* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
xfs: revert AIL TASK_KILLABLE threshold
xfs: attr forks require attr, not attr2
|
|
Pull bcachefs fixes from Kent OverstreetL
- New on disk format version, bcachefs_metadata_version_disk_accounting_inum
This adds one more disk accounting counter, which counts disk usage
and number of extents per inode number. This lets us track
fragmentation, for implementing defragmentation later, and it also
counts disk usage per inode in all snapshots, which will be a useful
thing to expose to users.
- One performance issue we've observed is threads spinning when they
should be waiting for dirty keys in the key cache to be flushed by
journal reclaim, so we now have hysteresis for the waiting thread, as
well as improving the tracepoint and a new time_stat, for tracking
time blocked waiting on key cache flushing.
... and various assorted smaller fixes.
* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
bcachefs: fix incorrect i_state usage
bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
bcachefs: Fix forgetting to pass trans to fsck_err()
bcachefs: Increase size of cuckoo hash table on too many rehashes
bcachefs: bcachefs_metadata_version_disk_accounting_inum
bcachefs: Kill __bch2_accounting_mem_mod()
bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
bcachefs: Add a time_stat for blocked on key cache flush
bcachefs: Improve trans_blocked_journal_reclaim tracepoint
bcachefs: Add hysteresis to waiting on btree key cache flush
lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
bcachefs: Convert for_each_btree_node() to lockrestart_do()
bcachefs: Add missing downgrade table entry
bcachefs: disk accounting: ignore unknown types
bcachefs: bch2_accounting_invalid() fixup
bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()
|
|
We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull memcg-v1 fix from Al Viro:
"memcg_write_event_control() oops fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
memcg_write_event_control(): fix a user-triggerable oops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
macro instead of the *_ERR() one in order to avoid writing -EFAULT to
the value register in case of a fault
- Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
Prior to this fix, only the first element was initialised
- Move the KASAN random tag seed initialisation after the per-CPU areas
have been initialised (prng_state is __percpu)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix KASAN random tag seed initialization
arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
arm64: uaccess: correct thinko in __get_mem_asm()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the new T-Head TH1520 clk driver that marks a bus clk
critical so that it isn't turned off during late init which breaks
emmc-sdio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: thead: fix dependency on clk_ignore_unused
|
|
Pull block fixes from Jens Axboe:
- Fix corruption issues with s390/dasd (Eric, Stefan)
- Fix a misuse of non irq locking grab of a lock (Li)
- MD pull request with a single data corruption fix for raid1 (Yu)
* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
block: Fix lockdep warning in blk_mq_mark_tag_wait
md/raid1: Fix data corruption for degraded array with slow disk
s390/dasd: fix error recovery leading to data corruption on ESE devices
s390/dasd: Remove DMA alignment
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a comment in the uapi header using the wrong member name (Caleb)
- Fix KCSAN warning for a debug check in sqpoll (me)
- Two more NAPI tweaks (Olivier)
* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
io_uring: fix user_data field name in comment
io_uring/sqpoll: annotate debug task == current with data_race()
io_uring/napi: remove duplicate io_napi_entry timeout assignation
io_uring/napi: check napi_enabled in io_napi_add() before proceeding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a possible (but unlikely) out-of-bounds read in interrupts
parsing code
- Add AT25 EEPROM "fujitsu,mb85rs256" compatible
- Update Konrad Dybcio's email
* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
dt-bindings: Batch-update Konrad Dybcio's email
|
|
Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.
So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.
Link: https://lore.kernel.org/linux-btrfs/3df4acd616a07ef4d2dc6bad668701504b412ffc.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/c30fd6b3-ca7a-4759-8a53-d42878bf84f7@gmail.com/
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a Bang-bang thermal governor issue causing it to fail to reset the
state of cooling devices if they are 'on' to start with, but the
thermal zone temperature is always below the corresponding trip point
(Rafael Wysocki)"
* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_bang_bang: Use governor_data to reduce overhead
thermal: gov_bang_bang: Add .manage() callback
thermal: gov_bang_bang: Split bang_bang_control()
thermal: gov_bang_bang: Call __thermal_cdev_update() directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an issue related to the ACPI EC device handling that causes the
_REG control method to be evaluated for EC operation regions that are
not expected to be used.
This confuses the platform firmware and provokes various types of
misbehavior on some systems (Rafael Wysocki)"
* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate _REG outside the EC scope more carefully
ACPICA: Add a depth argument to acpi_execute_reg_methods()
Revert "ACPI: EC: Evaluate orphan _REG under EC device"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Ira Weiny:
"Commit f467fee48da4 ("block: move the dax flag to queue_limits") broke
the DAX tests by skipping over the legacy pmem mapping pages case.
Set the DAX flag in this case as well"
* tag 'libnvdimm-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: Set dax flag for all 'PFN_MAP' cases
|
|
io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull rust fixes from Miguel Ojeda:
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
rust: x86: remove `-3dnow{,a}` from target features
kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
rust: add intrinsics to fix `-Os` builds
kbuild: rust: skip -fmin-function-alignment in bindgen flags
rust: Support latest version of `rust-analyzer`
rust: macros: indent list item in `module!`'s docs
rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- reintroduce the text patching global icache flush
- fix syscall entry code to correctly initialize a0, which manifested
as a strace bug
- XIP kernels now map the entire kernel, which fixes boot under at
least DEBUG_VIRTUAL=y
- initialize all nodes in the acpi_early_node_map initializer
- fix OOB access in the Andes vendor extension probing code
- A new key for scalar misaligned access performance in hwprobe, which
correctly treat the values as an enum (as opposed to a bitmap)
* tag 'riscv-for-linus-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix out-of-bounds when accessing Andes per hart vendor extension array
RISC-V: hwprobe: Add SCALAR to misaligned perf defines
RISC-V: hwprobe: Add MISALIGNED_PERF key
RISC-V: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: change XIP's kernel_map.size to be size of the entire kernel
riscv: entry: always initialize regs->a0 to -ENOSYS
riscv: Re-introduce global icache flush in patch_text_XXX()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for tracing:
- Prevent a NULL pointer dereference in the error path of RTLA tool
- Fix an infinite loop bug when reading from the ring buffer when
closed. If there's a thread trying to read the ring buffer and it
gets closed by another thread, the one reading will go into an
infinite loop when the buffer is empty instead of exiting back to
user space"
* tag 'trace-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/osnoise: Prevent NULL dereference in error handling
tracing: Return from tracing_buffers_read() if the file has been closed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull key fixes from Jarkko Sakkinen:
"Two bug fixes for a memory corruption bug and a memory leak bug in the
DCP trusted keys type.
Just as a reminder DCP was a crypto coprocessor in i.MX SoCs"
* tag 'keys-trusted-next-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix leak of blob encryption key
KEYS: trusted: fix DCP blob payload length assignment
|
|
Reported-by: syzbot+95e40eae71609e40d851@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+510b0b28f8e6de64d307@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
