summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-22Merge tag 'spi-v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This has been a fairly quiet release for SPI, though it is likely that the next release will have some big changes as there's some preparatory work for multiple chip select support gone in - the rest of the code is on the list but will need to be rebased onto -rc1. Otherwise there's a couple of new tunables for chip select timings, some new devices and smaller device specific updates and fixes. - Support for configuring the hold and minimum inactive times for chip selects. - Beginnings of support for supporting devices which have multiple chip selects on a single device. - Support for newer Broadcom HSSPI and Intel controllers, Silicon Labs EM3581 and SI3210" * tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (67 commits) spi: dt-bindings: qcom,spi-qcom-qspi: document OPP and power-domains spi: spidev: drop the incorrect notice from Kconfig spi: bcm63xx-hsspi: fix error code in probe spi: bcmbca-hsspi: Fix error code in probe() function spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one() spi: intel: Check number of chip selects after reading the descriptor spi: xilinx: add force_irq for QSPI mode spi: spi-st-ssc: convert to DT schema spi: Reorder fields in 'struct spi_transfer' spi: cadence-quadspi: use STIG mode for small reads spi: cadence-quadspi: setup ADDR Bits in cmd reads spi: cadence-quadspi: Add flag for direct mode writes spi: cadence-quadspi: Reset CMD_CTRL Reg on cmd r/w completion MAINTAINERS: Remove file reference for Broadcom Broadband SoC HS SPI driver entry spi: bcm63xx-hsspi: bcmbca-hsspi: fix _be16 type usage MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers spi: bcmbca-hsspi: Add driver for newer HSSPI controller spi: bcm63xx-hsspi: Disable spi mem dual io read op support spi: spi-mem: Allow controller supporting mem_ops without exec_op spi: bcm63xx-hsspi: Add prepend mode support ...
2023-02-22Merge tag 'regulator-v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This has been a very quiet release for the regulator API: there's one new driver for the Maxim MAX20411, some DT schema conversions and some small tweaks and improvements but really nothing major at all" * tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (22 commits) regulator: max597x: Align for simple_mfd_i2c driver regulator: max20411: Fix off-by-one for n_voltages setting regulator: max597x: Remove unused variable regulator: tps65219: use generic set_bypass() regulator: s5m8767: Bounds check id indexing into arrays regulator: max77802: Bounds check regulator id against opmode regulator: max20411: Convert to i2c's .probe_new() regulator: scmi: Allow for zero voltage domains regulator: max20411: Directly include bitfield.h regulator: Introduce Maxim MAX20411 Step-Down converter regulator: dt-bindings: Describe Maxim MAX20411 regulator: dt-bindings: qcom-labibb: Allow regulator-common properties regulator: dt-bindings: fixed-regulator: allow gpios property regulator: tps65219: use IS_ERR() to detect an error pointer regulator: mcp16502: add enum MCP16502_REG_HPM description regulator: fixed-helper: use the correct function name in comment regulator: act8945a: fix non-kernel-doc comments dt-bindings: regulators: convert non-smd RPM Regulators bindings to dt-schema regulator: dt-bindings: Convert Fairchild FAN53555 to DT schema regulator: dt-bindings: qcom,usb-vbus-regulator: change node name ...
2023-02-22Merge tag 'regmap-v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A quiet release for regmap: we've seen several cleanups, an update for a change in the MDIO APIs and one small fix" * tag 'regmap-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-irq: Remove unused mask_invert flag regmap-irq: Remove unused type_invert flag regmap: Reorder fields in 'struct regmap_bus' to save some memory regmap: apply reg_base and reg_downshift for single register ops
2023-02-22Merge tag 'sound-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The majority of works in this cycle are about ASoC spread over trees. Most of them are for new devices and cleanups / refactoring works, and not much significant changes are seen in the core side. Below are some highlights: ASoC: - Continued refactoring to move into common helper functions - Lots of DT schema conversons and stylistic nits - Continued work on building out the new SOF IPC4 scheme - Continued work for Intel AVS - New drivers for Awinc AT88395, Infineon PEB2466, Iron Device SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034, Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1 ALSA: - A few cleanups to make the remove callbacks to void returns - FireWire refactoring and enhancements - PCM kselftest enhancements" * tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits) ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks ASoC: soc-ac97: Return correct error codes ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared ASoC: cs35l45: Remove separate namespace for tables ASoC: cs35l45: Remove separate tables module ASoC: soc-ac97: Convert to agnostic GPIO API ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi" ALSA: hda: cs35l41: Enable Amp High Pass Filter ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded ALSA: hda: cs35l41: Correct error condition handling ASoC: codecs: wcd934x: Use min macro for comparison and assignment ASoC: Intel: Skylake: Fix struct definition ASoC: tlv320adcx140: extend list of supported samplerates ASoC: imx-pcm-rpmsg: Remove unused variable SoC: rt5682s: Disable jack detection interrupt during suspend ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3 ASoC: SOF: Intel: Enable d0i3 work for ipc4 ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version ASoC: SOF: Introduce a new set_pm_gate() IPC PM op ...
2023-02-22bpf: add missing header file includeLinus Torvalds
Commit 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") built fine on x86-64 and arm64, and that's the extent of my local build testing. It turns out those got the <linux/nospec.h> include incidentally through other header files (<linux/kvm_host.h> in particular), but that was not true of other architectures, resulting in build errors kernel/bpf/core.c: In function ‘___bpf_prog_run’: kernel/bpf/core.c:1913:3: error: implicit declaration of function ‘barrier_nospec’ so just make sure to explicitly include the proper <linux/nospec.h> header file to make everybody see it. Fixes: 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Reported-by: Huacai Chen <chenhuacai@loongson.cn> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-22dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332Kathiravan T
Document the qcom,tcsr-ipq5332 compatible. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230130170155.27266-2-quic_kathirav@quicinc.com
2023-02-22dt-bindings: mfd: Add NXP BBNSMJacky Bai
Add binding for NXP BBNSM(Battery-Backed Non-Secure Module). Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230129070823.1945489-2-ping.bai@nxp.com
2023-02-22mfd: ntxec: Add version number for EC in Tolino VisionAndreas Kemnade
The EC firmware has a different version number than anything defined until now. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230127165828.3256170-1-andreas@kemnade.info
2023-02-22dt-bindings: mfd: syscon: Add mt8365-syscfgBernhard Rosenkränzer
Document Mediatek mt8365-syscfg Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230125143503.1015424-4-bero@baylibre.com
2023-02-22mfd: Remove toshiba tmio driversArnd Bergmann
Four separate mfd drivers are in the "tmio" family, and all of them were used in now-removed PXA machines (eseries, tosa, and hx4700), so the mfd drivers and all its children can be removed as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105134622.254560-19-arnd@kernel.org
2023-02-22gfs2: Convert gfs2_page_add_databufs to foliosAndreas Gruenbacher
Convert gfs2_page_add_databufs() to folios and rename it to gfs2_trans_add_databufs(). Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-02-22gfs2: jdata writepage fixAndreas Gruenbacher
The ->writepage() and ->writepages() operations are supposed to write entire pages. However, on filesystems with a block size smaller than PAGE_SIZE, __gfs2_jdata_writepage() only adds the first block to the current transaction instead of adding the entire page. Fix that. Fixes: 18ec7d5c3f43 ("[GFS2] Make journaled data files identical to normal files on disk") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-02-22backlight: ktz8866: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230127152639.1347229-1-u.kleine-koenig@pengutronix.de
2023-02-22backlight: ktz8866: Add support for Kinetic KTZ8866 backlightJianhua Lu
Add support for Kinetic KTZ8866 backlight, which is used in Xiaomi tablet, Mi Pad 5 series. This driver lightly based on downstream implementation [1]. [1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120155018.15376-2-lujianhua000@gmail.com
2023-02-22dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlightJianhua Lu
Add Kinetic KTZ8866 backlight binding documentation. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120155018.15376-1-lujianhua000@gmail.com
2023-02-22backlight: pwm_bl: Don't rely on a disabled PWM emiting inactive stateUwe Kleine-König
Most but not all PWMs drive the PWM pin to its inactive state when disabled. However if there is no enable_gpio and no regulator the PWM must drive the inactive state to actually disable the backlight. So keep the PWM on in this case. Note that to determine if there is a regulator some effort is required because it might happen that there isn't actually one but the regulator core gave us a dummy. (A nice side effect is that this makes the regulator actually optional even on fully constrained systems.) This fixes backlight disabling e.g. on i.MX6 when an inverted PWM is used. Hint for the future: If this change results in a regression, the bug is in the lowlevel PWM driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120120018.161103-3-u.kleine-koenig@pengutronix.de
2023-02-22backlight: pwm_bl: Configure pwm only once per backlight toggleUwe Kleine-König
When the function pwm_backlight_update_status() was called with brightness > 0, pwm_get_state() was called twice (once directly and once in compute_duty_cycle). Also pwm_apply_state() was called twice (once in pwm_backlight_power_on() and once directly). Optimize this to do both calls only once. Note that with this affects the order of regulator and PWM setup. It's not expected to have a relevant effect on hardware. The rationale for this is that the regulator (and the GPIO) are reasonable to switch in pwm_backlight_power_on()/pwm_backlight_power_off() but the PWM has nothing to do with power. (The post_pwm_on_delay and pwm_off_delay are still there though.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120120018.161103-2-u.kleine-koenig@pengutronix.de
2023-02-22backlight: Remove pxa tosa supportArnd Bergmann
The PXA tosa machine was removed, so this backlight driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105134622.254560-10-arnd@kernel.org
2023-02-22backlight: aat2870: Use backlight helperStephen Kitt
Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230106164856.1453819-2-steve@sk2.org
2023-02-22backlight: ipaq_micro: Use backlight helperStephen Kitt
Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230106164856.1453819-4-steve@sk2.org
2023-02-22backlight: arcxcnn: Use backlight helperStephen Kitt
Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230106164856.1453819-3-steve@sk2.org
2023-02-22backlight: sky81452: Fix sky81452_bl_platform_data kernel-docRandy Dunlap
Correct the struct name and add a short struct description to fix the kernel-doc notation. Prevents this kernel-doc warning: drivers/video/backlight/sky81452-backlight.c:64: warning: expecting prototype for struct sky81452_platform_data. Prototype was for struct sky81452_bl_platform_data instead Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230113064118.30169-1-rdunlap@infradead.org
2023-02-22backlight: pwm_bl: Drop support for legacy PWM probingUwe Kleine-König
There is no in-tree user left which relies on legacy probing. So drop support for it which removes another user of the deprecated pwm_request() function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221117072151.3789691-1-u.kleine-koenig@pengutronix.de
2023-02-22dt-bindings: backlight: qcom-wled: Add PMI8950 compatibleLuca Weiss
Document the compatible for the wled block found in PMI8950. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221101161801.1058969-1-luca@z3ntu.xyz
2023-02-22backlight: ktd253: Switch to use dev_err_probe() helperYang Yingliang
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. It's more simple in error path. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220926142059.2294282-1-yangyingliang@huawei.com
2023-02-22backlight: backlight: Fix doc for backlight_device_get_by_nameMiaoqian Lin
backlight_put() has been dropped, we should call put_device() to drop the reference taken by backlight_device_get_by_name(). Fixes: 0f6a3256fd81 ("backlight: backlight: Drop backlight_put()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221215071902.424005-1-linmq006@gmail.com
2023-02-22Merge branch 'for-6.3/hid-bpf' into for-linusBenjamin Tissoires
Initial support of HID-BPF (Benjamin Tissoires) The history is a little long for this series, as it was intended to be sent for v6.2. However some last minute issues forced us to postpone it to v6.3. Conflicts: * drivers/hid/i2c-hid/Kconfig: commit bf7660dab30d ("HID: stop drivers from selecting CONFIG_HID") conflicts with commit 2afac81dd165 ("HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is") the resolution is simple enough: just drop the "default" and "select" lines as the new commit from Arnd is doing
2023-02-22Merge branch 'for-6.3/uclogic' into for-linusBenjamin Tissoires
UClogic assorted fixes and new devices support (José Expósito)
2023-02-22Merge branch 'for-6.3/steam' into for-linusBenjamin Tissoires
Add Steam Deck support (Vicki Pfau)
2023-02-22Merge branch 'for-6.3/sony' into for-linusBenjamin Tissoires
- enforce DS4 controllers to use hid-playstation (Roderick Colenbrander) - various hid-playstation gyro fixes (Roderick Colenbrander)
2023-02-22Merge branch 'for-6.3/multitouch' into for-linusBenjamin Tissoires
Allow to pass quirks from i2c-hid to hid-multitouch (Allen Ballway & Dmitry Torokhov)
2023-02-22Merge branch 'for-6.3/mcp2221' into for-linusBenjamin Tissoires
prevent UAF in delayed work (Benjamin Tissoires)
2023-02-22Merge branch 'for-6.3/logitech' into for-linusBenjamin Tissoires
- HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera) - add support of Logitech G923 Xbox Edition steering wheel (Walt Holman)
2023-02-22Merge branch 'for-6.3/i2c-hid' into for-linusBenjamin Tissoires
- dev_dbg cleanup (Thomas Weißschuh) - cleanup i2c-hid-acpi (Andy Shevchenko) - goodix: revert/fixes for an actual production device compared to the manufacturer sample (Douglas Anderson)
2023-02-22Merge branch 'for-6.3/hid-sensor' into for-linusBenjamin Tissoires
Allow more custom IIO sensors through HID (Philipp Jungkamp)
2023-02-22Merge branch 'for-6.3/evision' into for-linusBenjamin Tissoires
New hid-evision driver for EVision keyboards (Philippe Valembois)
2023-02-22Merge branch 'for-6.3/bigben' into for-linusBenjamin Tissoires
UAF protection in work struct (Pietro Borrello)
2023-02-22Merge branch 'for-6.3/asus' into for-linusBenjamin Tissoires
UAF protection in work struct (Pietro Borrello)
2023-02-22Merge branch 'for-6.3/hid-core' into for-linusBenjamin Tissoires
- constify hid_ll_driver (Thomas Weißschuh) - map standard Battery System Charging to upower (José Expósito) - couple of assorted fixes and new handling of HID usages (Jingyuan Liang & Ronald Tschalär)
2023-02-22mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leakLiang He
In arizona_clk32k_enable(), we should use pm_runtime_resume_and_get() as pm_runtime_get_sync() will increase the refcnt even when it returns an error. Signed-off-by: Liang He <windhl@126.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105061055.1509261-1-windhl@126.com
2023-02-22mfd: syscon: Allow reset control for syscon devicesJeremy Kerr
Simple syscon devices may require deassertion of a reset signal in order to access their register set. Rather than requiring a custom driver to implement this, we can use the generic "resets" specifiers to link a reset line to the syscon. This change adds an optional reset line to the syscon device description, and deasserts the reset if detected. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105005010.124948-3-jk@codeconstruct.com.au
2023-02-22dt-bindings: mfd/syscon: Add resets propertyJeremy Kerr
Simple syscon devices may require deassertion of a reset signal in order to access their register set. This change adds the `resets` property from reset.yaml#/properties/resets (referenced through core.yaml), specifying a maxItems of 1 for a single (optional) reset descriptor. This will allow a future change to the syscon driver to implement reset control. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105005010.124948-2-jk@codeconstruct.com.au
2023-02-22dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatibleBrad Larson
Add the AMD Pensando Elba SoC system registers compatible Signed-off-by: Brad Larson <blarson@amd.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230119035136.21603-6-blarson@amd.com
2023-02-22dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226Matti Lehtimäki
Document the qcom,msm8226-tcsr compatible. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230112202612.791455-5-matti.lehtimaki@gmail.com
2023-02-22mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registrationLee Jones
Signed-off-by: Lee Jones <lee@kernel.org>
2023-02-22mfd: axp20x: Switch to the sys-off handler APISamuel Holland
This removes a layer of indirection through pm_power_off() and allows the PMIC handler to be used as a fallback when firmware power off fails. This happens on boards like the Clockwork DevTerm R-01 where OpenSBI does not know how to use the PMIC to power off the board. Move the check for AXP288 to avoid registering a dummy handler. Signed-off-by: Samuel Holland <samuel@sholland.org> [Lee: Removed superfluous new line] Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221228162752.14204-1-samuel@sholland.org
2023-02-22mfd: core: Spelling s/compement/complement/Geert Uytterhoeven
Fix a misspelling of "complement". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/aa7abd7103a0e4be954ea63de78f12e8251b2964.1673271092.git.geert+renesas@glider.be
2023-02-22mfd: max8925: Remove the unused function irq_to_max8925()Jiapeng Chong
The function irq_to_max8925() is defined in the max8925-core.c file, but not called elsewhere, so remove this unused function. drivers/mfd/max8925-core.c:472:40: warning: unused function 'irq_to_max8925'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3561 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221227081805.54185-1-jiapeng.chong@linux.alibaba.com
2023-02-22mfd: qcom-pm8xxx: Remove set but unused variable 'rev'Jiapeng Chong
Variable rev is not effectively used in the function, so delete it. drivers/mfd/qcom-pm8xxx.c:513:6: warning: variable 'rev' set but not used. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3558 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221227081921.56448-1-jiapeng.chong@linux.alibaba.com
2023-02-22dt-bindings: mfd: syscon: Document GXP register compatibleNick Hawkins
Document hpe,gxp-sysreg compatible for GXP registers. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221216183532.78933-4-nick.hawkins@hpe.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-30 18:07:06 +0000