summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-04netfilter: nft_payload: rebuild vlan header on h_proto accessFlorian Westphal
nft can perform merging of adjacent payload requests. This means that: ether saddr 00:11 ... ether type 8021ad ... is a single payload expression, for 8 bytes, starting at the ethernet source offset. Check that offset+length is fully within the source/destination mac addersses. This bug prevents 'ether type' from matching the correct h_proto in case vlan tag got stripped. Fixes: de6843be3082 ("netfilter: nft_payload: rebuild vlan header when needed") Reported-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04ibmveth: Remove condition to recompute TCP header checksum.David Wilder
In some OVS environments the TCP pseudo header checksum may need to be recomputed. Currently this is only done when the interface instance is configured for "Trunk Mode". We found the issue also occurs in some Kubernetes environments, these environments do not use "Trunk Mode", therefor the condition is removed. Performance tests with this change show only a fractional decrease in throughput (< 0.2%). Fixes: 7525de2516fb ("ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.") Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04dmaengine: ti: k3-udma-glue: clean up k3_udma_glue_tx_get_irq() returnDan Carpenter
The k3_udma_glue_tx_get_irq() function currently returns negative error codes on error, zero on error and positive values for success. This complicates life for the callers who need to propagate the error code. Also GCC will not warn about unsigned comparisons when you check: if (unsigned_irq <= 0) All the callers have been fixed now but let's just make this easy going forward. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04net: ti: icssg-prueth: Fix signedness bug in prueth_init_tx_chns()Dan Carpenter
The "tx_chn->irq" variable is unsigned so the error checking does not work correctly. Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04net: ethernet: ti: am65-cpsw: Fix error code in am65_cpsw_nuss_init_tx_chns()Dan Carpenter
This accidentally returns success, but it should return a negative error code. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04vringh: don't use vringh_kiov_advance() in vringh_iov_xfer()Stefano Garzarella
In the while loop of vringh_iov_xfer(), `partlen` could be 0 if one of the `iov` has 0 lenght. In this case, we should skip the iov and go to the next one. But calling vringh_kiov_advance() with 0 lenght does not cause the advancement, since it returns immediately if asked to advance by 0 bytes. Let's restore the code that was there before commit b8c06ad4d67d ("vringh: implement vringh_kiov_advance()"), avoiding using vringh_kiov_advance(). Fixes: b8c06ad4d67d ("vringh: implement vringh_kiov_advance()") Cc: stable@vger.kernel.org Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-03rswitch: Fix PHY station management clock settingYoshihiro Shimoda
Fix the MPIC.PSMCS value following the programming example in the section 6.4.2 Management Data Clock (MDC) Setting, Ethernet MAC IP, S4 Hardware User Manual Rev.1.00. The value is calculated by MPIC.PSMCS = clk[MHz] / (MDC frequency[MHz] * 2) - 1 with the input clock frequency from clk_get_rate() and MDC frequency of 2.5MHz. Otherwise, this driver cannot communicate PHYs on the R-Car S4 Starter Kit board. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Reported-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230926123054.3976752-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03net: nfc: llcp: Add lock when modifying device listJeremy Cline
The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered. Reported-and-tested-by: syzbot+c1d0a03d305972dbbe14@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c1d0a03d305972dbbe14 Signed-off-by: Jeremy Cline <jeremy@jcline.org> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") Link: https://lore.kernel.org/r/20230908235853.1319596-1-jeremy@jcline.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03ethtool: plca: fix plca enable data type while parsing the valueParthiban Veerasooran
The ETHTOOL_A_PLCA_ENABLED data type is u8. But while parsing the value from the attribute, nla_get_u32() is used in the plca_update_sint() function instead of nla_get_u8(). So plca_cfg.enabled variable is updated with some garbage value instead of 0 or 1 and always enables plca even though plca is disabled through ethtool application. This bug has been fixed by parsing the values based on the attributes type in the policy. Fixes: 8580e16c28f3 ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230908044548.5878-1-Parthiban.Veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03qed/red_ll2: Fix undefined behavior bug in struct qed_ll2_infoGustavo A. R. Silva
The flexible structure (a structure that contains a flexible-array member at the end) `qed_ll2_tx_packet` is nested within the second layer of `struct qed_ll2_info`: struct qed_ll2_tx_packet { ... /* Flexible Array of bds_set determined by max_bds_per_packet */ struct { struct core_tx_bd *txq_bd; dma_addr_t tx_frag; u16 frag_len; } bds_set[]; }; struct qed_ll2_tx_queue { ... struct qed_ll2_tx_packet cur_completing_packet; }; struct qed_ll2_info { ... struct qed_ll2_tx_queue tx_queue; struct qed_ll2_cbs cbs; }; The problem is that member `cbs` in `struct qed_ll2_info` is placed just after an object of type `struct qed_ll2_tx_queue`, which is in itself an implicit flexible structure, which by definition ends in a flexible array member, in this case `bds_set`. This causes an undefined behavior bug at run-time when dynamic memory is allocated for `bds_set`, which could lead to a serious issue if `cbs` in `struct qed_ll2_info` is overwritten by the contents of `bds_set`. Notice that the type of `cbs` is a structure full of function pointers (and a cookie :) ): include/linux/qed/qed_ll2_if.h: 107 typedef 108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt, 109 struct qed_ll2_comp_rx_data *data); 110 111 typedef 112 void (*qed_ll2_release_rx_packet_cb)(void *cxt, 113 u8 connection_handle, 114 void *cookie, 115 dma_addr_t rx_buf_addr, 116 bool b_last_packet); 117 118 typedef 119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt, 120 u8 connection_handle, 121 void *cookie, 122 dma_addr_t first_frag_addr, 123 bool b_last_fragment, 124 bool b_last_packet); 125 126 typedef 127 void (*qed_ll2_release_tx_packet_cb)(void *cxt, 128 u8 connection_handle, 129 void *cookie, 130 dma_addr_t first_frag_addr, 131 bool b_last_fragment, bool b_last_packet); 132 133 typedef 134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle, 135 u32 opaque_data_0, u32 opaque_data_1); 136 137 struct qed_ll2_cbs { 138 qed_ll2_complete_rx_packet_cb rx_comp_cb; 139 qed_ll2_release_rx_packet_cb rx_release_cb; 140 qed_ll2_complete_tx_packet_cb tx_comp_cb; 141 qed_ll2_release_tx_packet_cb tx_release_cb; 142 qed_ll2_slowpath_cb slowpath_cb; 143 void *cookie; 144 }; Fix this by moving the declaration of `cbs` to the middle of its containing structure `qed_ll2_info`, preventing it from being overwritten by the contents of `bds_set` at run-time. This bug was introduced in 2017, when `bds_set` was converted to a one-element array, and started to be used as a Variable Length Object (VLO) at run-time. Fixes: f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/ZQ+Nz8DfPg56pIzr@work Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_regShigeru Yoshida
syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Reported-and-tested-by: syzbot+6966546b78d050bb0b5d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6966546b78d050bb0b5d Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230923173549.3284502-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03ipv6: tcp: add a missing nf_reset_ct() in 3WHS handlingIlya Maximets
Commit b0e214d21203 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") is a direct copy of the old commit b59c270104f0 ("[NETFILTER]: Keep conntrack reference until IPsec policy checks are done") but for IPv6. However, it also copies a bug that this old commit had. That is: when the third packet of 3WHS connection establishment contains payload, it is added into socket receive queue without the XFRM check and the drop of connection tracking context. That leads to nf_conntrack module being impossible to unload as it waits for all the conntrack references to be dropped while the packet release is deferred in per-cpu cache indefinitely, if not consumed by the application. The issue for IPv4 was fixed in commit 6f0012e35160 ("tcp: add a missing nf_reset_ct() in 3WHS handling") by adding a missing XFRM check and correctly dropping the conntrack context. However, the issue was introduced to IPv6 code afterwards. Fixing it the same way for IPv6 now. Fixes: b0e214d21203 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") Link: https://lore.kernel.org/netdev/d589a999-d4dd-2768-b2d5-89dec64a4a42@ovn.org/ Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230922210530.2045146-1-i.maximets@ovn.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03ipv4/fib: send notify when delete source address routesHangbin Liu
After deleting an interface address in fib_del_ifaddr(), the function scans the fib_info list for stray entries and calls fib_flush() and fib_table_flush(). Then the stray entries will be deleted silently and no RTM_DELROUTE notification will be sent. This lack of notification can make routing daemons, or monitor like `ip monitor route` miss the routing changes. e.g. + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 192.168.5.5/24 dev dummy1 + ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5 + ip -4 route 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 As Ido reminded, fib_table_flush() isn't only called when an address is deleted, but also when an interface is deleted or put down. The lack of notification in these cases is deliberate. And commit 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down") introduced a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send the route delete notify blindly in fib_table_flush(). To fix this issue, let's add a new flag in "struct fib_info" to track the deleted prefer source address routes, and only send notify for them. After update: + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-02sky2: Make sure there is at least one frag_addr availableKees Cook
In the pathological case of building sky2 with 16k PAGE_SIZE, the frag_addr[] array would never be used, so the original code was correct that size should be 0. But the compiler now gets upset with 0 size arrays in places where it hasn't eliminated the code that might access such an array (it can't figure out that in this case an rx skb with fragments would never be created). To keep the compiler happy, make sure there is at least 1 frag_addr in struct rx_ring_info: In file included from include/linux/skbuff.h:28, from include/net/net_namespace.h:43, from include/linux/netdevice.h:38, from drivers/net/ethernet/marvell/sky2.c:18: drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb': include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=] 416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page' 1257 | dma_unmap_page(&pdev->dev, re->frag_addr[i], | ^~~~~~~~~~~~~~ In file included from drivers/net/ethernet/marvell/sky2.c:41: drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr' 2198 | dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT]; | ^~~~~~~~~ With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so: #define ETH_JUMBO_MTU 9000 causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning. Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309191958.UBw1cjXk-lkp@intel.com/ Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-02net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absentFabio Estevam
Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") the following error is seen on a imx8mn board with a 88E6320 switch: mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done This board does not have an EEPROM attached to the switch though. This problem is well explained by Andrew Lunn: "If there is an EEPROM, and the EEPROM contains a lot of data, it could be that when we perform a hardware reset towards the end of probe, it interrupts an I2C bus transaction, leaving the I2C bus in a bad state, and future reads of the EEPROM do not work. The work around for this was to poll the EEInt status and wait for it to go true before performing the hardware reset. However, we have discovered that for some boards which do not have an EEPROM, EEInt never indicates complete. As a result, mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a warning. We probably need a different solution than calling mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the EEPROM Command register: bit 15 is: EEPROM Unit Busy. This bit must be set to a one to start an EEPROM operation (see EEOp below). Only one EEPROM operation can be executing at one time so this bit must be zero before setting it to a one. When the requested EEPROM operation completes this bit will automatically be cleared to a zero. The transition of this bit from a one to a zero can be used to generate an interrupt (the EEInt in Global 1, offset 0x00). and more interesting is bit 11: Register Loader Running. This bit is set to one whenever the register loader is busy executing instructions contained in the EEPROM." Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error when the EEPROM chip is not present. Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-02ptp: ocp: Fix error handling in ptp_ocp_device_initDinghao Liu
When device_add() fails, ptp_ocp_dev_release() will be called after put_device(). Therefore, it seems that the ptp_ocp_dev_release() before put_device() is redundant. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Vadim Feodrenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: prevent address rewrite in kernel_bind()Jordan Rife
Similar to the change in commit 0bdf399342c5("net: Avoid address overwrite in kernel_connect"), BPF hooks run on bind may rewrite the address passed to kernel_bind(). This change 1) Makes a copy of the bind address in kernel_bind() to insulate callers. 2) Replaces direct calls to sock->ops->bind() in net with kernel_bind() Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jordan Rife <jrife@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: prevent rewrite of msg_name in sock_sendmsg()Jordan Rife
Callers of sock_sendmsg(), and similarly kernel_sendmsg(), in kernel space may observe their value of msg_name change in cases where BPF sendmsg hooks rewrite the send address. This has been confirmed to break NFS mounts running in UDP mode and has the potential to break other systems. This patch: 1) Creates a new function called __sock_sendmsg() with same logic as the old sock_sendmsg() function. 2) Replaces calls to sock_sendmsg() made by __sys_sendto() and __sys_sendmsg() with __sock_sendmsg() to avoid an unnecessary copy, as these system calls are already protected. 3) Modifies sock_sendmsg() so that it makes a copy of msg_name if present before passing it down the stack to insulate callers from changes to the send address. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jordan Rife <jrife@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: replace calls to sock->ops->connect() with kernel_connect()Jordan Rife
commit 0bdf399342c5 ("net: Avoid address overwrite in kernel_connect") ensured that kernel_connect() will not overwrite the address parameter in cases where BPF connect hooks perform an address rewrite. This change replaces direct calls to sock->ops->connect() in net with kernel_connect() to make these call safe. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jordan Rife <jrife@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()David Howells
Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself. Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Reported-by: syzbot+62cbf263225ae13ff153@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/0000000000001c12b30605378ce8@google.com/ Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric Dumazet <edumazet@google.com> cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> cc: "David S. Miller" <davem@davemloft.net> cc: David Ahern <dsahern@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: Jakub Kicinski <kuba@kernel.org> cc: netdev@vger.kernel.org cc: bpf@vger.kernel.org cc: syzkaller-bugs@googlegroups.com Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01neighbour: fix data-races around n->outputEric Dumazet
n->output field can be read locklessly, while a writer might change the pointer concurrently. Add missing annotations to prevent load-store tearing. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: fix possible store tearing in neigh_periodic_work()Eric Dumazet
While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev(). Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01Merge tag 'for-net-2023-09-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth bluetooth pull request for net: - Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - Fix handling of listen for ISO unicast - Fix build warnings - Fix leaking content of local_codecs - Add shutdown function for QCA6174 - Delete unused hci_req_prepare_suspend() declaration - Fix hci_link_tx_to RCU lock usage - Avoid redundant authentication Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: stmmac: platform: fix the incorrect parameterClark Wang
The second parameter of stmmac_pltfr_init() needs the pointer of "struct plat_stmmacenet_data". So, correct the parameter typo when calling the function. Otherwise, it may cause this alignment exception when doing suspend/resume. [ 49.067201] CPU1 is up [ 49.135258] Internal error: SP/PC alignment exception: 000000008a000000 [#1] PREEMPT SMP [ 49.143346] Modules linked in: soc_imx9 crct10dif_ce polyval_ce nvmem_imx_ocotp_fsb_s400 polyval_generic layerscape_edac_mod snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_imx_card snd_soc_wm8962 el_enclave snd_soc_fsl_micfil rtc_pcf2127 rtc_pcf2131 flexcan can_dev snd_soc_fsl_xcvr snd_soc_fsl_sai imx8_media_dev(C) snd_soc_fsl_utils fuse [ 49.173393] CPU: 0 PID: 565 Comm: sh Tainted: G C 6.5.0-rc4-next-20230804-05047-g5781a6249dae #677 [ 49.183721] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 49.189190] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 49.196140] pc : 0x80800052 [ 49.198931] lr : stmmac_pltfr_resume+0x34/0x50 [ 49.203368] sp : ffff800082f8bab0 [ 49.206670] x29: ffff800082f8bab0 x28: ffff0000047d0ec0 x27: ffff80008186c170 [ 49.213794] x26: 0000000b5e4ff1ba x25: ffff800081e5fa74 x24: 0000000000000010 [ 49.220918] x23: ffff800081fe0000 x22: 0000000000000000 x21: 0000000000000000 [ 49.228042] x20: ffff0000001b4010 x19: ffff0000001b4010 x18: 0000000000000006 [ 49.235166] x17: ffff7ffffe007000 x16: ffff800080000000 x15: 0000000000000000 [ 49.242290] x14: 00000000000000fc x13: 0000000000000000 x12: 0000000000000000 [ 49.249414] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff800082f8b8c0 [ 49.256538] x8 : 0000000000000008 x7 : 0000000000000001 x6 : 000000005f54a200 [ 49.263662] x5 : 0000000001000000 x4 : ffff800081b93680 x3 : ffff800081519be0 [ 49.270786] x2 : 0000000080800052 x1 : 0000000000000000 x0 : ffff0000001b4000 [ 49.277911] Call trace: [ 49.280346] 0x80800052 [ 49.282781] platform_pm_resume+0x2c/0x68 [ 49.286785] dpm_run_callback.constprop.0+0x74/0x134 [ 49.291742] device_resume+0x88/0x194 [ 49.295391] dpm_resume+0x10c/0x230 [ 49.298866] dpm_resume_end+0x18/0x30 [ 49.302515] suspend_devices_and_enter+0x2b8/0x624 [ 49.307299] pm_suspend+0x1fc/0x348 [ 49.310774] state_store+0x80/0x104 [ 49.314258] kobj_attr_store+0x18/0x2c [ 49.318002] sysfs_kf_write+0x44/0x54 [ 49.321659] kernfs_fop_write_iter+0x120/0x1ec [ 49.326088] vfs_write+0x1bc/0x300 [ 49.329485] ksys_write+0x70/0x104 [ 49.332874] __arm64_sys_write+0x1c/0x28 [ 49.336783] invoke_syscall+0x48/0x114 [ 49.340527] el0_svc_common.constprop.0+0xc4/0xe4 [ 49.345224] do_el0_svc+0x38/0x98 [ 49.348526] el0_svc+0x2c/0x84 [ 49.351568] el0t_64_sync_handler+0x100/0x12c [ 49.355910] el0t_64_sync+0x190/0x194 [ 49.359567] Code: ???????? ???????? ???????? ???????? (????????) [ 49.365644] ---[ end trace 0000000000000000 ]--- Fixes: 97117eb51ec8 ("net: stmmac: platform: provide stmmac_pltfr_init()") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-28ice: always add legacy 32byte RXDID in supported_rxdidsMichal Schmidt
When the PF and VF drivers both support flexible rx descriptors and have negotiated the VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC capability, the VF driver queries the PF for the list of supported descriptor formats (VIRTCHNL_OP_GET_SUPPORTED_RXDIDS). The PF driver is supposed to set the supported_rxdids bits that correspond to the descriptor formats the firmware implements. The legacy 32-byte rx desc format is always supported, even though it is not expressed in GLFLXP_RXDID_FLAGS. The ice driver does not advertise the legacy 32-byte rx desc support, which leads to this failure to bring up the VF using the Intel out-of-tree iavf driver: iavf 0000:41:01.0: PF does not list support for default Rx descriptor format ... iavf 0000:41:01.0: PF returned error -5 (VIRTCHNL_STATUS_ERR_PARAM) to our request 6 The in-tree iavf driver does not expose this bug, because it does not yet implement VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC. The ice driver must always set the ICE_RXDID_LEGACY_1 bit in supported_rxdids. The Intel out-of-tree ice driver and the ice driver in DPDK both do this. I copied this piece of the code and the comment text from the Intel out-of-tree driver. Fixes: e753df8fbca5 ("ice: Add support Flex RXD") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230920115439.61172-1-mschmidt@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-22drivers/net: process the result of hdlc_open() and add call of hdlc_close() ↵Alexandra Diupina
in uhdlc_close() Process the result of hdlc_open() and call uhdlc_close() in case of an error. It is necessary to pass the error code up the control flow, similar to a possible error in request_irq(). Also add a hdlc_close() call to the uhdlc_close() because the comment to hdlc_close() says it must be called by the hardware driver when the HDLC device is being closed Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-21Merge tag 'net-6.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE - netfilter: fix entries val in rule reset audit log - eth: stmmac: fix incorrect rxq|txq_stats reference Previous releases - regressions: - ipv4: fix null-deref in ipv4_link_failure - netfilter: - fix several GC related issues - fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP - eth: team: fix null-ptr-deref when team device type is changed - eth: i40e: fix VF VLAN offloading when port VLAN is configured - eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB Previous releases - always broken: - core: fix ETH_P_1588 flow dissector - mptcp: fix several connection hang-up conditions - bpf: - avoid deadlock when using queue and stack maps from NMI - add override check to kprobe multi link attach - hsr: properly parse HSRv1 supervisor frames. - eth: igc: fix infinite initialization loop with early XDP redirect - eth: octeon_ep: fix tx dma unmap len values in SG - eth: hns3: fix GRE checksum offload issue" * tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast() igc: Expose tx-usecs coalesce setting to user octeontx2-pf: Do xdp_do_flush() after redirects. bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI net: ena: Flush XDP packets on error. net/handshake: Fix memory leak in __sock_create() and sock_alloc_file() net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev' netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP netfilter: nf_tables: fix memleak when more than 255 elements expired netfilter: nf_tables: disable toggling dormant table state more than once vxlan: Add missing entries to vxlan_get_size() net: rds: Fix possible NULL-pointer dereference team: fix null-ptr-deref when team device type is changed net: bridge: use DEV_STATS_INC() net: hns3: add 5ms delay before clear firmware reset irq source net: hns3: fix fail to delete tc flower rules during reset issue net: hns3: only enable unicast promisc when mac table full net: hns3: fix GRE checksum offload issue net: hns3: add cmdq check for vf periodic service task net: stmmac: fix incorrect rxq|txq_stats reference ...
2023-09-21Merge tag 'v6.6-rc3.vfs.ctime.revert' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull finegrained timestamp reverts from Christian Brauner: "Earlier this week we sent a few minor fixes for the multi-grained timestamp work in [1]. While we were polishing those up after Linus realized that there might be a nicer way to fix them we received a regression report in [2] that fine grained timestamps break gnulib tests and thus possibly other tools. The kernel will elide fine-grain timestamp updates when no one is actively querying for them to avoid performance impacts. So a sequence like write(f1) stat(f2) write(f2) stat(f2) write(f1) stat(f1) may result in timestamp f1 to be older than the final f2 timestamp even though f1 was last written too but the second write didn't update the timestamp. Such plotholes can lead to subtle bugs when programs compare timestamps. For example, the nap() function in [2] will estimate that it needs to wait one ns on a fine-grain timestamp enabled filesytem between subsequent calls to observe a timestamp change. But in general we don't update timestamps with more than one jiffie if we think that no one is actively querying for fine-grain timestamps to avoid performance impacts. While discussing various fixes the decision was to go back to the drawing board and ultimately to explore a solution that involves only exposing such fine-grained timestamps to nfs internally and never to userspace. As there are multiple solutions discussed the honest thing to do here is not to fix this up or disable it but to cleanly revert. The general infrastructure will probably come back but there is no reason to keep this code in mainline. The general changes to timestamp handling are valid and a good cleanup that will stay. The revert is fully bisectable" Link: https://lore.kernel.org/all/20230918-hirte-neuzugang-4c2324e7bae3@brauner [1] Link: https://lore.kernel.org/all/bf0524debb976627693e12ad23690094e4514303.camel@linuxfromscratch.org [2] * tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: Revert "fs: add infrastructure for multigrain timestamps" Revert "btrfs: convert to multigrain timestamps" Revert "ext4: switch to multigrain timestamps" Revert "xfs: switch to multigrain timestamps" Revert "tmpfs: add support for multigrain timestamps"
2023-09-21Merge tag 'powerpc-6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for breakpoint handling which was using get_user() while atomic - Fix the Power10 HASHCHK handler which was using get_user() while atomic - A few build fixes for issues caused by recent changes Thanks to Benjamin Gray, Christophe Leroy, Kajol Jain, and Naveen N Rao. * tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/dexcr: Move HASHCHK trap handler powerpc/82xx: Select FSL_SOC powerpc: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION and FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY powerpc/watchpoints: Annotate atomic context in more places powerpc/watchpoint: Disable pagefaults when getting user instruction powerpc/watchpoints: Disable preemption in thread_change_pc() powerpc/perf/hv-24x7: Update domain value check
2023-09-21Merge tag 'for-linus-6.6a-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - remove some unused functions in the Xen event channel handling - fix a regression (introduced during the merge window) when booting as Xen PV guest - small cleanup removing another strncpy() instance * tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/efi: refactor deprecated strncpy x86/xen: allow nesting of same lazy mode x86/xen: move paravirt lazy code arm/xen: remove lazy mode related definitions xen: simplify evtchn_do_upcall() call maze
2023-09-21Merge tag 'fixes-2023-09-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock test fixes from Mike Rapoport: "Fix several compilation errors and warnings in memblock tests" * tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: fix warning ‘struct seq_file’ declared inside parameter list memblock tests: fix warning: "__ALIGN_KERNEL" redefined memblock tests: Fix compilation errors.
2023-09-21Merge tag 'sound-6.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A large collection of fixes around this time. All small and mostly trivial fixes. - Lots of fixes for the new -Wformat-truncation warnings - A fix in ALSA rawmidi core regression and UMP handling - Series of Cirrus codec fixes - ASoC Intel and Realtek codec fixes - Usual HD- and USB-audio quirks and AMD ASoC quirks" * tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits) ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning ALSA: rawmidi: Fix NULL dereference at proc read ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful ASoC: SOF: Intel: MTL: Reduce the DSP init timeout ASoC: cs42l43: Add shared IRQ flag for shutters ASoC: imx-audmix: Fix return error with devm_clk_get() ASoC: hdaudio.c: Add missing check for devm_kstrdup ALSA: riptide: Fix -Wformat-truncation warning for longname string ALSA: cs4231: Fix -Wformat-truncation warning for longname string ALSA: ad1848: Fix -Wformat-truncation warning for longname string ALSA: hda: generic: Check potential mixer name string truncation ALSA: cmipci: Fix -Wformat-truncation warning ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names ALSA: firewire: Fix -Wformat-truncation warning for longname string ALSA: xen: Fix -Wformat-truncation warning ALSA: opti9x: Fix -Wformat-truncation warning ALSA: es1688: Fix -Wformat-truncation warning ALSA: cs4236: Fix -Wformat-truncation warning ...
2023-09-21Merge tag 'hwmon-for-v6.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "One patch to drop a non-existent alarm attribute in the nct6775 driver" * tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6775) Fix non-existent ALARM warning
2023-09-21Merge tag 'nf-23-09-20' of ↵Paolo Abeni
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter updates for net The following three patches fix regressions in the netfilter subsystem: 1. Reject attempts to repeatedly toggle the 'dormant' flag in a single transaction. Doing so makes nf_tables lose track of the real state vs. the desired state. This ends with an attempt to unregister hooks that were never registered in the first place, which yields a splat. 2. Fix element counting in the new nftables garbage collection infra that came with 6.5: More than 255 expired elements wraps a counter which results in memory leak. 3. Since 6.4 ipset can BUG when a set is renamed while a CREATE command is in progress, fix from Jozsef Kadlecsik. * tag 'nf-23-09-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP netfilter: nf_tables: fix memleak when more than 255 elements expired netfilter: nf_tables: disable toggling dormant table state more than once ==================== Link: https://lore.kernel.org/r/20230920084156.4192-1-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-21sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()Edward Cree
Several places in TC offload code assumed that the return from rhashtable_lookup_get_insert_fast() was always either NULL or a valid pointer to an existing entry, but in fact that function can return an error pointer. In that case, perform the usual cleanup of the newly created entry, then pass up the error, rather than attempting to take a reference on the old entry. Fixes: d902e1a737d4 ("sfc: bare bones TC offload on EF100") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230919183949.59392-1-edward.cree@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-21igc: Expose tx-usecs coalesce setting to userMuhammad Husaini Zulkifli
When users attempt to obtain the coalesce setting using the ethtool command, current code always returns 0 for tx-usecs. This is because I225/6 always uses a queue pair setting, hence tx_coalesce_usecs does not return a value during the igc_ethtool_get_coalesce() callback process. The pair queue condition checking in igc_ethtool_get_coalesce() is removed by this patch so that the user gets information of the value of tx-usecs. Even if i225/6 is using queue pair setting, there is no harm in notifying the user of the tx-usecs. The implementation of the current code may have previously been a copy of the legacy code i210. Since I225 has the queue pair setting enabled, tx-usecs will always adhere to the user-set rx-usecs value. An error message will appear when the user attempts to set the tx-usecs value for the input parameters because, by default, they should only set the rx-usecs value. This patch also adds the helper function to get the previous rx coalesce value similar to tx coalesce. How to test: User can get the coalesce value using ethtool command. Example command: Get: ethtool -c <interface> Previous output: rx-usecs: 3 rx-frames: n/a rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 0 tx-frames: n/a tx-usecs-irq: n/a tx-frames-irq: n/a New output: rx-usecs: 3 rx-frames: n/a rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 3 tx-frames: n/a tx-usecs-irq: n/a tx-frames-irq: n/a Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-21Merge branch 'add-missing-xdp_do_flush-invocations'Paolo Abeni
Sebastian Andrzej Siewior says: ==================== Add missing xdp_do_flush() invocations. I've been looking at the drivers/ XDP users and noticed that some XDP_REDIRECT user don't invoke xdp_do_flush() at the end. ==================== Link: https://lore.kernel.org/r/20230918153611.165722-1-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-21octeontx2-pf: Do xdp_do_flush() after redirects.Sebastian Andrzej Siewior
xdp_do_flush() should be invoked before leaving the NAPI poll function if XDP-redirect has been performed. Invoke xdp_do_flush() before leaving NAPI. Cc: Geetha sowjanya <gakula@marvell.com> Cc: Subbaraya Sundeep <sbhatta@marvell.com> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: hariprasad <hkelam@marvell.com> Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Geethasowjanya Akula <gakula@marvell.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-21bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPISebastian Andrzej Siewior
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by __bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each round. bnxt_poll_nitroa0() lacks this feature. xdp_do_flush() should be invoked before leaving the NAPI callback. Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI. Cc: Michael Chan <michael.chan@broadcom.com> Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-21net: ena: Flush XDP packets on error.Sebastian Andrzej Siewior
xdp_do_flush() should be invoked before leaving the NAPI poll function after a XDP-redirect. This is not the case if the driver leaves via the error path (after having a redirect in one of its previous iterations). Invoke xdp_do_flush() also in the error path. Cc: Arthur Kiyanovski <akiyano@amazon.com> Cc: David Arinzon <darinzon@amazon.com> Cc: Noam Dagan <ndagan@amazon.com> Cc: Saeed Bishara <saeedb@amazon.com> Cc: Shay Agroskin <shayagr@amazon.com> Fixes: a318c70ad152b ("net: ena: introduce XDP redirect implementation") Acked-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-20Merge tag 'media/v6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - driver fixes due to incorrect fwnode_handle_put() call - bt8xx: bttv_risc_packed(): remove field checks - vb2: frame_vector.c: replace WARN_ONCE with a comment - imx219: a couple typo fixes and perform a full mode set unconditionally - uvcvideo: Fix OOB read - some dependency fixes * tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call media: vb2: frame_vector.c: replace WARN_ONCE with a comment media: uvcvideo: Fix OOB read media: bt8xx: bttv_risc_packed(): remove field checks media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call media: i2c: imx219: Perform a full mode set unconditionally media: i2c: imx219: Fix crop rectangle setting when changing format media: i2c: imx219: Fix a typo referring to a wrong variable media: i2c: max9286: Remove an incorrect fwnode_handle_put() call media: ivsc: Depend on VIDEO_DEV media: via: Use correct dependency for camera sensor drivers media: v4l: Use correct dependency for camera sensor drivers media: pci: ivsc: Select build dependencies
2023-09-20Merge tag 'for-6.6-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more followup fixes to the directory listing. People have noticed different behaviour compared to other filesystems after changes in 6.5. This is now unified to more "logical" and expected behaviour while still within POSIX. And a few more fixes for stable. - change behaviour of readdir()/rewinddir() when new directory entries are created after opendir(), properly tracking the last entry - fix race in readdir when multiple threads can set the last entry index for a directory Additionally: - use exclusive lock when direct io might need to drop privs and call notify_change() - don't clear uptodate bit on page after an error, this may lead to a deadlock in subpage mode - fix waiting pattern when multiple readers block on Merkle tree data, switch to folios" * tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix race between reading a directory and adding entries to it btrfs: refresh dir last index during a rewinddir(3) call btrfs: set last dir index to the current last index when opening dir btrfs: don't clear uptodate on write errors btrfs: file_remove_privs needs an exclusive lock in direct io write btrfs: convert btrfs_read_merkle_tree_page() to use a folio
2023-09-20Bluetooth: hci_codec: Fix leaking content of local_codecsLuiz Augusto von Dentz
The following memory leak can be observed when the controller supports codecs which are stored in local_codecs list but the elements are never freed: unreferenced object 0xffff88800221d840 (size 32): comm "kworker/u3:0", pid 36, jiffies 4294898739 (age 127.060s) hex dump (first 32 bytes): f8 d3 02 03 80 88 ff ff 80 d8 21 02 80 88 ff ff ..........!..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffb324f557>] __kmalloc+0x47/0x120 [<ffffffffb39ef37d>] hci_codec_list_add.isra.0+0x2d/0x160 [<ffffffffb39ef643>] hci_read_codec_capabilities+0x183/0x270 [<ffffffffb39ef9ab>] hci_read_supported_codecs+0x1bb/0x2d0 [<ffffffffb39f162e>] hci_read_local_codecs_sync+0x3e/0x60 [<ffffffffb39ff1b3>] hci_dev_open_sync+0x943/0x11e0 [<ffffffffb396d55d>] hci_power_on+0x10d/0x3f0 [<ffffffffb30c99b4>] process_one_work+0x404/0x800 [<ffffffffb30ca134>] worker_thread+0x374/0x670 [<ffffffffb30d9108>] kthread+0x188/0x1c0 [<ffffffffb304db6b>] ret_from_fork+0x2b/0x50 [<ffffffffb300206a>] ret_from_fork_asm+0x1a/0x30 Cc: stable@vger.kernel.org Fixes: 8961987f3f5f ("Bluetooth: Enumerate local supported codec and cache details") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: hci_core: Fix build warningsLuiz Augusto von Dentz
This fixes the following warnings: net/bluetooth/hci_core.c: In function ‘hci_register_dev’: net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 5 [-Wformat-truncation=] 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~ net/bluetooth/hci_core.c:2620:50: note: directive argument in the range [0, 2147483647] 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~~~~~~ net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and 14 bytes into a destination of size 8 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: Avoid redundant authenticationYing Hsu
While executing the Android 13 CTS Verifier Secure Server test on a ChromeOS device, it was observed that the Bluetooth host initiates authentication for an RFCOMM connection after SSP completes. When this happens, some Intel Bluetooth controllers, like AC9560, would disconnect with "Connection Rejected due to Security Reasons (0x0e)". Historically, BlueZ did not mandate this authentication while an authenticated combination key was already in use for the connection. This behavior was changed since commit 7b5a9241b780 ("Bluetooth: Introduce requirements for security level 4"). So, this patch addresses the aforementioned disconnection issue by restoring the previous behavior. Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: ISO: Fix handling of listen for unicastLuiz Augusto von Dentz
iso_listen_cis shall only return -EADDRINUSE if the listening socket has the destination set to BDADDR_ANY otherwise if the destination is set to a specific address it is for broadcast which shall be ignored. Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: Fix hci_link_tx_to RCU lock usageYing Hsu
Syzbot found a bug "BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580". It is because hci_link_tx_to holds an RCU read lock and calls hci_disconnect which would hold a mutex lock since the commit a13f316e90fd ("Bluetooth: hci_conn: Consolidate code for aborting connections"). Here's an example call trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xfc/0x174 lib/dump_stack.c:106 ___might_sleep+0x4a9/0x4d3 kernel/sched/core.c:9663 __mutex_lock_common kernel/locking/mutex.c:576 [inline] __mutex_lock+0xc7/0x6e7 kernel/locking/mutex.c:732 hci_cmd_sync_queue+0x3a/0x287 net/bluetooth/hci_sync.c:388 hci_abort_conn+0x2cd/0x2e4 net/bluetooth/hci_conn.c:1812 hci_disconnect+0x207/0x237 net/bluetooth/hci_conn.c:244 hci_link_tx_to net/bluetooth/hci_core.c:3254 [inline] __check_timeout net/bluetooth/hci_core.c:3419 [inline] __check_timeout+0x310/0x361 net/bluetooth/hci_core.c:3399 hci_sched_le net/bluetooth/hci_core.c:3602 [inline] hci_tx_work+0xe8f/0x12d0 net/bluetooth/hci_core.c:3652 process_one_work+0x75c/0xba1 kernel/workqueue.c:2310 worker_thread+0x5b2/0x73a kernel/workqueue.c:2457 kthread+0x2f7/0x30b kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 This patch releases RCU read lock before calling hci_disconnect and reacquires it afterward to fix the bug. Fixes: a13f316e90fd ("Bluetooth: hci_conn: Consolidate code for aborting connections") Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: hci_sync: Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTERLuiz Augusto von Dentz
When HCI_QUIRK_STRICT_DUPLICATE_FILTER is set LE scanning requires periodic restarts of the scanning procedure as the controller would consider device previously found as duplicated despite of RSSI changes, but in order to set the scan timeout properly set le_scan_restart needs to be synchronous so it shall not use hci_cmd_sync_queue which defers the command processing to cmd_sync_work. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-bluetooth/578e6d7afd676129decafba846a933f5@agner.ch/#t Fixes: 27d54b778ad1 ("Bluetooth: Rework le_scan_restart for hci_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: btusb: add shutdown function for QCA6174Rocky Liao
We should send hci reset command before bt turn off, which can reset bt firmware status. Signed-off-by: Rocky Liao <quic_rjliao@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: Delete unused hci_req_prepare_suspend() declarationYao Xiao
hci_req_prepare_suspend() has been deprecated in favor of hci_suspend_sync(). Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-01 16:20:43 +0000