summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-09net/mlx5: Fix bridge mode operations when there are no VFsBenjamin Poirier
Currently, trying to set the bridge mode attribute when numvfs=0 leads to a crash: bridge link set dev eth2 hwmode vepa [ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] [ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core] [...] [ 168.976037] Call Trace: [ 168.976188] <TASK> [ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core] [ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core] [ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0 [ 168.979714] rtnetlink_rcv_msg+0x159/0x400 [ 168.980451] netlink_rcv_skb+0x54/0x100 [ 168.980675] netlink_unicast+0x241/0x360 [ 168.980918] netlink_sendmsg+0x1f6/0x430 [ 168.981162] ____sys_sendmsg+0x3bb/0x3f0 [ 168.982155] ___sys_sendmsg+0x88/0xd0 [ 168.985036] __sys_sendmsg+0x59/0xa0 [ 168.985477] do_syscall_64+0x79/0x150 [ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 168.987773] RIP: 0033:0x7f8f7950f917 (esw->fdb_table.legacy.vepa_fdb is null) The bridge mode is only relevant when there are multiple functions per port. Therefore, prevent setting and getting this setting when there are no VFs. Note that after this change, there are no settings to change on the PF interface using `bridge link` when there are no VFs, so the interface no longer appears in the `bridge link` output. Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-09-09net/mlx5: Verify support for scheduling element and TSAR typeCarolina Jubran
Before creating a scheduling element in a NIC or E-Switch scheduler, ensure that the requested element type is supported. If the element is of type Transmit Scheduling Arbiter (TSAR), also verify that the specific TSAR type is supported. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Fixes: 85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand") Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-09-09net/mlx5: Add missing masks and QoS bit masks for scheduling elementsCarolina Jubran
Add the missing masks for supported element types and Transmit Scheduling Arbiter (TSAR) types in scheduling elements. Also, add the corresponding bit masks for these types in the QoS capabilities of a NIC scheduler. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-09-09net/mlx5: Explicitly set scheduling element and TSAR typeCarolina Jubran
Ensure the scheduling element type and TSAR type are explicitly initialized in the QoS rate group creation. This prevents potential issues due to default values. Fixes: 1ae258f8b343 ("net/mlx5: E-switch, Introduce rate limiting groups API") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-09-09net/mlx5e: Add missing link mode to ptys2ext_ethtool_mapShahar Shitrit
Add MLX5E_400GAUI_8_400GBASE_CR8 to the extended modes in ptys2ext_ethtool_table, since it was missing. Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-09-09net/mlx5e: Add missing link modes to ptys2ethtool_mapShahar Shitrit
Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy modes in ptys2legacy_ethtool_table, since they were missing. Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-09-09net/mlx5: Update the list of the PCI supported devicesMaher Sanalla
Add the upcoming ConnectX-9 device ID to the table of supported PCI device IDs. Fixes: f908a35b2218 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-09-09net: hsr: remove seqnr_lockEric Dumazet
syzbot found a new splat [1]. Instead of adding yet another spin_lock_bh(&hsr->seqnr_lock) / spin_unlock_bh(&hsr->seqnr_lock) pair, remove seqnr_lock and use atomic_t for hsr->sequence_nr and hsr->sup_sequence_nr. This also avoid a race in hsr_fill_info(). Also remove interlink_sequence_nr which is unused. [1] WARNING: CPU: 1 PID: 9723 at net/hsr/hsr_forward.c:602 handle_std_frame+0x247/0x2c0 net/hsr/hsr_forward.c:602 Modules linked in: CPU: 1 UID: 0 PID: 9723 Comm: syz.0.1657 Not tainted 6.11.0-rc6-syzkaller-00026-g88fac17500f4 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:handle_std_frame+0x247/0x2c0 net/hsr/hsr_forward.c:602 Code: 49 8d bd b0 01 00 00 be ff ff ff ff e8 e2 58 25 00 31 ff 89 c5 89 c6 e8 47 53 a8 f6 85 ed 0f 85 5a ff ff ff e8 fa 50 a8 f6 90 <0f> 0b 90 e9 4c ff ff ff e8 cc e7 06 f7 e9 8f fe ff ff e8 52 e8 06 RSP: 0018:ffffc90000598598 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc90000598670 RCX: ffffffff8ae2c919 RDX: ffff888024e94880 RSI: ffffffff8ae2c926 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff8880627a8cc0 R14: 0000000000000000 R15: ffff888012b03c3a FS: 0000000000000000(0000) GS:ffff88802b700000(0063) knlGS:00000000f5696b40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000768b4000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> hsr_fill_frame_info+0x2c8/0x360 net/hsr/hsr_forward.c:630 fill_frame_info net/hsr/hsr_forward.c:700 [inline] hsr_forward_skb+0x7df/0x25c0 net/hsr/hsr_forward.c:715 hsr_handle_frame+0x603/0x850 net/hsr/hsr_slave.c:70 __netif_receive_skb_core.constprop.0+0xa3d/0x4330 net/core/dev.c:5555 __netif_receive_skb_list_core+0x357/0x950 net/core/dev.c:5737 __netif_receive_skb_list net/core/dev.c:5804 [inline] netif_receive_skb_list_internal+0x753/0xda0 net/core/dev.c:5896 gro_normal_list include/net/gro.h:515 [inline] gro_normal_list include/net/gro.h:511 [inline] napi_complete_done+0x23f/0x9a0 net/core/dev.c:6247 gro_cell_poll+0x162/0x210 net/core/gro_cells.c:66 __napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa92/0x1010 net/core/dev.c:6963 handle_softirqs+0x216/0x8f0 kernel/softirq.c:554 do_softirq kernel/softirq.c:455 [inline] do_softirq+0xb2/0xf0 kernel/softirq.c:442 </IRQ> <TASK> Fixes: 06afd2c31d33 ("hsr: Synchronize sending frames to have always incremented outgoing seq nr.") Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-05Merge tag 'net-6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from can, bluetooth and wireless. No known regressions at this point. Another calm week, but chances are that has more to do with vacation season than the quality of our work. Current release - new code bugs: - smc: prevent NULL pointer dereference in txopt_get - eth: ti: am65-cpsw: number of XDP-related fixes Previous releases - regressions: - Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE", it breaks existing user space - Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid later problems with suspend - can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open - eth: r8152: fix the firmware communication error due to use of bulk write - ptp: ocp: fix serial port information export - eth: igb: fix not clearing TimeSync interrupts for 82580 - Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo Previous releases - always broken: - eth: intel: fix crashes and bugs when reconfiguration and resets happening in parallel - wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power() Misc: - docs: netdev: document guidance on cleanup.h" * tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) ila: call nf_unregister_net_hooks() sooner tools/net/ynl: fix cli.py --subscribe feature MAINTAINERS: fix ptp ocp driver maintainers address selftests: net: enable bind tests net: dsa: vsc73xx: fix possible subblocks range of CAPT block sched: sch_cake: fix bulk flow accounting logic for host fairness docs: netdev: document guidance on cleanup.h net: xilinx: axienet: Fix race in axienet_stop net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN r8152: fix the firmware doesn't work fou: Fix null-ptr-deref in GRO. bareudp: Fix device stats updates. net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup bpf, net: Fix a potential race in do_sock_getsockopt() net: dqs: Do not use extern for unused dql_group sch/netem: fix use after free in netem_dequeue usbnet: modern method to get random MAC MAINTAINERS: wifi: cw1200: add net-cw1200.h ice: do not bring the VSI up, if it was down before the XDP setup ice: remove ICE_CFG_BUSY locking from AF_XDP code ...
2024-09-05Merge tag 'spi-fix-v6.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small driver specific fixes (including some of the widespread work on fixing missing ID tables for module autoloading and the revert of some problematic PM work in spi-rockchip), some improvements to the MAINTAINERS information for the NXP drivers and the addition of a new device ID to spidev" * tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi drivers MAINTAINERS: SPI: Add freescale lpspi maintainer information spi: spi-fsl-lpspi: Fix off-by-one in prescale max spi: spidev: Add missing spi_device_id for jg10309-01 spi: bcm63xx: Enable module autoloading spi: intel: Add check devm_kasprintf() returned value spi: spidev: Add an entry for elgin,jg10309-01 spi: rockchip: Resolve unbalanced runtime PM / system PM handling
2024-09-05Merge tag 'regulator-fix-v6.11-stub' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "A fix from Doug Anderson for a missing stub, required to fix the build for some newly added users of devm_regulator_bulk_get_const() in !REGULATOR configurations" * tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR
2024-09-05Merge tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull Rust fixes from Miguel Ojeda: "Toolchain and infrastructure: - Fix builds for nightly compiler users now that 'new_uninit' was split into new features by using an alternative approach for the code that used what is now called the 'box_uninit_write' feature - Allow the 'stable_features' lint to preempt upcoming warnings about them, since soon there will be unstable features that will become stable in nightly compilers - Export bss symbols too 'kernel' crate: - 'block' module: fix wrong usage of lockdep API 'macros' crate: - Provide correct provenance when constructing 'THIS_MODULE' Documentation: - Remove unintended indentation (blockquotes) in generated output - Fix a couple typos MAINTAINERS: - Remove Wedson as Rust maintainer - Update Andreas' email" * tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux: MAINTAINERS: update Andreas Hindborg's email address MAINTAINERS: Remove Wedson as Rust maintainer rust: macros: provide correct provenance when constructing THIS_MODULE rust: allow `stable_features` lint docs: rust: remove unintended blockquote in Quick Start rust: alloc: eschew `Box<MaybeUninit<T>>::write` rust: kernel: fix typos in code comments docs: rust: remove unintended blockquote in Coding Guidelines rust: block: fix wrong usage of lockdep API rust: kbuild: fix export of bss symbols
2024-09-05Merge tag 'trace-v6.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix adding a new fgraph callback after function graph tracing has already started. If the new caller does not initialize its hash before registering the fgraph_ops, it can cause a NULL pointer dereference. Fix this by adding a new parameter to ftrace_graph_enable_direct() passing in the newly added gops directly and not rely on using the fgraph_array[], as entries in the fgraph_array[] must be initialized. Assign the new gops to the fgraph_array[] after it goes through ftrace_startup_subops() as that will properly initialize the gops->ops and initialize its hashes. - Fix a memory leak in fgraph storage memory test. If the "multiple fgraph storage on a function" boot up selftest fails in the registering of the function graph tracer, it will not free the memory it allocated for the filter. Break the loop up into two where it allocates the filters first and then registers the functions where any errors will do the appropriate clean ups. - Only clear the timerlat timers if it has an associated kthread. In the rtla tool that uses timerlat, if it was killed just as it was shutting down, the signals can free the kthread and the timer. But the closing of the timerlat files could cause the hrtimer_cancel() to be called on the already freed timer. As the kthread variable is is set to NULL when the kthreads are stopped and the timers are freed it can be used to know not to call hrtimer_cancel() on the timer if the kthread variable is NULL. - Use a cpumask to keep track of osnoise/timerlat kthreads The timerlat tracer can use user space threads for its analysis. With the killing of the rtla tool, the kernel can get confused between if it is using a user space thread to analyze or one of its own kernel threads. When this confusion happens, kthread_stop() can be called on a user space thread and bad things happen. As the kernel threads are per-cpu, a bitmask can be used to know when a kernel thread is used or when a user space thread is used. - Add missing interface_lock to osnoise/timerlat stop_kthread() The stop_kthread() function in osnoise/timerlat clears the osnoise kthread variable, and if it was a user space thread does a put_task on it. But this can race with the closing of the timerlat files that also does a put_task on the kthread, and if the race happens the task will have put_task called on it twice and oops. - Add cond_resched() to the tracing_iter_reset() loop. The latency tracers keep writing to the ring buffer without resetting when it issues a new "start" event (like interrupts being disabled). When reading the buffer with an iterator, the tracing_iter_reset() sets its pointer to that start event by walking through all the events in the buffer until it gets to the time stamp of the start event. In the case of a very large buffer, the loop that looks for the start event has been reported taking a very long time with a non preempt kernel that it can trigger a soft lock up warning. Add a cond_resched() into that loop to make sure that doesn't happen. - Use list_del_rcu() for eventfs ei->list variable It was reported that running loops of creating and deleting kprobe events could cause a crash due to the eventfs list iteration hitting a LIST_POISON variable. This is because the list is protected by SRCU but when an item is deleted from the list, it was using list_del() which poisons the "next" pointer. This is what list_del_rcu() was to prevent. * tag 'trace-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread() tracing/timerlat: Only clear timer if a kthread exists tracing/osnoise: Use a cpumask to know what threads are kthreads eventfs: Use list_del_rcu() for SRCU protected list variable tracing: Avoid possible softlockup in tracing_iter_reset() tracing: Fix memory leak in fgraph storage selftest tracing: fgraph: Fix to add new fgraph_ops to array after ftrace_startup_subops()
2024-09-05ila: call nf_unregister_net_hooks() soonerEric Dumazet
syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_init+0x359/0x610 net/core/net_namespace.c:139 setup_net+0x515/0xca0 net/core/net_namespace.c:343 copy_net_ns+0x4e2/0x7b0 net/core/net_namespace.c:508 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x619/0xc10 kernel/fork.c:3328 __do_sys_unshare kernel/fork.c:3399 [inline] __se_sys_unshare kernel/fork.c:3397 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3397 page last free pid 11846 tgid 11846 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1094 [inline] free_unref_page+0xd22/0xea0 mm/page_alloc.c:2612 __folio_put+0x2c8/0x440 mm/swap.c:128 folio_put include/linux/mm.h:1486 [inline] free_large_kmalloc+0x105/0x1c0 mm/slub.c:4565 kfree+0x1c4/0x360 mm/slub.c:4588 rhashtable_free_and_destroy+0x7c6/0x920 lib/rhashtable.c:1169 ila_xlat_exit_net+0x55/0x110 net/ipv6/ila/ila_xlat.c:626 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x802/0xcc0 net/core/net_namespace.c:640 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Memory state around the buggy address: ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05tools/net/ynl: fix cli.py --subscribe featureArkadiusz Kubalewski
Execution of command: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml / --subscribe "monitor" --sleep 10 fails with: File "/repo/./tools/net/ynl/cli.py", line 109, in main ynl.check_ntf() File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf op = self.rsp_by_value[nl_msg.cmd()] KeyError: 19 Parsing Generic Netlink notification messages performs lookup for op in the message. The message was not yet decoded, and is not yet considered GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13). Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the op was not passed to the decode function, thus allow parsing of Generic Netlink notifications without causing the failure. Suggested-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/ Fixes: 0a966d606c68 ("tools/net/ynl: Fix extack decoding for directional ops") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05MAINTAINERS: fix ptp ocp driver maintainers addressVadim Fedorenko
While checking the latest series for ptp_ocp driver I realised that MAINTAINERS file has wrong item about email on linux.dev domain. Fixes: 795fd9342c62 ("ptp_ocp: adjust MAINTAINERS and mailmap") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240904131855.559078-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05selftests: net: enable bind testsJamie Bainbridge
bind_wildcard is compiled but not run, bind_timewait is not compiled. These two tests complete in a very short time, use the test harness properly, and seem reasonable to enable. The author of the tests confirmed via email that these were intended to be run. Enable these two tests. Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Fixes: 2c042e8e54ef ("tcp: Add selftest for bind() and TIME_WAIT.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi driversFrank Li
Add mailing list imx@lists.linux.dev for nxp spi drivers(qspi, fspi and dspi). Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905155230.1901787-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05MAINTAINERS: SPI: Add freescale lpspi maintainer informationFrank Li
Add imx@lists.linux.dev and NXP maintainer information for lpspi driver (drivers/spi/spi-fsl-lpspi.c). Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905154124.1901311-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05Merge tag 'platform-drivers-x86-v6.11-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - amd/pmf: ASUS GA403 quirk matching tweak - dell-smbios: Fix to the init function rollback path * tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/amd: pmf: Make ASUS GA403 quirk generic platform/x86: dell-smbios: Fix error path in dell_smbios_init()
2024-09-05Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fix fromShuah Khan: "One single fix to a use-after-free bug resulting from kunit_driver_create() failing to copy the driver name leaving it on the stack or freeing it" * tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Device wrappers should also manage driver name
2024-09-05tracing/timerlat: Add interface_lock around clearing of kthread in ↵Steven Rostedt
stop_kthread() The timerlat interface will get and put the task that is part of the "kthread" field of the osn_var to keep it around until all references are released. But here's a race in the "stop_kthread()" code that will call put_task_struct() on the kthread if it is not a kernel thread. This can race with the releasing of the references to that task struct and the put_task_struct() can be called twice when it should have been called just once. Take the interface_lock() in stop_kthread() to synchronize this change. But to do so, the function stop_per_cpu_kthreads() needs to change the loop from for_each_online_cpu() to for_each_possible_cpu() and remove the cpu_read_lock(), as the interface_lock can not be taken while the cpu locks are held. The only side effect of this change is that it may do some extra work, as the per_cpu variables of the offline CPUs would not be set anyway, and would simply be skipped in the loop. Remove unneeded "return;" in stop_kthread(). Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing/timerlat: Only clear timer if a kthread existsSteven Rostedt
The timerlat tracer can use user space threads to check for osnoise and timer latency. If the program using this is killed via a SIGTERM, the threads are shutdown one at a time and another tracing instance can start up resetting the threads before they are fully closed. That causes the hrtimer assigned to the kthread to be shutdown and freed twice when the dying thread finally closes the file descriptors, causing a use-after-free bug. Only cancel the hrtimer if the associated thread is still around. Also add the interface_lock around the resetting of the tlat_var->kthread. Note, this is just a quick fix that can be backported to stable. A real fix is to have a better synchronization between the shutdown of old threads and the starting of new ones. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing/osnoise: Use a cpumask to know what threads are kthreadsSteven Rostedt
The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthreads are created based on global behavior, use a cpumask to know when kthreads are running and that they need to be shutdown before proceeding to do new work. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/ This was debugged by using the persistent ring buffer: Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/ Note, locking was originally used to fix this, but that proved to cause too many deadlocks to work around: https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05eventfs: Use list_del_rcu() for SRCU protected list variableSteven Rostedt
Chi Zhiling reported: We found a null pointer accessing in tracefs[1], the reason is that the variable 'ei_child' is set to LIST_POISON1, that means the list was removed in eventfs_remove_rec. so when access the ei_child->is_freed, the panic triggered. by the way, the following script can reproduce this panic loop1 (){ while true do echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events echo "" > /sys/kernel/debug/tracing/kprobe_events done } loop2 (){ while true do tree /sys/kernel/debug/tracing/events/kprobes/ done } loop1 & loop2 [1]: [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150 [ 1147.968239][T17331] Mem abort info: [ 1147.971739][T17331] ESR = 0x0000000096000004 [ 1147.976172][T17331] EC = 0x25: DABT (current EL), IL = 32 bits [ 1147.982171][T17331] SET = 0, FnV = 0 [ 1147.985906][T17331] EA = 0, S1PTW = 0 [ 1147.989734][T17331] FSC = 0x04: level 0 translation fault [ 1147.995292][T17331] Data abort info: [ 1147.998858][T17331] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1148.005023][T17331] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1148.010759][T17331] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls] [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G W ------- ---- 6.6.43 #2 [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650 [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020 [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398 [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398 [ 1148.115969][T17331] sp : ffff80008d56bbd0 [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000 [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100 [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10 [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000 [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0 [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0 [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862 [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068 [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001 [ 1148.198131][T17331] Call trace: [ 1148.201259][T17331] eventfs_iterate+0x2c0/0x398 [ 1148.205864][T17331] iterate_dir+0x98/0x188 [ 1148.210036][T17331] __arm64_sys_getdents64+0x78/0x160 [ 1148.215161][T17331] invoke_syscall+0x78/0x108 [ 1148.219593][T17331] el0_svc_common.constprop.0+0x48/0xf0 [ 1148.224977][T17331] do_el0_svc+0x24/0x38 [ 1148.228974][T17331] el0_svc+0x40/0x168 [ 1148.232798][T17331] el0t_64_sync_handler+0x120/0x130 [ 1148.237836][T17331] el0t_64_sync+0x1a4/0x1a8 [ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f9000676 (b9405300) [ 1148.248955][T17331] ---[ end trace 0000000000000000 ]--- The issue is that list_del() is used on an SRCU protected list variable before the synchronization occurs. This can poison the list pointers while there is a reader iterating the list. This is simply fixed by using list_del_rcu() that is specifically made for this purpose. Link: https://lore.kernel.org/linux-trace-kernel/20240829085025.3600021-1-chizhiling@163.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20240904131605.640d42b1@gandalf.local.home Fixes: 43aa6f97c2d03 ("eventfs: Get rid of dentry pointers without refcounts") Reported-by: Chi Zhiling <chizhiling@kylinos.cn> Tested-by: Chi Zhiling <chizhiling@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing: Avoid possible softlockup in tracing_iter_reset()Zheng Yejian
In __tracing_open(), when max latency tracers took place on the cpu, the time start of its buffer would be updated, then event entries with timestamps being earlier than start of the buffer would be skipped (see tracing_iter_reset()). Softlockup will occur if the kernel is non-preemptible and too many entries were skipped in the loop that reset every cpu buffer, so add cond_resched() to avoid it. Cc: stable@vger.kernel.org Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces") Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05spi: spi-fsl-lpspi: Fix off-by-one in prescale maxStefan Wahren
The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register") doesn't implement the prescaler maximum as intended. The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP it should be 7. So this needs also a adjustment of the comparison in the scldiv calculation. Fixes: 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05net: dsa: vsc73xx: fix possible subblocks range of CAPT blockPawel Dembicki
CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7. Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this moment. This patch fix it. Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240903203340.1518789-1-paweldembicki@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05sched: sch_cake: fix bulk flow accounting logic for host fairnessToke Høiland-Jørgensen
In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that. Fixes: 712639929912 ("sch_cake: Make the dual modes fairer") Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05docs: netdev: document guidance on cleanup.hJakub Kicinski
Document what was discussed multiple times on list and various virtual / in-person conversations. guard() being okay in functions <= 20 LoC is a bit of my own invention. If the function is trivial it should be fine, but feel free to disagree :) We'll obviously revisit this guidance as time passes and we and other subsystems get more experience. Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240830171443.3532077-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-04Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== ice: fix synchronization between .ndo_bpf() and reset Larysa Zaremba says: PF reset can be triggered asynchronously, by tx_timeout or by a user. With some unfortunate timings both ice_vsi_rebuild() and .ndo_bpf will try to access and modify XDP rings at the same time, causing system crash. The first patch factors out rtnl-locked code from VSI rebuild code to avoid deadlock. The following changes lock rebuild and .ndo_bpf() critical sections with an internal mutex as well and provide complementary fixes. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: do not bring the VSI up, if it was down before the XDP setup ice: remove ICE_CFG_BUSY locking from AF_XDP code ice: check ICE_VSI_DOWN under rtnl_lock when preparing for reset ice: check for XDP rings instead of bpf program when unconfiguring ice: protect XDP configuration with a mutex ice: move netif_queue_set_napi to rtnl-protected sections ==================== Link: https://patch.msgid.link/20240903183034.3530411-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04Merge tag 'wireless-2024-09-04' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.11 Hopefully final fixes for v6.11 and this time only fixes to ath11k driver. We need to revert hibernation support due to reported regressions and we have a fix for kernel crash introduced in v6.11-rc1. * tag 'wireless-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: MAINTAINERS: wifi: cw1200: add net-cw1200.h Revert "wifi: ath11k: support hibernation" Revert "wifi: ath11k: restore country code during resume" wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power() ==================== Link: https://patch.msgid.link/20240904135906.5986EC4CECA@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04net: xilinx: axienet: Fix race in axienet_stopSean Anderson
axienet_dma_err_handler can race with axienet_stop in the following manner: CPU 1 CPU 2 ====================== ================== axienet_stop() napi_disable() axienet_dma_stop() axienet_dma_err_handler() napi_disable() axienet_dma_stop() axienet_dma_start() napi_enable() cancel_work_sync() free_irq() Fix this by setting a flag in axienet_stop telling axienet_dma_err_handler not to bother doing anything. I chose not to use disable_work_sync to allow for easier backporting. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04net: bridge: br_fdb_external_learn_add(): always set EXT_LEARNJonas Gorski
When userspace wants to take over a fdb entry by setting it as EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add(). If the bridge updates the entry later because its port changed, we clear the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER flag set. If userspace then wants to take over the entry again, br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the update. Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless if this was a user fdb entry or not. Fixes: 710ae7287737 ("net: bridge: Mark FDB entries that were added by user as such") Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04r8152: fix the firmware doesn't workHayes Wang
generic_ocp_write() asks the parameter "size" must be 4 bytes align. Therefore, write the bp would fail, if the mac->bp_num is odd. Align the size to 4 for fixing it. The way may write an extra bp, but the rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose index is more than mac->bp_num. That is, there is no influence for the firmware. Besides, I check the return value of generic_ocp_write() to make sure everything is correct. Fixes: e5c266a61186 ("r8152: set bp in bulk") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04fou: Fix null-ptr-deref in GRO.Kuniyuki Iwashima
We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) </IRQ> do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64 RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044 R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001 R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000 ? sched_clock_cpu (kernel/sched/clock.c:371) acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3)) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237) cpuidle_enter (drivers/cpuidle/cpuidle.c:353) cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239) do_idle (kernel/sched/idle.c:302) cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1)) start_kernel (init/main.c:1048) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310) Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel CR2: 0000000000000008 Fixes: d92283e338f6 ("fou: change to use UDP socket GRO") Reported-by: Alphonse Kurian <alkurian@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04bareudp: Fix device stats updates.Guillaume Nault
Bareudp devices update their stats concurrently. Therefore they need proper atomic increments. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04Merge tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: - Fix a typo in the rebalance accounting changes - BCH_SB_MEMBER_INVALID: small on disk format feature which will be needed for full erasure coding support; this is only the minimum so that 6.11 can handle future versions without barfing. * tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefs: bcachefs: BCH_SB_MEMBER_INVALID bcachefs: fix rebalance accounting
2024-09-04Merge tag 'perf-tools-fixes-for-v6.11-2024-09-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A number of small fixes for the late cycle: - Two more build fixes on 32-bit archs - Fixed a segfault during perf test - Fixed spinlock/rwlock accounting bug in perf lock contention" * tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf daemon: Fix the build on more 32-bit architectures perf python: include "util/sample.h" perf lock contention: Fix spinlock and rwlock accounting perf test pmu: Set uninitialized PMU alias to null
2024-09-04Merge tag 'hwmon-for-v6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - hp-wmi-sensors: Check if WMI event data exists before accessing it - ltc2991: fix register bits defines * tag 'hwmon-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (hp-wmi-sensors) Check if WMI event data exists hwmon: ltc2991: fix register bits defines
2024-09-04Merge tag 'for-6.11-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - followup fix for direct io and fsync under some conditions, reported by QEMU users - fix a potential leak when disabling quotas while some extent tracking work can still happen - in zoned mode handle unexpected change of zone write pointer in RAID1-like block groups, turn the zones to read-only * tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix race between direct IO write and fsync when using same fd btrfs: zoned: handle broken write pointer on zones btrfs: qgroup: don't use extent changeset when not needed
2024-09-04Merge tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Fix crash in session setup - Fix locking bug - Improve access bounds checking * tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd: ksmbd: Unlock on in ksmbd_tcp_set_interfaces() ksmbd: unset the binding mark of a reused connection smb: Annotate struct xattr_smb_acl with __counted_by()
2024-09-04Merge tag 'vfs-6.11-rc7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "Two netfs fixes for this merge window: - Ensure that fscache_cookie_lru_time is deleted when the fscache module is removed to prevent UAF - Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range() Before it used truncate_inode_pages_partial() which causes copy_file_range() to fail on cifs" * tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
2024-09-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linuxLinus Torvalds
Pull ARM fix from Russell King: - Fix a build issue with older binutils with LD dead code elimination disabled * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION
2024-09-04Merge tag 'parisc-for-6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fix from Helge Deller: - Fix boot issue where boot memory is marked read-only too early * tag 'parisc-for-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Delay write-protection until mark_rodata_ro() call
2024-09-04Merge tag 'mm-hotfixes-stable-2024-09-03-20-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes, 15 of which are cc:stable. Mostly MM, no identifiable theme. And a few nilfs2 fixups" * tag 'mm-hotfixes-stable-2024-09-03-20-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: alloc_tag: fix allocation tag reporting when CONFIG_MODULES=n mm: vmalloc: optimize vmap_lazy_nr arithmetic when purging each vmap_area mailmap: update entry for Jan Kuliga codetag: debug: mark codetags for poisoned page as empty mm/memcontrol: respect zswap.writeback setting from parent cg too scripts: fix gfp-translate after ___GFP_*_BITS conversion to an enum Revert "mm: skip CMA pages when they are not available" maple_tree: remove rcu_read_lock() from mt_validate() kexec_file: fix elfcorehdr digest exclusion when CONFIG_CRASH_HOTPLUG=y mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook nilfs2: fix state management in error path of log writing function nilfs2: fix missing cleanup on rollforward recovery error nilfs2: protect references to superblock parameters exposed in sysfs userfaultfd: don't BUG_ON() if khugepaged yanks our page table userfaultfd: fix checks for huge PMDs mm: vmalloc: ensure vmap_block is initialised before adding to queue selftests: mm: fix build errors on armhf
2024-09-04ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATIONYuntao Liu
There is a build issue with LD segmentation fault, while CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow. scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault (core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive ${objs} ${wl}--no-whole-archive ${wl}--start-group ${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs} The error occurs in older versions of the GNU ld with version earlier than 2.36. It makes most sense to have a minimum LD version as a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate the impact of ".reloc .text, R_ARM_NONE, ." when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled. Fixes: ed0f94102251 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION") Reported-by: Harith George <mail2hgg@gmail.com> Tested-by: Harith George <mail2hgg@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com> Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/ Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2024-09-04net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanupSouradeep Chakrabarti
Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80 Cc: stable@vger.kernel.org Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ") Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-03bcachefs: BCH_SB_MEMBER_INVALIDKent Overstreet
Create a sentinal value for "invalid device". This is needed for removing devices that have stripes on them (force removing, without evacuating); we need a sentinal value for the stripe pointers to the device being removed. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-09-03MAINTAINERS: update Andreas Hindborg's email addressrust-fixes-6.11-2Andreas Hindborg
Move away from corporate infrastructure for upstream work. Also update mailmap. Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20240903200956.68231-1-a.hindborg@kernel.org [ Reworded title slightly. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 04:48:53 +0000