summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-21Merge branch 'slab/for-6.3/fixes' into slab/for-linusVlastimil Babka
Two fixes for SLAB and SLUB - Make it possible to use kmem_cache_alloc_bulk() early in boot when interrupts are not yet enabled, as code doing that start to appear via the maple tree (by Thomas Gleixner). - Fix debugfs-related memory leak (by Greg Kroah-Hartman).
2023-02-21Merge branch 'slab/for-6.3/cleanups' into slab/for-linusVlastimil Babka
A bunch of cleanups for SLAB and SLUB: - Use the standard idiom to get head page of folio (by SeongJae Park) - Simplify and inline is_debug_pagealloc_cache() in SLAB (by lvqian) - Remove unused variable in SLAB (by Gou Hao)
2023-02-08mm, slab/slub: Ensure kmem_cache_alloc_bulk() is available earlyThomas Gleixner
The memory allocators are available during early boot even in the phase where interrupts are disabled and scheduling is not yet possible. The setup is so that GFP_KERNEL allocations work in this phase without causing might_alloc() splats to be emitted because the system state is SYSTEM_BOOTING at that point which prevents the warnings to trigger. Most allocation/free functions use local_irq_save()/restore() or a lock variant of that. But kmem_cache_alloc_bulk() and kmem_cache_free_bulk() use local_[lock]_irq_disable()/enable(), which leads to a lockdep warning when interrupts are enabled during the early boot phase. This went unnoticed so far as there are no early users of these interfaces. The upcoming conversion of the interrupt descriptor store from radix_tree to maple_tree triggered this warning as maple_tree uses the bulk interface. Cure this by moving the kmem_cache_alloc/free() bulk variants of SLUB and SLAB to local[_lock]_irq_save()/restore(). There is obviously no reclaim possible and required at this point so there is no need to expand this coverage further. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-02-06mm/slub: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-01-13mm/slab.c: cleanup is_debug_pagealloc_cache()lvqian
Remove the if statement to increase code readability. Also make the function inline, per David. Signed-off-by: lvqian <lvqian@nfschina.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-01-13mm/sl{a,u}b: fix wrong usages of folio_page() for getting head pagesSeongJae Park
The standard idiom for getting head page of a given folio is '&folio->page', but some are wrongly using 'folio_page(folio, 0)' for the purpose. Fix those to use the idiom. Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-01-02mm/slab: remove unused slab_early_initGou Hao
'slab_early_init' was introduced by 'commit e0a42726794f ("[PATCH] mm/slab.c: fix early init assumption")', this flag was used to prevent off-slab caches being created so early during bootup. The only user of 'slab_early_init' was removed in 'commit 3217fd9bdf00 ("mm/slab: make criteria for off slab determination robust and simple")'. Signed-off-by: Gou Hao <gouhao@uniontech.com> Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-01-02mm, slab: periodically resched in drain_freelist()David Rientjes
drain_freelist() can be called with a very large number of slabs to free, such as for kmem_cache_shrink(), or depending on various settings of the slab cache when doing periodic reaping. If there is a potentially long list of slabs to drain, periodically schedule to ensure we aren't saturating the cpu for too long. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-01-01Linux 6.2-rc2v6.2-rc2Linus Torvalds
2023-01-01Merge tag 'perf_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Pass only an initialized perf event attribute to the LSM hook - Fix a use-after-free on the perf syscall's error path - A potential integer overflow fix in amd_core_pmu_init() - Fix the cgroup events tracking after the context handling rewrite - Return the proper value from the inherit_event() function on error * tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Call LSM hook after copying perf_event_attr perf: Fix use-after-free in error path perf/x86/amd: fix potential integer overflow on shift of a int perf/core: Fix cgroup events tracking perf core: Return error pointer if inherit_event() fails to find pmu_ctx
2023-01-01Merge tag 'x86_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Two fixes to correct how kprobes handles INT3 now that they're added by other functionality like the rethunks and not only kgdb - Remove __init section markings of two functions which are referenced by a function in the .text section * tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK x86/calldepth: Fix incorrect init section references
2023-01-01Merge tag 'locking_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Prevent the leaking of a debug timer in futex_waitv() - A preempt-RT mutex locking fix, adding the proper acquire semantics * tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
2023-01-01Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "I'm just back from the mountains, and Dave is out at the beach and should be back in a week again. Just i915 fixes and since Rodrigo bothered to make the pull last week I figured I should warm up gpg and forward this in a nice signed tag as a new years present! - i915 fixes for newer platforms - i915 locking rework to not give up in vm eviction fallback path too early" * tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm: drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence drm/i915/uc: Fix two issues with over-size firmware files drm/i915: improve the catch-all evict to handle lock contention drm/i915: Remove __maybe_unused from mtl_info drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
2023-01-01Merge tag 'drm-intel-fixes-2022-12-30' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - fix TLB invalidation for DG2 and newer platforms. (Andrzej) - Remove __maybe_unused from mtl_info (Lucas) - improve the catch-all evict to handle lock contention (Matt Auld) - Fix two issues with over-size (GuC/HuC) firmware files (John) - Fix DSI resume issues on ICL+ (Jani) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
2022-12-31Merge tag 'kbuild-fixes-v6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix broken BuildID - Add srcrpm-pkg to the help message - Fix the option order for modpost built with musl libc - Fix the build dependency of rpm-pkg for openSUSE * tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: fixdep: remove unneeded <stdarg.h> inclusion kbuild: sort single-targets alphabetically again kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires kbuild: Fix running modpost with musl libc kbuild: add a missing line for help message .gitignore: ignore *.rpm arch: fix broken BuildID for arm64 and riscv kconfig: Add static text for search information in help menu
2022-12-31Merge tag 'ata-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: "A single fix to address an issue with wake from suspend with PCS adapters, from Adam" * tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci: Fix PCS quirk application for suspend
2022-12-30Merge tag 'acpi-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix) support adjustments and ACPI backlight handling fixes, mostly for platforms using AMD chips. Specifics: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865 and stop using AMD-specific low-power S0 idle code path for systems with Rembrandt chips and newer (Mario Limonciello)" * tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+ ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865 ACPI: video: Fix Apple GMUX backlight detection ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
2022-12-30Merge tag 'sound-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few small fixes: - A regression fix for HDMI audio on HD-audio AMD codecs - Fixes for LINE6 MIDI handling - HD-audio quirk for Dell laptops" * tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops ALSA: line6: fix stack overflow in line6_midi_transmit ALSA: line6: correct midi status byte when receiving data from podxt
2022-12-30Merge branches 'acpi-resource' and 'acpi-video'Rafael J. Wysocki
Merge ACPI resource handling quirks and ACPI backlight handling fixes for 6.2-rc2: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). * acpi-resource: ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 * acpi-video: ACPI: video: Fix Apple GMUX backlight detection ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
2022-12-30drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO indexJani Nikula
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1, never 0. Fix the sloppiest commit in recent memory. Fixes: 963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com (cherry picked from commit a561933c571798868b5fa42198427a7e6df56c09) Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-30drm/i915/dsi: add support for ICL+ native MIPI GPIO sequenceJani Nikula
Starting from ICL, the default for MIPI GPIO sequences seems to be using native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse many pins that quite frankly seem scary to poke based on the VBT sequences. We pretty much have to trust that the board is configured such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for anything else. MIPI sequence v4 also adds a flag to fall back to non-native sequences. v5: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler() too (Ville) - References instead of Closes issue 6131 because this does not fix everything v4: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville) v3: - Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>) v2: - Fix HPD pin output set (impacts GPIOs 0 and 5) - Fix GPIO data output direction set (impacts GPIOs 4 and 9) - Reduce register accesses to single intel_de_rwm() References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com (cherry picked from commit f087cfe6fcff58044f7aa3b284965af47f472fb0) Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-30fixdep: remove unneeded <stdarg.h> inclusionMasahiro Yamada
This is unneeded since commit 69304379ff03 ("fixdep: use fflush() and ferror() to ensure successful write to files"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-30kbuild: sort single-targets alphabetically againMasahiro Yamada
This was previously alphabetically sorted. Sort it again. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2022-12-30kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequiresMasahiro Yamada
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f959b ("kbuild: add ability to make source rpm buildable using koji"). The relevant package name in openSUSE is libelf-devel. Add it as an alternative package. BTW, if it is impossible to solve the build requirement, the final resort would be: $ make RPMOPTS=--nodeps rpm-pkg This passes --nodeps to the rpmbuild command so it will not verify build dependencies. This is useful to test rpm builds on non-rpm system. On Debian/Ubuntu, for example, you can install rpmbuild by 'apt-get install rpm'. NOTE1: Likewise, it is possible to bypass the build dependency check for debian package builds: $ make DPKG_FLAGS=-d deb-pkg NOTE2: The 'or' operator is supported since RPM 4.13. So, old distros such as CentOS 7 will break. I suggest installing newer rpmbuild in such cases. Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u Fixes: 8818039f959b ("kbuild: add ability to make source rpm buildable using koji") Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jonathan Toppins <jtoppins@redhat.com>
2022-12-30kbuild: Fix running modpost with musl libcSamuel Holland
commit 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule") moved 'vmlinux.o' inside modpost-args, possibly before some of the other options. However, getopt() in musl libc follows POSIX and stops looking for options upon reaching the first non-option argument. As a result, the '-T' option is misinterpreted as a positional argument, and the build fails: make -f ./scripts/Makefile.modpost scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order -T: No such file or directory make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1 make: *** [Makefile:1960: modpost] Error 2 The fix is to move all options before 'vmlinux.o' in modpost-args. Fixes: 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-30kbuild: add a missing line for help messageJun ASAKA
The help message line for building the source RPM package was missing. Added it. Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-30.gitignore: ignore *.rpmMasahiro Yamada
Previously, *.rpm files were created under $HOME/rpmbuild/, but since commit 8818039f959b ("kbuild: add ability to make source rpm buildable using koji"), srcrpm-pkg creates the source rpm in the kernel tree because it sets '_srcrpmdir'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-30arch: fix broken BuildID for arm64 and riscvMasahiro Yamada
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux since commit 994b7ac1697b ("arm64: remove special treatment for the link order of head.o"). The issue is that the type of .notes section, which contains the BuildID, changed from NOTES to PROGBITS. Ard Biesheuvel figured out that whichever object gets linked first gets to decide the type of a section. The PROGBITS type is the result of the compiler emitting .note.GNU-stack as PROGBITS rather than NOTE. While Ard provided a fix for arm64, I want to fix this globally because the same issue is happening on riscv since commit 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o"). This problem will happen in general for other architectures if they start to drop unneeded entries from scripts/head-object-list.txt. Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h. Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/ Fixes: 994b7ac1697b ("arm64: remove special treatment for the link order of head.o") Fixes: 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o") Reported-by: Dennis Gilmore <dennis@ausil.us> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-12-30drm/i915/uc: Fix two issues with over-size firmware filesJohn Harrison
In the case where a firmware file is too large (e.g. someone downloaded a web page ASCII dump from github...), the firmware object is released but the pointer is not zerod. If no other firmware file was found then release would be called again leading to a double kfree. Also, the size check was only being applied to the initial firmware load not any of the subsequent attempts. So move the check into a wrapper that is used for all loads. Fixes: 016241168dc5 ("drm/i915/uc: use different ggtt pin offsets for uc loads") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com (cherry picked from commit 4071d98b296a5bc5fd4b15ec651bd05800ec9510) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-30drm/i915: improve the catch-all evict to handle lock contentionMatthew Auld
The catch-all evict can fail due to object lock contention, since it only goes as far as trylocking the object, due to us already holding the vm->mutex. Doing a full object lock here can deadlock, since the vm->mutex is always our inner lock. Add another execbuf pass which drops the vm->mutex and then tries to grab the object will the full lock, before then retrying the eviction. This should be good enough for now to fix the immediate regression with userspace seeing -ENOSPC from execbuf due to contended object locks during GTT eviction. v2 (Mani) - Also revamp the docs for the different passes. Testcase: igt@gem_ppgtt@shrink-vs-evict-* Fixes: 7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.") References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627 References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570 References: https://bugzilla.mozilla.org/show_bug.cgi?id=1779558 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Mani Milani <mani@chromium.org> Cc: <stable@vger.kernel.org> # v5.18+ Reviewed-by: Mani Milani <mani@chromium.org> Tested-by: Mani Milani <mani@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com (cherry picked from commit 801fa7a81f6da533cc5442fc40e32c72b76cd42a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-30drm/i915: Remove __maybe_unused from mtl_infoLucas De Marchi
The attribute __maybe_unused should remain only until the respective info is not in the pciidlist. The info can't be added together with its definition because that would cause the driver to automatically probe for the device, while it's still not ready for that. However once pciidlist contains it, the attribute can be removed. Fixes: 7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs") Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com (cherry picked from commit 50490ce05b7a50b0bd4108fa7d6db3ca2972fa83) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-30drm/i915: fix TLB invalidation for Gen12.50 video and compute enginesAndrzej Hajda
In case of Gen12.50 video and compute engines, TLB_INV registers are masked - to modify one bit, corresponding bit in upper half of the register must be enabled, otherwise nothing happens. Fixes: 77fa9efc16a9 ("drm/i915/xehp: Create separate reg definitions for new MCR registers") Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com (cherry picked from commit 4d5cf7b1680a1e6db327e3c935ef58325cbedb2c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-29Merge tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Mostly just NVMe, but also a single fixup for BFQ for a regression that happened during the merge window. In detail: - NVMe pull requests via Christoph: - Fix doorbell buffer value endianness (Klaus Jensen) - Fix Linux vs NVMe page size mismatch (Keith Busch) - Fix a potential use memory access beyong the allocation limit (Keith Busch) - Fix a multipath vs blktrace NULL pointer dereference (Yanjun Zhang) - Fix various problems in handling the Command Supported and Effects log (Christoph Hellwig) - Don't allow unprivileged passthrough of commands that don't transfer data but modify logical block content (Christoph Hellwig) - Add a features and quirks policy document (Christoph Hellwig) - Fix some really nasty code that was correct but made smatch complain (Sagi Grimberg) - Use-after-free regression in BFQ from this merge window (Yu)" * tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux: nvme-auth: fix smatch warning complaints nvme: consult the CSE log page for unprivileged passthrough nvme: also return I/O command effects from nvme_command_effects nvmet: don't defer passthrough commands with trivial effects to the workqueue nvmet: set the LBCC bit for commands that modify data nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition docs, nvme: add a feature and quirk policy document nvme-pci: update sqsize when adjusting the queue depth nvme: fix setting the queue depth in nvme_alloc_io_tag_set block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq nvme: fix multipath crash caused by flush request when blktrace is enabled nvme-pci: fix page size checks nvme-pci: fix mempool alloc size nvme-pci: fix doorbell buffer value endianness
2022-12-29Merge tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Two fixes for mutex grabbing when the task state is != TASK_RUNNING (me) - Check for invalid opcode in io_uring_register() a bit earlier, to avoid going through the quiesce machinery just to return -EINVAL later in the process (me) - Fix for the uapi io_uring header, skipping including time_types.h when necessary (Stefan) * tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux: uapi:io_uring.h: allow linux/time_types.h to be skipped io_uring: check for valid register opcode earlier io_uring/cancel: re-grab ctx mutex after finishing wait io_uring: finish waiting before flushing overflow entries
2022-12-29Merge tag 'linux-kselftest-kunit-fixes-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fix from Shuah Khan: - alloc_string_stream_fragment() error path fix to free before returning a failure. * tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: alloc_string_stream_fragment error handling bug fix
2022-12-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Changes that were posted too late for 6.1, or after the release. x86: - several fixes to nested VMX execution controls - fixes and clarification to the documentation for Xen emulation - do not unnecessarily release a pmu event with zero period - MMU fixes - fix Coverity warning in kvm_hv_flush_tlb() selftests: - fixes for the ucall mechanism in selftests - other fixes mostly related to compilation with clang" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits) KVM: selftests: restore special vmmcall code layout needed by the harness Documentation: kvm: clarify SRCU locking order KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET KVM: x86/xen: Documentation updates and clarifications KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi KVM: x86/xen: Simplify eventfd IOCTLs KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page() KVM: Delete extra block of "};" in the KVM API documentation kvm: x86/mmu: Remove duplicated "be split" in spte.h kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK() MAINTAINERS: adjust entry after renaming the vmx hyperv files KVM: selftests: Mark correct page as mapped in virt_map() KVM: arm64: selftests: Don't identity map the ucall MMIO hole KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap KVM: selftests: Use magic value to signal ucall_alloc() failure KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning KVM: selftests: Include lib.mk before consuming $(CC) KVM: selftests: Explicitly disable builtins for mem*() overrides ...
2022-12-29Merge tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme into block-6.2Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.2 - fix various problems in handling the Command Supported and Effects log (Christoph Hellwig) - don't allow unprivileged passthrough of commands that don't transfer data but modify logical block content (Christoph Hellwig) - add a features and quirks policy document (Christoph Hellwig) - fix some really nasty code that was correct but made smatch complain (Sagi Grimberg)" * tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme: nvme-auth: fix smatch warning complaints nvme: consult the CSE log page for unprivileged passthrough nvme: also return I/O command effects from nvme_command_effects nvmet: don't defer passthrough commands with trivial effects to the workqueue nvmet: set the LBCC bit for commands that modify data nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition docs, nvme: add a feature and quirk policy document
2022-12-29kconfig: Add static text for search information in help menuBhaskar Chowdhury
Add few static text to explain how one can bring up the search dialog box by pressing the forward slash key anywhere on this interface. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-28nvme-auth: fix smatch warning complaintsSagi Grimberg
When initializing auth context, there may be no secrets passed by the user. Make return code explicit when returning successfully. smatch warnings: drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-12-28nvme: consult the CSE log page for unprivileged passthroughChristoph Hellwig
Commands like Write Zeros can change the contents of a namespaces without actually transferring data. To protect against this, check the Commands Supported and Effects log is supported by the controller for any unprivileg command passthrough and refuse unprivileged passthrough if the command has any effects that can change data or metadata. Note: While the Commands Support and Effects log page has only been mandatory since NVMe 2.0, it is widely supported because Windows requires it for any command passthrough from userspace. Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28nvme: also return I/O command effects from nvme_command_effectsChristoph Hellwig
To be able to use the Commands Supported and Effects Log for allowing unprivileged passtrough, it needs to be corretly reported for I/O commands as well. Return the I/O command effects from nvme_command_effects, and also add a default list of effects for the NVM command set. For other command sets, the Commands Supported and Effects log is required to be present already. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28nvmet: don't defer passthrough commands with trivial effects to the workqueueChristoph Hellwig
Mask out the "Command Supported" and "Logical Block Content Change" bits and only defer execution of commands that have non-trivial effects to the workqueue for synchronous execution. This allows to execute admin commands asynchronously on controllers that provide a Command Supported and Effects log page, and will keep allowing to execute Write commands asynchronously once command effects on I/O commands are taken into account. Fixes: c1fef73f793b ("nvmet: add passthru code to process commands") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28nvmet: set the LBCC bit for commands that modify dataChristoph Hellwig
Write, Write Zeroes, Zone append and a Zone Reset through Zone Management Send modify the logical block content of a namespace, so make sure the LBCC bit is reported for them. Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-12-28nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding itChristoph Hellwig
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a single value to multiple array entries instead of repeated assignments. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-12-28nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definitionChristoph Hellwig
3 << 16 does not generate the correct mask for bits 16, 17 and 18. Use the GENMASK macro to generate the correct mask instead. Fixes: 84fef62d135b ("nvme: check admin passthru command effects") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28docs, nvme: add a feature and quirk policy documentChristoph Hellwig
This adds a document about what specification features are supported by the Linux NVMe driver, and what qualifies for a quirk if an implementation has problems following the specification. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2022-12-28ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecsTakashi Iwai
The recent code refactoring for HD-audio HDMI codec driver caused a regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire don't recognize HDMI outputs any longer while the direct output via ALSA raw access still works. The problem turned out that, after the code refactoring, the driver assumes only the dynamic PCM assignment, and when a PCM stream that still isn't assigned to any pin gets opened, the driver tries to assign any free converter to the PCM stream. This behavior is OK for Intel and other codecs, as they have arbitrary connections between pins and converters. OTOH, on AMD chips that have a 1:1 mapping between pins and converters, this may end up with blocking the open of the next PCM stream for the pin that is tied with the formerly taken converter. Also, with the code refactoring, more PCM streams are exposed than necessary as we assume all converters can be used, while this isn't true for AMD case. This may change the PCM stream assignment and confuse users as well. This patch fixes those problems by: - Introducing a flag spec->static_pcm_mapping, and if it's set, the driver applies the static mapping between pins and converters at the probe time - Limiting the number of PCM streams per pins, too; this avoids the superfluous PCM streams Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836 Co-developed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-12-28Merge branch 'kvm-late-6.1-fixes' into HEADPaolo Bonzini
x86: * several fixes to nested VMX execution controls * fixes and clarification to the documentation for Xen emulation * do not unnecessarily release a pmu event with zero period * MMU fixes * fix Coverity warning in kvm_hv_flush_tlb() selftests: * fixes for the ucall mechanism in selftests * other fixes mostly related to compilation with clang
2022-12-28KVM: selftests: restore special vmmcall code layout needed by the harnessPaolo Bonzini
Commit 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test because it placed a "pop rbp" instruction after vmmcall. While this is correct and mimics what is done in the VMX case, this particular test expects a ud2 instruction right after the vmmcall, so that it can skip over it in the L1 part of the test. Inline a suitably-modified version of vmmcall() to restore the functionality of the test. Fixes: 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()" Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20221130181147.9911-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-28Documentation: kvm: clarify SRCU locking orderPaolo Bonzini
Currently only the locking order of SRCU vs kvm->slots_arch_lock and kvm->slots_lock is documented. Extend this to kvm->lock since Xen emulation got it terribly wrong. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 10:42:33 +0000