| Age | Commit message (Collapse) | Author |
|---|
|
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
|
|
usleep_range() is a wrapper arount usleep_range_state() which hands in
TASK_UNTINTERRUPTIBLE as state argument.
Use already exising wrapper usleep_range(). No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-2-e98760256370@linutronix.de
|
|
next_expiry_recalc is the name of a function as well as the name of a
struct member of struct timer_base. This might lead to confusion.
Rename next_expiry_recalc() to timer_recalc_next_expiry(). No functional
change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-1-e98760256370@linutronix.de
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/clocksource updates from Daniel Lezcano:
- Add the DT binding for the rk3576 compatible (Detlev Casanova)
- Use for_each_available_child_of_node_scoped() to remove the
of_node_put() calls in the loop (Zhang Zekun)
- Add the ability to register external callbacks for suspend/resume on
ACPI PM driver and enable to turn it off when suspended (Marek
Maslanka)
- Use the devm_clk_get_enabled() variant on the ingenic timer (Huan
Yang)
- Add missing iounmap() on errors in msm_dt_timer_init() (Ankit
Agrawal)
- Add missing clk_disable_unprepare() in init routine error code path
on the asm9260 and the cadence_ttc timers (Gaosheng Cui)
- Use request_percpu_irq() instead of request_irq() in order to fix a
wrong address space access reported by sparse (Uros Bizjak)
- Fix comment format for the pmc_core_acpi_pm_timer_suspend_resume()
function (Marek Maslanka)
Link: https://lore.kernel.org/all/6054852d-975f-4e83-850e-815f263a40c5@linaro.org
|
|
pmc_core_acpi_pm_timer_suspend_resume function
Change incorrect kernel-doc comment to regular comment for the
pmc_core_acpi_pm_timer_suspend_resume function.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409031410.a9beukFc-lkp@intel.com/
Link: https://lore.kernel.org/r/20240904094753.1615549-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Use request_percpu_irq() instead of request_irq() to solve
the following sparse warning:
jcore-pit.c:173:40: warning: incorrect type in argument 5 (different address spaces)
jcore-pit.c:173:40: expected void *dev
jcore-pit.c:173:40: got struct jcore_pit [noderef] __percpu *static [assigned] [toplevel] jcore_pit_percpu
Compile tested only.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20240902104810.21080-1-ubizjak@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
ttc_setup_clockevent
Add the missing clk_disable_unprepare() before return in
ttc_setup_clockevent().
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240803064253.331946-3-cuigaosheng1@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
asm9260_timer_init
Add the missing clk_disable_unprepare() before return in
asm9260_timer_init().
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240803064253.331946-2-cuigaosheng1@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add the missing iounmap() when clock frequency fails to get read by the
of_property_read_u32() call, or if the call to msm_timer_init() fails.
Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer")
Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
Link: https://lore.kernel.org/r/20240820094603.103598-1-link@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Allow to disable ACPI PM Timer on suspend and enable on resume. A
disabled timer helps optimise power consumption when the system is
suspended. On resume the timer is only reactivated if it was activated
prior to suspend, so unless the ACPI PM timer is enabled in the BIOS,
this won't change anything.
The ACPI PM timer is used by Intel's iTCO/wdat_wdt watchdog to drive the
watchdog, so it doesn't need to run during suspend.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184208.1080710-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Provides the capability to register an external callback for the ACPI PM
timer, which is called during the suspend and resume processes.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184150.1079924-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
for_each_available_child_of_node_scoped()
for_each_available_child_of_node_scoped() can put the device_node
automatically. So, using it to make the code logic more simple and
remove the device_node clean up code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240807074655.52157-1-zhangzekun11@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add compatible string for Rockchip RK3576 timer.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240802214612.434179-9-detlev.casanova@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Global timers could be expired remotely when the target CPU is idle. After
a remote timer expiry, the remote timer_base->next_expiry value is updated
while holding the timer_base->lock. When the formerly idle CPU becomes
active at the same time and checks whether timers need to expire, this
check is done lockless as it is on the local CPU. This could lead to a data
race, which was reported by sysbot:
https://lore.kernel.org/r/000000000000916e55061f969e14@google.com
When the value is read lockless but changed by the remote CPU, only two non
critical scenarios could happen:
1) The already update value is read -> everything is perfect
2) The old value is read -> a superfluous timer soft interrupt is raised
The same situation could happen when enqueueing a new first pinned timer by
a remote CPU also with non critical scenarios:
1) The already update value is read -> everything is perfect
2) The old value is read -> when the CPU is idle, an IPI is executed
nevertheless and when the CPU isn't idle, the updated value will be visible
on the next tick and the timer might be late one jiffie.
As this is very unlikely to happen, the overhead of doing the check under
the lock is a way more effort, than a superfluous timer soft interrupt or a
possible 1 jiffie delay of the timer.
Document and annotate this non critical behavior in the code by using
READ/WRITE_ONCE() pair when accessing timer_base->next_expiry.
Reported-by: syzbot+bf285fcc0a048e028118@syzkaller.appspotmail.com
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20240829154305.19259-1-anna-maria@linutronix.de
Closes: https://lore.kernel.org/lkml/000000000000916e55061f969e14@google.com
|
|
msleep() and msleep_interruptible() add a jiffie to the requested timeout.
This extra jiffie was introduced to ensure that the timeout will not happen
earlier than specified.
Since the rework of the timer wheel, the enqueue path already takes care of
this. So the extra jiffie added by msleep*() is pointless now.
Remove this extra jiffie in msleep() and msleep_interruptible().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20240829074133.4547-1-anna-maria@linutronix.de
|
|
The timerslack_ns setting is used to specify how much the hardware
timers should be delayed, to potentially dispatch multiple timers in a
single interrupt. This is a performance optimization. Timers of
realtime tasks (having a realtime scheduling policy) should not be
delayed.
This logic was inconsitently applied to the hrtimers, leading to delays
of realtime tasks which used timed waits for events (e.g. condition
variables). Due to the downstream override of the slack for rt tasks,
the procfs reported incorrect (non-zero) timerslack_ns values.
This is changed by setting the timer_slack_ns task attribute to 0 for
all tasks with a rt policy. By that, downstream users do not need to
specially handle rt tasks (w.r.t. the slack), and the procfs entry
shows the correct value of "0". Setting non-zero slack values (either
via procfs or PR_SET_TIMERSLACK) on tasks with a rt policy is ignored,
as stated in "man 2 PR_SET_TIMERSLACK":
Timer slack is not applied to threads that are scheduled under a
real-time scheduling policy (see sched_setscheduler(2)).
The special handling of timerslack on rt tasks in downstream users
is removed as well.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240814121032.368444-2-felix.moessbauer@siemens.com
|
|
The two hrtimer_cpu_base_.*_expiry() functions are wrappers around the
locking functions and sparse complains about the missing counterpart.
Add sparse annotation to denote that this bevaviour is expected.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812105326.2240000-3-bigeasy@linutronix.de
|
|
timer_sync_wait_running() first releases two locks and then acquires
them again. This is unexpected and sparse complains about it.
Add sparse annotation for timer_sync_wait_running() to note that the
locking is expected.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812105326.2240000-2-bigeasy@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core
Pull updates for posix timers and related signal code from Frederic Weisbecker:
* Prepare posix timers selftests for upcoming changes:
- Check signal behaviour sanity against SIG_IGN
- Check signal behaviour sanity against timer
reprogramm/deletion
- Check SIGEV_NONE pending expiry read
- Check interval timer read on a pending SIGNAL
- Check correct overrun count after signal block/unblock
* Various consolidations:
- timer get/set
- signal queue
* Fixes:
- Correctly read SIGEV_NONE timers
- Forward expiry while reading expired interval timers
with pending signal
- Don't arm SIGEV_NONE timers
* Various cleanups all over the place
|
|
These really can be handled gracefully without killing the machine.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
The task pointer which is handed to dequeue_signal() is always current. The
argument along with the first comment about signalfd in that function is
confusing at best. Remove it and use current internally.
Update the stale comment for dequeue_signal() while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Rename posix_timer_event() to posix_timer_queue_signal() as this is what
the function is about.
Consolidate the requeue pending and deactivation updates into that function
as there is no point in doing this in all incarnations of posix timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Posix CPU timers are not updating k_itimer::it_active which makes it
impossible to base decisions in the common posix timer code on it.
Update it when queueing or dequeueing posix CPU timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
hrtimer based and CPU timers have their own way to install the new interval
and to reset overrun and signal handling related data.
Create a helper function and do the same operation for all variants.
This also makes the handling of the interval consistent. It's only stored
when the timer is actually armed, i.e. timer->it_value != 0. Before that it
was stored unconditionally for posix CPU timers and conditionally for the
other posix timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
No requirement for a real list. Spare a few bytes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Keeping the overrun count of the previous setup around is just wrong. The
new setting has nothing to do with the previous one and has to start from a
clean slate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
No point in doing this all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Avoid the late sighand lock/unlock dance when a timer is not armed to
enforce reevaluation of the timer base so that the process wide CPU timer
sampling can be disabled.
Do it right at the point where the arming decision is made which already
has sighand locked.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
A leftover from historical code which describes fiction.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
posix_cpu_timer_set() uses @val as variable for the current time. That's
confusing at best.
Use @now as anywhere else and rewrite the confusing comment about clock
sampling.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
There is no point in arming SIGEV_NONE timers as they never deliver a
signal. timer_gettime() is handling the expiry time correctly and that's
all SIGEV_NONE timers care about.
Prevent arming them and remove the expiry handler code which just disarms
them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Reuse the split out __posix_cpu_timer_get() function which does already the
right thing.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
This will be cleaned up in a follow up patch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
timer_gettime() must return the remaining time to the next expiry of a
timer or 0 if the timer is not armed and no signal pending, but posix CPU
timers fail to forward a timer which is already expired.
Add the required logic to address that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
There is no point to return the interval for timers which have been
disarmed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
In preparation for addressing issues in the timer_get() and timer_set()
functions of posix CPU timers.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
When a timer signal is blocked and later unblocked then one signal should
be delivered with the correct number of overruns since the timer was queued.
Validate that behaviour.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
timer_gettime() must return the correct expiry time for interval timers
even when the timer is not armed, which is the case when a signal is
pending but blocked.
Works correctly for regular posix timers, but not for posix CPU timers.
Add a selftest to validate the fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Posix timers with a delivery mode of SIGEV_NONE deliver no signals but the
remaining expiry time must be readable via timer_gettime() for both one
shot and interval timers.
That's implemented correctly for regular posix timers but broken for posix
CPU timers.
Add a self test so the fixes can be verified.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Add a test case to validate correct behaviour vs. timer reprogramming and
deletion.
The handling of queued signals in case of timer reprogramming or deletion
is inconsistent at best.
POSIX does not really specify the behaviour for that:
- "The effect of disarming or resetting a timer with pending expiration
notifications is unspecified."
- "The disposition of pending signals for the deleted timer is
unspecified."
In both cases it is reasonable to expect that pending signals are
discarded. Especially in the reprogramming case it does not make sense to
account for previous overruns or to deliver a signal for a timer which
has been disarmed.
Add tests to validate that no unexpected signals are delivered. They fail
for now until the signal and posix timer code is updated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Add a test case to validate correct behaviour vs. SIG_IGN.
The posix specification states:
"Setting a signal action to SIG_IGN for a signal that is pending shall
cause the pending signal to be discarded, whether or not it is blocked."
The kernel implements this in the signal handling code, but due to the way
how posix timers are handling SIG_IGN for periodic timers, the behaviour
after installing a real handler again is inconsistent and suprising.
The following sequence is expected to deliver a signal:
install_handler(SIG);
block_signal(SIG);
timer_create(...); <- Should send SIG
timer_settime(value=100ms, interval=100ms);
sleep(1); <- Timer expires and queues signal, timer is not rearmed
as that should happen in the signal delivery path
ignore_signal(SIG); <- Discards queued signal
install_handler(SIG); <- Restore handler, should rearm but does not
sleep(1);
unblock_signal(SIG); <- Should deliver one signal with overrun count
set in siginfo
This fails because nothing rearms the timer when the signal handler is
restored. Add a test for this case which fails until the signal and posix
timer code is fixed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
No point in returning to main() on fatal errors. Just exit right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
|
|
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
|
|
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
