| Age | Commit message (Collapse) | Author |
|---|
|
Simon has been diligently and consistently reviewing networking
changes for at least as long as our development statistics
go back. Often if not usually topping the list of reviewers.
Make his role official.
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015153005.2854018-1-kuba@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Since commit
71ae2cb30531 ("net: plip: Fix fall-through warnings for Clang")
plip was not able to send any packets, this patch replaces one
unintended break; with fallthrough; which was originally missed by
commit 9525d69a3667 ("net: plip: mark expected switch fall-throughs").
I have verified with a real hardware PLIP connection that everything
works once again after applying this patch.
Fixes: 71ae2cb30531 ("net: plip: Fix fall-through warnings for Clang")
Signed-off-by: Jakub Boehm <boehm.jakub@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015-net-plip-tx-fix-v1-1-32d8be1c7e0b@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
The be_xmit() returns NETDEV_TX_OK without freeing skb
in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it.
Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Message-ID: <20241015144802.12150-1-wanghai38@huawei.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb
in case of skb->len being too long, add dev_kfree_skb() to fix it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015144148.7918-1-wanghai38@huawei.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Adjust the loop limit to prevent out-of-bounds access when iterating over
PI structures. The loop should not reach the index pcdev->nr_lines since
we allocate exactly pcdev->nr_lines number of PI structures. This fix
ensures proper bounds are maintained during iterations.
Fixes: 9be9567a7c59 ("net: pse-pd: Add support for PSE PIs")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Message-ID: <20241015130255.125508-1-kory.maincent@bootlin.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
"A couple of fixes to function graph infrastructure:
- Fix allocation of idle shadow stack allocation during hotplug
If function graph tracing is started when a CPU is offline, if it
were come online during the trace then the idle task that
represents the CPU will not get a shadow stack allocated for it.
This means all function graph hooks that happen while that idle
task is running (including in interrupt mode) will have all its
events dropped.
Switch over to the CPU hotplug mechanism that will have any newly
brought on line CPU get a callback that can allocate the shadow
stack for its idle task.
- Fix allocation size of the ret_stack_list array
When function graph tracing converted over to allowing more than
one user at a time, it had to convert its shadow stack from an
array of ret_stack structures to an array of unsigned longs. The
shadow stacks are allocated in batches of 32 at a time and assigned
to every running task. The batch is held by the ret_stack_list
array.
But when the conversion happened, instead of allocating an array of
32 pointers, it was allocated as a ret_stack itself (PAGE_SIZE).
This ret_stack_list gets passed to a function that iterates over
what it believes is its size defined by the
FTRACE_RETSTACK_ALLOC_SIZE macro (which is 32).
Luckily (PAGE_SIZE) is greater than 32 * sizeof(long), otherwise
this would have been an array overflow. This still should be fixed
and the ret_stack_list should be allocated to the size it is
expected to be as someday it may end up being bigger than
SHADOW_STACK_SIZE"
* tag 'ftrace-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Allocate ret_stack_list with proper size
fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull ipe fixes from Fan Wu:
"This addresses several issues identified by Luca when attempting to
enable IPE on Debian and systemd:
- address issues with IPE policy update errors and policy update
version check, improving the clarity of error messages for better
understanding by userspace programs.
- enable IPE policies to be signed by secondary and platform
keyrings, facilitating broader use across general Linux
distributions like Debian.
- updates the IPE entry in the MAINTAINERS file to reflect the new
tree URL and my updated email from kernel.org"
* tag 'ipe-pr-20241018' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
MAINTAINERS: update IPE tree url and Fan Wu's email
ipe: fallback to platform keyring also if key in trusted keyring is rejected
ipe: allow secondary and platform keyrings to install/update policies
ipe: also reject policy updates with the same version
ipe: return -ESTALE instead of -EINVAL on update when new policy has a lower version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
|
|
Pull 9p fixes from Dominique Martinet:
"Mashed-up update that I sat on too long:
- fix for multiple slabs created with the same name
- enable multipage folios
- theorical fix to also look for opened fids by inode if none was
found by dentry"
[ Enabling multi-page folios should have been done during the merge
window, but it's a one-liner, and the actual meat of the enablement
is in netfs and already in use for other filesystems... - Linus ]
* tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux:
9p: Avoid creating multiple slab caches with the same name
9p: Enable multipage folios
9p: v9fs_fid_find: also lookup by inode if not found dentry
|
|
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix several issues with the 'rustc-option' macro. It includes a
refactor from Masahiro of three '{cc,rust}-*' macros, which is not
a fix but avoids repeating the same commands (which would be
several lines in the case of 'rustc-option').
- Fix conditions for 'CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS'. It
includes the addition of 'CONFIG_RUSTC_LLVM_VERSION', which is not
a fix but is needed for the actual fix.
And a trivial grammar fix"
* tag 'rust-fixes-6.12-2' of https://github.com/Rust-for-Linux/linux:
cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
kbuild: rust: add `CONFIG_RUSTC_LLVM_VERSION`
kbuild: fix issues with rustc-option
kbuild: refactor cc-option-yn, cc-disable-warning, rust-option-yn macros
lib/Kconfig.debug: fix grammar in RUST_BUILD_ASSERT_ALLOW
|
|
A previous commit improved how !FMODE_NOWAIT is dealt with, but
inadvertently negated a check whilst doing so. This caused -EAGAIN to be
returned from reading files with O_NONBLOCK set. Fix up the check for
REQ_F_SUPPORT_NOWAIT.
Reported-by: Julian Orth <ju.orth@gmail.com>
Link: https://github.com/axboe/liburing/issues/1270
Fixes: f7c913438533 ("io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ret_stack_list is an array of ret_stack shadow stacks for the function
graph usage. When the first function graph is enabled, all tasks in the
system get a shadow stack. The ret_stack_list is a 32 element array of
pointers to these shadow stacks. It allocates the shadow stack in batches
(32 stacks at a time), assigns them to running tasks, and continues until
all tasks are covered.
When the function graph shadow stack changed from an array of
ftrace_ret_stack structures to an array of longs, the allocation of
ret_stack_list went from allocating an array of 32 elements to just a
block defined by SHADOW_STACK_SIZE. Luckily, that's defined as PAGE_SIZE
and is much more than enough to hold 32 pointers. But it is way overkill
for the amount needed to allocate.
Change the allocation of ret_stack_list back to a kcalloc() of
FTRACE_RETSTACK_ALLOC_SIZE pointers.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241018215212.23f13f40@rorschach
Fixes: 42675b723b484 ("function_graph: Convert ret_stack to a series of longs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph infrastructure allocates a shadow stack for every task
when enabled. This includes the idle tasks. The first time the function
graph is invoked, the shadow stacks are created and never freed until the
task exits. This includes the idle tasks.
Only the idle tasks that were for online CPUs had their shadow stacks
created when function graph tracing started. If function graph tracing is
enabled and a CPU comes online, the idle task representing that CPU will
not have its shadow stack created, and all function graph tracing for that
idle task will be silently dropped.
Instead, use the CPU hotplug mechanism to allocate the idle shadow stacks.
This will include idle tasks for CPUs that come online during tracing.
This issue can be reproduced by:
# cd /sys/kernel/tracing
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 0 > set_ftrace_pid
# echo function_graph > current_tracer
# echo 1 > options/funcgraph-proc
# echo 1 > /sys/devices/system/cpu/cpu1
# grep '<idle>' per_cpu/cpu1/trace | head
Before, nothing would show up.
After:
1) <idle>-0 | 0.811 us | __enqueue_entity();
1) <idle>-0 | 5.626 us | } /* enqueue_entity */
1) <idle>-0 | | dl_server_update_idle_time() {
1) <idle>-0 | | dl_scaled_delta_exec() {
1) <idle>-0 | 0.450 us | arch_scale_cpu_capacity();
1) <idle>-0 | 1.242 us | }
1) <idle>-0 | 1.908 us | }
1) <idle>-0 | | dl_server_start() {
1) <idle>-0 | | enqueue_dl_entity() {
1) <idle>-0 | | task_contending() {
Note, if tracing stops and restarts, the old way would then initialize
the onlined CPUs.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20241018214300.6df82178@rorschach
Fixes: 868baf07b1a25 ("ftrace: Fix memory leak with function graph and cpu hotplug")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to not affect subreg_def marks in its range
propagation (Eduard Zingerman)
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx (Dimitar Kanaliev)
- Fix the BPF verifier's delta propagation between linked registers
under 32-bit addition (Daniel Borkmann)
- Fix a NULL pointer dereference in BPF devmap due to missing rxq
information (Florian Kauer)
- Fix a memory leak in bpf_core_apply (Jiri Olsa)
- Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for
arrays of nested structs (Hou Tao)
- Fix build ID fetching where memory areas backing the file were
created with memfd_secret (Andrii Nakryiko)
- Fix BPF task iterator tid filtering which was incorrectly using pid
instead of tid (Jordan Rome)
- Several fixes for BPF sockmap and BPF sockhash redirection in
combination with vsocks (Michal Luczaj)
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered (Andrea Parri)
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility
of an infinite BPF tailcall (Pu Lehui)
- Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot
be resolved (Thomas Weißschuh)
- Fix a bug in kfunc BTF caching for modules where the wrong BTF object
was returned (Toke Høiland-Jørgensen)
- Fix a BPF selftest compilation error in cgroup-related tests with
musl libc (Tony Ambardar)
- Several fixes to BPF link info dumps to fill missing fields (Tyrone
Wu)
- Add BPF selftests for kfuncs from multiple modules, checking that the
correct kfuncs are called (Simon Sundberg)
- Ensure that internal and user-facing bpf_redirect flags don't overlap
(Toke Høiland-Jørgensen)
- Switch to use kvzmalloc to allocate BPF verifier environment (Rik van
Riel)
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat
under RT (Wander Lairson Costa)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (38 commits)
lib/buildid: Handle memfd_secret() files in build_id_parse()
selftests/bpf: Add test case for delta propagation
bpf: Fix print_reg_state's constant scalar dump
bpf: Fix incorrect delta propagation between linked registers
bpf: Properly test iter/task tid filtering
bpf: Fix iter/task tid filtering
riscv, bpf: Make BPF_CMPXCHG fully ordered
bpf, vsock: Drop static vsock_bpf_prot initialization
vsock: Update msg_count on read_skb()
vsock: Update rx_bytes on read_skb()
bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock
selftests/bpf: Add asserts for netfilter link info
bpf: Fix link info netfilter flags to populate defrag flag
selftests/bpf: Add test for sign extension in coerce_subreg_to_size_sx()
selftests/bpf: Add test for truncation after sign extension in coerce_reg_to_size_sx()
bpf: Fix truncation bug in coerce_reg_to_size_sx()
selftests/bpf: Assert link info uprobe_multi count & path_size if unset
bpf: Fix unpopulated path_size when uprobe_multi fields unset
selftests/bpf: Fix cross-compiling urandom_read
selftests/bpf: Add test for kfunc module order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
- fix test makefile to install tests directory without which the test
fails with errors
* tag 'linux_kselftest-fixes-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest: hid: add the missing tests directory
|
|
When initially adding the touchkey support, a mistake was made in the
property parsing code. The possible negative errno from
device_property_count_u32() was never checked, which was an oversight
left from converting to it from the of_property as part of the review
fixes.
Re-add the correct handling of the absent property, in which case zero
touchkeys should be assumed, which would disable the feature.
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Tested-by: Jakob Hauser <jahau@rocketmail.com>
Fixes: 075d9b22c8fe ("Input: zinitix - add touchkey support")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20241004-zinitix-no-keycodes-v2-1-876dc9fea4b6@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a regression this merge window where cloning of registered
buffers didn't take into account the dummy_ubuf
- Fix a race with reading how many SQRING entries are available,
causing userspace to need to loop around io_uring_sqring_wait()
rather than being able to rely on SQEs being available when it
returned
- Ensure that the SQPOLL thread is TASK_RUNNING before running
task_work off the cancelation exit path
* tag 'io_uring-6.12-20241018' of git://git.kernel.dk/linux:
io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work
io_uring/rsrc: ignore dummy_ubuf for buffer cloning
io_uring/sqpoll: close race on waiting for sqring entries
|
|
Add MSI Claw A1M controller to xpad_device match table when in xinput mode.
Add MSI VID as XPAD_XBOX360_VENDOR.
Signed-off-by: John Edwards <uejji@uejji.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Christopher Snowhill <kode54@gmail.com>
Link: https://lore.kernel.org/r/20241010232020.3292284-4-uejji@uejji.net
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Update Integrity Policy Enforcement (IPE) LSM tree url and
maintainer's email to the newly issued kernel.org tree/email.
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
If enabled, we fallback to the platform keyring if the trusted keyring
doesn't have the key used to sign the ipe policy. But if pkcs7_verify()
rejects the key for other reasons, such as usage restrictions, we do not
fallback. Do so, following the same change in dm-verity.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Suggested-by: Serge Hallyn <serge@hallyn.com>
[FW: fixed some line length issues and a typo in the commit message]
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
Pull smb client fixes from Steve French:
- Fix possible double free setting xattrs
- Fix slab out of bounds with large ioctl payload
- Remove three unused functions, and an unused variable that could be
confusing
* tag 'v6.12-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Remove unused functions
smb/client: Fix logically dead code
smb: client: fix OOBs when building SMB2_IOCTL request
smb: client: fix possible double free in smb2_set_ea()
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix integer overflow in xrep_bmap
- Fix stale dealloc punching for COW IO
* tag 'xfs-6.12-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: punch delalloc extents from the COW fork for COW writes
xfs: set IOMAP_F_SHARED for all COW fork allocations
xfs: share more code in xfs_buffered_write_iomap_begin
xfs: support the COW fork in xfs_bmap_punch_delalloc_range
xfs: IOMAP_ZERO and IOMAP_UNSHARE already hold invalidate_lock
xfs: take XFS_MMAPLOCK_EXCL xfs_file_write_zero_eof
xfs: factor out a xfs_file_write_zero_eof helper
iomap: move locking out of iomap_write_delalloc_release
iomap: remove iomap_file_buffered_write_punch_delalloc
iomap: factor out a iomap_last_written_block helper
xfs: fix integer overflow in xrep_bmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the amd-pstate cpufreq driver and update the
intel_rapl power capping driver with a new processor ID.
Specifics:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling it
in amd_pstate_unregister_driver() when switching driver operation
modes (Dhananjay Ugwekar)
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello)
- Add ArrowLake-H to the list of processors where PL4 is supported in
the MSR part of the intel_rapl power capping driver (Srinivas
Pandruvada)"
* tag 'pm-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl_msr: Add PL4 support for ArrowLake-H
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix auto-detect regression in jc42 driver"
* tag 'hwmon-for-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
[PATCH} hwmon: (jc42) Properly detect TSE2004-compliant devices again
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
scattered fixes including a largish revert in mgag200, then amdgpu,
vmwgfx and scattering of other minor ones.
All seems pretty regular.
msm:
- Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
- GPU:
- a7xx: add a fence wait before SMMU table update
xe:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew
Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes
amdkfd:
- VRAM usage reporting fix
radeon:
- Fix possible_clones handling
i915:
- Two DP bandwidth related MST fixes
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()"
* tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits)
drm/ast: vga: Clear EDID if no display is connected
drm/ast: sil164: Clear EDID if no display is connected
Revert "drm/mgag200: Add vblank support"
drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs
drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
drm/xe/bmg: improve cache flushing behaviour
drm/xe/xe_sync: initialise ufence.signalled
drm/xe/ufence: ufence can be signaled right after wait_woken
drm/xe: Use bookkeep slots for external BO's in exec IOCTL
drm/xe/query: Increase timestamp width
drm/xe: Don't free job in TDR
drm/xe: Take job list lock in xe_sched_add_pending_job
drm/xe: fix unbalanced rpm put() with declare_wedged()
drm/xe: fix unbalanced rpm put() with fence_fini()
drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg
drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
drm/msm/a6xx+: Insert a fence wait before SMMU table update
drm/msm/dpu: don't always program merge_3d block
drm/msm/dpu: Don't always set merge_3d pending flush
...
|
|
The lockdep asserts for the new follow_pfnmap() API "knows" that a
pfnmap always has a vma->vm_file, since that's the only way to create
such a mapping.
And that's actually true for all the normal cases. But not for the mmap
failure case, where the incomplete mapping is torn down and we have
cleared vma->vm_file because the failure occured before the file was
linked to the vma.
So this codepath does actually need to check for vm_file being NULL.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 6da8e9634bb7 ("mm: new follow_pfnmap API")
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge amd-pstate driver fixes for 6.12-rc4:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling
it in amd_pstate_unregister_driver() during driver operation mode
switch (Dhananjay Ugwekar).
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello).
* pm-cpufreq:
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes from Will Deacon:
- Clarify warning message when failing to disable the MMU-500
prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index
when 32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
Intel VT-d fix from Lu Baolu:
- Fix incorrect pci_for_each_dma_alias() for non-PCI devices"
* tag 'iommu-fixes-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
iommu/arm-smmu-v3: Convert comma to semicolon
iommu/arm-smmu-v3: Fix last_sid_idx calculation for sid_bits==32
iommu/arm-smmu: Clarify MMU-500 CPRE workaround
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- To prevent possible memory leak, free "name" on error in
opal_event_init()
Thanks to Michael Ellerman and 2639161967.
* tag 'powerpc-6.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Free name on error in opal_event_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix PCI error recovery by handling error events correctly
- Fix CCA crypto card behavior within protected execution environment
- Two KVM commits which fix virtual vs physical address handling bugs
in KVM pfault handling
- Fix return code handling in pckmo_key2protkey()
- Deactivate sclp console as late as possible so that outstanding
messages appear on the console instead of being dropped on reboot
- Convert newlines to CRLF instead of LFCR for the sclp vt220 driver,
as required by the vt220 specification
- Initialize also psw mask in perf_arch_fetch_caller_regs() to make
sure that user_mode(regs) will return false
- Update defconfigs
* tag 's390-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Update defconfigs
s390: Initialize psw mask in perf_arch_fetch_caller_regs()
s390/sclp_vt220: Convert newlines to CRLF instead of LFCR
s390/sclp: Deactivate sclp after all its users
s390/pkey_pckmo: Return with success for valid protected key types
KVM: s390: Change virtual to physical address access in diag 0x258 handler
KVM: s390: gaccess: Check if guest address is in memslot
s390/ap: Fix CCA crypto card behavior within protected execution environment
s390/pci: Handle PCI error codes other than 0x3a
|
|
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but
they are not mentioned in the Kconfig help when the code was added.
List those models in the Kconfig help accordingly.
Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com>
Link: https://lore.kernel.org/r/20241017144747.15966-1-0xff07@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove some entries due to various compliance requirements. They can come
back in the future if sufficient documentation is provided.
Link: https://lore.kernel.org/r/2024101835-tiptop-blip-09ed@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building the kernel with W=1 generates the following warning:
fs/proc/fd.c:81: warning: This comment starts with '/**',
but isn't a kernel-doc comment.
Use a normal comment for the helper function proc_fdinfo_permission().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20241018102705.92237-2-thorsten.blum@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The Thinkpad X1 Tablet Gen 3 keyboard has the same Lenovo specific quirks
as the original Thinkpad X1 Tablet keyboard.
Add the PID for the "Thinkpad X1 Tablet Gen 3 keyboard" to the hid-lenovo
driver to fix the FnLock, Mute and media buttons not working.
Suggested-by: Izhar Firdaus <izhar@fedoraproject.org>
Closes https://bugzilla.redhat.com/show_bug.cgi?id=2315395
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.
After resume from suspend, one can communicate with this device just fine.
We can read data from it or request a reset,
but for some reason the interrupt line will not go up
when new events are available.
(it can correctly respond to a reset with an interrupt tho)
The only way I found to wake this device up
is to send anything to it after ~1.5s mark,
for example a simple read request, or power mode change.
In this patch, I simply delay the resume steps with msleep,
this will cause the set_power request to happen after
the ~1.5s barrier causing the device to resume its event interrupts.
Sleep was used rather than delayed_work
to make this workaround as non-invasive as possible.
[jkosina@suse.com: shortlog update]
Signed-off-by: Bartłomiej Maryńczak <marynczakbartlomiej@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.12-rc4
Here are some new modem device ids.
Everything has been in linux-next over night with no reported issues.
* tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
|
|
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition, that
dependency causes xen-privcmd can't be loaded on domU, because dependent
xen-pciback isn't always be loaded successfully on domU.
To solve above problem, remove that dependency, and do not call
pcistub_get_gsi_from_sbdf() directly, instead add a hook in
drivers/xen/apci.c, xen-pciback register the real call function, then in
privcmd_ioctl_pcidev_get_gsi call that hook.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241012084537.1543059-1-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
hash_check_key() checks and repairs the hash table btrees: dirents and
xattrs are open addressing hash tables.
We recently had a corruption reported where the hash type on an inode
somehow got flipped, which made the existing dirents invisible and
allowed new ones to be created with the same name.
Now, hash_check_key() can repair duplicates: it will delete one of them,
if it has an xattr or dangling dirent, but if it has two valid dirents
one of them gets renamed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a variant of bch2_hash_set_in_snapshot() that returns the existing
key on -EEXIST.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Different versions of the same inode (same inode number, different
snapshot ID) must have the same hash seed and type - lookups require
this, since they see keys from different snapshots simultaneously.
To repair we only need to make the inodes consistent, hash_check_key()
will do the rest.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This helped with discovering some filesystem corruption fsck has having
trouble with: the str_hash type had gotten flipped on one snapshot's
version of an inode.
All versions of a given inode number have the same hash seed and hash
type, since lookups will be done with a single hash/seed and type and
see dirents/xattrs from multiple snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Trivial cleanup - add a normal BITMASK() helper for bch_inode_unpacked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The options parse in get_tree will split the options buffer, it will
get the empty string for last one by strsep(). After commit
ea0eeb89b1d5 ("bcachefs: reject unknown mount options") is merged,
unknown mount options is not allowed (here is empty string), and this
causes this errors. This can be reproduced just by the following steps:
bcachefs format /dev/loop
mount -t bcachefs -o metadata_target=loop1 /dev/loop1 /mnt/bcachefs/
Fixes: ea0eeb89b1d5 ("bcachefs: reject unknown mount options")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When call show_options in bcachefs, the options buffer is appeneded
to the seq variable. In fact, it requires an additional comma to be
appended first. This will affect the remount process when reading
existing mount options.
Fixes: 9305cf91d05e ("bcachefs: bch2_opts_to_text()")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Found by generic/299: When we have to truncate a write due to -ENOSPC,
we may have to read in the folio we're writing to if we're now no longer
doing a complete write to a !uptodate folio.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_folio_reservation_get_partial(), on partial success, will now
return a reservation that's aligned to the filesystem blocksize.
This is a partial fix for fstests generic/299 - fio verify is badly
behaved in the presence of short writes that aren't aligned to its
blocksize.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
