| Age | Commit message (Collapse) | Author |
|---|
|
sctp_transport_pl_hlen() is called to calculate the outer header length
for PL. However, as the Figure in rfc8899#section-4.4:
Any additional
headers .--- MPS -----.
| | |
v v v
+------------------------------+
| IP | ** | PL | protocol data |
+------------------------------+
<----- PLPMTU ----->
<---------- PMTU -------------->
Outer header are IP + Any additional headers, which doesn't include
Packetization Layer itself header, namely sctphdr, whereas sctphdr
is counted by __sctp_mtu_payload().
The incorrect calculation caused the link pathmtu to be set larger
than expected by t->pl.pmtu + sctp_transport_pl_hlen(). This patch
is to fix it by subtracting sctphdr len in sctp_transport_pl_hlen().
Fixes: d9e2e410ae30 ("sctp: add the constants/variables and states and some APIs for transport")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_transport_pl_update() is called when transport update its dst and
pathmtu, instead of stopping the PLPMTUD probe timer, PLPMTUD should
start over and reset the probe timer. Otherwise, the PLPMTUD service
would stop.
Fixes: 92548ec2f1f9 ("sctp: add the probe timer in transport for PLPMTUD")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently when PLPMTUD enters Error state, transport pathmtu will be set
to MIN_PLPMTU(512) while probe is continuing with BASE_PLPMTU(1200). It
will cause pathmtu to stay in a very small value, even if the real pmtu
is some value like 1000.
RFC8899 doesn't clearly say how to set the value in Error state. But one
possibility could be keep using BASE_PLPMTU for the real pmtu, but allow
to do IP fragmentation when it's in Error state.
As it says in rfc8899#section-5.4:
Some paths could be unable to sustain packets of the BASE_PLPMTU
size. The Error State could be implemented to provide robustness to
such paths. This allows fallback to a smaller than desired PLPMTU
rather than suffer connectivity failure. This could utilize methods
such as endpoint IP fragmentation to enable the PL sender to
communicate using packets smaller than the BASE_PLPMTU.
This patch is to set pmtu to BASE_PLPMTU instead of MIN_PLPMTU for Error
state in sctp_transport_pl_send/toobig(), and set packet ipfragok for
non-probe packets when it's in Error state.
Fixes: 1dc68c194571 ("sctp: do state transition when PROBE_COUNT == MAX_PROBES on HB send path")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from WiFi (mac80211), and BPF.
Current release - regressions:
- skb_expand_head: adjust skb->truesize to fix socket memory
accounting
- mptcp: fix corrupt receiver key in MPC + data + checksum
Previous releases - regressions:
- multicast: calculate csum of looped-back and forwarded packets
- cgroup: fix memory leak caused by missing cgroup_bpf_offline
- cfg80211: fix management registrations locking, prevent list
corruption
- cfg80211: correct false positive in bridge/4addr mode check
- tcp_bpf: fix race in the tcp_bpf_send_verdict resulting in reusing
previous verdict
Previous releases - always broken:
- sctp: enhancements for the verification tag, prevent attackers from
killing SCTP sessions
- tipc: fix size validations for the MSG_CRYPTO type
- mac80211: mesh: fix HE operation element length check, prevent out
of bound access
- tls: fix sign of socket errors, prevent positive error codes being
reported from read()/write()
- cfg80211: scan: extend RCU protection in
cfg80211_add_nontrans_list()
- implement ->sock_is_readable() for UDP and AF_UNIX, fix poll() for
sockets in a BPF sockmap
- bpf: fix potential race in tail call compatibility check resulting
in two operations which would make the map incompatible succeeding
- bpf: prevent increasing bpf_jit_limit above max
- bpf: fix error usage of map_fd and fdget() in generic batch update
- phy: ethtool: lock the phy for consistency of results
- prevent infinite while loop in skb_tx_hash() when Tx races with
driver reconfiguring the queue <> traffic class mapping
- usbnet: fixes for bad HW conjured by syzbot
- xen: stop tx queues during live migration, prevent UAF
- net-sysfs: initialize uid and gid before calling
net_ns_get_ownership
- mlxsw: prevent Rx stalls under memory pressure"
* tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
Revert "net: hns3: fix pause config problem after autoneg disabled"
mptcp: fix corrupt receiver key in MPC + data + checksum
riscv, bpf: Fix potential NULL dereference
octeontx2-af: Fix possible null pointer dereference.
octeontx2-af: Display all enabled PF VF rsrc_alloc entries.
octeontx2-af: Check whether ipolicers exists
net: ethernet: microchip: lan743x: Fix skb allocation failure
net/tls: Fix flipped sign in async_wait.err assignment
net/tls: Fix flipped sign in tls_err_abort() calls
net/smc: Correct spelling mistake to TCPF_SYN_RECV
net/smc: Fix smc_link->llc_testlink_time overflow
nfp: bpf: relax prog rejection for mtu check through max_pkt_offset
vmxnet3: do not stop tx queues after netif_device_detach()
r8169: Add device 10ec:8162 to driver r8169
ptp: Document the PTP_CLK_MAGIC ioctl number
usbnet: fix error return code in usbnet_probe()
net: hns3: adjust string spaces of some parameters of tx bd info in debugfs
net: hns3: expand buffer len for some debugfs command
net: hns3: add more string spaces for dumping packets number of queue info in debugfs
net: hns3: fix data endian problem of some functions of debugfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of final driver specific fixes for v5.15, one fixing
potential ID collisions between two instances of the Altera driver and
one making Microwire full duplex mode actually work on pl022"
* tag 'spi-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spl022: fix Microwire full duplex mode
spi: altera: Change to dynamic allocation of spi id
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"This fixes a potential double free when handling an out of memory
error inserting a node into an rbtree regcache"
* tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix possible double-free in regcache_rbtree_exit()
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
"I overlooked Guenters request to sent this upstream earlier, so it's a
bit late in the release cycle.
This contains:
- Revert "watchdog: iTCO_wdt: Account for rebooting on second
timeout"
- sbsa: only use 32-bit accessors
- sbsa: drop unneeded MODULE_ALIAS
- ixp4xx_wdt: Fix address space warning
- Fix OMAP watchdog early handling"
* tag 'linux-watchdog-5.15-rc7' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Fix OMAP watchdog early handling
watchdog: ixp4xx_wdt: Fix address space warning
watchdog: sbsa: drop unneeded MODULE_ALIAS
watchdog: sbsa: only use 32-bit accessors
Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Do not WARN when attaching event probe to non-existent event
If the user tries to attach an event probe (eprobe) to an event that
does not exist, it will trigger a warning. There's an error check that
only expects memory issues otherwise it is considered a bug. But
changes in the code to move around the locking made it that it can
error out if the user attempts to attach to an event that does not
exist, returning an -ENODEV. As this path can be caused by user space
putting in a bad value, do not trigger a WARN"
* tag 'trace-v5.15-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not warn when connecting eprobe to non existing event
|
|
This reverts commit 3bda2e5df476417b6d08967e2d84234a59d57b1c.
According to discussion with Andrew as follow:
https://lore.kernel.org/netdev/09eda9fe-196b-006b-6f01-f54e75715961@huawei.com/
HNS3 driver needs to separate pause autoneg from general autoneg, so revert
this incorrect patch.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/20211028140624.53149-1-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
using packetdrill it's possible to observe that the receiver key contains
random values when clients transmit MP_CAPABLE with data and checksum (as
specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid
using the skb extension copy when writing the MP_CAPABLE sub-option.
Fixes: d7b269083786 ("mptcp: shrink mptcp_out_options struct")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233
Reported-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bpf_jit_binary_free() function requires a non-NULL argument. When
the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps,
jit_data->header will be NULL, which triggers a NULL
dereference. Avoid this by checking the argument, prior calling the
function.
Fixes: ca6cb5447cec ("riscv, bpf: Factor common RISC-V JIT code")
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20211028125115.514587-1-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rakesh Babu Saladi says:
====================
RVU Debugfs fix updates.
The following patch series consists of the patch fixes done over
rvu_debugfs.c and rvu_nix.c files.
Patch 1: Check and return if ipolicers do not exists.
Patch 2: Fix rsrc_alloc to print all enabled PF/VF entries with list of LFs
allocated for each functional block.
Patch 3: Fix possible null pointer dereference.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes possible null pointer dereference in files
"rvu_debugfs.c" and "rvu_nix.c"
Fixes: 8756828a8148 ("octeontx2-af: Add NPA aura and pool contexts to debugfs")
Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries")
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we are using a fixed buffer size of length 2048 to display
rsrc_alloc output. As a result a maximum of 2048 characters of
rsrc_alloc output is displayed, which may lead sometimes to display only
partial output. This patch fixes this dependency on max limit of buffer
size and displays all PF VF entries.
Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12
characters to print the list of LFs of each block for a PF/VF. If the
length of list of LFs of a block exceeds this fixed width then the list
gets truncated and displays only a part of the list. This patch fixes
this by using the maximum possible length of list of LFs among all
blocks of all PFs and VFs entries as the width size.
Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.")
Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status")
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While displaying ingress policers information in
debugfs check whether ingress policers exist in
the hardware or not because some platforms(CN9XXX)
do not have this feature.
Fixes: e7d8971763f3 ("octeontx2-af: cn10k: Debugfs support for bandwidth")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances.
GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context.
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk->sk_err contains a positive number, yet async_wait.err wants the
opposite. Fix the missed sign flip, which Jakub caught by inspection.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk->sk_err appears to expect a positive value, a convention that ktls
doesn't always follow and that leads to memory corruption in other code.
For instance,
[kworker]
tls_encrypt_done(..., err=<negative error from crypto request>)
tls_err_abort(.., err)
sk->sk_err = err;
[task]
splice_from_pipe_feed
...
tls_sw_do_sendpage
if (sk->sk_err) {
ret = -sk->sk_err; // ret is positive
splice_from_pipe_feed (continued)
ret = actor(...) // ret is still positive and interpreted as bytes
// written, resulting in underflow of buf->len and
// sd->len, leading to huge buf->offset and bogus
// addresses computed in later calls to actor()
Fix all tls_err_abort() callers to pass a negative error code
consistently and centralize the error-prone sign flip there, throwing in
a warning to catch future misuse and uninlining the function so it
really does only warn once.
Cc: stable@vger.kernel.org
Fixes: c46234ebb4d1e ("tls: RX path for ktls")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tony Lu says:
====================
Fixes for SMC
There are some fixes for SMC.
v1->v2:
- fix wrong email address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There should use TCPF_SYN_RECV instead of TCP_SYN_RECV.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The value of llc_testlink_time is set to the value stored in
net->ipv4.sysctl_tcp_keepalive_time when linkgroup init. The value of
sysctl_tcp_keepalive_time is already jiffies, so we don't need to
multiply by HZ, which would cause smc_link->llc_testlink_time overflow,
and test_link send flood.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MTU change is refused whenever the value of new MTU is bigger than
the max packet bytes that fits in NFP Cluster Target Memory (CTM).
However, an eBPF program doesn't always need to access the whole
packet data.
The maximum direct packet access (DPA) offset has always been
caculated by verifier and stored in the max_pkt_offset field of prog
aux data.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The netif_device_detach() conditionally stops all tx queues if the queues
are running. There is no need to call netif_tx_stop_all_queues() again.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the syscall trace points are not configured in, the kselftests for
ftrace will try to attach an event probe (eprobe) to one of the system
call trace points. This triggered a WARNING, because the failure only
expects to see memory issues. But this is not the only failure. The user
may attempt to attach to a non existent event, and the kernel must not
warn about it.
Link: https://lkml.kernel.org/r/20211027120854.0680aa0f@gandalf.local.home
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This patch makes the driver r8169 pick up device Realtek Semiconductor Co.
, Ltd. Device [10ec:8162].
Signed-off-by: Janghyub Seo <jhyub06@gmail.com>
Suggested-by: Rushab Shah <rushabshah32@gmail.com>
Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PTP_CLK_MAGIC to the userspace-api/ioctl/ioctl-number.rst
documentation file.
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20211024163831.10200-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"A couple of fixes that seem important enough to pick at the last
moment"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-ring: fix DMA metadata flags
vduse: Fix race condition between resetting and irq injecting
vduse: Disallow injecting interrupt before DRIVER_OK is set
|
|
The flags are currently overwritten, leading to the wrong direction
being passed to the DMA unmap functions.
Fixes: 72b5e8958738aaa4 ("virtio-ring: store DMA metadata in desc_extra for split virtqueue")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20211026133100.17541-1-vincent.whitchurch@axis.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Return error code if usb_maxpacket() returns 0 in usbnet_probe()
Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull nds32 tracing fix from Steven Rostedt:
"Fix nds32le build when DYNAMIC_FTRACE is disabled
A randconfig found that nds32le architecture fails to build due to a
prototype mismatch between a ftrace function pointer and the function
it was to be assigned to. That function pointer prototype missed being
updated when all the ftrace callbacks were updated"
* tag 'trace-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/nds32: Update the proto for ftrace_trace_function to match ftrace_stub
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull nios2 fix from Dinh Nguyen:
"Fix a build error for allmodconfig"
* tag 'nios2_fixes_for_v5.15_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST
|
|
Pull rdma fixes from Jason Gunthorpe:
"Nothing very exciting here, it has been a quiet cycle overall. Usual
collection of small bug fixes:
- irdma issues with CQ entries, VLAN completions and a mutex deadlock
- Incorrect DCT packets in mlx5
- Userspace triggered overflows in qib
- Locking error in hfi
- Typo in errno value in qib/hfi1
- Double free in qedr
- Leak of random kernel memory to userspace with a netlink callback"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/sa_query: Use strscpy_pad instead of memcpy to copy a string
RDMA/irdma: Do not hold qos mutex twice on QP resume
RDMA/irdma: Set VLAN in UD work completion correctly
RDMA/mlx5: Initialize the ODP xarray when creating an ODP MR
rdma/qedr: Fix crash due to redundant release of device's qp memory
RDMA/rdmavt: Fix error code in rvt_create_qp()
IB/hfi1: Fix abba locking issue with sc_disable()
IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields
RDMA/mlx5: Set user priority for DCT
RDMA/irdma: Process extended CQ entries correctly
|
|
The ftrace callback prototype was changed to pass a special ftrace_regs
instead of pt_regs as the last parameter, but the static ftrace for nds32
missed updating ftrace_trace_function and this caused a warning when
compared to ftrace_stub:
../arch/nds32/kernel/ftrace.c: In function '_mcount':
../arch/nds32/kernel/ftrace.c:24:35: error: comparison of distinct pointer types lacks a cast [-Werror]
24 | if (ftrace_trace_function != ftrace_stub)
| ^~
Link: https://lore.kernel.org/all/20211027055554.19372-1-rdunlap@infradead.org/
Link: https://lkml.kernel.org/r/20211027125101.33449969@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: d19ad0775dcd6 ("ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two fixes:
* bridge vs. 4-addr mode check was wrong
* management frame registrations locking was
wrong, causing list corruption/crashes
====================
Link: https://lore.kernel.org/r/20211027143756.91711-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nios2:allmodconfig builds fail with
make[1]: *** No rule to make target 'arch/nios2/boot/dts/""',
needed by 'arch/nios2/boot/dts/built-in.a'. Stop.
make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored)
This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL,
which in turn enables NIOS2_DTB_SOURCE. This causes the build error
because the default value for NIOS2_DTB_SOURCE is an empty string.
Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error.
Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adjusts the string spaces of some parameters of tx bd info in
debugfs according to their maximum needs.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The specified buffer length for three debugfs files fd_tcam, uc and tqp
is not enough for their maximum needs, so this patch fixes them.
Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs")
Fixes: 1556ea9120ff ("net: hns3: refactor dump mac list of debugfs")
Fixes: d96b0e59468d ("net: hns3: refactor dump reg of debugfs")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in debugfs
As the width of packets number registers is 32 bits, they needs at most
10 characters for decimal data printing, but now the string spaces is not
enough, so this patch fixes it.
Fixes: e44c495d95e ("net: hns3: refactor queue info of debugfs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The member data in struct hclge_desc is type of __le32, it needs endian
conversion before using it, and some functions of debugfs didn't do that,
so this patch fixes it.
Fixes: c0ebebb9ccc1 ("net: hns3: Add "dcb register" status information query function")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if there is a reset event triggered by RAS during device in
initialization process, driver may run reset process concurrently with
initialization process. In this case, it may cause problem. For example,
the RSS indirection table may has not been alloc memory in initialization
process yet, but it is used in reset process, it will cause a call trace
like this:
[61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
[61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
[61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf]
[61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf]
[61228.937248] sp : ffff8000162ebb50
[61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080
[61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080
[61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040
[61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030
[61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8
[61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960
[61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530
[61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011
[61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049
[61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480
[61229.027002] Call trace:
[61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf]
[61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf]
[61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf]
[61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf]
[61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf]
[61229.068491] process_one_work+0x1dc/0x48c
[61229.074121] worker_thread+0x15c/0x464
[61229.078562] kthread+0x168/0x16c
[61229.082873] ret_from_fork+0x10/0x18
[61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43)
[61229.095357] ---[ end trace 153661a538f6768c ]---
To fix this problem, don't schedule reset task before initialization
process is done.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the workqueue of hclge/hclgevf is executed on
the CPU that initiates scheduling requests by default. In
stress scenarios, the CPU may be busy and workqueue scheduling
is completed after a long period of time. To avoid this
situation and implement proper scheduling, use the WQ_UNBOUND
mode instead. In this way, the workqueue can be performed on
a relatively idle CPU.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a TP port is configured by follow steps:
1.ethtool -s ethx autoneg off speed 100 duplex full
2.ethtool -A ethx rx on tx on
3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off)
4.ethtool -s ethx autoneg off speed 100 duplex full
In step 3, driver will set rx&tx pause parameters of hardware to off as
pause parameters negotiated with link partner are off.
After step 4, the "ethtool -a ethx" command shows both rx and tx pause
parameters are on. However, pause parameters of hardware are still off
and port has no flow control function actually.
To fix this problem, if autoneg is disabled, driver uses its saved
parameters to restore pause of hardware. If the speed is not changed in
this case, there is no link state changed for phy, it will cause the pause
parameter is not taken effect, so we need to force phy to go down and up.
Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of small fixes for the soc tree:
- Incorrect ethernet phy settings found on i.mx and allwinner
platforms
- a revert for a Qualcomm DT change that caused a boot regression
- four patches for incorrect settings in i.MX DT files
- new MAINTAINER file entries for dhcom boards
- a Kconfig fix for a reset driver that became unselectable
- three more code changes for bugs in reset drivers"
* tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1
Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct
reset: socfpga: add empty driver allowing consumers to probe
reset: tegra-bpmp: Handle errors in BPMP response
reset: pistachio: Re-enable driver selection
reset: brcmstb-rescal: fix incorrect polarity of status bit
ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-10-26
We've added 12 non-merge commits during the last 7 day(s) which contain
a total of 23 files changed, 118 insertions(+), 98 deletions(-).
The main changes are:
1) Fix potential race window in BPF tail call compatibility check, from Toke Høiland-Jørgensen.
2) Fix memory leak in cgroup fs due to missing cgroup_bpf_offline(), from Quanyang Wang.
3) Fix file descriptor reference counting in generic_map_update_batch(), from Xu Kuohai.
4) Fix bpf_jit_limit knob to the max supported limit by the arch's JIT, from Lorenz Bauer.
5) Fix BPF sockmap ->poll callbacks for UDP and AF_UNIX sockets, from Cong Wang and Yucong Sun.
6) Fix BPF sockmap concurrency issue in TCP on non-blocking sendmsg calls, from Liu Jian.
7) Fix build failure of INODE_STORAGE and TASK_STORAGE maps on !CONFIG_NET, from Tejun Heo.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix potential race in tail call compatibility check
bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NET
selftests/bpf: Use recv_timeout() instead of retries
net: Implement ->sock_is_readable() for UDP and AF_UNIX
skmsg: Extract and reuse sk_msg_is_readable()
net: Rename ->stream_memory_read to ->sock_is_readable
tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function
cgroup: Fix memory leak caused by missing cgroup_bpf_offline
bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()
bpf: Prevent increasing bpf_jit_limit above max
bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT
bpf: Define bpf_jit_alloc_exec_limit for riscv JIT
====================
Link: https://lore.kernel.org/r/20211026201920.11296-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lorenzo noticed that the code testing for program type compatibility of
tail call maps is potentially racy in that two threads could encounter a
map with an unset type simultaneously and both return true even though they
are inserting incompatible programs.
The race window is quite small, but artificially enlarging it by adding a
usleep_range() inside the check in bpf_prog_array_compatible() makes it
trivial to trigger from userspace with a program that does, essentially:
map_fd = bpf_create_map(BPF_MAP_TYPE_PROG_ARRAY, 4, 4, 2, 0);
pid = fork();
if (pid) {
key = 0;
value = xdp_fd;
} else {
key = 1;
value = tc_fd;
}
err = bpf_map_update_elem(map_fd, &key, &value, 0);
While the race window is small, it has potentially serious ramifications in
that triggering it would allow a BPF program to tail call to a program of a
different type. So let's get rid of it by protecting the update with a
spinlock. The commit in the Fixes tag is the last commit that touches the
code in question.
v2:
- Use a spinlock instead of an atomic variable and cmpxchg() (Alexei)
v3:
- Put lock and the members it protects into an embedded 'owner' struct (Daniel)
Fixes: 3324b584b6f6 ("ebpf: misc core cleanup")
Reported-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026110019.363464-1-toke@redhat.com
|
|
bpf_types.h has BPF_MAP_TYPE_INODE_STORAGE and BPF_MAP_TYPE_TASK_STORAGE
declared inside #ifdef CONFIG_NET although they are built regardless of
CONFIG_NET. So, when CONFIG_BPF_SYSCALL && !CONFIG_NET, they are built
without the declarations leading to spurious build failures and not
registered to bpf_map_types making them unavailable.
Fix it by moving the BPF_MAP_TYPE for the two map types outside of
CONFIG_NET.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a10787e6d58c ("bpf: Enable task local storage for tracing programs")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/YXG1cuuSJDqHQfRY@slm.duckdns.org
|
|
Cong Wang says:
====================
This patchset fixes ->poll() for sockets in sockmap and updates
selftests accordingly with select(). Please check each patch
for more details.
Fixes: c50524ec4e3a ("Merge branch 'sockmap: add sockmap support for unix datagram socket'")
Fixes: 89d69c5d0fbc ("Merge branch 'sockmap: introduce BPF_SK_SKB_VERDICT and support UDP'")
Acked-by: John Fastabend <john.fastabend@gmail.com>
---
v4: add a comment in udp_poll()
v3: drop sk_psock_get_checked()
reuse tcp_bpf_sock_is_readable()
v2: rename and reuse ->stream_memory_read()
fix a compile error in sk_psock_get_checked()
Cong Wang (3):
net: rename ->stream_memory_read to ->sock_is_readable
skmsg: extract and reuse sk_msg_is_readable()
net: implement ->sock_is_readable() for UDP and AF_UNIX
====================
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We use non-blocking sockets in those tests, retrying for
EAGAIN is ugly because there is no upper bound for the packet
arrival time, at least in theory. After we fix poll() on
sockmap sockets, now we can switch to select()+recv().
Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211008203306.37525-5-xiyou.wangcong@gmail.com
|
|
Yucong noticed we can't poll() sockets in sockmap even
when they are the destination sockets of redirections.
This is because we never poll any psock queues in ->poll(),
except for TCP. With ->sock_is_readable() now we can
overwrite >sock_is_readable(), invoke and implement it for
both UDP and AF_UNIX sockets.
Reported-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211008203306.37525-4-xiyou.wangcong@gmail.com
|
