| Age | Commit message (Collapse) | Author |
|---|
|
In SHOW(), the variable 'n' is of type 'size_t.' While there is a
conditional check to verify that 'n' is not equal to zero before
executing the 'do_div' macro, concerns arise regarding potential
division by zero error in 64-bit environments.
The concern arises when 'n' is 64 bits in size, greater than zero, and
the lower 32 bits of it are zeros. In such cases, the conditional check
passes because 'n' is non-zero, but the 'do_div' macro casts 'n' to
'uint32_t,' effectively truncating it to its lower 32 bits.
Consequently, the 'n' value becomes zero.
To fix this potential division by zero error and ensure precise
division handling, this commit replaces the 'do_div' macro with
div64_u64(). div64_u64() is designed to work with 64-bit operands,
guaranteeing that division is performed correctly.
This change enhances the robustness of the code, ensuring that division
operations yield accurate results in all scenarios, eliminating the
possibility of division by zero, and improving compatibility across
different 64-bit environments.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Variable cur_idx is being initialized with a value that is never read,
it is being re-assigned later in a while-loop. Remove the redundant
assignment. Cleans up clang scan build warning:
drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In btree_gc_rewrite_node(), pointer 'n' is not checked after it returns
from btree_gc_rewrite_node(). There is potential possibility that 'n' is
a non NULL ERR_PTR(), referencing such error code is not permitted in
following code. Therefore a return value checking is necessary after 'n'
is back from btree_node_alloc_replacement().
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231120052503.6122-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.
Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.
For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.
To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
set its stripe size by a value multiplying limits.io_opt and euqal or
large than BCH_MIN_STRIPE_SZ.
Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.
Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.
Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328
and RK3399 result in wrong colors being displayed.
The issue can be observed using modetest:
modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24
modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24
Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP
full framework (IP version 3.x) compared to VOP little framework (2.x).
Fix colors by applying different rb swap for VOP full framework (3.x)
and VOP little framework (2.x) similar to vendor 4.4 kernel.
Fixes: 85a359f25388 ("drm/rockchip: Add BGR formats to VOP")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se
|
|
In order for `AT_EMPTY_PATH` to work as expected, the fact
that the user wants that behavior needs to make it to `getname_flags`
or it will return ENOENT.
Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT")
Cc: <stable@vger.kernel.org>
Link: https://github.com/axboe/liburing/issues/995
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Link: https://lore.kernel.org/r/20231120105545.1209530-1-cmirabil@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new directory offset helpers don't conform with the convention
of getdents() returning no more entries once a directory file
descriptor has reached the current end-of-directory.
To address this, copy the logic from dcache_readdir() to mark the
open directory file descriptor once EOD has been reached. Seeking
resets the mark.
Reported-by: Tavian Barnes <tavianator@tavianator.com>
Closes: https://lore.kernel.org/linux-fsdevel/20231113180616.2831430-1-tavianator@tavianator.com/
Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170043792492.4628.15646203084646716134.stgit@bazille.1015granger.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update the per-folio stable writes flag dependening on which device an
inode resides on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-5-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Introduce a local boolean variable if FS_XFLAG_REALTIME to make the
checks for it more obvious, and de-densify a few of the conditionals
using it to make them more readable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Propagate the per-queue stable_write flags into each bdev inode in bdev_add.
This makes sure devices that require stable writes have it set for I/O
on the block device node as well.
Note that this doesn't cover the case of a flag changing on a live device
yet. We should handle that as well, but I plan to cover it as part of a
more general rework of how changing runtime paramters on block devices
works.
Fixes: 1cb039f3dc16 ("bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-3-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
folio_wait_stable waits for writeback to finish before modifying the
contents of a folio again, e.g. to support check summing of the data
in the block integrity code.
Currently this behavior is controlled by the SB_I_STABLE_WRITES flag
on the super_block, which means it is uniform for the entire file system.
This is wrong for the block device pseudofs which is shared by all
block devices, or file systems that can use multiple devices like XFS
witht the RT subvolume or btrfs (although btrfs currently reimplements
folio_wait_stable anyway).
Add a per-address_space AS_STABLE_WRITES flag to control the behavior
in a more fine grained way. The existing SB_I_STABLE_WRITES is kept
to initialize AS_STABLE_WRITES to the existing default which covers
most cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-2-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add missing NULL check of root_inode in autofs_fill_super().
While we are at it simplify the logic by taking advantage of the VFS
cleanup procedures and get rid of the goto error handling, as suggested
by Al Viro.
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20231119225319.331156-1-raven@themaw.net
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Bill O'Donnell <billodo@redhat.com>
Reported-by: <syzbot+662f87a8ef490f45fa64@syzkaller.appspotmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.
Sample leak report:
BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
kmem_cache_alloc+0x25b/0x270
__i915_request_create+0x75/0x610 [i915]
i915_request_create+0x109/0x290 [i915]
__engines_record_defaults+0xca/0x440 [i915]
intel_gt_init+0x275/0x430 [i915]
i915_gem_init+0x135/0x2c0 [i915]
i915_driver_probe+0x8d1/0xdc0 [i915]
v2: removed whole intel_gt_release_all
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9ea42 ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com
(cherry picked from commit e899505533852bf1da133f2f4c9a9655ff77f7e5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
After drm_connector_init() is called the connector is visible to the
rest of the kernel via the drm_mode_config::connector_list. Make
sure that the DSC AUX device and capabilities are setup by that time.
Another race condition is adding the connector to the connector list
before drm_connector_helper_add() sets the connector helper functions.
That's an unrelated issue, for which the fix is for a follow-up. One
solution would be adding the connector to the connector list only
during its registration in drm_connector_register().
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 808b43fa7e56 ("drm/i915/dp_mst: Set connector DSC capabilities and decompression AUX")
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-2-imre.deak@intel.com
(cherry picked from commit 560ea72c76eb6d0c59f77580414e64cc09f1093d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
md_end_clone_io() may overwrite error status in orig_bio->bi_status with
BLK_STS_OK. This could happen when orig_bio has BIO_CHAIN (split by
md_submit_bio => bio_split_to_limits, for example). As a result, upper
layer may miss error reported from md (or the device) and consider the
failed IO was successful.
Fix this by only update orig_bio->bi_status when current bio reports
error and orig_bio is BLK_STS_OK. This is the same behavior as
__bio_chain_endio().
Fixes: 10764815ff47 ("md: add io accounting for raid0 and raid5")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Bhanu Victor DiCara <00bvd0+linux@gmail.com>
Closes: https://lore.kernel.org/regressions/5727380.DvuYhMxLoT@bvd0/
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
|
|
Add missing error return check for devm_ioport_map() and return the
error if this function call fails.
Fixes: 0d5ff566779f ("libata: convert to iomap")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix section mismatch warning messages for riscv and loongarch
- Remove CONFIG_IA64 left-over from linux/export-internal.h
- Fix the location of the quotes for UIMAGE_NAME
- Fix a memory leak bug in Kconfig
* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix memory leak from range properties
kbuild: Move the single quotes for image name
linux/export: clean up the IA-64 KSYM_FUNC macro
modpost: fix section mismatch message for RELA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Flush the translation service tables to prevent unpredictable
behavior on non-coherent GIC devices
* tag 'irq_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Ignore invalid x2APIC entries
x86/shstk: Delay signal entry SSP write until after user accesses
x86/Documentation: Indent 'note::' directive for protocol version number note
MAINTAINERS: Add Intel TDX entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do the push of pending hrtimers away from a CPU which is being
offlined earlier in the offlining process in order to prevent a
deadlock
* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Push pending hrtimers away from outgoing CPU earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix virtual runtime calculation when recomputing a sched entity's
weights
- Fix wrongly rejected unprivileged poll requests to the cgroup psi
pressure files
- Make sure the load balancing is done by only one CPU
* tag 'sched_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix the decision for load balance
sched: psi: fix unprivileged polling against cgroups
sched/eevdf: Fix vruntime adjustment on reweight
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a hardcoded futex flags case which lead to one robust futex test
failure
* tag 'locking_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix hardcoded flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Make sure the context refcount is transferred too when migrating perf
events
* tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix cpuctx refcounting
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the sock diag modules in one fell swoop.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During 'ifconfig <netdev> down' one RSS memory was not getting freed.
This patch fixes the same.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
wg_xmit() can be called concurrently, KCSAN reported [1]
some device stats updates can be lost.
Use DEV_STATS_INC() for this unlikely case.
[1]
BUG: KCSAN: data-race in wg_xmit / wg_xmit
read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
v2: also change wg_packet_consume_data_done() (Hangbin Liu)
and wg_packet_purge_staged_packets()
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the device uses a custom subsystem vendor ID, the function
wx_sw_init() returns before the memory of 'wx->mac_table' is allocated.
The null pointer will causes the kernel panic.
Fixes: 79625f45ca73 ("net: wangxun: Move MAC address handling to libwx")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Innolux G101ICE-L01 datasheet [1] page 17 table
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
indicates that maximum vertical blanking time is 40 lines.
Currently the driver uses 29 lines.
Fix it, and since this panel is a DE panel, adjust the timings
to make them less hostile to controllers which cannot do 1 px
HSA/VSA, distribute the delays evenly between all three parts.
[1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf
Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
|
|
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description,
ones which match both the datasheet and the panel display_timing flags .
Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven small fixes, six in drivers and one in sd.
The sd fix is so large because it changes a struct pointer to a struct
but otherwise is fairly simple"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
scsi: sd: Fix sshdr use in sd_suspend_common()
scsi: scsi_debug: Delete some bogus error checking
scsi: scsi_debug: Fix some bugs in sdebug_error_write()
scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
scsi: qla2xxx: Fix system crash due to bad pointer access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"On parisc we still sometimes need writeable stacks, e.g. if programs
aren't compiled with gcc-14. To avoid issues with the upcoming
systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now
(for parisc only).
The other two patches are minor: a bugfix for the soft power-off on
qemu with 64-bit kernel and prefer strscpy() over strlcpy():
- Fix power soft-off on qemu
- Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
writeable stacks
- Use strscpy instead of strlcpy in show_cpuinfo()"
* tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
prctl: Disable prctl(PR_SET_MDWE) on parisc
parisc/power: Fix power soft-off when running on qemu
parisc: Replace strlcpy() with strscpy()
|
|
Pull xfs fixes from Chandan Babu:
- Fix deadlock arising due to intent items in AIL not being cleared
when log recovery fails
- Fix stale data exposure bug when remapping COW fork extents to data
fork
- Fix deadlock when data device flush fails
- Fix AGFL minimum size calculation
- Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
selected
- Fix corruption of log inode's extent count field when NREXT64 feature
is enabled
* tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: recovery should not clear di_flushiter unconditionally
xfs: inode recovery does not validate the recovered inode
xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
xfs: fix internal error from AGFL exhaustion
xfs: up(ic_sema) if flushing data device fails
xfs: only remap the written blocks in xfs_reflink_end_cow_extent
XFS: Update MAINTAINERS to catch all XFS documentation
xfs: abort intent items when recovery intents fail
xfs: factor out xfs_defer_pending_abort
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix several long-standing bugs in the duplicate reply cache
- Fix a memory leak
* tag 'nfsd-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix checksum mismatches in the duplicate reply cache
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
NFSD: Update nfsd_cache_append() to use xdr_stream
nfsd: fix file memleak on client_opens_release
|
|
Pull smb client fixes from Steve French:
- multichannel fixes (including a lock ordering fix and an important
refcounting fix)
- spnego fix
* tag '6.7-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix lock ordering while disabling multichannel
cifs: fix leak of iface for primary channel
cifs: fix check of rc in function generate_smb3signingkey
cifs: spnego: add ';' in HOST_KEY_LEN
|
|
systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.
Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775
Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Various fixes for the DM delay target to address regressions
introduced during the 6.7 merge window
- Fixes to both DM bufio and the verity target for no-sleep mode,
to address sleeping while atomic issues
- Update DM crypt target in response to the treewide change that
made MAX_ORDER inclusive
* tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt: start allocating with MAX_ORDER
dm-verity: don't use blocking calls from tasklets
dm-bufio: fix no-sleep mode
dm-delay: avoid duplicate logic
dm-delay: fix bugs introduced by kthread mode
dm-delay: fix a race between delay_presuspend and delay_bio
|
|
Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.
Fixes: d0c219472980 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Revert a not-working conversion to generic recovery for PXA,
use proper IO accessors for designware, and use proper PM level
for ocores to allow accessing interrupt providers late"
* tag 'i2c-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ocores: Move system PM hooks to the NOIRQ phase
i2c: designware: Fix corrupted memory seen in the ISR
Revert "i2c: pxa: move to generic GPIO recovery"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Turbostat features are now table-driven (Rui Zhang)
- Add support for some new platforms (Sumeet Pawnikar, Rui Zhang)
- Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas
Pandruvada)
- misc minor fixes
[ This came in during the merge window, but sorting out the signed tag
took a while, so thus the late merge - Linus ]
* tag 'turbostat-2023.11.07' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (86 commits)
tools/power turbostat: version 2023.11.07
tools/power/turbostat: bugfix "--show IPC"
tools/power/turbostat: Add initial support for LunarLake
tools/power/turbostat: Add initial support for ArrowLake
tools/power/turbostat: Add initial support for GrandRidge
tools/power/turbostat: Add initial support for SierraForest
tools/power/turbostat: Add initial support for GraniteRapids
tools/power/turbostat: Add MSR_CORE_C1_RES support for spr_features
tools/power/turbostat: Move process to root cgroup
tools/power/turbostat: Handle cgroup v2 cpu limitation
tools/power/turbostat: Abstrct function for parsing cpu string
tools/power/turbostat: Handle offlined CPUs in cpu_subset
tools/power/turbostat: Obey allowed CPUs for system summary
tools/power/turbostat: Obey allowed CPUs for primary thread/core detection
tools/power/turbostat: Abstract several functions
tools/power/turbostat: Obey allowed CPUs during startup
tools/power/turbostat: Obey allowed CPUs when accessing CPU counters
tools/power/turbostat: Introduce cpu_allowed_set
tools/power/turbostat: Remove PC7/PC9 support on ADL/RPL
tools/power/turbostat: Enable MSR_CORE_C1_RES on recent Intel client platforms
...
|
|
The recent conversion to inline functions made two mistakes:
1. It tries to copy the full amount requested (bytes), not just what's
available in the kmap'd page (n).
2. It's not applying the offset in the first page.
Note that copy_page_to_iter_nofault() is only used by /proc/kcore. This
was detected by drgn's test suite.
Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/c1616e06b5248013cbbb1881bb4fef85a7a69ccb.1700257019.git.osandov@fb.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When vfs_getattr_nosec() calls a filesystem's getattr interface function
then the 'nosec' should propagate into this function so that
vfs_getattr_nosec() can again be called from the filesystem's gettattr
rather than vfs_getattr(). The latter would add unnecessary security
checks that the initial vfs_getattr_nosec() call wanted to avoid.
Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass
with the new getattr_flags parameter to the getattr interface function.
In overlayfs and ecryptfs use this flag to determine which one of the
two functions to call.
In a recent code change introduced to IMA vfs_getattr_nosec() ended up
calling vfs_getattr() in overlayfs, which in turn called
security_inode_getattr() on an exiting process that did not have
current->fs set anymore, which then caused a kernel NULL pointer
dereference. With this change the call to security_inode_getattr() can
be avoided, thus avoiding the NULL pointer dereference.
Reported-by: <syzbot+a67fc5321ffb4b311c98@syzkaller.appspotmail.com>
Fixes: db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Co-developed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This NULL check was required when it was added, but we shuffled the code
around and now it's not. The inconsistent NULL checking triggers a
Smatch warning:
drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:847 mdp5_init() warn:
variable dereferenced before check 'mdp5_kms' (see line 782)
Fixes: 1f50db2f3e1e ("drm/msm/mdp5: move resource allocation to the _probe function")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/562559/
Link: https://lore.kernel.org/r/ZSj+6/J6YsoSpLak@kadam
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of small fixes for minor nits and compiler warnings.
Bigger items:
- The six locks lost wakeup is finally fixed: six_read_trylock() was
checking for the waiting bit before decrementing the number of
readers - validated the fix with a torture test.
- Fix for a memory reclaim issue: when needing to reallocate a key
cache key, we now do our usual GFP_NOWAIT; unlock(); GFP_KERNEL
dance.
- Multiple deleted inodes btree fixes
- Fix an issue in fsck, where i_nlink would be recalculated
incorrectly for hardlinked files if a snapshot had ever been taken.
- Kill journal pre-reservations: This is a bigger patch than I would
normally send at this point, but it deletes code and it fixes some
of our tests that would sporadically die with the journal getting
stuck, and it's a performance improvement, too"
* tag 'bcachefs-2023-11-17' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Fix missing locking for dentry->d_parent access
bcachefs: six locks: Fix lost wakeup
bcachefs: Fix no_data_io mode checksum check
bcachefs: Fix bch2_check_nlinks() for snapshots
bcachefs: Don't decrease BTREE_ITER_MAX when LOCKDEP=y
bcachefs: Disable debug log statements
bcachefs: Fix missing transaction commit
bcachefs: Fix error path in bch2_mount()
bcachefs: Fix potential sleeping during mount
bcachefs: Fix iterator leak in may_delete_deleted_inode()
bcachefs: Kill journal pre-reservations
bcachefs: Check for nonce offset inconsistency in data_update path
bcachefs: Make sure to drop/retake btree locks before reclaim
bcachefs: btree_trans->write_locked
bcachefs: Run btree key cache shrinker less aggressively
bcachefs: Split out btree_key_cache_types.h
bcachefs: Guard against insufficient devices to create stripes
bcachefs: Fix null ptr deref in bch2_backpointer_get_node()
bcachefs: Fix multiple -Warray-bounds warnings
bcachefs: Use DECLARE_FLEX_ARRAY() helper and fix multiple -Warray-bounds warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Thirteen hotfixes. Seven are cc:stable and the remainder pertain to
post-6.6 issues or aren't considered suitable for backporting"
* tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: more ptep_get() conversion
parisc: fix mmap_base calculation when stack grows upwards
mm/damon/core.c: avoid unintentional filtering out of schemes
mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
mm/damon/sysfs-schemes: handle tried region directory allocation failure
mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure
mm/damon/sysfs: check error from damon_sysfs_update_target()
mm: fix for negative counter: nr_file_hugepages
selftests/mm: add hugetlb_fault_after_madv to .gitignore
selftests/mm: restore number of hugepages
selftests: mm: fix some build warnings
selftests: mm: skip whole test instead of failure
mm/damon/sysfs: eliminate potential uninitialized variable warning
|
|
Pull block fix from Jens Axboe:
"Just a single fix from Christoph/Ming, fixing a case where integrity
IO could be called without having an appropriate queue reference"
* tag 'block-6.7-2023-11-17' of git://git.kernel.dk/linux:
blk-mq: make sure active queue usage is held for bio_integrity_prep()
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fixup for a change we made in this release, which caused
a regression in sometimes missing fdinfo output if the SQPOLL thread
had the lock held when fdinfo output was retrieved.
This brings us back on par with what we had before, where just the
main uring_lock will prevent that output. We'd love to get rid of that
too, but that is beyond the scope of this release and will have to
wait for 6.8"
* tag 'io_uring-6.7-2023-11-17' of git://git.kernel.dk/linux:
io_uring/fdinfo: remove need for sqpoll lock for thread/pid retrieval
|
|
Pull drm fixes from Daniel Vetter:
"This is a 'blast from the bast' fixes pull, because it contains a
bunch of AGP fixes for amdgpu. Otherwise nothing out of the ordinary.
Next week is back to Dave unless he's knocked out by some conference
bug.
- amdgpu: fixes all over, including a set of AGP fixes
- nouvea: GSP + other bugfixes
- ivpu build fix
- lenovo legion go panel orientation quirk"
* tag 'drm-fixes-2023-11-17' of git://anongit.freedesktop.org/drm/drm: (30 commits)
drm/amdgpu/gmc9: disable AGP aperture
drm/amdgpu/gmc10: disable AGP aperture
drm/amdgpu/gmc11: disable AGP aperture
drm/amdgpu: add a module parameter to control the AGP aperture
drm/amdgpu/gmc11: fix logic typo in AGP check
drm/amd/display: Fix encoder disable logic
drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
drm/amdgpu: add and populate the port num into xgmi topology info
drm/amd/display: Negate IPS allow and commit bits
drm/amd/pm: Don't send unload message for reset
drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.c
drm/amd/display: Clear dpcd_sink_ext_caps if not set
drm/amd/display: Enable fast plane updates on DCN3.2 and above
drm/amd/display: fix NULL dereference
drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()
drm/amd/display: Add null checks for 8K60 lightup
drm/amd/pm: Fill pcie error counters for gpu v1_4
drm/amd/pm: Update metric table for smu v13_0_6
drm/amdgpu: correct chunk_ptr to a pointer to chunk.
drm/amd/display: Fix DSC not Enabled on Direct MST Sink
...
|
|
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that
MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high.
Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel")
Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
|
