| Age | Commit message (Collapse) | Author |
|---|
|
Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev
object replay helpers to "push" mode") the switchdev_bridge_port_offload()
helper was extended with the intention to provide switchdev drivers easy
access to object addition and deletion replays. This works by calling
the replay helpers with non-NULL notifier blocks.
In the same commit, the dpaa2-switch driver was updated so that it
passes valid notifier blocks to the helper. At that moment, no
regression was identified through testing.
In the meantime, the blamed commit changed the behavior in terms of
which ports get hit by the replay. Before this commit, only the initial
port which identified itself as offloaded through
switchdev_bridge_port_offload() got a replay of all port objects and
FDBs. After this, the newly joining port will trigger a replay of
objects on all bridge ports and on the bridge itself.
This behavior leads to errors in dpaa2_switch_port_vlans_add() when a
VLAN gets installed on the same interface multiple times.
The intended mechanism to address this is to pass a non-NULL ctx to the
switchdev_bridge_port_offload() helper and then check it against the
port's private structure. But since the driver does not have any use for
the replayed port objects and FDBs until it gains support for LAG
offload, it's better to fix the issue by reverting the dpaa2-switch
driver to not ask for replay. The pointers will be added back when we
are prepared to ignore replays on unrelated ports.
Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of the DMA unmap was wrongly put as a sizeof of a pointer.
Change the value of the DMA unmap to be the actual macro used for the
allocation and the DMA map.
Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once again syzbot is able to crash the kernel in skb_segment() [1]
GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :
mss = mss * partial_segs;
65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.
Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes
Pull Rockchip clk driver fixes for the merge window from Heiko Stuebner:
Fixes for a wrong clockname, a wrong clock-parent, a wrong clock-gate
and finally one new PLL rate for the rk3568 to fix display artifacts
on a handheld devices based on that soc.
* tag 'v6.7-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name
clk: rockchip: rk3128: Fix aclk_peri_src's parent
clk: rockchip: rk3128: Fix HCLK_OTG gate register
clk: rockchip: rk3568: Add PLL rate for 292.5MHz
|
|
This can only happen when there is a reference counting bug.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When freeing PD/PT with shadows it can happen that the shadow
destruction races with detaching the PD/PT from the VM causing a NULL
pointer dereference in the invalidation code.
Fix this by detaching the the PD/PT from the VM first and then
freeing the shadow instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to
early_init for SDMA v2.4") made a fateful mistake in
`adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode()
was run. This caused probing to fail.
Move the declaration to right before sdma_v2_4_init_microcode().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043
Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add begin/end_use ring callbacks to disallow GFXOFF when
SDMA work is submitted and allow it again afterward.
This should avoid corner cases where GFXOFF is erroneously
entered when SDMA is still active. For now just allow/disallow
GFXOFF in the begin and end helpers until we root cause the
issue. This should not impact power as SDMA usage is pretty
minimal and GFXOSS should not be active when SDMA is active
anyway, this just makes it explicit.
v2: move everything into sdma5.2 code. No reason for this
to be generic at this point.
v3: Add comments in new code
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
|
|
There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.
Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ufs fix from Al Viro:
"ufs got broken this merge window on folio conversion - calling
conventions for filemap_lock_folio() are not the same as for
find_lock_page()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix ufs_get_locked_folio() breakage
|
|
This reverts commit f3f32a356c0d2379d4431364e74f101f8f075ce3.
Paolo reports that the change disables autocorking even after
the userspace sets TCP_CORK.
Fixes: f3f32a356c0d ("tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set")
Link: https://lore.kernel.org/r/0d30d5a41d3ac990573016308aaeacb40a9dc79f.camel@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Deal with a regression in the recently refactored x86 EFI stub code
on older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Avoid physical KASLR on older Dell systems
efi/loongarch: Use load address to calculate kernel entry address
|
|
The ltk050h3148w variant expects the horizontal component lane byte clock
cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the
pixel clock.
Using the pixel clock rate by default for this calculation was introduced
in commit ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock
rate to calculate lbcc") and starting from commit 93e82bb4de01
("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
only panels that support burst mode can keep using the lane_mbps. So add
MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host.
Fixes: 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com
|
|
filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not
in cache - not NULL like find_lock_page() used to.
Fixes: 5fb7bd50b351 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There are a few quirks around using lazy wake for poll unconditionally,
and one of them is related the EPOLLEXCLUSIVE. Those may trigger
exclusive wakeups, which wake a limited number of entries in the wait
queue. If that wake number is less than the number of entries someone is
waiting for (and that someone is also using DEFER_TASKRUN), then we can
get stuck waiting for more entries while we should be processing the ones
we already got.
If we're doing exclusive poll waits, flag the request as not being
compatible with lazy wakeups.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Aneesh and Naveen are helping out with some aspects of upstream
maintenance, add them as reviewers.
Acked-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Acked-by: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231205051105.736470-1-mpe@ellerman.id.au
|
|
The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
// No DLPAR CPU or migration
add window to the list
// Window will be added to the
// list after the setup is completed
unlock vas_pseries_mutex
return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY
This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
struct
- This counter tracks the number of open windows are still in
progress
- The allocate setup window thread closes windows if the migration
is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.
The code flow with the fix is as follows:
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
unlock vas_pseries_mutex
lock vas_pseries_mutex sleep
if nr_closed_windows == 0 // Wait if any open window in
or migration is not started // progress. The open window
// No DLPAR CPU or migration // thread closes the window without
add window to the list // adding to the list and return if
nr_open_wins_progress-- // the migration is in progress.
unlock vas_pseries_mutex
return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return
Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
|
|
Yanteng Si says:
====================
stmmac: Some bug fixes
* Put Krzysztof's patch into my thread, pick Conor's Reviewed-by
tag and Jiaxun's Acked-by tag.(prev version is RFC patch)
* I fixed an Oops related to mdio, mainly to ensure that
mdio is initialized before use, because it will be used
in a series of patches I am working on.
see <https://lore.kernel.org/loongarch/cover.1699533745.git.siyanteng@loongson.cn/T/#t>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Originally was in the panel-simple, but belongs to panel-simple-dsi.
See arch/arm/boot/dts/nvidia/tegra114-roth.dts for more details.
Resolves the following warning:
```
arch/arm/boot/dts/tegra114-roth.dt.yaml: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/panel/panel-simple.yaml
```
Fixes: 310abcea76e9 ("dt-bindings: display: convert simple lg panels to DT Schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231212200934.99262-1-david@ixit.cz
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212200934.99262-1-david@ixit.cz
|
|
Based on the tcp man page, if TCP_NODELAY is set, it disables Nagle's algorithm
and packets are sent as soon as possible. However in the `tcp_push` function
where autocorking is evaluated the `nonagle` value set by TCP_NODELAY is not
considered which can trigger unexpected corking of packets and induce delays.
For example, if two packets are generated as part of a server's reply, if the
first one is not transmitted on the wire quickly enough, the second packet can
trigger the autocorking in `tcp_push` and be delayed instead of sent as soon as
possible. It will either wait for additional packets to be coalesced or an ACK
from the client before transmitting the corked packet. This can interact badly
if the receiver has tcp delayed acks enabled, introducing 40ms extra delay in
completion times. It is not always possible to control who has delayed acks
set, but it is possible to adjust when and how autocorking is triggered.
Patch prevents autocorking if the TCP_NODELAY flag is set on the socket.
Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and
Apache Tomcat 9.0.83 running the basic servlet below:
import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class HelloWorldServlet extends HttpServlet {
@Override
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=utf-8");
OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
String s = "a".repeat(3096);
osw.write(s,0,s.length());
osw.flush();
}
}
Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance. With the current auto-corking behavior and TCP_NODELAY
set an additional 40ms latency from P99.99+ values are observed. With the
patch applied we see no occurrences of 40ms latencies. The patch has also been
tested with iperf and uperf benchmarks and no regression was observed.
# No patch with tcp_autocorking=1 and TCP_NODELAY set on all sockets
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.91ms
75.000% 1.12ms
90.000% 1.46ms
99.000% 1.73ms
99.900% 1.96ms
99.990% 43.62ms <<< 40+ ms extra latency
99.999% 48.32ms
100.000% 49.34ms
# With patch
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.89ms
75.000% 1.13ms
90.000% 1.44ms
99.000% 1.67ms
99.900% 1.78ms
99.990% 2.27ms <<< no 40+ ms extra latency
99.999% 3.71ms
100.000% 4.57ms
Fixes: f54b311142a9 ("tcp: auto corking")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20231211
1. mtk_disp_gamma: Fix breakage due to merge issue
2. fix kernel oops if no crtc is found
3. Add spinlock for setting vblank event in atomic_begin
4. Fix access violation in mtk_drm_crtc_dma_dev_get
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211151510.6749-1-chunkuang.hu@kernel.org
|
|
If for some reason the trace_marker write does not have a nul byte for the
string, it will overflow the print:
trace_seq_printf(s, ": %s", field->buf);
The field->buf could be missing the nul byte. To prevent overflow, add the
max size that the buf can be by using the event size and the field
location.
int max = iter->ent_size - offsetof(struct print_entry, buf);
trace_seq_printf(s, ": %*.s", max, field->buf);
Link: https://lore.kernel.org/linux-trace-kernel/20231212084444.4619b8ce@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
For the ring buffer iterator (non-consuming read), the event needs to be
copied into the iterator buffer to make sure that a writer does not
overwrite it while the user is reading it. If a write happens during the
copy, the buffer is simply discarded.
But the temp buffer itself was not big enough. The allocation of the
buffer was only BUF_MAX_DATA_SIZE, which is the maximum data size that can
be passed into the ring buffer and saved. But the temp buffer needs to
hold the meta data as well. That would be BUF_PAGE_SIZE and not
BUF_MAX_DATA_SIZE.
Link: https://lore.kernel.org/linux-trace-kernel/20231212072558.61f76493@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 785888c544e04 ("ring-buffer: Have rb_iter_head_event() handle concurrent writer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The ring buffer timestamps are synchronized by two timestamp placeholders.
One is the "before_stamp" and the other is the "write_stamp" (sometimes
referred to as the "after stamp" but only in the comments. These two
stamps are key to knowing how to handle nested events coming in with a
lockless system.
When moving across sub-buffers, the before stamp is updated but the write
stamp is not. There's an effort to put back the before stamp to something
that seems logical in case there's nested events. But as the current event
is about to cross sub-buffers, and so will any new nested event that happens,
updating the before stamp is useless, and could even introduce new race
conditions.
The first event on a sub-buffer simply uses the sub-buffer's timestamp
and keeps a "delta" of zero. The "before_stamp" and "write_stamp" are not
used in the algorithm in this case. There's no reason to try to fix the
before_stamp when this happens.
As a bonus, it removes a cmpxchg() when crossing sub-buffers!
Link: https://lore.kernel.org/linux-trace-kernel/20231211114420.36dde01b@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In the effort to reduce zombie memcgs [1], it was discovered that the
memcg LRU doesn't apply enough pressure on offlined memcgs. Specifically,
instead of rotating them to the tail of the current generation
(MEMCG_LRU_TAIL) for a second attempt, it moves them to the next
generation (MEMCG_LRU_YOUNG) after the first attempt.
Not applying enough pressure on offlined memcgs can cause them to build
up, and this can be particularly harmful to memory-constrained systems.
On Pixel 8 Pro, launching apps for 50 cycles:
Before After Change
Zombie memcgs 45 35 -22%
[1] https://lore.kernel.org/CABdmKX2M6koq4Q0Cmp_-=wbP0Qa190HdEGGaHfxNS05gAkUtPA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20231208061407.2125867-4-yuzhao@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: T.J. Mercier <tjmercier@google.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While investigating kswapd "consuming 100% CPU" [1] (also see "mm/mglru:
try to stop at high watermarks"), it was discovered that the memcg LRU can
breach the thrashing protection imposed by min_ttl_ms.
Before the memcg LRU:
kswapd()
shrink_node_memcgs()
mem_cgroup_iter()
inc_max_seq() // always hit a different memcg
lru_gen_age_node()
mem_cgroup_iter()
check the timestamp of the oldest generation
After the memcg LRU:
kswapd()
shrink_many()
restart:
iterate the memcg LRU:
inc_max_seq() // occasionally hit the same memcg
if raced with lru_gen_rotate_memcg():
goto restart
lru_gen_age_node()
mem_cgroup_iter()
check the timestamp of the oldest generation
Specifically, when the restart happens in shrink_many(), it needs to stick
with the (memcg LRU) generation it began with. In other words, it should
neither re-read memcg_lru->seq nor age an lruvec of a different
generation. Otherwise it can hit the same memcg multiple times without
giving lru_gen_age_node() a chance to check the timestamp of that memcg's
oldest generation (against min_ttl_ms).
[1] https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/
Link: https://lkml.kernel.org/r/20231208061407.2125867-3-yuzhao@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The initial MGLRU patchset didn't include the memcg LRU support, and it
relied on should_abort_scan(), added by commit f76c83378851 ("mm:
multi-gen LRU: optimize multiple memcgs"), to "backoff to avoid
overshooting their aggregate reclaim target by too much".
Later on when the memcg LRU was added, should_abort_scan() was deemed
unnecessary, and the test results [1] showed no side effects after it was
removed by commit a579086c99ed ("mm: multi-gen LRU: remove eviction
fairness safeguard").
However, that test used memory.reclaim, which sets nr_to_reclaim to
SWAP_CLUSTER_MAX. So it can overshoot only by SWAP_CLUSTER_MAX-1 pages,
i.e., from nr_reclaimed=nr_to_reclaim-1 to
nr_reclaimed=nr_to_reclaim+SWAP_CLUSTER_MAX-1. Compared with the batch
size kswapd sets to nr_to_reclaim, SWAP_CLUSTER_MAX is tiny. Therefore
that test isn't able to reproduce the worst case scenario, i.e., kswapd
overshooting GBs on large systems and "consuming 100% CPU" (see the Closes
tag).
Bring back a simplified version of should_abort_scan() on top of the memcg
LRU, so that kswapd stops when all eligible zones are above their
respective high watermarks plus a small delta to lower the chance of
KSWAPD_HIGH_WMARK_HIT_QUICKLY. Note that this only applies to order-0
reclaim, meaning compaction-induced reclaim can still run wild (which is a
different problem).
On Android, launching 55 apps sequentially:
Before After Change
pgpgin 838377172 802955040 -4%
pgpgout 38037080 34336300 -10%
[1] https://lore.kernel.org/20221222041905.2431096-1-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20231208061407.2125867-2-yuzhao@google.com
Fixes: a579086c99ed ("mm: multi-gen LRU: remove eviction fairness safeguard")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Closes: https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unmapped folios accessed through file descriptors can be underprotected.
Those folios are added to the oldest generation based on:
1. The fact that they are less costly to reclaim (no need to walk the
rmap and flush the TLB) and have less impact on performance (don't
cause major PFs and can be non-blocking if needed again).
2. The observation that they are likely to be single-use. E.g., for
client use cases like Android, its apps parse configuration files
and store the data in heap (anon); for server use cases like MySQL,
it reads from InnoDB files and holds the cached data for tables in
buffer pools (anon).
However, the oldest generation can be very short lived, and if so, it
doesn't provide the PID controller with enough time to respond to a surge
of refaults. (Note that the PID controller uses weighted refaults and
those from evicted generations only take a half of the whole weight.) In
other words, for a short lived generation, the moving average smooths out
the spike quickly.
To fix the problem:
1. For folios that are already on LRU, if they can be beyond the
tracking range of tiers, i.e., five accesses through file
descriptors, move them to the second oldest generation to give them
more time to age. (Note that tiers are used by the PID controller
to statistically determine whether folios accessed multiple times
through file descriptors are worth protecting.)
2. When adding unmapped folios to LRU, adjust the placement of them so
that they are not too close to the tail. The effect of this is
similar to the above.
On Android, launching 55 apps sequentially:
Before After Change
workingset_refault_anon 25641024 25598972 0%
workingset_refault_file 115016834 106178438 -8%
Link: https://lkml.kernel.org/r/20231208061407.2125867-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Split folios during the second loop of shmem_undo_range. It's not
sufficient to only split folios when dealing with partial pages, since
it's possible for a THP to be faulted in after that point. Calling
truncate_inode_folio in that situation can result in throwing away data
outside of the range being targeted.
[akpm@linux-foundation.org: tidy up comment layout]
Link: https://lkml.kernel.org/r/20230418084031.3439795-1-stevensd@google.com
Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios")
Signed-off-by: David Stevens <stevensd@chromium.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 9fc96c7c19df ("selftests: error out if kernel header
files are not yet built").
It turns out that requiring the kernel headers to be built as a
prerequisite to building selftests, does not work in many cases. For
example, Peter Zijlstra writes:
"My biggest beef with the whole thing is that I simply do not want to use
'make headers', it doesn't work for me.
I have a ton of output directories and I don't care to build tools into
the output dirs, in fact some of them flat out refuse to work that way
(bpf comes to mind)." [1]
Therefore, stop erroring out on the selftests build. Additional patches
will be required in order to change over to not requiring the kernel
headers.
[1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net
Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If crash_base is equal to CRASH_ADDR_LOW_MAX, it also indicates that
the crashkernel memory is allocated from high memory. However, the
current check only considers the case where crash_base is greater than
CRASH_ADDR_LOW_MAX. Fix it.
The runtime effects is that crashkernel high memory is successfully
reserved, whereas the crashkernel low memory is bypassed in this case,
then kdump kernel bootup will fail because of no low memory under 4G.
This patch also includes some minor cleanups.
Link: https://lkml.kernel.org/r/20231209141438.77233-1-ytcoode@gmail.com
Fixes: 0ab97169aa05 ("crash_core: add generic function to do reservation")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With the current ifdeffery CONFIG_KEXEC, get_cmdline_acpi_rsdp() is only
available when kexec_load interface is taken, while kexec_file_load
interface can't make use of it.
Now change it to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config
items are set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
Here, change the dependency of building kexec_core related object files,
and the ifdeffery on SuperH from CONFIG_KEXEC to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------
Here, change the dependency of building kexec_core related object files,
and the ifdeffery in mips from CONFIG_KEXEC to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302042.sn8cDPIX-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
Here, change the dependency of buinding machine_kexec.o relocate_kernel.o
and the ifdeffery in asm/kexe.h to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kexec: fix the incorrect ifdeffery and dependency of
CONFIG_KEXEC".
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
E.g on mips, below link error are seen:
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------
Here, change the incorrect dependency of building kexec_core related
object files, and the ifdeffery on architectures from CONFIG_KEXEC to
CONFIG_KEXEC_CORE.
Testing:
========
Passed on mips and loognarch with the LKP reproducer.
This patch (of 5):
Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o
relocate_kernel.o depends on CONFIG_KEXEC.
Whereas, since we will drop the select of KEXEC for CRASH_DUMP in
kernel/Kconfig.kexec, compiling error will be triggered if below config
items are set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
---------------------------------------------------------------
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209':
>> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287':
>> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown'
>> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5':
>> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown'
loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec'
---------------------------------------------------------------
Here, change the dependency of machine_kexec.o relocate_kernel.o to
CONFIG_KEXEC_CORE can fix above building error.
Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The cleanup tasks of kdamond threads including reset of corresponding
DAMON context's ->kdamond field and decrease of global nr_running_ctxs
counter is supposed to be executed by kdamond_fn(). However, commit
0f91d13366a4 ("mm/damon: simplify stop mechanism") made neither
damon_start() nor damon_stop() ensure the corresponding kdamond has
started the execution of kdamond_fn().
As a result, the cleanup can be skipped if damon_stop() is called fast
enough after the previous damon_start(). Especially the skipped reset
of ->kdamond could cause a use-after-free.
Fix it by waiting for start of kdamond_fn() execution from
damon_start().
Link: https://lkml.kernel.org/r/20231208175018.63880-1-sj@kernel.org
Fixes: 0f91d13366a4 ("mm/damon: simplify stop mechanism")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.
But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child
Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After converting selinux to VMA heap check helper, the gcl triggers an
execheap SELinux denial, which is caused by a changed logic check.
Previously selinux only checked that the VMA range was within the VMA heap
range, and the implementation checks the intersection between the two
ranges, but the corner case (vm_end=start_brk, brk=vm_start) isn't handled
correctly.
Since commit 11250fd12eb8 ("mm: factor out VMA stack and heap checks") was
only a function extraction, it seems that the issue was introduced by
commit 0db0c01b53a1 ("procfs: fix /proc/<pid>/maps heap check"). Let's
fix above corner cases, meanwhile, correct the wrong indentation of the
stack and heap check helpers.
Fixes: 11250fd12eb8 ("mm: factor out VMA stack and heap checks")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Closes: https://lore.kernel.org/selinux/CAFqZXNv0SVT0fkOK6neP9AXbj3nxJ61JAY4+zJzvxqJaeuhbFw@mail.gmail.com/
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Link: https://lkml.kernel.org/r/20231207152525.2607420-1-wangkefeng.wang@huawei.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When below config items are set, compiler complained:
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
......
-----------------------
-------------------------------------------------------------------
arch/riscv/kernel/crash_core.c: In function 'arch_crash_save_vmcoreinfo':
arch/riscv/kernel/crash_core.c:11:58: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'int' [-Wformat=]
11 | vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
| ~~^
| |
| long unsigned int
| %x
----------------------------------------------------------------------
This is because on riscv macro VMALLOC_START has different type when
CONFIG_MMU is set or unset.
arch/riscv/include/asm/pgtable.h:
--------------------------------------------------
Changing it to _AC(0, UL) in case CONFIG_MMU=n can fix the warning.
Link: https://lkml.kernel.org/r/ZW7OsX4zQRA3mO4+@MiWiFi-R3L-srv
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for
CRASH_DUMP") we tried to fix a config regression, where CONFIG_CRASH_DUMP
required CONFIG_KEXEC.
However, it was not enough at least for arm64 platforms. While further
testing the patch with our arm64 config I noticed that CONFIG_CRASH_DUMP
is unavailable in menuconfig. This is because CONFIG_CRASH_DUMP still
depends on the new CONFIG_ARCH_SUPPORTS_KEXEC introduced in commit
91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec") and on
arm64 CONFIG_ARCH_SUPPORTS_KEXEC requires CONFIG_PM_SLEEP_SMP=y, which in
turn requires either CONFIG_SUSPEND=y or CONFIG_HIBERNATION=y neither of
which are set in our config.
Given that we already established that CONFIG_KEXEC (which is a switch for
kexec system call itself) is not required for CONFIG_CRASH_DUMP drop
CONFIG_ARCH_SUPPORTS_KEXEC dependency as well. The arm64 kernel builds
just fine with CONFIG_CRASH_DUMP=y and with both CONFIG_KEXEC=n and
CONFIG_KEXEC_FILE=n after f8ff23429c62 ("kernel/Kconfig.kexec: drop select
of KEXEC for CRASH_DUMP") and this patch are applied given that the
necessary shared bits are included via CONFIG_KEXEC_CORE dependency.
[bhe@redhat.com: don't export some symbols when CONFIG_MMU=n]
Link: https://lkml.kernel.org/r/ZW03ODUKGGhP1ZGU@MiWiFi-R3L-srv
[bhe@redhat.com: riscv, kexec: fix dependency of two items]
Link: https://lkml.kernel.org/r/ZW04G/SKnhbE5mnX@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20231129220409.55006-1-ignat@cloudflare.com
Fixes: 91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 6.6+: f8ff234: kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
Cc: <stable@vger.kernel.org> # 6.6+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Lenovo ThinkPad TrackPoint Keyboard II firmware-specific regression
fix (Mikhail Khvainitski)
- device-specific fixes (various authors)
* tag 'hid-for-linus-2023121201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: apple: Add "hfd.cn" and "WKB603" to the list of non-apple keyboards
HID: lenovo: Restrict detection of patched firmware only to USB cptkbd
HID: Add quirk for Labtec/ODDOR/aikeec handbrake
HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]
mailmap: add address mapping for Jiri Kosina
|
|
User may not pass DPLL_A_PIN_STATE attribute in the pin set operation
message. Sanitize that by checking if the attr pointer is not null
and process the passed state attribute value only in that case.
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20231211083758.1082853-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Arinzon says:
====================
ENA driver XDP bug fixes
This patchset contains multiple XDP-related bug fixes
in the ENA driver.
====================
Link: https://lore.kernel.org/r/20231211062801.27891-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending TX packets, the meta descriptor can be all zeroes
as no meta information is required (as in XDP).
This patch removes the validity check, as when
`disable_meta_caching` is enabled, such TX packets will be
dropped otherwise.
Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes two issues:
Issue 1
-------
Description
```````````
Current code does not call dma_sync_single_for_cpu() to sync data from
the device side memory to the CPU side memory before the XDP code path
uses the CPU side data.
This causes the XDP code path to read the unset garbage data in the CPU
side memory, resulting in incorrect handling of the packet by XDP.
Solution
````````
1. Add a call to dma_sync_single_for_cpu() before the XDP code starts to
use the data in the CPU side memory.
2. The XDP code verdict can be XDP_PASS, in which case there is a
fallback to the non-XDP code, which also calls
dma_sync_single_for_cpu().
To avoid calling dma_sync_single_for_cpu() twice:
2.1. Put the dma_sync_single_for_cpu() in the code in such a place where
it happens before XDP and non-XDP code.
2.2. Remove the calls to dma_sync_single_for_cpu() in the non-XDP code
for the first buffer only (rx_copybreak and non-rx_copybreak
cases), since the new call that was added covers these cases.
The call to dma_sync_single_for_cpu() for the second buffer and on
stays because only the first buffer is handled by the newly added
dma_sync_single_for_cpu(). And there is no need for special
handling of the second buffer and on for the XDP path since
currently the driver supports only single buffer packets.
Issue 2
-------
Description
```````````
In case the XDP code forwarded the packet (ENA_XDP_FORWARDED),
ena_unmap_rx_buff_attrs() is called with attrs set to 0.
This means that before unmapping the buffer, the internal function
dma_unmap_page_attrs() will also call dma_sync_single_for_cpu() on
the whole buffer (not only on the data part of it).
This sync is both wasteful (since a sync was already explicitly
called before) and also causes a bug, which will be explained
using the below diagram.
The following diagram shows the flow of events causing the bug.
The order of events is (1)-(4) as shown in the diagram.
CPU side memory area
(3)convert_to_xdp_frame() initializes the
headroom with xdpf metadata
||
\/
___________________________________
| |
0 | V 4K
---------------------------------------------------------------------
| xdpf->data | other xdpf | < data > | tailroom ||...|
| | fields | | GARBAGE || |
---------------------------------------------------------------------
/\ /\
|| ||
(4)ena_unmap_rx_buff_attrs() calls (2)dma_sync_single_for_cpu()
dma_sync_single_for_cpu() on the copies data from device
whole buffer page, overwriting side to CPU side memory
the xdpf->data with GARBAGE. ||
0 4K
---------------------------------------------------------------------
| headroom | < data > | tailroom ||...|
| GARBAGE | | GARBAGE || |
---------------------------------------------------------------------
Device side memory area /\
||
(1) device writes RX packet data
After the call to ena_unmap_rx_buff_attrs() in (4), the xdpf->data
becomes corrupted, and so when it is later accessed in
ena_clean_xdp_irq()->xdp_return_frame(), it causes a page fault,
crashing the kernel.
Solution
````````
Explicitly tell ena_unmap_rx_buff_attrs() not to call
dma_sync_single_for_cpu() by passing it the ENA_DMA_ATTR_SKIP_CPU_SYNC
flag.
Fixes: f7d625adeb7b ("net: ena: Add dynamic recycling mechanism for rx buffers")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
