summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-21net: enetc: remove local "priv" variable in enetc_clean_tx_ring()Vladimir Oltean
The "priv" variable is needed in the "check_writeback" scope since commit d39823121911 ("enetc: add hardware timestamping support"). Since commit 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping"), we also need "priv" in the larger function scope. So the local variable from the "if" block scope is not needed, and actually shadows the other one. Delete it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22Revert "drm/ast: Add detect function support"Kim Phillips
This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux <ainux.wang@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III <chuck.lever@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Jon Grimm <jon.grimm@amd.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
2021-10-22Merge tag 'drm-misc-fixes-2021-10-21-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com
2021-10-22Merge tag 'drm-msm-fixes-2021-10-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com
2021-10-21cfg80211: fix kernel-doc for MBSSID EMAJohannes Berg
The struct member ema_max_profile_periodicity was listed with the wrong name in the kernel-doc, fix that. Link: https://lore.kernel.org/r/20211021173038.18ec2030c66b.Iac731bb299525940948adad2c41f514b7dd81c47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: Prevent AP probing during suspendLoic Poulain
Submitting AP probe/null during suspend can cause unexpected disconnect on resume because of timeout waiting for ack status: wlan0: Failed to send nullfunc to AP 11:22:33:44:55:66 after 500ms, disconnecting This is especially the case when we enter suspend when a scan is ongoing, indeed, scan is cancelled from __ieee80211_suspend, leading to a corresponding (aborted) scan complete event, which in turn causes the submission of an immediate monitor null frame (restart_sta_timer). The corresponding packet or ack will not be processed before resuming, causing a timeout & disconnect on resume. Delay the AP probing when suspending/suspended. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1634805927-1113-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: Add LC placeholder band definition to nl80211_bandSrinivasan Raju
Define LC band which is a draft under IEEE 802.11bb. Current NL80211_BAND_LC is a placeholder band and will be more defined IEEE 802.11bb progresses. Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com> Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: vendor-cmd: intel: add more details for ↵Emmanuel Grumbach
IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP Explain more the expected flow for this command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20211020051147.29297-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: split beacon retrieval functionsAloka Dixit
Split __ieee80211_beacon_get() into a separate function for AP mode ieee80211_beacon_get_ap(). Also, move the code common to all modes (AP, adhoc and mesh) to a separate function ieee80211_beacon_get_finish(). Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20211006040938.9531-2-alokad@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21cfg80211: separate get channel number from iesWen Gong
Get channel number from ies is a common logic, so separate it to a new function, which could also be used by lower driver. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210930081533.4898-1-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: use ieee80211_bss_get_elem() in most placesJohannes Berg
There are a number of uses of ieee80211_bss_get_ie(), replace most of them with ieee80211_bss_get_elem(). Link: https://lore.kernel.org/r/20210930131130.9a413f12a151.I0699ba7e48c9d88dbbfa3107cf4d34a8345d02a0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21cfg80211: scan: use element finding functions in easy casesJohannes Berg
There are a few easy cases where we only check for NULL or have just simple use of the result, this can be done with the element finding functions instead. Link: https://lore.kernel.org/r/20210930131130.f27c8a7ec264.Iadb03c4307e9216e080ce513e8ad4048cd020b25@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: use element finding functionsJohannes Berg
The element finding functions are safer, so use them instead of the "find_ie" functions. Link: https://lore.kernel.org/r/20210930131130.b838f139cc8e.I2b641262d3fc6e0d498719bf343fdc1c0833b845@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: fils: use cfg80211_find_ext_elem()Johannes Berg
Replace the use of cfg80211_find_ext_ie() with the more structured cfg80211_find_ext_elem(). Link: https://lore.kernel.org/r/20210930131130.17ecf37f0605.I853c2f9c2117a713deca9b8deb3552796d98ffac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: fix memory leaks with element parsingJohannes Berg
My previous commit 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems") had a few bugs and leaked the new allocated struct in a few error cases, fix that. Fixes: 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20211001211108.9839928e42e0.Ib81ca187d3d3af7ed1bfeac2e00d08a4637c8025@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21cfg80211: prepare for const netdev->dev_addrJakub Kicinski
netdev->dev_addr will be const soon. All callers of wdev_address() can take const already. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20211019162816.1384077-2-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert mac80211 from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20211019162816.1384077-1-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21wireless: mac80211_hwsim: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20211018235021.1279697-12-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: debugfs: calculate free buffer size correctlyMordechay Goodstein
In breaking patch buf memory moved from stack to heap and sizeof(buf) change from size of actual memory to size of the pointer to the heap. Fix this by holding a separated variable for allocate size. Fixes: 01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20211021163035.b9ae48c06e27.I6a6ed197110eae28cf4f6e38ce36828a7c136337@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21usbnet: sanity check for maxpacketOliver Neukum
maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: make sure all traffic classes can send large framesVladimir Oltean
The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: fix ethtool counter name for PM0_TERRVladimir Oltean
There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21ptp: free 'vclock_index' in ptp_clock_release()Yang Yingliang
'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net/core: Remove unused assignment operations and variableluo penghao
Although if_info_size is assigned, it has not been used. And the variable should also be deleted. The clang_analyzer complains as follows: net/core/rtnetlink.c:3806: warning: Although the value stored to 'if_info_size' is used in the enclosing expression, the value is never actually read from 'if_info_size'. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: stats: Read the statistics in ___gnet_stats_copy_basic() instead of adding.Sebastian Andrzej Siewior
Since the rework, the statistics code always adds up the byte and packet value(s). On 32bit architectures a seqcount_t is used in gnet_stats_basic_sync to ensure that the 64bit values are not modified during the read since two 32bit loads are required. The usage of a seqcount_t requires a lock to ensure that only one writer is active at a time. This lock leads to disabled preemption during the update. The lack of disabling preemption is now creating a warning as reported by Naresh since the query done by gnet_stats_copy_basic() is in preemptible context. For ___gnet_stats_copy_basic() there is no need to disable preemption since the update is performed on stack and can't be modified by another writer. Instead of disabling preemption, to avoid the warning, simply create a read function to just read the values and return as u64. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 67c9e6270f301 ("net: sched: Protect Qdisc::bstats with u64_stats") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge branch 'dsa_to_port-loops'David S. Miller
Vladimir Oltean says: ==================== Remove the "dsa_to_port in a loop" antipattern v1->v2: more patches v2->v3: less patches As opposed to previous series, I would now like to first refactor the DSA core, since that sees fewer patches than drivers, and make the helpers available. Since the refactoring is fairly noisy, I don't want to force it on driver maintainers right away, patches can be submitted independently. The original cover letter is below: The DSA core and drivers currently iterate too much through the port list of a switch. For example, this snippet: for (port = 0; port < ds->num_ports; port++) { if (!dsa_is_cpu_port(ds, port)) continue; ds->ops->change_tag_protocol(ds, port, tag_ops->proto); } iterates through ds->num_ports once, and then calls dsa_is_cpu_port to filter out the other types of ports. But that function has a hidden call to dsa_to_port() in it, which contains: list_for_each_entry(dp, &dst->ports, list) if (dp->ds == ds && dp->index == p) return dp; where the only thing we wanted to know in the first place was whether dp->type == DSA_PORT_TYPE_CPU or not. So it seems that the problem is that we are not iterating with the right variable. We have an "int port" but in fact need a "struct dsa_port *dp". This has started being an issue since this patch series: https://patchwork.ozlabs.org/project/netdev/cover/20191020031941.3805884-1-vivien.didelot@gmail.com/ The currently proposed set of changes iterates like this: dsa_switch_for_each_cpu_port(cpu_dp, ds) err = ds->ops->change_tag_protocol(ds, cpu_dp->index, tag_ops->proto); which iterates directly over ds->dst->ports, which is a list of struct dsa_port *dp. This makes it much easier and more efficient to check dp->type. As a nice side effect, with the proposed driver API, driver writers are now encouraged to use more efficient patterns, and not only due to less iterations through the port list. For example, something like this: for (port = 0; port < ds->num_ports; port++) do_something(); probably does not need to do_something() for the ports that are disabled in the device tree. But adding extra code for that would look like this: for (port = 0; port < ds->num_ports; port++) { if (!dsa_is_unused_port(ds, port)) continue; do_something(); } and therefore, it is understandable that some driver writers may decide to not bother. This patch series introduces a "dsa_switch_for_each_available_port" macro which comes at no extra cost in terms of lines of code / number of braces to the driver writer, but it has the "dsa_is_unused_port" check embedded within it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: dsa: tag_8021q: make dsa_8021q_{rx,tx}_vid take dp as argumentVladimir Oltean
Pass a single argument to dsa_8021q_rx_vid and dsa_8021q_tx_vid that contains the necessary information from the two arguments that are currently provided: the switch and the port number. Also rename those functions so that they have a dsa_port_* prefix, since they operate on a struct dsa_port *. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: dsa: tag_sja1105: do not open-code dsa_switch_for_each_portVladimir Oltean
Find the remaining iterators over dst->ports that only filter for the ports belonging to a certain switch, and replace those with the dsa_switch_for_each_port helper that we have now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: dsa: convert cross-chip notifiers to iterate using dpVladimir Oltean
The majority of cross-chip switch notifiers need to filter in some way over the type of ports: some install VLANs etc on all cascade ports. The difference is that the matching function, which filters by port type, is separate from the function where the iteration happens. So this patch needs to refactor the matching functions' prototypes as well, to take the dp as argument. In a future patch/series, I might convert dsa_towards_port to return a struct dsa_port *dp too, but at the moment it is a bit entangled with dsa_routing_port which is also used by mv88e6xxx and they both return an int port. So keep dsa_towards_port the way it is and convert it into a dp using dsa_to_port. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: dsa: remove gratuitous use of dsa_is_{user,dsa,cpu}_portVladimir Oltean
Find the occurrences of dsa_is_{user,dsa,cpu}_port where a struct dsa_port *dp was already available in the function scope, and replace them with the dsa_port_is_{user,dsa,cpu} equivalent function which uses that dp directly and does not perform another hidden dsa_to_port(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: dsa: do not open-code dsa_switch_for_each_portVladimir Oltean
Find the remaining iterators over dst->ports that only filter for the ports belonging to a certain switch, and replace those with the dsa_switch_for_each_port helper that we have now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: dsa: remove the "dsa_to_port in a loop" antipattern from the coreVladimir Oltean
Ever since Vivien's conversion of the ds->ports array into a dst->ports list, and the introduction of dsa_to_port, iterations through the ports of a switch became quadratic whenever dsa_to_port was needed. dsa_to_port can either be called directly, or indirectly through the dsa_is_{user,cpu,dsa,unused}_port helpers. Use the newly introduced dsa_switch_for_each_port() iteration macro that works with the iterator variable being a struct dsa_port *dp directly, and not an int i. It is an expensive variable to go from i to dp, but cheap to go from dp to i. This macro iterates through the entire ds->dst->ports list and filters by the ports belonging just to the switch provided as argument. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: dsa: introduce helpers for iterating through ports using dpVladimir Oltean
Since the DSA conversion from the ds->ports array into the dst->ports list, the DSA API has encouraged driver writers, as well as the core itself, to write inefficient code. Currently, code that wants to filter by a specific type of port when iterating, like {!unused, user, cpu, dsa}, uses the dsa_is_*_port helper. Under the hood, this uses dsa_to_port which iterates again through dst->ports. But the driver iterates through the port list already, so the complexity is quadratic for the typical case of a single-switch tree. This patch introduces some iteration helpers where the iterator is already a struct dsa_port *dp, so that the other variant of the filtering functions, dsa_port_is_{unused,user,cpu_dsa}, can be used directly on the iterator. This eliminates the second lookup. These functions can be used both by the core and by drivers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21sfc: Don't use netif_info before net_device setupErik Ekman
Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21sfc: Export fibre-specific supported link modesErik Ekman
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter fixes for net: 1) Crash due to missing initialization of timer data in xt_IDLETIMER, from Juhee Kang. 2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum. 3) Skip netdev events on netns removal, from Florian Westphal. 4) Add testcase to show port shadowing via UDP, also from Florian. 5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to unsafe access to non-linear skbuff, from Xin Long. 6) Make net/ipv4/vs/debug_level read-only from non-init netns, from Antoine Tenart. 7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-20 Sudheer Mogilappagari says: This series introduces initial support for Application Device Queues(ADQ) in ice driver. ADQ provides traffic isolation for application flows in hardware and ability to steer traffic to a given traffic class. This helps in aligning NIC queues to application threads. Traffic classes are configured using mqprio framework of tc command and mapped to HW channels(VSIs) in the driver. The queue set of each traffic class is managed by corresponding VSI. Each traffic channel can be configured with bandwidth rate-limiting limits and is offloaded to the hardware through the mqprio framework by specifying the mode option as 'channel' and shaper option as 'bw_rlimit'. Next, the flows of application can be steered into a given traffic class using "tc filter" command. The option "skip_sw hw_tc x" indicates hw-offload of filtering and steering filtered traffic into specified TC. Non-matching traffic flows through TC0. When channel configuration are removed queue configuration is set to default and filters configured on individual traffic classes are deleted. example: $ ethtool -K eth0 hw-tc-offload on Configure 3 traffic classes and map priority 0,1,2 to TC0, TC1 and TC2 respectively. TC0 has 2 queues from offset 0 & TC1 has 8 queues from offset 2 and TC2 has 4 queues from offset 10. Enable hardware offload of channels. $ tc qdisc add dev eth0 root mqprio num_tc 3 map 0 1 2 queues \ 2@0 8@2 4@10 hw 1 mode channel $ tc qdisc show dev eth0 qdisc mqprio 8001: root tc 2 map 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 0 queues:(0:1) (2:9) (10:13) mode:channel Configure two filters to match based on dst ipaddr, dst tcp port and redirect to TC1 and TC2. $ tc qdisc add dev eth0 clsact $ tc filter add dev eth0 protocol ip ingress prio 1 flower\ dst_ip 192.168.1.1/32 ip_proto tcp dst_port 80\ skip_sw hw_tc 1 $ tc filter add dev eth0 protocol ip ingress prio 1 flower\ dst_ip 192.168.1.1/32 ip_proto tcp dst_port 5001\ skip_sw hw_tc 2 $ tc filter show dev eth0 ingress Delete traffic classes configuration: $ sudo tc qdisc del dev eth0 root ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge branch 'mscc-ocelot-all-ports-vlan-untagged-egress'David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: mscc: ocelot: track the port pvid using a pointerVladimir Oltean
Now that we have a list of struct ocelot_bridge_vlan entries, we can rewrite the pvid logic to simply point to one of those structures, instead of having a separate structure with a "bool valid". The NULL pointer will represent the lack of a bridge pvid (not to be confused with the lack of a hardware pvid on the port, that is present at all times). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: mscc: ocelot: add the local station MAC addresses in VID 0Vladimir Oltean
The ocelot switchdev driver does not include the CPU port in the list of flooding destinations for unknown traffic, instead that traffic is supposed to match FDB entries to reach the CPU. The addresses it installs are: (a) the station MAC address, in ocelot_probe_port() and later during runtime in ocelot_port_set_mac_address(). These are the VLAN-unaware addresses. The VLAN-aware addresses are in ocelot_vlan_vid_add(). (b) multicast addresses added with dev_mc_add() (not bridge host MDB entries) in ocelot_mc_sync() (c) multicast destination MAC addresses for MRP in ocelot_mrp_save_mac(), to make sure those are dropped (not forwarded) by the bridging service, just trapped to the CPU So we can see that the logic is slightly buggy ever since the initial commit a556c76adc05 ("net: mscc: Add initial Ocelot switch support"). This is because, when ocelot_probe_port() runs, the port pvid is 0. Then we join a VLAN-aware bridge, the pvid becomes 1, we call ocelot_port_set_mac_address(), this learns the new MAC address in VID 1 (also fails to forget the old one, since it thinks it's in VID 1, but that's not so important). Then when we leave the VLAN-aware bridge, outside world is unable to ping our new MAC address because it isn't learned in VID 0, the VLAN-unaware pvid. [ note: this is strictly based on static analysis, I don't have hardware to test. But there are also many more corner cases ] The basic idea is that we should have a separation of concerns, and the FDB entries used for standalone operation should be managed by the driver, and the FDB entries used by the bridging service should be managed by the bridge. So the standalone and VLAN-unaware bridge FDB entries should not follow the bridge PVID, because that will only be active when the bridge is VLAN-aware. So since the port pvid is coincidentally zero during probe time, just make those entries statically go to VID 0. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: mscc: ocelot: allow a config where all bridge VLANs are egress-untaggedVladimir Oltean
At present, the ocelot driver accepts a single egress-untagged bridge VLAN, meaning that this sequence of operations: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 bridge vlan add dev swp0 vid 2 pvid untagged fails because the bridge automatically installs VID 1 as a pvid & untagged VLAN, and vid 2 would be the second untagged VLAN on this port. It is necessary to delete VID 1 before proceeding to add VID 2. This limitation comes from the fact that we operate the port tag, when it has an egress-untagged VID, in the OCELOT_PORT_TAG_NATIVE mode. The ocelot switches do not have full flexibility and can either have one single VID as egress-untagged, or all of them. There are use cases for having all VLANs as egress-untagged as well, and this patch adds support for that. The change rewrites ocelot_port_set_native_vlan() into a more generic ocelot_port_manage_port_tag() function. Because the software bridge's state, transmitted to us via switchdev, can become very complex, we don't attempt to track all possible state transitions, but instead take a more declarative approach and just make ocelot_port_manage_port_tag() figure out which more to operate in: - port is VLAN-unaware: the classified VLAN (internal, unrelated to the 802.1Q header) is not inserted into packets on egress - port is VLAN-aware: - port has tagged VLANs: -> port has no untagged VLAN: set up as pure trunk -> port has one untagged VLAN: set up as trunk port + native VLAN -> port has more than one untagged VLAN: this is an invalid config which is rejected by ocelot_vlan_prepare - port has no tagged VLANs -> set up as pure egress-untagged port We don't keep the number of tagged and untagged VLANs, we just count the structures we keep. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: mscc: ocelot: convert the VLAN masks to a listVladimir Oltean
First and foremost, the driver currently allocates a constant sized 4K * u32 (16KB memory) array for the VLAN masks. However, a typical application might not need so many VLANs, so if we dynamically allocate the memory as needed, we might actually save some space. Secondly, we'll need to keep more advanced bookkeeping of the VLANs we have, notably we'll have to check how many untagged and how many tagged VLANs we have. This will have to stay in a structure, and allocating another 16 KB array for that is again a bit too much. So refactor the bridge VLANs in a linked list of structures. The hook points inside the driver are ocelot_vlan_member_add() and ocelot_vlan_member_del(), which previously used to operate on the ocelot->vlan_mask[vid] array element. ocelot_vlan_member_add() and ocelot_vlan_member_del() used to call ocelot_vlan_member_set() to commit to the ocelot->vlan_mask. Additionally, we had two calls to ocelot_vlan_member_set() from outside those callers, and those were directly from ocelot_vlan_init(). Those calls do not set up bridging service VLANs, instead they: - clear the VLAN table on reset - set the port pvid to the value used by this driver for VLAN-unaware standalone port operation (VID 0) So now, when we have a structure which represents actual bridge VLANs, VID 0 doesn't belong in that structure, since it is not part of the bridging layer. So delete the middle man, ocelot_vlan_member_set(), and let ocelot_vlan_init() call directly ocelot_vlant_set_mask() which forgoes any data structure and writes directly to hardware, which is all that we need. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21net: mscc: ocelot: add a type definition for REW_TAG_CFG_TAG_CFGVladimir Oltean
This is a cosmetic patch which clarifies what are the port tagging options for Ocelot switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge tag 'mlx5-fixes-2021-10-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2021-10-20 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-20 This series contains updates to e1000e, igc, and ice drivers. Sasha fixes an issue with dropped packets on Tiger Lake platforms for e1000e and corrects a device ID for igc. Tony adds missing E810 device IDs for ice. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21drm/kmb: Enable ADV bridge after modesetAnitha Chrisanthus
On KMB, ADV bridge must be programmed and powered on prior to MIPI DSI HW initialization. v2: changed to atomic_bridge_chain_enable (Sam) Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/kmb: Corrected typo in handle_lcd_irqAnitha Chrisanthus
Check for Overflow bits for layer3 in the irq handler. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/kmb: Disable change of plane parametersEdmund Dea
Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration. v2: removed memset disp_cfg as it is already zero. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/kmb: Remove clearing DPHY regsEdmund Dea
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during DSI initialization since this was causing MIPI Rx reset. Rest of the writes are bitwise, so will not affect Mipi Rx side. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/kmb: Limit supported mode to 1080pAnitha Chrisanthus
KMB only supports single resolution(1080p), this commit checks for 1920x1080x60 or 1920x1080x59 in crtc_mode_valid. Also, modes with vfp < 4 are not supported in KMB display. This change prunes display modes with vfp < 4. v2: added vfp check Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-07 07:59:22 +0000