summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-03ovl: fix NULL pointer defer when encoding non-decodable lower fidAmir Goldstein
A wrong return value from ovl_check_encode_origin() would cause ovl_dentry_to_fid() to try to encode fid from NULL upper dentry. Reported-by: syzbot+2208f82282740c1c8915@syzkaller.appspotmail.com Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02Merge tag 'ubifs-for-linus-6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI fix from Richard Weinberger: - Don't try to attach MTDs with erase block size 0 * tag 'ubifs-for-linus-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Refuse attaching if mtd's erasesize is 0
2023-10-02Merge tag 'libnvdimm-fixes-6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dave Jiang: - Fix incorrect calculation of idt size in NFIT * tag 'libnvdimm-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ACPI: NFIT: Fix incorrect calculation of idt size
2023-10-02Merge tag 'iommu-fixes-v6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Arm SMMU fixes from Will Deacon: - Fix TLB range command encoding when TTL, Num and Scale are all zero - Fix soft lockup by limiting TLB invalidation ops issued by SVA - Fix clocks description for SDM630 platform in arm-smmu DT binding - Intel VT-d fix from Lu Baolu: - Fix a suspend/hibernation problem in iommu_suspend() - Mediatek driver: Fix page table sharing for addresses over 4GiB - Apple/Dart: DMA_FQ handling fix in attach_dev() * tag 'iommu-fixes-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Avoid memory allocation in iommu_suspend() iommu/apple-dart: Handle DMA_FQ domains in attach_dev() iommu/mediatek: Fix share pgtable for iova over 4GB iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range dt-bindings: arm-smmu: Fix SDM630 clocks description iommu/arm-smmu-v3: Avoid constructing invalid range commands
2023-10-02of: overlay: Reorder struct fragment fields kerneldocGeert Uytterhoeven
The fields of the fragment structure were reordered, but the kerneldoc was not updated. Fixes: 81225ea682f45629 ("of: overlay: reorder fields in struct fragment") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/cfa36d2bb95e3c399c415dbf58057302c70ef375.1695893695.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2023-10-02dt-bindings: display: fsl,imx6-hdmi: Change to 'unevaluatedProperties: false'Fabio Estevam
fsl,imx6-hdmi.yaml makes a reference to synopsys,dw-hdmi.yaml. The 'interrupts' and 'reg' properties are described in synopsys,dw-hdmi.yaml, so use 'unevaluatedProperties: false' so that these two properties can be accepted. This fixes the following schema warnings: hdmi@120000: 'interrupts', 'reg' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230930130102.798822-1-festevam@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-10-02ovl: make use of ->layers safe in rcu pathwalkAmir Goldstein
ovl_permission() accesses ->layers[...].mnt; we can't have ->layers freed without an RCU delay on fs shutdown. Fortunately, kern_unmount_array() that is used to drop those mounts does include an RCU delay, so freeing is delayed; unfortunately, the array passed to kern_unmount_array() is formed by mangling ->layers contents and that happens without any delays. The ->layers[...].name string entries are used to store the strings to display in "lowerdir=..." by ovl_show_options(). Those entries are not accessed in RCU walk. Move the name strings into a separate array ofs->config.lowerdirs and reuse the ofs->config.lowerdirs array as the temporary mount array to pass to kern_unmount_array(). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20231002023711.GP3389589@ZenIV/ Acked-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02ovl: fetch inode once in ovl_dentry_revalidate_common()Al Viro
d_inode_rcu() is right - we might be in rcu pathwalk; however, OVL_E() hides plain d_inode() on the same dentry... Fixes: a6ff2bc0be17 ("ovl: use OVL_E() and OVL_E_FLAGS() accessors") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02ovl: move freeing ovl_entry past rcu delayAl Viro
... into ->free_inode(), that is. Fixes: 0af950f57fef "ovl: move ovl_entry into ovl_inode" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02x86/sev: Change npages to unsigned long in snp_accept_memory()Tom Lendacky
In snp_accept_memory(), the npages variables value is calculated from phys_addr_t variables but is an unsigned int. A very large range passed into snp_accept_memory() could lead to truncating npages to zero. This doesn't happen at the moment but let's be prepared. Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/6d511c25576494f682063c9fb6c705b526a3757e.1687441505.git.thomas.lendacky@amd.com
2023-10-02x86/sev: Use the GHCB protocol when available for SNP CPUID requestsTom Lendacky
SNP retrieves the majority of CPUID information from the SNP CPUID page. But there are times when that information needs to be supplemented by the hypervisor, for example, obtaining the initial APIC ID of the vCPU from leaf 1. The current implementation uses the MSR protocol to retrieve the data from the hypervisor, even when a GHCB exists. The problem arises when an NMI arrives on return from the VMGEXIT. The NMI will be immediately serviced and may generate a #VC requiring communication with the hypervisor. Since a GHCB exists in this case, it will be used. As part of using the GHCB, the #VC handler will write the GHCB physical address into the GHCB MSR and the #VC will be handled. When the NMI completes, processing resumes at the site of the VMGEXIT which is expecting to read the GHCB MSR and find a CPUID MSR protocol response. Since the NMI handling overwrote the GHCB MSR response, the guest will see an invalid reply from the hypervisor and self-terminate. Fix this problem by using the GHCB when it is available. Any NMI received is properly handled because the GHCB contents are copied into a backup page and restored on NMI exit, thus preserving the active GHCB request or result. [ bp: Touchups. ] Fixes: ee0bfa08a345 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
2023-10-02RDMA/mlx5: Remove not-used cache disable flagLeon Romanovsky
During execution of mlx5_mkey_cache_cleanup(), there is a guarantee that MR are not registered and/or destroyed. It means that we don't need newly introduced cache disable flag. Fixes: 374012b00457 ("RDMA/mlx5: Fix mkey cache possible deadlock on cleanup") Link: https://lore.kernel.org/r/c7e9c9f98c8ae4a7413d97d9349b29f5b0a23dbe.1695921626.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-10-02RDMA/cma: Initialize ib_sa_multicast structure to 0 when joinMark Zhang
Initialize the structure to 0 so that it's fields won't have random values. For example fields like rec.traffic_class (as well as rec.flow_label and rec.sl) is used to generate the user AH through: cma_iboe_join_multicast cma_make_mc_event ib_init_ah_from_mcmember And a random traffic_class causes a random IP DSCP in RoCEv2. Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/20230927090511.603595-1-markzhang@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-10-02ovl: fix file reference leak when submitting aioAmir Goldstein
Commit 724768a39374 ("ovl: fix incorrect fdput() on aio completion") took a refcount on real file before submitting aio, but forgot to avoid clearing FDPUT_FPUT from real.flags stack variable. This can result in a file reference leak. Fixes: 724768a39374 ("ovl: fix incorrect fdput() on aio completion") Reported-by: Gil Lev <contact@levgil.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02staging: media: tegra-video: fix infinite recursion regressionLuca Ceresoli
Since commit 9bf19fbf0c8b ("media: v4l: async: Rework internal lists"), aka v6.6-rc1~97^2~198, probing the tegra-video VI driver causes infinite recursion due tegra_vi_graph_parse_one() calling itself until: [ 1.571168] Insufficient stack space to handle exception! ... [ 1.591416] Internal error: kernel stack overflow: 0 [#1] PREEMPT SMP ARM ... [ 3.861013] of_phandle_iterator_init from __of_parse_phandle_with_args+0x40/0xf0 [ 3.868497] __of_parse_phandle_with_args from of_fwnode_graph_get_remote_endpoint+0x68/0xa8 [ 3.876938] of_fwnode_graph_get_remote_endpoint from fwnode_graph_get_remote_port_parent+0x30/0x7c [ 3.885984] fwnode_graph_get_remote_port_parent from tegra_vi_graph_parse_one+0x7c/0x224 [ 3.894158] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224 [ 3.901459] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224 [ 3.908760] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224 [ 3.916061] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224 ... [ 4.857892] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224 [ 4.865193] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224 [ 4.872494] tegra_vi_graph_parse_one from tegra_vi_init+0x574/0x6d4 [ 4.878842] tegra_vi_init from host1x_device_init+0x84/0x15c [ 4.884594] host1x_device_init from host1x_video_probe+0xa0/0x114 [ 4.890770] host1x_video_probe from really_probe+0xe0/0x400 The reason is the mentioned commit changed tegra_vi_graph_find_entity() to search for an entity in the done notifier list: > @@ -1464,7 +1464,7 @@ tegra_vi_graph_find_entity(struct tegra_vi_channel *chan, > struct tegra_vi_graph_entity *entity; > struct v4l2_async_connection *asd; > > - list_for_each_entry(asd, &chan->notifier.asc_list, asc_entry) { > + list_for_each_entry(asd, &chan->notifier.done_list, asc_entry) { > entity = to_tegra_vi_graph_entity(asd); > if (entity->asd.match.fwnode == fwnode) > return entity; This is not always correct, being tegra_vi_graph_find_entity() called in three locations, in this order: 1. tegra_vi_graph_parse_one() -- called while probing 2. tegra_vi_graph_notify_bound() -- the .bound notifier op 3. tegra_vi_graph_build() -- called in the .complete notifier op Locations 1 and 2 are called before moving the entity from waiting_list to done_list, thus they won't find what they are looking for in done_list. Location 3 happens afterwards and thus it is not broken, however it means tegra_vi_graph_find_entity() should not search in the same list every time. The error appears at step 1: tegra_vi_graph_parse_one() iterates recursively until it finds the entity already notified, which now never happens. Fix by passing the specific notifier list pointer to tegra_vi_graph_find_entity() instead of the channel, so each caller can search in whatever list is correct. Also improve the tegra_vi_graph_find_entity() comment. Fixes: 9bf19fbf0c8b ("media: v4l: async: Rework internal lists") Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> [Sakari Ailus: Wrapped some long lines.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-02media: pci: intel: ivsc: select V4L2_FWNODEArnd Bergmann
Some missing select statements were already added back, but I ran into another one that is missing: ERROR: modpost: "v4l2_fwnode_endpoint_free" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined! ERROR: modpost: "v4l2_fwnode_endpoint_alloc_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined! ERROR: modpost: "v4l2_fwnode_endpoint_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined! Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Sakari Ailus: Drop V4L2_ASYNC dependency, it is implied now.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-02media: ipu-bridge: Fix Kconfig dependenciesSakari Ailus
The current Kconfig symbol dependencies allow having the following Kconfig symbol values CONFIG_IPU_BRIDGE=m CONFIG_VIDEO_IPU3_CIO2=y CONFIG_CIO2_BRIDGE=n This does not work as the IPU bridge API is conditional to IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so that CONFIG_IPU_BRIDGE can be separately selected. The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is removed. Fixes: 2545a2c02ba1 ("media: ipu3-cio2: allow ipu_bridge to be a module again") Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-02media: pxa_camera: Fix an error handling path in pxa_camera_probe()Christophe JAILLET
The commit in Fixes has reordered the code and the error handling path. However one 'goto' was missed. Fix it and branch at the correct place in the error handling path. Fixes: 5073d10cbaba ("media: pxa_camera: Register V4L2 device early") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-02gpio: pxa: disable pinctrl calls for MMP_GPIODuje Mihanović
Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting pin direction on MMP either. Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-10-02sky2: Make sure there is at least one frag_addr availableKees Cook
In the pathological case of building sky2 with 16k PAGE_SIZE, the frag_addr[] array would never be used, so the original code was correct that size should be 0. But the compiler now gets upset with 0 size arrays in places where it hasn't eliminated the code that might access such an array (it can't figure out that in this case an rx skb with fragments would never be created). To keep the compiler happy, make sure there is at least 1 frag_addr in struct rx_ring_info: In file included from include/linux/skbuff.h:28, from include/net/net_namespace.h:43, from include/linux/netdevice.h:38, from drivers/net/ethernet/marvell/sky2.c:18: drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb': include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=] 416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page' 1257 | dma_unmap_page(&pdev->dev, re->frag_addr[i], | ^~~~~~~~~~~~~~ In file included from drivers/net/ethernet/marvell/sky2.c:41: drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr' 2198 | dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT]; | ^~~~~~~~~ With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so: #define ETH_JUMBO_MTU 9000 causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning. Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309191958.UBw1cjXk-lkp@intel.com/ Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-02net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absentFabio Estevam
Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") the following error is seen on a imx8mn board with a 88E6320 switch: mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done This board does not have an EEPROM attached to the switch though. This problem is well explained by Andrew Lunn: "If there is an EEPROM, and the EEPROM contains a lot of data, it could be that when we perform a hardware reset towards the end of probe, it interrupts an I2C bus transaction, leaving the I2C bus in a bad state, and future reads of the EEPROM do not work. The work around for this was to poll the EEInt status and wait for it to go true before performing the hardware reset. However, we have discovered that for some boards which do not have an EEPROM, EEInt never indicates complete. As a result, mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a warning. We probably need a different solution than calling mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the EEPROM Command register: bit 15 is: EEPROM Unit Busy. This bit must be set to a one to start an EEPROM operation (see EEOp below). Only one EEPROM operation can be executing at one time so this bit must be zero before setting it to a one. When the requested EEPROM operation completes this bit will automatically be cleared to a zero. The transition of this bit from a one to a zero can be used to generate an interrupt (the EEInt in Global 1, offset 0x00). and more interesting is bit 11: Register Loader Running. This bit is set to one whenever the register loader is busy executing instructions contained in the EEPROM." Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error when the EEPROM chip is not present. Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-02ptp: ocp: Fix error handling in ptp_ocp_device_initDinghao Liu
When device_add() fails, ptp_ocp_dev_release() will be called after put_device(). Therefore, it seems that the ptp_ocp_dev_release() before put_device() is redundant. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Vadim Feodrenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01Linux 6.6-rc4v6.6-rc4Linus Torvalds
2023-10-01Merge tag 'kbuild-fixes-v6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the module compression with xz so the in-kernel decompressor works - Document a kconfig idiom to express an optional dependency between modules - Make modpost, when W=1 is given, detect broken drivers that reference .exit.* sections - Remove unused code * tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove stale code for 'source' symlink in packaging scripts modpost: Don't let "driver"s reference .exit.* vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros modpost: add missing else to the "of" check Documentation: kbuild: explain handling optional dependencies kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
2023-10-01Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
2023-10-01Merge tag 'char-misc-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single, much requested, fix for a set of misc drivers to resolve a much reported regression in the -rc series that has also propagated back to the stable releases. Sorry for the delay, lots of conference travel for a few weeks put me very far behind in patch wrangling. It has been reported by many to resolve the reported problem, and has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
2023-10-01Merge tag 'tty-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver fixes from Greg KH: "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some reported regressions: - revert a n_gsm change that ended up causing problems - 8250_port fix for irq data both have been in linux-next for over a week with no reported problems" * tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" serial: 8250_port: Check IRQ data before use
2023-10-01net: prevent address rewrite in kernel_bind()Jordan Rife
Similar to the change in commit 0bdf399342c5("net: Avoid address overwrite in kernel_connect"), BPF hooks run on bind may rewrite the address passed to kernel_bind(). This change 1) Makes a copy of the bind address in kernel_bind() to insulate callers. 2) Replaces direct calls to sock->ops->bind() in net with kernel_bind() Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jordan Rife <jrife@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: prevent rewrite of msg_name in sock_sendmsg()Jordan Rife
Callers of sock_sendmsg(), and similarly kernel_sendmsg(), in kernel space may observe their value of msg_name change in cases where BPF sendmsg hooks rewrite the send address. This has been confirmed to break NFS mounts running in UDP mode and has the potential to break other systems. This patch: 1) Creates a new function called __sock_sendmsg() with same logic as the old sock_sendmsg() function. 2) Replaces calls to sock_sendmsg() made by __sys_sendto() and __sys_sendmsg() with __sock_sendmsg() to avoid an unnecessary copy, as these system calls are already protected. 3) Modifies sock_sendmsg() so that it makes a copy of msg_name if present before passing it down the stack to insulate callers from changes to the send address. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jordan Rife <jrife@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: replace calls to sock->ops->connect() with kernel_connect()Jordan Rife
commit 0bdf399342c5 ("net: Avoid address overwrite in kernel_connect") ensured that kernel_connect() will not overwrite the address parameter in cases where BPF connect hooks perform an address rewrite. This change replaces direct calls to sock->ops->connect() in net with kernel_connect() to make these call safe. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jordan Rife <jrife@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()David Howells
Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself. Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Reported-by: syzbot+62cbf263225ae13ff153@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/0000000000001c12b30605378ce8@google.com/ Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric Dumazet <edumazet@google.com> cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> cc: "David S. Miller" <davem@davemloft.net> cc: David Ahern <dsahern@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: Jakub Kicinski <kuba@kernel.org> cc: netdev@vger.kernel.org cc: bpf@vger.kernel.org cc: syzkaller-bugs@googlegroups.com Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01Merge tag 'x86-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for AMD-derived Hygon processors, and fix a SGX kernel crash in the page fault handler that can trigger when ksgxd races to reclaim the SECS special page, by making the SECS page unswappable" * tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race x86/srso: Add SRSO mitigation for Hygon processors x86/kgdb: Fix a kerneldoc warning when build with W=1
2023-10-01Merge tag 'timers-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe
2023-10-01Merge tag 'sched-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a RT tasks related lockup/live-lock during CPU offlining" * tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix live lock between select_fallback_rq() and RT push
2023-10-01Merge tag 'perf-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fixes from Ingo Molnar: "Misc fixes: work around an AMD microcode bug on certain models, and fix kexec kernel PMI handlers on AMD systems that get loaded on older kernels that have an unexpected register state" * tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Do not WARN() on every IRQ perf/x86/amd/core: Fix overflow reset on hotplug
2023-10-01neighbour: fix data-races around n->outputEric Dumazet
n->output field can be read locklessly, while a writer might change the pointer concurrently. Add missing annotations to prevent load-store tearing. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: fix possible store tearing in neigh_periodic_work()Eric Dumazet
While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev(). Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01kbuild: remove stale code for 'source' symlink in packaging scriptsMasahiro Yamada
Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"), modules_install does not create the 'source' symlink. Remove the stale code from builddeb and kernel.spec. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-10-01Merge tag 'for-net-2023-09-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth bluetooth pull request for net: - Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - Fix handling of listen for ISO unicast - Fix build warnings - Fix leaking content of local_codecs - Add shutdown function for QCA6174 - Delete unused hci_req_prepare_suspend() declaration - Fix hci_link_tx_to RCU lock usage - Avoid redundant authentication Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01net: stmmac: platform: fix the incorrect parameterClark Wang
The second parameter of stmmac_pltfr_init() needs the pointer of "struct plat_stmmacenet_data". So, correct the parameter typo when calling the function. Otherwise, it may cause this alignment exception when doing suspend/resume. [ 49.067201] CPU1 is up [ 49.135258] Internal error: SP/PC alignment exception: 000000008a000000 [#1] PREEMPT SMP [ 49.143346] Modules linked in: soc_imx9 crct10dif_ce polyval_ce nvmem_imx_ocotp_fsb_s400 polyval_generic layerscape_edac_mod snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_imx_card snd_soc_wm8962 el_enclave snd_soc_fsl_micfil rtc_pcf2127 rtc_pcf2131 flexcan can_dev snd_soc_fsl_xcvr snd_soc_fsl_sai imx8_media_dev(C) snd_soc_fsl_utils fuse [ 49.173393] CPU: 0 PID: 565 Comm: sh Tainted: G C 6.5.0-rc4-next-20230804-05047-g5781a6249dae #677 [ 49.183721] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 49.189190] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 49.196140] pc : 0x80800052 [ 49.198931] lr : stmmac_pltfr_resume+0x34/0x50 [ 49.203368] sp : ffff800082f8bab0 [ 49.206670] x29: ffff800082f8bab0 x28: ffff0000047d0ec0 x27: ffff80008186c170 [ 49.213794] x26: 0000000b5e4ff1ba x25: ffff800081e5fa74 x24: 0000000000000010 [ 49.220918] x23: ffff800081fe0000 x22: 0000000000000000 x21: 0000000000000000 [ 49.228042] x20: ffff0000001b4010 x19: ffff0000001b4010 x18: 0000000000000006 [ 49.235166] x17: ffff7ffffe007000 x16: ffff800080000000 x15: 0000000000000000 [ 49.242290] x14: 00000000000000fc x13: 0000000000000000 x12: 0000000000000000 [ 49.249414] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff800082f8b8c0 [ 49.256538] x8 : 0000000000000008 x7 : 0000000000000001 x6 : 000000005f54a200 [ 49.263662] x5 : 0000000001000000 x4 : ffff800081b93680 x3 : ffff800081519be0 [ 49.270786] x2 : 0000000080800052 x1 : 0000000000000000 x0 : ffff0000001b4000 [ 49.277911] Call trace: [ 49.280346] 0x80800052 [ 49.282781] platform_pm_resume+0x2c/0x68 [ 49.286785] dpm_run_callback.constprop.0+0x74/0x134 [ 49.291742] device_resume+0x88/0x194 [ 49.295391] dpm_resume+0x10c/0x230 [ 49.298866] dpm_resume_end+0x18/0x30 [ 49.302515] suspend_devices_and_enter+0x2b8/0x624 [ 49.307299] pm_suspend+0x1fc/0x348 [ 49.310774] state_store+0x80/0x104 [ 49.314258] kobj_attr_store+0x18/0x2c [ 49.318002] sysfs_kf_write+0x44/0x54 [ 49.321659] kernfs_fop_write_iter+0x120/0x1ec [ 49.326088] vfs_write+0x1bc/0x300 [ 49.329485] ksys_write+0x70/0x104 [ 49.332874] __arm64_sys_write+0x1c/0x28 [ 49.336783] invoke_syscall+0x48/0x114 [ 49.340527] el0_svc_common.constprop.0+0xc4/0xe4 [ 49.345224] do_el0_svc+0x38/0x98 [ 49.348526] el0_svc+0x2c/0x84 [ 49.351568] el0t_64_sync_handler+0x100/0x12c [ 49.355910] el0t_64_sync+0x190/0x194 [ 49.359567] Code: ???????? ???????? ???????? ???????? (????????) [ 49.365644] ---[ end trace 0000000000000000 ]--- Fixes: 97117eb51ec8 ("net: stmmac: platform: provide stmmac_pltfr_init()") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01modpost: Don't let "driver"s reference .exit.*Uwe Kleine-König
Drivers must not reference functions marked with __exit as these likely are not available when the code is built-in. There are few creative offenders uncovered for example in ARCH=amd64 allmodconfig builds. So only trigger the section mismatch warning for W=1 builds. The dual rule that drivers must not reference .init.* is implemented since commit 0db252452378 ("modpost: don't allow *driver to reference .init.*") which however missed that .exit.* should be handled in the same way. Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to find this improvement. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-10-01vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macrosMasahiro Yamada
Remove the left-over of commit e24f6628811e ("modpost: remove all traces of cpuinit/cpuexit sections"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2023-10-01modpost: add missing else to the "of" checkMauricio Faria de Oliveira
Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-30Merge tag 'soc-fixes-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the latest bug fixes that have come up in the soc tree. Most of these are fairly minor. Most notably, the majority of changes this time are not for dts files as usual. - Updates to the addresses of the broadcom and aspeed entries in the MAINTAINERS file. - Defconfig updates to address a regression on samsung and a build warning from an unknown Kconfig symbol - Build fixes for the StrongARM and Uniphier platforms - Code fixes for SCMI and FF-A firmware drivers, both of which had a simple bug that resulted in invalid data, and a lesser fix for the optee firmware driver - Multiple fixes for the recently added loongson/loongarch "guts" soc driver - Devicetree fixes for RISC-V on the startfive platform, addressing issues with NOR flash, usb and uart. - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with clock, gpio, hdmi settings and the Makefile - Bug fixes for i.MX firmware code and the OCOTP soc driver - Multiple fixes for the TI sysc bus driver - Minor dts updates for TI omap dts files, to address boot time warnings and errors" * tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) MAINTAINERS: Fix Florian Fainelli's email address arm64: defconfig: enable syscon-poweroff driver ARM: locomo: fix locomolcd_power declaration soc: loongson: loongson2_guts: Remove unneeded semicolon soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() soc: loongson: loongson_pm2: Populate children syscon nodes dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child soc: loongson: loongson_pm2: Drop useless of_device_id compatible dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible soc: loongson: loongson_pm2: Add dependency for INPUT arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y ARM: uniphier: fix cache kernel-doc warnings MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks ...
2023-09-30Merge tag 'trace-v6.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Make sure 32-bit applications using user events have aligned access when running on a 64-bit kernel. - Add cond_resched in the loop that handles converting enums in print_fmt string is trace events. - Fix premature wake ups of polling processes in the tracing ring buffer. When a task polls waiting for a percentage of the ring buffer to be filled, the writer still will wake it up at every event. Add the polling's percentage to the "shortest_full" list to tell the writer when to wake it up. - For eventfs dir lookups on dynamic events, an event system's only event could be removed, leaving its dentry with no children. This is totally legitimate. But in eventfs_release() it must not access the children array, as it is only allocated when the dentry has children. * tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Test for dentries array allocated in eventfs_release() tracing/user_events: Align set_bit() address for all archs tracing: relax trace_event_eval_update() execution with cond_resched() ring-buffer: Update "shortest_full" in polling
2023-09-30eventfs: Test for dentries array allocated in eventfs_release()Steven Rostedt (Google)
The dcache_dir_open_wrapper() could be called when a dynamic event is being deleted leaving a dentry with no children. In this case the dlist->dentries array will never be allocated. This needs to be checked for in eventfs_release(), otherwise it will trigger a NULL pointer dereference. Link: https://lore.kernel.org/linux-trace-kernel/20230930090106.1c3164e9@rorschach.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: ef36b4f92868 ("eventfs: Remember what dentries were created on dir open") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30tracing/user_events: Align set_bit() address for all archsBeau Belgrave
All architectures should use a long aligned address passed to set_bit(). User processes can pass either a 32-bit or 64-bit sized value to be updated when tracing is enabled when on a 64-bit kernel. Both cases are ensured to be naturally aligned, however, that is not enough. The address must be long aligned without affecting checks on the value within the user process which require different adjustments for the bit for little and big endian CPUs. Add a compat flag to user_event_enabler that indicates when a 32-bit value is being used on a 64-bit kernel. Long align addresses and correct the bit to be used by set_bit() to account for this alignment. Ensure compat flags are copied during forks and used during deletion clears. Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/ Cc: stable@vger.kernel.org Fixes: 7235759084a4 ("tracing/user_events: Use remote writes for event enablement") Reported-by: Clément Léger <cleger@rivosinc.com> Suggested-by: Clément Léger <cleger@rivosinc.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30tracing: relax trace_event_eval_update() execution with cond_resched()Clément Léger
When kernel is compiled without preemption, the eval_map_work_func() (which calls trace_event_eval_update()) will not be preempted up to its complete execution. This can actually cause a problem since if another CPU call stop_machine(), the call will have to wait for the eval_map_work_func() function to finish executing in the workqueue before being able to be scheduled. This problem was observe on a SMP system at boot time, when the CPU calling the initcalls executed clocksource_done_booting() which in the end calls stop_machine(). We observed a 1 second delay because one CPU was executing eval_map_work_func() and was not preempted by the stop_machine() task. Adding a call to cond_resched() in trace_event_eval_update() allows other tasks to be executed and thus continue working asynchronously like before without blocking any pending task at boot time. Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Clément Léger <cleger@rivosinc.com> Tested-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30ring-buffer: Update "shortest_full" in pollingSteven Rostedt (Google)
It was discovered that the ring buffer polling was incorrectly stating that read would not block, but that's because polling did not take into account that reads will block if the "buffer-percent" was set. Instead, the ring buffer polling would say reads would not block if there was any data in the ring buffer. This was incorrect behavior from a user space point of view. This was fixed by commit 42fb0a1e84ff by having the polling code check if the ring buffer had more data than what the user specified "buffer percent" had. The problem now is that the polling code did not register itself to the writer that it wanted to wait for a specific "full" value of the ring buffer. The result was that the writer would wake the polling waiter whenever there was a new event. The polling waiter would then wake up, see that there's not enough data in the ring buffer to notify user space and then go back to sleep. The next event would wake it up again. Before the polling fix was added, the code would wake up around 100 times for a hackbench 30 benchmark. After the "fix", due to the constant waking of the writer, it would wake up over 11,0000 times! It would never leave the kernel, so the user space behavior was still "correct", but this definitely is not the desired effect. To fix this, have the polling code add what it's waiting for to the "shortest_full" variable, to tell the writer not to wake it up if the buffer is not as full as it expects to be. Note, after this fix, it appears that the waiter is now woken up around 2x the times it was before (~200). This is a tremendous improvement from the 11,000 times, but I will need to spend some time to see why polling is more aggressive in its wakeups than the read blocking code. Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30Merge tag 'dma-mapping-6.6-2023-09-30' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-31 10:54:35 +0000