summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-28mlxsw: spectrum: Dump LAG FDB records only onceIdo Schimmel
LAG FDB records can only point to LAG devices or VLAN devices configured on top of them. Therefore, when dumping the FDB we shouldn't associate these records with the underlying physical ports. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Use correct netdev when notifying bridgeIdo Schimmel
LAG FDB entries pointing to VLAN devices should be reported to the bridge with the matching VLAN device and not the underlying LAG device. Fixes: aac78a440887 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't report VLAN for 802.1D FDB entriesIdo Schimmel
When dumping the hardware FDB we should report entries pointing to VLAN devices with VLAN 0, as packets coming into the bridge are untagged. Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these devices. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Notify bridge's FDB only based on learning_syncIdo Schimmel
When we disable learning on bridge port we should still update the software bridge's FDB when entry pointing to this bridge port is aged-out. We can otherwise have an inconsistency between software and hardware tables. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Disable learning according to STP stateIdo Schimmel
When port is put into LISTENING state it shouldn't populate the FDB, so set the port's STP state in hardware to DISCARDING instead of LEARNING. It will therefore keep listening to BPDU packets, but discard other non-control packets and won't perform any learning. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't forward packets when STP state is DISABLEDIdo Schimmel
When STP state is set to DISABLED the port is assumed to be inactive, but currently we forward packets ingressing through it. Instead, set the port's STP state in hardware to DISCARDING, which means it doesn't forward packets or perform any learning, but it does trap control packets. However, these packets will be dropped by bridge code, which results in the expected behavior. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Flush FDB when leaving bridgeIdo Schimmel
As explained in previous commit, we should always take care of flushing the FDB in the driver and not rely on bridge code. We need to distinguish between two cases with regards to LAG: 1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of it). In this case don't flush the FDB entries pointing to the LAG ID, as this will affect other ports still member in the LAG. Only flush the FDB when the last port in the LAG is leaving the bridge. 2) LAG device is leaving the bridge. In this case the CHANGEUPPER event is simply propagated to each member port, so make each port flush the FDB in its turn. Note that emptying a bridged LAG from ports creates an inconsistency between hardware and software. A user who later (< ageing_time) re-populates the LAG won't have any FDB entries pointing to the LAG ID in hardware, but they will be present in the software bridge's FDB. Currently there is no good solution to this problem, but this will be addressed by us in the future. In order to optimize the flushing process, flush by port or LAG ID if there are no VLAN interfaces on top of the port. Otherwise, flush using (Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to which the VLAN device is mapped to. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: reg: Add the Switch Filtering DB Flush registerIdo Schimmel
When removing a net device from a bridge we should flush the FDB entries associated with this net device. Up until now, we relied upon bridge code to do that for us, but it is possible for user to prevent hardware from syncing with the software bridge (learning_sync=0), so we need to flush overselves. Add the Switch Filtering DB Flush (SFDF) register that is used to flush FDB entries according to different parameters (per-port, per-FID etc). Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Handle port leaving LAG while bridgedIdo Schimmel
It is possible for a user to remove a port from a LAG device, while the LAG device or VLAN devices on top of it are bridged. In these cases, bridge's teardown sequence is never issued, so we need to take care of it ourselves. When LAG's unlinking event is received by port netdev: 1) Traverse its vPorts list and make those member in a bridge leave it. They will be deleted later by LAG code. 2) Make the port netdev itself leave its bridge if member in one. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27Merge tag 'iwlwifi-for-kalle-2016-01-26_2' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * Fix support for 3168 device + NVM version + firmware file name + device IDs * Fix a compilation warning in dvm calibration code * Fix the TPC (reduced Tx Power) code. This fixes performance issues * Device IDs for 8265
2016-01-26iwlwifi: mvm: rs: fix TPC statistics handlingGregory Greenman
FW behaviour changed and now updates driver about the used TPC reduction in the following cases: 1. In tx response, which is used mostly for a single frame case 2. In BA notification When tx aggregation fails with the initial rate, FW will send to the driver BA notification and will try to transmit with the next rate, but this time without tx power reduction. Thus, in case of a failure with the initial rate, driver will get two BA notifications, the first one with reduced tx power as in the LQ command and the second one with 0 power reduction. This patch adapts the TPC statistics according to the description above: 1. Use BA notifications instead of Tx response 2. For TPC only, drop the optimization which considers empty BA as one MPDU. The reason is that with TPC we want to recover very quickly from a bad power reduction and, therefore we'd like the success ratio to get an immediate hit when failing to get a BA, so we'd switch back to a lower or zero power reduction Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-26iwlwifi: update support for 3168 series firmware and NVMOren Givon
Update the struct which defines the support for 3168 cards. Now it will search for a firmware of this format: iwlwifi-3168-XX.ucode Also, set the minimum version of the ucode to 20. Update the minimum NVM version and minimum NVM calibrations version of the 3168 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-26Merge ath-current from ath.gitKalle Valo
2016-01-26rfkill: fix rfkill_fop_read wait_event usageJohannes Berg
The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Cc: stable@vger.kernel.org Fixes: c64fb01627e24 ("rfkill: create useful userspace interface") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-26mac80211: Requeue work after scan complete for all VIF types.Sachin Kulkarni
During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Cc: stable@vger.kernel.org Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-01-25 This series contains updates to i40e only and so I won't continue receiving patches to fix the same issue (again). Arnd fixes the driver from causing the compiler whining about uninitialized variables, so initialize those variables. Eric fixes the build errors/warnings which were introduced by Anjali when she added geneve support to i40e. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: i40e: shut up uninitialized variable warningsArnd Bergmann
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring': intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared here intel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-25i40e: fix build warningsEric Dumazet
Fixes following build warnings : drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning: 'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning: 'i40e_add_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning: 'i40e_del_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning: 'i40e_add_geneve_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning: 'i40e_del_geneve_port' defined but not used [-Wunused-function] Fixes: 6a899024058d ("i40e: geneve tunnel offload support") Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-25hv_netvsc: Fix book keeping of skb during batching processHaiyang Zhang
Since eliminating send_completion_tid from struct hv_netvsc_packet, we haven't add proper book keeping for the skb of the batched packet. This patch fixes this issue and allows the previous skb is properly freed. Otherwise, a panic may happen. Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25hv_netvsc: use skb_get_hash() instead of a homegrown implementationVitaly Kuznetsov
Recent changes to 'struct flow_keys' (e.g commit d34af823ff40 ("net: Add VLAN ID to flow_keys")) introduced a performance regression in netvsc driver. Is problem is, however, not the above mentioned commit but the fact that netvsc_set_hash() function did some assumptions on the struct flow_keys data layout and this is wrong. Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change will also imply switching to Jenkins hash from the currently used Toeplitz but it seems there is no good excuse for Toeplitz to stay. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25sit: set rtnl_link_ops before calling register_netdeviceThadeu Lima de Souza Cascardo
When creating a SIT tunnel with ip tunnel, rtnl_link_ops is not set before ipip6_tunnel_create is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: fec: use CONFIG_ARM instead of CONFIG_ARCH_MXC/SOC_IMX28Johannes Berg
As Arnd Bergmann points out, using CONFIG_ARCH_MXC and/or SOC_IMX28 is wrong if some other ARM platform uses this device - the operation of the driver would depend on an unrelated ARM platform that might or might not be set for multi-platform kernels. Prior to my previous patch, any other platforms using it would have been broken already due to having the cbd_datlen/cbd_sc fields in the wrong order, but byte ordering correctly, so no such platforms can exist and work today. In any case, it seems likely that only Freescale SoCs use this part, and those are little-endian on ARM, so CONFIG_ARM is safe for them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25defxx: fix build warningSudip Mukherjee
We are getting many build warnings about: 'bar_start' may be used uninitialized and 'bar_len' may be used uninitialized They are not actually uninitialized as dfx_get_bars() will initialize them properly. But still lets have them initialized just to satisfy the compiler (gcc 4.8.2). Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: macb: fix build warningSudip Mukherjee
We are getting build warning about: macb.c:2889:13: warning: 'tx_clk' may be used uninitialized in this function macb.c:2888:11: warning: 'hclk' may be used uninitialized in this function In reality they are not used uninitialized as clk_init() will initialize them, this patch will just silence the warning. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: fec: make driver endian-safeJohannes Berg
The driver treats the device descriptors as CPU-endian, which appears to be correct with the default endianness on both ARM (typically LE) and PowerPC (typically BE) SoCs, indicating that the hardware block is generated differently. Add endianness annotations and byteswaps as necessary. It's not clear that the ifdef there really is correct and shouldn't just be #ifdef CONFIG_ARM, but I also can't test on anything but the i.MX6 HummingBoard where this gets it working with a BE kernel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: dsa: fix mv88e6xxx switchesRussell King
Since commit 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops"), the Marvell 88E6xxx switch has been unable to pass traffic between ports - any received traffic is discarded by the switch. Taking a port out of bridge mode and configuring a vlan on it also the port to start passing traffic. With the debugfs files re-instated to allow debug of this issue by comparing the register settings between the working and non-working case, the reason becomes clear: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 - 7: 1111 707f 2001 2 2 2 2 2 0 2 + 7: 1111 707f 2001 1 1 1 1 1 0 1 Register 7 for the ports is the default vlan tag register, and in the non-working setup, it has been set to 2, despite vlan 2 not being configured. This causes the switch to drop all packets coming in to these ports. The working setup has the default vlan tag register set to 1, which is the default vlan when none is configured. Inspection of the code reveals why. The code prior to this commit was: - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... - if (!err && vlan->flags & BRIDGE_VLAN_INFO_PVID) - err = ds->drv->port_pvid_set(ds, p->port, vid); but the new code is: + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... + } ... + if (pvid) + err = _mv88e6xxx_port_pvid_set(ds, port, vid); This causes the new code to always set the default vlan to one higher than the old code. Fix this. Fixes: 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-2582xx: FCC: Fixing a bug causing to FCC port lock-up (second try)Martin Roth
This is an additional patch to the one already submitted recently. The previous patch was not complete, and the FCC port lock-up scenario has been reproduced in lab. I had an opportunity to check the current patch in lab and the FCC port lock no longer freezes, while the previous patch still locks-up the FCC port. The current patch fixes a pointer arithmetic bug (second bug in the same line), which leads FCC port lock-up during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIVThomas Egerer
The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have to select CRYPTO_ECHAINIV in order to work properly. This solves the issues caused by a misconfiguration as described in [1]. The original approach, patching crypto/Kconfig was turned down by Herbert Xu [2]. [1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html [2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2 Signed-off-by: Thomas Egerer <hakke_007@gmx.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25ath9k_hw: ignore eeprom magic mismatch on flash based devicesFelix Fietkau
Many AR913x based devices (maybe others too) do not have a valid EEPROM magic in their calibration data partition. Fixes: 6fa658fd5ab2 ("ath9k: Simplify and fix eeprom endianness swapping") Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-25rtlwifi: rtl8821ae: Fix 5G failure when EEPROM is incorrectly encodedLarry Finger
Recently, it has been reported that D-Link DWA-582 cards, which use an RTL8812AE chip are not able to scan for 5G networks. The problems started with kernel 4.2, which is the first version that had commit d10101a60372 ("rtlwifi: rtl8821ae: Fix problem with regulatory information"). With this patch, the driver went from setting a default channel plan to using the value derived from EEPROM. Bug reports at https://bugzilla.kernel.org/show_bug.cgi?id=111031 and https://bugzilla.redhat.com/show_bug.cgi?id=1279653 are examples of this problem. The problem was solved once I learned that the internal country code was resulting in a regulatory set with only 2.4 GHz channels. With the RTL8821AE chips available to me, the country code was such that both 2.4 and 5 GHz channels are allowed. The fix is to allow both bands even when the EEPROM is incorrectly encoded. Fixes: d10101a60372 ("rtlwifi: rtl8821ae: Fix problem with regulatory information") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: littlesmartguy@gmail.com Cc: gabe@codehaus.org Cc: Stable <stable@vger.kernel.org> [v4.2+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-25rt2x00: fix monitor mode regressionEli Cooper
Since commit df1404650ccb ("mac80211: remove support for IFF_PROMISC") monitor mode for rt2x00 has been made effectively useless because the hardware filter is configured to drop packets whose intended recipient is not the device, regardless of the presence of monitor mode interfaces. This patch fixes this regression by adding explicit monitor mode support, and by configuring the hardware filter accordingly. Signed-off-by: Eli Cooper <elicooper@gmx.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-24sctp: allow setting SCTP_SACK_IMMEDIATELY by the applicationMarcelo Ricardo Leitner
This patch extends commit b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension") as it didn't white list SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be understood as an invalid flag and returning -EINVAL to the application. Note that the actual handling of the flag is already there in sctp_datamsg_from_user(). https://tools.ietf.org/html/rfc7053#section-7 Fixes: b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24net: simplify napi_synchronize() to avoid warningsArnd Bergmann
The napi_synchronize() function is defined twice: The definition for SMP builds waits for other CPUs to be done, while the uniprocessor variant just contains a barrier and ignores its argument. In the mvneta driver, this leads to a warning about an unused variable when we lookup the NAPI struct of another CPU and then don't use it: ethernet/marvell/mvneta.c: In function 'mvneta_percpu_notifier': ethernet/marvell/mvneta.c:2910:30: error: unused variable 'other_port' [-Werror=unused-variable] There are no other CPUs on a UP build, so that code never runs, but gcc does not know this. The nicest solution seems to be to turn the napi_synchronize() helper into an inline function for the UP case as well, as that leads gcc to not complain about the argument being unused. Once we do that, we can also combine the two cases into a single function definition and use if(IS_ENABLED()) rather than #ifdef to make it look a bit nicer. The warning first came up in linux-4.4, but I failed to catch it earlier. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: f86428854480 ("net: mvneta: Statically assign queues to CPUs") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24pptp: fix illegal memory access caused by multiple bind()sHannes Frederic Sowa
Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade36acad ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov <xeb@mail.ru> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Dave Jones <davej@codemonkey.org.uk> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24drivers: net: xgene: fix extra IRQ issueIyappan Subramanian
For interrupt controller that doesn't support irq_disable and hardware with level interrupt, an extra interrupt may be pending. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line, as suggested by, 'commit e9849777d0e2 ("genirq: Add flag to force mask in disable_irq[_nosync]()")' Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24af_unix: fix struct pid memory leakEric Dumazet
Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02b007 ("net: fix multithreaded signal handling in unix recv routines") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24iwlwifi: add device ID for 8265Oren Givon
Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-24iwlwifi: add new 3168 series devices supportOren Givon
Add new sub-system PCI IDs to the 3168 series. Added 0x2010, 0x2050 and 0x2150 sub-system IDs. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-21net: sock: remove dead cgroup methods from struct protoJohannes Weiner
The cgroup methods are no longer used after baac50bbc3cd ("net: tcp_memcontrol: simplify linkage between socket and page counter"). The hunk to delete them was included in the original patch but must have gotten lost during conflict resolution on the way upstream. Fixes: baac50bbc3cd ("net: tcp_memcontrol: simplify linkage between socket and page counter") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: phy: smsc: Fix disabling energy detect modeTeresa Remmet
When the lan87xx_read_status function is getting called the energy detect mode is enabled again even if it has been disabled by device tree. Added private struct to check the energy detect status. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21Merge branch 'mvneta-multi-clk'David S. Miller
Jisheng Zhang says: ==================== net: mvneta: support more than one clk Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides "core" clk for the mac core, and "axi" clk for the AXI bus logic. This series tries to addess the "more than one clk" issue. Note: to support BG4CT, we have lots of refactor work to do, eg. BG4CT doesn't have mbus concept etc. Since v2: - Name the optional clock as "bus", which is a bit more flexible. Since v1: - Add Thomas Acks to patch1 and patch2. - make sure the headers are really sorted (some headers are still unsorted in v1). - disable axi clk before disabling core clk, Thank Thomas. - update dt binding as Thomas suggested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: update clocks property and document additional clock-namesJisheng Zhang
Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: get optional bus clkJisheng Zhang
Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides one clk for the mac core, and one clk for the AXI bus logic. Obviously this bus clk also need to be enabled. This patch adds this optional "bus" clk support. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: Try to get named core clock firstJisheng Zhang
Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides one clk for the mac core, and one clk for the AXI bus logic. To support for more than one clock, we'll need to distinguish between the clock by name. Change clock probing to first try to get "core" clock before falling back to unnamed clock. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: sort the headers in alphabetic orderJisheng Zhang
Sorting the headers in alphabetic order will help to reduce the conflict when adding new headers in the future. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: fix trivial cut-off issue in mvneta_ethtool_update_statsJisheng Zhang
When s->type is T_REG_64, the high 32bits are lost in val. This patch fixes this trivial issue. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Fixes: 9b0cdefa4cd5 ("net: mvneta: add ethtool statistics") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: hns: enet specifies a reference to dsafyankejian
This patch replace the assoication between dsaf and enet from string matching to object reference. It requires the DTS to be updated within BIOS. Thanks god it can be done for all released boards. Signed-off-by: Kejian Yan <yankejian@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21tcp: fix NULL deref in tcp_v4_send_ack()Eric Dumazet
Neal reported crashes with this stack trace : RIP: 0010:[<ffffffff8c57231b>] tcp_v4_send_ack+0x41/0x20f ... CR2: 0000000000000018 CR3: 000000044005c000 CR4: 00000000001427e0 ... [<ffffffff8c57258e>] tcp_v4_reqsk_send_ack+0xa5/0xb4 [<ffffffff8c1a7caa>] tcp_check_req+0x2ea/0x3e0 [<ffffffff8c19e420>] tcp_rcv_state_process+0x850/0x2500 [<ffffffff8c1a6d21>] tcp_v4_do_rcv+0x141/0x330 [<ffffffff8c56cdb2>] sk_backlog_rcv+0x21/0x30 [<ffffffff8c098bbd>] tcp_recvmsg+0x75d/0xf90 [<ffffffff8c0a8700>] inet_recvmsg+0x80/0xa0 [<ffffffff8c17623e>] sock_aio_read+0xee/0x110 [<ffffffff8c066fcf>] do_sync_read+0x6f/0xa0 [<ffffffff8c0673a1>] SyS_read+0x1e1/0x290 [<ffffffff8c5ca262>] system_call_fastpath+0x16/0x1b The problem here is the skb we provide to tcp_v4_send_ack() had to be parked in the backlog of a new TCP fastopen child because this child was owned by the user at the time an out of window packet arrived. Before queuing a packet, TCP has to set skb->dev to NULL as the device could disappear before packet is removed from the queue. Fix this issue by using the net pointer provided by the socket (being a timewait or a request socket). IPv6 is immune to the bug : tcp_v6_send_response() already gets the net pointer from the socket if provided. Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jerry Chu <hkchu@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21tunnels: Allow IPv6 UDP checksums to be correctly controlled.Jesse Gross
When configuring checksums on UDP tunnels, the flags are different for IPv4 vs. IPv6 (and reversed). However, when lightweight tunnels are enabled the flags used are always the IPv4 versions, which are ignored in the IPv6 code paths. This uses the correct IPv6 flags, so checksums can be controlled appropriately. Fixes: a725e514 ("vxlan: metadata based tunneling for IPv6") Fixes: abe492b4 ("geneve: UDP checksum configuration via netlink") Signed-off-by: Jesse Gross <jesse@kernel.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21Merge branch 'fix-phy-ignore-interrupts'David S. Miller
Florian Fainelli says: ==================== net: phy: Finally fix PHY_IGNORE_INTERRUPTS This patch series finally fixes how PHY_IGNORE_INTERRUPTS are treated by avoiding to poll the PHY *and* getting notified from link state changes by the Ethernet MAC interrupt service routine. Tested with bcmgenet since this is the HW that I have access to. Targetting the "net" tree since these are bugfixes, but I would like Woojun and Andrew to take a look and test that on their respective HW setups as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 19:47:45 +0000