summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-19drm/amd/display: Treat bad EDID as no EDIDEric Yang
We have an mst dock firmware that will emulate an EDID with bad checksum. v2: Tread -> Treat Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Remove duplicate entries from BIOS function tableKen Chalmers
Identical to the two entries above them. Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Make FBC work without fbdev emulationRoman Li
Previously, FBC dynamic allocation relied on connector modes populated during dm init. This is only the case if DRM_FBDEV_EMULATION config flag is enabled. Moving fbc allocation from dm_late_init() to amdgpu_dm_connector_get_modes() where actual modes init happens. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Shirish Shankarappa <Shirish.S@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Remove delay on disconnect patchJohn Barberiz
HDMI HPD's generic solution makes the monitor patch code unnecessary so anything related has been removed. Signed-off-by: John Barberiz <jbarberi@amd.com> Reviewed-by: John Barberiz <jbarberi@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Skip 2 frames when first reading CRCLeo (Sunpeng) Li
Skipping the first frame will prevent uncoooked values most of the time. However, in some unlikely cases, the second frame will be uncooked as well. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Expose DCE110 CRC functions for DCE8Leo (Sunpeng) Li
Implement CRC for DCE8. Registers remain the same, so call DCE110 code directly. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Rework DCE transform bit depth reduction programming.Leo (Sunpeng) Li
Clear up the logic, and enable programming truncation as a bit reduction mode. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: When enabling CRC, disable dither & enable truncationLeo (Sunpeng) Li
When user-mode is using 8bpc, the hardware represents it internally using a higher bit depth. This causes problems when comparing CRCs for color managment tests. We need to disable dithering as well, since it makes CRC values non-deterministic. It's easy to see why dithering needs to be disabled, The reason why truncation also needs to be enabled is better described with an example. Consider the folowing which tests the color transform matrix (CTM): Expected CRC = FB_A -> Degamma (Bypassed) -> CTM (Bypassed) | v Obtain CRC <- Regamma(Bypassed) Actual CRC = FB_B -> Degamma (Bypassed) -> CTM (0.5*Identity) | v Obtain CRC <- Regamma(Bypassed) FB_A contains a solid red color at half intensity (127 @ 8bpc) FB_B contains a solid red color at full intensity (255 @ 8bpc) We expect that Expected CRC = Actual CRC, but that's not the case. When the CTM is applied, the output is at half intensity, but also at a higher bit depth within hardware. i.e. 255/2 = 127.5: not representable in 8bpc, but can be at 10bpc. This causes the two CRC's to be different. The solution is to truncate the output bit depth to the same as input when enabling CRC capture. Since Linux only supports 8bpc, hard code that for now. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Expose dither setting functionality to LinuxLeo (Sunpeng) Li
We will need this to disable dither for CRC capture. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Refactor max color lut entries into a macro.Leo (Sunpeng) Li
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Hookup color management functionsLeo (Sunpeng) Li
Hookup new color management functions into amdgpu_dm: - Notify DRM that we support CRTC color management during CRTC init - Call color management functions within atomic check to update dc states in preparation for a commit Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Implement color managementLeo (Sunpeng) Li
Implement color management functionalities within amdgpu_dm_color, and expose functions within amdgpu_dm.h. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Add color module's gamma helpers to Linux buildLeo (Sunpeng) Li
Also guard includes that we don't need. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Use hardware max low point when sampling OTFLeo (Sunpeng) Li
The MAX_LOW_POINT macro should reflect the maximum low point within hardware. Otherwise, sampling for the hardware points from the output transfer function (OTF) will be incorrect. Also, fix usage of MAX_LOW_POINT accordingly. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Make couple functions in DCE80 TG staticHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Re-use DCE100 display_power_gating for DCE80Harry Wentland
Both functions are the same Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Remove unused DCE80 compressorHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Keep eDP stream enabled during boot.Yongqiang Sun
This path fixed specific eDP panel cold boot black screen due to unnecessary enable link. Change: In case of boot up with eDP, if OS is going to set mode on eDP, keep eDP light up, do not disable and reset corresponding HW. This change may affect dce asics and S3/S4 Resume with multi-monitor. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: dal 3.1.34Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: disable seamless vp adjustment for mirrored surfaceDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: add monitor patch for delay after DP receive power upMartin Tsai
Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Change blackout time to 0 on CZ/STHarry Wentland
These should only be non-0 if big hammer w/a is implemented. Currently DC doesn't implement it, so leave them 0. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: add force_trigger even to static screen controlCharlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: dal 3.1.33Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: boot up/S4 fix mainlink off before BL.Charlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: VGA black screen from s3 when attached to hookHersen Wu
[Description] For MST, DC already notify MST sink for MST mode, DC stll check DP SINK DPCD register to see if MST enabled. DP RX firmware may not handle this properly. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Rearchitecture HDMI HPDJohn Barberiz
- Disabled HPD filter and used HPD software timer instead - Allows DM to disable HPD filtering Signed-off-by: John Barberiz <jbarberi@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Fix potential uninitialized use of 'idle' in amdgpu_ids.cHarry Wentland
v2: Use NULL and reverse christmas tree ordering Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Unify the dm resume calls into oneMikita Lipski
amdgpu_dm_display_resume is now called from dm_resume to unify DAL resume call into a single function call There is no more need to separately call 2 resume functions for DM. Initially they were separated to resume display state after cursor is pinned. But because there is no longer any corruption with the cursor - the calls can be merged into one function hook. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Add a missing lock for drm_mm_takedownMikita Lipski
Inside amdgpu_gtt_mgr_fini add a missing lock to maintain locking balance Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: cleanup VCN IB generationChristian König
Start to use amdgpu_bo_create_reserved v2. v2: Fix missing pointer init to NULL. Remove extra new lines. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Tested-and-Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: fix and cleanup UVD IB generationChristian König
We didn't synced the BO after validating it. Also sart to use amdgpu_bo_create_reserved to simplify things. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Remove unused CFLAGS entry in DML MakefileHarry Wentland
Missed that with a previous change that removed unused files. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/radeon: remove extra TT unpopulated checkChristian König
The subsystem should check that, not the driver. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: remove extra TT unpopulated checkChristian König
The subsystem should check that, not the driver. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/ttm: add ttm_tt_populate wrapperChristian König
Stop calling the driver callback directly. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19amdgpu/dc/calcs: Support clang option for stack alignmentMatthias Kaehlcke
calcs uses the compiler option -mpreferred-stack-boundary=4 to configure a stack alignment of 16 bytes. Clang uses the option -mstack-alignment instead, which expects as parameter the alignment in bytes, and not a power of two like -mpreferred-stack-boundary. Probe for both compiler options and use the correct one, similar to what is done in arch/x86/Makefile. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19amdgpu/dc/dml: Support clang option for stack alignmentMatthias Kaehlcke
DML uses the compiler option -mpreferred-stack-boundary=4 to configure a stack alignment of 16 bytes. Clang uses the option -mstack-alignment instead, which expects as parameter the alignment in bytes, and not a power of two like -mpreferred-stack-boundary. Probe for both compiler options and use the correct one, similar to what is done in arch/x86/Makefile. Reported-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19amdgpu/dc/calcs: Consolidate redundant CFLAGSMatthias Kaehlcke
Use a variable for common CFLAGS instead of specifying the same flags for every source file. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19amdgpu/dc/dml: Consolidate redundant CFLAGSMatthias Kaehlcke
Use a variable for common CFLAGS instead of specifying the same flags for every source file. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Add place holder for soc15 asic init on emulationShaoyun Liu
Add common smu_soc_asic_init function to emulate the sillicon post sequence Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Double the timeout count on emulation modeShaoyun Liu
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Avoid get vram info from atom bios on emulation modeShaoyun Liu
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Fix none-powerplay issue when load driver on emulation modeShaoyun Liu
On emulation mode , driver will be loaded with powerplay disabled Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Basic emulation supportShaoyun Liu
Add amdgpu_emu_mode module parameter to control the emulation mode Avoid vbios operation on emulation since there is no vbios post duirng emulation, use the common hw_init to simulate the post Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Acked-By: Alex Deucher <alexander.deucher@amd.com> Acked-By: Christian Konig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: add new device to use atpx quirkKai-Heng Feng
The affected system (0x0813) is pretty similar to another one (0x0812), it also needs to use ATPX power control. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-02-19drm/amd/pp: Restore power profile mode in auto dpm level on Vega10Rex Zhu
As auto power profile mode still not support on vega10, so just restore default profile mode in auto dpm level. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: Get/set dgpu power cap via hwmon APIRex Zhu
v2: change power unit to microWatt Adust power limit through power1_cap Get min/max power limit through power1_cap_min/power1_cap_max Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/pp: Expose set/get_power_limit for DGPURex Zhu
User can change power limit between [0, 1] * max power limit. Set power limit to 0, restore to max power limit. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19amdgpu/dc: Fix enum mismatch in calls to program_color_matrix()Matthias Kaehlcke
The driver passes GRAPHICS_CSC_ADJUST_TYPE_SW of type enum graphics_csc_adjust_type to program_color_matrix(), however the function expects a parameter of type enum grph_color_adjust_option. Supposedly the intention was to pass GRPH_COLOR_MATRIX_SW, which has the same value as GRAPHICS_CSC_ADJUST_TYPE_SW, so the mismatch didn't cause any trouble. Pass GRPH_COLOR_MATRIX_SW to program_color_matrix() instead of GRAPHICS_CSC_ADJUST_TYPE_SW, this also fixes the following warning when building the kernel with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c:1129:24: error: implicit conversion from enumeration type 'enum graphics_csc_adjust_type' to different enumeration type 'enum grph_color_adjust_option' [-Werror,-Wenum-conversion] xfm_dce, tbl_entry, GRAPHICS_CSC_ADJUST_TYPE_SW); Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-02-07 18:27:10 +0000