| Age | Commit message (Collapse) | Author |
|---|
|
If the layout is invalid, then just log a '0' value.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When SEV is enabled gmr's and mob's are explicitly disabled because
the encrypted system memory can not be used by the hypervisor.
The driver was disabling GMR's but the presentation code, which depends
on GMR's, wasn't honoring it which lead to black screen on hosts
with SEV enabled.
Make sure screen objects presentation is not used when guest memory
regions have been disabled to fix presentation on SEV enabled hosts.
Fixes: 3b0d6458c705 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nicholas Hunt <nhunt@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201175341.491884-1-zack@kde.org
|
|
When __do_semtimedop() goes to sleep because it has to wait for a
semaphore value becoming zero or becoming bigger than some threshold, it
links the on-stack sem_queue to the sem_array, then goes to sleep
without holding a reference on the sem_array.
When __do_semtimedop() comes back out of sleep, one of two things must
happen:
a) We prove that the on-stack sem_queue has been disconnected from the
(possibly freed) sem_array, making it safe to return from the stack
frame that the sem_queue exists in.
b) We stabilize our reference to the sem_array, lock the sem_array, and
detach the sem_queue from the sem_array ourselves.
sem_array has RCU lifetime, so for case (b), the reference can be
stabilized inside an RCU read-side critical section by locklessly
checking whether the sem_queue is still connected to the sem_array.
However, the current code does the lockless check on sem_queue before
starting an RCU read-side critical section, so the result of the
lockless check immediately becomes useless.
Fix it by doing rcu_read_lock() before the lockless check. Now RCU
ensures that if we observe the object being on our queue, the object
can't be freed until rcu_read_unlock().
This bug is only hittable on kernel builds with full preemption support
(either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full).
Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ACPI uses the CXL _OSC support method to communicate the available CXL
functionality to FW. The CXL _OSC support method includes a field to
indicate the OS is capable of RCD mode. FW can potentially change it's
operation depending on the _OSC support method reported by the OS.
The ACPI driver currently only sets the ACPI _OSC support method to
indicate CXL VH mode. Change the capability reported to also include
CXL RCD mode.
[1] CXL3.0 Table 9-26 'Interpretation of CXL _OSC Support Field'
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
[rrichter@amd.com: Reworded patch description.]
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: http://lore.kernel.org/r/Y4cRV/Sj0epVW7bE@rric.localdomain
Link: https://lore.kernel.org/r/166993046717.1882361.10587956243041624761.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In an RCH topology a CXL host-bridge as Root Complex Integrated Endpoint
the represents the memory expander. Unlike a VH topology there is no
CXL/PCIE Root Port that host the endpoint. The CXL subsystem maps this
as the CXL root object (ACPI0017 on ACPI based systems) targeting the
host-bridge as a dport, per usual, but then that dport directly hosts
the endpoint port.
Mock up that configuration with a 4th host-bridge that has a 'cxl_rcd'
device instance as its immediate child.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/166993046170.1882361.12460762475782283638.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Unlike a CXL memory expander in a VH topology that has at least one
intervening 'struct cxl_port' instance between itself and the CXL root
device, an RCD attaches one-level higher. For example:
VH
┌──────────┐
│ ACPI0017 │
│ root0 │
└─────┬────┘
│
┌─────┴────┐
│ dport0 │
┌─────┤ ACPI0016 ├─────┐
│ │ port1 │ │
│ └────┬─────┘ │
│ │ │
┌──┴───┐ ┌──┴───┐ ┌───┴──┐
│dport0│ │dport1│ │dport2│
│ RP0 │ │ RP1 │ │ RP2 │
└──────┘ └──┬───┘ └──────┘
│
┌───┴─────┐
│endpoint0│
│ port2 │
└─────────┘
...vs:
RCH
┌──────────┐
│ ACPI0017 │
│ root0 │
└────┬─────┘
│
┌───┴────┐
│ dport0 │
│ACPI0016│
└───┬────┘
│
┌────┴─────┐
│endpoint0 │
│ port1 │
└──────────┘
So arrange for endpoint port in the RCH/RCD case to appear directly
connected to the host-bridge in its singular role as a dport. Compare
that to the VH case where the host-bridge serves a dual role as a
'cxl_dport' for the CXL root device *and* a 'cxl_port' upstream port for
the Root Ports in the Root Complex that are modeled as 'cxl_dport'
instances in the CXL topology.
Another deviation from the VH case is that RCDs may need to look up
their component registers from the Root Complex Register Block (RCRB).
That platform firmware specified RCRB area is cached by the cxl_acpi
driver and conveyed via the host-bridge dport to the cxl_mem driver to
perform the cxl_rcrb_to_component() lookup for the endpoint port
(See 9.11.8 CXL Devices Attached to an RCH for the lookup of the
upstream port component registers).
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045621.1882361.1730100141527044744.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Camerom <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
tl;dr: Clean up an unnecessary export and enable cxl_test.
An RCD (Restricted CXL Device), in contrast to a typical CXL device in
a VH topology, obtains its component registers from the bottom half of
the associated CXL host bridge RCRB (Root Complex Register Block). In
turn this means that cxl_rcrb_to_component() needs to be called from
devm_cxl_add_endpoint().
Presently devm_cxl_add_endpoint() is part of the CXL core, but the only
user is the CXL mem module. Move it from cxl_core to cxl_mem to not only
get rid of an unnecessary export, but to also enable its call out to
cxl_rcrb_to_component(), in a subsequent patch, to be mocked by
cxl_test. Recall that cxl_test can only mock exported symbols, and since
cxl_rcrb_to_component() is itself inside the core, all callers must be
outside of cxl_core to allow cxl_test to mock it.
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045072.1882361.13944923741276843683.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Provide an interface to match a per device domain bus token. This allows to
query which type of domain is installed for a particular domain id. Will be
used for PCI to avoid frequent create/remove cycles for the MSI resp. MSI-X
domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.738047902@linutronix.de
|
|
Now that all prerequsites are in place, provide the actual interfaces for
creating and removing per device interrupt domains.
MSI device interrupt domains are created from the provided
msi_domain_template which is duplicated so that it can be modified for the
particular device.
The name of the domain and the name of the interrupt chip are composed by
"$(PREFIX)$(CHIPNAME)-$(DEVNAME)"
$PREFIX: The optional prefix provided by the underlying MSI parent domain
via msi_parent_ops::prefix.
$CHIPNAME: The name of the irq_chip in the template
$DEVNAME: The name of the device
The domain is further initialized through a MSI parent domain callback which
fills in the required functionality for the parent domain or domains further
down the hierarchy. This initialization can fail, e.g. when the requested
feature or MSI domain type cannot be supported.
The domain pointer is stored in the pointer array inside of msi_device_data
which is attached to the domain.
The domain can be removed via the API or left for disposal via devres when
the device is torn down. The API removal is useful e.g. for PCI to have
seperate domains for MSI and MSI-X, which are mutually exclusive and always
occupy the default domain id slot.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.678838546@linutronix.de
|
|
Per device domains require the device pointer of the device which
instantiated the domain for some purposes. Add the pointer to struct
irq_domain. It will be used in the next step which provides the
infrastructure to create per device MSI domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.618807601@linutronix.de
|
|
Split the functionality of msi_create_irq_domain() so it can
be reused for creating per device irq domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.559086358@linutronix.de
|
|
To allow proper range checking especially for dynamic allocations add a
size field to struct msi_domain_info. If the field is 0 then the size is
unknown or unlimited (up to MSI_MAX_INDEX) to provide backwards
compability.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.501144862@linutronix.de
|
|
Provide struct msi_domain_template which contains a bundle of struct
irq_chip, struct msi_domain_ops and struct msi_domain_info and a name
field.
This template is used by MSI device domain implementations to provide the
domain specific functionality, feature bits etc.
When a MSI domain is created the template is duplicated in the core code
so that it can be modified per instance. That means templates can be
marked const at the MSI device domain code.
The template is a bundle to avoid several allocations and duplications
of the involved structures.
The name field is used to construct the final domain and chip name via:
$PREFIX$NAME-$DEVNAME
where prefix is the optional prefix of the MSI parent domain, $NAME is the
provided name in template::chip and the device name so that the domain
is properly identified. On x86 this results for PCI/MSI in:
PCI-MSI-0000:3d:00.1 or IR-PCI-MSIX-0000:3d:00.1
depending on the domain type and the availability of remapping.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.442499757@linutronix.de
|
|
MSI parent domains must have some control over the MSI domains which are
built on top. On domain creation they need to fill in e.g. architecture
specific chip callbacks or msi domain ops to make the outermost domain
parent agnostic which is obviously required for architecture independence
etc.
The structure contains:
1) A bitfield which exposes the supported functional features. This
allows to check for features and is also used in the initialization
callback to mask out unsupported features when the actual domain
implementation requests a broader range, e.g. on x86 PCI multi-MSI
is only supported by remapping domains but not by the underlying
vector domain. The PCI/MSI code can then always request multi-MSI
support, but the resulting feature set after creation might not
have it set.
2) An optional string prefix which is put in front of domain and chip
names during creation of the MSI domain. That allows to keep the
naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix
when interrupt remapping is enabled.
3) An initialization callback to sanity check the domain info of
the to be created MSI domain, to restrict features and to
apply changes in MSI ops and interrupt chip callbacks to
accomodate to the particular MSI parent implementation and/or
the underlying hierarchy.
Add a conveniance function to delegate the initialization from the
MSI parent domain to an underlying domain in the hierarchy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
|
|
These flags got added as necessary and have no obvious structure. For
feature support checks and masking it's convenient to have two blocks of
flags:
1) Flags to control the internal behaviour like allocating/freeing
MSI descriptors. Those flags do not need any support from the
underlying MSI parent domain. They are mostly under the control
of the outermost domain which implements the actual MSI support.
2) Flags to expose features, e.g. PCI multi-MSI or requirements
which can depend on a underlying domain.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.322714918@linutronix.de
|
|
Now that all users are converted remove the old interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.694291814@linutronix.de
|
|
Switch to the new domain id aware interfaces to phase out the previous
ones. Remove the domain check as it happens in the core code now.
No functional change.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.634800247@linutronix.de
|
|
Switch to the new domain id aware interfaces to phase out the previous
ones.
Get rid of the MSI descriptor and domain checks as the core code detects
these issues anyway.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.575538524@linutronix.de
|
|
Switch to the new domain id aware interfaces to phase out the previous
ones. No functional change.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.513924920@linutronix.de
|
|
Switch to the new domain id aware interfaces to phase out the previous
ones. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.455168748@linutronix.de
|
|
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_alloc_irqs_range():
Handles a caller defined precise range
- msi_domain_alloc_irqs_all():
Allocates all interrupts associated to a domain by scanning the
allocated MSI descriptors
The latter is useful for the existing PCI/MSI support which does not have
range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.396497163@linutronix.de
|
|
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_free_irqs_range():
Handles a caller defined precise range
- msi_domain_free_irqs_all():
Frees all interrupts associated to a domain
The latter is useful for device teardown and to handle the legacy MSI support
which does not have any range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.337844751@linutronix.de
|
|
Allocating simple interrupt descriptors in the core code has to be multi
device irqdomain aware for the upcoming PCI/IMS support.
Change the interfaces to take a domain id into account. Use the internal
control struct for transport of arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.279112474@linutronix.de
|
|
Change the descriptor free functions to take a domain id to prepare for the
upcoming multi MSI domain per device support.
To avoid changing and extending the interfaces over and over use an core
internal control struct and hand the pointer through the various functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.220788011@linutronix.de
|
|
Change the descriptor allocation and insertion functions to take a domain
id to prepare for the upcoming multi MSI domain per device support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.163043028@linutronix.de
|
|
This reflects the functionality better. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.103554618@linutronix.de
|
|
In preparation of the upcoming per device multi MSI domain support, change
the interface to support lookups based on domain id and zero based index
within the domain.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.044613697@linutronix.de
|
|
To support multiple MSI interrupt domains per device it is necessary to
segment the xarray MSI descriptor storage. Each domain gets up to
MSI_MAX_INDEX entries.
Change the iterators so they operate with domain ids and take the domain
offsets into account.
The publicly available iterators which are mostly used in legacy
implementations and the PCI/MSI core default to MSI_DEFAULT_DOMAIN (0)
which is the id for the existing "global" domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.985498981@linutronix.de
|
|
With the upcoming per device MSI interrupt domain support it is necessary
to store the domain pointers per device.
Instead of delegating that storage to device drivers or subsystems add a
domain pointer to the msi_dev_domain array in struct msi_device_data.
This pointer is also used to take care of tearing down the irq domains when
msi_device_data is cleaned up via devres.
The interfaces into the MSI core will be changed from irqdomain pointer
based interfaces to domain id based interfaces to support multiple MSI
domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS.
Once the per device domain support is complete the irq domain pointer in
struct device::msi.domain will not longer contain a pointer to the "global"
MSI domain. It will contain a pointer to the MSI parent domain instead.
It would be a horrible maze of conditionals to evaluate all over the place
which domain pointer should be used, i.e. the "global" one in
device::msi::domain or one from the internal pointer array.
To avoid this evaluate in msi_setup_device_data() whether the irq domain
which is associated to a device is a "global" or a parent MSI domain. If it
is global then copy the pointer into the first entry of the msi_dev_domain
array.
This allows to convert interfaces and implementation to domain ids while
keeping everything existing working.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de
|
|
The upcoming support for multiple MSI domains per device requires storage
for the MSI descriptors and in a second step storage for the irqdomain
pointers.
Move the xarray into a separate data structure msi_dev_domain and create an
array with size 1 in msi_device_data, which can be expanded later when the
support for per device domains is implemented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.864887773@linutronix.de
|
|
In the upcoming per device MSI domain concept the MSI parent domains are
not allowed to be used as regular MSI domains where the MSI allocation/free
operations are applicable.
Add appropriate checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.806128070@linutronix.de
|
|
Similar to marking parent MSI domains it's required to identify per device
domains. Add flag and helpers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.747627287@linutronix.de
|
|
The new PCI/IMS (Interrupt Message Store) functionality is allowing
hardware vendors to provide implementation specific storage for the MSI
messages. This can be device memory and also host/guest memory, e.g. in
queue memory which is shared with the hardware.
This requires device specific MSI interrupt domains, which cannot be
achieved by expanding the existing PCI/MSI interrupt domain concept which is
a global interrupt domain shared by all PCI devices on a particular (IOMMU)
segment:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
This works because the PCI/MSI[-X] space is uniform, but falls apart with
PCI/IMS which is implementation defined and must be available along with
PCI/MSI[-X] on the same device.
To support PCI/MSI[-X] plus PCI/IMS on the same device it is required to
rework the PCI/MSI interrupt domain hierarchy concept in the following way:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
That allows in the next step to create multiple interrupt domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
So the domain which previously created the global PCI/MSI domain must now
act as parent domain for the per device domains.
The hierarchy depth is the same as before, but the PCI/MSI domains are then
device specific and not longer global.
Provide IRQ_DOMAIN_FLAG_MSI_PARENT, which allows to identify these parent
domains, along with helpers to query it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.690038274@linutronix.de
|
|
Create a API header for MSI specific functions which are relevant to device
drivers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.632679220@linutronix.de
|
|
irq_domain::dev is a misnomer as it's usually the rule that a device
pointer points to something which is directly related to the instance.
irq_domain::dev can point to some other device for power management to
ensure that this underlying device is not powered down when an interrupt is
allocated.
The upcoming per device MSI domains really require a pointer to the device
which instantiated the irq domain and not to some random other device which
is required for power management down the chain.
Rename irq_domain::dev to irq_domain::pm_dev and fixup the few sites which
use that pointer.
Conversion was done with the help of coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.574541683@linutronix.de
|
|
Tabular alignment of both kernel-doc and the actual struct declaration make
visual parsing way more conveniant.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.514944367@linutronix.de
|
|
It's truly a MSI only flag and for the upcoming per device MSI domains this
must be in the MSI flags so it can be set during domain setup without
exposing this quirk outside of x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.454246167@linutronix.de
|
|
Use bullet-list RST syntax for kernel-doc parameters' flags and interrupt
mode descriptions. Otherwise Sphinx produces "Unexpected identation" errors
and warnings.
Fixes: 5c0997dc33ac24 ("PCI/MSI: Move pci_alloc_irq_vectors() to api.c")
Fixes: 017239c8db2093 ("PCI/MSI: Move pci_irq_vector() to api.c")
Fixes: be37b8428b7b77 ("PCI/MSI: Move pci_irq_get_affinity() to api.c")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ahmed S. Darwish <darwi@linutronix.de>
Link: https://lore.kernel.org/r/20221203100511.222136-1-bagasdotme@gmail.com
|
|
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
Fix an issue with starting the ACP DSP and support debug dumps to aid
maintainability.
|
|
Commit 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()") changed
qe_pin_request() to request and hold GPIO corresponding to a given pin.
Unfortunately this does not work, as fhci-hcd requests these GPIOs
first, befor calling qe_pin_request() (see
drivers/usb/host/fhci-hcd.c::of_fhci_probe()).
To fix it change qe_pin_request() to request GPIOs non-exclusively, and
free them once the code determines GPIO controller and offset for each
GPIO/pin.
Also reaching deep into gpiolib implementation is not the best idea. We
should either export gpio_chip_hwgpio() or keep converting to the global
gpio numbers space until we fix the driver to implement proper pin
control.
Fixes: 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/Y400YXnWBdz1e/L5@google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently we print the transaction aborted message with a debug level, but
a transaction abort is an exceptional event that indicates something went
wrong and it's useful to have it printed with an error level as it helps
analysing problems in a production environment, where debug level messages
are typically not logged. For example reports from syzbot never include
the transaction aborted message, since the log level on the test machines
is above the debug level.
So change the log level from debug to error.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When syncing this code into btrfs-progs Dave noticed there's some things
we were losing in the sync that are needed. This syncs those changes
into the kernel, which include a few comments that weren't in the
kernel, some whitespace changes, an attribute, and the cplusplus bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we get -ENOMEM while dropping file extent items in a given range, at
btrfs_drop_extents(), due to failure to allocate memory when attempting to
increment the reference count for an extent or drop the reference count,
we handle it with a BUG_ON(). This is excessive, instead we can simply
abort the transaction and return the error to the caller. In fact most
callers of btrfs_drop_extents(), directly or indirectly, already abort
the transaction if btrfs_drop_extents() returns any error.
Also, we already have error paths at btrfs_drop_extents() that may return
-ENOMEM and in those cases we abort the transaction, like for example
anything that changes the b+tree may return -ENOMEM due to a failure to
allocate a new extent buffer when COWing an existing extent buffer, such
as a call to btrfs_duplicate_item() for example.
So replace the BUG_ON() calls with proper logic to abort the transaction
and return the error.
Reported-by: syzbot+0b1fb6b0108c27419f9f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000089773e05ee4b9cb4@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
read_one_chunk
Store the error code before freeing the extent_map. Though it's
reference counted structure, in that function it's the first and last
allocation so this would lead to a potential use-after-free.
The error can happen eg. when chunk is stored on a missing device and
the degraded mount option is missing.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721
Reported-by: eriri <1527030098@qq.com>
Fixes: adfb69af7d8c ("btrfs: add_missing_dev() should return the actual error")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: void0red <void0red@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As of commit 193df6245704 ("btrfs: search for last logged dir index if
it's not cached in the inode"), the overwrite_item() function is always
called for a root that is from a fs/subvolume tree. In other words, now
it's only used during log replay to modify a fs/subvolume tree. Therefore
we can remove the logic that checks if we are dealing with a log tree at
overwrite_item().
So remove that logic, replacing it with an assertion and document that if
we ever need to support a log root there, we will need to clone the leaf
from the fs/subvolume tree and then release it before modifying the log
tree, which is needed to avoid a potential deadlock, similar to the one
recently fixed by a patch with the subject:
"btrfs: do not modify log tree while holding a leaf from fs tree locked"
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After commit 193df6245704 ("btrfs: search for last logged dir index if
it's not cached in the inode"), there are no more callers of
do_overwrite_item(), except overwrite_item().
Originally both used to be the same function, but were split in
commit 086dcbfa50d3 ("btrfs: insert items in batches when logging a
directory when possible"), as there was the need to execute all logic
of overwrite_item() but skip the tree search, since in the context of
directory logging we already had a path with a leaf to copy data from.
So unify them again as there is no more need to have them split.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Using strncpy() on NUL-terminated strings are deprecated. To avoid
possible forming of non-terminated string strscpy() should be used.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was caught when syncing extent-io-tree.c into btrfs-progs. This
however isn't really a problem, the only way next would be uninitialized
is if we found the range we were looking for, and in this case we don't
care about next. However it's a compile error, so fix it up.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I don't know how this isn't caught when we build this in the kernel, but
while syncing extent-io-tree.c into btrfs-progs I got an error because
parent could potentially be uninitialized when we link in a new node,
specifically when the extent_io_tree is empty. This means we could have
garbage in the parent color. I don't know what the ramifications are of
that, but it's probably not great, so fix this by initializing parent to
NULL. I spot checked all of our other usages in btrfs and we appear to
be doing the correct thing everywhere else.
Fixes: c7e118cf98c7 ("btrfs: open code rbtree search in insert_state")
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add annotations to functions that might sleep due to allocations or IO
and could be called from various contexts. In case of btrfs_search_slot
it's not obvious why it would sleep:
btrfs_search_slot
setup_nodes_for_search
reada_for_balance
btrfs_readahead_node_child
btrfs_readahead_tree_block
btrfs_find_create_tree_block
alloc_extent_buffer
kmem_cache_zalloc
/* allocate memory non-atomically, might sleep */
kmem_cache_alloc(GFP_NOFS|__GFP_NOFAIL|__GFP_ZERO)
read_extent_buffer_pages
submit_extent_page
/* disk IO, might sleep */
submit_one_bio
Other examples where the sleeping could happen is in 3 places might
sleep in update_qgroup_limit_item(), as shown below:
update_qgroup_limit_item
btrfs_alloc_path
/* allocate memory non-atomically, might sleep */
kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS)
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
