| Age | Commit message (Collapse) | Author |
|---|
|
The PTP configuration for GMAC3_X differs from the other implementations
in several ways :
- There's only one external snapshot trigger
- The snapshot configuration is done through the PTP_TCR register,
whereas the other dwmac variants have a dedicated ACR (auxiliary
control reg) for that purpose
- The layout for the PTP_TCR register also differs, as bits 24/25 are
used for the snapshot configuration. These bits are reserved on other
variants.
On GMAC3_X, we also can't discover the number of snapshot triggers
automatically.
The GMAC3_X has one PPS output, however it's configuration isn't
supported yet so report 0 n_per_out for now.
Introduce a dedicated set of ptp_clock_info ops and configuration
parameters to reflect these differences specific to GMAC3_X.
This was tested on dwmac_socfpga.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-5-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some DWMAC variants such as dwmac1000 don't support discovering the
number of output pps and auxiliary snapshots. Allow these parameters to
be defined in default ptp_clock_info, and let them be updated only when
the feature discovery yielded a result.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The auxiliary snapshot configuration was found to differ depending on
the dwmac version. To prepare supporting this, allow specifying the
ptp_clock_info ops in the hwif array
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stmmac_ptp_clock_ops are copied into the stmmac_priv structure
before being registered to the PTP core. Some adjustments are made prior
to that, such as the number of snapshots or max adjustment parameters.
Instead of modifying the global definition, then copying into the local
private data, let's first copy then modify the local parameters.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: pm: a few more fixes
Three small fixes related to the MPTCP path-manager:
- Patch 1: correctly reflect the backup flag to the corresponding local
address entry of the userspace path-manager. A fix for v5.19.
- Patch 2: hold the PM lock when deleting an entry from the local
addresses of the userspace path-manager to avoid messing up with this
list. A fix for v5.19.
- Patch 3: use _rcu variant to iterate the in-kernel path-manager's
local addresses list, when under rcu_read_lock(). A fix for v5.17.
====================
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-0-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When traversing userspace_pm_local_addr_list and deleting an entry from
it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held.
This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id()
and releases it after list_move() in mptcp_pm_nl_remove_doit().
Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e68 ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_ethtool_get_eee
genphy_c45_eee_is_active() populates both bitmaps only if it returns
successfully. So we can avoid the overhead of the temporary bitmaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/b0832102-28ab-4223-b879-91fb1fc11278@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify the function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/f9a4623b-b94c-466c-8733-62057c6d9a17@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make a minor change to eliminate a static checker warning. The type
of s->ifc is unsigned int, so the correct format specifier should be
%u instead of %d.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241113011142.290474-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jan Stancek says:
====================
tools: ynl: two patches to ease building with rpmbuild
I'm looking to build and package ynl for Fedora and Centos Stream users.
Default rpmbuild has couple hardening options enabled by default [1][2],
which currently prevent ynl from building.
This series contains 2 small patches to address it.
[1] https://fedoraproject.org/wiki/Changes/Harden_All_Packages
[2] https://fedoraproject.org/wiki/Changes/PythonSafePath
====================
Link: https://patch.msgid.link/cover.1731399562.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
ynl Makefiles currently override CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure:
CC sample devlink
/usr/bin/ld: devlink.o: relocation R_X86_64_32 against symbol `ynl_devlink_family' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
Extend CFLAGS to support hardening options set by build environment.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/265b2d5d3a6d4721a161219f081058ed47dc846a.1731399562.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Python options like PYTHONSAFEPATH or -P [1] do not add script
directory to PYTHONPATH. ynl depends on this path to build and run.
[1] This option is default for Fedora rpmbuild since introduction of
https://fedoraproject.org/wiki/Changes/PythonSafePath
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/b26537cdb6e1b24435b50b2ef81d71f31c630bc1.1731399562.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a locking issue in the asymmetric CPU capacity setup code in the
intel_pstate driver that may lead to a deadlock if CPU online/offline
runs in parallel with the code in question, which is unlikely but not
impossible (Rafael Wysocki)"
* tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Rearrange locking in hybrid_init_cpu_capacity_scaling()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature)"
* tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Disable TPM on tpm2_create_primary() failure
tpm: Opt-in in disable PCR integrity protection
|
|
The earlier bug fix misplaced the error-label when dealing with the
tpm2_create_primary() return value, which the original completely ignored.
Cc: stable@vger.kernel.org
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1087331
Fixes: cc7d8594342a ("tpm: Rollback tpm2_load_null()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd37 ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
e1000_down calls netif_queue_set_napi, which assumes that RTNL is held.
There are a few paths for e1000_down to be called in e1000 where RTNL is
not currently being held:
- e1000_shutdown (pci shutdown)
- e1000_suspend (power management)
- e1000_reinit_locked (via e1000_reset_task delayed work)
- e1000_io_error_detected (via pci error handler)
Hold RTNL in three places to fix this issue:
- e1000_reset_task: igc, igb, and e100e all hold rtnl in this path.
- e1000_io_error_detected (pci error handler): e1000e and ixgbe hold
rtnl in this path. A patch has been posted for igc to do the same
[1].
- __e1000_shutdown (which is called from both e1000_shutdown and
e1000_suspend): igb, ixgbe, and e1000e all hold rtnl in the same
path.
The other paths which call e1000_down seemingly hold RTNL and are OK:
- e1000_close (ndo_stop)
- e1000_change_mtu (ndo_change_mtu)
Based on the above analysis and mailing list discussion [2], I believe
adding rtnl in the three places mentioned above is correct.
Fixes: 8f7ff18a5ec7 ("e1000: Link NAPI instances to queues and IRQs")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Closes: https://lore.kernel.org/netdev/8cf62307-1965-46a0-a411-ff0080090ff9@yandex.ru/
Link: https://lore.kernel.org/netdev/20241022215246.307821-3-jdamato@fastly.com/ [1]
Link: https://lore.kernel.org/netdev/ZxgVRX7Ne-lTjwiJ@LQ3V64L9R2/ [2]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
tx_queue_lock and stats_lock are declared and initialized, but never
used. Remove them.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix 2 spelling mistakes in comments in `igb_main.c`.
Signed-off-by: Johnny Park <pjohnny0508@gmail.com>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since the igc driver doesn't support forced speed configuration and
its current related hardware doesn't support it either, there is no
use of the mac.autoneg parameter. Moreover, in one case this usage
might result in a NULL pointer dereference due to an uninitialized
function pointer, phy.ops.force_speed_duplex.
Therefore, remove this parameter from the igc code.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Header ixgbe_type.h includes ixgbe_mbx.h. Also, header
ixgbe_mbx.h included ixgbe_type.h, thus introducing a circular
dependency.
- Remove ixgbe_mbx.h inclusion from ixgbe_type.h.
- ixgbe_mbx.h requires the definition of struct ixgbe_mbx_operations
so move its definition there. While at it, add missing argument
identifier names.
- Add required forward structure declarations.
- Include ixgbe_mbx.h in the .c files that need it, for the
following reasons:
ixgbe_sriov.c uses ixgbe_check_for_msg
ixgbe_main.c uses ixgbe_init_mbx_params_pf
ixgbe_82599.c uses mbx_ops_generic
ixgbe_x540.c uses mbx_ops_generic
ixgbe_x550.c uses mbx_ops_generic
Signed-off-by: Diomidis Spinellis <dds@aueb.gr>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice workqueue doesn't seem to rely on any CPU locality and should
therefore be able to run on any CPU. In practice this is already
happening through the unbound ice_service_timer that may fire anywhere
and queue the workqueue accordingly to any CPU.
Make this official so that the ice workqueue is only ever queued to
housekeeping CPUs on nohz_full.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_vc_query_rxdid() function allocates memory to store the
virtchnl_supported_rxdids structure used to communicate the bitmap of
supported RXDIDs to a VF.
This structure is only 8 bytes in size. The function must hold the
allocated length on the stack as well as the pointer to the structure which
itself is 8 bytes. Allocating this storage on the heap adds unnecessary
overhead including a potential error path that must be handled in case
kzalloc fails. Because this structure is so small, we're not saving stack
space. Additionally, because we must ensure that we free the allocated
memory, the return value from ice_vc_send_msg_to_vf() must also be saved in
the stack ret variable. Depending on compiler optimization, this means
allocating the 8-byte structure is requiring up to 16-bytes of stack
memory!
Simplify this function to keep the rxdid variable on the stack, saving
memory and removing a potential failure exit path from this function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The pf->supported_rxdids field is used to populate the list of valid RXDIDs
that a VF may use when negotiating VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC.
The set of supported RXDIDs is dependent on the DDP, and can be read from
the GLXFLXP_RXDID_FLAGS register. The PF needs to send this list to the
VF upon receiving the VIRTCHNL_OP_GET_SUPPORTED_RXDIDs. It also needs to
use this list to validate the requested descriptor ID from the VF when
programming the Rx queues.
A future update to support VF live migration will also want to validate
that the target VF can support the same descriptor ID when migrating.
Currently, pf->supported_rxdids is initialized inside the
ice_vc_query_rxdid() function. This means that it is only ever initialized
if at least one VF actually tries to negotiate
VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC. It is also unnecessarily re-initialized
every time the VF loads and requests the descriptor list. This worked
before because the PF only checks pf->suppported_rxdids when programming
the Rx queue if the VF actually negotiates the
VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC feature.
This will be problematic for VF live migration. We need the list of
supported Rx descriptor IDs when migrating. It is possible that no VF on
the target PF has ever actually issued a VIRTCHNL_OP_GET_SUPPORTED_RXDIDs.
Refactor the driver to initialize pf->supported_rxdids during driver
initialization after the DDP is loaded. This is simpler, avoids unnecessary
duplicate work, and avoids issues with the live migration process.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently when any VF is trusted and true promiscuous mode is enabled on
the PF, the VF will receive all unicast traffic directed to the device's
internal switch. This includes traffic external to the NIC and also from
other VSI (i.e. VFs). This does not match the expected behavior as
unicast traffic should only be visible from external sources in this
case. Disable the Tx promiscuous mode bits for unicast promiscuous mode.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing NAPIs. This preserves NAPI config settings when queue
counts are adjusted.
Tested with an E810-2CQDA2 NIC.
Begin by setting the queue count to 4:
$ sudo ethtool -L eth4 combined 4
Check the queue settings:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8452,
'ifindex': 4,
'irq': 2782},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8451,
'ifindex': 4,
'irq': 2781},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Now, set the queue with NAPI ID 8451 to have a gro-flush-timeout of
1111:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 8451, "gro-flush-timeout": 1111}'
None
Check that worked:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8452,
'ifindex': 4,
'irq': 2782},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 1111,
'id': 8451,
'ifindex': 4,
'irq': 2781},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Now reduce the queue count to 2, which would destroy the queue with NAPI
ID 8451:
$ sudo ethtool -L eth4 combined 2
Check the queue settings, noting that NAPI ID 8451 is gone:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Now, increase the number of queues back to 4:
$ sudo ethtool -L eth4 combined 4
Dump the settings, expecting to see the same NAPI IDs as above and for
NAPI ID 8451 to have its gro-flush-timeout set to 1111:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8452,
'ifindex': 4,
'irq': 2782},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 1111,
'id': 8451,
'ifindex': 4,
'irq': 2781},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
An optional flag field has been added to the signature segment header.
The field contains two flags, a "valid" bit, and a "last segment" bit
that indicates whether the segment is the last segment that will be
sent to firmware.
If the flag field's valid bit is NOT set, then as was done before,
assume that this is the last segment being downloaded.
However, if the flag field's valid bit IS set, then use the last segment
flag to determine if this segment is the last segment to download.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add ice_ddp_send_hunk() that buffers "sent FW hunk" calls to AQ in order
to mark the "last" one in more elegant way. Next commit will add even
more complicated "sent FW" flow, so it's better to untangle a bit before.
Note that metadata buffers were not skipped for NOT-@indicate_last
segments, this is fixed now.
Minor:
+ use ice_is_buffer_metadata() instead of open coding it in
ice_dwnld_cfg_bufs();
+ ice_dwnld_cfg_bufs_no_lock() + dependencies were moved up a bit to have
better git-diff, as this function was rewritten (in terms of git-blame)
CC: Paul Greenwalt <paul.greenwalt@intel.com>
CC: Dan Nowlin <dan.nowlin@intel.com>
CC: Ahmed Zaki <ahmed.zaki@intel.com>
CC: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Extend the work done in commit 70838938e89c ("ice: Implement driver
functionality to dump serdes equalizer values") by adding the new set of
Rx registers that can be read using command:
$ ethtool -d interface_name
Rx equalization parameters are E810 PHY registers used by end user to
gather information about configuration and status to debug link and
connection issues in the field.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor function ice_get_tx_rx_equa() to iterate over new table of
params instead of multiple calls to ice_aq_get_phy_equalization().
Subsequent commit will extend that function by add more serdes equalizer
values to dump.
Shorten the fields of struct ice_serdes_equalization_to_ethtool for
readability purposes.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS
context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
selftests/bpf: Use -4095 as the bad address for bits iterator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- fix possible CPUs setup logical-physical CPU mapping, in order to
avoid CPU hotplug issue
- fix some KASAN bugs
- fix AP booting issue in VM mode
- some trivial cleanups
* tag 'loongarch-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix AP booting issue in VM mode
LoongArch: Add WriteCombine shadow mapping in KASAN
LoongArch: Disable KASAN if PGDIR_SIZE is too large for cpu_vabits
LoongArch: Make KASAN work with 5-level page-tables
LoongArch: Define a default value for VM_DATA_DEFAULT_FLAGS
LoongArch: Fix early_numa_add_cpu() usage for FDT systems
LoongArch: For all possible CPUs setup logical-physical CPU mapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All
singletons"
* tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: swapfile: fix cluster reclaim work crash on rotational devices
selftests: hugetlb_dio: fixup check for initial conditions to skip in the start
mm/thp: fix deferred split queue not partially_mapped: fix
mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases
nommu: pass NULL argument to vma_iter_prealloc()
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
mm: page_alloc: move mlocked flag clearance into free_pages_prepare()
mm: count zeromap read and set for swapout and swapin
|
|
Sky Huang says:
====================
Re-organize MediaTek ethernet phy drivers and propose mtk-phy-lib
This patchset comes from patch 1/9, 3/9, 4/9, 5/9 and 7/9 of:
https://lore.kernel.org/netdev/20241004102413.5838-1-SkyLake.Huang@mediatek.com/
This patchset changes MediaTek's ethernet phy's folder structure and
integrates helper functions, including LED & token ring manipulation,
into mtk-phy-lib.
---
Change in v2:
- Add correct Reviewed-by tag in each patch.
Change in v3:
[patch 4/5]
- Fix kernel test robot error by adding missing MTK_NET_PHYLIB.
====================
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
|
|
This patch adds MT7530 & MT7531's PHY ID macros in mtk-ge.c so that
it follows the same rule of mtk-ge-soc.c.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch integrates read/write page helper functions as MTK phy lib.
They are basically the same in mtk-ge.c & mtk-ge-soc.c.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mtk_phy_led_hw_ctrl_set()
This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in
mtk_phy_led_hw_ctrl_set(), which improves readability.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch creates mtk-phy-lib.c & mtk-phy.h and integrates mtk-ge-soc.c's
LED helper functions so that we can use those helper functions in other
MTK's ethernet phy driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Geetha sowjanya says:
====================
Introduce RVU representors
This series adds representor support for each rvu devices.
When switchdev mode is enabled, representor netdev is registered
for each rvu device. In implementation of representor model,
one NIX HW LF with multiple SQ and RQ is reserved, where each
RQ and SQ of the LF are mapped to a representor. A loopback channel
is reserved to support packet path between representors and VFs.
CN10K silicon supports 2 types of MACs, RPM and SDP. This
patch set adds representor support for both RPM and SDP MAC
interfaces.
- Patch 1: Implements basic representor driver.
- Patch 2: Add devlink support to create representor netdevs that
can be used to manage VFs.
- Patch 3: Implements basec netdev_ndo_ops.
- Patch 4: Installs tcam rules to route packets between representor and
VFs.
- Patch 5: Enables fetching VF stats via representor interface
- Patch 6: Adds support to sync link state between representors and VFs .
- Patch 7: Enables configuring VF MTU via representor netdevs.
- Patch 8: Adds representors for sdp MAC.
- Patch 9: Adds devlink port support.
- Patch 10: Implements offload stats.
- Patch 11: Implements tc offload support.
- patch 12: Adds documentation for rvu port representor.
pci/0002:1c:00.0
Command to create PF/VF representor
Rpf1vf0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether f6:43:83:ee:26:21 brd ff:ff:ff:ff:ff:ff
Rpf1vf1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 12:b2:54:0e:24:54 brd ff:ff:ff:ff:ff:ff
Rpf1vf2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 4a:12:c4:4c:32:62 brd ff:ff:ff:ff:ff:ff
Rpf1vf3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether ca:cb:68:0e:e2:6e brd ff:ff:ff:ff:ff:ff
Rpf2vf0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 06:cc:ad:b4:f0:93 brd ff:ff:ff:ff:ff:ff
~# devlink port
pci/0002:1c:00.0/0: type eth netdev Rpf1vf0 flavour physical port 0 splittable false
pci/0002:1c:00.0/1: type eth netdev Rpf1vf1 flavour pcivf controller 0 pfnum 1 vfnum 1 external false splittable false
pci/0002:1c:00.0/2: type eth netdev Rpf1vf2 flavour pcivf controller 0 pfnum 1 vfnum 2 external false splittable false
pci/0002:1c:00.0/3: type eth netdev Rpf1vf3 flavour pcivf controller 0 pfnum 1 vfnum 3 external false splittable false
-----------
v11:v1:
- Submitted refactoring changes as a separate patch set.
https://lore.kernel.org/netdev/20241023161843.15543-1-gakula@marvell.com/T/
- Moved documentation to a separate patch.
- patch 9: Added code changes to forward updated mac address to VF.
- Implemented TC offload support.
v10-v11:
- As suggested by "Jiri Pirko" adjusted the documentation.
- Added more commit description to patch1.
v9-v10:
- Fixed build warning w.r.t documentation.
v8-v9:
- Updated the documentation.
v7-v8:
- Implemented offload stats ndo.
- Added documentation.
v6-v7:
- Rebased on top net-next branch.
v5-v6:
- Addressed review comments provided by "Simon Horman".
- Added review tag.
v4-v5:
- Patch 3: Removed devm_* usage in rvu_rep_create()
- Patch 3: Fixed build warnings.
v3-v4:
- Patch 2 & 3: Fixed coccinelle reported warnings.
- Patch 10: Added devlink port support.
v2-v3:
- Used extack for error messages.
- As suggested reworked commit messages.
- Fixed sparse warning.
v1-v2:
-Fixed build warnings.
-Address review comments provided by "Kalesh Anakkur Purayil".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds documentation for creating and configuring rvu port representors
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implements tc offload support for rvu representors.
Usage example:
- Add tc rule to drop packets with vlan id 3 using port
representor(Rpf1vf0).
# tc filter add dev Rpf1vf0 protocol 802.1Q parent ffff: flower
vlan_id 3 vlan_ethtype ipv4 skip_sw action drop
- Redirect packets with vlan id 5 and IPv4 packets to eth1,
after stripping vlan header.
# tc filter add dev Rpf1vf0 ingress protocol 802.1Q flower vlan_id 5
vlan_ethtype ipv4 skip_sw action vlan pop action mirred ingress
redirect dev eth1
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the offload stat ndo by fetching the HW stats
of rx/tx queues attached to the representor.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register devlink port for the rvu representors.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hardware supports different types of MACs eg RPM, SDP, LBK.
LBK is for internal Tx->Rx HW loopback path. RPM and SDP MACs support
ingress/egress pkt IO on interfaces with different set of capabilities
like interface modes. At the time of netdev driver registration PF will
seek MAC related information from Admin function driver
'drivers/net/ethernet/marvell/octeontx2/af' and sets up ingress/egress
queues etc such that pkt IO on the channels of these different MACs is
possible. This patch add representors for SDP MAC.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds support to manage the mtu configuration for VF through representor.
On update of representor mtu a mbox notification is send
to VF to update its mtu.
This feature is implemented based on the "Network Function Representors"
kernel documentation.
"
Setting an MTU on the representor should cause that same MTU
to be reported to the representee.
"
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implements the below requirement mentioned
in the representors documentation.
"
The representee's link state is controlled through the
representor. Setting the representor administratively UP
or DOWN should cause carrier ON or OFF at the representee.
"
This patch enables
- Reflecting the link state of representor based on the VF state and
link state of VF based on representor.
- On VF interface up/down a notification is sent via mbox to representor
to update the link state.
eg: ip link set eth0 up/down will disable carrier on/off
of the corresponding representor(r0p1) interface.
- On representor interface up/down will cause the link state update of VF.
eg: ip link set r0p1 up/down will disable carrier on/off
of the corresponding representee(eth0) interface.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
