summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2020-03-27bnxt_en: Fix "fw.mgmt" and "fw.nsci" info via devlink info_get cbVasundhara Volam
Fix macro names to report fw.mgmt and fw.ncsi versions to match the devlink documentation. Example display after fixes: $ devlink dev info pci/0000:af:00.0 pci/0000:af:00.0: driver bnxt_en serial_number B0-26-28-FF-FE-25-84-20 versions: fixed: board.id BCM957454A4540 asic.id C454 asic.rev 1 running: fw 216.1.154.0 fw.psid 0.0.0 fw.mgmt 216.1.146.0 fw.mgmt.api 1.10.1 fw.ncsi 864.0.44.0 fw.roce 216.1.16.0 Fixes: 9599e036b161 ("bnxt_en: Add support for devlink info command") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27bnxt_en: Add partno to devlink info_get cbVasundhara Volam
Add part number info from the vital product data to info_get command via devlink tool. Update bnxt.rst documentation as well. Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27bnxt_en: Add fw.mgmt.api version to devlink info_get cb.Vasundhara Volam
Display the minimum version of firmware interface spec supported between driver and firmware. Also update bnxt.rst documentation file. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27devlink: Add macro for "fw.mgmt.api" to info_get cb.Vasundhara Volam
Add definition and documentation for the new generic info "fw.mgmt.api". This macro specifies the version of the software interfaces between driver and firmware. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26dt-binding: ti: am65x: document mcu cpsw nussGrygorii Strashko
Document device tree bindings for The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller - CPSW2G NUSS). The CPSW NUSS provides Ethernet packet communication for the device. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26dt-bindings: net: add marvell usb to mdio bindingsTobias Waldekranz
Describe how the USB to MDIO controller can optionally use device tree bindings to reference attached devices such as switches. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26ice: add a devlink region for dumping NVM contentsJacob Keller
Add a devlink region for exposing the device's Non Volatime Memory flash contents. Support the recently added .snapshot operation, enabling userspace to request a snapshot of the NVM contents via DEVLINK_CMD_REGION_NEW. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: implement DEVLINK_CMD_REGION_NEWJacob Keller
Implement support for the DEVLINK_CMD_REGION_NEW command for creating snapshots. This new command parallels the existing DEVLINK_CMD_REGION_DEL. In order for DEVLINK_CMD_REGION_NEW to work for a region, the new ".snapshot" operation must be implemented in the region's ops structure. The desired snapshot id must be provided. This helps avoid confusion on the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler. The requested id will be inserted into the xarray tracking the number of snapshots using each id. If this id is already used by another snapshot on any region, an error will be returned. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge tag 'zonefs-5.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fix from Damien Le Moal: "A single fix from me to correctly handle the size of read-only zone files" * tag 'zonefs-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonfs: Fix handling of read-only zones
2020-03-25zonfs: Fix handling of read-only zonesDamien Le Moal
The write pointer of zones in the read-only consition is defined as invalid by the SCSI ZBC and ATA ZAC specifications. It is thus not possible to determine the correct size of a read-only zone file on mount. Fix this by handling read-only zones in the same manner as offline zones by disabling all accesses to the zone (read and write) and initializing the inode size of the read-only zone to 0). For zones found to be in the read-only condition at runtime, only disable write access to the zone and keep the size of the zone file to its last updated value to allow the user to recover previously written data. Also fix zonefs documentation file to reflect this change. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
2020-03-24devlink: expand the devlink-info documentationJakub Kicinski
We are having multiple review cycles with all vendors trying to implement devlink-info. Let's expand the documentation with more information about what's implemented and motivation behind this interface in an attempt to make the implementations easier. Describe what each info section is supposed to contain, and make some references to other HW interfaces (PCI caps). Document how firmware management is expected to look, to make it clear how devlink-info and devlink-flash work in concert. Name some future work. v2: - improve wording v3: - improve wording Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24Merge tag 'wireless-drivers-next-2020-03-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.7 Second set of patches for v5.7. Lots of cleanup patches this time, but of course various new features as well fixes. When merging with wireless-drivers this pull request has a conflict in: drivers/net/wireless/intel/iwlwifi/pcie/drv.c To solve that just drop the changes from commit cf52c8a776d1 in wireless-drivers and take the hunk from wireless-drivers-next as is. The list of specific subsystem device IDs are not necessary after commit d6f2134a3831 (in wireless-drivers-next) anymore, the detection is based on other characteristics of the devices. Major changes: qtnfmac * support WPA3 SAE and OWE in AP mode ath10k * support for getting btcoex settings from Device Tree * support QCA9377 SDIO device ath11k * add HE rate accounting * add thermal sensor and cooling devices mt76 * MT7663 support for the MT7615 driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24Merge tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Late fixes in dmaengine for v5.6: - move .device_release missing log warning to debug - couple of maintainer entries for HiSilicon and IADX drivers - off-by-one fix for idxd driver - documentation warning fixes - TI k3 dma error handling fix" * tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()' MAINTAINERS: Add maintainer for HiSilicon DMA engine driver dmaengine: idxd: fix off by one on cdev dwq refcount MAINTAINERS: rectify the INTEL IADX DRIVER entry dmaengine: move .device_release missing log warning to debug level docs: dmaengine: provider.rst: get rid of some warnings
2020-03-21ice: add board identifier info to devlink .info_getJacob Keller
Export a unique board identifier using "board.id" for devlink's .info_get command. Obtain this by reading the NVM for the PBA identification string. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-03-21ice: add basic handler for devlink .info_getJacob Keller
The devlink .info_get callback allows the driver to report detailed version information. The following devlink versions are reported with this initial implementation: "fw.mgmt" -> The version of the firmware that controls PHY, link, etc "fw.mgmt.api" -> API version of interface exposed over the AdminQ "fw.mgmt.build" -> Unique build id of the source for the management fw "fw.undi" -> Version of the Option ROM containing the UEFI driver "fw.psid.api" -> Version of the NVM image format. "fw.bundle_id" -> Unique identifier for the combined flash image. "fw.app.name" -> The name of the active DDP package. "fw.app" -> The version of the active DDP package. With this, devlink dev info can report at least as much information as is reported by ETHTOOL_GDRVINFO. Compare the output from ethtool vs from devlink: $ ethtool -i ens785s0 driver: ice version: 0.8.1-k firmware-version: 0.80 0x80002ec0 1.2581.0 expansion-rom-version: bus-info: 0000:3b:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes $ devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial number 00-01-ab-ff-ff-ca-05-68 versions: running: fw.mgmt 2.1.7 fw.mgmt.api 1.5 fw.mgmt.build 0x305d955f fw.undi 1.2581.0 fw.psid.api 0.80 fw.bundle_id 0x80002ec0 fw.app.name ICE OS Default Package fw.app 1.3.1.0 More pieces of information can be displayed, each version is kept separate instead of munged together, and each version has an identifier which comes with associated documentation. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-03-21devlink: promote "fw.bundle_id" to a generic info versionJacob Keller
The nfp driver uses ``fw.bundle_id`` to represent a unique identifier of the entire firmware bundle. A future change is going to introduce a similar notion in the ice driver, so promote ``fw.bundle_id`` into a generic version now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-03-19Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-03-19 Here's the main bluetooth-next pull request for the 5.7 kernel. - Added wideband speech support to mgmt and the ability for HCI drivers to declare support for it. - Added initial support for L2CAP Enhanced Credit Based Mode - Fixed suspend handling for several use cases - Fixed Extended Advertising related issues - Added support for Realtek 8822CE device - Added DT bindings for QTI chip WCN3991 - Cleanups to replace zero-length arrays with flexible-array members - Several other smaller cleanups & fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge tag 'kbuild-fixes-v5.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix __uint128_t capability test in Kconfig when GCC that defaults to 32-bit is used to build the 64-bit kernel - suppress new noisy Clang warnings -Wpointer-to-enum-cast - move the namespace field in Module.symvers for the backward compatibility reason for the depmod tool - use available compression for initramdisk when INTRAMFS_SOURCE is defined, which was the original behavior - fix modpost to handle correct large section numbers when it refers to modversion CRCs and module namespaces - fix comments and documents * tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/kallsyms: fix wrong kallsyms_relative_base modpost: Get proper section index by get_secindex() instead of st_shndx initramfs: restore default compression behavior modpost: move the namespace field in Module.symvers last kbuild: Disable -Wpointer-to-enum-cast kbuild: doc: fix references to other documents int128: fix __uint128_t compiler test in Kconfig kconfig: introduce m32-flag and m64-flag kbuild: Fix inconsistent comment
2020-03-17Documentation: networking: stmmac: Mention new XLGMAC supportJose Abreu
Add the Enterprise MAC support to the list of supported IP versions and the newly added XLGMII interface support. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17modpost: move the namespace field in Module.symvers lastJessica Yu
In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module). In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now. Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow. Cc: stable@vger.kernel.org Fixes: cb9b55d21fe0 ("modpost: add support for symbol namespaces") Tested-by: Matthias Maennich <maennich@google.com> Reviewed-by: Matthias Maennich <maennich@google.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-16Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.7. Major changes: ath10k * support for getting btcoex settings from Device Tree * support QCA9377 SDIO device ath11k * add HE rate accounting * add thermal sensor and cooling devices
2020-03-15Merge tag 'irq-urgent-2020-03-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single commit to handle an erratum in Cavium ThunderX to prevent access to GIC registers which are broken in the implementation" * tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2
2020-03-15Merge tag 'irqchip-fixes-5.6-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Add workaround for Cavium/Marvell ThunderX unimplemented GIC registers
2020-03-14irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2Marc Zyngier
Despite the architecture spec requiring that reserved registers in the GIC distributor memory map are RES0 (and thus are not allowed to generate an exception), the Cavium ThunderX (aka TX1) SoC explodes as such: [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 128 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956 [ 0.000000] Hardware name: cavium,thunder-88xx (DT) [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 0.000000] pc : __raw_readl+0x0/0x8 [ 0.000000] lr : gic_init_bases+0x110/0x560 [ 0.000000] sp : ffff800011243d90 [ 0.000000] x29: ffff800011243d90 x28: 0000000000000000 [ 0.000000] x27: 0000000000000018 x26: 0000000000000002 [ 0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80 [ 0.000000] x23: 0000000000000000 x22: ffff010fdc322b68 [ 0.000000] x21: ffff800010a7a208 x20: 00000000009b0404 [ 0.000000] x19: ffff80001124dad0 x18: 0000000000000010 [ 0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af [ 0.000000] x15: ffffffffffffffff x14: ffff800011249908 [ 0.000000] x13: ffff800091243ae7 x12: ffff800011243af4 [ 0.000000] x11: ffff80001126e000 x10: ffff800011243a70 [ 0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828 [ 0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1 [ 0.000000] x5 : 0000000000000001 x4 : 0000000000000000 [ 0.000000] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c [ 0.000000] Call trace: [ 0.000000] __raw_readl+0x0/0x8 [ 0.000000] gic_of_init+0x188/0x224 [ 0.000000] of_irq_init+0x200/0x3cc [ 0.000000] irqchip_init+0x1c/0x40 [ 0.000000] init_IRQ+0x160/0x1d0 [ 0.000000] start_kernel+0x2ec/0x4b8 [ 0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000) when reading the GICv4.1 GICD_TYPER2 register, which is unexpected... Work around it by adding a new quirk for the following variants: ThunderX: CN88xx OCTEON TX: CN83xx, CN81xx OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx* and use this flag to avoid accessing GICD_TYPER2. Note that all reserved registers (including redistributors and ITS) are impacted by this erratum, but that only GICD_TYPER2 has to be worked around so far. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Robert Richter <rrichter@marvell.com> Tested-by: Mark Salter <msalter@redhat.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Robert Richter <rrichter@marvell.com> Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org
2020-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-03-13 The following pull-request contains BPF updates for your *net-next* tree. We've added 86 non-merge commits during the last 12 day(s) which contain a total of 107 files changed, 5771 insertions(+), 1700 deletions(-). The main changes are: 1) Add modify_return attach type which allows to attach to a function via BPF trampoline and is run after the fentry and before the fexit programs and can pass a return code to the original caller, from KP Singh. 2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher objects to be visible in /proc/kallsyms so they can be annotated in stack traces, from Jiri Olsa. 3) Extend BPF sockmap to allow for UDP next to existing TCP support in order in order to enable this for BPF based socket dispatch, from Lorenz Bauer. 4) Introduce a new bpftool 'prog profile' command which attaches to existing BPF programs via fentry and fexit hooks and reads out hardware counters during that period, from Song Liu. Example usage: bpftool prog profile id 337 duration 3 cycles instructions llc_misses 4228 run_cnt 3403698 cycles (84.08%) 3525294 instructions # 1.04 insn per cycle (84.05%) 13 llc_misses # 3.69 LLC misses per million isns (83.50%) 5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition of a new bpf_link abstraction to keep in particular BPF tracing programs attached even when the applicaion owning them exits, from Andrii Nakryiko. 6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering and which returns the PID as seen by the init namespace, from Carlos Neira. 7) Refactor of RISC-V JIT code to move out common pieces and addition of a new RV32G BPF JIT compiler, from Luke Nelson. 8) Add gso_size context member to __sk_buff in order to be able to know whether a given skb is GSO or not, from Willem de Bruijn. 9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output implementation but can be called from tracepoint programs, from Eelco Chaudron. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-13kbuild: doc: fix references to other documentsMasahiro Yamada
All the files in Documentation/kbuild/ were converted to reST. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-12Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "A couple of fixes for old crap in ->atomic_open() instances" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cifs_atomic_open(): fix double-put on late allocation failure gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
2020-03-12ethtool: add CHANNELS_NTF notificationMichal Kubecek
Send ETHTOOL_MSG_CHANNELS_NTF notification whenever channel counts of a network device are modified using ETHTOOL_MSG_CHANNELS_SET netlink message or ETHTOOL_SCHANNELS ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: set device channel counts with CHANNELS_SET requestMichal Kubecek
Implement CHANNELS_SET netlink request to set channel counts of a network device. These are traditionally set with ETHTOOL_SCHANNELS ioctl request. Like the ioctl implementation, the generic ethtool code checks if supplied values do not exceed driver defined limits; if they do, first offending attribute is reported using extack. Checks preventing removing channels used for RX indirection table or zerocopy AF_XDP socket are also implemented. Move ethtool_get_max_rxfh_channel() helper into common.c so that it can be used by both ioctl and netlink code. v2: - fix netdev reference leak in error path (found by Jakub Kicinsky) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: provide channel counts with CHANNELS_GET requestMichal Kubecek
Implement CHANNELS_GET request to get channel counts of a network device. These are traditionally available via ETHTOOL_GCHANNELS ioctl request. Omit attributes for channel types which are not supported by driver or device (zero reported for maximum). v2: (all suggested by Jakub Kicinski) - minor cleanup in channels_prepare_data() - more descriptive channels_reply_size() - omit attributes with zero max count Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: add RINGS_NTF notificationMichal Kubecek
Send ETHTOOL_MSG_RINGS_NTF notification whenever ring sizes of a network device are modified using ETHTOOL_MSG_RINGS_SET netlink message or ETHTOOL_SRINGPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: set device ring sizes with RINGS_SET requestMichal Kubecek
Implement RINGS_SET netlink request to set ring sizes of a network device. These are traditionally set with ETHTOOL_SRINGPARAM ioctl request. Like the ioctl implementation, the generic ethtool code checks if supplied values do not exceed driver defined limits; if they do, first offending attribute is reported using extack. v2: - fix netdev reference leak in error path (found by Jakub Kicinsky) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: provide ring sizes with RINGS_GET requestMichal Kubecek
Implement RINGS_GET request to get ring sizes of a network device. These are traditionally available via ETHTOOL_GRINGPARAM ioctl request. Omit attributes for ring types which are not supported by driver or device (zero reported for maximum). v2: (all suggested by Jakub Kicinski) - minor cleanup in rings_prepare_data() - more descriptive rings_reply_size() - omit attributes with zero max size Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: set device private flags with PRIVFLAGS_SET requestMichal Kubecek
Implement PRIVFLAGS_SET netlink request to set private flags of a network device. These are traditionally set with ETHTOOL_SPFLAGS ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: provide private flags with PRIVFLAGS_GET requestMichal Kubecek
Implement PRIVFLAGS_GET request to get private flags for a network device. These are traditionally available via ETHTOOL_GPFLAGS ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: add FEATURES_NTF notificationMichal Kubecek
Send ETHTOOL_MSG_FEATURES_NTF notification whenever network device features are modified using ETHTOOL_MSG_FEATURES_SET netlink message, ethtool ioctl request or any other way resulting in call to netdev_update_features() or netdev_change_features() Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: set netdev features with FEATURES_SET requestMichal Kubecek
Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12ethtool: provide netdev features with FEATURES_GET requestMichal Kubecek
Implement FEATURES_GET request to get network device features. These are traditionally available via ETHTOOL_GFEATURES ioctl request. v2: - style cleanup suggested by Jakub Kicinski Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12cifs_atomic_open(): fix double-put on late allocation failureAl Viro
several iterations of ->atomic_open() calling conventions ago, we used to need fput() if ->atomic_open() failed at some point after successful finish_open(). Now (since 2016) it's not needed - struct file carries enough state to make fput() work regardless of the point in struct file lifecycle and discarding it on failure exits in open() got unified. Unfortunately, I'd missed the fact that we had an instance of ->atomic_open() (cifs one) that used to need that fput(), as well as the stale comment in finish_open() demanding such late failure handling. Trivially fixed... Fixes: fe9ec8291fca "do_last(): take fput() on error after opening to out:" Cc: stable@kernel.org # v4.7+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-12tcp: bind(0) remove the SO_REUSEADDR restriction when ephemeral ports are ↵Kuniyuki Iwashima
exhausted. Commit aacd9289af8b82f5fb01bcdd53d0e3406d1333c7 ("tcp: bind() use stronger condition for bind_conflict") introduced a restriction to forbid to bind SO_REUSEADDR enabled sockets to the same (addr, port) tuple in order to assign ports dispersedly so that we can connect to the same remote host. The change results in accelerating port depletion so that we fail to bind sockets to the same local port even if we want to connect to the different remote hosts. You can reproduce this issue by following instructions below. 1. # sysctl -w net.ipv4.ip_local_port_range="32768 32768" 2. set SO_REUSEADDR to two sockets. 3. bind two sockets to (localhost, 0) and the latter fails. Therefore, when ephemeral ports are exhausted, bind(0) should fallback to the legacy behaviour to enable the SO_REUSEADDR option and make it possible to connect to different remote (addr, port) tuples. This patch allows us to bind SO_REUSEADDR enabled sockets to the same (addr, port) only when net.ipv4.ip_autobind_reuse is set 1 and all ephemeral ports are exhausted. This also allows connect() and listen() to share ports in the following way and may break some applications. So the ip_autobind_reuse is 0 by default and disables the feature. 1. setsockopt(sk1, SO_REUSEADDR) 2. setsockopt(sk2, SO_REUSEADDR) 3. bind(sk1, saddr, 0) 4. bind(sk2, saddr, 0) 5. connect(sk1, daddr) 6. listen(sk2) If it is set 1, we can fully utilize the 4-tuples, but we should use IP_BIND_ADDRESS_NO_PORT for bind()+connect() as possible. The notable thing is that if all sockets bound to the same port have both SO_REUSEADDR and SO_REUSEPORT enabled, we can bind sockets to an ephemeral port and also do listen(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12dt-bindings: soc: qcom: fix IPA bindingAlex Elder
The definitions for the "qcom,smem-states" and "qcom,smem-state-names" properties need to list their "$ref" under an "allOf" keyword. In addition, fix two problems in the example at the end: - Use #include for header files that define needed symbolic values - Terminate the line that includes the "ipa-shared" register space name with a comma rather than a semicolon Finally, update some white space in the example for better alignment. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09linux-next: DOC: RDS: Fix a typo in rds.txtMasanari Iida
This patch fix a spelling typo in rds.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08dt-bindings: soc: qcom: add IPA bindingsAlex Elder
Add the binding definitions for the "qcom,ipa" device tree node. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "We've been accruing these for a couple of weeks, so the batch is a bit bigger than usual. Largest delta is due to a led-bl driver that is added -- there was a miscommunication before the merge window and the driver didn't make it in. Due to this, the platforms needing it regressed. At this point, it seemed easier to add the new driver than unwind the changes. Besides that, there are a handful of various fixes: - AMD tee memory leak fix - A handful of fixlets for i.MX SCU communication - A few maintainers woke up and realized DEBUG_FS had been missing for a while, so a few updates of that. ... and the usual collection of smaller fixes to various platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits) ARM: socfpga_defconfig: Add back DEBUG_FS arm64: dts: socfpga: agilex: Fix gmac compatible ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED tee: amdtee: fix memory leak in amdtee_open_session() ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc ...
2020-03-08Merge tag 'driver-core-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs fixes from Greg KH: "Here are four small driver core / debugfs patches for 5.6-rc3: - debugfs api cleanup now that all debugfs_create_regset32() callers have been fixed up. This was waiting until after the -rc1 merge as these fixes came in through different trees - driver core sync state fixes based on reports of minor issues found in the feature All of these have been in linux-next with no reported issues" * tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Skip unnecessary work when device doesn't have sync_state() driver core: Add dev_has_sync_state() driver core: Call sync_state() even if supplier has no consumers debugfs: remove return value of debugfs_create_regset32()
2020-03-06dt-bindings: net: Add ipq806x mdio bindingsAnsuel Smith
Add documentations for ipq806x mdio driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06dt-bindings: net: FMan erratum A050385Madalin Bucur
FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 18:57:55 +0000