summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2024-12-06Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Nothing major, some left-overs from the recent merging window (MTE, coco) and some newly found issues like the ptrace() ones. - MTE/hugetlbfs: - Set VM_MTE_ALLOWED in the arch code and remove it from the core code for hugetlbfs mappings - Fix copy_highpage() warning when the source is a huge page but not MTE tagged, taking the wrong small page path - drivers/virt/coco: - Add the pKVM and Arm CCA drivers under the arm64 maintainership - Fix the pkvm driver to fall back to ioremap() (and warn) if the MMIO_GUARD hypercall fails - Keep the Arm CCA driver default 'n' rather than 'm' - A series of fixes for the arm64 ptrace() implementation, potentially leading to the kernel consuming uninitialised stack variables when PTRACE_SETREGSET is invoked with a length of 0 - Fix zone_dma_limit calculation when RAM starts below 4GB and ZONE_DMA is capped to this limit - Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a call to page_to_phys() (from patch_map()) which checks pfn_valid() before vmemmap has been set up - Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI ops when the kernel assumes 8-bit ASIDs but running under a hypervisor on a system that implements 16-bit ASIDs (found running Linux under Parallels on Apple M4) - ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it is using the same SMMU PMCG as HIP09 and suffers from the same errata - Add GCS to cpucap_is_possible(), missed in the recent merge" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS arm64: ptrace: fix partial SETREGSET for NT_ARM_POE arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL arm64: cpufeature: Add GCS to cpucap_is_possible() coco: virt: arm64: Do not enable cca guest driver by default arm64: mte: Fix copy_highpage() warning on hugetlb folios arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails arm64: patching: avoid early page_to_phys() arm64: mm: Fix zone_dma_limit calculation arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
2024-12-06Merge tag 'pmdomain-v6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fixes from Ulf Hansson: "Core: - Fix a couple of memory-leaks during genpd init/remove Providers: - imx: Adjust delay for gpcv2 to fix power up handshake - mediatek: Fix DT bindings by adding another nested power-domain layer" * tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: imx: gpcv2: Adjust delay after power up handshake pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails pmdomain: core: Add missing put_device() dt-bindings: power: mediatek: Add another nested power-domain layer
2024-12-05Merge tag 'net-6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and netfilter. Current release - regressions: - rtnetlink: fix double call of rtnl_link_get_net_ifla() - tcp: populate XPS related fields of timewait sockets - ethtool: fix access to uninitialized fields in set RXNFC command - selinux: use sk_to_full_sk() in selinux_ip_output() Current release - new code bugs: - net: make napi_hash_lock irq safe - eth: - bnxt_en: support header page pool in queue API - ice: fix NULL pointer dereference in switchdev Previous releases - regressions: - core: fix icmp host relookup triggering ip_rt_bug - ipv6: - avoid possible NULL deref in modify_prefix_route() - release expired exception dst cached in socket - smc: fix LGR and link use-after-free issue - hsr: avoid potential out-of-bound access in fill_frame_info() - can: hi311x: fix potential use-after-free - eth: ice: fix VLAN pruning in switchdev mode Previous releases - always broken: - netfilter: - ipset: hold module reference while requesting a module - nft_inner: incorrect percpu area handling under softirq - can: j1939: fix skb reference counting - eth: - mlxsw: use correct key block on Spectrum-4 - mlx5: fix memory leak in mlx5hws_definer_calc_layout" * tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) net :mana :Request a V2 response version for MANA_QUERY_GF_STAT net: avoid potential UAF in default_operstate() vsock/test: verify socket options after setting them vsock/test: fix parameter types in SO_VM_SOCKETS_* calls vsock/test: fix failures due to wrong SO_RCVLOWAT parameter net/mlx5e: Remove workaround to avoid syndrome for internal port net/mlx5e: SD, Use correct mdev to build channel param net/mlx5: E-Switch, Fix switching to switchdev mode in MPV net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled net/mlx5: HWS: Properly set bwc queue locks lock classes net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout bnxt_en: handle tpa_info in queue API implementation bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap() bnxt_en: refactor tpa_info alloc/free into helpers geneve: do not assume mac header is set in geneve_xmit_skb() mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4 ethtool: Fix wrong mod state in case of verbose and no_mask bitset ipmr: tune the ipmr_can_free_table() checks. netfilter: nft_set_hash: skip duplicated elements pending gc run netfilter: ipset: Hold module reference while requesting a module ...
2024-12-05Merge tag 'linux-watchdog-6.13-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add support for exynosautov920 SoC - Add support for Airoha EN7851 watchdog - Add support for MT6735 TOPRGU/WDT - Delete the cpu5wdt driver - Always print when registering watchdog fails - Several other small fixes and improvements * tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: rti: of: honor timeout-sec property watchdog: s3c2410_wdt: add support for exynosautov920 SoC dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings watchdog: mediatek: Add support for MT6735 TOPRGU/WDT watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property dt-bindings: watchdog: Document Qualcomm QCS8300 docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs" watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler watchdog: Switch back to struct platform_driver::remove() watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04 watchdog: da9063: Remove __maybe_unused notations watchdog: da9063: Do not use a global variable watchdog: Delete the cpu5wdt driver watchdog: Add support for Airoha EN7851 watchdog dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581 watchdog: sl28cpld_wdt: don't print out if registering watchdog fails watchdog: rza_wdt: don't print out if registering watchdog fails watchdog: rti_wdt: don't print out if registering watchdog fails ...
2024-12-05ACPI/IORT: Add PMCG platform information for HiSilicon HIP09AQinxin Xia
HiSilicon HIP09A platforms using the same SMMU PMCG with HIP09 and thus suffers the same erratum. List them in the PMCG platform information list without introducing a new SMMU PMCG Model. Update the silicon-errata.rst as well. Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com> Link: https://lore.kernel.org/r/20241205013331.1484017-1-xiaqinxin@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-12-03module: Convert default symbol namespace to string literalMasahiro Yamada
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(), leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion. This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid annoyance for the default namespace as well. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-03doc: module: revert misconversions for MODULE_IMPORT_NS()Masahiro Yamada
This reverts the misconversions introduced by commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal"). The affected descriptions refer to MODULE_IMPORT_NS() tags in general, rather than suggesting the use of the empty string ("") as the namespace. Fixes: cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-02dt-bindings: power: mediatek: Add another nested power-domain layerFei Shao
The MT8188 SoC has a more in-depth power-domain tree, and the CHECK_DTBS=y check could fail because the current MediaTek power dt-binding is insufficient to cover its CAM_SUBA and CAM_SUBB sub-domains. Add one more nested power-domain layer to pass the check. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Fei Shao <fshao@chromium.org> Message-ID: <20241001113052.3124869-2-fshao@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-12-01Merge tag 'irq_urgent_for_v6.13_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Move the ->select callback to the correct ops structure in irq-mvebu-sei to fix some Marvell Armada platforms - Add a workaround for Hisilicon ITS erratum 162100801 which can cause some virtual interrupts to get lost - More platform_driver::remove() conversion * tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Switch back to struct platform_driver::remove() irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
2024-12-01Merge tag 'x86_urgent_for_v6.13_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add a terminating zero end-element to the array describing AMD CPUs affected by erratum 1386 so that the matching loop actually terminates instead of going off into the weeds - Update the boot protocol documentation to mention the fact that the preferred address to load the kernel to is considered in the relocatable kernel case too - Flush the memory buffer containing the microcode patch after applying microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns - Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been disabled * tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Terminate the erratum_1386_microcode array x86/Documentation: Update algo in init_size description of boot protocol x86/microcode/AMD: Flush patch buffer mapping after application x86/mm: Carve out INVLPG inline asm for use by others x86/cpu: Fix PPIN initialization
2024-11-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more kvm updates from Paolo Bonzini: - ARM fixes - RISC-V Svade and Svadu (accessed and dirty bit) extension support for host and guest * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM dt-bindings: riscv: Add Svade and Svadu Entries RISC-V: Add Svade and Svadu Extensions Support KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition KVM: arm64: vgic: Make vgic_get_irq() more robust KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
2024-11-30docs: net: bareudp: fix spelling and grammar mistakesVyshnav Ajith
The BareUDP documentation had several grammar and spelling mistakes, making it harder to read. This patch fixes those errors to improve clarity and readability for developers. Signed-off-by: Vyshnav Ajith <puthen1977@gmail.com> Link: https://patch.msgid.link/20241121224827.12293-1-puthen1977@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-30Merge tag 'kbuild-v6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add generic support for built-in boot DTB files - Enable TAB cycling for dialog buttons in nconfig - Fix issues in streamline_config.pl - Refactor Kconfig - Add support for Clang's AutoFDO (Automatic Feedback-Directed Optimization) - Add support for Clang's Propeller, a profile-guided optimization. - Change the working directory to the external module directory for M= builds - Support building external modules in a separate output directory - Enable objtool for *.mod.o and additional kernel objects - Use lz4 instead of deprecated lz4c - Work around a performance issue with "git describe" - Refactor modpost * tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits) kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms gitignore: Don't ignore 'tags' directory kbuild: add dependency from vmlinux to resolve_btfids modpost: replace tdb_hash() with hash_str() kbuild: deb-pkg: add python3:native to build dependency genksyms: reduce indentation in export_symbol() modpost: improve error messages in device_id_check() modpost: rename alias symbol for MODULE_DEVICE_TABLE() modpost: rename variables in handle_moddevtable() modpost: move strstarts() to modpost.h modpost: convert do_usb_table() to a generic handler modpost: convert do_of_table() to a generic handler modpost: convert do_pnp_device_entry() to a generic handler modpost: convert do_pnp_card_entries() to a generic handler modpost: call module_alias_printf() from all do_*_entry() functions modpost: pass (struct module *) to do_*_entry() functions modpost: remove DEF_FIELD_ADDR_VAR() macro modpost: deduplicate MODULE_ALIAS() for all drivers modpost: introduce module_alias_printf() helper modpost: remove unnecessary check in do_acpi_entry() ...
2024-11-30Merge tag 'rtc-6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Driver updates: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver" * tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits) rtc: ab-eoz9: don't fail temperature reads on undervoltage notification rtc: rzn1: reduce register access rtc: rzn1: drop superfluous wday calculation m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly rtc: m48t59: Use platform_data struct for year offset value rtc: ab-eoz9: fix abeoz9_rtc_read_alarm rtc: rv3028: fix RV3028_TS_COUNT type rtc: rzn1: update Michel's email rtc: rzn1: fix BCD to rtc_time conversion errors rtc: amlogic-a4: fix compile error rtc: amlogic-a4: drop error messages MAINTAINERS: Add an entry for Amlogic RTC driver rtc: support for the Amlogic on-chip RTC dt-bindings: rtc: Add Amlogic A4 and A5 RTC rtc: add driver for Marvell 88PM886 PMIC RTC rtc: check if __rtc_read_time was successful in rtc_timer_do_work() rtc: pcf8563: Switch to regmap rtc: pcf8563: Sort headers alphabetically rtc: abx80x: Fix WDT bit position of the status register ...
2024-11-30Merge tag 'tty-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted" * tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: amba-pl011: fix build regression dt-bindings: serial: Add a new compatible string for ums9632 serial: sprd: Add support for sc9632 tty/serial/altera_uart: unwrap error log string tty/serial/altera_jtaguart: unwrap error log string serial: amba-pl011: Fix RX stall when DMA is used tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler serial: 8250_fintek: Add support for F81216E serial: sh-sci: Clean sci_ports[0] after at earlycon exit tty: atmel_serial: Fix typo retreives to retrieves tty: atmel_serial: Use devm_platform_ioremap_resource() serial: 8250: omap: Move pm_runtime_get_sync tty: serial: samsung: Add Exynos8895 compatible dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible serial: 8250_dw: Add Sophgo SG2044 quirk dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry. altera_jtaguart: Use dev_err() to report error attaching IRQ altera_uart: Use dev_err() to report error attaching IRQ handler ...
2024-11-29Merge tag 'sound-fix-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes. Majority of changes are device-specific fixes and quirks, while there are a few core fixes to address regressions and corner cases spotted by fuzzers. - Fix of spinlock range that wrongly covered kvfree() call in rawmidi - Fix potential NULL dereference at PCM mmap - Fix incorrectly advertised MIDI 2.0 UMP Function Block info - Various ASoC AMD quirks and fixes - ASoC SOF Intel, Mediatek, HDMI-codec fixes - A few more quirks and TAS2781 codec fix for HD-audio - A couple of fixes for USB-audio for malicious USB descriptors" * tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ALSA: hda: improve bass speaker support for ASUS Zenbook UM5606WA ALSA: hda/realtek: Apply quirk for Medion E15433 ASoC: amd: yc: Add a quirk for microfone on Lenovo ThinkPad P14s Gen 5 21MES00B00 ASoC: SOF: ipc3-topology: Convert the topology pin index to ALH dai index ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry ALSA: ump: Fix evaluation of MIDI 1.0 FB info ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() ALSA: hda: Show the codec quirk info at probing ALSA: asihpi: Remove unused variable ALSA: hda/realtek: Set PCBeep to default value for ALC274 ALSA: hda/tas2781: Add speaker id check for ASUS projects ALSA: hda/realtek: Update ALC225 depop procedure ALSA: hda/realtek: Enable speaker pins for Medion E15443 platform ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook X G1i ALSA: usb-audio: Fix out of bounds reads when finding clock sources ALSA: rawmidi: Fix kvfree() call in spinlock ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max ASoC: amd: yc: Add quirk for microphone on Lenovo Thinkpad T14s Gen 6 21M1CTO1WW ASoC: doc: dapm: Add location information for dapm-graph tool ...
2024-11-29Merge tag 'char-misc-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO/whatever driver subsystem updates from Greg KH: "Here is the 'big and hairy' char/misc/iio and other small driver subsystem updates for 6.13-rc1. Loads of things in here, and even a fun merge conflict! - rust misc driver bindings and other rust changes to make misc drivers actually possible. I think this is the tipping point, expect to see way more rust drivers going forward now that these bindings are present. Next merge window hopefully we will have pci and platform drivers working, which will fully enable almost all driver subsystems to start accepting (or at least getting) rust drivers. This is the end result of a lot of work from a lot of people, congrats to all of them for getting this far, you've proved many of us wrong in the best way possible, working code :) - IIO driver updates, too many to list individually, that subsystem keeps growing and growing... - Interconnect driver updates - nvmem driver updates - pwm driver updates - platform_driver::remove() fixups, loads of them - counter driver updates - misc driver updates (keba?) - binder driver updates and fixes - loads of other small char/misc/etc driver updates and additions, full details in the shortlog. All of these have been in linux-next for a while, with no other reported issues other than that merge conflict" * tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits) mei: vsc: Fix typo "maintstepping" -> "mainstepping" firmware: Switch back to struct platform_driver::remove() misc: isl29020: Fix the wrong format specifier scripts/tags.sh: Don't tag usages of DEFINE_MUTEX fpga: Switch back to struct platform_driver::remove() mei: vsc: Improve error logging in vsc_identify_silicon() mei: vsc: Do not re-enable interrupt from vsc_tp_reset() dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188 spmi: pmic-arb: fix return path in for_each_available_child_of_node() iio: Move __private marking before struct element priv in struct iio_dev docs: iio: ad7380: add adaq4370-4 and adaq4380-4 iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4 iio: adc: ad7380: use local dev variable to shorten long lines iio: adc: ad7380: fix oversampling formula dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian misc: atmel-ssc: Use of_property_present() for non-boolean properties misc: keba: Add hardware dependency ...
2024-11-29Merge tag 'driver-core-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of driver core changes for 6.13-rc1. Nothing major for this merge cycle, except for the two simple merge conflicts are here just to make life interesting. Included in here are: - sysfs core changes and preparations for more sysfs api cleanups that can come through all driver trees after -rc1 is out - fw_devlink fixes based on many reports and debugging sessions - list_for_each_reverse() removal, no one was using it! - last-minute seq_printf() format string bug found and fixed in many drivers all at once. - minor bugfixes and changes full details in the shortlog" * tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits) Fix a potential abuse of seq_printf() format string in drivers cpu: Remove spurious NULL in attribute_group definition s390/con3215: Remove spurious NULL in attribute_group definition perf: arm-ni: Remove spurious NULL in attribute_group definition driver core: Constify bin_attribute definitions sysfs: attribute_group: allow registration of const bin_attribute firmware_loader: Fix possible resource leak in fw_log_firmware_info() drivers: core: fw_devlink: Fix excess parameter description in docstring driver core: class: Correct WARN() message in APIs class_(for_each|find)_device() cacheinfo: Use of_property_present() for non-boolean properties cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap() drivers: core: fw_devlink: Make the error message a bit more useful phy: tegra: xusb: Set fwnode for xusb port devices drm: display: Set fwnode for aux bus devices driver core: fw_devlink: Stop trying to optimize cycle detection logic driver core: Constify attribute arguments of binary attributes sysfs: bin_attribute: add const read/write callback variants sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR() sysfs: treewide: constify attribute callback of bin_attribute::llseek() sysfs: treewide: constify attribute callback of bin_attribute::mmap() ...
2024-11-29Merge tag 'usb-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ...
2024-11-29Merge tag 'apparmor-pr-2024-11-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "Features: - extend next/check table to add support for 2^24 states to the state machine. - rework capability audit cache to use broader cred information instead of just the profile. Also add a time stamp so old entries can be aged out of the cache. Bug Fixes: - fix 'Do simple duplicate message elimination' to clear previous state when updating in capability audit cache - Fix memory leak for aa_unpack_strdup() - properly handle cx/px lookup failure when in complain mode - allocate xmatch for nullpdb inside aa_alloc_null fixing a NULL ptr deref of tracking profiles in when in complain mode Cleanups: - Remove everything being reported as deadcode - replace misleading 'scrubbing environment' phrase in debug print - Remove unnecessary NULL check before kvfree() - clean up duplicated parts of handle_onexec() - Use IS_ERR_OR_NULL() helper function - move new_profile declaration to top of block instead immediately after label to remove C23 extension warning Documentation: - add comment to document capability.c:profile_capable ad ptr parameter can not be NULL - add comment to document first entry is in packed perms struct is reserved for future planned expansion. - Update LSM/apparmor.rst add blurb for DEFAULT_SECURITY_APPARMOR" * tag 'apparmor-pr-2024-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: lift new_profile declaration to remove C23 extension warning apparmor: replace misleading 'scrubbing environment' phrase in debug print parser: drop dead code for XXX_comb macros apparmor: Remove unused parameter L1 in macro next_comb Docs: Update LSM/apparmor.rst apparmor: audit_cap dedup based on subj_cred instead of profile apparmor: add a cache entry expiration time aging out capability audit cache apparmor: document capability.c:profile_capable ad ptr not being NULL apparmor: fix 'Do simple duplicate message elimination' apparmor: document first entry is in packed perms struct is reserved apparmor: test: Fix memory leak for aa_unpack_strdup() apparmor: Remove deadcode apparmor: Remove unnecessary NULL check before kvfree() apparmor: domain: clean up duplicated parts of handle_onexec() apparmor: Use IS_ERR_OR_NULL() helper function apparmor: add support for 2^24 states to the dfa state machine. apparmor: properly handle cx/px lookup failure for complain apparmor: allocate xmatch for nullpdb inside aa_alloc_null
2024-11-29Merge tag 'sparc-for-6.13-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc Pull sparc updates from Andreas Larsson: - Make sparc64 compilable with clang - Replace one-element array with flexible array member * tag 'sparc-for-6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc: sparc/vdso: Add helper function for 64-bit right shift on 32-bit target sparc: Replace one-element array with flexible array member sparc/build: Add SPARC target flags for compiling with clang sparc/build: Put usage of -fcall-used* flags behind cc-option
2024-11-29Merge tag 'powerpc-6.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - Fix htmldocs errors in sysfs-bus-event_source-devices-vpa-pmu - Fix warning due to missing #size-cells on powermac Thanks to Michael Ellerman, Yang Li, Rob Herring, and Stephen Rothwell. * tag 'powerpc-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/prom_init: Fixup missing powermac #size-cells docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Fix htmldocs errors powerpc/machdep: Remove duplicated include in svm.c
2024-11-28Merge tag 'trace-v6.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull more tracing updates from Steven Rostedt: - Add trace flag for NEED_RESCHED_LAZY Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of the common_flags. This will now show when the NEED_RESCHED_LAZY flag is set that is used for debugging latency issues in the kernel via a trace. - Remove leftover "__idx" variable when SRCU was removed from the tracepoint code - Add rcu_tasks_trace guard To add a guard() around the tracepoint code, a rcu_tasks_trace guard needs to be created first. - Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly The DO_TRACE() macro has conditional locking depending on what was passed into the macro parameters. As the guts of the macro has been moved to __DO_TRACE_CALL() to handle static call logic, there's no reason to keep the __DO_TRACE() macro around. It is better to just do the locking in place without the conditionals and call __DO_TRACE_CALL() from those locations. The "cond" passed in can also be moved out of that macro. This simplifies the code. - Remove the "cond" from the system call tracepoint macros The "cond" variable was added to allow some tracepoints to check a condition within the static_branch (jump/nop) logic. The system calls do not need this. Removing it simplifies the code. - Replace scoped_guard() with just guard() in the tracepoint logic guard() works just as well as scoped_guard() in the tracepoint logic and the scoped_guard() causes some issues. * tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Use guard() rather than scoped_guard() tracing: Remove cond argument from __DECLARE_TRACE_SYSCALL tracing: Remove conditional locking from __DO_TRACE() rcupdate_trace: Define rcu_tasks_trace lock guard tracing: Remove __idx variable from __DO_TRACE tracing: Move it_func[0] comment to the relevant context tracing: Record task flag NEED_RESCHED_LAZY.
2024-11-28Merge tag 'net-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth. Current release - regressions: - rtnetlink: fix rtnl_dump_ifinfo() error path - bluetooth: remove the redundant sco_conn_put Previous releases - regressions: - netlink: fix false positive warning in extack during dumps - sched: sch_fq: don't follow the fast path if Tx is behind now - ipv6: delete temporary address if mngtmpaddr is removed or unmanaged - tcp: fix use-after-free of nreq in reqsk_timer_handler(). - bluetooth: fix slab-use-after-free Read in set_powered_sync - l2tp: fix warning in l2tp_exit_net found - eth: - bnxt_en: fix receive ring space parameters when XDP is active - lan78xx: fix double free issue with interrupt buffer allocation - tg3: set coherent DMA mask bits to 31 for BCM57766 chipsets Previous releases - always broken: - ipmr: fix tables suspicious RCU usage - iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() - eth: - octeontx2-af: fix low network performance - stmmac: dwmac-socfpga: set RX watchdog interrupt as broken - rtase: correct the speed for RTL907XD-V1 Misc: - some documentation fixup" * tag 'net-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) ipmr: fix build with clang and DEBUG_NET disabled. Documentation: tls_offload: fix typos and grammar Fix spelling mistake ipmr: fix tables suspicious RCU usage ip6mr: fix tables suspicious RCU usage ipmr: add debug check for mr table cleanup selftests: rds: move test.py to TEST_FILES net_sched: sch_fq: don't follow the fast path if Tx is behind now tcp: Fix use-after-free of nreq in reqsk_timer_handler(). net: phy: fix phy_ethtool_set_eee() incorrectly enabling LPI net: Comment copy_from_sockptr() explaining its behaviour rxrpc: Improve setsockopt() handling of malformed user input llc: Improve setsockopt() handling of malformed user input Bluetooth: SCO: remove the redundant sco_conn_put Bluetooth: MGMT: Fix possible deadlocks Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync bnxt_en: Unregister PTP during PCI shutdown and suspend bnxt_en: Refactor bnxt_ptp_init() bnxt_en: Fix receive ring space parameters when XDP is active bnxt_en: Fix queue start to update vnic RSS table ...
2024-11-28Merge tag 'regulator-fix-v6.13-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes that came in during the merge window, plus documetation of a new device ID for the Qualcomm LABIBB driver. There's a core fix for the rarely used current constraints and a fix for the Qualcomm RPMH driver which had described only one of the two voltage ranges that the hardware could control, creating a potential incompatibility with the configuration left by firmware" * tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Ignore unset max_uA constraints in current limit check dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator regulator: qcom-rpmh: Update ranges for FTSMPS525
2024-11-28Merge tag 'for-v6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - replace power_supply_register_no_ws() with power_supply_register() and a new "no_wakeup_source" field in struct power_supply_config - constify battery info tables in the core and all drivers - switch back to remove callback for all platform drivers - allow power_supply_put() to be called from atomic context - mark attribute arrays read-only after init Power-supply drivers: - new driver for TWL6030 and TWL6032 - rk817: improve battery capacity calibration - misc small cleanups and fixes" * tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits) power: reset: ep93xx: add AUXILIARY_BUS dependency dt-bindings: power: reset: Convert mode-.* properties to array power: supply: sc27xx: Fix battery detect GPIO probe dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio reset: keystone-reset: remove unused macros power: supply: axp20x_battery: Use scaled iio_read_channel power: supply: axp20x_usb_power: Use scaled iio_read_channel power: supply: generic-adc-battery: change my gmail power: supply: pmu_battery: Set power supply type to BATTERY power: Switch back to struct platform_driver::remove() power: supply: hwmon: move interface to private header power: supply: rk817: Update battery capacity calibration power: supply: rk817: stop updating info in suspend power: supply: rt9471: Use IC status regfield to report real charger status power: supply: rt9471: Fix wrong WDT function regfield declaration dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example power: supply: core: mark attribute arrays as ro_after_init power: supply: core: unexport power_supply_property_is_writeable() power: supply: core: use device mutex wrappers power: supply: bq27xxx: Fix registers of bq27426 ...
2024-11-28Merge tag 'asoc-fix-v6.13-merge-window' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.13 A pile of driver specific quirks and fixes that came in since the merge window. One of the AMD fixes is a bit broken for some systems, I'm expecting an incremental change to fix that but it seems better overall to merge the rest of the fixes. There's also one small documentation update that seemed sensible to apply now, pointing to the dapm-graph tool.
2024-11-28Documentation: tls_offload: fix typos and grammarLeo Stone
Fix typos and grammar where it improves readability. Signed-off-by: Leo Stone <leocstone@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://patch.msgid.link/20241124230002.56058-1-leocstone@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-28Fix spelling mistakeVyshnav Ajith
Changed from reequires to require. A minute typo. Signed-off-by: Vyshnav Ajith <puthen1977@gmail.com> Link: https://patch.msgid.link/20241121221852.10754-1-puthen1977@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-28kbuild: allow to start building external modules in any directoryMasahiro Yamada
Unless an explicit O= option is provided, external module builds must start from the kernel directory. This can be achieved by using the -C option: $ make -C /path/to/kernel M=/path/to/external/module This commit allows starting external module builds from any directory, so you can also do the following: $ make -f /path/to/kernel/Makefile M=/path/to/external/module The key difference is that the -C option changes the working directory and parses the Makefile located there, while the -f option only specifies the Makefile to use. As shown in the examples in Documentation/kbuild/modules.rst, external modules usually have a wrapper Makefile that allows you to build them without specifying any make arguments. The Makefile typically contains a rule as follows: KDIR ?= /path/to/kernel default: $(MAKE) -C $(KDIR) M=$(CURDIR) $(MAKECMDGOALS) The log will appear as follows: $ make make -C /path/to/kernel M=/path/to/external/module make[1]: Entering directory '/path/to/kernel' make[2]: Entering directory '/path/to/external/module' CC [M] helloworld.o MODPOST Module.symvers CC [M] helloworld.mod.o CC [M] .module-common.o LD [M] helloworld.ko make[2]: Leaving directory '/path/to/external/module' make[1]: Leaving directory '/path/to/kernel' This changes the working directory twice because the -C option first switches to the kernel directory, and then Kbuild internally recurses back to the external module directory. With this commit, the wrapper Makefile can directly include the kernel Makefile: KDIR ?= /path/to/kernel export KBUILD_EXTMOD := $(realpath $(dir $(lastword $(MAKEFILE_LIST)))) include $(KDIR)/Makefile This avoids unnecessary sub-make invocations: $ make CC [M] helloworld.o MODPOST Module.symvers CC [M] helloworld.mod.o CC [M] .module-common.o LD [M] helloworld.ko Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-11-28kbuild: support building external modules in a separate build directoryMasahiro Yamada
There has been a long-standing request to support building external modules in a separate build directory. This commit introduces a new environment variable, KBUILD_EXTMOD_OUTPUT, and its shorthand Make variable, MO. A simple usage: $ make -C <kernel-dir> M=<module-src-dir> MO=<module-build-dir> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-11-28kbuild: change working directory to external module directory with M=Masahiro Yamada
Currently, Kbuild always operates in the output directory of the kernel, even when building external modules. This increases the risk of external module Makefiles attempting to write to the kernel directory. This commit switches the working directory to the external module directory, allowing the removal of the $(KBUILD_EXTMOD)/ prefix from some build artifacts. The command for building external modules maintains backward compatibility, but Makefiles that rely on working in the kernel directory may break. In such cases, $(objtree) and $(srctree) should be used to refer to the output and source directories of the kernel. The appearance of the build log will change as follows: [Before] $ make -C /path/to/my/linux M=/path/to/my/externel/module make: Entering directory '/path/to/my/linux' CC [M] /path/to/my/externel/module/helloworld.o MODPOST /path/to/my/externel/module/Module.symvers CC [M] /path/to/my/externel/module/helloworld.mod.o CC [M] /path/to/my/externel/module/.module-common.o LD [M] /path/to/my/externel/module/helloworld.ko make: Leaving directory '/path/to/my/linux' [After] $ make -C /path/to/my/linux M=/path/to/my/externel/module make: Entering directory '/path/to/my/linux' make[1]: Entering directory '/path/to/my/externel/module' CC [M] helloworld.o MODPOST Module.symvers CC [M] helloworld.mod.o CC [M] .module-common.o LD [M] helloworld.ko make[1]: Leaving directory '/path/to/my/externel/module' make: Leaving directory '/path/to/my/linux' Printing "Entering directory" twice is cumbersome. This will be addressed later. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2024-11-27Merge tag 'pm-6.13-rc1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull morepower management updates from Rafael Wysocki: "These update the OPP (Operating Performance Points) DT bindings for ti-cpu (Dhruva Gole) and remove unused declarations from the OPP header file (Zhang Zekun)" * tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw OPP: Remove unused declarations in header file
2024-11-27Merge tag 'soundwire-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - structure optimization of few bus structures and header updates - support for 2.0 disco spec - amd driver updates for acp revision, refactoring code and support for acp6.3 - soft reset support for cadence driver * tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits) soundwire: Minor formatting fixups in sdw.h header soundwire: Update the includes on the sdw.h header soundwire: cadence: clear MCP BLOCK_WAKEUP in init soundwire: cadence: add soft-reset on startup soundwire: intel_auxdevice: add kernel parameter for mclk divider soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property soundwire: mipi-disco: add new properties from 2.0 spec soundwire: mipi-disco: add comment on DP0-supported property soundwire: mipi-disco: add support for peripheral channelprepare timeout soundwire: mipi_disco: add support for clock-scales property soundwire: mipi-disco: add error handling for property array read soundwire: mipi-disco: remove DPn audio-modes soundwire: optimize sdw_dpn_prop soundwire: optimize sdw_dp0_prop soundwire: optimize sdw_slave_prop soundwire: optimize sdw_bus structure soundwire: optimize sdw_master_prop soundwire: optimize sdw_stream_runtime memory layout soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers soundwire: Correct some typos in comments ...
2024-11-27Merge tag 'phy-for-6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hardware support: - ST STM32MP25 combophy support - Sparx5 support for lan969x serdes and updates to driver to support this - NXP PTN3222 eUSB2 to USB2 redriver - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2 support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP UFS PHY support and SA8775P eDP PHY support - Rockchip rk3576 usbdp and rk3576 usb2 phy support - Binding for Microchip ATA6561 can phy Updates: - Freescale driver updates from hdmi support - Conversion of rockchip rk3228 hdmi phy binding to yaml - Broadcom usb2-phy deprecated support dropped and USB init array update for BCM4908 - TI USXGMII mode support in J7200 - Switch back to platform_driver::remove() subsystem update" * tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits) phy: qcom: qmp: Fix lecacy-legacy typo phy: lan969x-serdes: add support for lan969x serdes driver dt-bindings: phy: sparx5: document lan969x phy: sparx5-serdes: add support for branching on chip type phy: sparx5-serdes: add indirection layer to register macros phy: sparx5-serdes: add function for getting the CMU index phy: sparx5-serdes: add ops to match data phy: sparx5-serdes: add constant for the number of CMU's phy: sparx5-serdes: add constants to match data phy: sparx5-serdes: add support for private match data phy: bcm-ns-usb2: drop support for old binding variant dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300 dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561 phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll() phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l() phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out() phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL ...
2024-11-27Merge tag 'dmaengine-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New hardware support: - Qualcomm SAR2130P GPI dma support - Sifive PIC64GX pdma support - Rcar r7s72100 support and associated updates Updates: - STM32 DMA3 updates for packing/unpacking mode and prevention of additional xfers - Simplification of devm_acpi_dma_controller_register() and associate cleanup including headers - loongson prefix renames - Switch back to platform_driver::remove() subsystem update" * tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2 dt-bindings: dma: sifive pdma: Add PIC64GX to compatibles dmaengine: fix typo in the comment dmaengine: stm32-dma3: clamp AXI burst using match data dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration dt-bindings: dma: stm32-dma3: prevent additional transfers dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver dt-bindings: dma: qcom,gpi: Add SAR2130P compatible dmaengine: Switch back to struct platform_driver::remove() dmaengine: ep93xx: Fix unsigned compared against 0 dmaengine: acpi: Clean up headers dmaengine: acpi: Simplify devm_acpi_dma_controller_register() dmaengine: acpi: Drop unused devm_acpi_dma_controller_free() dmaengine: sh: rz-dmac: add r7s72100 support dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
2024-11-27Merge tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Constify an unmodified structure used in linking vfio and kvm (Christophe JAILLET) - Add ID for an additional hardware SKU supported by the nvgrace-gpu vfio-pci variant driver (Ankit Agrawal) - Fix incorrect signed cast in QAT vfio-pci variant driver, negating test in check_add_overflow(), though still caught by later tests (Giovanni Cabiddu) - Additional debugfs attributes exposed in hisi_acc vfio-pci variant driver for migration debugging (Longfang Liu) - Migration support is added to the virtio vfio-pci variant driver, becoming the primary feature of the driver while retaining emulation of virtio legacy support as a secondary option (Yishai Hadas) - Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered through reviews of the virtio variant driver (Yishai Hadas) - Fix an unlikely issue where a PCI device exposed to userspace with an unknown capability at the base of the extended capability chain can overflow an array index (Avihai Horon) * tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio: vfio/pci: Properly hide first-in-list PCIe extended capability vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data() vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages() vfio/virtio: Enable live migration once VIRTIO_PCI was configured vfio/virtio: Add PRE_COPY support for live migration vfio/virtio: Add support for the basic live migration functionality virtio-pci: Introduce APIs to execute device parts admin commands virtio: Manage device and driver capabilities via the admin commands virtio: Extend the admin command to include the result size virtio_pci: Introduce device parts access commands Documentation: add debugfs description for hisi migration hisi_acc_vfio_pci: register debugfs for hisilicon migration driver hisi_acc_vfio_pci: create subfunction for data reading hisi_acc_vfio_pci: extract public functions for container_of vfio/qat: fix overflow check in qat_vf_resume_write() vfio/nvgrace-gpu: Add a new GH200 SKU to the devid table kvm/vfio: Constify struct kvm_device_ops
2024-11-27Merge tag 'riscv-for-linus-6.13-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-v updates from Palmer Dabbelt: - Support for pointer masking in userspace - Support for probing vector misaligned access performance - Support for qspinlock on systems with Zacas and Zabha * tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) RISC-V: Remove unnecessary include from compat.h riscv: Fix default misaligned access trap riscv: Add qspinlock support dt-bindings: riscv: Add Ziccrse ISA extension description riscv: Add ISA extension parsing for Ziccrse asm-generic: ticket-lock: Add separate ticket-lock.h asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock riscv: Implement xchg8/16() using Zabha riscv: Implement arch_cmpxchg128() using Zacas riscv: Improve zacas fully-ordered cmpxchg() riscv: Implement cmpxchg8/16() using Zabha dt-bindings: riscv: Add Zabha ISA extension description riscv: Implement cmpxchg32/64() using Zacas riscv: Do not fail to build on byte/halfword operations with Zawrs riscv: Move cpufeature.h macros into their own header KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests riscv: hwprobe: Export the Supm ISA extension riscv: selftests: Add a pointer masking test riscv: Allow ptrace control of the tagged address ABI ...
2024-11-27Merge branch 'pm-opp'Rafael J. Wysocki
Merge OPP (Operating Performance Points) changes for 6.13-rc1: - Describe opp-supported-hw property for ti-cpu (Dhruva Gole). - Remove unused declarations from the OPP header file (Zhang Zekun). * pm-opp: dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw OPP: Remove unused declarations in header file
2024-11-27Merge tag 'kvm-riscv-6.13-2' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 6.13 part #2 - Svade and Svadu extension support for Host and Guest/VM
2024-11-27Merge tag 'riscv-for-linus-6.13-mw1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into HEAD RISC-V Paches for the 6.13 Merge Window, Part 1 * Support for pointer masking in userspace, * Support for probing vector misaligned access performance. * Support for qspinlock on systems with Zacas and Zabha.
2024-11-27Merge tag 'vfs-6.13-rc1.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Fix a few iomap bugs - Fix a wrong argument in backing file callback - Fix security mount option retrieval in statmount() - Cleanup how statmount() handles unescaped options - Add a missing inode_owner_or_capable() check for setting write hints - Clear the return value in read_kcore_iter() after a successful iov_iter_zero() - Fix a mount_setattr() selftest - Fix function signature in mount api documentation - Remove duplicate include header in the fscache code * tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs/backing_file: fix wrong argument in callback fs_parser: update mount_api doc to match function signature fs: require inode_owner_or_capable for F_SET_RW_HINT fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful iov_iter_zero statmount: fix security option retrieval statmount: clean up unescaped option handling fscache: Remove duplicate included header iomap: elide flush from partial eof zero range iomap: lift zeroed mapping handling into iomap_zero_range() iomap: reset per-iter state on non-error iter advances iomap: warn on zero range of a post-eof folio selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels
2024-11-27docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Fix htmldocs errorsMichael Ellerman
Fix errors during `make htmldocs`, eg: Documentation/ABI/testing/sysfs-bus-event_source-devices-vpa-pmu:2: ERROR: Unexpected indentation. Fixes: 4ae0b32ecee7 ("docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20241120171302.2053439c@canb.auug.org.au/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241124103006.2236073-1-mpe@ellerman.id.au
2024-11-26Docs: Update LSM/apparmor.rstSiddharth Menon
After the deprecation of CONFIG_DEFAULT_SECURITY, it is no longer used to enable and configure AppArmor. Since kernel 5.0, `CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE` is not used either. Instead, the CONFIG_LSM parameter manages the order and selection of LSMs. Signed-off-by: Siddharth Menon <simeddon@gmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com>
2024-11-26Merge tag 'rproc-v6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "Make Qualcomm TrustZone Peripherial Authentication Service-remoteproc identifier/name human friendly. Add audio DSP support for the Qualcomm SAR2130P. Ensure IMEM access in the Qualcomm modem remoteproc driver is performed prior to the firmware enabling the XPU and locking us out. Improve error handling, error logging, compile testing support, and a few other stylistic things across a variety of the drivers" * tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits) remoteproc: qcom: wcss: Remove double assignment in q6v5_wcss_probe() remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region remoteproc: qcom_wcnss_iris: Simplify with dev_err_probe() remoteproc: qcom_q6v5_wcss: Simplify with dev_err_probe() remoteproc: qcom_q6v5_pas: Simplify with dev_err_probe() remoteproc: qcom_q6v5_mss: Drop redundant error printks in probe remoteproc: qcom_q6v5_mss: Simplify with dev_err_probe() remoteproc: qcom_q6v5_adsp: Simplify with dev_err_probe() remoteproc: qcom_q6v5_pas: disable auto boot for wpss remoteproc: qcom: pas: Make remoteproc name human friendly remoteproc: qcom: pas: enable SAR2130P audio DSP support remoteproc: qcom: pas: add minidump_id to SM8350 resources dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible dt-bindings: remoteproc: qcom,sm8550-pas: Add SM8750 ADSP remoteproc: qcom: wcss: Remove subdevs on the error path of q6v5_wcss_probe() remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe() remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe() remoteproc: Switch back to struct platform_driver::remove() remoteproc: k3-dsp: Force cast from iomem address space remoteproc: k3-r5: Force cast from iomem address space ...
2024-11-26Merge tag 'pci-v6.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent callers can't stop a device multiple times, even as we migrate from the global pci_rescan_remove_lock to finer-grained locking (Keith Busch) - Improve pci_walk_bus() implementation by making it recursive and moving locking up to avoid need for a 'locked' parameter (Keith Busch) - Unexport pci_walk_bus_locked(), which is only used internally by the PCI core (Keith Busch) - Detect some Thunderbolt chips that are built-in and hence 'trustworthy' by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface' ACPI properties are not quite enough (Esther Shimanovich) Resource management: - Use PCI bus addresses (not CPU addresses) in 'ranges' properties when building dynamic DT nodes so systems where PCI and CPU addresses differ work correctly (Andrea della Porta) - Tidy resource sizing and assignment with helpers to reduce redundancy (Ilpo Järvinen) - Improve pdev_sort_resources() 'bogus alignment' warning to be more specific (Ilpo Järvinen) Driver binding: - Convert driver .remove_new() callbacks to .remove() again to finish the conversion from returning 'int' to being 'void' (Sergio Paracuellos) - Export pcim_request_all_regions(), a managed interface to request all BARs (Philipp Stanner) - Replace pcim_iomap_regions_request_all() with pcim_request_all_regions(), and pcim_iomap_table()[n] with pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212 (Philipp Stanner) - Remove the now unused pcim_iomap_regions_request_all() (Philipp Stanner) - Export pcim_iounmap_region(), a managed interface to unmap and release a PCI BAR (Philipp Stanner) - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield, cavium (Philipp Stanner) Error handling: - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a bridge; previously Secondary Bus Reset could only be used when there was a single device below a bridge (Keith Busch) - Warn if we reset a running device where the driver didn't register pci_error_handlers notification callbacks (Keith Busch) ASPM: - Disable ASPM L1 before touching L1 PM Substates to follow the spec closer and avoid a CPU load timeout on some platforms (Ajay Agarwal) - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates as required per spec for all L1 Substates changes (Jian-Hong Pan) Power management: - Enable starfive controller runtime PM before probing host bridge (Mayank Rana) - Enable runtime power management for host bridges (Krishna chaitanya chundru) Power control: - Use of_platform_device_create() instead of of_platform_populate() to create pwrctl platform devices so we can control it based on the child nodes (Manivannan Sadhasivam) - Create pwrctrl platform devices only if there's a relevant power supply property (Manivannan Sadhasivam) - Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl drivers are probed before the PCI dev driver; this avoids a race where pwrctl could change device power state while the PCI driver was active (Manivannan Sadhasivam) - Find pwrctl device for removal with of_find_device_by_node() instead of searching all children of the parent (Manivannan Sadhasivam) - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller ('bwctrl') and hotplug files (Bjorn Helgaas) Bandwidth control: - Add read/modify/write locking for Link Control 2, which is used to manage Link speed (Ilpo Järvinen) - Extract Link Bandwidth Management Status check into pcie_lbms_seen(), where it can be shared between the bandwidth controller and quirks that use it to help retrain failed links (Ilpo Järvinen) - Re-add Link Bandwidth notification support with updates to address the reasons it was previously reverted (Alexandru Gagniuc, Ilpo Järvinen) - Add pcie_set_target_speed() and related functionality so drivers can manage PCIe Link speed based on thermal or other constraints (Ilpo Järvinen) - Add a thermal cooling driver to throttle PCIe Links via the existing thermal management framework (Ilpo Järvinen) - Add a userspace selftest for the PCIe bandwidth controller (Ilpo Järvinen) PCI device hotplug: - Add hotplug controller driver for Marvell OCTEON multi-function device where function 0 has a management console interface to enable/disable and provision various personalities for the other functions (Shijith Thotton) - Retain a reference to the pci_bus for the lifetime of a pci_slot to avoid a use-after-free when the thunderbolt driver resets USB4 host routers on boot, causing hotplug remove/add of downstream docks or other devices (Lukas Wunner) - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test (Guilherme Giacomo Simoes) - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET) - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence detection in cpqphp (Ilpo Järvinen) - Simplify cpqphp enumeration, which is already simple-minded and doesn't handle devices below hot-added bridges (Ilpo Järvinen) Virtualization: - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS capability but do isolate functions as though PCI_ACS_RR and PCI_ACS_CR were set, so the functions can be in independent IOMMU groups (Mengyuan Lou) TLP Processing Hints (TPH): - Add and document TLP Processing Hints (TPH) support so drivers can enable and disable TPH and the kernel can save/restore TPH configuration (Wei Huang) - Add TPH Steering Tag support so drivers can retrieve Steering Tag values associated with specific CPUs via an ACPI _DSM to improve performance by directing DMA writes closer to their consumers (Wei Huang) Data Object Exchange (DOE): - Wait up to 1 second for DOE Busy bit to clear before writing a request to the mailbox to avoid failures if the mailbox is still busy from a previous transfer (Gregory Price) Endpoint framework: - Skip attempts to allocate from endpoint controller memory window if the requested size is larger than the window (Damien Le Moal) - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle controller-specific size and alignment constraints, and add test cases to the endpoint test driver (Damien Le Moal) - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe DWC-specific alignment requirements (Damien Le Moal) - Synchronously cancel command handler work in endpoint test before cleaning up DMA and BARs (Damien Le Moal) - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel) - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas Cassel) - Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT property (Zhongqiu Han) - Release PCI domain ID of Endpoint controller parent (not controller itself) and before unregistering the controller, to avoid use-after-free (Zijun Hu) - Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing the secondary controller associated with an NTB (Zijun Hu) Cadence PCIe controller driver: - Lower severity of 'phy-names' message (Bartosz Wawrzyniak) Freescale i.MX6 PCIe controller driver: - Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that prevents use of L2 (Stefan Eichenberger) Intel VMD host bridge driver: - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 DT binding to require the exact number of clocks for each SoC (Fei Shao) - Add support for DT 'max-link-speed' and 'num-lanes' properties to restrict the link speed and width (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add DT and driver support for using either of the two PolarFire Root Ports (Conor Dooley) NVIDIA Tegra194 PCIe controller driver: - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) Qualcomm PCIe controller driver: - Add qcom SAR2130P DT binding with an additional clock (Dmitry Baryshkov) - Enable MSI interrupts if 'global' IRQ is supported, since a previous commit unintentionally masked them (Manivannan Sadhasivam) - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) - Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a and Qcom IP 1.27.0 (devi priya) - Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom platforms (Qiang Yu) - Add 'global' SPI interrupt for events like link-up, link-down to qcom,pcie-x1e80100 DT binding so we can start enumeration when the link comes up (Qiang Yu) - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to support this (Qiang Yu) - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map' DT property and doesn't need BDF-to-SID translation (Qiang Yu) Rockchip PCIe controller driver: - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align value (Damien Le Moal) - When unmapping an endpoint window, compute the region index instead of searching for it, and verify that the address was mapped (Damien Le Moal) - When mapping an endpoint window, verify that the address hasn't been mapped already (Damien Le Moal) - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal) - Fix MSI IRQ data mapping to observe the alignment constraint, which fixes intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le Moal) - Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources() for consistency with similar DT interfaces (Damien Le Moal) - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do it only in the endpoint start operation (Damien Le Moal) - Implement pci_epc_ops.stop_link() to disable link training and controller configuration (Damien Le Moal) - Attempt link training at 5 GT/s when both partners support it (Damien Le Moal) - Add a handler for PERST# signal so we can detect host-initiated resets and start link training after PERST# is deasserted (Damien Le Moal) Synopsys DesignWare PCIe controller driver: - Clear outbound address on unmap so dw_pcie_find_index() won't match an ATU index that was already unmapped (Damien Le Moal) - Use of_property_present() instead of of_property_read_bool() when testing for presence of non-boolean DT properties (Rob Herring) - Advertise 1MB size if endpoint supports Resizable BARs, which was inadvertently lost in v6.11 (Niklas Cassel) TI J721E PCIe driver: - Add PCIe support for J722S SoC (Siddharth Vadapalli) - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us), before deasserting PERST# to ensure power and refclk are stable (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex mode (Kishon Vijay Abraham I) - Try to avoid unrecoverable SError for attempts to issue config transactions when the link is down; this is racy but the best we can do (Kishon Vijay Abraham I) Miscellaneous: - Reorganize kerneldoc parameter names to match order in function signature (Julia Lawall) - Fix sysfs reset_method_store() memory leak (Todd Kjos) - Simplify pci_create_slot() (Ilpo Järvinen) - Fix incorrect printf format specifiers in pcitest (Luo Yifan)" * tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits) PCI: rockchip-ep: Handle PERST# signal in EP mode PCI: rockchip-ep: Improve link training PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation PCI: rockchip-ep: Refactor endpoint link training enable PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt() PCI: rockchip-ep: Fix MSI IRQ data mapping PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr() PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr() PCI: rockchip-ep: Use a macro to define EP controller .align feature PCI: rockchip-ep: Fix address translation unit programming PCI/pwrctrl: Rename pwrctrl functions and structures PCI/pwrctrl: Rename pwrctl files to pwrctrl PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers PCI/pwrctl: Create pwrctl device only if at least one power supply is present PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices tools: PCI: Fix incorrect printf format specifiers ...
2024-11-27kbuild: Add Propeller configuration for kernel buildRong Xu
Add the build support for using Clang's Propeller optimizer. Like AutoFDO, Propeller uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. The support requires a Clang compiler LLVM 19 or later, and the create_llvm_prof tool (https://github.com/google/autofdo/releases/tag/v0.30.1). This commit is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Here is an example workflow for building an AutoFDO+Propeller optimized kernel: 1) Build the kernel on the host machine, with AutoFDO and Propeller build config CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y then $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> “<autofdo_profile>” is the profile collected when doing a non-Propeller AutoFDO build. This step builds a kernel that has the same optimization level as AutoFDO, plus a metadata section that records basic block information. This kernel image runs as fast as an AutoFDO optimized kernel. 2) Install the kernel on test/production machines. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \ -o <perf_file> -- <loadtest> For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 # To see if Zen3 support LBR: $ cat proc/cpuinfo | grep " brs" # To see if Zen4 support LBR: $ cat proc/cpuinfo | grep amd_lbr_v2 # If the result is yes, then collect the profile using: $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c <count> -o <perf_file> -- <loadtest> 4) (Optional) Download the raw perf file to the host machine. 5) Generate Propeller profile: $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \ --format=propeller --propeller_output_module_name \ --out=<propeller_profile_prefix>_cc_profile.txt \ --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt “create_llvm_prof” is the profile conversion tool, and a prebuilt binary for linux can be found on https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build from source). "<propeller_profile_prefix>" can be something like "/home/user/dir/any_string". This command generates a pair of Propeller profiles: "<propeller_profile_prefix>_cc_profile.txt" and "<propeller_profile_prefix>_ld_profile.txt". 6) Rebuild the kernel using the AutoFDO and Propeller profile files. CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y and $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \ CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix> Co-developed-by: Han Shen <shenhan@google.com> Signed-off-by: Han Shen <shenhan@google.com> Signed-off-by: Rong Xu <xur@google.com> Suggested-by: Sriraman Tallam <tmsriram@google.com> Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Stephane Eranian <eranian@google.com> Tested-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-11-26Merge tag 'rust-6.13' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Enable a series of lints, including safety-related ones, e.g. the compiler will now warn about missing safety comments, as well as unnecessary ones. How safety documentation is organized is a frequent source of review comments, thus having the compiler guide new developers on where they are expected (and where not) is very nice. - Start using '#[expect]': an interesting feature in Rust (stabilized in 1.81.0) that makes the compiler warn if an expected warning was _not_ emitted. This is useful to avoid forgetting cleaning up locally ignored diagnostics ('#[allow]'s). - Introduce '.clippy.toml' configuration file for Clippy, the Rust linter, which will allow us to tweak its behaviour. For instance, our first use cases are declaring a disallowed macro and, more importantly, enabling the checking of private items. - Lints-related fixes and cleanups related to the items above. - Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the kernel into stable Rust, one of the major pieces of the puzzle is the support to write custom types that can be used as 'self', i.e. as receivers, since the kernel needs to write types such as 'Arc' that common userspace Rust would not. 'arbitrary_self_types' has been accepted to become stable, and this is one of the steps required to get there. - Remove usage of the 'new_uninit' unstable feature. - Use custom C FFI types. Includes a new 'ffi' crate to contain our custom mapping, instead of using the standard library 'core::ffi' one. The actual remapping will be introduced in a later cycle. - Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize' instead of 32/64-bit integers. - Fix 'size_t' in bindgen generated prototypes of C builtins. - Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue in the projects, which we managed to trigger with the upcoming tracepoint support. It includes a build test since some distributions backported the fix (e.g. Debian -- thanks!). All major distributions we list should be now OK except Ubuntu non-LTS. 'macros' crate: - Adapt the build system to be able run the doctests there too; and clean up and enable the corresponding doctests. 'kernel' crate: - Add 'alloc' module with generic kernel allocator support and remove the dependency on the Rust standard library 'alloc' and the extension traits we used to provide fallible methods with flags. Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'. Add the 'Box' type (a heap allocation for a single value of type 'T' that is also generic over an allocator and considers the kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add 'ArrayLayout' type. Add 'Vec' (a contiguous growable array type) and its shorthand aliases '{K,V,KV}Vec', including iterator support. For instance, now we may write code such as: let mut v = KVec::new(); v.push(1, GFP_KERNEL)?; assert_eq!(&v, &[1]); Treewide, move as well old users to these new types. - 'sync' module: add global lock support, including the 'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types and the 'global_lock!' macro. Add the 'Lock::try_lock' method. - 'error' module: optimize 'Error' type to use 'NonZeroI32' and make conversion functions public. - 'page' module: add 'page_align' function. - Add 'transmute' module with the existing 'FromBytes' and 'AsBytes' traits. - 'block::mq::request' module: improve rendered documentation. - 'types' module: extend 'Opaque' type documentation and add simple examples for the 'Either' types. drm/panic: - Clean up a series of Clippy warnings. Documentation: - Add coding guidelines for lints and the '#[expect]' feature. - Add Ubuntu to the list of distributions in the Quick Start guide. MAINTAINERS: - Add Danilo Krummrich as maintainer of the new 'alloc' module. And a few other small cleanups and fixes" * tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits) rust: alloc: Fix `ArrayLayout` allocations docs: rust: remove spurious item in `expect` list rust: allow `clippy::needless_lifetimes` rust: warn on bindgen < 0.69.5 and libclang >= 19.1 rust: use custom FFI integer types rust: map `__kernel_size_t` and friends also to usize/isize rust: fix size_t in bindgen prototypes of C builtins rust: sync: add global lock support rust: macros: enable the rest of the tests rust: macros: enable paste! use from macro_rules! rust: enable macros::module! tests rust: kbuild: expand rusttest target for macros rust: types: extend `Opaque` documentation rust: block: fix formatting of `kernel::block::mq::request` module rust: macros: fix documentation of the paste! macro rust: kernel: fix THIS_MODULE header path in ThisModule doc comment rust: page: add Rust version of PAGE_ALIGN rust: helpers: remove unnecessary header includes rust: exports: improve grammar in commentary drm/panic: allow verbose version check ...
2024-11-26Merge tag 'docs-6.13-2' of git://git.lwn.net/linuxLinus Torvalds
Pull more documentation updates from Jonathan Corbet: "A few late-arriving fixes, plus two more significant changes that were *almost* ready at the beginning of the merge window: - A new document on debugging techniques from Sebastian Fricke - A clarification on MODULE_LICENSE terms meant to head off the sort of confusion that led to the recent Tuxedo Computers mess" * tag 'docs-6.13-2' of git://git.lwn.net/linux: docs: Add debugging guide for the media subsystem docs: Add debugging section to process docs/licensing: Clarify wording about "GPL" and "Proprietary" docs: core-api/gfp_mask-from-fs-io: indicate that vmalloc supports GFP_NOFS/GFP_NOIO Documentation: kernel-doc: enumerate identifier *type*s Documentation: pwrseq: Fix trivial misspellings Documentation: filesystems: update filename extensions