| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a collection of fixes this time, really too many
to list individually. Many stack fixes, even rfkill
(found by simulation and the new eevdf scheduler)!
Also a bigger maintainers file cleanup, to remove old
and redundant information.
* tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits)
wifi: iwlwifi: mvm: Fix incorrect usage of scan API
wifi: mac80211: Create resources for disabled links
wifi: cfg80211: avoid leaking stack data into trace
wifi: mac80211: allow transmitting EAPOL frames with tainted key
wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
wifi: cfg80211: Fix 6GHz scan configuration
wifi: mac80211: fix potential key leak
wifi: mac80211: fix potential key use-after-free
wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
wifi: brcmfmac: Replace 1-element arrays with flexible arrays
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM
rfkill: sync before userspace visibility/changes
wifi: mac80211: fix mesh id corruption on 32 bit systems
wifi: cfg80211: add missing kernel-doc for cqm_rssi_work
wifi: cfg80211: fix cqm_config access race
wifi: iwlwifi: mvm: Fix a memory corruption issue
wifi: iwlwifi: Ensure ack flag is properly cleared.
wifi: iwlwifi: dbg_ini: fix structure packing
iwlwifi: mvm: handle PS changes in vif_cfg_changed
...
====================
Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de. Update all links to the
new URL.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull genpm / pmdomain rename from Ulf Hansson:
"This renames the genpd subsystem to pmdomain.
As discussed on LKML, using 'genpd' as the name of a subsystem isn't
very self-explanatory and the acronym itself that means Generic PM
Domain, is known only by a limited group of people.
The suggestion to improve the situation is to rename the subsystem to
'pmdomain', which there seems to be a good consensus around using.
Ideally it should indicate that its purpose is to manage Power Domains
or 'PM domains' as we often also use within the Linux Kernel
terminology"
* tag 'pmdomain-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: Rename the genpd subsystem to pmdomain
|
|
It has been pointed out that naming a subsystem "genpd" isn't very
self-explanatory and the acronym itself that means Generic PM Domain, is
known only by a limited group of people.
In a way to improve the situation, let's rename the subsystem to pmdomain,
which ideally should indicate that this is about so called Power Domains or
"PM domains" as we often also use within the Linux Kernel terminology.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- several fixes for handling directory item (inserting, removing,
iteration, error handling)
- fix transaction commit stalls when auto relocation is running and
blocks other tasks that want to commit
- fix a build error when DEBUG is enabled
- fix lockdep warning in inode number lookup ioctl
- fix race when finishing block group creation
- remove link to obsolete wiki in several files
* tag 'for-6.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: remove links to obsolete btrfs.wiki.kernel.org
btrfs: assert delayed node locked when removing delayed item
btrfs: remove BUG() after failure to insert delayed dir index item
btrfs: improve error message after failure to add delayed dir index item
btrfs: fix a compilation error if DEBUG is defined in btree_dirty_folio
btrfs: check for BTRFS_FS_ERROR in pending ordered assert
btrfs: fix lockdep splat and potential deadlock after failure running delayed items
btrfs: do not block starts waiting on previous transaction commit
btrfs: release path before inode lookup during the ino lookup ioctl
btrfs: fix race between finishing block group creation and its item update
|
|
Pull drm ci scripts from Dave Airlie:
"This is a bunch of ci integration for the freedesktop gitlab instance
where we currently do upstream userspace testing on diverse sets of
GPU hardware. From my perspective I think it's an experiment worth
going with and seeing how the benefits/noise playout keeping these
files useful.
Ideally I'd like to get this so we can do pre-merge testing on PRs
eventually.
Below is some info from danvet on why we've ended up making the
decision and how we can roll it back if we decide it was a bad plan.
Why in upstream?
- like documentation, testcases, tools CI integration is one of these
things where you can waste endless amounts of time if you
accidentally have a version that doesn't match your source code
- but also like the above, there's a balance, this is the initial cut
of what we think makes sense to keep in sync vs out-of-tree,
probably needs adjustment
- gitlab supports out-of-repo gitlab integration and that's what's
been used for the kernel in drm, but it results in per-driver
fragmentation and lots of duplicated effort. the simple act of
smashing an arbitrary winner into a topic branch already started
surfacing patches on dri-devel and sparking good cross driver team
discussions
Why gitlab?
- it's not any more shit than any of the other CI
- drm userspace uses it extensively for everything in userspace, we
have a lot of people and experience with this, including
integration of hw testing labs
- media userspace like gstreamer is also on gitlab.fd.o, and there's
discussion to extend this to the media subsystem in some fashion
Can this be shared?
- there's definitely a pile of code that could move to scripts/ if
other subsystem adopt ci integration in upstream kernel git. other
bits are more drm/gpu specific like the igt-gpu-tests/tools
integration
- docker images can be run locally or in other CI runners
Will we regret this?
- it's all in one directory, intentionally, for easy deletion
- probably 1-2 years in upstream to see whether this is worth it or a
Big Mistake. that's roughly what it took to _really_ roll out solid
CI in the bigger userspace projects we have on gitlab.fd.o like
mesa3d"
* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
drm: ci: docs: fix build warning - add missing escape
drm: Add initial ci/ subdirectory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround"
* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - ALC287 I2S speaker platform support
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
ASoC: Intel: avs: Provide support for fallback topology
ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
ASoC: rt5645: NULL pointer access when removing jack
ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
ALSA: sb: Fix wrong argument in commented code
ALSA: pcm: Fix error checks of default read/write copy ops
ASoC: Name iov_iter argument as iterator instead of buffer
ASoC: dmaengine: Drop unused iov_iter for process callback
ALSA: hda/tas2781: Use standard clamp() macro
ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
ASoC: cs35l45: Rename DACPCM1 Source control
ASoC: cs35l45: Fix "Dead assigment" warning
ASoC: cs35l45: Add support for Chip ID 0x35A460
...
|
|
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The wiki has been archived and is not updated anymore. Remove or replace
the links in files that contain it (MAINTAINERS, Kconfig, docs).
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix a glock state (non-)transition bug when a dlm request times out
and is canceled, and we have locking requests that can now be granted
immediately
- Various fixes and cleanups in how the logd and quotad daemons are
woken up and terminated
- Fix several bugs in the quota data reference counting and shrinking.
Free quota data objects synchronously in put_super() instead of
letting call_rcu() run wild
- Make sure not to deallocate quota data during a withdraw; rather,
defer quota data deallocation to put_super(). Withdraws can happen in
contexts in which callers on the stack are holding quota data
references
- Many minor quota fixes and cleanups by Bob
- Update the the mailing list address for gfs2 and dlm. (It's the same
list for both and we are moving it to gfs2@lists.linux.dev)
- Various other minor cleanups
* tag 'gfs2-v6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (51 commits)
MAINTAINERS: Update dlm mailing list
MAINTAINERS: Update gfs2 mailing list
gfs2: change qd_slot_count to qd_slot_ref
gfs2: check for no eligible quota changes
gfs2: Remove useless assignment
gfs2: simplify slot_get
gfs2: Simplify qd2offset
gfs2: introduce qd_bh_get_or_undo
gfs2: Remove quota allocation info from quota file
gfs2: use constant for array size
gfs2: Set qd_sync_gen in do_sync
gfs2: Remove useless err set
gfs2: Small gfs2_quota_lock cleanup
gfs2: move qdsb_put and reduce redundancy
gfs2: improvements to sysfs status
gfs2: Don't try to sync non-changes
gfs2: Simplify function need_sync
gfs2: remove unneeded pg_oflow variable
gfs2: remove unneeded variable done
gfs2: pass sdp to gfs2_write_buf_to_page
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Stefan Roesch has added ksm statistics to /proc/pid/smaps
- Also a number of singleton patches, mainly cleanups and leftovers
* tag 'mm-stable-2023-09-04-14-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/kmemleak: move up cond_resched() call in page scanning loop
mm: page_alloc: remove stale CMA guard code
MAINTAINERS: add rmap.h to mm entry
rmap: remove anon_vma_link() nommu stub
proc/ksm: add ksm stats to /proc/pid/smaps
mm/hwpoison: rename hwp_walk* to hwpoison_walk*
mm: memory-failure: add PageOffline() check
|
|
The new gfs2@ list will also be used for dlm development.
Signed-off-by: Andrew Price <anprice@redhat.com>
Acked-by: David Teigland <teigland@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly updates of thermal control drivers for ARM platforms,
new thermal control support for Loongson-2 and a couple of core
cleanups made possible by recent changes merged previously.
Specifics:
- Check if the Tegra BPMP supports the trip points in order to set
the .set_trips callback (Mikko Perttunen)
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu)
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao)
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment from the sun8i driver (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom tsens
(Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du)
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado)
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki)"
* tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: Rework .get_trend() thermal zone callback
thermal: core: Drop unused .get_trip_*() callbacks
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull NFD updates from Lee Jones:
"New Drivers:
- Add support for the Cirrus Logic CS42L43 Audio CODEC
Fix-ups:
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree
cache
- Ensure correct includes are present and remove some that are not
required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better
ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for
spin_{un}lock_irq{save,restore}()
Bug Fixes:
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting"
* tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits)
mfd: mc13xxx: Simplify device data fetching in probe()
mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
mfd: rz-mtu3: Reduce critical sections
mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning
mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning
mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning
mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning
mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning
mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning
mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning
mfd: rn5t618: Remove redundant of_match_ptr()
mfd: lochnagar-i2c: Remove redundant of_match_ptr()
mfd: stpmic1: Remove redundant of_match_ptr()
mfd: act8945a: Remove redundant of_match_ptr()
mfd: rsmu_spi: Remove redundant of_match_ptr()
mfd: altera-a10sr: Remove redundant of_match_ptr()
mfd: rsmu_i2c: Remove redundant of_match_ptr()
mfd: tc3589x: Remove redundant of_match_ptr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Do not try to get the console lock when it is not need or useful in
panic()
- Replace the global console_suspended state by a per-console flag
- Export symbols needed for dumping the raw printk buffer in panic()
- Fix documentation of printf formats for integer types
- Moved Sergey Senozhatsky to the reviewer role
- Misc cleanups
* tag 'printk-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: export symbols for debug modules
lib: test_scanf: Add explicit type cast to result initialization in test_number_prefix()
printk: ringbuffer: Fix truncating buffer size min_t cast
printk: Rename abandon_console_lock_in_panic() to other_cpu_in_panic()
printk: Add per-console suspended state
printk: Consolidate console deferred printing
printk: Do not take console lock for console_flush_on_panic()
printk: Keep non-panic-CPUs out of console lock
printk: Reduce console_unblank() usage in unsafe scenarios
kdb: Do not assume write() callback available
docs: printk-formats: Treat char as always unsigned
docs: printk-formats: Fix hex printing of signed values
MAINTAINERS: adjust printk/vsprintf entries
|
|
The ath12k wireless driver now has a wiki, so advertise it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230829-ath12kwiki-v1-1-df37127527a1@quicinc.com
|
|
As hostap is marked as obsolete there's no need to have a maintainer. Also
remove the link to the web page.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-5-kvalo@kernel.org
|
|
Luca's tree hasn't been used for 10 years so remove it.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-4-kvalo@kernel.org
|
|
Jes' tree hasn't been used for six years so remove it.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-3-kvalo@kernel.org
|
|
Linville's tree hasn't been used for something like 10 years so remove it.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-2-kvalo@kernel.org
|
|
The top level entry for wireless drivers already contains to the wiki so no
need to duplicate that in driver entries:
NETWORKING DRIVERS (WIRELESS)
[...]
W: https://wireless.wiki.kernel.org/
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-1-kvalo@kernel.org
|
|
Update the MAINTAINERS email for TEXAS INSTRUMENTS ASoC DRIVERS.
Signed-off-by: Kevin-Lu <kevin-lu@ti.com>
Link: https://lore.kernel.org/r/20230903161439.85-1-kevin-lu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual a couple of new drivers, a bunch of new device support and
few updates to existing drivers
New Support:
- Starfive dphy rx, JH7110 usb and pcie support
- Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support
- Qualcomm sa8775p PCIe support, M31 USB PHY driver
- Samsung Exynos850 usb support
Updates:
- Mediatek dsi driver clock updates
- Qualcomm sm8150 combo phy with reworking of qmp pcie driver
- Xilinx zynqmp runtime PM support"
* tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits)
phy: exynos5-usbdrd: Add Exynos850 support
phy: exynos5-usbdrd: Add 26MHz ref clk support
phy: exynos5-usbdrd: Make it possible to pass custom phy ops
dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support
phy: qcom-qmp-combo: fix clock probing
phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs
phy: qcom-qmp-pcie: populate offsets configuration
phy: qcom-qmp-pcie: simplify clock handling
phy: qcom-qmp-pcie: keep offset tables sorted
phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config
dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs
dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed
phy: qcom: Introduce M31 USB PHY driver
dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
phy: rockchip: inno-dsidphy: Add rv1126 support
dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126
dt-bindings: phy: mediatek,tphy: allow simple nodename pattern
phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning
phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning
...
|
|
Make it easier to figure out where to send patches for this file.
Link: https://lkml.kernel.org/r/efbc7689d35a48ff402644d696aa9a8d8bb6333a.1692877089.git.baruch@tkos.co.il
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Consolidate probe_device path
- Make the PCI-SAC IOVA allocation trick PCI-only
AMD IOMMU:
- Consolidate PPR log handling
- Interrupt handling improvements
- Refcount fixes for amd_iommu_v2 driver
Intel VT-d driver:
- Enable idxd device DMA with pasid through iommu dma ops
- Lift RESV_DIRECT check from VT-d driver to core
- Miscellaneous cleanups and fixes
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
- Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
- Support for Qualcomm's legacy firmware implementation featured
on at least MSM8956 and MSM8976
- Match compatible strings for Qualcomm SM6350 and SM6375 SoC
variants
- SMMUv3:
- Use 'ida' instead of a bitmap for VMID allocation
- Rockchip IOMMU:
- Lift page-table allocation restrictions on newer hardware
- Mediatek IOMMU:
- Add MT8188 IOMMU Support
- Renesas IOMMU:
- Allow PCIe devices
.. and the usual set of cleanups an smaller fixes"
* tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits)
iommu: Explicitly include correct DT includes
iommu/amd: Remove unused declarations
iommu/arm-smmu-qcom: Add SM6375 SMMUv2
iommu/arm-smmu-qcom: Add SM6350 DPU compatible
iommu/arm-smmu-qcom: Add SM6375 DPU compatible
iommu/arm-smmu-qcom: Sort the compatible list alphabetically
dt-bindings: arm-smmu: Fix MSM8998 clocks description
iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope()
iommu/vt-d: Fix to convert mm pfn to dma pfn
iommu/vt-d: Fix to flush cache of PASID directory table
iommu/vt-d: Remove rmrr check in domain attaching device path
iommu: Prevent RESV_DIRECT devices from blocking domains
dmaengine/idxd: Re-enable kernel workqueue under DMA API
iommu/vt-d: Add set_dev_pasid callback for dma domain
iommu/vt-d: Prepare for set_dev_pasid callback
iommu/vt-d: Make prq draining code generic
iommu/vt-d: Remove pasid_mutex
iommu/vt-d: Add domain_flush_pasid_iotlb()
iommu: Move global PASID allocation from SVA to core
iommu: Generalize PASID 0 for normal DMA w/o PASID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Per-cpu cpu usage stats are now tracked
This currently isn't printed out in the cgroupfs interface and can
only be accessed through e.g. BPF. Should decide on a not-too-ugly
way to show per-cpu stats in cgroupfs
- cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be
created below non-partition parents, which should ease the management
of partition cpusets
- A lot of code and documentation cleanup patches
- tools/testing/selftests/cgroup/test_cpuset.c added
* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
cgroup: Avoid -Wstringop-overflow warnings
cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
cgroup: clean up if condition in cgroup_pidlist_start()
cgroup: fix obsolete function name in cgroup_destroy_locked()
Documentation: cgroup-v2.rst: Correct number of stats entries
cgroup: fix obsolete function name above css_free_rwork_fn()
cgroup/cpuset: fix kernel-doc
cgroup: clean up printk()
cgroup: fix obsolete comment above cgroup_create()
docs: cgroup-v1: fix typo
docs: cgroup-v1: correct the term of Page Cache organization in inode
cgroup/misc: Store atomic64_t reads to u64
cgroup/misc: Change counters to be explicit 64bit types
cgroup/misc: update struct members descriptions
cgroup: remove cgrp->kn check in css_populate_dir()
cgroup: fix obsolete function name
cgroup: use cached local variable parent in for loop
cgroup: remove obsolete comment above struct cgroupstats
cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- devm fixes for problems that caused use-after-free reports (Rahul
Rameshbabu)
- Some extensive HID docs (Marco Morandini)
- Constification of struct class (Ivan Orlov and Greg Kroah-Hartman)
- Google Stadia Force Feedback support (Fabio Baltieri)
- Various fixes and new device ID support
* tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (42 commits)
HID: logitech-hidpp: rework one more time the retries attempts
HID: nvidia-shield: Reference hid_device devm allocation of input_dev name
HID: multitouch: Correct devm device reference for hidinput input_dev name
HID: uclogic: Correct devm device reference for hidinput input_dev name
HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()
HID: i2c-hid: elan: Add ili9882t timing
dt-bindings: input: i2c-hid: Introduce Ilitek ili9882t
HID: apple: Add "Hailuck" to the list of non-apple keyboards
HID: steelseries: arctis_1_battery_request[] should be static
MAINTAINERS: update my email address
HID: logitech-hidpp: Add support for Logitech MX Anywhere 3 mouse
HID: wacom: struct name cleanup
HID: wacom: remove unnecessary 'connected' variable from EKR
HID: wacom: remove the battery when the EKR is off
HID: nvidia-shield: Update Thunderstrike LED instance name to use id
HID: nvidia-shield: Add battery support for Thunderstrike
HID: nvidia-shield: Remove led_classdev_unregister in thunderstrike_create
HID: hid-google-stadiaff: add support for Stadia force feedback
HID: logitech-dj: Add support for a new lightspeed receiver iteration
HID: logitech-hidpp: Add support for the Pro X Superlight
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
|
|
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.
The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate
More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
Example PMA region passes as a DT node from OpenSBI:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
KVM: x86: Selftests changes for 6.6:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
|
|
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
|
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
|
|
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"
[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]
* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...
|
|
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
|
|
Pull xfs updates from Chandan Babu:
- Chandan Babu will be taking over as the XFS release manager. He has
reviewed all the patches that are in this branch, though I'm signing
the branch one last time since I'm still technically maintainer. :P
- Create a maintainer entry profile for XFS in which we lay out the
various roles that I have played for many years. Aside from release
manager, the remaining roles are as yet unfilled.
- Start merging online repair -- we now have in-memory pageable memory
for staging btrees, a bunch of pending fixes, and we've started the
process of refactoring the scrub support code to support more of
repair. In particular, reaping of old blocks from damaged structures.
- Scrub the realtime summary file.
- Fix a bug where scrub's quota iteration only ever returned the root
dquot. Oooops.
- Fix some typos.
[ Pull request from Chandan Babu, but signed tag and description from
Darrick Wong, thus the first person singular above is Darrick, not
Chandan ]
* tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (37 commits)
fs/xfs: Fix typos in comments
xfs: fix dqiterate thinko
xfs: don't check reflink iflag state when checking cow fork
xfs: simplify returns in xchk_bmap
xfs: rewrite xchk_inode_is_allocated to work properly
xfs: hide xfs_inode_is_allocated in scrub common code
xfs: fix agf_fllast when repairing an empty AGFL
xfs: allow userspace to rebuild metadata structures
xfs: clear pagf_agflreset when repairing the AGFL
xfs: allow the user to cancel repairs before we start writing
xfs: don't complain about unfixed metadata when repairs were injected
xfs: implement online scrubbing of rtsummary info
xfs: always rescan allegedly healthy per-ag metadata after repair
xfs: move the realtime summary file scrubber to a separate source file
xfs: wrap ilock/iunlock operations on sc->ip
xfs: get our own reference to inodes that we want to scrub
xfs: track usage statistics of online fsck
xfs: improve xfarray quicksort pivot
xfs: create scaffolding for creating debugfs entries
xfs: cache pages used for xfarray quicksort convergence
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, quota, and udf updates from Jan Kara:
- fixes for possible use-after-free issues with quota when racing with
chown
- fixes for ext2 crashing when xattr allocation races with another
block allocation to the same file from page writeback code
- fix for block number overflow in ext2
- marking of reiserfs as obsolete in MAINTAINERS
- assorted minor cleanups
* tag 'for_v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix kernel-doc warnings
ext2: improve consistency of ext2_fsblk_t datatype usage
ext2: dump current reservation window info
ext2: fix race between setxattr and write back
ext2: introduce new flags argument for ext2_new_blocks()
ext2: remove ext2_new_block()
ext2: fix datatype of block number in ext2_xattr_set2()
udf: Drop pointless aops assignment
quota: use lockdep_assert_held_write in dquot_load_quota_sb
MAINTAINERS: change reiserfs status to obsolete
udf: Fix -Wstringop-overflow warnings
quota: simplify drop_dquot_ref()
quota: fix dqput() to follow the guarantees dquot_srcu should provide
quota: add new helper dquot_active()
quota: rename dquot_active() to inode_quota_active()
quota: factor out dquot_write_dquot()
ext2: remove redundant assignment to variable desc and variable best_desc
|
|
Pull io_uring updates from Jens Axboe:
"Fairly quiet round in terms of features, mostly just improvements all
over the map for existing code. In detail:
- Initial support for socket operations through io_uring. Latter half
of this will likely land with the 6.7 kernel, then allowing things
like get/setsockopt (Breno)
- Cleanup of the cancel code, and then adding support for canceling
requests with the opcode as the key (me)
- Improvements for the io-wq locking (me)
- Fix affinity setting for SQPOLL based io-wq (me)
- Remove the io_uring userspace code. These were added initially as
copies from liburing, but all of them have since bitrotted and are
way out of date at this point. Rather than attempt to keep them in
sync, just get rid of them. People will have liburing available
anyway for these examples. (Pavel)
- Series improving the CQ/SQ ring caching (Pavel)
- Misc fixes and cleanups (Pavel, Yue, me)"
* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
io_uring: move iopoll ctx fields around
io_uring: move multishot cqe cache in ctx
io_uring: separate task_work/waiting cache line
io_uring: banish non-hot data to end of io_ring_ctx
io_uring: move non aligned field to the end
io_uring: add option to remove SQ indirection
io_uring: compact SQ/CQ heads/tails
io_uring: force inline io_fill_cqe_req
io_uring: merge iopoll and normal completion paths
io_uring: reorder cqring_flush and wakeups
io_uring: optimise extra io_get_cqe null check
io_uring: refactor __io_get_cqe()
io_uring: simplify big_cqe handling
io_uring: cqe init hardening
io_uring: improve cqe !tracing hot path
io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
io_uring: simplify io_run_task_work_sig return
io_uring/rsrc: keep one global dummy_ubuf
io_uring: never overflow io_aux_cqe
...
|
