summaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2023-04-25Merge tag 'soc-drivers-6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "The most notable updates this time are for Qualcomm Snapdragon platforms. The Inline-Crypto-Engine gets a new DT binding and driver, and a number of drivers now support additional Snapdragon variants, in particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc (edac) and rpm drivers get notable functionality updates. Updates on other platforms include: - Various updates to the Mediatek mutex and mmsys drivers, including support for the Helio X10 SoC - Support for unidirectional mailbox channels in Arm SCMI firmware - Support for per cpu asynchronous notification in OP-TEE firmware - Minor updates for memory controller drivers. - Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra, Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX SoC drivers, mainly updating the use of MODULE_LICENSE() macros and obsolete DT driver interfaces" * tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: ti: smartreflex: Simplify getting the opam_sr pointer bus: vexpress-config: Add explicit of_platform.h include soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS memory: mtk-smi: mt8365: Add SMI Support dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365 dt-bindings: memory-controllers: mediatek,smi-common: add mt8365 memory: tegra: read values from correct device dt-bindings: crypto: Add Qualcomm Inline Crypto Engine soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver dt-bindings: firmware: document Qualcomm QCM2290 SCM soc: qcom: rpmh-rsc: Support RSC v3 minor versions soc: qcom: smd-rpm: Use GFP_ATOMIC in write path soc/tegra: fuse: Remove nvmem root only access soc/tegra: cbb: tegra194: Use of_address_count() helper soc/tegra: cbb: Remove MODULE_LICENSE in non-modules ARM: tegra: Remove MODULE_LICENSE in non-modules soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource() soc: tegra: cbb: Drop empty platform remove function firmware: arm_scmi: Add support for unidirectional mailbox channels dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels ...
2023-04-25Merge branches 'clk-starfive', 'clk-fractional' and 'clk-devmof' into clk-nextStephen Boyd
- Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() * clk-starfive: clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: starfive: Avoid casting iomem pointers MAINTAINERS: generalise StarFive clk/reset entries reset: starfive: Add StarFive JH7110 reset driver clk: starfive: Add StarFive JH7110 always-on clock driver clk: starfive: Add StarFive JH7110 system clock driver reset: starfive: jh71x0: Use 32bit I/O on 32bit registers reset: starfive: Rename "jh7100" to "jh71x0" for the common code reset: starfive: Extract the common JH71X0 reset code reset: starfive: Factor out common JH71X0 reset code reset: Create subdirectory for StarFive drivers reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE clk: starfive: Rename "jh7100" to "jh71x0" for the common code clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h clk: starfive: Factor out common JH7100 and JH7110 code clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator * clk-fractional: clk: Remove mmask and nmask fields in struct clk_fractional_divider clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider clk: Compute masks for fractional_divider clk when needed. * clk-devmof: clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` clk: hsdk-pll: Use managed `of_clk_add_hw_provider()` clk: cdce706: Use managed `of_clk_add_hw_provider()` clk: axs10x: Use managed `of_clk_add_hw_provider()` clk: axm5516: Use managed `of_clk_add_hw_provider()` clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`
2023-04-25Merge branches 'clk-mediatek', 'clk-sunplus', 'clk-loongson' and ↵Stephen Boyd
'clk-socfpga' into clk-next - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Reimplement Loongson-1 clk driver with DT support - Clk driver support for Loongson-2 SoCs - Migrate socfpga clk driver to of_clk_add_hw_provider() * clk-mediatek: (84 commits) clk: mediatek: fhctl: Mark local variables static clk: mediatek: Use right match table, include mod_devicetable clk: mediatek: Add MT8188 adsp clock support clk: mediatek: Add MT8188 imp i2c wrapper clock support clk: mediatek: Add MT8188 wpesys clock support clk: mediatek: Add MT8188 vppsys1 clock support clk: mediatek: Add MT8188 vppsys0 clock support clk: mediatek: Add MT8188 vencsys clock support clk: mediatek: Add MT8188 vdosys1 clock support clk: mediatek: Add MT8188 vdosys0 clock support clk: mediatek: Add MT8188 vdecsys clock support clk: mediatek: Add MT8188 mfgcfg clock support clk: mediatek: Add MT8188 ipesys clock support clk: mediatek: Add MT8188 imgsys clock support clk: mediatek: Add MT8188 ccusys clock support clk: mediatek: Add MT8188 camsys clock support clk: mediatek: Add MT8188 infrastructure clock support clk: mediatek: Add MT8188 peripheral clock support clk: mediatek: Add MT8188 topckgen clock support clk: mediatek: Add MT8188 apmixedsys clock support ... * clk-sunplus: clk: Add Sunplus SP7021 clock driver * clk-loongson: clk: clk-loongson2: add clock controller driver support dt-bindings: clock: add loongson-2 boot clock index MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE MIPS: loongson32: Update the clock initialization clk: loongson1: Re-implement the clock driver clk: loongson1: Remove the outdated driver dt-bindings: clock: Add Loongson-1 clock * clk-socfpga: clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling
2023-04-25Merge tag 'timers-core-2023-04-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers and timekeeping updates from Thomas Gleixner: - Improve the VDSO build time checks to cover all dynamic relocations VDSO does not allow dynamic relocations, but the build time check is incomplete and fragile. It's based on architectures specifying the relocation types to search for and does not handle R_*_NONE relocation entries correctly. R_*_NONE relocations are injected by some GNU ld variants if they fail to determine the exact .rel[a]/dyn_size to cover trailing zeros. R_*_NONE relocations must be ignored by dynamic loaders, so they should be ignored in the build time check too. Remove the architecture specific relocation types to check for and validate strictly that no other relocations than R_*_NONE end up in the VSDO .so file. - Prefer signal delivery to the current thread for CLOCK_PROCESS_CPUTIME_ID based posix-timers Such timers prefer to deliver the signal to the main thread of a process even if the context in which the timer expires is the current task. This has the downside that it might wake up an idle thread. As there is no requirement or guarantee that the signal has to be delivered to the main thread, avoid this by preferring the current task if it is part of the thread group which shares sighand. This not only avoids waking idle threads, it also distributes the signal delivery in case of multiple timers firing in the context of different threads close to each other better. - Align the tick period properly (again) For a long time the tick was starting at CLOCK_MONOTONIC zero, which allowed users space applications to either align with the tick or to place a periodic computation so that it does not interfere with the tick. The alignement of the tick period was more by chance than by intention as the tick is set up before a high resolution clocksource is installed, i.e. timekeeping is still tick based and the tick period advances from there. The early enablement of sched_clock() broke this alignement as the time accumulated by sched_clock() is taken into account when timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is not longer a multiple of tick periods, which breaks applications which relied on that behaviour. Cure this by aligning the tick starting point to the next multiple of tick periods, i.e 1000ms/CONFIG_HZ. - A set of NOHZ fixes and enhancements: * Cure the concurrent writer race for idle and IO sleeptime statistics The statitic values which are exposed via /proc/stat are updated from the CPU local idle exit and remotely by cpufreq, but that happens without any form of serialization. As a consequence sleeptimes can be accounted twice or worse. Prevent this by restricting the accumulation writeback to the CPU local idle exit and let the remote access compute the accumulated value. * Protect idle/iowait sleep time with a sequence count Reading idle/iowait sleep time, e.g. from /proc/stat, can race with idle exit updates. As a consequence the readout may result in random and potentially going backwards values. Protect this by a sequence count, which fixes the idle time statistics issue, but cannot fix the iowait time problem because iowait time accounting races with remote wake ups decrementing the remote runqueues nr_iowait counter. The latter is impossible to fix, so the only way to deal with that is to document it properly and to remove the assertion in the selftest which triggers occasionally due to that. * Restructure struct tick_sched for better cache layout * Some small cleanups and a better cache layout for struct tick_sched - Implement the missing timer_wait_running() callback for POSIX CPU timers For unknown reason the introduction of the timer_wait_running() callback missed to fixup posix CPU timers, which went unnoticed for almost four years. While initially only targeted to prevent livelocks between a timer deletion and the timer expiry function on PREEMPT_RT enabled kernels, it turned out that fixing this for mainline is not as trivial as just implementing a stub similar to the hrtimer/timer callbacks. The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems there is a livelock issue independent of RT. CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers out from hard interrupt context to task work, which is handled before returning to user space or to a VM. The expiry mechanism moves the expired timers to a stack local list head with sighand lock held. Once sighand is dropped the task can be preempted and a task which wants to delete a timer will spin-wait until the expiry task is scheduled back in. In the worst case this will end up in a livelock when the preempting task and the expiry task are pinned on the same CPU. The timer wheel has a timer_wait_running() mechanism for RT, which uses a per CPU timer-base expiry lock which is held by the expiry code and the task waiting for the timer function to complete blocks on that lock. This does not work in the same way for posix CPU timers as there is no timer base and expiry for process wide timers can run on any task belonging to that process, but the concept of waiting on an expiry lock can be used too in a slightly different way. Add a per task mutex to struct posix_cputimers_work, let the expiry task hold it accross the expiry function and let the deleting task which waits for the expiry to complete block on the mutex. In the non-contended case this results in an extra mutex_lock()/unlock() pair on both sides. This avoids spin-waiting on a task which is scheduled out, prevents the livelock and cures the problem for RT and !RT systems * tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Implement the missing timer_wait_running callback selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity selftests/proc: Remove idle time monotonicity assertions MAINTAINERS: Remove stale email address timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick() timers/nohz: Add a comment about broken iowait counter update race timers/nohz: Protect idle/iowait sleep time under seqcount timers/nohz: Only ever update sleeptime from idle exit timers/nohz: Restructure and reshuffle struct tick_sched tick/common: Align tick period with the HZ tick. selftests/timers/posix_timers: Test delivery of signals across threads posix-timers: Prefer delivery of signals to the current thread vdso: Improve cmd_vdso_check to check all dynamic relocations
2023-04-25Merge tag 'x86_misc_for_v6.4_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: - Add a x86 hw vulnerabilities section to MAINTAINERS so that the folks involved in it can get CCed on patches - Add some more CPUID leafs to the kcpuid tool and extend its functionality to be more useful when grepping for CPUID bits * tag 'x86_misc_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add x86 hardware vulnerabilities section tools/x86/kcpuid: Dump the CPUID function in detailed view tools/x86/kcpuid: Update AMD leaf Fn80000001 tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007
2023-04-24Merge tag 'v6.4/kernel.user_worker' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull user work thread updates from Christian Brauner: "This contains the work generalizing the ability to create a kernel worker from a userspace process. Such user workers will run with the same credentials as the userspace process they were created from providing stronger security and accounting guarantees than the traditional override_creds() approach ever could've hoped for. The original work was heavily based and optimzed for the needs of io_uring which was the first user. However, as it quickly turned out the ability to create user workers inherting properties from a userspace process is generally useful. The vhost subsystem currently creates workers using the kthread api. The consequences of using the kthread api are that RLIMITs don't work correctly as they are inherited from khtreadd. This leads to bugs where more workers are created than would be allowed by the RLIMITs of the userspace process in lieu of which workers are created. Problems like this disappear with user workers created from the userspace processes for which they perform the work. In addition, providing this api allows vhost to remove additional complexity. For example, cgroup and mm sharing will just work out of the box with user workers based on the relevant userspace process instead of manually ensuring the correct cgroup and mm contexts are used. So the vhost subsystem should simply be made to use the same mechanism as io_uring. To this end the original mechanism used for create_io_thread() is generalized into user workers: - Introduce PF_USER_WORKER as a generic indicator that a given task is a user worker, i.e., a kernel task that was created from a userspace process. Now a PF_IO_WORKER thread is just a specialized version of PF_USER_WORKER. So io_uring io workers raise both flags. - Make copy_process() available to core kernel code - Extend struct kernel_clone_args with the following bitfields allowing to indicate to copy_process(): - to create a user worker (raise PF_USER_WORKER) - to not inherit any files from the userspace process - to ignore signals After all generic changes are in place the vhost subsystem implements a new dedicated vhost api based on user workers. Finally, vhost is switched to rely on the new api moving it off of kthreads. Thanks to Mike for sticking it out and making it through this rather arduous journey" * tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: vhost: use vhost_tasks for worker threads vhost: move worker thread fields to new struct vhost_task: Allow vhost layer to use copy_process fork: allow kernel code to call copy_process fork: Add kernel_clone_args flag to ignore signals fork: add kernel_clone_args flag to not dup/clone files fork/vm: Move common PF_IO_WORKER behavior to new flag kernel: Make io_thread and kthread bit fields kthread: Pass in the thread's name during creation kernel: Allow a kernel thread's name to be set in copy_process csky: Remove kernel_thread declaration
2023-04-24Merge tag 'docs-6.4' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "Commit volume in documentation is relatively low this time, but there is still a fair amount going on, including: - Reorganize the architecture-specific documentation under Documentation/arch This makes the structure match the source directory and helps to clean up the mess that is the top-level Documentation directory a bit. This work creates the new directory and moves x86 and most of the less-active architectures there. The current plan is to move the rest of the architectures in 6.5, with the patches going through the appropriate subsystem trees. - Some more Spanish translations and maintenance of the Italian translation - A new "Kernel contribution maturity model" document from Ted - A new tutorial on quickly building a trimmed kernel from Thorsten Plus the usual set of updates and fixes" * tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits) media: Adjust column width for pdfdocs media: Fix building pdfdocs docs: clk: add documentation to log which clocks have been disabled docs: trace: Fix typo in ftrace.rst Documentation/process: always CC responsible lists docs: kmemleak: adjust to config renaming ELF: document some de-facto PT_* ABI quirks Documentation: arm: remove stih415/stih416 related entries docs: turn off "smart quotes" in the HTML build Documentation: firmware: Clarify firmware path usage docs/mm: Physical Memory: Fix grammar Documentation: Add document for false sharing dma-api-howto: typo fix docs: move m68k architecture documentation under Documentation/arch/ docs: move parisc documentation under Documentation/arch/ docs: move ia64 architecture docs under Documentation/arch/ docs: Move arc architecture docs under Documentation/arch/ docs: move nios2 documentation under Documentation/arch/ docs: move openrisc documentation under Documentation/arch/ docs: move superh documentation under Documentation/arch/ ...
2023-04-24Merge tag 'rcu.6.4.april5.2023.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux Pull RCU updates from Joel Fernandes: - Updates and additions to MAINTAINERS files, with Boqun being added to the RCU entry and Zqiang being added as an RCU reviewer. I have also transitioned from reviewer to maintainer; however, Paul will be taking over sending RCU pull-requests for the next merge window. - Resolution of hotplug warning in nohz code, achieved by fixing cpu_is_hotpluggable() through interaction with the nohz subsystem. Tick dependency modifications by Zqiang, focusing on fixing usage of the TICK_DEP_BIT_RCU_EXP bitmask. - Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n kernels, fixed by Zqiang. - Improvements to rcu-tasks stall reporting by Neeraj. - Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for increased robustness, affecting several components like mac802154, drbd, vmw_vmci, tracing, and more. A report by Eric Dumazet showed that the API could be unknowingly used in an atomic context, so we'd rather make sure they know what they're asking for by being explicit: https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/ - Documentation updates, including corrections to spelling, clarifications in comments, and improvements to the srcu_size_state comments. - Better srcu_struct cache locality for readers, by adjusting the size of srcu_struct in support of SRCU usage by Christoph Hellwig. - Teach lockdep to detect deadlocks between srcu_read_lock() vs synchronize_srcu() contributed by Boqun. Previously lockdep could not detect such deadlocks, now it can. - Integration of rcutorture and rcu-related tools, targeted for v6.4 from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis module parameter, and more - Miscellaneous changes, various code cleanups and comment improvements * tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits) checkpatch: Error out if deprecated RCU API used mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep() rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep() ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep() net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep() net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep() lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep() tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep() misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep() drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep() rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan() rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early rcu: Remove never-set needwake assignment from rcu_report_qs_rdp() rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race rcu/trace: use strscpy() to instead of strncpy() tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem ...
2023-04-24Merge tag 'selinux-pr-20230420' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Stop passing the 'selinux_state' pointers as function arguments As discussed during the end of the last development cycle, passing a selinux_state pointer through the SELinux code has a noticeable impact on performance, and with the current code it is not strictly necessary. This simplifies things by referring directly to the single selinux_state global variable which should help improve SELinux performance. - Uninline the unlikely portions of avc_has_perm_noaudit() This change was also based on a discussion from the last development cycle, and is heavily based on an initial proof of concept patch from you. The core issue was that avc_has_perm_noaudit() was not able to be inlined, as intended, due to its size. We solved this issue by extracting the less frequently hit portions of avc_has_perm_noaudit() into a separate function, reducing the size of avc_has_perm_noaudit() to the point where the compiler began inlining the function. We also took the opportunity to clean up some ugly RCU locking in the code that became uglier with the change. - Remove the runtime disable functionality After several years of work by the userspace and distro folks, we are finally in a place where we feel comfortable removing the runtime disable functionality which we initially deprecated at the start of 2020. There is plenty of information in the kernel's deprecation (now removal) notice, but the main motivation was to be able to safely mark the LSM hook structures as '__ro_after_init'. LWN also wrote a good summary of the deprecation this morning which offers a more detailed history: https://lwn.net/SubscriberLink/927463/dcfa0d4ed2872f03 - Remove the checkreqprot functionality The original checkreqprot deprecation notice stated that the removal would happen no sooner than June 2021, which means this falls hard into the "better late than never" bucket. The Kconfig and deprecation notice has more detail on this setting, but the basic idea is that we want to ensure that the SELinux policy allows for the memory protections actually applied by the kernel, and not those requested by the process. While we haven't found anyone running a supported distro that is affected by this deprecation/removal, anyone who is affected would only need to update their policy to reflect the reality of their applications' mapping protections. - Minor Makefile improvements Some minor Makefile improvements to correct some dependency issues likely only ever seen by SELinux developers. I expect we will have at least one more tweak to the Makefile during the next merge window, but it didn't quite make the cutoff this time around. * tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: ensure av_permissions.h is built when needed selinux: fix Makefile dependencies of flask.h selinux: stop returning node from avc_insert() selinux: clean up dead code after removing runtime disable selinux: update the file list in MAINTAINERS selinux: remove the runtime disable functionality selinux: remove the 'checkreqprot' functionality selinux: stop passing selinux_state pointers and their offspring selinux: uninline unlikely parts of avc_has_perm_noaudit()
2023-04-24MAINTAINERS: Remove PPP maintainerPaul Mackerras
I am not currently maintaining the kernel PPP code, so remove my address from the MAINTAINERS entry for it. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-24MAINTAINERS: Remove rage128 framebuffer driver maintainerPaul Mackerras
I have not worked on this code for years, so remove my name as maintainer. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-04-23Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsetsNeeraj Sanjay Kale
This adds a driver based on serdev driver for the NXP BT serial protocol based on running H:4, which can enable the built-in Bluetooth device inside an NXP BT chip. This driver has Power Save feature that will put the chip into sleep state whenever there is no activity for 2000ms, and will be woken up when any activity is to be initiated over UART. This driver enables the power save feature by default by sending the vendor specific commands to the chip during setup. During setup, the driver checks if a FW is already running on the chip by waiting for the bootloader signature, and downloads device specific FW file into the chip over UART if bootloader signature is received.. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23dt-bindings: net: bluetooth: Add NXP bluetooth supportNeeraj Sanjay Kale
Add binding document for NXP bluetooth chipsets attached over UART. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-24MAINTAINERS: replace maintainer of FireWire subsystemTakashi Sakamoto
In the last few years, I have reviewed patches for FireWire subsystem and requested sound subsystem maintainer to sent them to mainline, since FireWire subsystem maintainer has been long absent. This situation is not preferable since we have some user of sound hardware in IEEE 1394 bus. I will stand for the maintainer, and work for FireWire core functions and 1394 OHCI driver, as well as sound drivers. This commit replaces the corresponding entry. As you know, IEEE 1394 is enough legacy. I would like to schedule the end of my work in the subsystem. My effort will last next 6 years. In 2026, I will start strong announcement for users to migrate their work load from IEEE 1394 bus (e.g. by purchasing alternative devices in USB and hardening system for them), then in 2029 let me resign the maintainer and close Linux 1394 project. My current work focuses on real time data (sampling data) transmission protocol in packet-oriented communication, thus I would provide less help to implementations for the other type of protocol; i.e. IPv4/IPv6 over IEEE 1394 bus (firewire-net), SCSI transport protocol over IEEE 1394 bus (firewire-sbp2) and iSCSI target (sbp-target). If receiving few objections from developers, I will start my work to send fixes for v6.3 prepatch, and PR for future v6.4 or later. I'm pleased if getting any help until the end. Reference: commit b32744751e75 ("firewire: add to MAINTAINERS") Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230306035814.78455-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2023-04-22MAINTAINERS: Add fragment for Xilinx watchdog driverSrinivas Neeli
Added entry for Xilinx xps-timebase watchdog driver. Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230420104231.2243079-2-srinivas.neeli@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-04-22drivers: watchdog: Add StarFive Watchdog driverXingyu Wu
Add watchdog driver for the StarFive JH7100 and JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230314132437.121534-3-xingyu.wu@starfivetech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-04-22watchdog: ebc-c384_wdt: Mark status as orphanedWilliam Breathitt Gray
The current maintainer no longer has access to the device for testing, the original user of this driver indicates that they have moved on to another device, and the manufacturer WINSYSTEMS does not appear interested in taking over support for this code. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230410150926.3354-1-william.gray@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21pds_core: Kconfig and pds_core.rstShannon Nelson
Remaining documentation and Kconfig hook for building the driver. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERSXuan Zhuo
First of all, I personally love open source, linux and virtio. I have also participated in community work such as virtio for a long time. I think I am familiar enough with virtio/virtio-net and is adequate as a reviewer. Every time there is some patch/bug, I wish I can get pinged and I will feedback on that. For me personally, being a reviewer is an honor and a responsibility, and it also makes it easier for me to participate in virtio-related work. And I will spend more time reviewing virtio patch. Better advance virtio development I had some contributions to virtio/virtio-net and some support for it. * per-queue reset * virtio-net xdp * some bug fix * ...... I make a humble request to grant the reviewer role for the virtio core and net drivers. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230413071610.43659-1-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21MAINTAINERS: add vringh.h to Virtio Core and Net DriversSimon Horman
vringh.h doesn't seem to belong to any section in MAINTAINERS. Add it to Virtio Core and Net Drivers, which seems to be the most appropriate section to me. Signed-off-by: Simon Horman <horms@kernel.org> Message-Id: <20230331-vhost-fixes-v1-3-1f046e735b9e@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-20gve: update MAINTAINERSJeroen de Borst
This reflects role changes in our team. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20230419210558.1893400-1-jeroendb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21MAINTAINERS: add Benno Lossin as Rust reviewerMiguel Ojeda
Benno has been involved with the Rust for Linux project for the better part of a year now. He has been working on solving the safe pinned initialization problem [1], which resulted in the pin-init API patch series [2] that allows to reduce the need for `unsafe` code in the kernel. He is also working on the field projection RFC for Rust [3] to bring pin-init as a language feature. His expertise with the language will be very useful to have around in the future if Rust grows within the kernel, thus add him to the `RUST` entry as reviewer. Link: https://rust-for-linux.com/the-safe-pinned-initialization-problem [1] Link: https://lore.kernel.org/rust-for-linux/20230408122429.1103522-1-y86-dev@protonmail.com/ [2] Link: https://github.com/rust-lang/rfcs/pull/3318 [3] Cc: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Alex Gaynor <alex.gaynor@gmail.com> Link: https://lore.kernel.org/r/20230412221823.830135-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-04-20Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.4. Major changes: wcn36xx * support for pronto v3 hardware ath11k * PCIe DeviceTree bindings * WCN6750: enable SAR support ath10k * convert DeviceTree bindings to YAML
2023-04-20kernel/configs: Drop Android config fragmentsJohn Stultz
In the old days where each device had a custom kernel, the android config fragments were useful to provide the required and reccomended options expected by userland. However, these days devices are expected to use the GKI kernel, so these config fragments no longer needed, and out of date, so they seem to only cause confusion. So lets drop them. If folks are curious what configs are expected by the Android environment, check out the gki_defconfig file in the latest android common kernel tree. Cc: Rob Herring <robh@kernel.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: <kernel-team@android.com> Signed-off-by: John Stultz <jstultz@google.com> Link: https://lore.kernel.org/r/20230411180409.1706067-1-jstultz@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20MAINTAINERS: w1: add Krzysztof Kozlowski as maintainerKrzysztof Kozlowski
Evgeniy wrote that he no longer takes patches for 1-Wire/W1 subsystem, so add Krzysztof Kozlowski to help reviewing and handling these. Link: https://lore.kernel.org/all/bdcf41d5-cd61-1e95-0b21-b8fe401644bd@ioremap.net/ Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230415093856.41948-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19ext4: Add a uapi header for ext4 userspace APIsJosh Triplett
Create a uapi header include/uapi/linux/ext4.h, move the ioctls and associated data structures to the uapi header, and include it from fs/ext4/ext4.h. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/680175260970d977d16b5cc7e7606483ec99eb63.1680402881.git.josh@joshtriplett.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-04-19net/handshake: Add a kernel API for requesting a TLSv1.3 handshakeChuck Lever
To enable kernel consumers of TLS to request a TLS handshake, add support to net/handshake/ to request a handshake upcall. This patch also acts as a template for adding handshake upcall support for other kernel transport layer security providers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19net/handshake: Create a NETLINK service for handling handshake requestsChuck Lever
When a kernel consumer needs a transport layer security session, it first needs a handshake to negotiate and establish a session. This negotiation can be done in user space via one of the several existing library implementations, or it can be done in the kernel. No in-kernel handshake implementations yet exist. In their absence, we add a netlink service that can: a. Notify a user space daemon that a handshake is needed. b. Once notified, the daemon calls the kernel back via this netlink service to get the handshake parameters, including an open socket on which to establish the session. c. Once the handshake is complete, the daemon reports the session status and other information via a second netlink operation. This operation marks that it is safe for the kernel to use the open socket and the security session established there. The notification service uses a multicast group. Each handshake mechanism (eg, tlshd) adopts its own group number so that the handshake services are completely independent of one another. The kernel can then tell via netlink_has_listeners() whether a handshake service is active and prepared to handle a handshake request. A new netlink operation, ACCEPT, acts like accept(2) in that it instantiates a file descriptor in the user space daemon's fd table. If this operation is successful, the reply carries the fd number, which can be treated as an open and ready file descriptor. While user space is performing the handshake, the kernel keeps its muddy paws off the open socket. A second new netlink operation, DONE, indicates that the user space daemon is finished with the socket and it is safe for the kernel to use again. The operation also indicates whether a session was established successfully. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19MAINTAINERS: Resume MPTCP co-maintainer roleMat Martineau
I'm returning to the MPTCP maintainer role I held for most of the subsytem's history. This time I'm using my kernel.org email address. Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/mptcp/af85e467-8d0a-4eba-b5f8-e2f2c5d24984@tessares.net/ Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230418231318.115331-1-martineau@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19dt-bindings: net: Convert ath10k to YAMLKonrad Dybcio
Convert the ath10k bindings to YAML. Dropped properties that are absent at the current state of mainline: - qcom,msi_addr - qcom,msi_base Somewhat based on the ath11k bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230406-topic-ath10k_bindings-v4-1-9f67a6bb0d56@linaro.org
2023-04-19hwmon: (sfctemp) Add StarFive JH71x0 temperature sensorEmil Renner Berthing
Add driver for the StarFive JH71x0 temperature sensor. You can enable/disable it and read temperature in milli Celcius through sysfs. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Co-developed-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20230321022644.107027-3-hal.feng@starfivetech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19MAINTAINERS: hwmon: drop Agathe PorteKrzysztof Kozlowski
Mails to Agathe Porte bounce ("550 5.4.1 Recipient address rejected: Access denied. AS(201806281)"). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230406204750.3017850-1-krzysztof.kozlowski@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19Merge tag 'coresight-next-v6.4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: Updates for v6.4 This is a relatively smaller update for CoreSight tracing subsystem targeting v6.4, with the following changes: - Removing Mathieu Poirier as MAINTAINER for the subsystem, with updates to CREDITS for his contributions. - Fix CoreSight ETM PMU to set the module field Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight: etm_pmu: Set the module field MAINTAINERS: Remove Mathieu Poirier as coresight maintainer
2023-04-18MAINTAINERS: Remove stale email addressFrederic Weisbecker
Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230222144649.624380-7-frederic@kernel.org
2023-04-18net: stmmac: Add glue layer for StarFive JH7110 SoCSamin Guo
This adds StarFive dwmac driver support on the StarFive JH7110 SoC. Tested-by: Tommaso Merciai <tomm.merciai@gmail.com> Co-developed-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-18dt-bindings: net: Add support StarFive dwmacYanhong Wang
Add documentation to describe StarFive dwmac driver(GMAC). Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-17dt-bindings: bus: Add Hyper-V VMBusSaurabh Sengar
Add dt-bindings for Hyper-V VMBus. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1679298460-11855-5-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17Merge tag 'thermal-v6.4-rc1-2' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano: "- Do preparating cleaning and DT bindings for RK3588 support (Sebastian Reichel) - Add driver support for RK3588 (Finley Xiao) - Use devm_reset_control_array_get_exclusive() for the Rockchip driver (Ye Xingchen) - Detect power gated thermal zones and return -EAGAIN when reading the temperature (Mikko Perttunen) - Remove thermal_bind_params structure as it is unused (Zhang Rui) - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob Herring) - Update the power allocator documentation according to the thermal trace relocation (Lukas Bulwahn) - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor (Chen-Yu Tsai) - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen) - Add AP domain support to LVTS thermal controllers for mt8195 (Balsam CHIHI) - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano) - Make thermal_of_zone_[un]register() private to the thermal OF code (Daniel Lezcano) - Create a private copy of the thermal zone device parameters structure when registering a thermal zone (Daniel Lezcano)" * tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/core: Alloc-copy-free the thermal zone parameters structure thermal/of: Unexport unused OF functions thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195 dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195 thermal: amlogic: Use dev_err_probe() thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement dt-bindings: thermal: Drop unneeded quotes thermal/core: Remove thermal_bind_params structure thermal/drivers/tegra-bpmp: Handle offline zones thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive() dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver thermal/drivers/rockchip: Support dynamic sized sensor array thermal/drivers/rockchip: Simplify channel id logic thermal/drivers/rockchip: Use dev_err_probe thermal/drivers/rockchip: Simplify clock logic thermal/drivers/rockchip: Simplify getting match data
2023-04-17MAINTAINERS: add git trees for MPTCPMatthieu Baerts
This will help occasional developers to find our git repo without having to look at our wiki. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17MAINTAINERS: drop uclinux.orgRandy Dunlap
uclinux.org is dead. Drop it from the MAINTAINERS file. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-04-16media: nxp: Add i.MX8 ISI driverLaurent Pinchart
The Image Sensing Interface (ISI) combines image processing pipelines with DMA engines to process and capture frames originating from a variety of sources. The inputs to the ISI go through Pixel Link interfaces, and their number and nature is SoC-dependent. They cover both capture interfaces (MIPI CSI-2 RX, HDMI RX) and memory inputs. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Tested-by: Adam Ford <aford173@gmail.com> #imx8mn-beacon Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused mt9t001 camera sensor driverLaurent Pinchart
The mt9t001 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.2. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused mt9m032 camera sensor driverLaurent Pinchart
The mt9m032 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.4. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused m5mols camera sensor driverLaurent Pinchart
The m5mols camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused ad9389b video encoder driverLaurent Pinchart
The ad9389b video encoder driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.7. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-14Merge tag 'qcom-arm64-for-6.4-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM64 Devicetree updated for v6.4 Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1 board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support for Xiaomi Mi A3 is introduced on SM6125. Support for the output-enable/disable flag is introduced in the pinctrl-msm driver, and the non-standard "input-enable" is dropped from a range of platforms. A wide range of smaller fixes are introduced, based on Devicetree validation. MSM8953 gains LPASS, MPSS and Wireless subsystem support. The iommus property is removed from PCIe nodes in all platforms, as the only the child devices should be associated with iommu groups, through the existing iommu-map property. A few QUP instances are introduced on the IPQ5332 platform, and support for the MI01.6 board is introduced. The reserved-memory map on Huawei Nexus 6P is updated with the addition of splash screen framebuffer memory and adjustment to the reserved memory region overlapping the smem region. Regulators are introduces for the SA8775P Ride platform. A regulator is marked always-on, for correctness, on Trogdor. Pinconf fixes are introduced to both sc7180 and sc7280 devices. A dedicated reviewers list is added for boards relevant to the Chromebook engineers. A set of pinconf fixes are introduced for sc8280xp, labels are introduced for Soundwire nodes. The sensor core remoteproc and FastRPC thereon, is introduce in SDM845 and enabled for OnePlus 6/6T and Shift Shift6mq. RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab P11. UFS support is introduced on SM6125. SM8150 no longer defines the GPU to be in headless mode by default, GPU speedbins are introduced. GPU speedbins are introduced for SM8250 as well, as is support for display on Xiaomi Mi Pad 5 Pro, with two different panels supported. Soundwire controllers, ADSP audio codec macros and the Inline Crypto Engine support is added to the SM8550 platform. * tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits) arm64: dts: qcom: Add base qrb4210-rb2 board dts arm64: dts: qcom: sm8550: add Soundwire controllers arm64: dts: qcom: sm8250: Add GPU speedbin support arm64: dts: qcom: sm8150: Add GPU speedbin support arm64: dts: qcom: sm8150: Don't start Adreno in headless mode arm64: dts: qcom: ipq5332: add support for the RDP468 variant arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs arm64: dts: qcom: sm6115: Add RMTFS arm64: dts: qcom: sm6115-j606f: Add ramoops node arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node arm64: dts: MSM8953: Add lpass nodes arm64: dts: MSM8953: Add mpss nodes arm64: dts: MSM8953: Add wcnss nodes arm64: dts: qcom: sm8350: remove superfluous "input-enable" arm64: dts: qcom: sm8150: remove superfluous "input-enable" arm64: dts: qcom: apq8016: remove superfluous "input-enable" arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength ... Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'renesas-drivers-for-v6.4-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers Renesas driver updates for v6.4 (take two) - Add "renesas," file contents pattern to MAINTAINERS, - Fix a small leak on OOM. * tag 'renesas-drivers-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: renesas-soc: Release 'chipid' from ioremap() MAINTAINERS: renesas: Add "renesas," file contents pattern Link: https://lore.kernel.org/r/cover.1681113115.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14MAINTAINERS: Remove Mathieu Poirier as coresight maintainerSuzuki K Poulose
Mathieu Poirier is no longer involved in maintainig the CoreSight self-hosted tracing subsystem. Mathieu, Thank you very much creating and maintaing the subsystem all these years ! Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20230404111117.569795-1-suzuki.poulose@arm.com
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 04:00:32 +0000