summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2020-09-29Merge tag 'devicetree-fixes-for-5.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix handling of HOST_EXTRACFLAGS for dtc - Several warning fixes for DT bindings * tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting dt-bindings: Fix 'reg' size issues in zynqmp examples ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding dt-bindings: crypto: sa2ul: fix a DT binding check warning
2020-09-28ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfdMaxime Ripard
The current binding for the RPi firmware uses the simple-bus compatible as a fallback to benefit from its automatic probing of child nodes. However, simple-bus also comes with some constraints, like having the ranges, our case. Let's switch to simple-mfd that provides the same probing logic without those constraints. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech Signed-off-by: Rob Herring <robh@kernel.org>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from Jakub Kicinski: - fix failure to add bond interfaces to a bridge, the offload-handling code was too defensive there and recent refactoring unearthed that. Users complained (Ido) - fix unnecessarily reflecting ECN bits within TOS values / QoS marking in TCP ACK and reset packets (Wei) - fix a deadlock with bpf iterator. Hopefully we're in the clear on this front now... (Yonghong) - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel) - fix AQL on mt76 devices with FW rate control and add a couple of AQL issues in mac80211 code (Felix) - fix authentication issue with mwifiex (Maximilian) - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro) - fix exception handling for multipath routes via same device (David Ahern) - revert back to a BH spin lock flavor for nsid_lock: there are paths which do require the BH context protection (Taehee) - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke) - fix ife module load deadlock (Cong) - make an adjustment to netlink reply message type for code added in this release (the sole change touching uAPI here) (Michal) - a number of fixes for small NXP and Microchip switches (Vladimir) [ Pull request acked by David: "you can expect more of this in the future as I try to delegate more things to Jakub" ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits) net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU net: Update MAINTAINERS for MediaTek switch driver net/mlx5e: mlx5e_fec_in_caps() returns a boolean net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock net/mlx5e: kTLS, Fix leak on resync error flow net/mlx5e: kTLS, Add missing dma_unmap in RX resync net/mlx5e: kTLS, Fix napi sync and possible use-after-free net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() net/mlx5e: Fix multicast counter not up-to-date in "ip -s" net/mlx5e: Fix endianness when calculating pedit mask first bit net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported net/mlx5e: CT: Fix freeing ct_label mapping net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready net/mlx5e: Use synchronize_rcu to sync with NAPI net/mlx5e: Use RCU to protect rq->xdp_prog ...
2020-09-13Merge tag 'arm-soc/for-5.9/devicetree-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.9, please pull the following: - Florian fixes the Broadcom QSPI controller binding such that the most specific compatible string is the left most one, and all existing in-tree users are updated as well. * tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13Merge tag 'imx-fixes-5.9-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9, round 2: - Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node. - Correct 'ahb' clock for i.MX8MP SDMA1 in device tree. - Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX. * tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property Link: https://lore.kernel.org/r/20200909143844.GA25109@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13Merge tag 'omap-for-v5.9/fixes-rc3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.9-rc cycle Few fixes for omap based devices: - Fix of_clk_get() error handling for omap-iommu - Fix missing audio pinctrl entries for logicpd boards - Fix video for logicpd-som-lv after switch to generic panels - Fix omap5 DSI clocks base * tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Fix DSI base address and clocks ARM: dts: logicpd-som-lv-baseboard: Fix missing video ARM: dts: logicpd-som-lv-baseboard: Fix broken audio ARM: dts: logicpd-torpedo-baseboard: Fix broken audio ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-10net: dsa: microchip: look for phy-mode in port nodesHelmut Grohne
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/ Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09ARM: dts: BCM5301X: Fixed QSPI compatible stringFlorian Fainelli
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-09ARM: dts: NSP: Fixed QSPI compatible stringFlorian Fainelli
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-09ARM: dts: bcm: HR2: Fixed QSPI compatible stringFlorian Fainelli
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-05ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3Fugang Duan
The pad QSPI1B_SCLK mux mode 0x1 is for function UART3_DTE_TX, correct the mux mode. Fixes: 743636f25f1d ("ARM: dts: imx: add pin function header for imx6sx") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-24Merge tag 'imx-fixes-5.9' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9: - Fix QuadSPI-memory 'reg' for LS1021A and GPIO 'ranges' for i.MX7ULP pinctrl. - A couple of DTC warning fixes on imx6qdl-gw51xx and imx6q-prtwd2 boards. - Add missing imx8mm-beacon-kit.dtb to dtbs-y for build coverage. - Fix broken PWM settings on imx6q-logicpd board. - Add missing syscon compatible to OCOTP device, so that access to UID is possible. - Fix a network regression on imx7d-zii-rmu2 due to a phy-mode mismatch. * tag 'imx-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy ARM: dts: vfxxx: Add syscon compatible with OCOTP ARM: dts: imx6q-logicpd: Fix broken PWM arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells ARM: dts: imx7ulp: Correct gpio ranges ARM: dts: ls1021a: fix QuadSPI-memory reg range Link: https://lore.kernel.org/r/20200824130359.GF12776@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-24ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phyChris Healy
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on the imx7d-zii-rmu2 board. The end result is that network receive behaviour is marginal with lots of RX CRC errors experienced and NFS frequently failing. Quoting the explanation from Andrew Lunn in commit 0672d22a19244 ("ARM: dts: imx: Fix the AR803X phy-mode"): "The problem here is, all the DTs were broken since day 0. However, because the PHY driver was also broken, nobody noticed and it worked. Now that the PHY driver has been fixed, all the bugs in the DTs now become an issue" Fix it by switching to phy-mode = "rgmii-id". Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-23ARM: dts: vfxxx: Add syscon compatible with OCOTPChris Healy
Add syscon compatibility with Vybrid OCOTP node. This is required to access the UID. Fixes: fa8d20c8dbb77 ("ARM: dts: vfxxx: Add node corresponding to OCOTP") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-23ARM: dts: imx6q-logicpd: Fix broken PWMAdam Ford
The DTC doesn't like the default PWM settings, because it's expecting three cells. This patch reduces adds the extra entry of 0 to the PWM reference. Fixes: fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files") Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-23ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit nameFabio Estevam
The following dtc warning is seen when building with W=1: arch/arm/boot/dts/imx6q-prtwd2.dts:33.8-43.4: Warning (unit_address_vs_reg): /i2c@4: node has a unit name, but no reg or ranges property Remove the unneeded i2c unit name to fix the issue. Fixes: 88010b8174ab ("ARM: dts: add Protonic WD2 board") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-23ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cellsFabio Estevam
The following dtc warning is seen when building with W=1: arch/arm/boot/dts/imx6qdl-gw51xx.dtsi:23.12-68.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Remove the unneeded #address-cells/#size-cells properties to fix the issue. Fixes: 64bf0a0af18d ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-22ARM: dts: imx7ulp: Correct gpio rangesAnson Huang
Correct gpio ranges according to i.MX7ULP pinctrl driver: gpio_ptc: ONLY pin 0~19 are available; gpio_ptd: ONLY pin 0~11 are available; gpio_pte: ONLY pin 0~15 are available; gpio_ptf: ONLY pin 0~19 are available; Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-22ARM: dts: ls1021a: fix QuadSPI-memory reg rangeMatthias Schiffer
According to the Reference Manual, the correct size is 512 MiB. Without this fix, probing the QSPI fails: fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed fsl-quadspi: probe of 1550000.spi failed with error -12 Fixes: 85f8ee78ab72 ("ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-19ARM: dts: omap5: Fix DSI base address and clocksDavid Shah
DSI was not probing due to base address off by 0x1000, and sys_clk missing. With this patch, the Pyra display works if HDMI is disabled in the device tree. Fixes: 5a507162f096 ("ARM: dts: Configure interconnect target module for omap5 dsi1") Signed-off-by: David Shah <dave@ds0.me> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> [tony@atomide.com: standardized subject line, added fixes tag] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-08-17ARM: dts: socfpga: fix register entry for timer3 on Arria10Dinh Nguyen
Fixes the register address for the timer3 entry on Arria10. Fixes: 475dc86d08de4 ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-08-17ARM: dts: logicpd-som-lv-baseboard: Fix missing videoAdam Ford
A previous commit removed the panel-dpi driver, which made the SOM-LV video stop working because it relied on the DPI driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the SOM-LV dev kits to use a similar panel and remove the manual timing requirements. A similar patch was already done and applied to the Torpedo family. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-08-17ARM: dts: logicpd-som-lv-baseboard: Fix broken audioAdam Ford
Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree but never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 5cb8b0fa55a9 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-08-17ARM: dts: logicpd-torpedo-baseboard: Fix broken audioAdam Ford
Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree, they were never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 739f85bba5ab ("ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-08-09Merge tag 'pinctrl-v5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
2020-08-06Merge tag 'sound-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became wide and scattered updates all over the sound tree as diffstat shows: lots of (still ongoing) refactoring works in ASoC, fixes and cleanups caught by static analysis, inclusive term conversions as well as lots of new drivers. Below are highlights: ASoC core: - API cleanups and conversions to the unified mute_stream() call - Simplify I/O helper functions - Use helper macros to retrieve RTD from substreams ASoC drivers: - Lots of fixes and cleanups in Intel ASoC drivers - Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S, Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards, nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries boards, TI J721e EVM ALSA core: - Minor code refacotring for SG-buffer handling HD-audio: - Generalization of mute-LED handling with LED classdev - Intel silent stream support for HDMI - Device-specific fixes: CA0132, Loongson-3 Others: - Usual USB- and HD-audio quirks for various devices - Fixes for echoaudio DMA position handling - Various documents and trivial fixes for sparse warnings - Conversion to adopt inclusive terms" * tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (479 commits) ALSA: pci: delete repeated words in comments ALSA: isa: delete repeated words in comments ALSA: hda/tegra: Add 100us dma stop delay ALSA: hda: Add dma stop delay variable ASoC: hda/tegra: Set buffer alignment to 128 bytes ALSA: seq: oss: Serialize ioctls ALSA: hda/hdmi: Add quirk to force connectivity ALSA: usb-audio: add startech usb audio dock name ALSA: usb-audio: Add support for Lenovo ThinkStation P620 Revert "ALSA: hda: call runtime_allow() for all hda controllers" ALSA: hda/ca0132 - Fix AE-5 microphone selection commands. ALSA: hda/ca0132 - Add new quirk ID for Recon3D. ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value. ALSA: hda/realtek: Add alc269/alc662 pin-tables for Loongson-3 laptops ALSA: docs: fix typo ALSA: doc: use correct config variable name ASoC: core: Two step component registration ASoC: core: Simplify snd_soc_component_initialize declaration ASoC: core: Relocate and expose snd_soc_component_initialize ASoC: sh: Replace 'select' DMADEVICES 'with depends on' ...
2020-08-04Merge tag 'timers-core-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Time, timers and related driver updates: - Prevent unnecessary timer softirq invocations by extending the tracking of the next expiring timer in the timer wheel beyond the existing NOHZ functionality. The tracking overhead at enqueue time is within the noise, but on sensitive workloads the avoidance of the soft interrupt invocation is a measurable improvement. - The obligatory new clocksource driver for Ingenic X100 OST - The usual fixes, improvements, cleanups and extensions for newer chip variants all over the driver space" * tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) timers: Recalculate next timer interrupt only when necessary clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST. dt-bindings: timer: Add Ingenic X1000 OST bindings. clocksource/drivers: Replace HTTP links with HTTPS ones clocksource/drivers/nomadik-mtu: Handle 32kHz clock clocksource/drivers/sh_cmt: Use "kHz" for kilohertz clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64 clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT. timers: Lower base clock forwarding threshold timers: Remove must_forward_clk timers: Spare timer softirq until next expiry timers: Expand clk forward logic beyond nohz timers: Reuse next expiry cache after nohz exit timers: Always keep track of next expiry timers: Optimize _next_timer_interrupt() level iteration timers: Add comments about calc_index() ceiling work timers: Move trigger_dyntick_cpu() to enqueue_timer() timers: Use only bucket expiry for base->next_expiry value timers: Preserve higher bits of expiration on index calculation clocksource/drivers/timer-atmel-tcb: Add sama5d2 support ...
2020-08-03Merge tag 'arm-newsoc-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are three SoC families newly dded to the 32-bit and 64-bit Arm architecture code in the kernel this time: - Daniel Palmer adds initial support for two chips made by MStar, a taiwanese SoC manufacturer that became part of Mediatek in 2012. For now, the added support is fairly minimal, with just two of its Cortex-A7 based 32-bit camera chips getting support for a limited set of on-chip peripherals. - Lars Povlsen from Microchip adds support for their new Sparx5 family of ethernet switch chips using 64-bit Cortex-A53 cores. These are descended from earlier VSC7xxx SparX and Ocelot chips using 32-bit MIPS cores. - Daniele Alessandrelli from Intel adds support for the new Keem Bay SoC for computer vision, built around a Movidius VPU with Linux running on Arm Cortex-A53 cores" * tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: mstar: Correct the compatible string for pmsleep dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep ARM: mstar: Add reboot support ARM: mstar: Add "pmsleep" node to base dtsi ARM: mstar: Add PMU ARM: mstar: Adjust IMI size for infinity3 ARM: mstar: Adjust IMI size for mercury5 ARM: mstar: Adjust IMI size of infinity ARM: mstar: Add IMI SRAM region dt-bindings: arm: mstar: Move existing MStar binding descriptions dt-bindings: arm: mstar: Add binding details for mstar, pmsleep ARM: mstar: Fix dts filename for 70mai midrive d08 ARM: mstar: Add dts for 70mai midrive d08 ARM: mstar: Add dts for msc313(e) based BreadBee boards ARM: mstar: Add mercury5 series dtsis ARM: mstar: Add infinity/infinity3 family dtsis ARM: mstar: Add Armv7 base dtsi ARM: mstar: Add binding details for mstar,l3bridge ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs ...
2020-08-03Merge tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC updates from Arnd Bergmann: "These are mostly cosmetic changes and minor bugfixes for the SoC specific code, across the 32-bit at91, mvebu, davinci, samsung, and omap platforms. The main notable changes are for the Samsung Exynos platform, which sees a rewrite of gpio handling and a change to restore and adds a workaround for a problem with cpuidle support" * tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh() MAINTAINERS: arm/amlogic: add designated reviewers ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()' ARM: davinci: Fix trivial spelling ARM: davinci: Replace HTTP links with HTTPS ones ARM: s3c24xx: Replace HTTP links with HTTPS ones ARM: orion/gpio: Make use of for_each_requested_gpio() ARM: at91: Replace HTTP links with HTTPS ones ARM: at91: pm: add missing put_device() call in at91_pm_sram_init() ARM: rpc: Change blacklist to quirklist in ecode.c file ARM: OMAP: Replace HTTP links with HTTPS ones ARM: s3c24xx: leds: Convert to use GPIO descriptors udc: lpc32xx: mark local function static ARM: exynos: MCPM: Restore big.LITTLE cpuidle support ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val
2020-08-03Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, there are many patches addressing minor issues in existing DTS files, such as DTC warnings, or adding support for additional peripherals. There are three added SoCs in existing product families: - Amazon: Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs, otherwise known as AL73400 or first-generation Graviton, and following the already supported Cortex-A1`5 and Cortex-A57 based Alpine chips. This one is added together with the official Evaluation platform. - Qualcomm: The Snapdragon SDM630 platform is a family of mid-range mobile phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total of five end-user products are added based on these, all Android phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra. - Renesas: RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G family, and apparently closely related to the RZ/G2N and RZ/G2M models we already support but has a faster GPU and additional on-chip peripherals. It is added along with the HopeRun HiHope RZ/G2H development board A small number of new boards for already supported SoCs also debut: - Allwinner sunxi: Only one new machine, revision v1.2 of the Pine64 PinePhone (non-Android) smartphone, containing minor changes compared to earlier versions. - Amlogic Meson: WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box - Aspeed: EthanolX is AMD's EPYC data center rerence platform, using an ASpeed AST2600 baseboard management controller. - Mediatek: Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based on the MT8183 (Helio P60t) SoC. - Nvidia Tegra: ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android tablets from around 2012 using Tegra 3 and Tegra 2, respectively. Thanks to PostmarketOS, these can now run mainline kernels and become useful again. The Jetson Xavier NX Developer Kit uses a SoM and carrier board for the Tegra194, their latest 64-bit chip based on Carmel CPU cores and Volta graphics. - NXP i.MX: Five new boards based on the 32-bit i.MX6 series are added: The MYiR MYS-6ULX single-board computer, and four different models of industrial computers from Protonic. - Qualcomm: MikroTik RouterBoard 3011 is a rackmounted router based on the 32-bit IPQ8064 networking SoC Three older phones get added, the Snapdragon 808 (msm8992) based Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia Z5. - Renesas: In addition to the HiHope RZ/G2H board mentioned above, we gain support for board versions 3.0 and 4.0 of the earlier RZ/G2M and RZ/G2N reference boards. Beacon EmbeddedWorks adds another SoM+Carrier development board for RZ/G2M. - Rockchips: Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is based on, using the high-end 32-bit rk3288 SoC. Notable updates to existing platforms are usually for added on-chip peripherals, including: - ASpeed AST2xxx (various) - Allwinner (cpufreq, thermal, Pinephone touchscreen) - Amlogic Meson (audio, gpu dvdfs, board updates) - Arm Versatile - Broadcom (board updates for switch ports, Raspberry pi clock updates) - Hisilicon (various) - Intel/Altera SoCFPGA (various) - Marvell Armada 7xxx/8xxx (smmu) - Marvell MMP (GPU on mmp2/mmp3) - Mediatek mt8183 (USB, pericfg) - NXP Layerscape (VPU, thermal, DSPI) - NXP i.MX (VPU, bindings, board updates) - Nvidia Tegra194 (GPU) - Qualcomm (GPU, Interconnect, ...) - Renesas R-Car (SPI, IPMMU, board updates) - STMicroelectronics STM32 (various) - Samsung Exynos (various) - Socionext Uniphier (updates to serial, and pcie) - TI K3 (serdes, usb3, audio, sd, chipid) - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)" * tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits) arm64: dts: meson: odroid-n2: add jack audio output support arm64: dts: meson: odroid-n2: enable audio loopback ARM: dts: berlin: Align L2 cache-controller nodename with dtschema arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree arm64: dts: qcom: msm8992: Add RPMCC node arm64: dts: qcom: msm8992: Add PSCI support. arm64: dts: qcom: msm8992: Add PMU node arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device arm64: dts: qcom: msm8992: Add a SCM node arm64: dts: qcom: msm8992: Add a proper CPU map arm64: dts: qcom: bullhead: Move UART pinctrl to SoC arm64: dts: qcom: bullhead: Add qcom,msm-id arm64: dts: qcom: msm8992: Fix SDHCI1 arm64: dts: qcom: msm8992: Modernize the DTS style arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead. arm64: dts: qcom: msm8994: Add support for SMD RPM arm64: dts: qcom: msm8992: Add a label to rpm-requests ...
2020-07-31Merge remote-tracking branch 'asoc/for-5.9' into asoc-nextMark Brown
2020-07-31ARM: mstar: Correct the compatible string for pmsleepDaniel Palmer
The compatible string for the pmsleep region has changed. Update the MStar/Sigmastar v7 base dtsi with the new string. Link: https://lore.kernel.org/r/20200729150748.1945589-4-daniel@0x0f.com Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-31Merge tag 'socfpga_update_for_v5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/soc SoCFPGA update for v5.9, part 2 - Add missing put_device() call in socfpga base power management support * tag 'socfpga_update_for_v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh() ARM: dts: socfpga: add the temperature sensor to the Arria10 devkit arm: dts: socfpga: add reset-names to spi node arm64: dts: agilex: add nand clocks arm64: dts: agilex: populate clock dts entries for Intel SoCFPGA Agilex Link: https://lore.kernel.org/r/20200729165037.3099-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28Merge tag 'arm-fixes-5.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC DT fixes from Arnd Bergmann: "These are the latest device tree fixes for Arm SoCs: - TI Keystone2 ethernet regressed after a driver change broke with incorrect phy-mode in a board's DT source. - A similar fix is needed for two i.MX boards that were missed in an earlier bugfix. - DT change for Armada 38x allowing to add the register needed to fix NETA lockup when repeatedly switching speed. - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card detect work correctly. - Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6" * tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2 ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2 arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range
2020-07-28ARM: mstar: Add reboot supportDaniel Palmer
MStar v7 SoCs support reset by writing a magic value to a register in the "pmsleep" area. This adds a node for using the syscon reboot driver to trigger a reset. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add "pmsleep" node to base dtsiDaniel Palmer
This patch adds a node for the pmsleep area so that other drivers can access registers contained within it. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add PMUDaniel Palmer
Adds the ARM PMU to the base MStar v7 dtsi. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Adjust IMI size for infinity3Daniel Palmer
infinity3 has 128KB of SRAM at the IMI region. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Adjust IMI size for mercury5Daniel Palmer
mercury5 family chips have 128KB of SRAM in the IMI region. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Adjust IMI size of infinityDaniel Palmer
infinity has 88KB of SRAM at the IMI region. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add IMI SRAM regionDaniel Palmer
All MStar v7 SoCs have an internal SRAM region that is between 64KB (infinity2m) and 128KB(infinity3, mercury5). The region is always at the same base address and is used for the second stage loader (MStar IPL or u-boot SPL) and will be used for the DDR self-refresh entry code within the kernel eventually. This patch adds a 128KB region to the SoC and the minimum 64KB SRAM region to the base dtsi. Families with more SRAM will override the size in their family level dtsi. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Fix dts filename for 70mai midrive d08Daniel Palmer
Fixes the filename for the 70mai midrive d08 dts. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add dts for 70mai midrive d08Daniel Palmer
Adds initial support for the 70mai midrive d08 dash camera. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add dts for msc313(e) based BreadBee boardsDaniel Palmer
BreadBee is an opensource development board based on the MStar msc313(e) SoC. Hardware details, schematics and so on can be found at: https://github.com/breadbee/breadbee Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add mercury5 series dtsisDaniel Palmer
This adds a family level dtsi for the mercury5 and then a chip level dtsi for the ssc8336n chip. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add infinity/infinity3 family dtsisDaniel Palmer
This adds two family level dtsis for the infinity and infinity3 and then adds a chip level dtsi each for a chip in those families. infinity3.dtsi includes infinity.dtsi as these SoCs share most of their memory map and we would have a lot of duplication otherwise. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add Armv7 base dtsiDaniel Palmer
Adds initial dtsi for the base MStar/Sigmastar Armv7 SoCs. These SoCs have very similar memory maps and this will avoid duplicating nodes across multiple dtsis. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: dts: berlin: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski
Fix dtschema validator warnings like: l2-cache-controller@ac0000: $nodename:0: 'l2-cache-controller@ac0000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200626080642.4244-1-krzk@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28Merge tag 'aspeed-5.9-devicetree' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.9 There is one new machine; AMD's EthanolX reference platform with an AST2600 BMC. Misc updates for Rainier, Tacoma, Wedge and Mihawk machines. * tag 'aspeed-5.9-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (26 commits) ARM: dts: Aspeed: tacoma: Enable EHCI controller ARM: dts: aspeed: rainier: Enable EHCI controller ARM: dts: aspeed: rainier: Switch OCCs to P10 ARM: dts: aspeed: rainier: Add FSI I2C masters ARM: dts: aspeed: rainier: Add CFAM SPI controllers ARM: dts: aspeed: rainier: Add I2C buses for NVMe use ARM: dts: aspeed: Initial device tree for AMD EthanolX ARM: dts: rainier: Describe GPIO mux on I2C3 ARM: dts: aspeed: wedge40: Enable pwm_tacho device ARM: dts: aspeed: wedge40: Enable ADC device ARM: dts: aspeed: wedge40: Disable unused i2c controllers ARM: dts: aspeed: cmm: Fixup I2C tree ARM: dts: aspeed: tacoma: Add CFAM reset GPIO ARM: dts: aspeed: rainier: Add CFAM reset GPIO ARM: dts: aspeed: tacoma: Fix gpio-key definitions ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP ARM: dts: aspeed: rainier: Add second cfam on the hub ARM: dts: aspeed: rainier: Add line-name checkstop ARM: dts: aspeed: tacoma: Remove checkstop gpio-key ARM: dts: aspeed: tacoma: Enable XDMA engine ... Link: https://lore.kernel.org/r/CACPK8Xf_Np7LtcDFhywi6Uk1EgUpb0pVVa+Lr9YEwBRjbjOKCQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: dts: Aspeed: tacoma: Enable EHCI controllerEddie James
Enable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port. The power control is in place to allow the port to be disabled, for those that are worried about rogue USB sticks. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>