| Age | Commit message (Collapse) | Author |
|---|
|
On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT
is enabled).
We can't assume that the grant frame base address will always fits in an
unsigned long. Use phys_addr_t instead of unsigned long as argument for
gnttab_setup_auto_xlat_frames.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
|
|
Event channels driver needs to be initialized very early. Until now, Xen
initialization was done after all CPUs was bring up.
We can safely move the initialization to an early initcall.
Also use a cpu notifier to:
- Register the VCPU when the CPU is prepared
- Enable event channel IRQ when the CPU is running
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
The 'xen_hvm_resume_frames' used to be an 'unsigned long'
and contain the virtual address of the grants. That was OK
for most architectures (PVHVM, ARM) were the grants are contiguous
in memory. That however is not the case for PVH - in which case
we will have to do a lookup for each virtual address for the PFN.
Instead of doing that, lets make it a structure which will contain
the array of PFNs, the virtual address and the count of said PFNs.
Also provide a generic functions: gnttab_setup_auto_xlat_frames and
gnttab_free_auto_xlat_frames to populate said structure with
appropriate values for PVHVM and ARM.
To round it off, change the name from 'xen_hvm_resume_frames' to
a more descriptive one - 'xen_auto_xlat_grant_frames'.
For PVH, in patch "xen/pvh: Piggyback on PVHVM for grant driver"
we will populate the 'xen_auto_xlat_grant_frames' by ourselves.
v2 moves the xen_remap in the gnttab_setup_auto_xlat_frames
and also introduces xen_unmap for gnttab_free_auto_xlat_frames.
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v3: Based on top of 'asm/xen/page.h: remove redundant semicolon']
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
These mappings are in fact special and require special handling in privcmd,
which already exists. Failure to mark the PTE as special on arm64 causes all
sorts of bad PTE fun. e.g.
e.g.:
BUG: Bad page map in process xl pte:e0004077b33f53 pmd:4079575003
page:ffffffbce1a2f328 count:1 mapcount:-1 mapping: (null) index:0x0
page flags: 0x4000000000000014(referenced|dirty)
addr:0000007fb5259000 vm_flags:040644fa anon_vma: (null) mapping:ffffffc03a6fda58 index:0
vma->vm_ops->fault: privcmd_fault+0x0/0x38
vma->vm_file->f_op->mmap: privcmd_mmap+0x0/0x2c
CPU: 0 PID: 2657 Comm: xl Not tainted 3.12.0+ #102
Call trace:
[<ffffffc0000880f8>] dump_backtrace+0x0/0x12c
[<ffffffc000088238>] show_stack+0x14/0x1c
[<ffffffc0004b67e0>] dump_stack+0x70/0x90
[<ffffffc000125690>] print_bad_pte+0x12c/0x1bc
[<ffffffc0001268f4>] unmap_single_vma+0x4cc/0x700
[<ffffffc0001273b4>] unmap_vmas+0x68/0xb4
[<ffffffc00012c050>] unmap_region+0xcc/0x1d4
[<ffffffc00012df20>] do_munmap+0x218/0x314
[<ffffffc00012e060>] vm_munmap+0x44/0x64
[<ffffffc00012ed78>] SyS_munmap+0x24/0x34
Where unmap_single_vma contains inlined -> unmap_page_range -> zap_pud_range
-> zap_pmd_range -> zap_pte_range -> print_bad_pte.
Or:
BUG: Bad page state in process xl pfn:4077b4d
page:ffffffbce1a2f8d8 count:0 mapcount:-1 mapping: (null) index:0x0
page flags: 0x4000000000000014(referenced|dirty)
Modules linked in:
CPU: 0 PID: 2657 Comm: xl Tainted: G B 3.12.0+ #102
Call trace:
[<ffffffc0000880f8>] dump_backtrace+0x0/0x12c
[<ffffffc000088238>] show_stack+0x14/0x1c
[<ffffffc0004b67e0>] dump_stack+0x70/0x90
[<ffffffc00010f798>] bad_page+0xc4/0x110
[<ffffffc00010f8b4>] free_pages_prepare+0xd0/0xd8
[<ffffffc000110e94>] free_hot_cold_page+0x28/0x178
[<ffffffc000111460>] free_hot_cold_page_list+0x38/0x60
[<ffffffc000114cf0>] release_pages+0x190/0x1dc
[<ffffffc00012c0e0>] unmap_region+0x15c/0x1d4
[<ffffffc00012df20>] do_munmap+0x218/0x314
[<ffffffc00012e060>] vm_munmap+0x44/0x64
[<ffffffc00012ed78>] SyS_munmap+0x24/0x34
x86 already gets this correct. 32-bit arm gets away with this because there is
not PTE_SPECIAL bit in the PTE there and the vm_normal_page fallback path does
the right thing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
From: Eric Trudeau <etrudeau@broadcom.com>
xen_hvm_resume_frames stores the physical address of the grant table.
englighten.c was incorrectly setting it as if it was a page frame number.
This caused the table to be mapped into the guest at an unexpected physical
address.
Additionally, a warning is improved to include the grant table address which
failed in xen_remap.
Signed-off-by: Eric Trudeau <etrudeau@broadcom.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Various xen drivers fail to link when built as modules with the following
error:
ERROR: "phys_to_mach" [drivers/xen/xen-gntalloc.ko] undefined!
ERROR: "phys_to_mach" [drivers/net/xen-netfront.ko] undefined!
ERROR: "phys_to_mach" [drivers/net/xen-netback/xen-netback.ko] undefined!
ERROR: "phys_to_mach" [drivers/block/xen-blkfront.ko] undefined!
The mfn_to_pfn and pfn_to_mfn functions get inlined in these modules and
those functions require phys_to_mach. Export the symbol to fix the link
errors.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
stable/for-linus-3.13
* stefano/swiotlb-xen-9.1:
swiotlb-xen: fix error code returned by xen_swiotlb_map_sg_attrs
swiotlb-xen: static inline xen_phys_to_bus, xen_bus_to_phys, xen_virt_to_bus and range_straddles_page_boundary
grant-table: call set_phys_to_machine after mapping grant refs
arm,arm64: do not always merge biovec if we are running on Xen
swiotlb: print a warning when the swiotlb is full
swiotlb-xen: use xen_dma_map/unmap_page, xen_dma_sync_single_for_cpu/device
xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/device
swiotlb-xen: use xen_alloc/free_coherent_pages
xen: introduce xen_alloc/free_coherent_pages
arm64/xen: get_dma_ops: return xen_dma_ops if we are running as xen_initial_domain
arm/xen: get_dma_ops: return xen_dma_ops if we are running as xen_initial_domain
swiotlb-xen: introduce xen_swiotlb_set_dma_mask
xen/arm,arm64: enable SWIOTLB_XEN
xen: make xen_create_contiguous_region return the dma address
xen/x86: allow __set_phys_to_machine for autotranslate guests
arm/xen,arm64/xen: introduce p2m
arm64: define DMA_ERROR_CODE
arm: make SWIOTLB available
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
arch/arm/include/asm/dma-mapping.h
drivers/xen/swiotlb-xen.c
[Conflicts arose b/c "arm: make SWIOTLB available" v8 was in Stefano's
branch, while I had v9 + Ack from Russel. I also fixed up white-space
issues]
|
|
Use xen_alloc_coherent_pages and xen_free_coherent_pages to allocate or
free coherent pages.
We need to be careful handling the pointer returned by
xen_alloc_coherent_pages, because on ARM the pointer is not equal to
phys_to_virt(*dma_handle). In fact virt_to_phys only works for kernel
direct mapped RAM memory.
In ARM case the pointer could be an ioremap address, therefore passing
it to virt_to_phys would give you another physical address that doesn't
correspond to it.
Make xen_create_contiguous_region take a phys_addr_t as start parameter to
avoid the virt_to_phys calls which would be incorrect.
Changes in v6:
- remove extra spaces.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Implement xen_swiotlb_set_dma_mask, use it for set_dma_mask on arm.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Xen on arm and arm64 needs SWIOTLB_XEN: when running on Xen we need to
program the hardware with mfns rather than pfns for dma addresses.
Remove SWIOTLB_XEN dependency on X86 and PCI and make XEN select
SWIOTLB_XEN on arm and arm64.
At the moment always rely on swiotlb-xen, but when Xen starts supporting
hardware IOMMUs we'll be able to avoid it conditionally on the presence
of an IOMMU on the platform.
Implement xen_create_contiguous_region on arm and arm64: for the moment
we assume that dom0 has been mapped 1:1 (physical addresses == machine
addresses) therefore we don't need to call XENMEM_exchange. Simply
return the physical address as dma address.
Initialize the xen-swiotlb from xen_early_init (before the native
dma_ops are initialized), set xen_dma_ops to &xen_swiotlb_dma_ops.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changes in v8:
- assume dom0 is mapped 1:1, no need to call XENMEM_exchange.
Changes in v7:
- call __set_phys_to_machine_multi from xen_create_contiguous_region and
xen_destroy_contiguous_region to update the P2M;
- don't call XENMEM_unpin, it has been removed;
- call XENMEM_exchange instead of XENMEM_exchange_and_pin;
- set nr_exchanged to 0 before calling the hypercall.
Changes in v6:
- introduce and export xen_dma_ops;
- call xen_mm_init from as arch_initcall.
Changes in v4:
- remove redefinition of DMA_ERROR_CODE;
- update the code to use XENMEM_exchange_and_pin and XENMEM_unpin;
- add a note about hardware IOMMU in the commit message.
Changes in v3:
- code style changes;
- warn on XENMEM_put_dma_buf failures.
|
|
Introduce physical to machine and machine to physical tracking
mechanisms based on rbtrees for arm/xen and arm64/xen.
We need it because any guests on ARM are an autotranslate guests,
therefore a physical address is potentially different from a machine
address. When programming a device to do DMA, we need to be
extra-careful to use machine addresses rather than physical addresses to
program the device. Therefore we need to know the physical to machine
mappings.
For the moment we assume that dom0 starts with a 1:1 physical to machine
mapping, in other words physical addresses correspond to machine
addresses. However when mapping a foreign grant reference, obviously the
1:1 model doesn't work anymore. So at the very least we need to be able
to track grant mappings.
We need locking to protect accesses to the two trees.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changes in v8:
- move pfn_to_mfn and mfn_to_pfn to page.h as static inline functions;
- no need to walk the tree if phys_to_mach.rb_node is NULL;
- correctly handle multipage p2m entries;
- substitute the spin_lock with a rwlock.
|
|
Linux 3.11-rc7
As we need the git commit 28817e9de4f039a1a8c1fe1df2fa2df524626b9e
Author: Chuck Anderson <chuck.anderson@oracle.com>
Date: Tue Aug 6 15:12:19 2013 -0700
xen/smp: initialize IPI vectors before marking CPU online
* tag 'v3.11-rc7': (443 commits)
Linux 3.11-rc7
ARC: [lib] strchr breakage in Big-endian configuration
VFS: collect_mounts() should return an ERR_PTR
bfs: iget_locked() doesn't return an ERR_PTR
efs: iget_locked() doesn't return an ERR_PTR()
proc: kill the extra proc_readfd_common()->dir_emit_dots()
cope with potentially long ->d_dname() output for shmem/hugetlb
usb: phy: fix build breakage
USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
staging: comedi: bug-fix NULL pointer dereference on failed attach
lib/lz4: correct the LZ4 license
memcg: get rid of swapaccount leftovers
nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
drivers/platform/olpc/olpc-ec.c: initialise earlier
ipv4: expose IPV4_DEVCONF
ipv6: handle Redirect ICMP Message with no Redirected Header option
be2net: fix disabling TX in be_close()
Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
Revert "genetlink: fix family dump race"
...
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
When linux is running as dom0, Xen doesn't show the physical cpu but a
virtual CPU.
On some ARM SOC (for instance the exynos 5250), linux registers callbacks
for cpuidle and cpufreq. When these callbacks are called, they will modify
directly the physical cpu not the virtual one. It can impact the whole board
instead of only dom0.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
xen_pm_init was unconditionally setting pm_power_off and arm_pm_restart
function pointers. This breaks multi-platform kernels. Make this
conditional on running as a Xen guest and make it a late_initcall to
ensure it is setup after platform code for Dom0.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
- On ARM did not have balanced calls to get/put_cpu.
- Fix to make tboot + Xen + Linux correctly.
- Fix events VCPU binding issues.
- Fix a vCPU online race where IPIs are sent to not-yet-online vCPU.
* tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/smp: initialize IPI vectors before marking CPU online
xen/events: mask events when changing their VCPU binding
xen/events: initialize local per-cpu mask for all possible events
x86/xen: do not identity map UNUSABLE regions in the machine E820
xen/arm: missing put_cpu in xen_percpu_init
|
|
When CONFIG_PREEMPT is enabled, Linux will not be able to boot and warn:
[ 4.127825] ------------[ cut here ]------------
[ 4.133376] WARNING: at init/main.c:699 do_one_initcall+0x150/0x158()
[ 4.140738] initcall xen_init_events+0x0/0x10c returned with preemption imbalance
This is because xen_percpu_init uses get_cpu but doesn't have the corresponding
put_cpu.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Commit 7b6d864b48d9 (reboot: arm: change reboot_mode to use enum
reboot_mode) and ff701306cd49 (arm64: use common reboot infrastructure)
change the prototype of arm_pm_restart on arm and arm64.
Update xen_restart accordingly.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Rename xen_secondary_init to xen_percpu_init.
Run xen_percpu_init on the each online cpu, reuse the current on_each_cpu call.
Merge xen_percpu_enable_events into xen_percpu_init.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
We expect VCPUOP_register_vcpu_info to succeed, do not try to handle
failures.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
|
|
If we are running in dom0, we have to wait for the arch specific code to
complete the initialization in order for us to successfully reset the
power_off and pm_restart functions.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
|
|
Changes in v5:
- set pm_power_off and arm_pm_restart from the Xen specific
intialization code.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Map vcpu_info using VCPUOP_register_vcpu_info on all the online vcpus,
make sure the allocated struct doesn't cross a page boundary.
Call enable_percpu_irq on every cpu.
Changes in v5:
- allocate xen_vcpu_info dynamically, aligning it to the size of the
struct;
- use VCPUOP_register_vcpu_info on cpu0 too.
Changed in v2:
- move the percpu variable argument fix to a separate patch;
- remove unused variable.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
|
|
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Ian Campbell <ian.camjpbell@citrix.com>
CC: stable@vger.kernel.org
|
|
Allows for more fine grained error reporting. Only used by PVH and
ARM both of which are marked EXPERIMENTAL precisely because the ABI
is not yet stable
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[v1: Rebased without PVH patches]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen updates from Konrad Rzeszutek Wilk:
- Add necessary infrastructure to make balloon driver work under ARM.
- Add /dev/xen/privcmd interfaces to work with ARM and PVH.
- Improve Xen PCIBack wild-card parsing.
- Add Xen ACPI PAD (Processor Aggregator) support - so can offline/
online sockets depending on the power consumption.
- PVHVM + kexec = use an E820_RESV region for the shared region so we
don't overwrite said region during kexec reboot.
- Cleanups, compile fixes.
Fix up some trivial conflicts due to the balloon driver now working on
ARM, and there were changes next to the previous work-arounds that are
now gone.
* tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/PVonHVM: fix compile warning in init_hvm_pv_info
xen: arm: implement remap interfaces needed for privcmd mappings.
xen: correctly use xen_pfn_t in remap_domain_mfn_range.
xen: arm: enable balloon driver
xen: balloon: allow PVMMU interfaces to be compiled out
xen: privcmd: support autotranslated physmap guests.
xen: add pages parameter to xen_remap_domain_mfn_range
xen/acpi: Move the xen_running_on_version_or_later function.
xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h
xen/acpi: Fix compile error by missing decleration for xen_domain.
xen/acpi: revert pad config check in xen_check_mwait
xen/acpi: ACPI PAD driver
xen-pciback: reject out of range inputs
xen-pciback: simplify and tighten parsing of device IDs
xen PVonHVM: use E820_Reserved area for shared_info
|
|
We use XENMEM_add_to_physmap_range which is the preferred interface
for foreign mappings.
Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The code is now in a state where can just enable it.
Drop the *_xenballloned_pages duplicates since these are now supplied
by the balloon code.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The commit 911dec0db4de6ccc544178a8ddaf9cec0a11d533
"xen/arm: Fix compile errors when drivers are compiled as modules." exports
the neccessary functions. But to guard ourselves against out-of-tree modules
and future drivers hitting this, lets export all of the relevant
hypercalls.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
We end up with:
ERROR: "HYPERVISOR_event_channel_op" [drivers/xen/xen-gntdev.ko] undefined!
ERROR: "privcmd_call" [drivers/xen/xen-privcmd.ko] undefined!
ERROR: "HYPERVISOR_grant_table_op" [drivers/net/xen-netback/xen-netback.ko] undefined!
and this patch exports said function (which is implemented in hypercall.S).
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Use the new __HVC macro in hypercall.S.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
This correctly sizes it as 64 bit on ARM but leaves it as unsigned
long on x86 (therefore no intended change on x86).
The long and ulong guest handles are now unused (and a bit dangerous)
so remove them.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Only until we get the balloon driver to work.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Compile events.c on ARM.
Parse, map and enable the IRQ to get event notifications from the device
tree (node "/xen").
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Initialize the grant table mapping at the address specified at index 0
in the DT under the /xen node.
After the grant table is initialized, call xenbus_probe (if not dom0).
Changes in v2:
- introduce GRANT_TABLE_PHYSADDR;
- remove unneeded initialization of boot_max_nr_grant_frames.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Use Xen features to figure out if we are privileged.
XENFEAT_dom0 was introduced by 23735 in xen-unstable.hg.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Check for a node in the device tree compatible with "xen,xen", if it is
present set xen_domain_type to XEN_HVM_DOMAIN and continue
initialization.
Map the real shared info page using XENMEM_add_to_physmap with
XENMAPSPACE_shared_info.
Changes in v4:
- simpler parsing of Xen version in the compatible DT node.
Changes in v3:
- use the "xen,xen" notation rather than "arm,xen";
- add an additional check on the presence of the Xen version.
Changes in v2:
- replace pr_info with pr_debug.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Changes in v2:
- return -ENOSYS rather than -1.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Use r12 to pass the hypercall number to the hypervisor.
We need a register to pass the hypercall number because we might not
know it at compile time and HVC only takes an immediate argument.
Among the available registers r12 seems to be the best choice because it
is defined as "intra-procedure call scratch register".
Use the ISS to pass an hypervisor specific tag.
Changes in v2:
- define an HYPERCALL macro for 5 arguments hypercall wrappers, even if
at the moment is unused;
- use ldm instead of pop;
- fix up comments.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
- Basic hypervisor.h and interface.h definitions.
- Skeleton enlighten.c, set xen_start_info to an empty struct.
- Make xen_initial_domain dependent on the SIF_PRIVILIGED_BIT.
The new code only compiles when CONFIG_XEN is set, that is going to be
added to arch/arm/Kconfig in patch #11 "xen/arm: introduce CONFIG_XEN on
ARM".
Changes in v3:
- improve comments.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
