summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/Makefile
AgeCommit message (Collapse)Author
2022-05-06arm64: dts: renesas: Add Renesas White Hawk boards supportYoshihiro Shimoda
Initial support for the Renesas White Hawk CPU and BreakOut boards. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220428135058.597586-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13arm64: dts: renesas: Add initial device tree for RZ/G2UL Type-1 SMARC EVKBiju Das
Add basic support for RZ/G2UL SMARC EVK (based on R9A07G043U11): - memory - External input clock - CPG - DMA - SCIF It shares the same carrier board with RZ/G2L, but the pin mapping is different. Disable the device nodes which are not tested and delete the corresponding pinctrl definitions. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220412161314.13800-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-02-02arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVKBiju Das
Add basic support for the RZ/V2L SMARC EVK (based on R9A07G054L2): - memory - External input clock - CPG - Pin controller - SCIF - GbEthernet - Audio Clock It shares the same carrier board with RZ/G2L with the same pin mapping. Delete the gpio-hog nodes from pinctrl as they will be added later when the functionality has been tested. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220110134659.30424-12-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-01-24arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVKBiju Das
Add basic support for the RZ/G2LC SMARC EVK (based on R9A07G044C2): - memory - External input clock - SCIF - GbEthernet - Audio Clock It shares the same carrier board with RZ/G2L, but the pin mapping is different. Disable the device nodes which are not tested and delete the corresponding pinctrl definitions. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211216114305.5842-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-07arm64: dts: renesas: Add Renesas Spider boards supportYoshihiro Shimoda
Initial support for the Renesas Spider CPU and BreakOut boards. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Takehito Nakamura <takehito.nakamura.nx@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-14-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-20arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne-2GGeert Uytterhoeven
Add support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3Ne-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/efced5c7ff71b0a0ae359be12112e0d4dfb21a72.1628766192.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e-2GGeert Uytterhoeven
Add support for the Renesas R-Car Starter Kit Pro and Kingfisher combo equipped with an R-Car M3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/54262b64be6d5c7a7ede3302259e9d15218d48a0.1626708063.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: Add support for M3ULCB with R-Car M3e-2GGeert Uytterhoeven
Add support for the Renesas R-Car Starter Kit Pro equipped with an R-Car M3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/c566dfa5f07605a467f8705c3a2f637ea445b1ff.1626708063.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2GGeert Uytterhoeven
Add support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/177666b6ffa0b404e1e45504763dd381107a02f3.1626708063.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e-2GGeert Uytterhoeven
Add support for the Renesas R-Car Starter Kit Premier and Kingfisher combo equipped with an R-Car H3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/985ad56e9f93d08cf3d1014fbba86ea54beb01e1.1626708063.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2GGeert Uytterhoeven
Add support for the Renesas R-Car Starter Kit Premier equipped with an R-Car H3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/561a01ebeeef3f39f56cdc6ba8533bef222a72f2.1626708063.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2GGeert Uytterhoeven
Add support for the Renesas Salvator-X 2nd version development board equipped with an R-Car H3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/2a6cc94d27cd87e0231d15c39c5f7cff1e751834.1626708063.git.geert+renesas@glider.be
2021-06-10arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVKLad Prabhakar
Add basic support for RZ/G2L SMARC EVK (based on R9A07G044L2): - memory - External input clock - SCIF Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210609153230.6967-12-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-11arm64: dts: renesas: r8a774e1: Introduce beacon-rzg2h-kitAdam Ford
Beacon EmbeddedWorks is introducing a new kit based on the RZ/G2H SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. It uses the same baseboard and SOM files as the RZ/G2M and RZ/G2N kits. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20201224170502.2254683-8-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-11arm64: dts: renesas: r8a774b1: Introduce beacon-rzg2n-kitAdam Ford
Beacon EmbeddedWorks is introducing a new kit based on the RZ/G2N SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. It uses the same baseboard and SOM as the RZ/G2M. This SOM has only 2GB of DDR, and beacon-renesom-som.dtsi contains the base memory node, so an additional memory node isn't necessary. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20201224170502.2254683-7-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-11-10arm64: dts: renesas: r8a77961: ulcb-kf: Initial device treeEugeniu Rosca
Create a dedicated DTB for M3-ES3.0 + ULCB + Kingfisher combo. Inspire from the pre-existing ULCB-KF device trees: $ ls -1 arch/arm64/boot/dts/renesas/*ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20201029133741.25721-2-erosca@de.adit-jv.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-26arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope ↵Lad Prabhakar
RZ/G2N Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2N board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201020125134.22625-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-26arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope ↵Lad Prabhakar
RZ/G2M Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2M board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201020125134.22625-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-26arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope ↵Lad Prabhakar
RZ/G2H Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2H board. Common file hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi is created which will be used by RZ/G2{HMN}, by default the CSI20 node is tied to ov5645 camera endpoint and the imx219 camera endpoint is tied to CSI40. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20201020125134.22625-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10arm64: dts: renesas: Add Renesas Falcon boards supportYoshihiro Shimoda
Initial support for the Renesas Falcon CPU and BreakOut boards support. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1599739372-30669-5-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-04arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr displayLad Prabhakar
The HiHope RZ/G2H is advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts, enabling the lvds node to get the panel to work with HiHope RZ/G2H. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20200827181918.30130-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kitAdam Ford
Beacon EmebeddedWorks, formerly Logic PD is introducing a new SOM and development kit based on the RZ/G2M SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20200715140622.1295370-1-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17arm64: dts: renesas: Add HiHope RZ/G2H sub board supportMarian-Cristian Rotariu
The HiHope RZ/G2H sub board sits below the HiHope RZ/G2H main board. These boards are identical with the ones for RZ/G2M[N]. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594230511-24790-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17arm64: dts: renesas: Add HiHope RZ/G2H main board supportMarian-Cristian Rotariu
Basic support for the HiHope RZ/G2H main board: - Memory, - Main crystal, - Serial console - eMMC Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594230511-24790-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-16arm64: dts: renesas: Restructure MakefileGeert Uytterhoeven
Make the Makefile for building Renesas DTB files easier to read and maintain: - Get rid of line continuations, - Use a single entry per line, - Sort SoCs and boards alphabetically, - Separate SoCs by blank lines. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200706154015.29257-1-geert+renesas@glider.be
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2N Rev2.0/3.0/4.0 board with idk-1110wr ↵Lad Prabhakar
display The HiHope RZ/G2N variants are advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts's, enabling the lvds node to get the panel to work with all the HiHope RZ/G2N variants. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-12-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 sub board supportLad Prabhakar
The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N Rev.3.0/4.0 main board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 main board supportLad Prabhakar
Add support for HiHope RZ/G2N Rev.3.0/4.0 main board support based on r8a774b1 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 board with idk-1110wr displayLad Prabhakar
Add support for idk-1110wr display as similarly done for Rev.2.0 Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 sub board supportLad Prabhakar
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M Rev.3.0/4.0 main board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 main board supportLad Prabhakar
Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on r8a774a1 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: r8a774b1-hihope-rzg2n[-ex]: Rename HiHope RZ/G2N boardsLad Prabhakar
The existing DTS files for HiHope RZ/G2N boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: r8a774a1-hihope-rzg2m[-ex/-ex-idk-1110wr]: Rename ↵Lad Prabhakar
HiHope RZ/G2M boards The existing DTS files for HiHope RZ/G2M boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. While at it also added a comment about switch SW43 to be OFF for pciec1 to be activated. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-12arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI ↵Lad Prabhakar
Adapter V2.1 This patch adds support for AISTARVISION MIPI Adapter V2.1 board connected to G2E board. Common file aistarvision-mipi-adapter-2.1.dtsi is created which have the camera endpoint nodes for imx219 and ov5645 so that this can be re-used with other G2x platforms. r8a774c0-ek874-mipi-2.1.dts file enables the required VIN/CSI nodes and by default ties ov5645 camera endpoint to CSI2. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1587397794-11237-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-03-12arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr displayFabrizio Castro
The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. A new dts, adding everything that's required to get the panel to work with HiHope RZ/G2M, is the most convenient way to support the HiHope RZ/G2M when it's connected to the idk-1110wr. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1583957020-16359-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-03-12arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+Yuya Hamamachi
Add initial support for the Renesas M3ULCB board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. To avoid build error on 'ulcb.dtsi', ssi2 is added into 'r8a77961.dtsi'. Based on commit 92980759c1699a3c ("arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+"). Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com> Link: https://lore.kernel.org/r/20200309064425.25437-3-yuya.hamamachi.sx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-02-21arm64: dts: renesas: Remove use of ARCH_R8A7795Geert Uytterhoeven
CONFIG_ARCH_R8A7795 was split in CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951 in commit b925adfceb529389 ("soc: renesas: Add ARCH_R8A7795[01] for existing R-Car H3"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200218112414.5591-1-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Prepare for split of ARCH_R8A7795 into ARCH_R8A7795[01]Geert Uytterhoeven
As R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, CONFIG_ARCH_R8A7795 will be split in CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951. Relax dependencies by handling both the old and the new symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-5-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Sort DTBs in MakefileGeert Uytterhoeven
Sort the entries for the various DTBs in the Makefile by SoC and board type. Keep Salvator-X(S) together, and do the same for ULCB with and without Kingfisher extension. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-4-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Drop redundant SoC prefixes from ULCB DTS file namesGeert Uytterhoeven
Unlike the V3MSK and V3HSK boards, the various "ULCB" boards are really the same boards, with different SiPs fitted, just like the Salvator-X(S) boards. Furthermore, the "H3", "M3", and "M3N" prefixes of the "ULCB" parts in the DTS file names are redundant, as they are implied by the SoC part numbers, which are also part of the file names. Hence drop the redundant prefixes, to make the DTS file names consistent with the file names for the various "Salvator-X(S)" boards. Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-3-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Rename r8a7795{-es1,}* to r8a7795[01]*Geert Uytterhoeven
Despite using the same compatible values ("r8a7795"-based) because of historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, with different part numbers. Reflect this in the DTS files by changing their base names from "r8a7795-es1" and "r8a7795" to "r8a77950" resp. "r8a77951". Drop all "ES" references next to part numbers, as they are implied by the part numbers, and thus redundant. Note that DT binding headers, definitions, and compatible values are not renamed, to preserve backward compatibility. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-2-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: Add EK874 board with idk-2121wr display supportFabrizio Castro
The EK874 is advertised as compatible with panel IDK-2121WR from Advantech, however the panel isn't sold alongside the board. A new dts, adding everything that's required to get the panel to to work with the EK874, is the most convenient way to support the EK874 when it's connected to the IDK-2121WR. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/1576590361-28244-7-git-send-email-fabrizio.castro@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-13arm64: dts: renesas: Rename r8a7796* to r8a77960*Geert Uytterhoeven
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), to avoid confusion between R-Car M3-W (R8A77960) and R-Car M3-W+ (R8A77961). Rename the DTS files as well, for consistency. Note that DT binding headers, definitions, and compatible values were not renamed, to preserve backward compatibility. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211131311.23661-1-geert+renesas@glider.be Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-12-13arm64: dts: renesas: Remove use of ARCH_R8A7796Geert Uytterhoeven
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211100438.7094-1-geert+renesas@glider.be
2019-11-01arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+Geert Uytterhoeven
Add initial support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. The memory map is as follows: - Bank0: 4GiB RAM : 0x000048000000 -> 0x000bfffffff 0x000480000000 -> 0x004ffffffff - Bank1: 4GiB RAM : 0x000600000000 -> 0x006ffffffff Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023123342.13100-10-geert+renesas@glider.be
2019-11-01arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960Geert Uytterhoeven
CONFIG_ARCH_R8A7796 for R-Car M3-W (R8A77960) will be renamed to CONFIG_ARCH_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961), which will use CONFIG_ARCH_R8A77961. Relax dependencies by handling both symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023123342.13100-8-geert+renesas@glider.be
2019-10-10arm64: dts: renesas: Add HiHope RZ/G2N sub board supportBiju Das
The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N main board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1569831527-1250-6-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-01arm64: dts: renesas: Add HiHope RZ/G2N main board supportBiju Das
Basic support for the HiHope RZ/G2N main board: - Memory, - Main crystal, - Serial console Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1568725530-55241-5-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-06arm64: dts: renesas: Add HiHope RZ/G2M sub board supportBiju Das
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M main board. This patch also adds ethernet support along with a dtsi common to both HiHope RZ/G2M and RZ/G2N sub boards. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-06arm64: dts: renesas: Add HiHope RZ/G2M main board supportBiju Das
Basic support for the HiHope RZ/G2M main board: - Memory, - Main crystal, - Serial console This patch also includes a dtsi common to both HiHope RZ/G2M and RZ/G2N main boards. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-13 03:13:03 +0000