| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 5.17 (part 2)
Allow using old PCIe card on Armada 37xx
* tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
Link: https://lore.kernel.org/r/87bkydj4fn.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.
Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.
So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.
Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.
Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This reverts commit 32568ae37596b529628ac09b875f4874e614f63f.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree fixes for v5.17
This contains a single, last-minute fix to disable the display SMMU by
default because under some circumstances leaving it enabled by default
can cause SMMU faults on boot.
* tag 'tegra-for-5.17-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Disable ISO SMMU for Tegra194
Link: https://lore.kernel.org/r/20220307182120.2169598-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define
also alias for ethernet0.
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes
- Set display pipeline to DSI on mt8183 kukui jacuzzi
- Fix display for mt8192 based boards by fixing the routing table
* tag 'v5.17-fixes-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
Link: https://lore.kernel.org/r/8eb8510d-c597-4fee-e4b3-924b6d4bb3be@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DeviceTree fixes for 5.17
This starts off by fixing an issue introduced in a bug fix in the
global clock controller, where the symbol clocks for UFS would
end up picking the wrong parent clock which breaks UFS.
It then makes sure that the reference clock for the USB blocks are
enabled, even with booting without clk_ignore_unused.
It corrects the apps SMMU interrupts defintion by adding a missing
interrupt in the list.
Lastly it disables the Qualcomm crypto hardware (for now) on the Lenovo
Yoga C630, to prevent the cryptomanager tests during boot from crashing
the device.
* tag 'qcom-arm64-fixes-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
Link: https://lore.kernel.org/r/20220301033526.1801295-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mt8183-kukui-jacuzzi has an anx7625 bridge connected to the output of
its DSI host. However, after commit fd0310b6fe7d ("drm/bridge: anx7625:
add MIPI DPI input feature"), a bus-type property started being required
in the endpoint node by the driver to indicate whether it is DSI or DPI.
Add the missing bus-type property and set it to 5
(V4L2_FWNODE_BUS_TYPE_PARALLEL) so that the driver has its input
configured to DSI and the display pipeline can probe correctly.
While at it, also set the data-lanes property that was also introduced
in that same commit, so that we don't rely on the default value.
Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220214200507.2500693-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.17, round 2:
- Drop reset signal from i.MX8MM vpumix power domain to fix a system
hang.
- Fix a dtbs_check warning caused by #thermal-sensor-cells in i.MX8ULP
device tree.
- Fix a clock disabling imbalance in gpcv2 driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fix the display-port-sound on Gru devices, DDR voltage on the Quartz-A
board, fix emmc signal-integrity and usb OTG mode on rk3399-puma as well
as a number of dtschema fixes to make the reduce the number of errors.
* tag 'v5.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
ARM: dts: rockchip: reorder rk322x hmdi clocks
arm64: dts: rockchip: reorder rk3399 hdmi clocks
arm64: dts: rockchip: align pl330 node name with dtschema
arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity
arm64: dts: rockchip: fix Quartz64-A ddr regulator voltage
arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output
arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode
arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568
arm64: dts: rockchip: fix dma-controller node names on rk356x
Link: https://lore.kernel.org/r/1973741.CViHJPHrxy@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm Juno fix for v5.17
Just a single fix to address coherency issue reported[1] by removing the
GICv2m address from the DMA ranges as it loose coherency if mapped as
cacheable at the SMMU due to the attribute combining rules. The GICv2m
range is normally programmed for Device memory attributes.
[1] https://lore.kernel.org/stable/0a1d437d-9ea0-de83-3c19-e07f560ad37c@arm.com/
* tag 'juno-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Remove GICv2m dma-range
Link: https://lore.kernel.org/r/20220214142615.2375269-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA dts updates for v5.18, part 2
- Add the "intel,socfpga-agilex-hsotg" compatible for Agilex platform
* tag 'socfpga_dts_update_for_v5.18_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"
dt-bindings: usb: dwc2: add compatible "intel,socfpga-agilex-hsotg"
Link: https://lore.kernel.org/r/20220211112556.98940-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Disable the crypto block due to it causing an SError in qce_start() on
the C630, which happens upon every boot when cryptomanager tests are
enabled.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
[bjorn: Reworked commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211105035235.2392-1-steev@kali.org
|
|
The SCMI binding clearly states the value of #thermal-sensor-cells must
be 1. However arch/arm64/boot/dts/freescale/imx8ulp.dtsi sets it 0 which
results in the following warning with dtbs_check:
| arch/arm64/boot/dts/freescale/imx8ulp-evk.dt.yaml: scmi:
| protocol@15:#thermal-sensor-cells:0:0: 1 was expected
| From schema: Documentation/devicetree/bindings/firmware/arm,scmi.yaml
Fix it by setting it to 1 as required.
Cc:Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Fixes: a38771d7a49b ("arm64: dts: imx8ulp: add scmi firmware node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The vpumix power domain has a reset assigned to it, however
when used, it causes a system hang. Testing has shown that
it does not appear to be needed anywhere.
Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This reverts commit 0c566618e27f17b5807086dba8c222ca8ca3dc1e,
this one was meant for v5.18, not as a bugfix, though the
patch itself was correct.
Reported-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DWC2 USB controller on the Agilex platform does not support clock
gating, so use the chip specific "intel,socfpga-agilex-hsotg"
compatible.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The binding specifies the clock order to "cec", "grf", "vpll". Reorder
the clocks accordingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220126145549.617165-19-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes
Device Tree fixes for TI K3 platform for v5.17 merge window
* Update J721S2 platform to switch serial aliases to ttyS2.
* tag 'ti-k3-dt-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2
arm64: dts: ti: k3-j721s2: Move aliases to board dts
Link: https://lore.kernel.org/r/20220204130716.fjlm4vvcbtzcwlwx@chalice
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.17:
- Fix sound card model for MBa8Mx board.
- Drop i.MX8MQ LCDIF port node unit-address to fix DTC warning.
- Add missing SD card detect line for imx6qdl-udoo board.
- Remove MX23_PAD_SSP1_DETECT from imx23-evk hog group. It fixes the
broken SD ard support on the board.
- A couple of fixes from Martin Kepplinger to fix the MIPI_CSI port
number on i.MX8MQ.
- Re-enable ftm_alarm0 device on ls1028a-kontron-sl28 board which was
disabled accidentally.
- Fix 'assigned-clocks-parents' typo in i.MX7ULP watchdog device node.
- Disable GPU device on imx8mn-venice-gw7902 board, as it uses
MIMX8MN5CVTI SoC which does not integrate a GPU.
* tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix lcdif port node
arm64: dts: imx8mq-librem5: fix mipi_csi1 port number to sensor
arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers
ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo
arm64: dts: ls1028a: sl28: re-enable ftm_alarm0
arm64: dts: freescale: Fix sound card model for MBa8Mx
ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group
ARM: dts: imx6qdl-udoo: Properly describe the SD card detect
arm64: dts: imx8mn-venice-gw7902: disable gpu
Link: https://lore.kernel.org/r/20220129073150.GZ4686@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since the correct gpio pin is used for enabling tf-io regulator the
system did not boot correctly after calling reboot.
[ 36.862443] reboot: Restarting system
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd 1.
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id:
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;...
Setting the gpio to open drain solves the issue.
Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: reduced serial log & removed invalid character in commit message]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220128193150.GA1304381@odroid-VirtualBox
|
|
The BL32/TEE reserved-memory region is now inherited from the common
family dtsi (meson-g12-common) so we can drop it from board files.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com
|
|
Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com
|
|
Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.
Suggested-by: Mateusz Krzak <kszaquitto@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com
|
|
GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of
TF_PWR_EN of 'FC8731' on BPI-M5
Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220127151656.GA2419733@paju
|
|
The interrupt pin of the external ethernet phy is used, instead of the
enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in
the gpio_ao bank.
This causes phy interrupt problems at system startup.
[ 76.645190] irq 36: nobody cared (try booting with the "irqpoll" option)
[ 76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2
[ 76.649629] Hardware name: Hardkernel ODROID-HC4 (DT)
[ 76.649635] Call trace:
[ 76.649638] dump_backtrace+0x0/0x1c8
[ 76.649658] show_stack+0x14/0x60
[ 76.649667] dump_stack_lvl+0x64/0x7c
[ 76.649676] dump_stack+0x14/0x2c
[ 76.649683] __report_bad_irq+0x38/0xe8
[ 76.649695] note_interrupt+0x220/0x3a0
[ 76.649704] handle_irq_event_percpu+0x58/0x88
[ 76.649713] handle_irq_event+0x44/0xd8
[ 76.649721] handle_fasteoi_irq+0xa8/0x130
[ 76.649730] generic_handle_domain_irq+0x38/0x58
[ 76.649738] gic_handle_irq+0x9c/0xb8
[ 76.649747] call_on_irq_stack+0x28/0x38
[ 76.649755] do_interrupt_handler+0x7c/0x80
[ 76.649763] el1_interrupt+0x34/0x80
[ 76.649772] el1h_64_irq_handler+0x14/0x20
[ 76.649781] el1h_64_irq+0x74/0x78
[ 76.649788] irq_finalize_oneshot.part.56+0x68/0xf8
[ 76.649796] irq_thread_fn+0x5c/0x98
[ 76.649804] irq_thread+0x13c/0x260
[ 76.649812] kthread+0x144/0x178
[ 76.649822] ret_from_fork+0x10/0x20
[ 76.649830] handlers:
[ 76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt
[ 76.661256] Disabling IRQ #36
Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed spurious invalid & blank lines from commit message]
Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox
|
|
Typo in audio amplifier node, dioo2133 -> dio2133
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang
|
|
Update interrupts in apps_smmu to match downstream. This is fixes apps_smmu
failing to probe when running at EL2 (expects 96 context interrupts)
Fixes: 892d5395396d ("arm64: dts: qcom: sm8450: add smmu nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220122162932.7686-2-jonathan@marek.ca
|
|
USB doesn't work at all without this clock enabled. This fixes USB when not
using clk_ignore_unused.
Fixes: 19fd04fb9247 ("arm64: dts: qcom: sm8450: Add usb nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220122162932.7686-1-jonathan@marek.ca
|
|
The introduction of '9a61f813fcc8 ("clk: qcom: regmap-mux: fix parent
clock lookup")' broke UFS support on SM8350.
The cause for this is that the symbol clocks have a specified rate in
the "freq-table-hz" table in the UFS node, which causes the UFS code to
request a rate change, for which the "bi_tcxo" happens to provide the
closest rate. Prior to the change in regmap-mux it was determined
(incorrectly) that no change was needed and everything worked.
The rates of 75 and 300MHz matches the documentation for the symbol
clocks, but we don't represent the parent clocks today. So let's mimic
the configuration found in other platforms, by omitting the rate for the
symbol clocks as well to avoid the rate change.
While at it also fill in the dummy symbol clocks that was dropped from
the GCC driver as it was upstreamed.
Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211222162058.3418902-1-bjorn.andersson@linaro.org
|
|
Fixes dtbs_check warnings like:
dmac@ff240000: $nodename:0: 'dmac@ff240000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220129175429.298836-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There are signal integrity issues running the eMMC at 200MHz on Puma
RK3399-Q7.
Similar to the work-around found for RK3399 Gru boards, lowering the
frequency to 100MHz made the eMMC much more stable, so let's lower the
frequency to 100MHz.
It might be possible to run at 150MHz as on RK3399 Gru boards but only
100MHz was extensively tested.
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Quartz64 Model A uses a voltage divider to ensure ddr voltage is
within specification from the default regulator configuration.
Adjusting this voltage is detrimental, and currently causes the ddr
voltage to be about 0.8v.
Remove the min and max voltage setpoints for the ddr regulator.
Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220128003809.3291407-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The port node does not have a unit-address, remove it.
This fixes the warnings:
lcd-controller@30320000: 'port' is a required property
lcd-controller@30320000: 'port@0' does not match any of the regexes:
'pinctrl-[0-9]+'
Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since the previous commit fixed a hardware description bug for imx8mq,
we need to fix up all DT users like this. The mipi_csi port@0
is connected to the sensor, not port@1.
Fixes: fed7603597fa ("arm64: dts: imx8mq-librem5: describe the selfie cam")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The port numbers for the imx8mq mipi csi controller are wrong and
the mipi driver can't find any media devices as port@1 is connected
to the CSI bridge, not port@0. And port@0 is connected to the
source - the sensor. Fix this.
Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit dd3d936a1b17 ("arm64: dts: ls1028a: add ftm_alarm1 node to be
used as wakeup source") disables ftm_alarm0 in the SoC dtsi but doesn't
enable it on the board which is still using it. Re-enable it on the sl28
board.
Fixes: dd3d936a1b17 ("arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The audio codec connection on MBa8Mx is identical to MBa7 (imx7) and MBa6
(imx6). Use the same sound card model as well.
Fixes commit dfcd1b6f7620 ("arm64: dts: freescale: add initial device tree
for TQMa8MQML with i.MX8MM")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit e762232f9466 ("arm64: tegra: Add ISO SMMU controller for Tegra194")
added the ISO SMMU for display devices on Tegra194. The SMMU is enabled by
default but not hooked up to the display controllers yet because we do not
have a way to pass frame-buffer memory from the bootloader to the kernel.
However, even though the SMMU is not hooked up to the display controllers'
SMMU faults are being seen if a display is connected. Therefore, keep the
ISO SMMU disabled by default for now.
Fixes: e762232f9466 ("arm64: tegra: Add ISO SMMU controller for Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Since commit 99aa29932271 ("arm64: dts: imx8mn: Enable GPU")
imx8mn-venice-gw7902 will hang during kernel init because it uses
a MIMX8MN5CVTI which does not have a GPU.
Disable pgc_gpumix to work around this. We also disable the GPU devices
that depend on the gpumix power domain and pgc_gpu to avoid them staying
in a probe deferred state forever.
Cc: Adam Ford <aford173@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Fixes: 99aa29932271 ("arm64: dts: imx8mn: Enable GPU")
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Although it is painstakingly honest to describe all 3 PCI windows in
"dma-ranges", it misses the the subtle distinction that the window for
the GICv2m range is normally programmed for Device memory attributes
rather than Normal Cacheable like the DRAM windows. Since MMU-401 only
offers stage 2 translation, this means that when the PCI SMMU is
enabled, accesses through that IPA range unexpectedly lose coherency if
mapped as cacheable at the SMMU, due to the attribute combining rules.
Since an extra 256KB is neither here nor there when we still have 10GB
worth of usable address space, rather than attempting to describe and
cope with this detail let's just remove the offending range. If the SMMU
is not used then it makes no difference anyway.
Link: https://lore.kernel.org/r/856c3f7192c6c3ce545ba67462f2ce9c86ed6b0c.1643046936.git.robin.murphy@arm.com
Fixes: 4ac4d146cb63 ("arm64: dts: juno: Describe PCI dma-ranges")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
On J721s2 Linux console is on main_uart8 but to be consistent with other
J7 family of devices, alias it to ttyS2 (serial2). This also eliminates
need to have higher number of 8250 runtime UARTs.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211223121650.26868-3-vigneshr@ti.com
|
|
Aliases are board specific and should be in board dts files.
So, move aliases to board dts and trim the list to interfaces that are
actually enabled.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211223121650.26868-2-vigneshr@ti.com
|
|
Commit b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif")
switched the platform to SPDIF, but we didn't fix up the device tree.
Drop the pinctrl settings, because the 'spdif_bus' pins are either:
* unused (on kevin, bob), so the settings is ~harmless
* used by a different function (on scarlet), which causes probe
failures (!!)
Fixes: b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220114150129.v2.1.I46f64b00508d9dff34abe1c3e8d2defdab4ea1e5@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The micro USB3.0 port available on the Haikou evaluation kit for Puma
RK3399-Q7 SoM supports dual-role model (aka drd or OTG) but its support
was broken until now because of missing logic around the ID pin.
This adds proper support for USB OTG on Puma Haikou by "connecting" the
GPIO used for USB ID to the USB3 controller device.
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220120125156.16217-1-quentin.schulz@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
pclk_xpcs is not supported by mainline driver and breaks dtbs_check
following warnings occour, and many more
rk3568-evb1-v10.dt.yaml: ethernet@fe2a0000: clocks:
[[15, 386], [15, 389], [15, 389], [15, 184], [15, 180], [15, 181],
[15, 389], [15, 185], [15, 172]] is too long
From schema: Documentation/devicetree/bindings/net/snps,dwmac.yaml
rk3568-evb1-v10.dt.yaml: ethernet@fe2a0000: clock-names:
['stmmaceth', 'mac_clk_rx', 'mac_clk_tx', 'clk_mac_refout', 'aclk_mac',
'pclk_mac', 'clk_mac_speed', 'ptp_ref', 'pclk_xpcs'] is too long
From schema: Documentation/devicetree/bindings/net/snps,dwmac.yaml
after removing it, the clock and other warnings are gone.
pclk_xpcs on gmac is used to support QSGMII, but this requires a driver
supporting it.
Once xpcs support is introduced, the clock can be added to the
documentation and both controllers.
Fixes: b8d41e5053cd ("arm64: dts: rockchip: add gmac0 node to rk3568")
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220123133510.135651-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
DMA-Cotrollers defined in rk356x.dtsi do not match the pattern in bindings.
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml:
dmac@fe530000: $nodename:0: 'dmac@fe530000' does not match '^dma-controller(@.*)?$'
From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml:
dmac@fe550000: $nodename:0: 'dmac@fe550000' does not match '^dma-controller(@.*)?$'
From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml
This Patch fixes it.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220123133615.135789-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
|
