| Age | Commit message (Collapse) | Author |
|---|
|
Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
The primary motivation for this series is to simplify dealing with enabling
virtualization for Intel's TDX, which needs to enable virtualization
when kvm-intel.ko is loaded, i.e. long before the first VM is created.
That said, this is a nice cleanup on its own. By registering the callbacks
on-demand, the callbacks themselves don't need to check kvm_usage_count,
because their very existence implies a non-zero count.
Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a
lock ordering issue between cpus_read_lock() and kvm_lock. The lock
ordering issue still exist in very rare cases, and will be fixed for
good by switching vm_list to an (S)RCU-protected list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is really time.
arm64 has all the required architecture related changes, that have been
identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on arm64.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20240906111841.562402-3-bigeasy@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"The updates to the defconfig files are fairly small, enabling drivers
for eight of the arm and riscv based platforms"
* tag 'soc-defconfig-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: enable mt8365 sound
riscv: defconfig: Enable pinctrl support for CV18XX Series SoC
arm64: defconfig: Enable ADP5585 GPIO and PWM drivers
arm64: defconfig: Enable Tegra194 PCIe Endpoint
arm64: defconfig: Enable E5010 JPEG Encoder
riscv: defconfig: sophgo: enable clks for sg2042
arm64: defconfig: build CONFIG_REGULATOR_QCOM_REFGEN as module
ARM: configs: at91: enable config flags for sam9x7 SoC family
arm64: defconfig: Enable R-Car Ethernet-TSN support
ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
arm64: defconfig: Enable AK4619 codec support
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
|
|
Support huge pfnmaps by using bit 56 (PTE_SPECIAL) for "special" on
pmds/puds. Provide the pmd/pud helpers to set/get special bit.
There's one more thing missing for arm64 which is the pxx_pgprot() for
pmd/pud. Add them too, which is mostly the same as the pte version by
dropping the pfn field. These helpers are essential to be used in the new
follow_pfnmap*() API to report valid pgprot_t results.
Note that arm64 doesn't yet support huge PUD yet, but it's still
straightforward to provide the pud helpers that we need altogether. Only
PMD helpers will make an immediate benefit until arm64 will support huge
PUDs first in general (e.g. in THPs).
Link: https://lkml.kernel.org/r/20240826204353.2228736-19-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There're:
- 8 archs (arc, arm64, include, mips, powerpc, s390, sh, x86) that
support pte_pgprot().
- 2 archs (x86, sparc) that support pmd_pgprot().
- 1 arch (x86) that support pud_pgprot().
Always define them to be used in generic code, and then we don't need to
fiddle with "#ifdef"s when doing so.
Link: https://lkml.kernel.org/r/20240826204353.2228736-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream version
20240827, add support for ACPI-based enumeration of interrupt
controllers on RISC-V along with some related irqchip updates, clean
up the ACPI device object sysfs interface, add some quirks for
backlight handling and IRQ overrides, fix assorted issues and clean up
code.
Specifics:
- Check return value in acpi_db_convert_to_package() (Pei Xiao)
- Detect FACS and allow setting the waking vector on reduced-hardware
ACPI platforms (Jiaqing Zhao)
- Allow ACPICA to represent semaphores as integers (Adrien Destugues)
- Complete CXL 3.0 CXIMS structures support in ACPICA (Zhang Rui)
- Make ACPICA support SPCR version 4 and add RISC-V SBI Subtype to
DBG2 (Sia Jee Heng)
- Implement the Dword_PCC Resource Descriptor Macro in ACPICA (Jose
Marinho)
- Correct the typo in struct acpi_mpam_msc_node member (Punit
Agrawal)
- Implement ACPI_WARNING_ONCE() and ACPI_ERROR_ONCE() and use them to
prevent a Stall() violation warning from being printed every time
this takes place (Vasily Khoruzhick)
- Allow PCC Data Type in MCTP resource (Adam Young)
- Fix memory leaks on acpi_ps_get_next_namepath() and
acpi_ps_get_next_field() failures (Armin Wolf)
- Add support for supressing leading zeros in hex strings when
converting them to integers and update integer-to-hex-string
conversions in ACPICA (Armin Wolf)
- Add support for Windows 11 22H2 _OSI string (Armin Wolf)
- Avoid warning for Dump Functions in ACPICA (Adam Lackorzynski)
- Add extended linear address mode to HMAT MSCIS in ACPICA (Dave
Jiang)
- Handle empty connection_node in iasl (Aleksandrs Vinarskis)
- Allow for more flexibility in _DSM args (Saket Dumbre)
- Setup for ACPICA release 20240827 (Saket Dumbre)
- Add ACPI device enumeration support for interrupt controller
probing including taking dependencies into account (Sunil V L)
- Implement ACPI-based interrupt controller probing on RISC-V
(Sunil V L)
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L)
- Do not release locks during operation region accesses in the ACPI
EC driver (Rafael Wysocki)
- Fix up the _STR handling in the ACPI device object sysfs interface,
make it represent the device object attributes as an attribute
group and make it rely on driver core functionality for sysfs
attrubute management (Thomas Weißschuh)
- Extend error messages printed to the kernel log when
acpi_evaluate_dsm() fails to include revision and function number
(David Wang)
- Add a new AMDI0015 platform device ID to the ACPi APD driver for
AMD SoCs (Shyam Sundar S K)
- Use the driver core for the async probing management in the ACPI
battery driver (Thomas Weißschuh)
- Remove redundant initalizations of a local variable to NULL from
the ACPI battery driver (Ilpo Järvinen)
- Remove unneeded check in tps68470_pmic_opregion_probe() (Aleksandr
Mishin)
- Add support for setting the EPP register through the ACPI CPPC
sysfs interface if it is in FFH (Mario Limonciello)
- Fix MASK_VAL() usage in the ACPI CPPC library (Clément Léger)
- Reduce the log level of a per-CPU message about idle states in the
ACPI processor driver (Li RongQing)
- Fix crash in exit_round_robin() in the ACPI processor aggregator
device (PAD) driver (Seiji Nishikawa)
- Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI
backlight driver (Hans de Goede)
- Make the DMI checks related to backlight handling on Lenovo Yoga
Tab 3 X90F less strict (Hans de Goede)
- Enforce native backlight handling on Apple MacbookPro9,2 (Esther
Shimanovich)
- Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV
GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim
Khan, Werner Sembach)
- Quirk ASUS ROG M16 to default to S3 sleep (Luke D. Jones)
- Define and use symbols for device and class name lengths in the
ACPI bus type code and make the code use strscpy() instead of
strcpy() in several places (Muhammad Qasim Abdul Majeed)"
* tag 'acpi-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: CPPC: Add support for setting EPP register in FFH
ACPI: PM: Quirk ASUS ROG M16 to default to S3 sleep
ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18
ACPI: battery: use driver core managed async probing
ACPI: button: Use strscpy() instead of strcpy()
ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB
ACPI: CPPC: Fix MASK_VAL() usage
irqchip/sifive-plic: Add ACPI support
ACPICA: Setup for ACPICA release 20240827
ACPICA: Allow for more flexibility in _DSM args
ACPICA: iasl: handle empty connection_node
ACPICA: HMAT: Add extended linear address mode to MSCIS
ACPICA: Avoid warning for Dump Functions
ACPICA: Add support for Windows 11 22H2 _OSI string
ACPICA: Update integer-to-hex-string conversions
ACPICA: Add support for supressing leading zeros in hex strings
ACPICA: Allow for supressing leading zeros when using acpi_ex_convert_to_ascii()
ACPICA: Fix memory leak if acpi_ps_get_next_field() fails
ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails
...
|
|
Pull kvm updates from Paolo Bonzini:
"These are the non-x86 changes (mostly ARM, as is usually the case).
The generic and x86 changes will come later"
ARM:
- New Stage-2 page table dumper, reusing the main ptdump
infrastructure
- FP8 support
- Nested virtualization now supports the address translation
(FEAT_ATS1A) family of instructions
- Add selftest checks for a bunch of timer emulation corner cases
- Fix multiple cases where KVM/arm64 doesn't correctly handle the
guest trying to use a GICv3 that wasn't advertised
- Remove REG_HIDDEN_USER from the sysreg infrastructure, making
things little simpler
- Prevent MTE tags being restored by userspace if we are actively
logging writes, as that's a recipe for disaster
- Correct the refcount on a page that is not considered for MTE tag
copying (such as a device)
- When walking a page table to split block mappings, synchronize only
at the end the walk rather than on every store
- Fix boundary check when transfering memory using FFA
- Fix pKVM TLB invalidation, only affecting currently out of tree
code but worth addressing for peace of mind
LoongArch:
- Revert qspinlock to test-and-set simple lock on VM.
- Add Loongson Binary Translation extension support.
- Add PMU support for guest.
- Enable paravirt feature control from VMM.
- Implement function kvm_para_has_feature().
RISC-V:
- Fix sbiret init before forwarding to userspace
- Don't zero-out PMU snapshot area before freeing data
- Allow legacy PMU access from guest
- Fix to allow hpmcounter31 from the guest"
* tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (64 commits)
LoongArch: KVM: Implement function kvm_para_has_feature()
LoongArch: KVM: Enable paravirt feature control from VMM
LoongArch: KVM: Add PMU support for guest
KVM: arm64: Get rid of REG_HIDDEN_USER visibility qualifier
KVM: arm64: Simplify visibility handling of AArch32 SPSR_*
KVM: arm64: Simplify handling of CNTKCTL_EL12
LoongArch: KVM: Add vm migration support for LBT registers
LoongArch: KVM: Add Binary Translation extension support
LoongArch: KVM: Add VM feature detection function
LoongArch: Revert qspinlock to test-and-set simple lock on VM
KVM: arm64: Register ptdump with debugfs on guest creation
arm64: ptdump: Don't override the level when operating on the stage-2 tables
arm64: ptdump: Use the ptdump description from a local context
arm64: ptdump: Expose the attribute parsing functionality
KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer
KVM: arm64: Move pagetable definitions to common header
KVM: arm64: nv: Add support for FEAT_ATS1A
KVM: arm64: nv: Plumb handling of AT S1* traps from EL2
KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3
KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.12
1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().
|
|
Hook up the generic vDSO implementation to the aarch64 vDSO data page.
The _vdso_rng_data required data is placed within the _vdso_data vvar
page, by using a offset larger than the vdso_data.
The vDSO function requires a ChaCha20 implementation that does not write
to the stack, and that can do an entire ChaCha20 permutation. The one
provided uses NEON on the permute operation, with a fallback to the
syscall for chips that do not support AdvSIMD.
This also passes the vdso_test_chacha test along with
vdso_test_getrandom. The vdso_test_getrandom bench-single result on
Neoverse-N1 shows:
vdso: 25000000 times in 0.783884250 seconds
libc: 25000000 times in 8.780275399 seconds
syscall: 25000000 times in 8.786581518 seconds
A small fixup to arch/arm64/include/asm/mman.h was required to avoid
pulling kernel code into the vDSO, similar to what's already done in
arch/arm64/include/asm/rwonce.h.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Currently alternative_has_cap_unlikely() can be used in VDSO code, but
alternative_has_cap_likely() cannot as it references alt_cb_patch_nops,
which is not available when linking the VDSO. This is unfortunate as it
would be useful to have alternative_has_cap_likely() available in VDSO
code.
The use of alt_cb_patch_nops was added in commit:
d926079f17bf8aa4 ("arm64: alternatives: add shared NOP callback")
... as removing duplicate NOPs within the kernel Image saved areasonable
amount of space.
Given the VDSO code will have nowhere near as many alternative branches
as the main kernel image, this isn't much of a concern, and a few extra
nops isn't a massive problem.
Change alternative_has_cap_likely() to only use alt_cb_patch_nops for
the main kernel image, and allow duplicate NOPs in VDSO code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Add all of the flags that are needed to support the shadow call stack
(SCS) sanitizer with Rust, and updates Kconfig to allow only
configurations that work.
The -Zfixed-x18 flag is required to use SCS on arm64, and requires rustc
version 1.80.0 or greater. This restriction is reflected in Kconfig.
When CONFIG_DYNAMIC_SCS is enabled, the build will be configured to
include unwind tables in the build artifacts. Dynamic SCS uses the
unwind tables at boot to find all places that need to be patched. The
-Cforce-unwind-tables=y flag ensures that unwind tables are available
for Rust code.
In non-dynamic mode, the -Zsanitizer=shadow-call-stack flag is what
enables the SCS sanitizer. Using this flag requires rustc version 1.82.0
or greater on the targets used by Rust in the kernel. This restriction
is reflected in Kconfig.
It is possible to avoid the requirement of rustc 1.80.0 by using
-Ctarget-feature=+reserve-x18 instead of -Zfixed-x18. However, this flag
emits a warning during the build, so this patch does not add support for
using it and instead requires 1.80.0 or greater.
The dependency is placed on `select HAVE_RUST` to avoid a situation
where enabling Rust silently turns off the sanitizer. Instead, turning
on the sanitizer results in Rust being disabled. We generally do not
want changes to CONFIG_RUST to result in any mitigations being changed
or turned off.
At the time of writing, rustc 1.82.0 only exists via the nightly release
channel. There is a chance that the -Zsanitizer=shadow-call-stack flag
will end up needing 1.83.0 instead, but I think it is small.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240829-shadow-call-stack-v7-1-2f62a4432abf@google.com
[ Fixed indentation using spaces. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.12 part 2
ARM64 device tree and binding-only changes
- Add system and pin voltage regulator supplies for NanoPi NEO Plus2
* tag 'sunxi-dt-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
Link: https://lore.kernel.org/r/ZuKmwD8VQrvNx8ir@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* for-next/timers:
arm64: Implement prctl(PR_{G,S}ET_TSC)
|
|
* for-next/poe: (31 commits)
arm64: pkeys: remove redundant WARN
kselftest/arm64: Add test case for POR_EL0 signal frame records
kselftest/arm64: parse POE_MAGIC in a signal frame
kselftest/arm64: add HWCAP test for FEAT_S1POE
selftests: mm: make protection_keys test work on arm64
selftests: mm: move fpregs printing
kselftest/arm64: move get_header()
arm64: add Permission Overlay Extension Kconfig
arm64: enable PKEY support for CPUs with S1POE
arm64: enable POE and PIE to coexist
arm64/ptrace: add support for FEAT_POE
arm64: add POE signal support
arm64: implement PKEYS support
arm64: add pte_access_permitted_no_overlay()
arm64: handle PKEY/POE faults
arm64: mask out POIndex when modifying a PTE
arm64: convert protection key into vm_flags and pgprot values
arm64: add POIndex defines
arm64: re-order MTE VM_ flags
arm64: enable the Permission Overlay Extension for EL0
...
|
|
* for-next/pkvm-guest:
arm64: smccc: Reserve block of KVM "vendor" services for pKVM hypercalls
drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall
arm64: mm: Add confidential computing hook to ioremap_prot()
drivers/virt: pkvm: Hook up mem_encrypt API using pKVM hypercalls
arm64: mm: Add top-level dispatcher for internal mem_encrypt API
drivers/virt: pkvm: Add initial support for running as a protected guest
firmware/smccc: Call arch-specific hook on discovering KVM services
|
|
* for-next/perf: (33 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
perf/arm-cmn: Ensure dtm_idx is big enough
perf/arm-cmn: Fix CCLA register offset
perf/arm-cmn: Refactor node ID handling. Again.
drivers/perf: hisi_pcie: Export supported Root Ports [bdf_min, bdf_max]
drivers/perf: hisi_pcie: Fix TLP headers bandwidth counting
drivers/perf: hisi_pcie: Record hardware counts correctly
drivers/perf: arm_spe: Use perf_allow_kernel() for permissions
perf/dwc_pcie: Add support for QCOM vendor devices
...
|
|
* for-next/mm:
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
|
|
* for-next/misc:
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: Constify struct kobj_type
arm64: smp: smp_send_stop() and crash_smp_send_stop() should try non-NMI first
arm64/sve: Remove unused declaration read_smcr_features()
arm64: mm: Remove unused declaration early_io_map()
arm64: el2_setup.h: Rename some labels to be more diff-friendly
arm64: signal: Fix some under-bracketed UAPI macros
arm64/mm: Drop TCR_SMP_FLAGS
arm64/mm: Drop PMD_SECT_VALID
|
|
This patch fixes the following warning by adding __force
to the cast:
arch/arm64/kernel/hibernate.c:410:44: sparse: warning: cast from restricted gfp_t
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20240910232507.313555-1-minhuadotchen@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* kvm-arm64/visibility-cleanups:
: .
: Remove REG_HIDDEN_USER from the sysreg infrastructure, making things
: a little more simple. From the cover letter:
:
: "Since 4d4f52052ba8 ("KVM: arm64: nv: Drop EL12 register traps that are
: redirected to VNCR") and the admission that KVM would never be supporting
: the original FEAT_NV, REG_HIDDEN_USER only had a few users, all of which
: could either be replaced by a more ad-hoc mechanism, or removed altogether."
: .
KVM: arm64: Get rid of REG_HIDDEN_USER visibility qualifier
KVM: arm64: Simplify visibility handling of AArch32 SPSR_*
KVM: arm64: Simplify handling of CNTKCTL_EL12
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/s2-ptdump:
: .
: Stage-2 page table dumper, reusing the main ptdump infrastructure,
: courtesy of Sebastian Ene. From the cover letter:
:
: "This series extends the ptdump support to allow dumping the guest
: stage-2 pagetables. When CONFIG_PTDUMP_STAGE2_DEBUGFS is enabled, ptdump
: registers the new following files under debugfs:
: - /sys/debug/kvm/<guest_id>/stage2_page_tables
: - /sys/debug/kvm/<guest_id>/stage2_levels
: - /sys/debug/kvm/<guest_id>/ipa_range
:
: This allows userspace tools (eg. cat) to dump the stage-2 pagetables by
: reading the 'stage2_page_tables' file.
: [...]"
: .
KVM: arm64: Register ptdump with debugfs on guest creation
arm64: ptdump: Don't override the level when operating on the stage-2 tables
arm64: ptdump: Use the ptdump description from a local context
arm64: ptdump: Expose the attribute parsing functionality
KVM: arm64: Move pagetable definitions to common header
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-at-pan:
: .
: Add NV support for the AT family of instructions, which mostly results
: in adding a page table walker that deals with most of the complexity
: of the architecture.
:
: From the cover letter:
:
: "Another task that a hypervisor supporting NV on arm64 has to deal with
: is to emulate the AT instruction, because we multiplex all the S1
: translations on a single set of registers, and the guest S2 is never
: truly resident on the CPU.
:
: So given that we lie about page tables, we also have to lie about
: translation instructions, hence the emulation. Things are made
: complicated by the fact that guest S1 page tables can be swapped out,
: and that our shadow S2 is likely to be incomplete. So while using AT
: to emulate AT is tempting (and useful), it is not going to always
: work, and we thus need a fallback in the shape of a SW S1 walker."
: .
KVM: arm64: nv: Add support for FEAT_ATS1A
KVM: arm64: nv: Plumb handling of AT S1* traps from EL2
KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3
KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration
KVM: arm64: nv: Add SW walker for AT S1 emulation
KVM: arm64: nv: Make ps_to_output_size() generally available
KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W}
KVM: arm64: nv: Add basic emulation of AT S1E2{R,W}
KVM: arm64: nv: Add basic emulation of AT S1E1{R,W}P
KVM: arm64: nv: Add basic emulation of AT S1E{0,1}{R,W}
KVM: arm64: nv: Honor absence of FEAT_PAN2
KVM: arm64: nv: Turn upper_attr for S2 walk into the full descriptor
KVM: arm64: nv: Enforce S2 alignment when contiguous bit is set
arm64: Add ESR_ELx_FSC_ADDRSZ_L() helper
arm64: Add system register encoding for PSTATE.PAN
arm64: Add PAR_EL1 field description
arm64: Add missing APTable and TCR_ELx.HPD masks
KVM: arm64: Make kvm_at() take an OP_AT_*
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/nested.c
|
|
* kvm-arm64/vgic-sre-traps:
: .
: Fix the multiple of cases where KVM/arm64 doesn't correctly
: handle the guest trying to use a GICv3 that isn't advertised.
:
: From the cover letter:
:
: "It recently appeared that, when running on a GICv3-equipped platform
: (which is what non-ancient arm64 HW has), *not* configuring a GICv3
: for the guest could result in less than desirable outcomes.
:
: We have multiple issues to fix:
:
: - for registers that *always* trap (the SGI registers) or that *may*
: trap (the SRE register), we need to check whether a GICv3 has been
: instantiated before acting upon the trap.
:
: - for registers that only conditionally trap, we must actively trap
: them even in the absence of a GICv3 being instantiated, and handle
: those traps accordingly.
:
: - finally, ID registers must reflect the absence of a GICv3, so that
: we are consistent.
:
: This series goes through all these requirements. The main complexity
: here is to apply a GICv3 configuration on the host in the absence of a
: GICv3 in the guest. This is pretty hackish, but I don't have a much
: better solution so far.
:
: As part of making wider use of of the trap bits, we fully define the
: trap routing as per the architecture, something that we eventually
: need for NV anyway."
: .
KVM: arm64: selftests: Cope with lack of GICv3 in set_id_regs
KVM: arm64: Add selftest checking how the absence of GICv3 is handled
KVM: arm64: Unify UNDEF injection helpers
KVM: arm64: Make most GICv3 accesses UNDEF if they trap
KVM: arm64: Honor guest requested traps in GICv3 emulation
KVM: arm64: Add trap routing information for ICH_HCR_EL2
KVM: arm64: Add ICH_HCR_EL2 to the vcpu state
KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest
KVM: arm64: Add helper for last ditch idreg adjustments
KVM: arm64: Force GICv3 trap activation when no irqchip is configured on VHE
KVM: arm64: Force SRE traps when SRE access is not enabled
KVM: arm64: Move GICv3 trap configuration to kvm_calculate_traps()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/fpmr:
: .
: Add FP8 support to the KVM/arm64 floating point handling.
:
: This includes new ID registers (ID_AA64PFR2_EL1 ID_AA64FPFR0_EL1)
: being made visible to guests, as well as a new confrol register
: (FPMR) which gets context-switched.
: .
KVM: arm64: Expose ID_AA64PFR2_EL1 to userspace and guests
KVM: arm64: Enable FP8 support when available and configured
KVM: arm64: Expose ID_AA64FPFR0_EL1 as a writable ID reg
KVM: arm64: Honor trap routing for FPMR
KVM: arm64: Add save/restore support for FPMR
KVM: arm64: Move FPMR into the sysreg array
KVM: arm64: Add predicate for FPMR support in a VM
KVM: arm64: Move SVCR into the sysreg array
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mmu-misc-6.12:
: .
: Various minor MMU improvements and bug-fixes:
:
: - Prevent MTE tags being restored by userspace if we are actively
: logging writes, as that's a recipe for disaster
:
: - Correct the refcount on a page that is not considered for MTE
: tag copying (such as a device)
:
: - When walking a page table to split blocks, keep the DSB at the end
: the walk, as there is no need to perform it on every store.
:
: - Fix boundary check when transfering memory using FFA
: .
KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer
KVM: arm64: Disallow copying MTE to guest memory while KVM is dirty logging
KVM: arm64: Release pfn, i.e. put page, if copying MTE tags hits ZONE_DEVICE
KVM: arm64: Move data barrier to end of split walk
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add bootloader-backdoor-gpios which is required for enabling bootloader
backdoor for flashing firmware to cc1352p7.
Also fix the incorrect reset-gpio.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240903-beagleplay_fw_upgrade-v4-2-526fc62204a7@beagleboard.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge ACPI and irqchip updates related to external interrupt controller
support on RISC-V:
- Add ACPI device enumeration support for interrupt controller probing
including taking dependencies into account (Sunil V L).
- Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L).
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L).
* acpi-riscv:
irqchip/sifive-plic: Add ACPI support
irqchip/riscv-aplic: Add ACPI support
irqchip/riscv-imsic: Add ACPI support
irqchip/riscv-imsic-state: Create separate function for DT
irqchip/riscv-intc: Add ACPI support for AIA
ACPI: RISC-V: Implement function to add implicit dependencies
ACPI: RISC-V: Initialize GSI mapping structures
ACPI: RISC-V: Implement function to reorder irqchip probe entries
ACPI: RISC-V: Implement PCI related functionality
ACPI: pci_link: Clear the dependencies after probe
ACPI: bus: Add RINTC IRQ model for RISC-V
ACPI: scan: Define weak function to populate dependencies
ACPI: scan: Add RISC-V interrupt controllers to honor list
ACPI: scan: Refactor dependency creation
ACPI: bus: Add acpi_riscv_init() function
ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe
arm64: PCI: Migrate ACPI related functions to pci-acpi.c
|
|
Now that REG_HIDDEN_USER has no direct user anymore, remove it
entirely and update all users of sysreg_hidden_user() to call
sysreg_hidden() instead.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240904082419.1982402-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since SPSR_* are not associated with any register in the sysreg array,
nor do they have .get_user()/.set_user() helpers, they are invisible to
userspace with that encoding.
Therefore hidden_user_visibility() serves no purpose here, and can be
safely removed.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240904082419.1982402-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We go trough a great deal of effort to map CNTKCTL_EL12 to CNTKCTL_EL1
while hidding this mapping from userspace via a special visibility helper.
However, it would be far simpler to just provide an accessor doing the
mapping job, removing the need for a visibility helper.
With that done, we can also remove the EL12_REG() macro which serves
no purpose.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240904082419.1982402-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig
mt8365:
- Enable audio handled by the SoC and the PMIC codec.
* tag 'v6.11-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: defconfig: enable mt8365 sound
Link: https://lore.kernel.org/r/ea168bd6-b54b-47d3-ba5d-e545a9b406c1@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pin controllers pio and r_pio will have proper regulators assigned.
Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240905-nanopi-neo-plus2-regfix-v3-2-1895dff59598@gmail.com
[wens@csie.org: Make "h5" lowercase to match most commits]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64 SoCs Device Tree changes for
6.12, please pull the following:
- Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712)
- Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to
conform to the binding changes
* tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837/bcm2712: adjust local intc node names
arm64: dts: broadcom: Add minimal support for Raspberry Pi 5
Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
mt63xx:
- add ADC node to the different PMICs
mt7981:
- Add SPI controller nodes.
mt8183:
- use referenced label for DSI endpoint.
- disable soc_data efuse node, which does not has any cell definde
(kukui).
- fix the regulator tree (kukui).
- fix potential deadlock by removing not needed clock in the MFG async
power domain.
- add DPI node.
mt8186:
- fix opp-supported-hw mask for GPU.
- add lvts thermal sensor node.
- add thermal zones.
- fix reserved memory region of ADSP firmware (corsola).
- add power domain to DPI node.
- add SVS node.
- fix internal display by disabling the external display temporarily
(corsola).
mt8188:
- add thermal sensor for the AP.
- add thermal zones.
mt8195:
- fix pull resistance for hdmi pins (cherry).
- remove keyboard backlight node (cherry), this is detected through
ChromeOS EC communication.
- fix warning in mdp3 driver by providing a phandel to the SCP.
- fix probe error of the USB controller by disabeling USB3 on the
controller (cherry).
- assign per default both phys to the USB controller (cherry).
- fix binding validation by re-ordering the dp_intf clocks.
mt8365:
- add AFE audio controller.
- add AFE and audio codec support (evk).
mt8395:
- fix probe error of the USB controller by disabeling USB3 on the
controller (radax-nio-12l).
- assign per default both phys to the USB controller (genio, kontron,
radax).
* tag 'v6.11-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (25 commits)
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: mediatek: mt8186-corsola: Update ADSP reserved memory region
arm64: dts: mediatek: mt8183: Remove clock from mfg_async power domain
arm64: dts: mt8183-kukui: clean up regulator tree
arm64: dts: mediatek: mt7981: add SPI controllers
arm64: dts: mediatek: mt8183-kukui: Disable unused efuse at 8000000
arm64: dts: mediatek: mt8188: add default thermal zones
arm64: dts: mediatek: mt8188: add lvts definitions
arm64: dts: mediatek: mt8186: add default thermal zones
arm64: dts: mediatek: mt8186: add lvts definitions
arm64: dts: mediatek: mt8195: Assign USB 3.0 PHY to xhci1 by default
arm64: dts: mediatek: mt8395-nio-12l: Mark USB 3.0 on xhci1 as disabled
arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled
arm64: dts: mediatek: mt8195: Add SCP phandle to MDP3 DMA controller
...
Link: https://lore.kernel.org/r/059656ad-5365-4097-86a1-f4ba43edf5da@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588
and some non-critical dts cleanups.
* tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE
arm64: dts: rockchip: Add GameForce Ace
dt-bindings: arm: rockchip: Add GameForce Ace
arm64: dts: rockchip: rk3588s fix sdio pins to pull up
arm64: dts: rockchip: Add RGA2 support to rk3588
arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b
arm64: dts: rockchip: Add Hardkernel ODROID-M2
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2
arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6
Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.12
1. APM: correct node name to match bindings.
2. Spreadtrum: correct node names to match bindings, order properties to
match DTS coding style and put SPDX identifier at top of the file as
expected usually.
* tag 'dt64-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: sprd: move/add SPDX license to top of the file
arm64: dts: sprd: reorder clock-names after clocks
arm64: dts: sprd: rename SDHCI and fuel gauge nodes to match bindings
arm64: dts: apm: storm: Rename menetphy@3 to ethernet-phy@3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
While arch/*/mem/ptdump handles the kernel pagetable dumping code,
introduce KVM/ptdump to show the guest stage-2 pagetables. The
separation is necessary because most of the definitions from the
stage-2 pagetable reside in the KVM path and we will be invoking
functionality specific to KVM. Introduce the PTDUMP_STAGE2_DEBUGFS config.
When a guest is created, register a new file entry under the guest
debugfs dir which allows userspace to show the contents of the guest
stage-2 pagetables when accessed.
[maz: moved function prototypes from kvm_host.h to kvm_mmu.h]
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20240909124721.1672199-6-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Ptdump uses the init_mm structure directly to dump the kernel
pagetables. When ptdump is called on the stage-2 pagetables, this mm
argument is not used. Prevent the level from being overwritten by
checking the argument against NULL.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-5-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Rename the attributes description array to allow the parsing method
to use the description from a local context. To be able to do this,
store a pointer to the description array in the state structure. This
will allow for the later introduced callers (stage_2 ptdump) to specify
their own page table description format to the ptdump parser.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-4-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Reuse the descriptor parsing functionality to keep the same output format
as the original ptdump code. In order for this to happen, move the state
tracking objects into a common header.
[maz: Fixed note_page() stub as suggested by Will]
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-3-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When we share memory through FF-A and the description of the buffers
exceeds the size of the mapped buffer, the fragmentation API is used.
The fragmentation API allows specifying chunks of descriptors in subsequent
FF-A fragment calls and no upper limit has been established for this.
The entire memory region transferred is identified by a handle which can be
used to reclaim the transferred memory.
To be able to reclaim the memory, the description of the buffers has to fit
in the ffa_desc_buf.
Add a bounds check on the FF-A sharing path to prevent the memory reclaim
from failing.
Also do_ffa_mem_xfer() does not need __always_inline, except for the
BUILD_BUG_ON() aspect, which gets moved to a macro.
[maz: fixed the BUILD_BUG_ON() breakage with LLVM, thanks to Wei-Lin Chang
for the timely report]
Fixes: 634d90cf0ac65 ("KVM: arm64: Handle FFA_MEM_LEND calls from the host")
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ene <sebastianene@google.com>
Signed-off-by: Snehal Koukuntla <snehalreddy@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240909180154.3267939-1-snehalreddy@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add explicit casting to prevent expantion of 32th bit of
u32 into highest half of u64 in several places.
For example, in inject_abt64:
ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT = 0x24 << 26.
This operation's result is int with 1 in 32th bit.
While casting this value into u64 (esr is u64) 1
fills 32 highest bits.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: <stable@vger.kernel.org>
Fixes: aa8eff9bfbd5 ("arm64: KVM: fault injection into a guest")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/stable/20240910085016.32120-1-abelova%40astralinux.ru
Link: https://lore.kernel.org/r/20240910085016.32120-1-abelova@astralinux.ru
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_PAN3 is present if FEAT_S1POE is, this WARN() was to represent that.
However execute_only_pkey() is always called by mmap(), even on a CPU without
POE support.
Rather than making the WARN() conditional, just delete it.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-arm-kernel/CA+G9fYvarKEPN3u1Ogw2pcw4h6r3OMzg+5qJpYkAXRunAEF_0Q@mail.gmail.com/
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240910105004.706981-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation for using the stage-2 definitions in ptdump, move some of
these macros in the common header.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240909124721.1672199-2-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Enable the MediaTek MT8365-EVK sound support.
The audio feature is handled by the MT8365 SoC and
the MT6357 PMIC codec audio.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20240226-audio-i350-v8-3-e80a57d026ce@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
