| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bug fixes on top of -rc1, as most of
them were ready but didn't quite make it into the last-minute pull
requests for the merge window.
Allwinner:
- fix for incorrect CPU overtemperature limit
Amlogic:
- multiple smaller DT bugfixes, and missing device nodes
Marvell EBU:
- add missing aliases for ethernet switch ports on espressobin board
Marvell MMP:
- DTC warning fix
- bugfix for camera interface power-down
NXP i.MX:
- re-enable the GPIO driver on all defconfigs
ST STM32MP1:
- fix random crashes from incorrect voltage settings
Synaptics Berlin:
- enable the correct hardware timer driver
Texas Instruments K2G:
- fix a boot regression in the power domain code
TEE drivers:
- fix regression in TEE "login" method
SCMI drivers:
- multiple code fixes for corner cases in newly added code
MAINTAINERS file:
- move Kukjin Kim and Sangbeom Kim to credits (used to work on
Samsung Exynos)
- Masahiro Yamada is stepping down as Uniphier maintainer
I did not include a series of patches that work around a regression
caused by a bugfix in an ethernet phy driver that resulted in an
inadvertent DT binding change. This is still under discussion"
* tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: ti: ti_sci_pm_domains: check for proper args count in xlate
ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"
ARM: dts: mmp3: Add power domain for the camera
arm64: berlin: Select DW_APB_TIMER_OF
dt-bindings: sram: sunxi-sram: add V3s compatible string
MAINTAINERS: Move Sangbeom Kim to credits
MAINTAINERS: Move Kukjin Kim to credits
MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver
ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
arm64: defconfig: Build in CONFIG_GPIO_MXC by default
arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: amlogic: add missing ethernet reset ID
firmware: arm_scmi: Fix duplicate workqueue name
firmware: arm_scmi: Fix locking in notifications
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes
STM32 DT fixes for v5.10, round 1
Highlights:
-----------
-On STM32MP157 DK & ED boards: Add Vin supply description to avoid
random kernel crash due to vref_ddr regulator issue.
* tag 'stm32-dt-for-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
Link: https://lore.kernel.org/r/4ac236b3-b980-f653-f644-53e586570724@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
After turning on warnings for orphan section placement, enabling
CONFIG_UNWINDER_FRAME_POINTER instead of CONFIG_UNWINDER_ARM causes
thousands of warnings when clang + ld.lld are used:
$ scripts/config --file arch/arm/configs/multi_v7_defconfig \
-d CONFIG_UNWINDER_ARM \
-e CONFIG_UNWINDER_FRAME_POINTER
$ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 defconfig zImage
ld.lld: warning: init/built-in.a(main.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.ref.text) is being placed in '.ARM.extab.ref.text'
ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(do_mounts_initrd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab) is being placed in '.ARM.extab'
These sections are handled by the ARM_UNWIND_SECTIONS define, which is
only added to the list of sections when CONFIG_ARM_UNWIND is set.
CONFIG_ARM_UNWIND is a hidden symbol that is only selected when
CONFIG_UNWINDER_ARM is set so CONFIG_UNWINDER_FRAME_POINTER never
handles these sections. According to the help text of
CONFIG_UNWINDER_ARM, these sections should be discarded so that the
kernel image size is not affected.
Fixes: 5a17850e251a ("arm/build: Warn on orphan section placement")
Link: https://github.com/ClangBuiltLinux/linux/issues/1152
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Review-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
[kees: Made the discard slightly more specific]
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200928224854.3224862-1-natechancellor@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.10, 2nd round:
A couple of more defconfig fixes to enable CONFIG_GPIO_MXC option for
i.MX ARMv4/v5 devices.
* tag 'imx-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
Link: https://lore.kernel.org/r/20201026235230.GL9880@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 12d16b397ce0 ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since commit 12d16b397ce0 ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.10:
With commit 12d16b397ce0 ("gpio: mxc: Support module build") in place,
GPIO_MXC has no 'def_bool y' anymore, and needs to be enabled by
defconfig. It updates the defconfig files to explicitly enable the
option for fixing boot failure on i.MX platform.
* tag 'imx-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
arm64: defconfig: Build in CONFIG_GPIO_MXC by default
Link: https://lore.kernel.org/r/20201026135601.GA32675@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This makes validation happier.
Link: https://lore.kernel.org/r/20200925234805.228251-3-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The camera interfaces on MMP3 are on a separate power island that needs
to be turned on for them to operate and, ideally, turned off when the
cameras are not in use.
This hooks the power island with the camera interfaces in the device
tree.
Link: https://lore.kernel.org/r/20200925234805.228251-2-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One fix for an unreasonable thermal trip point on the A10
* tag 'sunxi-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun4i-a10: fix cpu_alert temperature
Link: https://lore.kernel.org/r/3c95a95f-c6fa-4b34-823b-ddaa7660d274.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 5.9 (part 1)
- Allow to use correct MAC address for particular DSA slaves /
ethernet ports on Espressobin (Armada 3720)
- Remove incorrect check in ll_get_coherency_base() used for Armada
370/XP SoCs.
* tag 'mvebu-fixes-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: mvebu: drop pointless check for coherency_base
arm64: dts: marvell: espressobin: Add ethernet switch aliases
Link: https://lore.kernel.org/r/87y2kkesj5.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull dma-mapping fixes from Christoph Hellwig:
- document the new dma_{alloc,free}_pages() API
- two fixups for the dma-mapping.h split
* tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: document dma_{alloc,free}_pages
dma-mapping: move more functions to dma-map-ops.h
ARM/sa1111: add a missing include of dma-map-ops.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: multi_v7_defconfig: add FMC2 EBI controller support
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable Qcom SNPS Femto PHY
ARM: configs: Update Realview defconfig
ARM: configs: Update Versatile defconfig
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
...
|
|
Pull ARM Devicetree updates from Olof Johansson:
"As usual, most of the changes are to devicetrees.
Besides smaller fixes, some refactorings and cleanups, some of the new
platforms and chips (or significant features) supported are below:
Broadcom boards:
- Cisco Meraki MR32 (BCM53016-based)
- BCM2711 (RPi4) display pipeline support
Actions Semi boards:
- Caninos Loucos Labrador SBC (S500-based)
- RoseapplePi SBC (S500-based)
Allwinner SoCs/boards:
- A100 SoC with Perf1 board
- Mali, DMA, Cetrus and IR support for R40 SoC
Amlogic boards:
- Libretch S905x CC V2 board
- Hardkernel ODROID-N2+ board
Aspeed boards/platforms:
- Wistron Mowgli (AST2500-based, Power9 OpenPower server)
- Facebook Wedge400 (AST2500-based, ToR switch)
Hisilicon SoC:
- SD5203 SoC
Nvidia boards:
- Tegra234 VDK, for pre-silicon Orin SoC
NXP i.MX boards:
- Librem 5 phone
- i.MX8MM DDR4 EVK
- Variscite VAR-SOM-MX8MN SoM
- Symphony board
- Tolino Shine 2 HD
- TQMa6 SoM
- Y Soft IOTA Orion
Rockchip boards:
- NanoPi R2S board
- A95X-Z2 board
- more Rock-Pi4 variants
STM32 boards:
- Odyssey SOM board (STM32MP157CAC-based)
- DH DRC02 board
Toshiba SoCs/boards:
- Visconti SoC and TPMV7708 board"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
ARM: dts: nspire: Fix SP804 users
arm64: dts: lg: Fix SP804 users
arm64: dts: lg: Fix SP805 clocks
ARM: mstar: Fix up the fallout from moving the dts/dtsi files
ARM: mstar: Add mstar prefix to all of the dtsi/dts files
ARM: mstar: Add interrupt to pm_uart
ARM: mstar: Add interrupt controller to base dtsi
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
arm64: dts: ti: k3-j7200-main: Add USB controller
arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
arm64: dts: zynqmp: Remove undocumented u-boot properties
arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
...
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I had queued up a batch of fixes that got a bit close to the release
for sending in before the merge window opened, so I'm including them
in the merge window batch instead.
Mostly smaller DT tweaks and fixes, the usual mix that we tend to have
through the releases"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2
soc: actions: include header to fix missing prototype
arm64: dts: ti: k3-j721e: Rename mux header and update macro names
soc: qcom: pdr: Fixup array type of get_domain_list_resp message
arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
arm64: dts: sdm630: Temporarily disable SMMUs by default
arm64: dts: sdm845: Fixup OPP table for all qup devices
arm64: dts: allwinner: h5: remove Mali GPU PMU module
ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
soc: xilinx: Fix error code in zynqmp_pm_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros-ec:
- Error code cleanup across cros-ec by Guenter
- Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status
cros_ec_typec:
- Landed initial USB4 support in typec connector class driver for
cros_ec
- Role switch bugfix on disconnect, and reordering configuration
steps
cros_ec_lightbar:
- Fix buffer outsize and result for get_lightbar_version
misc:
- Remove config MFD_CROS_EC, now that transition from MFD is complete
- Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
keymap"
* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
platform/chrome: Use kobj_to_dev() instead of container_of()
platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
platform/chrome: cros_ec_trace: Add fields to command traces
platform/chrome: cros_ec_typec: Re-order connector configuration steps
platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
platform/chrome: cros_ec_typec: USB4 support
pwm: cros-ec: Simplify EC error handling
platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
platform/chrome: cros_ec_sysfs: Report range of error codes from EC
cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
|
|
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- add wireless type
- properly document current direction
Battery/charger driver changes:
- new fuel-gauge/charger driver for RN5T618/RN5T619
- new charger driver for BQ25980, BQ25975 and BQ25960
- bq27xxx-battery: add support for TI bq34z100
- gpio-charger: convert to GPIO descriptors
- gpio-charger: add optional support for charge current limiting
- max17040: add support for max17041, max17043, max17044
- max17040: add support for max17048, max17049, max17058, max17059
- smb347-charger: add DT support
- smb247-charger: add SMB345 and SMB358 support
- simple-battery: add temperature properties
- lots of minor fixes, cleanups and DT binding YAML conversions
Reset drivers:
- ocelot: Add support for Sparx5"
* tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits)
power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5
power: supply: bq25980: Fix uninitialized wd_reg_val and overrun
power: supply: ltc2941: Fix ptr to enum cast
power: supply: test-power: revise parameter printing to use sprintf
power: supply: charger-manager: fix incorrect check on charging_duration_ms
power: supply: max17040: Fix ptr to enum cast
power: supply: bq25980: Fix uninitialized wd_reg_val
power: supply: bq25980: remove redundant zero check on ret
power: reset: ocelot: Add support for Sparx5
dt-bindings: reset: ocelot: Add Sparx5 support
power: supply: sbs-battery: keep error code when get_property() fails
power: supply: bq25980: Add support for the BQ259xx family
dt-binding: bq25980: Add the bq25980 flash charger
power: supply: fix spelling mistake "unprecise" -> "imprecise"
power: supply: test_power: add missing newlines when printing parameters by sysfs
power: supply: pm2301: drop duplicated i2c_device_id
power: supply: charger-manager: drop unused charger assignment
power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI
power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI
power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI
...
|
|
Pull ARM updates from Russell King:
- handle inexact watchpoint addresses (Douglas Anderson)
- decompressor serial debug cleanups (Linus Walleij)
- update L2 cache prefetch bits (Guillaume Tucker)
- add text offset and malloc size to the decompressor kexec data
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: add malloc size to decompressor kexec size structure
ARM: add TEXT_OFFSET to decompressor kexec image structure
ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values
ARM: 9010/1: uncompress: Print the location of appended DTB
ARM: 9009/1: uncompress: Enable debug in head.S
ARM: 9008/1: uncompress: Drop excess whitespace print
ARM: 9006/1: uncompress: Wait for ready and busy in debug prints
ARM: 9005/1: debug: Select flow control for all debug UARTs
ARM: 9004/1: debug: Split waituart to CTS and TXRDY
ARM: 9003/1: uncompress: Delete unused debug macros
ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses
|
|
Ensure the dmabounce functions are available for all Kconfig
permutations.
Fixes: 0a0f0d8be76d ("dma-mapping: split <linux/dma-mapping.h>")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
asm/sections.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lkml.kernel.org/r/1600088607-17327-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is usecase that System Management Software(SMS) want to give a
memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the
case of Android, it is the ActivityManagerService.
The information required to make the reclaim decision is not known to the
app. Instead, it is known to the centralized userspace
daemon(ActivityManagerService), and that daemon must be able to initiate
reclaim on its own without any app involvement.
To solve the issue, this patch introduces a new syscall
process_madvise(2). It uses pidfd of an external process to give the
hint. It also supports vector address range because Android app has
thousands of vmas due to zygote so it's totally waste of CPU and power if
we should call the syscall one by one for each vma.(With testing 2000-vma
syscall vs 1-vector syscall, it showed 15% performance improvement. I
think it would be bigger in real practice because the testing ran very
cache friendly environment).
Another potential use case for the vector range is to amortize the cost
ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could
benefit users like TCP receive zerocopy and malloc implementations. In
future, we could find more usecases for other advises so let's make it
happens as API since we introduce a new syscall at this moment. With
that, existing madvise(2) user could replace it with process_madvise(2)
with their own pid if they want to have batch address ranges support
feature.
ince it could affect other process's address range, only privileged
process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same
UID) gives it the right to ptrace the process could use it successfully.
The flag argument is reserved for future use if we need to extend the API.
I think supporting all hints madvise has/will supported/support to
process_madvise is rather risky. Because we are not sure all hints make
sense from external process and implementation for the hint may rely on
the caller being in the current context so it could be error-prone. Thus,
I just limited hints as MADV_[COLD|PAGEOUT] in this patch.
If someone want to add other hints, we could hear the usecase and review
it for each hint. It's safer for maintenance rather than introducing a
buggy syscall but hard to fix it later.
So finally, the API is as follows,
ssize_t process_madvise(int pidfd, const struct iovec *iovec,
unsigned long vlen, int advice, unsigned int flags);
DESCRIPTION
The process_madvise() system call is used to give advice or directions
to the kernel about the address ranges from external process as well as
local process. It provides the advice to address ranges of process
described by iovec and vlen. The goal of such advice is to improve
system or application performance.
The pidfd selects the process referred to by the PID file descriptor
specified in pidfd. (See pidofd_open(2) for further information)
The pointer iovec points to an array of iovec structures, defined in
<sys/uio.h> as:
struct iovec {
void *iov_base; /* starting address */
size_t iov_len; /* number of bytes to be advised */
};
The iovec describes address ranges beginning at address(iov_base)
and with size length of bytes(iov_len).
The vlen represents the number of elements in iovec.
The advice is indicated in the advice argument, which is one of the
following at this moment if the target process specified by pidfd is
external.
MADV_COLD
MADV_PAGEOUT
Permission to provide a hint to external process is governed by a
ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2).
The process_madvise supports every advice madvise(2) has if target
process is in same thread group with calling process so user could
use process_madvise(2) to extend existing madvise(2) to support
vector address ranges.
RETURN VALUE
On success, process_madvise() returns the number of bytes advised.
This return value may be less than the total number of requested
bytes, if an error occurred. The caller should check return value
to determine whether a partial advice occurred.
FAQ:
Q.1 - Why does any external entity have better knowledge?
Quote from Sandeep
"For Android, every application (including the special SystemServer)
are forked from Zygote. The reason of course is to share as many
libraries and classes between the two as possible to benefit from the
preloading during boot.
After applications start, (almost) all of the APIs end up calling into
this SystemServer process over IPC (binder) and back to the
application.
In a fully running system, the SystemServer monitors every single
process periodically to calculate their PSS / RSS and also decides
which process is "important" to the user for interactivity.
So, because of how these processes start _and_ the fact that the
SystemServer is looping to monitor each process, it does tend to *know*
which address range of the application is not used / useful.
Besides, we can never rely on applications to clean things up
themselves. We've had the "hey app1, the system is low on memory,
please trim your memory usage down" notifications for a long time[1].
They rely on applications honoring the broadcasts and very few do.
So, if we want to avoid the inevitable killing of the application and
restarting it, some way to be able to tell the OS about unimportant
memory in these applications will be useful.
- ssp
Q.2 - How to guarantee the race(i.e., object validation) between when
giving a hint from an external process and get the hint from the target
process?
process_madvise operates on the target process's address space as it
exists at the instant that process_madvise is called. If the space
target process can run between the time the process_madvise process
inspects the target process address space and the time that
process_madvise is actually called, process_madvise may operate on
memory regions that the calling process does not expect. It's the
responsibility of the process calling process_madvise to close this
race condition. For example, the calling process can suspend the
target process with ptrace, SIGSTOP, or the freezer cgroup so that it
doesn't have an opportunity to change its own address space before
process_madvise is called. Another option is to operate on memory
regions that the caller knows a priori will be unchanged in the target
process. Yet another option is to accept the race for certain
process_madvise calls after reasoning that mistargeting will do no
harm. The suggested API itself does not provide synchronization. It
also apply other APIs like move_pages, process_vm_write.
The race isn't really a problem though. Why is it so wrong to require
that callers do their own synchronization in some manner? Nobody
objects to write(2) merely because it's possible for two processes to
open the same file and clobber each other's writes --- instead, we tell
people to use flock or something. Think about mmap. It never
guarantees newly allocated address space is still valid when the user
tries to access it because other threads could unmap the memory right
before. That's where we need synchronization by using other API or
design from userside. It shouldn't be part of API itself. If someone
needs more fine-grained synchronization rather than process level,
there were two ideas suggested - cookie[2] and anon-fd[3]. Both are
applicable via using last reserved argument of the API but I don't
think it's necessary right now since we have already ways to prevent
the race so don't want to add additional complexity with more
fine-grained optimization model.
To make the API extend, it reserved an unsigned long as last argument
so we could support it in future if someone really needs it.
Q.3 - Why doesn't ptrace work?
Injecting an madvise in the target process using ptrace would not work
for us because such injected madvise would have to be executed by the
target process, which means that process would have to be runnable and
that creates the risk of the abovementioned race and hinting a wrong
VMA. Furthermore, we want to act the hint in caller's context, not the
callee's, because the callee is usually limited in cpuset/cgroups or
even freezed state so they can't act by themselves quick enough, which
causes more thrashing/kill. It doesn't work if the target process are
ptraced(e.g., strace, debugger, minidump) because a process can have at
most one ptracer.
[1] https://developer.android.com/topic/performance/memory"
[2] process_getinfo for getting the cookie which is updated whenever
vma of process address layout are changed - Daniel Colascione -
https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224
[3] anonymous fd which is used for the object(i.e., address range)
validation - Michal Hocko -
https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/
[minchan@kernel.org: fix process_madvise build break for arm64]
Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com
[minchan@kernel.org: fix build error for mips of process_madvise]
Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com
[akpm@linux-foundation.org: fix patch ordering issue]
[akpm@linux-foundation.org: fix arm64 whoops]
[minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian]
[akpm@linux-foundation.org: fix i386 build]
[sfr@canb.auug.org.au: fix syscall numbering]
Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au
[sfr@canb.auug.org.au: madvise.c needs compat.h]
Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au
[minchan@kernel.org: fix mips build]
Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com
[yuehaibing@huawei.com: remove duplicate header which is included twice]
Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com
[minchan@kernel.org: do not use helper functions for process_madvise]
Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com
[akpm@linux-foundation.org: pidfd_get_pid() gained an argument]
[sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"]
Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.au
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com
Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All the callers currently do this, clean it up and move the clearing
into tracehook_notify_resume() instead.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
- toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
- toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
HyperBus changes:
- DMA support for TI's AM654 HyperBus controller driver.
- HyperBus frontend driver for Renesas RPC-IF driver.
SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d
SPI NOR controller drivers changes:
- intel-spi Add Alder Lake-S PCI ID
MTD Core changes:
- mtdoops: Don't run panic write twice
- mtdconcat: Correctly handle panic write
- Use DEFINE_SHOW_ATTRIBUTE"
* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
mtd: hyperbus: add Renesas RPC-IF driver
Revert "mtd: spi-nor: Prefer asynchronous probe"
mtd: parsers: bcm63xx: Do not make it modular
mtd: spear_smi: Enable compile testing
mtd: maps: vmu-flash: fix typos for struct memcard
mtd: physmap: Add Baikal-T1 physically mapped ROM support
mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
mtd: rawnand: cadence: remove a redundant dev_err call
mtd: rawnand: ams-delta: Fix non-OF build warning
mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
mtd: rawnand: atmel: Check return values for nand_read_data_op
mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
mtd: rawnand: qcom: Simplify with dev_err_probe()
mtd: rawnand: marvell: Fix and update kerneldoc
mtd: rawnand: marvell: Simplify with dev_err_probe()
mtd: rawnand: gpmi: Simplify with dev_err_probe()
mtd: rawnand: atmel: Simplify with dev_err_probe()
...
|
|
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.
Therefore, let's move the smartreflex driver for OMAP to the ti directory.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when
a device tries DMA on memory owned by a guest. This needs new
fault-types as well as a rewrite of the IOMMU memory semaphore for
command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to still be
used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can access
address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
* tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits)
iommu/vt-d: Gracefully handle DMAR units with no supported address widths
iommu/vt-d: Check UAPI data processed by IOMMU core
iommu/uapi: Handle data and argsz filled by users
iommu/uapi: Rename uapi functions
iommu/uapi: Use named union for user data
iommu/uapi: Add argsz for user filled data
docs: IOMMU user API
iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
iommu/arm-smmu-v3: Add SVA device feature
iommu/arm-smmu-v3: Check for SVA features
iommu/arm-smmu-v3: Seize private ASID
iommu/arm-smmu-v3: Share process page tables
iommu/arm-smmu-v3: Move definitions to a header
iommu/io-pgtable-arm: Move some definitions to a header
iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer
iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB
iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR
iommu/amd: Use 4K page for completion wait write-back semaphore
iommu/tegra-smmu: Allow to group clients in same swgroup
iommu/tegra-smmu: Fix iova->phys translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- two small cleanup patches
- avoid error messages when initializing MCA banks in a Xen dom0
- a small series for converting the Xen gntdev driver to use
pin_user_pages*() instead of get_user_pages*()
- intermediate fix for running as a Xen guest on Arm with KPTI enabled
(the final solution will need new Xen functionality)
* tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Fix typo in xen_pagetable_p2m_free()
x86/xen: disable Firmware First mode for correctable memory errors
xen/arm: do not setup the runstate info page if kpti is enabled
xen: remove redundant initialization of variable ret
xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*()
xen/gntdev.c: Mark pages as dirty
|
|
Merge misc updates from Andrew Morton:
"181 patches.
Subsystems affected by this patch series: kbuild, scripts, ntfs,
ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
memory-failure, vmallo and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
mm/migrate: remove obsolete comment about device public
mm/migrate: remove cpages-- in migrate_vma_finalize()
mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
memblock: use separate iterators for memory and reserved regions
memblock: implement for_each_reserved_mem_region() using __next_mem_region()
memblock: remove unused memblock_mem_size()
x86/setup: simplify reserve_crashkernel()
x86/setup: simplify initrd relocation and reservation
arch, drivers: replace for_each_membock() with for_each_mem_range()
arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
memblock: reduce number of parameters in for_each_mem_range()
memblock: make memblock_debug and related functionality private
memblock: make for_each_memblock_type() iterator private
mircoblaze: drop unneeded NUMA and sparsemem initializations
riscv: drop unneeded node initialization
h8300, nds32, openrisc: simplify detection of memory extents
arm64: numa: simplify dummy_numa_init()
arm, xtensa: simplify initialization of high memory pages
dma-contiguous: simplify cma_early_percent_memory()
KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
...
|
|
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));
/* do something with start and end */
}
Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.
[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
/* do something with start_pfn and end_pfn */
}
Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
free_highpages() in both arm and xtensa essentially open-code
for_each_free_mem_range() loop to detect high memory pages that were not
reserved and that should be initialized and passed to the buddy allocator.
Replace open-coded implementation of for_each_free_mem_range() with usage
of memblock API to simplify the code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We account the PTE level of the page tables to the process in order to
make smarter OOM decisions and help diagnose why memory is fragmented.
For these same reasons, we should account pages allocated for PMDs. With
larger process address spaces and ASLR, the number of PMDs in use is
higher than it used to be so the inaccuracy is starting to matter.
[rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor]
Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
or newer"
This partially reverts commit b0fe66cf095016e0b238374c10ae366e1f087d11.
The minimum supported version of clang is now clang 10.0.1. We still
want to pass -meabi=gnu.
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200902225911.209899-6-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"The bulk of the changes are with the seccomp selftests to accommodate
some powerpc-specific behavioral characteristics. Additional cleanups,
fixes, and improvements are also included:
- heavily refactor seccomp selftests (and clone3 selftests
dependency) to fix powerpc (Kees Cook, Thadeu Lima de Souza
Cascardo)
- fix style issue in selftests (Zou Wei)
- upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich
Felker)
- replace task_pt_regs(current) with current_pt_regs() (Denis
Efremov)
- fix corner-case race in USER_NOTIF (Jann Horn)
- make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)"
* tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
seccomp: Make duplicate listener detection non-racy
seccomp: Move config option SECCOMP to arch/Kconfig
selftests/clone3: Avoid OS-defined clone_args
selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit
selftests/seccomp: Allow syscall nr and ret value to be set separately
selftests/seccomp: Record syscall during ptrace entry
selftests/seccomp: powerpc: Fix seccomp return value testing
selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET
selftests/seccomp: Avoid redundant register flushes
selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG
selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG
selftests/seccomp: Remove syscall setting #ifdefs
selftests/seccomp: mips: Remove O32-specific macro
selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro
selftests/seccomp: arm: Define SYSCALL_NUM_SET macro
selftests/seccomp: mips: Define SYSCALL_NUM_SET macro
selftests/seccomp: Provide generic syscall setting macro
selftests/seccomp: Refactor arch register macros to avoid xtensa special case
selftests/seccomp: Use __NR_mknodat instead of __NR_mknod
selftests/seccomp: Use bitwise instead of arithmetic operator for flags
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
|
|
* pm-cpufreq: (30 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
arch_topology, arm, arm64: define arch_scale_freq_invariant()
arch_topology, cpufreq: constify arch_* cpumasks
cpufreq: report whether cpufreq supports Frequency Invariance (FI)
cpufreq: move invariance setter calls in cpufreq core
arch_topology: validate input frequencies to arch_set_freq_scale()
cpufreq: qcom: Don't add frequencies without an OPP
cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code
dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible
...
|
