| Age | Commit message (Collapse) | Author |
|---|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time and clocksource/clockevent related updates:
Core changes:
- Infrastructure to support per CPU "broadcast" devices for per CPU
clockevent devices which stop in deep idle states. This allows us
to utilize the more efficient architected timer on certain ARM SoCs
for normal operation instead of permanentely using the slow to
access SoC specific clockevent device.
- Print the name of the broadcast/wakeup device in /proc/timer_list
- Make the clocksource watchdog more robust against delays between
reading the current active clocksource and the watchdog
clocksource. Such delays can be caused by NMIs, SMIs and vCPU
preemption.
Handle this by reading the watchdog clocksource twice, i.e. before
and after reading the current active clocksource. In case that the
two watchdog reads shows an excessive time delta, the read sequence
is repeated up to 3 times.
- Improve the debug output and add a test module for the watchdog
mechanism.
- Reimplementation of the venerable time64_to_tm() function with a
faster and significantly smaller version. Straight from the source,
i.e. the author of the related research paper contributed this!
Driver changes:
- No new drivers, not even new device tree bindings!
- Fixes, improvements and cleanups and all over the place"
* tag 'timers-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
time/kunit: Add missing MODULE_LICENSE()
time: Improve performance of time64_to_tm()
clockevents: Use list_move() instead of list_del()/list_add()
clocksource: Print deviation in nanoseconds when a clocksource becomes unstable
clocksource: Provide kernel module to test clocksource watchdog
clocksource: Reduce clocksource-skew threshold
clocksource: Limit number of CPUs checked for clock synchronization
clocksource: Check per-CPU clock synchronization when marked unstable
clocksource: Retry clock read if long delays detected
clockevents: Add missing parameter documentation
clocksource/drivers/timer-ti-dm: Drop unnecessary restore
clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround
clocksource/drivers/arm_global_timer: Remove duplicated argument in arm_global_timer
clocksource/drivers/arm_global_timer: Make symbol 'gt_clk_rate_change_nb' static
arm: zynq: don't disable CONFIG_ARM_GLOBAL_TIMER due to CONFIG_CPU_FREQ anymore
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes
clocksource/drivers/ingenic: Rename unreasonable array names
clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
clocksource/drivers/mediatek: Ack and disable interrupts on suspend
clocksource/drivers/samsung_pwm: Constify source IO memory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Cleanup and simplification of common code to invoke the low level
interrupt flow handlers when this invocation requires irqdomain
resolution. Add the necessary core infrastructure.
- Provide a proper interface for modular PMU drivers to set the
interrupt affinity.
- Add a request flag which allows to exclude interrupts from spurious
interrupt detection. Useful especially for IPI handlers which
always return IRQ_HANDLED which turns the spurious interrupt
detection into a pointless waste of CPU cycles.
Driver changes:
- Bulk convert interrupt chip drivers to the new irqdomain low level
flow handler invocation mechanism.
- Add device tree bindings for the Renesas R-Car M3-W+ SoC
- Enable modular build of the Qualcomm PDC driver
- The usual small fixes and improvements"
* tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties
irqchip: gic-pm: Remove redundant error log of clock bulk
irqchip/sun4i: Remove unnecessary oom message
irqchip/irq-imx-gpcv2: Remove unnecessary oom message
irqchip/imgpdc: Remove unnecessary oom message
irqchip/gic-v3-its: Remove unnecessary oom message
irqchip/gic-v2m: Remove unnecessary oom message
irqchip/exynos-combiner: Remove unnecessary oom message
irqchip: Bulk conversion to generic_handle_domain_irq()
genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ()
genirq: Add generic_handle_domain_irq() helper
irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq()
irqdesc: Fix __handle_domain_irq() comment
genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co
irqdomain: Introduce irq_resolve_mapping()
irqdomain: Protect the linear revmap with RCU
irqdomain: Cache irq_data instead of a virq number in the revmap
irqdomain: Use struct_size() helper when allocating irqdomain
irqdomain: Make normal and nomap irqdomains exclusive
powerpc: Move the use of irq_domain_add_nomap() behind a config option
...
|
|
1. These tlb flush functions have been using vma instead mm long time
ago, but there is still some comments use mm as parameter.
2. the actual struct we use is vm_area_struct instead of vma_struct.
3. remove unused flush_kern_tlb_page.
Link: https://lkml.kernel.org/r/87k0oaq311.wl-chenli@uniontech.com
Signed-off-by: Chen Li <chenli@uniontech.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Algorithms:
- Fix rmmod crash with x86/curve25519
- Add ECDH NIST P384
- Generate assembly files at build-time with perl scripts on arm
- Switch to HMAC SHA512 DRBG as default DRBG
Drivers:
- Add sl3516 crypto engine
- Add ECDH NIST P384 support in hisilicon/hpre
- Add {ofb,cfb,ctr} over {aes,sm4} in hisilicon/sec
- Add {ccm,gcm} over {aes,sm4} in hisilicon/sec
- Enable omap hwrng driver for TI K3 family
- Add support for AEAD algorithms in qce"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits)
crypto: sl3516 - depends on HAS_IOMEM
crypto: hisilicon/qm - implement for querying hardware tasks status.
crypto: sl3516 - Fix build warning without CONFIG_PM
MAINTAINERS: update caam crypto driver maintainers list
crypto: nx - Fix numerous sparse byte-order warnings
crypto: nx - Fix RCU warning in nx842_OF_upd_status
crypto: api - Move crypto attr definitions out of crypto.h
crypto: nx - Fix memcpy() over-reading in nonce
crypto: hisilicon/sec - Fix spelling mistake "fallbcak" -> "fallback"
crypto: sa2ul - Remove unused auth_len variable
crypto: sl3516 - fix duplicated inclusion
crypto: hisilicon/zip - adds the max shaper type rate
crypto: hisilicon/hpre - adds the max shaper type rate
crypto: hisilicon/sec - adds the max shaper type rate
crypto: hisilicon/qm - supports to inquiry each function's QoS
crypto: hisilicon/qm - add pf ping single vf function
crypto: hisilicon/qm - merges the work initialization process into a single function
crypto: hisilicon/qm - add the "alg_qos" file node
crypto: hisilicon/qm - supports writing QoS int the host
crypto: api - remove CRYPTOA_U32 and related functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- V4L2 core control API was split into separate files
- New RC maps: tango and tc-90405
- Hantro driver got support for G2/HEVC decoder
- av7710 is moving to staging, together with some legacy APIs
- several cleanups related to compat_ioctl32 code
- Move the MPEG-2 stateless control type out of staging
- Address several issues with RPM get logic on media drivers
- Lots of cleanups, bug fixes and improvements.
* tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: s5p-mfc: Fix display delay control creation
media: mtk-vpu: on suspend, read/write regs only if vpu is running
media: video-mux: Skip dangling endpoints
media: Fix Media Controller API config checks
media: i2c: rdacm20: Re-work ov10635 reset
media: i2c: rdacm20: Check return values
media: i2c: rdacm20: Report camera module name
media: i2c: rdacm20: Enable noise immunity
media: i2c: rdacm20: Embed 'serializer' field
media: i2c: rdacm21: Power up OV10640 before OV490
media: i2c: rdacm21: Fix OV10640 powerup
media: i2c: rdacm21: Add delay after OV490 reset
media: i2c: max9271: Introduce wake_up() function
media: i2c: max9271: Check max9271_write() return
media: i2c: max9286: Rework comments in .bound()
media: i2c: max9286: Define high channel amplitude
media: i2c: max9286: Cache channel amplitude
media: i2c: max9286: Rename reverse_channel_mv
media: i2c: max9286: Adjust parameters indent
media: hantro: add support for Rockchip RK3036
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a reasonable amount here and the juicy details are all below.
It's worth noting that the MTE/KASAN changes strayed outside of our
usual directories due to core mm changes and some associated changes
to some other architectures; Andrew asked for us to carry these [1]
rather that take them via the -mm tree.
Summary:
- Optimise SVE switching for CPUs with 128-bit implementations.
- Fix output format from SVE selftest.
- Add support for versions v1.2 and 1.3 of the SMC calling
convention.
- Allow Pointer Authentication to be configured independently for
kernel and userspace.
- PMU driver cleanups for managing IRQ affinity and exposing event
attributes via sysfs.
- KASAN optimisations for both hardware tagging (MTE) and out-of-line
software tagging implementations.
- Relax frame record alignment requirements to facilitate 8-byte
alignment with KASAN and Clang.
- Cleanup of page-table definitions and removal of unused memory
types.
- Reduction of ARCH_DMA_MINALIGN back to 64 bytes.
- Refactoring of our instruction decoding routines and addition of
some missing encodings.
- Move entry code moved into C and hardened against harmful compiler
instrumentation.
- Update booting requirements for the FEAT_HCX feature, added to v8.7
of the architecture.
- Fix resume from idle when pNMI is being used.
- Additional CPU sanity checks for MTE and preparatory changes for
systems where not all of the CPUs support 32-bit EL0.
- Update our kernel string routines to the latest Cortex Strings
implementation.
- Big cleanup of our cache maintenance routines, which were
confusingly named and inconsistent in their implementations.
- Tweak linker flags so that GDB can understand vmlinux when using
RELR relocations.
- Boot path cleanups to enable early initialisation of per-cpu
operations needed by KCSAN.
- Non-critical fixes and miscellaneous cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (150 commits)
arm64: tlb: fix the TTL value of tlb_get_level
arm64: Restrict undef hook for cpufeature registers
arm64/mm: Rename ARM64_SWAPPER_USES_SECTION_MAPS
arm64: insn: avoid circular include dependency
arm64: smp: Bump debugging information print down to KERN_DEBUG
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
arm64: suspend: Use cpuidle context helpers in cpu_suspend()
PSCI: Use cpuidle context helpers in psci_cpu_suspend_enter()
arm64: Convert cpu_do_idle() to using cpuidle context helpers
arm64: Add cpuidle context save/restore helpers
arm64: head: fix code comments in set_cpu_boot_mode_flag
arm64: mm: drop unused __pa(__idmap_text_start)
arm64: mm: fix the count comments in compute_indices
arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan
arm64: mm: Pass original fault address to handle_mm_fault()
arm64/mm: Drop SECTION_[SHIFT|SIZE|MASK]
arm64/mm: Use CONT_PMD_SHIFT for ARM64_MEMSTART_SHIFT
arm64/mm: Drop SWAPPER_INIT_MAP_SIZE
arm64: Conditionally configure PTR_AUTH key of the kernel.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Platform PMU driver updates:
- x86 Intel uncore driver updates for Skylake (SNR) and Icelake (ICX) servers
- Fix RDPMC support
- Fix [extended-]PEBS-via-PT support
- Fix Sapphire Rapids event constraints
- Fix :ppp support on Sapphire Rapids
- Fix fixed counter sanity check on Alder Lake & X86_FEATURE_HYBRID_CPU
- Other heterogenous-PMU fixes
- Kprobes:
- Remove the unused and misguided kprobe::fault_handler callbacks.
- Warn about kprobes taking a page fault.
- Fix the 'nmissed' stat counter.
- Misc cleanups and fixes.
* tag 'perf-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix task context PMU for Hetero
perf/x86/intel: Fix instructions:ppp support in Sapphire Rapids
perf/x86/intel: Add more events requires FRONTEND MSR on Sapphire Rapids
perf/x86/intel: Fix fixed counter check warning for some Alder Lake
perf/x86/intel: Fix PEBS-via-PT reload base value for Extended PEBS
perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task
kprobes: Do not increment probe miss count in the fault handler
x86,kprobes: WARN if kprobes tries to handle a fault
kprobes: Remove kprobe::fault_handler
uprobes: Update uprobe_write_opcode() kernel-doc comment
perf/hw_breakpoint: Fix DocBook warnings in perf hw_breakpoint
perf/core: Fix DocBook warnings
perf/core: Make local function perf_pmu_snapshot_aux() static
perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX
perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR
perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedure
perf/x86/intel/uncore: Drop unnecessary NULL checks after container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Core locking & atomics:
- Convert all architectures to ARCH_ATOMIC: move every architecture
to ARCH_ATOMIC, then get rid of ARCH_ATOMIC and all the
transitory facilities and #ifdefs.
Much reduction in complexity from that series:
63 files changed, 756 insertions(+), 4094 deletions(-)
- Self-test enhancements
- Futexes:
- Add the new FUTEX_LOCK_PI2 ABI, which is a variant that doesn't
set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
[ The temptation to repurpose FUTEX_LOCK_PI's implicit setting of
FLAGS_CLOCKRT & invert the flag's meaning to avoid having to
introduce a new variant was resisted successfully. ]
- Enhance futex self-tests
- Lockdep:
- Fix dependency path printouts
- Optimize trace saving
- Broaden & fix wait-context checks
- Misc cleanups and fixes.
* tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
locking/lockdep: Correct the description error for check_redundant()
futex: Provide FUTEX_LOCK_PI2 to support clock selection
futex: Prepare futex_lock_pi() for runtime clock selection
lockdep/selftest: Remove wait-type RCU_CALLBACK tests
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
lockdep: Fix wait-type for empty stack
locking/selftests: Add a selftest for check_irq_usage()
lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
locking/lockdep: Remove the unnecessary trace saving
locking/lockdep: Fix the dep path printing for backwards BFS
selftests: futex: Add futex compare requeue test
selftests: futex: Add futex wait test
seqlock: Remove trailing semicolon in macros
locking/lockdep: Reduce LOCKDEP dependency list
locking/lockdep,doc: Improve readability of the block matrix
locking/atomics: atomic-instrumented: simplify ifdeffery
locking/atomic: delete !ARCH_ATOMIC remnants
locking/atomic: xtensa: move to ARCH_ATOMIC
locking/atomic: sparc: move to ARCH_ATOMIC
locking/atomic: sh: move to ARCH_ATOMIC
...
|
|
Pull libata updates from Jens Axboe:
"The big change in this round is that we're finally in a position where
we can sanely remove the old drivers/ide/ code, as libata covers
everything we need by now.
This is exciting for two reasons:
1) we delete a lot of legacy code that doesn't really meet the
standards we have today, and
2) it enables us to clean up various bits in the block layer that
exist only because of the old IDE code.
Outside of that, just a few minor fixes here, fixups for warnings,
etc"
* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
ata: rb532_cf: remove redundant codes
ide: remove the legacy ide driver
m68k: use libata instead of the legacy ide driver
ARM: disable CONFIG_IDE in pxa_defconfig
ARM: disable CONFIG_IDE in footbridge_defconfig
alpha: use libata instead of the legacy ide driver
pata_cypress: add a module option to disable BM-DMA
ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
ata: include: libata: Move fields commonly over-written to separate MACRO
ahci: Add support for Dell S140 and later controllers
ata: ahci_sunxi: Disable DIPM
...
|
|
PMU driver cleanups for managing IRQ affinity and exposing event
attributes via sysfs.
* for-next/perf: (36 commits)
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
arm64: perf: Simplify EVENT ATTR macro in perf_event.c
drivers/perf: Simplify EVENT ATTR macro in fsl_imx8_ddr_perf.c
drivers/perf: Simplify EVENT ATTR macro in xgene_pmu.c
drivers/perf: Simplify EVENT ATTR macro in qcom_l3_pmu.c
drivers/perf: Simplify EVENT ATTR macro in qcom_l2_pmu.c
drivers/perf: Simplify EVENT ATTR macro in SMMU PMU driver
perf: Add EVENT_ATTR_ID to simplify event attributes
perf/smmuv3: Don't trample existing events with global filter
perf/hisi: Constify static attribute_group structs
perf: qcom: Remove redundant dev_err call in qcom_l3_cache_pmu_probe()
drivers/perf: hisi: Fix data source control
arm64: perf: Add more support on caps under sysfs
perf: qcom_l2_pmu: move to use request_irq by IRQF_NO_AUTOEN flag
arm_pmu: move to use request_irq by IRQF_NO_AUTOEN flag
perf: arm_spe: use DEVICE_ATTR_RO macro
perf: xgene_pmu: use DEVICE_ATTR_RO macro
perf: qcom: use DEVICE_ATTR_RO macro
perf: arm_pmu: use DEVICE_ATTR_RO macro
...
|
|
Pull ARM fix from Russell King:
- fix gcc 10 compiler regression with cpu_init()
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9081/1: fix gcc-10 thumb2-kernel regression
|
|
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.222401495@infradead.org
|
|
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a37: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d86a: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As we need to start doing some additional work on all idle
paths, let's introduce a set of macros that will perform
the work related to the GICv3 pseudo-NMI idle entry exit.
Stubs are introduced to 32bit ARM for compatibility.
As these helpers are currently unused, there is no functional
change.
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210615111227.2454465-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now ARM global timer driver could work even if it's source clock rate
changes, so we don't need to disable that driver when cpu frequency scaling
is in use.
This cause Zynq arch to get support for timer delay and get_cycles().
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406130045.15491-3-andrea.merello@gmail.com
|
|
pxa_defconfig already enables libata including the pata_pcmcia driver, so
drop the legacy ide driver and idecs host driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
footbridge_defconfig enables CONFIG_IDE but no actual host controller
driver, so just drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Despite the name, handle_domain_irq() deals with non-irqdomain
handling for the sake of a handful of legacy ARM platforms.
Move such handling into ARM's handle_IRQ(), allowing for better
code generation for everyone else. This allows us get rid of
some complexity, and to rearrange the guards on the various helpers
in a more logical way.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull orphan section fixes from Kees Cook:
"These two corner case fixes have been in -next for about a week:
- Avoid orphan section in ARM cpuidle (Arnd Bergmann)
- Avoid orphan section with !SMP (Nathan Chancellor)"
* tag 'orphans-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
vmlinux.lds.h: Avoid orphan section with !SMP
ARM: cpuidle: Avoid orphan section warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
PM and build warning fixes for omaps
While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:
- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded
Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.
These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.
* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.13:
- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.
* tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
Link: https://lore.kernel.org/r/20210527011758.GD8194@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Kprobes has a counter 'nmissed', that is used to count the number of
times a probe handler was not called. This generally happens when we hit
a kprobe while handling another kprobe.
However, if one of the probe handlers causes a fault, we are currently
incrementing 'nmissed'. The comment in fault handler indicates that this
can be used to account faults taken by the probe handlers. But, this has
never been the intention as is evident from the comment above 'nmissed'
in 'struct kprobe':
/*count the number of times this probe was temporarily disarmed */
unsigned long nmissed;
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210601120150.672652-1-naveen.n.rao@linux.vnet.ibm.com
|
|
The ixp4xx_crypto driver traditionally registers a bare platform
device without attaching it to a driver, and detects the hardware
at module init time by reading an SoC specific hardware register.
Change this to the conventional method of registering the platform
device from the platform code itself when the device is present,
turning the module_init/module_exit functions into probe/release
driver callbacks.
This enables compile-testing as well as potentially having ixp4xx
coexist with other ARMv5 platforms in the same kernel in the future.
Cc: Corentin Labbe <clabbe@baylibre.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When building the kernel wtih gcc-10 or higher using the
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y flag, the compiler picks a slightly
different set of registers for the inline assembly in cpu_init() that
subsequently results in a corrupt kernel stack as well as remaining in
FIQ mode. If a banked register is used for the last argument, the wrong
version of that register gets loaded into CPSR_c. When building in Arm
mode, the arguments are passed as immediate values and the bug cannot
happen.
This got introduced when Daniel reworked the FIQ handling and was
technically always broken, but happened to work with both clang and gcc
before gcc-10 as long as they picked one of the lower registers.
This is probably an indication that still very few people build the
kernel in Thumb2 mode.
Marek pointed out the problem on IRC, Arnd narrowed it down to this
inline assembly and Russell pinpointed the exact bug.
Change the constraints to force the final mode switch to use a non-banked
register for the argument to ensure that the correct constant gets loaded.
Another alternative would be to always use registers for the constant
arguments to avoid the #ifdef that has now become more complex.
Cc: <stable@vger.kernel.org> # v3.18+
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: c0e7f7ee717e ("ARM: 8150/3: fiq: Replace default FIQ handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Since commit 83109d5d5fba ("x86/build: Warn on orphan section placement"),
we get a warning for objects in orphan sections. The cpuidle implementation
for OMAP causes this when CONFIG_CPU_IDLE is disabled:
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
Change the definition of CPUIDLE_METHOD_OF_DECLARE() to silently
drop the table and all code referenced from it when CONFIG_CPU_IDLE
is disabled.
Fixes: 06ee7a950b6a ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201230155506.1085689-1-arnd@kernel.org
|
|
Linux 5.13-rc4
* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...
|
|
The reason for kprobe::fault_handler(), as given by their comment:
* We come here because instructions in the pre/post
* handler caused the page_fault, this could happen
* if handler tries to access user space by
* copy_from_user(), get_user() etc. Let the
* user-specified handler try to fix it first.
Is just plain bad. Those other handlers are ran from non-preemptible
context and had better use _nofault() functions. Also, there is no
upstream usage of this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210525073213.561116662@infradead.org
|
|
Commit 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
changes the input "value" type from 32-bit to 64-bit, which introduces the
following problem: ARMv7 PMU counters is 32-bit width, in big-endian mode,
write counter uses high 32-bit, which writes an incorrect value.
Before:
Performance counter stats for 'ls':
2.22 msec task-clock # 0.675 CPUs utilized
0 context-switches # 0.000 K/sec
0 cpu-migrations # 0.000 K/sec
49 page-faults # 0.022 M/sec
2150476593 cycles # 966.663 GHz
2148588788 instructions # 1.00 insn per cycle
2147745484 branches # 965435.074 M/sec
2147508540 branch-misses # 99.99% of all branches
None of the above hw event counters are correct.
Solution:
"value" forcibly converted to 32-bit type before being written to PMU register.
After:
Performance counter stats for 'ls':
2.09 msec task-clock # 0.681 CPUs utilized
0 context-switches # 0.000 K/sec
0 cpu-migrations # 0.000 K/sec
46 page-faults # 0.022 M/sec
2807301 cycles # 1.344 GHz
1060159 instructions # 0.38 insn per cycle
250496 branches # 119.914 M/sec
23192 branch-misses # 9.26% of all branches
Fixes: 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210430012659.232110-1-yangjihong1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that all architectures implement ARCH_ATOMIC, we can make it
mandatory, removing the Kconfig symbol and logic for !ARCH_ATOMIC.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210525140232.53872-33-mark.rutland@arm.com
|
|
We'd like all architectures to convert to ARCH_ATOMIC, as once all
architectures are converted it will be possible to make significant
cleanups to the atomics headers, and this will make it much easier to
generically enable atomic functionality (e.g. debug logic in the
instrumented wrappers).
As a step towards that, this patch migrates alpha to ARCH_ATOMIC. The
arch code provides arch_{atomic,atomic64,xchg,cmpxchg}*(), and common
code wraps these with optional instrumentation to provide the regular
functions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210525140232.53872-16-mark.rutland@arm.com
|
|
The asm-generic implementations of cmpxchg_local() and cmpxchg64_local()
use a `_generic` suffix to distinguish themselves from arch code or
wrappers used elsewhere.
Subsequent patches will add ARCH_ATOMIC support to these
implementations, and will distinguish more functions with a `generic`
portion. To align with how ARCH_ATOMIC uses an `arch_` prefix, it would
be helpful to use a `generic_` prefix rather than a `_generic` suffix.
In preparation for this, this patch renames the existing functions to
make `generic` a prefix rather than a suffix. There should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210525140232.53872-12-mark.rutland@arm.com
|
|
The ams_delta_camera_power() function is unused as reports
Clang compilation with omap1_defconfig on linux-next:
arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: unused function 'ams_delta_camera_power' [-Wunused-function]
static int ams_delta_camera_power(struct device *dev, int power)
^
1 warning generated.
The soc_camera support was dropped without removing
ams_delta_camera_power() function, making it unused.
Fixes: ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1326
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
|
|
According to the DT bindings, #gpio-cells must be two.
Fixes: 63e71fedc07c4ece ("ARM: dts: Add support for emtrion emCON-MX6 series")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the
correct name of the property is 'fsl,tuning-step'.
Fix it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fixes: f13f571ac8a1 ("ARM: dts: imx7d-pico: Extend peripherals support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the
correct name of the property is 'fsl,tuning-step'.
Fix it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fixes: ae7b3384b61b ("ARM: dts: Add support for 96Boards Meerkat96 board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since commit 879c0e5e0ac7 ("ARM: imx: Remove i.MX27 board files")
the following W=1 build warning is seen:
arch/arm/mach-imx/pm-imx27.c:40:13: warning: no previous prototype for 'imx27_pm_init' [-Wmissing-prototypes]
Fix it by including the "common.h" header file, which
contains the prototype for imx27_pm_init().
Fixes: 879c0e5e0ac7 ("ARM: imx: Remove i.MX27 board files")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Only a small number of fixes so far, including some that I had applied
during the merge window, so this is based on the original merge of the
other branches.
- The largest change is a fix for a reference counting bug in the AMD
TEE driver.
- Neil Armstrong now co-maintains Amlogic SoC support
- Two build warning fixes for renesas device tree files
- A sign expansion bug for optee
- A DT binding fix for a mismerge"
* tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: npcm: wpcm450: select interrupt controller driver
MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer
tee: amdtee: unload TA only when its refcount becomes 0
dt-bindings: nvmem: mediatek: remove duplicate mt8192 line
firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle
firmware: arm_scpi: Prevent the ternary sign expansion bug
arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Fix CSI40 ports
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota fixes from Jan Kara:
"The most important part in the pull is disablement of the new syscall
quotactl_path() which was added in rc1.
The reason is some people at LWN discussion pointed out dirfd would be
useful for this path based syscall and Christian Brauner agreed.
Without dirfd it may be indeed problematic for containers. So let's
just disable the syscall for now when it doesn't have users yet so
that we have more time to mull over how to best specify the filesystem
we want to work on"
* tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Disable quotactl_path syscall
quota: Use 'hlist_for_each_entry' to simplify code
|
|
Add the SAMA5D4 VDEC module which comprises Hantro G1 video decoder
core.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The interrupt controller driver is necessary in order to have a
functioning Linux system on WPCM450. Select it in mach-npcm/Kconfig.
Fixes: ece3fe93e8f4 ("ARM: npcm: Introduce Nuvoton WPCM450 SoC")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210513165627.1767093-1-j.neuschaefer@gmx.net
Link: https://lore.kernel.org/r/20210518071514.604492-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
GCC reports the following warning with W=1:
arch/arm/mach-omap2/board-n8x0.c:325:19: warning:
variable 'index' set but not used [-Wunused-but-set-variable]
325 | int bit, *openp, index;
| ^~~~~
Fix this by moving CONFIG_MMC_OMAP to cover the rest codes
in the n8x0_mmc_callback().
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The gpiod table was added without any usage making it unused
as reported by Clang compilation from omap1_defconfig on linux-next:
arch/arm/mach-omap1/board-h2.c:347:34: warning: unused variable
'isp1301_gpiod_table' [-Wunused-variable]
static struct gpiod_lookup_table isp1301_gpiod_table = {
^
1 warning generated.
The patch adds the missing gpiod_add_lookup_table() function.
Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com>
Fixes: f3ef38160e3d ("usb: isp1301-omap: Convert to use GPIO descriptors")
Link: https://github.com/ClangBuiltLinux/linux/issues/1325
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The current control flow of IRQ number assignment to `irq` variable
allows a request of IRQ of unspecified value,
generating a warning under Clang compilation with omap1_defconfig on
linux-next:
arch/arm/mach-omap1/pm.c:656:11: warning: variable 'irq' is used
uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
else if (cpu_is_omap16xx())
^~~~~~~~~~~~~~~~~
./arch/arm/mach-omap1/include/mach/soc.h:123:30: note: expanded from macro
'cpu_is_omap16xx'
^~~~~~~~~~~~~
arch/arm/mach-omap1/pm.c:658:18: note: uninitialized use occurs here
if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
^~~
arch/arm/mach-omap1/pm.c:656:7: note: remove the 'if' if its condition is
always true
else if (cpu_is_omap16xx())
^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-omap1/pm.c:611:9: note: initialize the variable 'irq' to
silence this warning
int irq;
^
= 0
1 warning generated.
The patch provides a default value to the `irq` variable
along with a validity check.
Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1324
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix PXA Mainstone CPLD irq allocation in legacy mode
- Restrict the Apple AIC controller to the Apple platform
- Remove a few supperfluous messages on devm_ioremap_resource() failure
Link: https://lore.kernel.org/r/20210516122217.13234-1-maz@kernel.org
|
|
In commit fa8b90070a80 ("quota: wire up quotactl_path") we have wired up
new quotactl_path syscall. However some people in LWN discussion have
objected that the path based syscall is missing dirfd and flags argument
which is mostly standard for contemporary path based syscalls. Indeed
they have a point and after a discussion with Christian Brauner and
Sascha Hauer I've decided to disable the syscall for now and update its
API. Since there is no userspace currently using that syscall and it
hasn't been released in any major release, we should be fine.
CC: Christian Brauner <christian.brauner@ubuntu.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/lkml/20210512153621.n5u43jsytbik4yze@wittgenstein
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with
-ENOMEM if the swiotlb has already been initialized.
Add an explicit check io_tlb_default_mem != NULL at the beginning of
xen_swiotlb_init. If the swiotlb is already initialized print a warning
and return -EEXIST.
On x86, the error propagates.
On ARM, we don't actually need a special swiotlb buffer (yet), any
buffer would do. So ignore the error and continue.
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210512201823.1963-3-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
