| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
Hook up the generic vDSO implementation to the LoongArch vDSO data page
by providing the required __arch_chacha20_blocks_nostack,
__arch_get_k_vdso_rng_data, and getrandom_syscall implementations. Also
wire up the selftests.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Implement function kvm_para_has_feature() to detect supported paravirt
features. It can be used by device driver to detect and enable paravirt
features, such as the EIOINTC irqchip driver is able to detect feature
KVM_FEATURE_VIRT_EXTIOI and do some optimization.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the
same with kvm supported features if VMM does not set it.
Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set
from user space. This feature indicates that the virt EIOINTC can route
interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and a CNTR register. We can set which PMU CSRs are used by the
guest by writing to the GCFG register [24:26] bits.
On KVM side:
- Save the host PMU CSRs into structure kvm_context.
- If the host supports the PMU feature.
- When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs.
- When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Every vcpu has separate LBT registers. And there are four scr registers,
one flags and ftop register for LBT extension. When VM migrates, VMM
needs to get LBT registers for every vcpu.
Here macro KVM_REG_LOONGARCH_LBT is added for new vcpu lbt register type,
the following macro is added to get/put LBT registers.
KVM_REG_LOONGARCH_LBT_SCR0
KVM_REG_LOONGARCH_LBT_SCR1
KVM_REG_LOONGARCH_LBT_SCR2
KVM_REG_LOONGARCH_LBT_SCR3
KVM_REG_LOONGARCH_LBT_EFLAGS
KVM_REG_LOONGARCH_LBT_FTOP
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson Binary Translation (LBT) is used to accelerate binary translation,
which contains 4 scratch registers (scr0 to scr3), x86/ARM eflags (eflags)
and x87 fpu stack pointer (ftop).
Like FPU extension, here a lazy enabling method is used for LBT. the LBT
context is saved/restored on the vcpu context switch path.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX)
and Loongson Binary Translation (LBT) features are defined in register
CPUCFG2. Two kinds of LSX/LASX/LBT feature detection are added here, one
is VCPU feature, and the other is VM feature. VCPU feature dection can
only work with VCPU thread itself, and requires VCPU thread is created
already. So LSX/LASX/LBT feature detection for VM is added also, it can
be done even if VM is not created, and also can be done by any threads
besides VCPU threads.
Here ioctl command KVM_HAS_DEVICE_ATTR is added for VM, and macro
KVM_LOONGARCH_VM_FEAT_CTRL is added to check supported feature. And
five sub-features relative with LSX/LASX/LBT are added as following:
KVM_LOONGARCH_VM_FEAT_LSX
KVM_LOONGARCH_VM_FEAT_LASX
KVM_LOONGARCH_VM_FEAT_X86BT
KVM_LOONGARCH_VM_FEAT_ARMBT
KVM_LOONGARCH_VM_FEAT_MIPSBT
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Similar with x86, when VM is detected, revert to a simple test-and-set
lock to avoid the horrors of queue preemption.
Tested on 3C5000 Dual-way machine with 32 cores and 2 numa nodes,
test case is kcbench on kernel mainline 6.10, the detailed command is
"kcbench --src /root/src/linux"
Performance on host machine
kernel compile time performance impact
Original 150.29 seconds
With patch 150.19 seconds almost no impact
Performance on virtual machine:
1. 1 VM with 32 vCPUs and 2 numa node, numa node pinned
kernel compile time performance impact
Original 170.87 seconds
With patch 171.73 seconds almost no impact
2. 2 VMs, each VM with 32 vCPUs and 2 numa node, numa node pinned
kernel compile time performance impact
Original 2362.04 seconds
With patch 354.73 seconds +565%
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If ParaVirt steal time feature is enabled, there is a percpu gpa address
passed from guest vCPU and host modifies guest memory space with this gpa
address. When vCPU is reset normally, it will notify host and invalidate
gpa address.
However if VM is crashed and VMM reboots VM forcely, the vCPU reboot
notification callback will not be called in VM. Host needs invalidate
the gpa address, else host will modify guest memory during VM reboots.
Here it is invalidated from the vCPU KVM_REG_LOONGARCH_VCPU_RESET ioctl
interface.
Also funciton kvm_reset_timer() is removed at vCPU reset stage, since SW
emulated timer is only used in vCPU block state. When a vCPU is removed
from the block waiting queue, kvm_restore_timer() is called and SW timer
is cancelled. And the timer register is also cleared at VMM when a vCPU
is reset.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There exist some warnings when building kernel if CONFIG_CPU_HAS_LBT is
set but CONFIG_CPU_HAS_LSX and CONFIG_CPU_HAS_LASX are not set. In this
case, there are no definitions of _restore_lsx & _restore_lasx and there
are also no definitions of kvm_restore_lsx & kvm_restore_lasx in fpu.S
and switch.S respectively, just add some ifdefs to fix these warnings.
AS arch/loongarch/kernel/fpu.o
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
AS [M] arch/loongarch/kvm/switch.o
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
MODPOST Module.symvers
ERROR: modpost: "kvm_restore_lsx" [arch/loongarch/kvm/kvm.ko] undefined!
ERROR: modpost: "kvm_restore_lasx" [arch/loongarch/kvm/kvm.ko] undefined!
Cc: stable@vger.kernel.org # 6.9+
Fixes: cb8a2ef0848c ("LoongArch: Add ORC stack unwinder support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408120955.qls5oNQY-lkp@intel.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed
it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only
legacy interrupts have been allocated.
Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h
and the core will automatically set the flag for all interrupts.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
|
|
dma-direct.h is introduced in commit d4b6f1562a3c3284 ("LoongArch: Add
Non-Uniform Memory Access (NUMA) support"). In commit c78c43fe7d42524c
("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"),
ARCH_HAS_PHYS_TO_DMA was deselected and the coresponding phys_to_dma()/
dma_to_phys() functions were removed. However, the unused dma-direct.h
was left behind, which is removed by this patch.
Cc: <stable@vger.kernel.org>
Fixes: c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Introduce the advanced extended interrupt controllers (AVECINTC). This
feature will allow each core to have 256 independent interrupt vectors
and MSI interrupts can be independently routed to any vector on any CPU.
The whole topology of irqchips in LoongArch machines looks like this if
AVECINTC is supported:
+-----+ +-----------------------+ +-------+
| IPI | --> | CPUINTC | <-- | Timer |
+-----+ +-----------------------+ +-------+
^ ^ ^
| | |
+---------+ +----------+ +---------+ +-------+
| EIOINTC | | AVECINTC | | LIOINTC | <-- | UARTs |
+---------+ +----------+ +---------+ +-------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+---------+ +---------+ +---------+
| Devices | | PCH-LPC | | Devices |
+---------+ +---------+ +---------+
^
|
+---------+
| Devices |
+---------+
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823104337.25577-2-zhangtianyang@loongson.cn
|
|
Add architectural preparation for AVEC irqchip, including:
1. CPUCFG feature bits definition for AVEC;
2. Detection of AVEC irqchip in cpu_probe();
3. New IPI type definition (IPI_CLEAR_VECTOR) for AVEC;
4. Provide arch_probe_nr_irqs() for large NR_IRQS;
5. Other related changes about the number of interrupts.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823103936.25092-2-zhangtianyang@loongson.cn
|
|
Some irqchip functions are only for internal use by irqchip drivers, so
move their prototypes from asm/irq.h to drivers/irqchip/irq-loongson.h.
All related driver files include the new irq-loongson.h.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823103936.25092-1-zhangtianyang@loongson.cn
|
|
The kvm_hypercall() set for LoongArch is limited to a1-a5. So the
mention of a6 in the comment is undefined that needs to be rectified.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Dandan Zhang <zhangdandan@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
1. "KVM_PRIVATE_MEM_SLOTS" is renamed as "KVM_INTERNAL_MEM_SLOTS".
2. "KVM_INTERNAL_MEM_SLOTS" defaults to zero, so it is not necessary to
define it in LoongArch's asm/kvm_host.h.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bdd1c37a315bc50ab14066c4852bc8dcf070451e
Link: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b075450868dbc0950f0942617f222eeb989cad10
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As very well explained in commit 20a004e7b017cce282 ("arm64: mm: Use
READ_ONCE/WRITE_ONCE when accessing page tables"), an architecture whose
page table walker can modify the PTE in parallel must use READ_ONCE()/
WRITE_ONCE() macro to avoid any compiler transformation.
So apply that to LoongArch which is such an architecture, in order to
avoid potential problems.
Similar to commit edf955647269422e ("riscv: Use accessors to page table
entries instead of direct dereference").
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
efi_shutdown_init() can register a general sys_off handler named
efi_power_off(). Enable this by providing efi_poweroff_required(),
like arm and x86. Since EFI poweroff is also supported on LoongArch,
and the enablement makes the poweroff function usable for hardwares
which lack ACPI S5.
We prefer ACPI poweroff rather than EFI poweroff (like x86), so we only
require EFI poweroff if acpi_gbl_reduced_hardware or acpi_no_s5 is true.
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The __NR_newfstat and __NR_newfstatat macros accidentally got renamed
in the conversion to the syscall.tbl format, dropping the 'new' portion
of the name.
In an unrelated change, the two syscalls are no longer architecture
specific but are once more defined on all 64-bit architectures, so the
'newstat' ABI keyword can be dropped from the table as a simplification.
Fixes: Fixes: 4fe53bf2ba0a ("syscalls: add generic scripts/syscall.tbl")
Closes: https://lore.kernel.org/lkml/838053e0-b186-4e9f-9668-9a3384a71f23@app.fastmail.com/T/#t
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Define __ARCH_WANT_NEW_STAT in unistd.h
- Always enumerate MADT and setup logical-physical CPU mapping
- Add irq_work support via self IPIs
- Add RANDOMIZE_KSTACK_OFFSET support
- Add ARCH_HAS_PTE_DEVMAP support
- Add ARCH_HAS_DEBUG_VM_PGTABLE support
- Add writecombine support for DMW-based ioremap()
- Add architectural preparation for CPUFreq
- Add ACPI standard hardware register based S3 support
- Add support for relocating the kernel with RELR relocation
- Some bug fixes and other small changes
* tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Make the users of larch_insn_gen_break() constant
LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint
LoongArch: Use rustc option -Zdirect-access-external-data
LoongArch: Add support for relocating the kernel with RELR relocation
LoongArch: Remove a redundant checking in relocator
LoongArch: Use correct API to map cmdline in relocate_kernel()
LoongArch: Automatically disable KASLR for hibernation
LoongArch: Add ACPI standard hardware register based S3 support
LoongArch: Add architectural preparation for CPUFreq
LoongArch: Add writecombine support for DMW-based ioremap()
LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
LoongArch: Add ARCH_HAS_PTE_DEVMAP support
LoongArch: Add RANDOMIZE_KSTACK_OFFSET support
LoongArch: Add irq_work support via self IPIs
LoongArch: Always enumerate MADT and setup logical-physical CPU mapping
LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h
|
|
Haibo Xu <haibo1.xu@intel.com> says:
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].
Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.
Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0
2) Build latest EDK-II
https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md
3) Build Linux with the following configs enabled
CONFIG_RISCV_SBI_V01=y
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_NONPORTABLE=y
CONFIG_HVC_RISCV_SBI=y
CONFIG_NUMA=y
CONFIG_ACPI_NUMA=y
4) Build buildroot rootfs.cpio
5) Launch the Qemu machine
qemu-system-riscv64 -nographic \
-machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \
-blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
-blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-numa node,memdev=m0,cpus=0-1,nodeid=0 \
-numa node,memdev=m1,cpus=2-3,nodeid=1 \
-numa dist,src=0,dst=1,val=30 \
-kernel linux/arch/riscv/boot/Image \
-initrd buildroot/output/images/rootfs.cpio \
-append "root=/dev/ram ro console=hvc0 earlycon=sbi"
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff]
[ 0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff]
...
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1
* b4-shazam-merge:
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
ACPI: RISCV: Add NUMA support based on SRAT and SLIT
Link: https://lore.kernel.org/r/cover.1718268003.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
x86/arm64/loongarch would select ACPI_NUMA by default and riscv
would do the same thing, so change it to a hidden option and the
select statements except for the X86_64_ACPI_NUMA can also go away.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/f1f96377b8ecd6e3183f28abf5c9ac21cb9855ea.1718268003.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
|
LoongArch defines UPROBE_SWBP_INSN as a function call and this breaks
arch_uprobe_trampoline() which uses it to initialize a static variable.
Add the new "__builtin_constant_p" helper, __emit_break(), and redefine
the current users of larch_insn_gen_break() to use it.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240614174822.GA1185149@thelio-3990X/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, there are some places to set CSR.PRMD.PWE, the first one is
in hw_breakpoint_thread_switch() to enable user space singlestep via
checking TIF_SINGLESTEP, the second one is in hw_breakpoint_control() to
enable user space watchpoint. For the latter case, it should also check
TIF_LOAD_WATCH to make the logic correct and clear.
Fixes: c8e57ab0995c ("LoongArch: Trigger user-space watchpoints correctly")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
-Zdirect-access-external-data is a new Rust compiler option added in
Rust 1.78, which we use to optimize the access of external data in the
Linux kernel's Rust code. This patch modifies the Rust code in vmlinux
to directly access externa data, using PC-REL instead of GOT. However,
Rust code whithin modules is constrained by the PC-REL addressing range
and is explicitly set to use an indirect method.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
RELR as a relocation packing format for relative relocations for
reducing the size of relative relocation records. In a position
independent executable there are often many relative relocation
records, and our vmlinux is a PIE.
The LLD linker (since 17.0.0) and the BFD linker (since 2.43) supports
packing the relocations in the RELR format for LoongArch, with the flag
-z pack-relative-relocs.
Commits 5cf896fb6be3eff ("arm64: Add support for relocating the kernel
with RELR relocations") and ccb2d173b983984bfa ("Makefile: use -z
pack-relative-relocs") have already added the framework to use RELR.
We just need to wire it up and process the RELR relocation records in
relocate_relative() in addition to the RELA relocation records.
A ".p2align 3" directive is added to la_abs macro or the BFD linker
cannot pack the relocation records against the .la_abs section (the
". = ALIGN(8);" directive in vmlinux.lds.S is too late in the linking
process).
With defconfig and CONFIG_RELR vmlinux.efi is 2.1 MiB (6%) smaller, and
vmlinuz.efi (using gzip compression) is 384 KiB (2.8%) smaller.
Link: https://groups.google.com/d/topic/generic-abi/bX460iggiKg
Link: https://reviews.llvm.org/D138135#4531389
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d89ecf33ab6d
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With our linker script "relocated_addr >= VMLINUX_LOAD_ADDRESS" should
be always true.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
fw_arg1 is in memory space rather than I/O space, so we should use
early_memremap_ro() instead of early_ioremap() to map the cmdline.
Moreover, we should unmap it after using.
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Hibernation assumes the memory layout after resume be the same as that
before sleep, so it expects the kernel is loaded at the same position.
To achieve this goal we automatically disable KASLR if user explicitly
requests hibernation via the "resume=" command line. Since "nohibernate"
and "noresume" have higher priorities than "resume=", we only disable
KASLR if there is no "nohibernate" and "noresume".
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Most LoongArch 64 machines are using custom "SADR" ACPI extension to
perform ACPI S3 sleep. However the standard ACPI way to perform sleep
is to write a value to ACPI PM1/SLEEP_CTL register, and this is never
supported properly in kernel.
Add standard S3 sleep by providing a default DoSuspend function which
calls ACPI's acpi_enter_sleep_state() routine when SADR is not provided
by the firmware.
Also fix suspend assembly code so that ra is set properly before go
into sleep routine. (Previously linked address of jirl was set to a0,
some firmware do require return address in a0 but it's already set with
la.pcrel before).
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add architectural preparation for CPUFreq driver, including: Kconfig,
register definition and platform device registration.
Some of LoongArch processors support DVFS, their IOCSR.FEATURES has
IOCSRF_FREQSCALE set. And they has a micro-core in the package called
SMC (System Management Controller) to scale frequency, voltage, etc.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.
DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.
BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add ARCH_HAS_DEBUG_VM_PGTABLE selection in Kconfig, in order to make
corresponding vm debug features usable on LoongArch. Also update the
corresponding arch-support.txt document.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs. Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support of kernel stack offset randomization while handling syscall,
the offset is defaultly limited by KSTACK_OFFSET_MAX().
In order to avoid triggering stack canaries (due to __builtin_alloca())
and slowing down the entry path, use __no_stack_protector attribute to
disable stack protector for do_syscall() at function level.
With this patch, the REPORT_STACK test show that:
`loongarch64 bits of stack entropy: 7`
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add irq_work support for LoongArch via self IPIs. This make it possible
to run works in hardware interrupt context, which is a prerequisite for
NOHZ_FULL.
Implement:
- arch_irq_work_raise()
- arch_irq_work_has_interrupt()
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some drivers want to use cpu_logical_map(), early_cpu_to_node() and some
other CPU mapping APIs, even if we use "nr_cpus=1" to hard limit the CPU
number. This is strongly required for the multi-bridges machines.
Currently, we stop parsing the MADT if the nr_cpus limit is reached, but
to achieve the above goal we should always enumerate the MADT table and
setup logical-physical CPU mapping whether there is a nr_cpus limit.
Rework the MADT enumeration:
1. Define a flag "cpu_enumerated" to distinguish the first enumeration
(cpu_enumerated=0) and the physical hotplug case (cpu_enumerated=1)
for set_processor_mask().
2. If cpu_enumerated=0, stop parsing only when NR_CPUS limit is reached,
so we can setup logical-physical CPU mapping; if cpu_enumerated=1,
stop parsing when nr_cpu_ids limit is reached, so we can avoid some
runtime bugs. Once logical-physical CPU mapping is setup, we will let
cpu_enumerated=1.
3. Use find_first_zero_bit() instead of cpumask_next_zero() to find the
next zero bit (free logical CPU id) in the cpu_present_mask, because
cpumask_next_zero() will stop at nr_cpu_ids.
4. Only touch cpu_possible_mask if cpu_enumerated=0, this is in order to
avoid some potential crashes, because cpu_possible_mask is marked as
__ro_after_init.
5. In prefill_possible_map(), clear cpu_present_mask bits greater than
nr_cpu_ids, in order to avoid a CPU be "present" but not "possible".
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Chromium sandbox apparently wants to deny statx [1] so it could properly
inspect arguments after the sandboxed process later falls back to fstat.
Because there's currently not a "fd-only" version of statx, so that the
sandbox has no way to ensure the path argument is empty without being
able to peek into the sandboxed process's memory. For architectures able
to do newfstatat though, glibc falls back to newfstatat after getting
-ENOSYS for statx, then the respective SIGSYS handler [2] takes care of
inspecting the path argument, transforming allowed newfstatat's into
fstat instead which is allowed and has the same type of return value.
But, as LoongArch is the first architecture to not have fstat nor
newfstatat, the LoongArch glibc does not attempt falling back at all
when it gets -ENOSYS for statx -- and you see the problem there!
Actually, back when the LoongArch port was under review, people were
aware of the same problem with sandboxing clone3 [3], so clone was
eventually kept. Unfortunately it seemed at that time no one had noticed
statx, so besides restoring fstat/newfstatat to LoongArch uapi (and
postponing the problem further), it seems inevitable that we would need
to tackle seccomp deep argument inspection.
However, this is obviously a decision that shouldn't be taken lightly,
so we just restore fstat/newfstatat by defining __ARCH_WANT_NEW_STAT
in unistd.h. This is the simplest solution for now, and so we hope the
community will tackle the long-standing problem of seccomp deep argument
inspection in the future [4][5].
Also add "newstat" to syscall_abis_64 in Makefile.syscalls due to
upstream asm-generic changes.
More infomation please reading this thread [6].
[1] https://chromium-review.googlesource.com/c/chromium/src/+/2823150
[2] https://chromium.googlesource.com/chromium/src/sandbox/+/c085b51940bd/linux/seccomp-bpf-helpers/sigsys_handlers.cc#355
[3] https://lore.kernel.org/linux-arch/20220511211231.GG7074@brightrain.aerifal.cx/
[4] https://lwn.net/Articles/799557/
[5] https://lpc.events/event/4/contributions/560/attachments/397/640/deep-arg-inspection.pdf
[6] https://lore.kernel.org/loongarch/20240226-granit-seilschaft-eccc2433014d@brauner/T/#t
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
"Rewrite of function graph tracer to allow multiple users
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing
function graph tracer to have more than one user has been asked for
since 2009, but it required a rewrite to the logic to pull it off so
it never happened. Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function
graph tracing both do it similarly. The difference is that kretprobes
uses a shadow stack per callback and function graph tracer creates a
shadow stack for all tasks. The function graph tracer method makes it
possible to trace the return of all functions. As kretprobes now needs
that feature too, allowing it to use function graph tracer was needed.
BPF also wants to trace the return of many probes and its method
doesn't scale either. Having it use function graph tracer would
improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This
will allow kretprobes code to be removed in the future as it's version
will no longer be needed.
Note, function graph tracer is only limited to 16 simultaneous users,
due to shadow stack size and allocated slots"
* tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits)
fgraph: Use str_plural() in test_graph_storage_single()
function_graph: Add READ_ONCE() when accessing fgraph_array[]
ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct()
function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it
function_graph: Fix up ftrace_graph_ret_addr()
function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE
function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests
fgraph: Remove some unused functions
ftrace: Hide one more entry in stack trace when ftrace_pid is enabled
function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled
function_graph: Make fgraph_do_direct static key static
ftrace: Fix prototypes for ftrace_startup/shutdown_subops()
ftrace: Assign RCU list variable with rcu_assign_ptr()
ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU
ftrace: Declare function_trace_op in header to quiet sparse warning
ftrace: Add comments to ftrace_hash_move() and friends
ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify()
ftrace: Add comments to ftrace_hash_rec_disable/enable()
ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update()
ftrace: Rename dup_hash() and comment it
...
|
|
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
|
The uapi/asm/unistd_64.h and asm/syscall_table_64.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.
Unlike the other architectures using the asm-generic header, loongarch
uses none of the deprecated system calls at the moment.
Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When clone3() was introduced, it was not obvious how each architecture
deals with setting up the stack and keeping the register contents in
a fork()-like system call, so this was left for the architecture
maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those
that already implement it.
Five years later, we still have a few architectures left that are missing
clone3(), and the macro keeps getting in the way as it's fundamentally
different from all the other __ARCH_WANT_SYS_* macros that are meant
to provide backwards-compatibility with applications using older
syscalls that are no longer provided by default.
Address this by reversing the polarity of the macro, adding an
__ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't
already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3
from all the other ones.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The list of generated headers is rather outdated, some of these no longer
exist, while others are already listed in include/asm-generic/Kbuild
so there is no need to list them here.
As we start validating the list of headers against the files that exist,
the outdated ones now cause a warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Per-cpu struct kvm_steal_time is added here, its size is 64 bytes and
also defined as 64 bytes, so that the whole structure is in one physical
page.
When a VCPU is online, function pv_enable_steal_time() is called. This
function will pass guest physical address of struct kvm_steal_time and
tells hypervisor to enable steal time. When a vcpu is offline, physical
address is set as 0 and tells hypervisor to disable steal time.
Here is an output of vmstat on guest when there is workload on both host
and guest. It shows steal time stat information.
procs -----------memory---------- -----io---- -system-- ------cpu-----
r b swpd free inact active bi bo in cs us sy id wa st
15 1 0 7583616 184112 72208 20 0 162 52 31 6 43 0 20
17 0 0 7583616 184704 72192 0 0 6318 6885 5 60 8 5 22
16 0 0 7583616 185392 72144 0 0 1766 1081 0 49 0 1 50
16 0 0 7583616 184816 72304 0 0 6300 6166 4 62 12 2 20
18 0 0 7583632 184480 72240 0 0 2814 1754 2 58 4 1 35
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
