summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/cputable.c
AgeCommit message (Collapse)Author
2023-11-27powerpc: Make cpu_spec __ro_after_initMichael Ellerman
The cpu_spec is a struct holding various information about the CPU the kernel is executing on. It's populated early in boot and must not change after that. In particular the cpu_features and mmu_features hold the set of discovered CPU/MMU features and are used to set static keys for each feature, and do binary patching of assembly. So any change to the cpu_features/mmu_features later in boot will not be reflected in the state of the static keys or patched code. There is already logic to check that cpu_features/mmu_features don't change, see check_features() in feature-fixups.c. But as another layer of protection the entire cpu_spec should be read only after init, annotate it as such. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231025012452.1985680-1-mpe@ellerman.id.au
2023-08-02powerpc/kuap: Use MMU_FTR_KUAP on all and refactor disabling kuapChristophe Leroy
All but book3s/64 use a static branch key for disabling kuap. book3s/64 uses an mmu feature. Refactor all targets to use MMU_FTR_KUAP like book3s/64. For PPC32 that implies updating mmu features fixups once KUAP has been initialised. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6b3d7c977bad73378ea368bc6818e9c94ea95ab0.1689091022.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/cputable: Split cpu_specs[] out of cputable.hChristophe Leroy
cpu_specs[] is full of #ifdefs depending on the different types of CPU. CPUs are mutually exclusive, it is therefore possible to split cpu_specs[] into smaller more readable pieces. Create cpu_specs_XXX.h that will each be dedicated on one of the following mutually exclusive families: - 40x - 44x - 47x - 8xx - e500 - book3s/32 - book3s/64 In book3s/32, the block for 603 has been moved in front in order to not have two 604 blocks. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix CONFIG_47x to be CONFIG_PPC_47x, tweak some formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a44b865e0318286155273b10cdf524ab697928c1.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/cputable: Move __cpu_setup() prototypes out of cputable.hChristophe Leroy
Move all prototypes out of cputable.h For that rename cpu_setup_power.h to cpu_setup.h and move all prototypes in it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Standardise cpu_spec *spec formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f45118489ee450db654db8bbcdfd8f5907337c22.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/cputable: Remove __machine_check_early_realmode_p{7/8/9} prototypesChristophe Leroy
__machine_check_early_realmode_p{7/8/9} are already in mce.h which is included. Remove them from cputable.c Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b77fc0f90e3a9c065324cbff549b718ccf0809f8.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/64e: Tie PPC_BOOK3E_64 to PPC_E500MCChristophe Leroy
The only 64-bit Book3E CPUs we support require the selection of CONFIG_PPC_E500MC. However our Kconfig allows configurating a kernel that has 64-bit Book3E support, but without CONFIG_PPC_E500MC enabled. Such a kernel would never boot, it doesn't know about any CPUs. To fix this, force CONFIG_PPC_E500MC to be selected whenever we are building a 64-bit Book3E kernel. And add a test to detect future situations where cpu_specs is empty. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ae5d8b8b3ccc346e61d2ec729767f92766273f0b.1663606875.git.christophe.leroy@csgroup.eu
2022-07-27powerpc: Remove remaining parts of oprofileChristophe Leroy
Commit 9850b6c69356 ("arch: powerpc: Remove oprofile") removed oprofile. Remove all remaining parts of it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/298432fe1a14c0a415760011d72c3f0999efd5e2.1657204631.git.christophe.leroy@csgroup.eu
2022-05-22powerpc: Enable the DAWR on POWER9 DD2.3 and aboveReza Arbab
The hardware bug in POWER9 preventing use of the DAWR was fixed in DD2.3. Set the CPU_FTR_DAWR feature bit on these newer systems to start using it again, and update the documentation accordingly. The CPU features for DD2.3 are currently determined by "DD2.2 or later" logic. In adding DD2.3 as a discrete case for the first time here, I'm carrying the quirks of DD2.2 forward to keep all behavior outside of this DAWR change the same. This leaves the assessment and potential removal of those quirks on DD2.3 for later. Signed-off-by: Reza Arbab <arbab@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220503170152.23412-1-arbab@linux.ibm.com
2022-05-19powerpc: Export mmu_feature_keys[] as non-GPLKevin Hao
When the mmu_feature_keys[] was introduced in the commit c12e6f24d413 ("powerpc: Add option to use jump label for mmu_has_feature()"), it is unlikely that it would be used either directly or indirectly in the out of tree modules. So we exported it as GPL only. But with the evolution of the codes, especially the PPC_KUAP support, it may be indirectly referenced by some primitive macro or inline functions such as get_user() or __copy_from_user_inatomic(), this will make it impossible to build many non GPL modules (such as ZFS) on ppc architecture. Fix this by exposing the mmu_feature_keys[] to the non-GPL modules too. Fixes: 7613f5a66bec ("powerpc/64s/kuap: Use mmu_has_feature()") Reported-by: Nathaniel Filardo <nwfilardo@gmail.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220329085709.4132729-1-haokexin@gmail.com
2022-05-08powerpc: Add missing headersChristophe Leroy
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
2022-05-05powerpc: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
2021-01-29arch: powerpc: Stop building and using oprofileViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. This commits stops building oprofile for powerpc and removes any reference to it from directories in arch/powerpc/ apart from arch/powerpc/oprofile, which will be removed in the next commit (this is broken into two commits as the size of the commit became very big, ~5k lines). Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't removed as it was also used by other parts of the code. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2020-12-09powerpc/32s: Make support for 603 and 604+ selectableChristophe Leroy
book3s/32 has two main families: - CPU with 603 cores that don't have HASH PTE table and perform SW TLB loading. - Other CPUs based on 604+ cores that have HASH PTE table. This leads to some complex logic and additionnal code to support both. This makes sense for distribution kernels that aim at running on any CPU, but when you are fine tuning a kernel for an embedded 603 based board you don't need all the HASH logic. Allow selection of support for each family, in order to opt out unneeded parts of code. At least one must be selected. Note that some of the CPU supporting HASH also support SW TLB loading, however it is not supported by Linux kernel at the time being, because they do not have alternate registers in the TLB miss exception handlers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8dde0cdb629a71abc29b0d85a52a86e920376cb6.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Regroup 603 based CPUs in cputableChristophe Leroy
In order to selectively build the kernel for 603 SW TLB handling, regroup all 603 based CPUs together. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/45065263fdb9f5cc2a2d210ec2a762ac8bf5b2bc.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Remove CONFIG_PPC_BOOK3S_6xxChristophe Leroy
As 601 is gone, CONFIG_PPC_BOO3S_6xx and CONFIG_PPC_BOOK3S_32 are dedundant. Remove CONFIG_PPC_BOOK3S_6xx. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f18c16af37f6f77b577bed8d9e12831b695617ae.1603348103.git.christophe.leroy@csgroup.eu
2020-12-05powerpc: Retire e200 core (mpc555x processor)Christophe Leroy
There is no defconfig selecting CONFIG_E200, and no platform. e200 is an earlier version of booke, a predecessor of e500, with some particularities like an unified cache instead of both an instruction cache and a data cache. Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/34ebc3ba2c768d97f363bd5f2deea2356e9ae127.1605589460.git.christophe.leroy@csgroup.eu
2020-12-04powerpc/44x: Don't support 440 when CONFIG_PPC_47x is setChristophe Leroy
As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not compatible with 440 and 460 variants. This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different for 47x, meaning a kernel built for 47x will not run correctly on a 440. In cputable, opt out all 440 and 460 variants when CONFIG_PPC_47x is set. Also add a default match dedicated to 470. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/822833ce3dc10634339818f7d1ab616edf63b0c6.1603041883.git.christophe.leroy@csgroup.eu
2020-11-19powerpc/64s: Convert some cpu_setup() and cpu_restore() functions to CJordan Niethe
The only thing keeping the cpu_setup() and cpu_restore() functions used in the cputable entries for Power7, Power8, Power9 and Power10 in assembly was cpu_restore() being called before there was a stack in generic_secondary_smp_init(). Commit ("powerpc/64: Set up a kernel stack for secondaries before cpu_restore()") means that it is now possible to use C. Rewrite the functions in C so they are a little bit easier to read. This is not changing their functionality. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> [mpe: Tweak copyright and authorship notes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201014072837.24539-2-jniethe5@gmail.com
2020-10-20powerpc/64s: Remove TM from Power10 featuresJordan Niethe
ISA v3.1 removes transactional memory and hence it should not be present in cpu_features or cpu_user_features2. Remove CPU_FTR_TM_COMP from CPU_FTRS_POWER10. Remove PPC_FEATURE2_HTM_COMP and PPC_FEATURE2_HTM_NOSC_COMP from COMMON_USER2_POWER10. Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200827035529.900-1-jniethe5@gmail.com
2020-10-08powerpc: Remove PowerPC 601Christophe Leroy
Powerpc 601 is 25 years old. It is not selected by any defconfig. It requires a lot of special handling as it deviates from the standard 6xx. Retire it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/00a6948d659e017f8ca63437d1384222c3aede57.1601362098.git.christophe.leroy@csgroup.eu
2020-10-06powerpc: untangle cputable mce includeNicholas Piggin
Having cputable.h include mce.h means it pulls in a bunch of low level headers (e.g., synch.h) which then can't use CPU_FTR_ definitions. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200916030234.4110379-1-npiggin@gmail.com
2020-08-17powerpc/kernel: Cleanup machine check function declarationsMadhavan Srinivasan
__machine_check_early_realmode_p*() are currently declared as extern in cputable.c and because of this when compiled with "C=1" (which enables semantic checker) produces these warnings. CHECK arch/powerpc/kernel/mce_power.c arch/powerpc/kernel/mce_power.c:709:6: warning: symbol '__machine_check_early_realmode_p7' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:717:6: warning: symbol '__machine_check_early_realmode_p8' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:722:6: warning: symbol '__machine_check_early_realmode_p9' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:740:6: warning: symbol '__machine_check_early_realmode_p10' was not declared. Should it be static? Patch here moves the declaration to asm/mce.h and includes the same in cputable.c Fixes: ae744f3432d3 ("powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8") Fixes: 7b9f71f974a1 ("powerpc/64s: POWER9 machine check handler") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817005618.3305028-1-maddy@linux.ibm.com
2020-08-17powerpc: Add POWER10 raw mode cputable entryMadhavan Srinivasan
Add a raw mode cputable entry for POWER10. Copies most of the fields from commit a3ea40d5c736 ("powerpc: Add POWER10 architected mode") except for oprofile_cpu_type, machine_check_early, pvr_mask and pvr_mask fields. On bare metal systems we use DT CPU features, which doesn't need a cputable entry. But in VMs we still rely on the raw cputable entry to set the correct values for the PMU related fields. Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> [mpe: Reorder vs cleanup patch and add Fixes tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817005618.3305028-2-maddy@linux.ibm.com
2020-07-22powerpc/64s: system call support for scv/rfscv instructionsNicholas Piggin
Add support for the scv instruction on POWER9 and later CPUs. For now this implements the zeroth scv vector 'scv 0', as identical to 'sc' system calls, with the exception that LR is not preserved, nor are volatile CR registers, and error is not indicated with CR0[SO], but by returning a negative errno. rfscv is implemented to return from scv type system calls. It can not be used to return from sc system calls because those are defined to preserve LR. getpid syscall throughput on POWER9 is improved by 26% (428 to 318 cycles), largely due to reducing mtmsr and mtspr. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix ppc64e build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
2020-06-02powerpc: Add POWER10 architected modeAlistair Popple
PVR value of 0x0F000006 means we are arch v3.1 compliant (i.e. POWER10). This is used by phyp and kvm when booting as a pseries guest to detect the presence of new P10 features and to enable the appropriate hwcap and facility bits. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> [mpe: Fall through to __init_FSCR rather than duplicating it, drop hack to set current->thread.fscr now that is handled elsewhere.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200521014341.29095-8-alistair@popple.id.au
2020-05-28powerpc/40x: Remove support for IBM 405GPChristophe Leroy
All platforms selecting the obsolete processor are gone now. Remove support for it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/906c6a6df710f2826e332b8a0cd5d2859a913a1c.1590079969.git.christophe.leroy@csgroup.eu
2020-05-28powerpc/40x: Remove STB03xxxChristophe Leroy
CONFIG_STB03xxx is not user selectable and is not selected by any config. Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d7d73f9a8ee3a890566abace568101e9b4836016.1590079968.git.christophe.leroy@csgroup.eu
2020-05-28powerpc/40x: Remove support for IBM 403GCXChristophe Leroy
CONFIG_403GCX is not user selectable and is not selected by any platform. Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/635f8f5ce9d1f761b3bd8dc3e8ddad500cea26c4.1590079968.git.christophe.leroy@csgroup.eu
2020-05-28powerpc: Remove Xilinx PPC405/PPC440 supportMichal Simek
The latest Xilinx design tools called ISE and EDK has been released in October 2013. New tool doesn't support any PPC405/PPC440 new designs. These platforms are no longer supported and tested. PowerPC 405/440 port is orphan from 2013 by commit cdeb89943bfc ("MAINTAINERS: Fix incorrect status tag") and commit 19624236cce1 ("MAINTAINERS: Update Grant's email address and maintainership") that's why it is time to remove the support fot these platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
2020-04-01powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_typeLeonardo Bras
Before checking for cpu_type == NULL, this same copy happens, so doing it here will just write the same value to the t->oprofile_type again. Remove the repeated copy, as it is unnecessary. Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com> Reviewed-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200215053637.280880-1-leonardo@linux.ibm.com
2020-02-28powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systemsDesnes A. Nunes do Rosario
PowerVM systems running compatibility mode on a few Power8 revisions are still vulnerable to the hardware defect that loses PMU exceptions arriving prior to a context switch. The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG cpu_feature bit, nevertheless this bit also needs to be set for PowerVM compatibility mode systems. Fixes: 68f2f0d431d9ea4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG") Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200227134715.9715-1-desnesn@linux.ibm.com
2019-08-28powerpc/32s: get rid of CPU_FTR_601 featureChristophe Leroy
Now that 601 is exclusive from other 6xx, CPU_FTR_601 and associated fixups are useless. Drop this feature and use #ifdefs instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ecdb7194a17dbfa01865df6a82979533adc2c70b.1566834712.git.christophe.leroy@c-s.fr
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03powerpc: don't use direct assignation during early boot.Christophe Leroy
In kernel/cputable.c, explicitly use memcpy() instead of *y = *x; This will allow GCC to replace it with __memcpy() when KASAN is selected. Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21powerpc/83xx: handle machine check caused by watchdog timerChristophe Leroy
When the watchdog timer is set in interrupt mode, it causes a machine check when it times out. The purpose of this mode is to ease debugging, not to crash the kernel and reboot the machine. This patch implements a special handling for that, in order to not crash the kernel if the watchdog times out while in interrupt or within the idle task. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood: added missing #include] Signed-off-by: Scott Wood <oss@buserror.net>
2018-07-19Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge in some commits we're sharing with the KVM tree. I manually propagated the change from commit d3d4ffaae439 ("powerpc/powernv/ioda2: Reduce upper limit for DMA window size") into pci-ioda-tce.c. Conflicts: arch/powerpc/include/asm/cputable.h arch/powerpc/platforms/powernv/pci-ioda.c arch/powerpc/platforms/powernv/pci.h
2018-07-16powerpc/64s: Remove POWER9 DD1 supportNicholas Piggin
POWER9 DD1 was never a product. It is no longer supported by upstream firmware, and it is not effectively supported in Linux due to lack of testing. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [mpe: Remove arch_make_huge_pte() entirely] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-12powerpc: Remove Power8 DD1 from cputableJoel Stanley
This was added to support an early version of Power8 that did not have working doorbells. These machines were not publicly available, and all of the internal users have long since upgraded. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/64s: Remove POWER4 supportNicholas Piggin
POWER4 has been broken since at least the change 49d09bf2a6 ("powerpc/64s: Optimise MSR handling in exception handling"), which requires mtmsrd L=1 support. This was introduced in ISA v2.01, and POWER4 supports ISA v2.00. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-24KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9Paul Mackerras
POWER9 has hardware bugs relating to transactional memory and thread reconfiguration (changes to hardware SMT mode). Specifically, the core does not have enough storage to store a complete checkpoint of all the architected state for all four threads. The DD2.2 version of POWER9 includes hardware modifications designed to allow hypervisor software to implement workarounds for these problems. This patch implements those workarounds in KVM code so that KVM guests see a full, working transactional memory implementation. The problems center around the use of TM suspended state, where the CPU has a checkpointed state but execution is not transactional. The workaround is to implement a "fake suspend" state, which looks to the guest like suspended state but the CPU does not store a checkpoint. In this state, any instruction that would cause a transition to transactional state (rfid, rfebb, mtmsrd, tresume) or would use the checkpointed state (treclaim) causes a "soft patch" interrupt (vector 0x1500) to the hypervisor so that it can be emulated. The trechkpt instruction also causes a soft patch interrupt. On POWER9 DD2.2, we avoid returning to the guest in any state which would require a checkpoint to be present. The trechkpt in the guest entry path which would normally create that checkpoint is replaced by either a transition to fake suspend state, if the guest is in suspend state, or a rollback to the pre-transactional state if the guest is in transactional state. Fake suspend state is indicated by a flag in the PACA plus a new bit in the PSSCR. The new PSSCR bit is write-only and reads back as 0. On exit from the guest, if the guest is in fake suspend state, we still do the treclaim instruction as we would in real suspend state, in order to get into non-transactional state, but we do not save the resulting register state since there was no checkpoint. Emulation of the instructions that cause a softpatch interrupt is handled in two paths. If the guest is in real suspend mode, we call kvmhv_p9_tm_emulation_early() to handle the cases where the guest is transitioning to transactional state. This is called before we do the treclaim in the guest exit path; because we haven't done treclaim, we can get back to the guest with the transaction still active. If the instruction is a case that kvmhv_p9_tm_emulation_early() doesn't handle, or if the guest is in fake suspend state, then we proceed to do the complete guest exit path and subsequently call kvmhv_p9_tm_emulation() in host context with the MMU on. This handles all the cases including the cases that generate program interrupts (illegal instruction or TM Bad Thing) and facility unavailable interrupts. The emulation is reasonably straightforward and is mostly concerned with checking for exception conditions and updating the state of registers such as MSR and CR0. The treclaim emulation takes care to ensure that the TEXASR register gets updated as if it were the guest treclaim instruction that had done failure recording, not the treclaim done in hypervisor state in the guest exit path. With this, the KVM_CAP_PPC_HTM capability returns true (1) even if transactional memory is not available to host userspace. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-24powerpc: Add CPU feature bits for TM bug workarounds on POWER9 v2.2Paul Mackerras
This adds a CPU feature bit which is set for POWER9 "Nimbus" DD2.2 processors which will be used to enable the hypervisor to assist hardware with the handling of checkpointed register values while the CPU is in suspend state, in order to work around hardware bugs. The hardware assistance for these workarounds introduced a new hardware bug relating to the XER[SO] bit. We add a separate feature bit for this bug in case future chips fix it while still requiring the hypervisor assistance with suspend state. When the dt_cpu_ftrs subsystem is in use, the software assistance can be enabled using a "tm-suspend-hypervisor-assist" node in the device tree, and a "tm-suspend-xer-so-bug" node enables the workarounds for the XER[SO] bug. In the absence of such nodes, a quirk enables both for POWER9 "Nimbus" DD2.2 processors. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18powerpc/64s: Improve local TLB flush for boot and MCE on POWER9Nicholas Piggin
There are several cases outside the normal address space management where a CPU's entire local TLB is to be flushed: 1. Booting the kernel, in case something has left stale entries in the TLB (e.g., kexec). 2. Machine check, to clean corrupted TLB entries. One other place where the TLB is flushed, is waking from deep idle states. The flush is a side-effect of calling ->cpu_restore with the intention of re-setting various SPRs. The flush itself is unnecessary because in the first case, the TLB should not acquire new corrupted TLB entries as part of sleep/wake (though they may be lost). This type of TLB flush is coded inflexibly, several times for each CPU type, and they have a number of problems with ISA v3.0B: - The current radix mode of the MMU is not taken into account, it is always done as a hash flushn For IS=2 (LPID-matching flush from host) and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if the R field does not match the current radix mode. - ISA v3.0B hash must flush the partition and process table caches as well. - ISA v3.0B radix must flush partition and process scoped translations, partition and process table caches, and also the page walk cache. So consolidate the flushing code and implement it in C and inline asm under the mm/ directory with the rest of the flush code. Add ISA v3.0B cases for radix and hash, and use the radix flush in radix environment. Provide a way for IS=2 (LPID flush) to specify the radix mode of the partition. Have KVM pass in the radix mode of the guest. Take out the flushes from early cputable/dt_cpu_ftrs detection hooks, and move it later in the boot process after, the MMU registers are set up and before relocation is first turned on. The TLB flush is no longer called when restoring from deep idle states. This was not be done as a separate step because booting secondaries uses the same cpu_restore as idle restore, which needs the TLB flush. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-15powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 featureMichael Ellerman
Recently we added a CPU feature for Power9 DD2.0, to capture the fact that some workarounds are required only on Power9 DD1 and DD2.0 but not DD2.1 or later. Then in commit 9d2f510a66ec ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 ERAT workaround on DD2.1") and commit e3646330cf66 "powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 PMU workaround on DD2.1") we changed CPU_FTR_SECTIONs to check for DD1 or DD20, eg: BEGIN_FTR_SECTION PPC_INVALIDATE_ERAT END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1 | CPU_FTR_POWER9_DD20) Unfortunately although this reads as "if set DD1 or DD2.0", the or is a bitwise or and actually generates a mask of both bits. The code that does the feature patching then checks that the value of the CPU features masked with that mask are equal to the mask. So the end result is we're checking for DD1 and DD20 being set, which never happens. Yes the API is terrible. Removing the ERAT workaround on DD2.0 results in random SEGVs, the system tends to boot, but things randomly die including sometimes dhclient, udev etc. To fix the problem and hopefully avoid it in future, we remove the DD2.0 CPU feature and instead add a DD2.1 (or later) feature. This allows us to easily express that the workarounds are required if DD2.1 is not set. At some point we will drop the DD1 workarounds entirely and some of this can be cleaned up. Fixes: 9d2f510a66ec ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 ERAT workaround on DD2.1") Fixes: e3646330cf66 ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 PMU workaround on DD2.1") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc: add POWER9_DD20 featureNicholas Piggin
Cc: Michael Neuling <mikey@neuling.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10powerpc/8xx: Use symbolic PVR valueChristophe Leroy
For the 8xx, PVR values defined in arch/powerpc/include/asm/reg.h are nowhere used. Remove all defines and add PVR_8xx Use it in arch/powerpc/kernel/cputable.c Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10powerpc/8xx: Getting rid of remaining use of CONFIG_8xxChristophe Leroy
Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" arch/powerpc is now the only place with remaining use of CONFIG_8xx: get rid of them. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10powerpc/47x: Guard 47x cputable entries with CONFIG_PPC_47xMichael Ellerman
Currently we build the 47x cputable entries even when CONFIG_PPC_47x is disabled. That means a kernel built without CONFIG_PPC_47x will claim to support a 47x CPU and start booting, only to break somewhere later because it doesn't have 47x support compiled in. So guard the 47x cputable entries with CONFIG_PPC_47x. Note that this is inside the #ifdef CONFIG_44x section, because 47x depends on 44x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-25powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructionsNicholas Piggin
Providing "scv" support to userspace requires kernel support, so it must be advertised as independently to the base ISA 3 instruction set. The darn instruction relies on firmware enablement, so it has been decided to split this out from the core ISA 3 feature as well. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-09powerpc/64s: Support new device tree binding for discovering CPU featuresNicholas Piggin
The ibm,powerpc-cpu-features device tree binding describes CPU features with ASCII names and extensible compatibility, privilege, and enablement metadata that allows improved flexibility and compatibility with new hardware. The interface is described in detail in ibm,powerpc-cpu-features.txt in this patch. Currently this code is not enabled by default, and there are no released firmwares that provide the binding. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-10powerpc/64s: POWER9 machine check handlerNicholas Piggin
Add POWER9 machine check handler. There are several new types of errors added, so logging messages for those are also added. This doesn't attempt to reuse any of the P7/8 defines or functions, because that becomes too complex. The better option in future is to use a table driven approach. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-26 08:43:09 +0000