Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a smattering of changes all over the place which we've
acrued since -rc1. To my knowledge, there aren't any pending issues at
the moment, but there's still plenty of time for something else to
crop up...
Summary:
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe()
arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
arm64: perf: Fix 64-bit event counter read truncation
arm64/mm: Fix __enable_mmu() for new TGRAN range values
kselftest: arm64: Fix exit code of sve-ptrace
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64/mm: Reorganize pfn_valid()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER
arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE
arm64: Drop support for CMDLINE_EXTEND
arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fix series and a single cleanup:
- a small cleanup patch to remove unneeded symbol exports
- a series to cleanup Xen grant handling (avoiding allocations in
some cases, and using common defines for "invalid" values)
- a series to address a race issue in Xen event channel handling"
* tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/gntdev: don't needlessly use kvcalloc()
Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}
Xen/gntdev: don't needlessly allocate k{,un}map_ops[]
Xen: drop exports of {set,clear}_foreign_p2m_mapping()
xen/events: avoid handling the same event on two cpus at the same time
xen/events: don't unmask an event channel when an eoi is pending
xen/events: reset affinity of 2-level event when tearing it down
|
|
These routines lost all existing users during the latest merge window so
we can remove them. This avoids the need to fix them in the context of
fixing a regression related to the ID map on 52-bit VA kernels.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210310171515.416643-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
52-bit VA kernels can run on hardware that is only 48-bit capable, but
configure the ID map as 52-bit by default. This was not a problem until
recently, because the special T0SZ value for a 52-bit VA space was never
programmed into the TCR register anwyay, and because a 52-bit ID map
happens to use the same number of translation levels as a 48-bit one.
This behavior was changed by commit 1401bef703a4 ("arm64: mm: Always update
TCR_EL1 from __cpu_set_tcr_t0sz()"), which causes the unsupported T0SZ
value for a 52-bit VA to be programmed into TCR_EL1. While some hardware
simply ignores this, Mark reports that Amberwing systems choke on this,
resulting in a broken boot. But even before that commit, the unsupported
idmap_t0sz value was exposed to KVM and used to program TCR_EL2 incorrectly
as well.
Given that we already have to deal with address spaces being either 48-bit
or 52-bit in size, the cleanest approach seems to be to simply default to
a 48-bit VA ID map, and only switch to a 52-bit one if the placement of the
kernel in DRAM requires it. This is guaranteed not to happen unless the
system is actually 52-bit VA capable.
Fixes: 90ec95cda91a ("arm64: mm: Introduce VA_BITS_MIN")
Reported-by: Mark Salter <msalter@redhat.com>
Link: http://lore.kernel.org/r/20210310003216.410037-1-msalter@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210310171515.416643-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
It's not helpful if every driver has to cook its own. Generalize
xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which
shouldn't have expanded to zero to begin with). Use the constants in
p2m.c and gntdev.c right away, and update field types where necessary so
they would match with the constants' types (albeit without touching
struct ioctl_gntdev_grant_ref's ref field, as that's part of the public
interface of the kernel and would require introducing a dependency on
Xen's grant_table.h public header).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/db7c38a5-0d75-d5d1-19de-e5fe9f0b9c48@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
They're only used internally, and the layering violation they contain
(x86) or imply (Arm) of calling HYPERVISOR_grant_table_op() strongly
advise against any (uncontrolled) use from a module. The functions also
never had users except the ones from drivers/xen/grant-table.c forever
since their introduction in 3.15.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/746a5cd6-1446-eda4-8b23-03c1cac30b8d@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix various user space visible copy_to_user() instances which return
the number of bytes left to copy instead of -EFAULT
- make TMPFS_INODE64 available again for s390 and alpha, now that both
architectures have been switched to 64-bit ino_t (see commit
96c0a6a72d18: "s390,alpha: switch to 64-bit ino_t")
- make sure to release a shared hypervisor resource within the zcore
device driver also on restart and power down; also remove unneeded
surrounding debugfs_create return value checks
- for the new hardware counter set device driver rename the uapi header
file to be a bit more generic; also remove 60 second read limit which
is not really necessary and without the limit the interface can be
easier tested
- some small cleanups, the largest being to convert all long long in
our time and idle code to longs
- update defconfigs
* tag 's390-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: remove IBM_PARTITION and CONFIGFS_FS from zfcpdump defconfig
s390: update defconfigs
s390,alpha: make TMPFS_INODE64 available again
s390/cio: return -EFAULT if copy_to_user() fails
s390/tty3270: avoid comma separated statements
s390/cpumf: remove unneeded semicolon
s390/crypto: return -EFAULT if copy_to_user() fails
s390/cio: return -EFAULT if copy_to_user() fails
s390/cpumf: rename header file to hwctrset.h
s390/zcore: release dump save area on restart or power down
s390/zcore: no need to check return value of debugfs_create functions
s390/cpumf: remove 60 seconds read limit
s390/topology: remove always false if check
s390/time,idle: get rid of unsigned long long
|
|
Commit 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection") changed
armv8pmu_read_evcntr() to return a u32 instead of u64. The result is
silent truncation of the event counter when using 64-bit counters. Given
the offending commit appears to have passed thru several folks, it seems
likely this was a bad rebase after v8.5 PMU 64-bit counters landed.
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection")
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210310004412.1450128-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As per ARM ARM DDI 0487G.a, when FEAT_LPA2 is implemented, ID_AA64MMFR0_EL1
might contain a range of values to describe supported translation granules
(4K and 16K pages sizes in particular) instead of just enabled or disabled
values. This changes __enable_mmu() function to handle complete acceptable
range of values (depending on whether the field is signed or unsigned) now
represented with ID_AA64MMFR0_TGRAN_SUPPORTED_[MIN..MAX] pair. While here,
also fix similar situations in EFI stub and KVM as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1615355590-21102-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In a system supporting MTE, the linear map must allow reading/writing
allocation tags by setting the memory type as Normal Tagged. Currently,
this is only handled for memory present at boot. Hotplugged memory uses
Normal non-Tagged memory.
Introduce pgprot_mhp() for hotplugged memory and use it in
add_memory_resource(). The arm64 code maps pgprot_mhp() to
pgprot_tagged().
Note that ZONE_DEVICE memory should not be mapped as Tagged and
therefore setting the memory type in arch_add_memory() is not feasible.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map")
Reported-by: Patrick Daly <pdaly@codeaurora.org>
Tested-by: Patrick Daly <pdaly@codeaurora.org>
Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
|
|
Pull sparc fixes from David Miller:
"Fix opcode filtering for exceptions, and clean up defconfig"
* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
sparc: sparc64_defconfig: remove duplicate CONFIGs
sparc64: Fix opcode filtering in handling of no fault loads
|
|
After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a57cdeb369ef ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.
The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.
The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.
The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
if ((asi & 0xf2) == ASI_PNF)
An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.
In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for boot breakage because of misaligned FDTs
- fix for overwritten exception handlers
- enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
performance
* tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kernel: Reserve exception base early to prevent corruption
MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
crypto: mips/poly1305 - enable for all MIPS processors
MIPS: boot/compressed: Copy DTB to aligned address
|
|
When CONFIG_DEBUG_VIRTUAL is enabled, the default page_to_virt() macro
implementation from include/linux/mm.h is used. That definition doesn't
account for KASAN tags, which leads to no tags on page_alloc allocations.
Provide an arm64-specific definition for page_to_virt() when
CONFIG_DEBUG_VIRTUAL is enabled that takes care of KASAN tags.
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/4b55b35202706223d3118230701c6a59749d9b72.1615219501.git.andreyknvl@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb39645441 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.
Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].
The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.
To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.
Huge thanks to Serge for analysing and proposing a solution to this
issue.
Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull sparc updates from David Miller:
"Just some more random bits from Al, including a conversion over to
generic extables"
* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
sparc32: take ->thread.flags out
sparc32: get rid of fake_swapper_regs
sparc64: get rid of fake_swapper_regs
sparc32: switch to generic extables
sparc32: switch copy_user.S away from range exception table entries
sparc32: get rid of range exception table entries in checksum_32.S
sparc32: switch __bzero() away from range exception table entries
sparc32: kill lookup_fault()
sparc32: don't bother with lookup_fault() in __bzero()
|
|
There are multiple instances of pfn_to_section_nr() and __pfn_to_section()
when CONFIG_SPARSEMEM is enabled. This can be optimized if memory section
is fetched earlier. This replaces the open coded PFN and ADDR conversion
with PFN_PHYS() and PHYS_PFN() helpers. While there, also add a comment.
This does not cause any functional change.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1614921898-4099-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pfn_valid() validates a pfn but basically it checks for a valid struct page
backing for that pfn. It should always return positive for memory ranges
backed with struct page mapping. But currently pfn_valid() fails for all
ZONE_DEVICE based memory types even though they have struct page mapping.
pfn_valid() asserts that there is a memblock entry for a given pfn without
MEMBLOCK_NOMAP flag being set. The problem with ZONE_DEVICE based memory is
that they do not have memblock entries. Hence memblock_is_map_memory() will
invariably fail via memblock_search() for a ZONE_DEVICE based address. This
eventually fails pfn_valid() which is wrong. memblock_is_map_memory() needs
to be skipped for such memory ranges. As ZONE_DEVICE memory gets hotplugged
into the system via memremap_pages() called from a driver, their respective
memory sections will not have SECTION_IS_EARLY set.
Normal hotplug memory will never have MEMBLOCK_NOMAP set in their memblock
regions. Because the flag MEMBLOCK_NOMAP was specifically designed and set
for firmware reserved memory regions. memblock_is_map_memory() can just be
skipped as its always going to be positive and that will be an optimization
for the normal hotplug memory. Like ZONE_DEVICE based memory, all normal
hotplugged memory too will not have SECTION_IS_EARLY set for their sections
Skipping memblock_is_map_memory() for all non early memory sections would
fix pfn_valid() problem for ZONE_DEVICE based memory and also improve its
performance for normal hotplug memory as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1614921898-4099-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The devicetree specification requires 8-byte alignment in
memory. This is now enforced by libfdt since commit 79edff12060f
("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
which included the upstream commit 5e735860c478 ("libfdt: Check for
8-byte address alignment in fdt_ro_probe_()").
This broke the MIPS raw appended DTBs which would be appended to
the image immediately following the initramfs section. This ends
with a 32bit size, resulting in a 4-byte alignment of the DTB.
Fix by padding with zeroes to 8-bytes when MIPS_RAW_APPENDED_DTB
is defined.
Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Currently without THP being enabled, MAX_ORDER via FORCE_MAX_ZONEORDER gets
reduced to 11, which falls below HUGETLB_PAGE_ORDER for certain 16K and 64K
page size configurations. This is problematic which throws up the following
warning during boot as pageblock_order via HUGETLB_PAGE_ORDER order exceeds
MAX_ORDER.
WARNING: CPU: 7 PID: 127 at mm/vmstat.c:1092 __fragmentation_index+0x58/0x70
Modules linked in:
CPU: 7 PID: 127 Comm: kswapd0 Not tainted 5.12.0-rc1-00005-g0221e3101a1 #237
Hardware name: linux,dummy-virt (DT)
pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--)
pc : __fragmentation_index+0x58/0x70
lr : fragmentation_index+0x88/0xa8
sp : ffff800016ccfc00
x29: ffff800016ccfc00 x28: 0000000000000000
x27: ffff800011fd4000 x26: 0000000000000002
x25: ffff800016ccfda0 x24: 0000000000000002
x23: 0000000000000640 x22: ffff0005ffcb5b18
x21: 0000000000000002 x20: 000000000000000d
x19: ffff0005ffcb3980 x18: 0000000000000004
x17: 0000000000000001 x16: 0000000000000019
x15: ffff800011ca7fb8 x14: 00000000000002b3
x13: 0000000000000000 x12: 00000000000005e0
x11: 0000000000000003 x10: 0000000000000080
x9 : ffff800011c93948 x8 : 0000000000000000
x7 : 0000000000000000 x6 : 0000000000007000
x5 : 0000000000007944 x4 : 0000000000000032
x3 : 000000000000001c x2 : 000000000000000b
x1 : ffff800016ccfc10 x0 : 000000000000000d
Call trace:
__fragmentation_index+0x58/0x70
compaction_suitable+0x58/0x78
wakeup_kcompactd+0x8c/0xd8
balance_pgdat+0x570/0x5d0
kswapd+0x1e0/0x388
kthread+0x154/0x158
ret_from_fork+0x10/0x30
This solves the problem via keeping FORCE_MAX_ZONEORDER unchanged with or
without THP on 16K and 64K page size configurations, making sure that the
HUGETLB_PAGE_ORDER (and pageblock_order) would never exceed MAX_ORDER.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1614597914-28565-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is already an ARCH_WANT_HUGE_PMD_SHARE which is being selected for
applicable configurations. Hence just drop the other redundant entry.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1614575192-21307-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The documented behaviour for CMDLINE_EXTEND is that the arguments from
the bootloader are appended to the built-in kernel command line. This
also matches the option parsing behaviour for the EFI stub and early ID
register overrides.
Bizarrely, the fdt behaviour is the other way around: appending the
built-in command line to the bootloader arguments, resulting in a
command-line that doesn't necessarily line-up with the parsing order and
definitely doesn't line-up with the documented behaviour.
As it turns out, there is a proposal [1] to replace CMDLINE_EXTEND with
CMDLINE_PREPEND and CMDLINE_APPEND options which should hopefully make
the intended behaviour much clearer. While we wait for those to land,
drop CMDLINE_EXTEND for now as there appears to be little enthusiasm for
changing the current FDT behaviour.
[1] https://lore.kernel.org/lkml/20190319232448.45964-2-danielwa@cisco.com/
Cc: Max Uvarov <muvarov@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/CAL_JsqJX=TCCs7=gg486r9TN4NYscMTCLNfqJF9crskKPq-bTg@mail.gmail.com
Link: https://lore.kernel.org/r/20210303134927.18975-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The built-in kernel commandline (CONFIG_CMDLINE) can be configured in
three different ways:
1. CMDLINE_FORCE: Use CONFIG_CMDLINE instead of any bootloader args
2. CMDLINE_EXTEND: Append the bootloader args to CONFIG_CMDLINE
3. CMDLINE_FROM_BOOTLOADER: Only use CONFIG_CMDLINE if there aren't
any bootloader args.
The early cmdline parsing to detect idreg overrides gets (2) and (3)
slightly wrong: in the case of (2) the bootloader args are parsed first
and in the case of (3) the CMDLINE is always parsed.
Fix these issues by moving the bootargs parsing out into a helper
function and following the same logic as that used by the EFI stub.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Fixes: 33200303553d ("arm64: cpufeature: Add an early command-line cpufeature override facility")
Link: https://lore.kernel.org/r/20210303134927.18975-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since 5.12-rc1, the Device Tree blob must now be properly aligned.
Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.
This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.
Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove by zfcpdump unused CONFIG_IBM_PARTITION and CONFIG_CONFIGFS_FS.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix the following coccicheck warnings:
./arch/s390/kernel/perf_cpum_cf.c:272:2-3: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/1614233736-87331-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Hendrick Brueckner <brueckner@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove the 60 seconds read interval limit. Do not impose any limit
at all and allow read of complete counter sets.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The cpumask being checked in cpu_group_map() must have at least one
cpu set; therefore remove the check.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of unsigned long long, and use unsigned long instead
everywhere. The usage of unsigned long long is a leftover from
31 bit kernel support.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Two small parisc architecture fixes: fix a linking failure reported by
the kernel test robot and remove a duplicate include"
* 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
arch/parisc/kernel: remove duplicate include in ptrace
parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One non-fix, the conversion of vio_driver->remove() to return void,
which touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause
soft/hard lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
offline in the second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only
be seen when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
Tyrel Datwyler, and Uwe Kleine-König"
* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/sstep: Fix VSX instruction emulation
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc: Force inlining of mmu_has_feature to fix build failure
vio: make remove callback return void
powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
powerpc/603: Fix protection of user pages mapped with PROT_NONE
powerpc/pseries: Don't enforce MSI affinity with kdump
powerpc/4xx: Fix build errors from mfdcr()
|
|
If CONFIG_DEBUG_SG=y, and CONFIG_MMU=y:
include/linux/scatterlist.h: In function ‘sg_set_buf’:
arch/m68k/include/asm/page_mm.h:174:49: warning: ordered comparison of pointer with null pointer [-Wextra]
174 | #define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
| ^~
or CONFIG_MMU=n:
include/linux/scatterlist.h: In function ‘sg_set_buf’:
arch/m68k/include/asm/page_no.h:33:50: warning: ordered comparison of pointer with null pointer [-Wextra]
33 | #define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
| ^~
Fix this by doing the comparison in the "unsigned long" instead of the
"void *" domain.
Note that for now this is only seen when compiling btrfs, due to commit
e9aa7c285d20a69c ("btrfs: enable W=1 checks for btrfs"), but as people
are doing more W=1 compile testing, it will start to show up elsewhere,
too.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/20210305084122.4118826-1-geert@linux-m68k.org
|
|
Pull KVM fixes from Paolo Bonzini:
- Doc fixes
- selftests fixes
- Add runstate information to the new Xen support
- Allow compiling out the Xen interface
- 32-bit PAE without EPT bugfix
- NULL pointer dereference bugfix
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Clear the CR4 register on reset
KVM: x86/xen: Add support for vCPU runstate information
KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_info
selftests: kvm: Mmap the entire vcpu mmap area
KVM: Documentation: Fix index for KVM_CAP_PPC_DAWR1
KVM: x86: allow compiling out the Xen hypercall interface
KVM: xen: flush deferred static key before checking it
KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled
KVM: x86: hyper-v: Fix Hyper-V context null-ptr-deref
KVM: x86: remove misplaced comment on active_mmu_pages
KVM: Documentation: rectify rst markup in kvm_run->flags
Documentation: kvm: fix messy conversion from .txt to .rst
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two security issues (XSA-367 and XSA-369)"
* tag 'for-linus-5.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix p2m size in dom0 for disabled memory hotplug case
xen-netback: respect gnttab_map_refs()'s return value
Xen/gnttab: handle p2m update errors on a per-slot basis
|
|
'linux/compat.h' included in 'arch/parisc/kernel/ptrace.c' is duplicated.
It is also included in the 24th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Since commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated
memory") foreign mappings are using guest physical addresses allocated
via ZONE_DEVICE functionality.
This will result in problems for the case of no balloon memory hotplug
being configured, as the p2m list will only cover the initial memory
size of the domain. Any ZONE_DEVICE allocated address will be outside
the p2m range and thus a mapping can't be established with that memory
address.
Fix that by extending the p2m size for that case. At the same time add
a check for a to be created mapping to be within the p2m limits in
order to detect errors early.
While changing a comment, remove some 32-bit leftovers.
This is XSA-369.
Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory")
Cc: <stable@vger.kernel.org> # 5.9
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating
error leaves the full batch in an ambiguous state as far as the caller
is concerned. Instead flags respective slots as bad, unmapping what
was mapped there right away.
HYPERVISOR_grant_table_op()'s return value and the individual unmap
slots' status fields get used only for a one-time - there's not much we
can do in case of a failure.
Note that there's no GNTST_enomem or alike, so GNTST_general_error gets
used.
The map ops' handle fields get overwritten just to be on the safe side.
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Sergei and John both reported that ia64 failed to boot in 5.11, and it
was related to signals. Turns out the ia64 signal handling is a bit odd,
it doesn't check the return value of get_signal() for whether there's a
signal to deliver or not. With the introduction of TIF_NOTIFY_SIGNAL,
then task_work could trigger it.
Fix it by only calling handle_signal() if we actually have a real signal
to deliver. This brings it in line with all other archs, too.
Fixes: b269c229b0e8 ("ia64: add support for TIF_NOTIFY_SIGNAL")
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kernel test robot reported multiple linkage problems like this:
hppa64-linux-ld: init/main.o(.init.text+0x56c): cannot reach printk
init/main.o: in function `unknown_bootoption':
(.init.text+0x56c): relocation truncated to fit: R_PARISC_PCREL22F against
symbol `printk' defined in .text.unlikely section in kernel/printk/printk.o
There are two ways to solve it:
a) Enable the -mlong-call compiler option (CONFIG_MLONGCALLS),
b) Add long branch stub support in 64-bit linker.
While b) is the long-term solution, this patch works around the issue by
automatically enabling the CONFIG_MLONGCALLS option when
CONFIG_COMPILE_TEST is set, which indicates that a non-production kernel
(e.g. 0-day kernel) is built.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 00e35f2b0e8a ("parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES")
Cc: stable@vger.kernel.org # v5.6+
|
|
This problem was reported on a SVM guest while executing kexec.
Kexec fails to load the new kernel when the PCID feature is enabled.
When kexec starts loading the new kernel, it starts the process by
resetting the vCPU's and then bringing each vCPU online one by one.
The vCPU reset is supposed to reset all the register states before the
vCPUs are brought online. However, the CR4 register is not reset during
this process. If this register is already setup during the last boot,
all the flags can remain intact. The X86_CR4_PCIDE bit can only be
enabled in long mode. So, it must be enabled much later in SMP
initialization. Having the X86_CR4_PCIDE bit set during SMP boot can
cause a boot failures.
Fix the issue by resetting the CR4 register in init_vmcb().
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161471109108.30811.6392805173629704166.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When clearing the per-vCPU shared regions, set the return value to zero
to indicate success. This was causing spurious errors to be returned to
userspace on soft reset.
Also add a paranoid BUILD_BUG_ON() for compat structure compatibility.
Fixes: 0c165b3c01fe ("KVM: x86/xen: Allow reset of Xen attributes")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Xen hypercall interface adds to the attack surface of the hypervisor
and will be used quite rarely. Allow compiling it out.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit af99da74333b ("powerpc/sstep: Support VSX vector paired storage
access instructions") added loading and storing 32 word long data into
adjacent VSRs. However the calculation used to determine if two VSRs
needed to be loaded/stored inadvertently prevented the load/storing
taking place for instructions with a data length less than 16 words.
This causes the emulation to not function correctly, which can be seen
by the alignment_handler selftest:
$ ./alignment_handler
[snip]
test: test_alignment_handler_vsx_207
tags: git_version:powerpc-5.12-1-0-g82d2c16b350f
VSX: 2.07B
Doing lxsspx: PASSED
Doing lxsiwax: FAILED: Wrong Data
Doing lxsiwzx: PASSED
Doing stxsspx: PASSED
Doing stxsiwx: PASSED
failure: test_alignment_handler_vsx_207
test: test_alignment_handler_vsx_300
tags: git_version:powerpc-5.12-1-0-g82d2c16b350f
VSX: 3.00B
Doing lxsd: PASSED
Doing lxsibzx: PASSED
Doing lxsihzx: PASSED
Doing lxssp: FAILED: Wrong Data
Doing lxv: PASSED
Doing lxvb16x: PASSED
Doing lxvh8x: PASSED
Doing lxvx: PASSED
Doing lxvwsx: FAILED: Wrong Data
Doing lxvl: PASSED
Doing lxvll: PASSED
Doing stxsd: PASSED
Doing stxsibx: PASSED
Doing stxsihx: PASSED
Doing stxssp: PASSED
Doing stxv: PASSED
Doing stxvb16x: PASSED
Doing stxvh8x: PASSED
Doing stxvx: PASSED
Doing stxvl: PASSED
Doing stxvll: PASSED
failure: test_alignment_handler_vsx_300
[snip]
Fix this by making sure all VSX instruction emulation correctly
load/store from the VSRs.
Fixes: af99da74333b ("powerpc/sstep: Support VSX vector paired storage access instructions")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225031946.1458206-1-jniethe5@gmail.com
|
|
Running "perf mem record" in powerpc platforms with selinux enabled
resulted in soft lockup's. Below call-trace was seen in the logs:
CPU: 58 PID: 3751 Comm: sssd_nss Not tainted 5.11.0-rc7+ #2
NIP: c000000000dff3d4 LR: c000000000dff3d0 CTR: 0000000000000000
REGS: c000007fffab7d60 TRAP: 0100 Not tainted (5.11.0-rc7+)
...
NIP _raw_spin_lock_irqsave+0x94/0x120
LR _raw_spin_lock_irqsave+0x90/0x120
Call Trace:
0xc00000000fd47260 (unreliable)
skb_queue_tail+0x3c/0x90
audit_log_end+0x6c/0x180
common_lsm_audit+0xb0/0xe0
slow_avc_audit+0xa4/0x110
avc_has_perm+0x1c4/0x260
selinux_perf_event_open+0x74/0xd0
security_perf_event_open+0x68/0xc0
record_and_restart+0x6e8/0x7f0
perf_event_interrupt+0x22c/0x560
performance_monitor_exception0x4c/0x60
performance_monitor_common_virt+0x1c8/0x1d0
interrupt: f00 at _raw_spin_lock_irqsave+0x38/0x120
NIP: c000000000dff378 LR: c000000000b5fbbc CTR: c0000000007d47f0
REGS: c00000000fd47860 TRAP: 0f00 Not tainted (5.11.0-rc7+)
...
NIP _raw_spin_lock_irqsave+0x38/0x120
LR skb_queue_tail+0x3c/0x90
interrupt: f00
0x38 (unreliable)
0xc00000000aae6200
audit_log_end+0x6c/0x180
audit_log_exit+0x344/0xf80
__audit_syscall_exit+0x2c0/0x320
do_syscall_trace_leave+0x148/0x200
syscall_exit_prepare+0x324/0x390
system_call_common+0xfc/0x27c
The above trace shows that while the CPU was handling a performance
monitor exception, there was a call to security_perf_event_open()
function. In powerpc core-book3s, this function is called from
perf_allow_kernel() check during recording of data address in the
sample via perf_get_data_addr().
Commit da97e18458fb ("perf_event: Add support for LSM and SELinux
checks") introduced security enhancements to perf. As part of this
commit, the new security hook for perf_event_open() was added in all
places where perf paranoid check was previously used. In powerpc
core-book3s code, originally had paranoid checks in
perf_get_data_addr() and power_pmu_bhrb_read(). So
perf_paranoid_kernel() checks were replaced with perf_allow_kernel()
in these PMU helper functions as well.
The intention of paranoid checks in core-book3s was to verify
privilege access before capturing some of the sample data. Along with
paranoid checks, perf_allow_kernel() also does a
security_perf_event_open(). Since these functions are accessed while
recording a sample, we end up calling selinux_perf_event_open() in PMI
context. Some of the security functions use spinlock like
sidtab_sid2str_put(). If a perf interrupt hits under a spin lock and
if we end up in calling selinux hook functions in PMI handler, this
could cause a dead lock.
Since the purpose of this security hook is to control access to
perf_event_open(), it is not right to call this in interrupt context.
The paranoid checks in powerpc core-book3s were done at interrupt time
which is also not correct.
Reference commits:
Commit cd1231d7035f ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()")
Commit bb19af816025 ("powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer")
We only allow creation of events that have already passed the
privilege checks in perf_event_open(). So these paranoid checks are
not needed at event time. As a fix, patch uses
'event->attr.exclude_kernel' check to prevent exposing kernel address
for userspace only sampling.
Fixes: cd1231d7035f ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()")
Cc: stable@vger.kernel.org # v4.17+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1614247839-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com
|