| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
"Minor patches from various people"
* tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Output host build info as normal Windows version number
hv_balloon: rate-limit "Unhandled message" warning
drivers: hv: log when enabling crash_kexec_post_notifiers
hv_utils: Add comment about max VMbus packet size in VSS driver
Drivers: hv: Compare cpumasks and not their weights in init_vp_index()
Drivers: hv: Rename 'alloced' to 'allocated'
Drivers: hv: vmbus: Use struct_size() helper in kmalloc()
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
|
|
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"SoC specific code is generally used for older platforms that don't
(yet) use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire"
* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: remove support for NOMMU ARMv4/v5
ARM: PXA: fix up decompressor code
soc: microchip: make mpfs_sys_controller_put static
ARM: pxa: remove Intel Imote2 and Stargate 2 boards
ARM: mmp: Fix failure to remove sram device
ARM: mstar: Select ARM_ERRATA_814220
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Remove feature bit accessors
net: ixp4xx_hss: Check features using syscon
net: ixp4xx_eth: Drop platform data support
soc: ixp4xx-npe: Access syscon regs using regmap
soc: ixp4xx: Add features from regmap helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"Various updates for the 32-bit and 64-bit defconfig files, mostly to
enable additional hardware drivers for more machines, specifically for
the Allwinner F1C100, Altera SoCFPGA, Broadcom, Microchip, Qualcomm,
Airoha, Tegra, Renesas, and i.NX.
The multi_v5_defconfig for older ARMv5 configs gets a rework for Andre
Przywara to cleans up the multi_v5_defconfig for some cruft that has
accumulated and drivers that got disabled unintentionally, while
Anders Roxell makes it more useful for running under Qemu"
* tag 'arm-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
ARM: configs: multi_v5: Enable Allwinner F1C100
ARM: configs: clean up multi_v5_defconfig
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS
ARM: configs: multi_v5_defconfig: remove deleted platforms
ARM: defconfig: add SMB347 charger driver for p4note
arm: multi_v5: enable configs for versatile
arm64: defconfig: enable Layerscape SFP driver
ARM: configs: at91: sama7: Unselect CONFIG_DMATEST
ARM: configs: at91: add eic
arm64: defconfig: enable the CVP driver
ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
ARM: multi_v7_defconfig: Enable BCM23550 and BCM53573
ARM: multi_v7_defconfig: Enable Broadcom STB USB drivers
ARM: configs: at91: sama7: add config for cpufreq
ARM: configs: at91: sama7: enable cpu idle
ARM: configs: at91: sama7: Enable crypto IPs and software algs
ARM: configs: at91: sama7: Enable UBIFS_FS
ARM: configs: at91: sama7: Enable NAND / SMC
arm64: defconfig: tegra: Enable GPCDMA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
|
|
Pull ARM updates from Russell King:
"Updates for IRQ stacks and virtually mapped stack support, and ftrace:
- Support for IRQ and vmap'ed stacks
This covers all the work related to implementing IRQ stacks and
vmap'ed stacks for all 32-bit ARM systems that are currently
supported by the Linux kernel, including RiscPC and Footbridge. It
has been submitted for review in four different waves:
- IRQ stacks support for v7 SMP systems [0]
- vmap'ed stacks support for v7 SMP systems[1]
- extending support for both IRQ stacks and vmap'ed stacks for all
remaining configurations, including v6/v7 SMP multiplatform
kernels and uniprocessor configurations including v7-M [2]
- fixes and updates in [3]
- ftrace fixes and cleanups
Make all flavors of ftrace available on all builds, regardless of
ISA choice, unwinder choice or compiler [4]:
- use ADD not POP where possible
- fix a couple of Thumb2 related issues
- enable HAVE_FUNCTION_GRAPH_FP_TEST for robustness
- enable the graph tracer with the EABI unwinder
- avoid clobbering frame pointer registers to make Clang happy
- Fixes for the above"
[0] https://lore.kernel.org/linux-arm-kernel/20211115084732.3704393-1-ardb@kernel.org/
[1] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-1-ardb@kernel.org/
[2] https://lore.kernel.org/linux-arm-kernel/20211206164659.1495084-1-ardb@kernel.org/
[3] https://lore.kernel.org/linux-arm-kernel/20220124174744.1054712-1-ardb@kernel.org/
[4] https://lore.kernel.org/linux-arm-kernel/20220203082204.1176734-1-ardb@kernel.org/
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (62 commits)
ARM: fix building NOMMU ARMv4/v5 kernels
ARM: unwind: only permit stack switch when unwinding call_with_stack()
ARM: Revert "unwind: dump exception stack from calling frame"
ARM: entry: fix unwinder problems caused by IRQ stacks
ARM: unwind: set frame.pc correctly for current-thread unwinding
ARM: 9184/1: return_address: disable again for CONFIG_ARM_UNWIND=y
ARM: 9183/1: unwind: avoid spurious warnings on bogus code addresses
Revert "ARM: 9144/1: forbid ftrace with clang and thumb2_kernel"
ARM: mach-bcm: disable ftrace in SMC invocation routines
ARM: cacheflush: avoid clobbering the frame pointer
ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds
ARM: ftrace: enable the graph tracer with the EABI unwinder
ARM: unwind: track location of LR value in stack frame
ARM: ftrace: enable HAVE_FUNCTION_GRAPH_FP_TEST
ARM: ftrace: avoid unnecessary literal loads
ARM: ftrace: avoid redundant loads or clobbering IP
ARM: ftrace: use trampolines to keep .init.text in branching range
ARM: ftrace: use ADD not POP to counter PUSH at entry
ARM: ftrace: ensure that ADR takes the Thumb bit into account
ARM: make get_current() and __my_cpu_offset() __always_inline
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A few fixes, nothing too exciting.
Fix warnings when building for dragen2 targets (sparse and
"screen_bits") and ucsimm targets. Fix compilation problems when test
compiling for ColdFire targets with the mcf_edma driver enabled.
Remove an incorrect clock definition for the ColdFire m5441x.
Summary:
- fix 'screen_bits' defined but not used
- fix ucsimm sparse warnings
- fix dragen2 warnings
- fix test builds with the mcf_edma driver enabled"
* tag 'm68knommu-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined
m68k: m5441x: remove erroneous clock disable
m68knommu: fix ucsimm sparse warnings
m68knommu: fix 'screen_bits' defined but not used
m68knommu: fix warning: no previous prototype for 'init_dragen2'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Lots of small fixes and code cleanups across most of the fbdev
drivers.
This includes conversions to use helper functions, const conversions,
spelling fixes, help text updates, adding return value checks, small
build fixes, and much more"
* tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (59 commits)
video: fbdev: kyro: make read-only array ODValues static const
video: fbdev: offb: fix warning comparing pointer to 0
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
video: fbdev: sm712fb: Fix crash in smtcfb_write()
video: fbdev: s3c-fb: fix platform_get_irq.cocci warning
video: fbdev: sm712fb: Fix crash in smtcfb_read()
video: fbdev: via: check the return value of kstrdup()
video: fbdev: au1100fb: Spelling s/palette/palette/
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
video: fbdev: atari: Remove unused atafb_setcolreg()
video: fbdev: atari: Convert to standard round_up() helper
video: fbdev: atari: Fix TT High video mode
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: Use sysfs_emit() instead of snprintf()
video: fbdev: s3c-fb: Use platform_get_irq() to get the interrupt
video: fbdev: Fix wrong file path for pvr2fb.c in Kconfig help text
video: fbdev: pxa3xx-gcu: Remove unnecessary print function dev_err()
video: fbdev: pxa168fb: Remove unnecessary print function dev_err()
...
|
|
The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are
currently not selected by any defconfig. sunxi_defconfig only covers the
v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image.
Add the required symbols to multi_v5_defconfig, to give people some sane
default config when playing around with this chip. This is probably more
important as there are surely not many distros out there supporting
ARMv5 out of the box.
This allows my LicheePi Nano board to boot to a busybox prompt.
The zImage size grows by about 50 KB, in detail:
text data bss dec hex filename
10510000 4400700 687740 15598440 ee0368 vmlinux-old
10588592 4469096 686812 15744500 f03df4 vmlinux-new
14922908 arch/arm/boot/Image-old
15067388 arch/arm/boot/Image-new
6388016 arch/arm/boot/zImage-old
6440064 arch/arm/boot/zImage-new
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
Merge updates from Andrew Morton:
- A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs
- Most the MM patches which precede the patches in Willy's tree: kasan,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb,
userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp,
cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap,
zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (227 commits)
mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release()
Docs/ABI/testing: add DAMON sysfs interface ABI document
Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
selftests/damon: add a test for DAMON sysfs interface
mm/damon/sysfs: support DAMOS stats
mm/damon/sysfs: support DAMOS watermarks
mm/damon/sysfs: support schemes prioritization
mm/damon/sysfs: support DAMOS quotas
mm/damon/sysfs: support DAMON-based Operation Schemes
mm/damon/sysfs: support the physical address space monitoring
mm/damon/sysfs: link DAMON for virtual address spaces monitoring
mm/damon: implement a minimal stub for sysfs-based DAMON interface
mm/damon/core: add number of each enum type values
mm/damon/core: allow non-exclusive DAMON start/stop
Docs/damon: update outdated term 'regions update interval'
Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling
Docs/vm/damon: call low level monitoring primitives the operations
mm/damon: remove unnecessary CONFIG_DAMON option
mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}()
mm/damon/dbgfs-test: fix is_target_id() change
...
|
|
node_dev_init()
... and call node_dev_init() after memory_dev_init() from driver_init(),
so before any of the existing arch/subsys calls. All online nodes should
be known at that point: early during boot, arch code determines node and
zone ranges and sets the relevant nodes online; usually this happens in
setup_arch().
This is in line with memory_dev_init(), which initializes the memory
device subsystem and creates all memory block devices.
Similar to memory_dev_init(), panic() if anything goes wrong, we don't
want to continue with such basic initialization errors.
The important part is that node_dev_init() gets called after
memory_dev_init() and after cpu_dev_init(), but before any of the relevant
archs call register_cpu() to register the new cpu device under the node
device. The latter should be the case for the current users of
topology_init().
Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64)
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prior to "mm: handle uninitialized numa nodes gracefully" memory hotplug
used to allocate pgdat when memory has been added to a node
(hotadd_init_pgdat) arch_free_nodedata has been only used in the failure
path because once the pgdat is exported (to be visible by NODA_DATA(nid))
it cannot really be freed because there is no synchronization available
for that.
pgdat is allocated for each possible nodes now so the memory hotplug
doesn't need to do the ever use arch_free_nodedata so drop it.
This patch doesn't introduce any functional change.
Link: https://lkml.kernel.org/r/20220127085305.20890-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have had several reports [1][2][3] that page allocator blows up when an
allocation from a possible node is requested. The underlying reason is
that NODE_DATA for the specific node is not allocated.
NUMA specific initialization is arch specific and it can vary a lot. E.g.
x86 tries to initialize all nodes that have some cpu affinity (see
init_cpu_to_node) but this can be insufficient because the node might be
cpuless for example.
One way to address this problem would be to check for !node_online nodes
when trying to get a zonelist and silently fall back to another node.
That is unfortunately adding a branch into allocator hot path and it
doesn't handle any other potential NODE_DATA users.
This patch takes a different approach (following a lead of [3]) and it pre
allocates pgdat for all possible nodes in an arch indipendent code -
free_area_init. All uninitialized nodes are treated as memoryless nodes.
node_state of the node is not changed because that would lead to other
side effects - e.g. sysfs representation of such a node and from past
discussions [4] it is known that some tools might have problems digesting
that.
Newly allocated pgdat only gets a minimal initialization and the rest of
the work is expected to be done by the memory hotplug - hotadd_new_pgdat
(renamed to hotadd_init_pgdat).
generic_alloc_nodedata is changed to use the memblock allocator because
neither page nor slab allocators are available at the stage when all
pgdats are allocated. Hotplug doesn't allocate pgdat anymore so we can
use the early boot allocator. The only arch specific implementation is
ia64 and that is changed to use the early allocator as well.
[1] http://lkml.kernel.org/r/20211101201312.11589-1-amakhalov@vmware.com
[2] http://lkml.kernel.org/r/20211207224013.880775-1-npache@redhat.com
[3] http://lkml.kernel.org/r/20190114082416.30939-1-mhocko@kernel.org
[4] http://lkml.kernel.org/r/20200428093836.27190-1-srikar@linux.vnet.ibm.com
[akpm@linux-foundation.org: replace comment, per Mike]
Link: https://lkml.kernel.org/r/Yfe7RBeLCijnWBON@dhcp22.suse.cz
Reported-by: Alexey Makhalov <amakhalov@vmware.com>
Tested-by: Alexey Makhalov <amakhalov@vmware.com>
Reported-by: Nico Pache <npache@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Tested-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_MEMORY_HOTPLUG
Patch series "mm, memory_hotplug: handle unitialized numa node gracefully".
The core of the fix is patch 2 which also links existing bug reports. The
high level goal is to have all possible numa nodes have their pgdat
allocated and initialized so
for_each_possible_node(nid)
NODE_DATA(nid)
will never return garbage. This has proven to be problem in several
places when an offline numa node is used for an allocation just to realize
that node_data and therefore allocation fallback zonelists are not
initialized and such an allocation request blows up.
There were attempts to address that by checking node_online in several
places including the page allocator. This patchset approaches the problem
from a different perspective and instead of special casing, which just
adds a runtime overhead, it allocates pglist_data for each possible node.
This can add some memory overhead for platforms with high number of
possible nodes if they do not contain any memory. This should be a rather
rare configuration though.
How to test this? David has provided and excellent howto:
http://lkml.kernel.org/r/6e5ebc19-890c-b6dd-1924-9f25c441010d@redhat.com
Patches 1 and 3-6 are mostly cleanups. The patchset has been reviewed by
Rafael (thanks!) and the core fix tested by Rafael and Alexey (thanks to
both). David has tested as per instructions above and hasn't found any
fallouts in the memory hotplug scenarios.
This patch (of 6):
This is a preparatory patch and it doesn't introduce any functional
change. It merely pulls out arch_alloc_nodedata (and co) outside of
CONFIG_MEMORY_HOTPLUG because the following patch will need to call this
from the generic MM code.
Link: https://lkml.kernel.org/r/20220127085305.20890-1-mhocko@kernel.org
Link: https://lkml.kernel.org/r/20220127085305.20890-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With commit a4e92ce8e4c8 ("powerpc/fadump: Reservationless firmware
assisted dump"), Linux kernel's Contiguous Memory Allocator (CMA) based
reservation was introduced in fadump. That change was aimed at using CMA
to let applications utilize the memory reserved for fadump while blocking
it from being used for kernel pages. The assumption was, even if CMA
activation fails for whatever reason, the memory still remains reserved to
avoid it from being used for kernel pages. But commit 072355c1cf2d
("mm/cma: expose all pages to the buddy if activation of an area fails")
breaks this assumption as it started exposing all pages to buddy allocator
on CMA activation failure. It led to warning messages like below while
running crash-utility on vmcore of a kernel having above two commits:
crash: seek error: kernel virtual address: <from reserved region>
To fix this problem, opt out from exposing pages to buddy allocator on CMA
activation failure for fadump reserved memory.
Link: https://lkml.kernel.org/r/20220117075246.36072-3-hbathini@linux.ibm.com
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ARCH_WANT_GENERAL_HUGETLB config has duplicate definitions on platforms
that subscribe it. Instead make it a generic config option which can be
selected on applicable platforms when required.
Link: https://lkml.kernel.org/r/1643718465-4324-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the hwpoison page meets the filter conditions, it should not be
regarded as successful memory_failure() processing for mce handler, but
should return a distinct value, otherwise mce handler regards the error
page has been identified and isolated, which may lead to calling
set_mce_nospec() to change page attribute, etc.
Here memory_failure() return -EOPNOTSUPP to indicate that the error
event is filtered, mce handler should not take any action for this
situation and hwpoison injector should treat as correct.
Link: https://lkml.kernel.org/r/20220223082135.2769649-1-luofei@unicloud.com
Signed-off-by: luofei <luofei@unicloud.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On x86, prior to ("mm: handle uninitialized numa nodes gracecully"), NUMA
nodes could be allocated at three different places.
- numa_register_memblks
- init_cpu_to_node
- init_gi_nodes
All these calls happen at setup_arch, and have the following order:
setup_arch
...
x86_numa_init
numa_init
numa_register_memblks
...
init_cpu_to_node
init_memory_less_node
alloc_node_data
free_area_init_memoryless_node
init_gi_nodes
init_memory_less_node
alloc_node_data
free_area_init_memoryless_node
numa_register_memblks() is only interested in those nodes which have
memory, so it skips over any memoryless node it founds. Later on, when
we have read ACPI's SRAT table, we call init_cpu_to_node() and
init_gi_nodes(), which initialize any memoryless node we might have that
have either CPU or Initiator affinity, meaning we allocate pg_data_t
struct for them and we mark them as ONLINE.
So far so good, but the thing is that after ("mm: handle uninitialized
numa nodes gracefully"), we allocate all possible NUMA nodes in
free_area_init(), meaning we have a picture like the following:
setup_arch
x86_numa_init
numa_init
numa_register_memblks <-- allocate non-memoryless node
x86_init.paging.pagetable_init
...
free_area_init
free_area_init_memoryless <-- allocate memoryless node
init_cpu_to_node
alloc_node_data <-- allocate memoryless node with CPU
free_area_init_memoryless_node
init_gi_nodes
alloc_node_data <-- allocate memoryless node with Initiator
free_area_init_memoryless_node
free_area_init() already allocates all possible NUMA nodes, but
init_cpu_to_node() and init_gi_nodes() are clueless about that, so they
go ahead and allocate a new pg_data_t struct without checking anything,
meaning we end up allocating twice.
It should be mad clear that this only happens in the case where
memoryless NUMA node happens to have a CPU/Initiator affinity.
So get rid of init_memory_less_node() and just set the node online.
Note that setting the node online is needed, otherwise we choke down the
chain when bringup_nonboot_cpus() ends up calling
__try_online_node()->register_one_node()->... and we blow up in
bus_add_device(). As can be seen here:
BUG: kernel NULL pointer dereference, address: 0000000000000060
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4-1-default+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/4
RIP: 0010:bus_add_device+0x5a/0x140
Code: 8b 74 24 20 48 89 df e8 84 96 ff ff 85 c0 89 c5 75 38 48 8b 53 50 48 85 d2 0f 84 bb 00 004
RSP: 0000:ffffc9000022bd10 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888100987400 RCX: ffff8881003e4e19
RDX: ffff8881009a5e00 RSI: ffff888100987400 RDI: ffff888100987400
RBP: 0000000000000000 R08: ffff8881003e4e18 R09: ffff8881003e4c98
R10: 0000000000000000 R11: ffff888100402bc0 R12: ffffffff822ceba0
R13: 0000000000000000 R14: ffff888100987400 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88853fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 000000000200a001 CR4: 00000000001706b0
Call Trace:
device_add+0x4c0/0x910
__register_one_node+0x97/0x2d0
__try_online_node+0x85/0xc0
try_online_node+0x25/0x40
cpu_up+0x4f/0x100
bringup_nonboot_cpus+0x4f/0x60
smp_init+0x26/0x79
kernel_init_freeable+0x130/0x2f1
kernel_init+0x17/0x150
ret_from_fork+0x22/0x30
The reason is simple, by the time bringup_nonboot_cpus() gets called, we
did not register the node_subsys bus yet, so we crash when
bus_add_device() tries to dereference bus()->p.
The following shows the order of the calls:
kernel_init_freeable
smp_init
bringup_nonboot_cpus
...
bus_add_device() <- we did not register node_subsys yet
do_basic_setup
do_initcalls
postcore_initcall(register_node_type);
register_node_type
subsys_system_register
subsys_register
bus_register <- register node_subsys bus
Why setting the node online saves us then? Well, simply because
__try_online_node() backs off when the node is online, meaning we do not
end up calling register_one_node() in the first place.
This is subtle, broken and deserves a deep analysis and thought about
how to put this into shape, but for now let us have this easy fix for
the leaking memory issue.
[osalvador@suse.de: add comments]
Link: https://lkml.kernel.org/r/20220221142649.3457-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20220218224302.5282-2-osalvador@suse.de
Fixes: da4490c958ad ("mm: handle uninitialized numa nodes gracefully")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: enforce pageblock_order < MAX_ORDER".
Having pageblock_order >= MAX_ORDER seems to be able to happen in corner
cases and some parts of the kernel are not prepared for it.
For example, Aneesh has shown [1] that such kernels can be compiled on
ppc64 with 64k base pages by setting FORCE_MAX_ZONEORDER=8, which will
run into a WARN_ON_ONCE(order >= MAX_ORDER) in comapction code right
during boot.
We can get pageblock_order >= MAX_ORDER when the default hugetlb size is
bigger than the maximum allocation granularity of the buddy, in which
case we are no longer talking about huge pages but instead gigantic
pages.
Having pageblock_order >= MAX_ORDER can only make alloc_contig_range()
of such gigantic pages more likely to succeed.
Reliable use of gigantic pages either requires boot time allcoation or
CMA, no need to overcomplicate some places in the kernel to optimize for
corner cases that are broken in other areas of the kernel.
This patch (of 2):
Let's enforce pageblock_order < MAX_ORDER and simplify.
Especially patch #1 can be regarded a cleanup before:
[PATCH v5 0/6] Use pageblock_order for cma and alloc_contig_range
alignment. [2]
[1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com
[2] https://lkml.kernel.org/r/20220211164135.1803616-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20220214174132.219303-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: John Garry via iommu <iommu@lists.linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Originally the mmu_gathers were removed in commit 1c3951769621 ("mm: now
that all old mmu_gather code is gone, remove the storage"). However,
the openrisc and hexagon architecture were merged around the same time
and mmu_gathers was not removed.
This patch removes them from openrisc, hexagon and nds32:
Noticed while cleaning this warning:
arch/openrisc/mm/init.c:41:1: warning: symbol 'mmu_gathers' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20220205141956.3315419-1-shorne@gmail.com
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Each call into pte_mkhuge() is invariably followed by
arch_make_huge_pte(). Instead arch_make_huge_pte() can accommodate
pte_mkhuge() at the beginning. This updates generic fallback stub for
arch_make_huge_pte() and available platforms definitions. This makes huge
pte creation much cleaner and easier to follow.
Link: https://lkml.kernel.org/r/1643860669-26307-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Changes in this cycle were:
Bitops & cpumask:
- Always inline various generic helpers, to improve code generation,
but also for instrumentation, found by noinstr validation.
- Add a x86-specific cpumask_clear_cpu() helper to improve code
generation
Atomics:
- Fix atomic64_{read_acquire,set_release} fallbacks
Lockdep:
- Fix /proc/lockdep output loop iteration for classes
- Fix /proc/lockdep potential access to invalid memory
- Add Mark Rutland as reviewer for atomic primitives
- Minor cleanups
Jump labels:
- Clean up the code a bit
Misc:
- Add __sched annotations to percpu rwsem primitives
- Enable RT_MUTEXES on PREEMPT_RT by default
- Stray v8086_mode() inlining fix, result of noinstr objtool
validation"
* tag 'locking-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Refactor #ifdef of struct static_key
jump_label: Avoid unneeded casts in STATIC_KEY_INIT_{TRUE,FALSE}
locking/lockdep: Iterate lock_classes directly when reading lockdep files
x86/ptrace: Always inline v8086_mode() for instrumentation
cpumask: Add a x86-specific cpumask_clear_cpu() helper
locking: Enable RT_MUTEXES by default on PREEMPT_RT.
locking/local_lock: Make the empty local_lock_*() function a macro.
atomics: Fix atomic64_{read_acquire,set_release} fallbacks
locking: Add missing __sched attributes
cpumask: Always inline helpers which use bit manipulation functions
asm-generic/bitops: Always inline all bit manipulation helpers
locking/lockdep: Avoid potential access of invalid memory in lock_class
lockdep: Use memset_startat() helper in reinit_class()
MAINTAINERS: add myself as reviewer for atomics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event updates from Ingo Molnar:
- Fix address filtering for Intel/PT,ARM/CoreSight
- Enable Intel/PEBS format 5
- Allow more fixed-function counters for x86
- Intel/PT: Enable not recording Taken-Not-Taken packets
- Add a few branch-types
* tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix the build on !CONFIG_PHYS_ADDR_T_64BIT
perf: Add irq and exception return branch types
perf/x86/intel/uncore: Make uncore_discovery clean for 64 bit addresses
perf/x86/intel/pt: Add a capability and config bit for disabling TNTs
perf/x86/intel/pt: Add a capability and config bit for event tracing
perf/x86/intel: Increase max number of the fixed counters
KVM: x86: use the KVM side max supported fixed counter
perf/x86/intel: Enable PEBS format 5
perf/core: Allow kernel address filter when not filtering the kernel
perf/x86/intel/pt: Fix address filter config for 32-bit kernel
perf/core: Fix address filter parser for multiple filters
x86: Share definition of __is_canonical_address()
perf/x86/intel/pt: Relax address filter validation
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-03-21 v2
We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).
The main changes are:
1) Custom SEC() handling in libbpf, from Andrii.
2) subskeleton support, from Delyan.
3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.
4) Fix net.core.bpf_jit_harden race, from Hou.
5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.
6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.
7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.
8) Enable non-atomic allocations in local storage, from Joanne.
9) Various var_off ptr_to_btf_id fixed, from Kumar.
10) bpf_ima_file_hash helper, from Roberto.
11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
bpftool: Fix a bug in subskeleton code generation
bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
bpf: Fix bpf_prog_pack for multi-node setup
bpf: Fix warning for cast from restricted gfp_t in verifier
bpf, arm: Fix various typos in comments
libbpf: Close fd in bpf_object__reuse_map
bpftool: Fix print error when show bpf map
bpf: Fix kprobe_multi return probe backtrace
Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
bpf: Simplify check in btf_parse_hdr()
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
bpf: Check for NULL return from bpf_get_btf_vmlinux
selftests/bpf: Test skipping stacktrace
bpf: Adjust BPF stack helper functions to accommodate skip > 0
bpf: Select proper size for bpf_prog_pack
...
====================
Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 75caf33eda242e2f34f61e475d666359749ae5ff.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This reverts commit 83acdce6894908337ca82973149d9709d28204d7.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This reverts commit 02752bd99dc2daae05c12f7063bf0632e22b4c1c.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This reverts commit 515a49173b80a4aabcbad9a4fa2a247042378ea1.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull nfsd updates from Chuck Lever:
"New features:
- NFSv3 support in NFSD is now always built
- Added NFSD support for the NFSv4 birth-time file attribute
- Added support for storing and displaying sockaddrs in trace points
- NFSD now recognizes RPC_AUTH_TLS probes
Performance improvements:
- Optimized the svc transport enqueuing mechanism
- Added micro-optimizations for the duplicate reply cache
Notable bug fixes:
- Allocation of the NFSD file cache hash table is more reliable"
* tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits)
nfsd: fix using the correct variable for sizeof()
nfsd: use correct format characters
NFSD: prevent integer overflow on 32 bit systems
NFSD: prevent underflow in nfssvc_decode_writeargs()
fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock.
NFSD: Fix nfsd_breaker_owns_lease() return values
NFSD: Clean up _lm_ operation names
arch: Remove references to CONFIG_NFSD_V3 in the default configs
NFSD: Remove CONFIG_NFSD_V3
nfsd: more robust allocation failure handling in nfsd_file_cache_init
SUNRPC: Teach server to recognize RPC_AUTH_TLS
NFSD: Move svc_serv_ops::svo_function into struct svc_serv
NFSD: Remove svc_serv_ops::svo_module
SUNRPC: Remove svc_shutdown_net()
SUNRPC: Rename svc_close_xprt()
SUNRPC: Rename svc_create_xprt()
SUNRPC: Remove svo_shutdown method
SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt()
SUNRPC: Remove the .svo_enqueue_xprt method
SUNRPC: Record endpoint information in trace log
...
|
|
Add <asm/paravirt_api_clock.h> for arch/arm/, mapped to <asm/paravirt.h>,
to simplify #ifdeffery in generic code.
Fixes this build error introduced by the scheduler tree:
In file included from ../kernel/sched/core.c:81:
../kernel/sched/sched.h:87:11: fatal error: asm/paravirt_api_clock.h: No such file or directory
87 | # include <asm/paravirt_api_clock.h>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 4ff8f2ca6ccd ("sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20220316204146.14000-1-rdunlap@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull bounds fixes from Kees Cook:
"These are a handful of buffer and array bounds fixes that I've been
carrying in preparation for the coming memcpy improvements and the
enabling of '-Warray-bounds' globally.
There are additional similar fixes in other maintainer's trees, but
these ended up getting carried by me. :)"
* tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
media: omap3isp: Use struct_group() for memcpy() region
tpm: vtpm_proxy: Check length to avoid compiler warning
alpha: Silence -Warray-bounds warnings
m68k: cmpxchg: Dereference matching size
intel_th: msu: Use memset_startat() for clearing hw header
KVM: x86: Replace memset() "optimization" with normal per-field writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"These changes come in roughly two halves: support of Gustavo A. R.
Silva's struct_size() work via additional helpers for catching
overflow allocation size calculations, and conversions of selftests to
KUnit (which includes some tweaks for UML + Clang):
- Convert overflow selftest to KUnit
- Convert stackinit selftest to KUnit
- Implement size_t saturating arithmetic helpers
- Allow struct_size() to be used in initializers"
* tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: stackinit: Convert to KUnit
um: Allow builds with Clang
lib: overflow: Convert to Kunit
overflow: Provide constant expression struct_size
overflow: Implement size_t saturating arithmetic helpers
test_overflow: Regularize test reporting output
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Add arm64 Shadow Call Stack support for GCC 12 (Dan Li)
- Avoid memset with stack offset randomization under Clang (Marco
Elver)
- Clean up stackleak plugin to play nice with .noinstr (Kees Cook)
- Check stack depth for greater usercopy hardening coverage (Kees Cook)
* tag 'hardening-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: Add gcc Shadow Call Stack support
m68k: Implement "current_stack_pointer"
xtensa: Implement "current_stack_pointer"
usercopy: Check valid lifetime via stack depth
stack: Constrain and fix stack offset randomization with Clang builds
stack: Introduce CONFIG_RANDOMIZE_KSTACK_OFFSET
gcc-plugins/stackleak: Ignore .noinstr.text and .entry.text
gcc-plugins/stackleak: Exactly match strings instead of prefixes
gcc-plugins/stackleak: Provide verbose mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Execve and binfmt updates.
Eric and I have stepped up to be the active maintainers of this area,
so here's our first collection. The bulk of the work was in coredump
handling fixes; additional details are noted below:
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey
Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann
Horn)
- Don't write past end of notes for regset gap in coredump (Rick
Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)"
* tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Don't write past end of notes for regset gap
a.out: Stop building a.out/osf1 support on alpha and m68k
coredump: Don't compile flat_core_dump when coredumps are disabled
coredump: Use the vma snapshot in fill_files_note
coredump/elf: Pass coredump_params into fill_note_info
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump: Snapshot the vmas in do_coredump
coredump: Move definition of struct coredump_params into coredump.h
binfmt_elf: Introduce KUnit test
ELF: Properly redefine PT_GNU_* in terms of PT_LOOS
MAINTAINERS: Update execve entry with more details
exec: cleanup comments
fs/binfmt_elf: Refactor load_elf_binary function
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
binfmt: move more stuff undef CONFIG_COREDUMP
selftests/exec: Test for empty string on NULL argv
exec: Force single empty string when argv is empty
coredump: Also dump first pages of non-executable ELF libraries
ELF: fix overflow in total mapping size calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Texas Instruments TMP464 and TMP468 driver
- Vicor PLI1209BC Digital Supervisor driver
- ASUS EC driver
Improvements to existing drivers:
- adt7x10:
- Convert to use regmap
- convert to use with_info API
- use hwmon_notify_event
- other cleanup
- aquacomputer_d5next:
- Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors:
- Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors:
- Support T_Sensor on Prime X570-Pro
- Deprecate driver (replaced by new driver)
- axi-fan-control:
- Use hwmon_notify_event
- dell-smm:
- Clean up CONFIG_I8K
- disable fan type support for Inspiron 3505
- various other cleanup
- hwmon core:
- Report attribute name with udev events
- Add "label" attribute to ABI,
- Add support for pwm auto channels attribute
- max6639:
- Add regulator support
- lm70:
- Add support for TI TMP125
- lm83:
- Cleanup, convert to use with_info API
- mlxreg-fan:
- Use pwm attribute for setting fan speed low limit
- nct6775:
- Add board ID's for ASUS ROG STRIX Z390/Z490/X570-* / PRIME
X570-P, PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A
- Add support for TSI temperature registers
- occ:
- Add various new sysfs attributes
- pmbus core:
- Handle VIN unit off status
- Add regulator supply into macro
- Add get_error_flags support to regulator ops
- pmbus/adm1275:
- Allow setting sample averaging
- pmbus/lm25066:
- Add regulator support
- pmbus/xdpe12284:
- Add support for xdpe11280
- register as regulator
- powr1220:
- Convert to with_info API
- Add support for Lattice's POWR1014 power manager IC
- sch56xx:
- Cleanup and minor improvements
- sch5627:
- Add pwmX_auto_channels_temp support
- tc654:
- Add thermal_cooling device support"
* tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklist
hwmon: (pmbus) Add Vin unit off handling
hwmon: (scpi-hwmon): Use of_device_get_match_data()
hwmon: (axi-fan-control) Use hwmon_notify_event
hwmon: (vexpress-hwmon) Use of_device_get_match_data()
hwmon: Add driver for Texas Instruments TMP464 and TMP468
dt-bindings: hwmon: add tmp464.yaml
dt-bindings: hwmon: Add sample averaging properties for ADM1275
hwmon: (adm1275) Allow setting sample averaging
hwmon: (xdpe12284) Add regulator support
hwmon: (xdpe12284) Add support for xdpe11280
dt-bindings: trivial-devices: Add xdpe11280
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk 360
hwmon: (sch5627) Add pwmX_auto_channels_temp support
hwmon: (core) Add support for pwm auto channels attribute
hwmon: (lm70) Add ti,tmp125 support
dt-bindings: Add ti,tmp125 temperature sensor binding
hwmon: (pmbus/pli1209bc) Add regulator support
hwmon: (pmbus) Add support for pli1209bc
dt-bindings:trivial-devices: Add pli1209bc
...
|
|
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
|
|
Pull block updates from Jens Axboe:
- BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)
- blk-rq-qos completion fix (Tejun)
- blk-cgroup merge fix (Tejun)
- Add offline error return value to distinguish it from an IO error on
the device (Song)
- IO stats fixes (Zhang, Christoph)
- blkcg refcount fixes (Ming, Yu)
- Fix for indefinite dispatch loop softlockup (Shin'ichiro)
- blk-mq hardware queue management improvements (Ming)
- sbitmap dead code removal (Ming, John)
- Plugging merge improvements (me)
- Show blk-crypto capabilities in sysfs (Eric)
- Multiple delayed queue run improvement (David)
- Block throttling fixes (Ming)
- Start deprecating auto module loading based on dev_t (Christoph)
- bio allocation improvements (Christoph, Chaitanya)
- Get rid of bio_devname (Christoph)
- bio clone improvements (Christoph)
- Block plugging improvements (Christoph)
- Get rid of genhd.h header (Christoph)
- Ensure drivers use appropriate flush helpers (Christoph)
- Refcounting improvements (Christoph)
- Queue initialization and teardown improvements (Ming, Christoph)
- Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
Lukas, Nian, Yang, Eric, Chengming)
* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
block: cancel all throttled bios in del_gendisk()
block: let blkcg_gq grab request queue's refcnt
block: avoid use-after-free on throttle data
block: limit request dispatch loop duration
block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
sr: simplify the local variable initialization in sr_block_open()
block: don't merge across cgroup boundaries if blkcg is enabled
block: fix rq-qos breakage from skipping rq_qos_done_bio()
block: flush plug based on hardware and software queue order
block: ensure plug merging checks the correct queue at least once
block: move rq_qos_exit() into disk_release()
block: do more work in elevator_exit
block: move blk_exit_queue into disk_release
block: move q_usage_counter release into blk_queue_release
block: don't remove hctx debugfs dir from blk_mq_exit_queue
block: move blkcg initialization/destroy into disk allocation/release handler
sr: implement ->free_disk to simplify refcounting
sd: implement ->free_disk to simplify refcounting
sd: delay calling free_opal_dev
sd: call sd_zbc_release_disk before releasing the scsi_device reference
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- hwrng core now credits for low-quality RNG devices.
Algorithms:
- Optimisations for neon aes on arm/arm64.
- Add accelerated crc32_be on arm64.
- Add ffdheXYZ(dh) templates.
- Disallow hmac keys < 112 bits in FIPS mode.
- Add AVX assembly implementation for sm3 on x86.
Drivers:
- Add missing local_bh_disable calls for crypto_engine callback.
- Ensure BH is disabled in crypto_engine callback path.
- Fix zero length DMA mappings in ccree.
- Add synchronization between mailbox accesses in octeontx2.
- Add Xilinx SHA3 driver.
- Add support for the TDES IP available on sama7g5 SoC in atmel"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST
MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list
crypto: dh - Remove the unused function dh_safe_prime_dh_alg()
hwrng: nomadik - Change clk_disable to clk_disable_unprepare
crypto: arm64 - cleanup comments
crypto: qat - fix initialization of pfvf rts_map_msg structures
crypto: qat - fix initialization of pfvf cap_msg structures
crypto: qat - remove unneeded assignment
crypto: qat - disable registration of algorithms
crypto: hisilicon/qm - fix memset during queues clearing
crypto: xilinx: prevent probing on non-xilinx hardware
crypto: marvell/octeontx - Use swap() instead of open coding it
crypto: ccree - Fix use after free in cc_cipher_exit()
crypto: ccp - ccp_dmaengine_unregister release dma channels
crypto: octeontx2 - fix missing unlock
hwrng: cavium - fix NULL but dereferenced coccicheck error
crypto: cavium/nitrox - don't cast parameter in bit operations
crypto: vmx - add missing dependencies
MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver
crypto: xilinx - Add Xilinx SHA3 driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"As far as new functionality is concerned, there is a new thermal
driver for the Intel Hardware Feedback Interface (HFI) along with some
intel-speed-select utility changes to support it. There are also new
DT compatible strings for a couple of platforms, and thermal zones on
some platforms will be registered as HWmon sensors now.
Apart from the above, some drivers are updated (fixes mostly) and
there is a new piece of documentation for the Intel DPTF (Dynamic
Power and Thermal Framework) sysfs interface.
Specifics:
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user space
via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform and
fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's Tsens
driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT binding
(Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt is
optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
interface documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy
Dunlap)"
* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
Documentation: thermal: DPTF Documentation
MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
thermal/drivers/brcmstb_thermal: Interrupt is optional
thermal: tegra-bpmp: Handle errors in BPMP response
drivers/thermal/ti-soc-thermal: Add hwmon support
dt-bindings: thermal: tsens: Add msm8953 compatible
dt-bindings: thermal: Add sm8150 compatible string for LMh
thermal/drivers/qcom/lmh: Add support for sm8150
thermal/drivers/tsens: register thermal zones as hwmon sensors
MAINTAINERS: thermal: samsung: Drop obsolete properties
dt-bindings: thermal: samsung: Convert to dtschema
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: Replace acpi_bus_get_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new functionality perspective, the most significant items
here are the new driver for the 'ARM Generic Diagnostic Dump and
Reset' device, the extension of fine grain fan control in the ACPI fan
driver, and the change making it possible to use CPPC information to
obtain CPU capacity.
There are also a few new quirks, a bunch of fixes, including the
platform-level _OSC handling change to make it actually take the
platform firmware response into account, some code and documentation
cleanups, and a notable update of the ACPI device enumeration
documentation.
Specifics:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration of
devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko)"
* tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
clocksource: acpi_pm: fix return value of __setup handler
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI: tables: Add AGDI to the list of known table signatures
ACPI/APEI: Limit printable size of BERT table data
ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
ACPI: APEI: fix return value of __setup handlers
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
ACPICA: Avoid walking the ACPI Namespace if it is not there
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- add vDSO support (allows us to use non-executable stacks)
- many TLB and cache flush optimizations (by Dave Anglin)
- fix handling of probe non-access faults (by Dave Anglin)
- fix invalidate/flush vmap routines (by Dave Anglin)
- avoid using hardware single-step in kprobes
- enable ARCH_HAS_DEBUG_VM_PGTABLE
- many cleanups in unaligned handlers, e.g. rewrite of existing
assembly code
- always use the self-extracting kernel feature
- big refacturing and code reductions regarding space-register usage in
get_user() and put_user()
- add fillrect() support to stifb graphics driver
* tag 'for-5.18/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (23 commits)
parisc: Fix invalidate/flush vmap routines
parisc: Avoid flushing cache on cache-less machines
parisc: Avoid using hardware single-step in kprobes
parisc: Improve CPU socket and core bootup info text
parisc: Enable ARCH_HAS_DEBUG_VM_PGTABLE
parisc: Avoid calling SMP cache flush functions on cache-less machines
parisc: Increase parisc_cache_flush_threshold setting
parisc/unaligned: Enhance user-space visible output
parisc/unaligned: Rewrite 32-bit inline assembly of emulate_sth()
parisc/unaligned: Rewrite 32-bit inline assembly of emulate_ldd()
parisc/unaligned: Rewrite inline assembly of emulate_ldw()
parisc/unaligned: Rewrite inline assembly of emulate_ldh()
parisc/unaligned: Use EFAULT fixup handler in unaligned handlers
parisc: Reduce code size by optimizing get_current() function calls
parisc: Use constants to encode the space registers like SR_KERNEL
parisc: Use SR_USER and SR_KERNEL in get_user() and put_user()
parisc: Add defines for various space register
parisc: Always use the self-extracting kernel feature
video/fbdev/stifb: Implement the stifb_fillrect() function
parisc: Add vDSO support
...
|
