summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-01-20x86: uaccess: Inhibit speculation past access_ok() in user_access_begin()Will Deacon
Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") makes the access_ok() check part of the user_access_begin() preceding a series of 'unsafe' accesses. This has the desirable effect of ensuring that all 'unsafe' accesses have been range-checked, without having to pick through all of the callsites to verify whether the appropriate checking has been made. However, the consolidated range check does not inhibit speculation, so it is still up to the caller to ensure that they are not susceptible to any speculative side-channel attacks for user addresses that ultimately fail the access_ok() check. This is an oversight, so use __uaccess_begin_nospec() to ensure that speculation is inhibited until the access_ok() check has passed. Reported-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc3. We've plugged a couple of nasty issues involving KASLR-enabled kernels, and removed a redundant #define that was introduced as part of the KHWASAN fixes from akpm at -rc2. - Fix broken kpti page-table rewrite in bizarre KASLR configuration - Fix module loading with KASLR - Remove redundant definition of ARCH_SLAB_MINALIGN" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: kasan, arm64: remove redundant ARCH_SLAB_MINALIGN define arm64: kaslr: ensure randomized quantities are clean to the PoC arm64: kpti: Update arm64_kernel_use_ng_mappings() when forced on
2019-01-20Merge tag 'mips_fixes_5.0_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: - Fix IPI handling for Lantiq SoCs, which was broken by changes made back in v4.12. - Enable OF/DT serial support in ath79_defconfig to give us working serial by default. - Fix 64b builds for the Jazz platform. - Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers to perform DMA again following the major DMA mapping changes made in v4.19. - Disable MSI on Cavium Octeon systems when the pcie_disable command line parameter introduced in v3.3 is used, in order to avoid inadvetently accessing PCIe controller registers despite the command line. - Fix a build failure for Cavium Octeon kernels with kexec enabled, introduced in v4.20. - Fix a regression in the behaviour of semctl/shmctl/msgctl IPC syscalls for kernels including n32 support but not o32 support caused by some cleanup in v3.19. * tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: fix kexec support mips: fix n32 compat_ipc_parse_version Disable MSI also when pcie-octeon.pcie_disable on MIPS: BCM47XX: Setup struct device for the SoC MIPS: jazz: fix 64bit build MIPS: ath79: Enable OF serial ports in the default config MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ MIPS: lantiq: Fix IPI interrupt handling
2019-01-20Merge tag 'devicetree-fixes-for-5.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fix from Rob Herring: "A single build fix for powerpc due to device_node.type removal" * tag 'devicetree-fixes-for-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: powerpc: chrp: Use of_node_is_type to access device_type
2019-01-19powerpc: chrp: Use of_node_is_type to access device_typeRob Herring
Commit 8ce5f8415753 ("of: Remove struct device_node.type pointer") removed struct device_node.type pointer, but the conversion to use of_node_is_type() accessor was missed in chrp_init_IRQ(). Fixes: 8ce5f8415753 ("of: Remove struct device_node.type pointer") Reported-by: kbuild test robot <lkp@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
2019-01-19Merge tag 'powerpc-5.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A couple of weeks of fixes. There's one fix for an oops on Power9 machines with Open CAPI adapters. And a fix for probable memory corruption in some of the new NPU code, caught by smatch though and not seen in the wild. Plus a few other minor fixes. There's one non-fix which is the perf_regs change. That was sent during the merge window but I accidentally only merged the first of two patches in the series. It's been in linux-next so hopefully doesn't conflict with anything in acme's tree. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan" * tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/syscalls: Fix syscall tracing powerpc/pseries: Fix build break due to pnv_npu2_init() powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group() powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool. powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group() powerpc/perf: Update perf_regs structure to include MMCRA
2019-01-19Merge tag 'for-linus-5.0-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - Several fixes for the Xen pvcalls drivers (1 fix for the backend and 8 for the frontend). - A fix for a rather longstanding bug in the Xen sched_clock() interface which led to weird time jumps when migrating the system. - A fix for avoiding accesses to x2apic MSRs in Xen PV guests. * tag 'for-linus-5.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix x86 sched_clock() interface for xen pvcalls-front: fix potential null dereference always clear the X2APIC_ENABLE bit for PV guest pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock xen/pvcalls: remove set but not used variable 'intf' pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read pvcalls-front: don't return error when the ring is full pvcalls-front: properly allocate sk pvcalls-front: don't try to free unallocated rings pvcalls-front: read all data before closing the connection
2019-01-19Merge tag 'acpi-5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix an ACPI initialization ordering issue introduced in the 4.17 time frame and causing functional problems to appear on multiple systems and fix some fallout of the recent change to enable building kernels with ACPI support and without PCI. Specifics: - Restore the ACPI initialization ordering changed implicitly by the module-level AML handling rework during the 4.17 development cycle that caused the EC address space handler based on information from ECDT to be set up before loading AML definition blocks, making it effectively not accessible by AML on some systems that don't work as expected any more (Rafael Wysocki). - Add direct dependencies on PCI to Kconfig in multiple places for code that depends on both ACPI and PCI, but the PCI dependency was implicitly satisfied by the ACPI dependency before, to prevent invalid configurations from being created, for example by randconfig (Sinan Kaya)" * tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: Look for ECDT EC after calling acpi_load_tables() drivers: thermal: int340x_thermal: Make PCI dependency explicit x86/intel/lpss: Make PCI dependency explicit platform/x86: apple-gmux: Make PCI dependency explicit platform/x86: intel_pmc: Make PCI dependency explicit platform/x86: intel_ips: make PCI dependency explicit vga-switcheroo: make PCI dependency explicit ata: pata_acpi: Make PCI dependency explicit ACPI / LPSS: Make PCI dependency explicit
2019-01-17openrisc: remove unneeded code in arch/openrisc/MakefileMasahiro Yamada
- LDFLAGS_vmlinux is cleared by the top Makefile - 'all: vmlinux' is specified by the top Makefile Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-17nds32: remove unneeded code in arch/nds32/MakefileMasahiro Yamada
- scripts/Kbuild.include already defined 'comma' - The top Makefile has 'PHONY += FORCE' - include/asm-*/ was moved to arch/*/include/asm/ a decade ago Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-16xen: Fix x86 sched_clock() interface for xenJuergen Gross
Commit f94c8d11699759 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") broke Xen guest time handling across migration: [ 187.249951] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 187.251137] OOM killer disabled. [ 187.251137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 187.252299] suspending xenstore... [ 187.266987] xen:grant_table: Grant tables using version 1 layout [18446743811.706476] OOM killer enabled. [18446743811.706478] Restarting tasks ... done. [18446743811.720505] Setting capacity to 16777216 Fix that by setting xen_sched_clock_offset at resume time to ensure a monotonic clock value. [boris: replaced pr_info() with pr_info_once() in xen_callback_vector() to avoid printing with incorrect timestamp during resume (as we haven't re-adjusted the clock yet)] Fixes: f94c8d11699759 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") Cc: <stable@vger.kernel.org> # 4.11 Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-01-16ia64: remove redundant 'export AWK'Masahiro Yamada
This is exported by the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-16kbuild: remove unused archmrproperMasahiro Yamada
No one uses archmrproper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-16kasan, arm64: remove redundant ARCH_SLAB_MINALIGN defineAndrey Konovalov
Defining ARCH_SLAB_MINALIGN in arch/arm64/include/asm/cache.h when KASAN is off is not needed, as it is defined in defined in include/linux/slab.h as ifndef. Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-16arm64: kaslr: ensure randomized quantities are clean to the PoCArd Biesheuvel
kaslr_early_init() is called with the kernel mapped at its link time offset, and if it returns with a non-zero offset, the kernel is unmapped and remapped again at the randomized offset. During its execution, kaslr_early_init() also randomizes the base of the module region and of the linear mapping of DRAM, and sets two variables accordingly. However, since these variables are assigned with the caches on, they may get lost during the cache maintenance that occurs when unmapping and remapping the kernel, so ensure that these values are cleaned to the PoC. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-16arm64: kpti: Update arm64_kernel_use_ng_mappings() when forced onJames Morse
Since commit b89d82ef01b3 ("arm64: kpti: Avoid rewriting early page tables when KASLR is enabled"), a kernel built with CONFIG_RANDOMIZE_BASE can decide early whether to use non-global mappings by checking the kaslr_offset(). A kernel built without CONFIG_RANDOMIZE_BASE, instead checks the cpufeature static-key. This leaves a gap where CONFIG_RANDOMIZE_BASE was enabled, no kaslr seed was provided, but kpti was forced on using the cmdline option. When the decision is made late, kpti_install_ng_mappings() will re-write the page tables, but arm64_kernel_use_ng_mappings()'s value does not change as it only tests the cpufeature static-key if CONFIG_RANDOMIZE_BASE is disabled. This function influences PROT_DEFAULT via PTE_MAYBE_NG, and causes pgattr_change_is_safe() to catch nG->G transitions when the unchanged PROT_DEFAULT is used as part of PAGE_KERNEL_RO: [ 1.942255] alternatives: patching kernel code [ 1.998288] ------------[ cut here ]------------ [ 2.000693] kernel BUG at arch/arm64/mm/mmu.c:165! [ 2.019215] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 2.020257] Modules linked in: [ 2.020807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2 #51 [ 2.021917] Hardware name: linux,dummy-virt (DT) [ 2.022790] pstate: 40000005 (nZcv daif -PAN -UAO) [ 2.023742] pc : __create_pgd_mapping+0x508/0x6d0 [ 2.024671] lr : __create_pgd_mapping+0x500/0x6d0 [ 2.058059] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) [ 2.059369] Call trace: [ 2.059845] __create_pgd_mapping+0x508/0x6d0 [ 2.060684] update_mapping_prot+0x48/0xd0 [ 2.061477] mark_linear_text_alias_ro+0xdc/0xe4 [ 2.070502] smp_cpus_done+0x90/0x98 [ 2.071216] smp_init+0x100/0x114 [ 2.071878] kernel_init_freeable+0xd4/0x220 [ 2.072750] kernel_init+0x10/0x100 [ 2.073455] ret_from_fork+0x10/0x18 [ 2.075414] ---[ end trace 3572f3a7782292de ]--- [ 2.076389] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b If arm64_kernel_unmapped_at_el0() is true, arm64_kernel_use_ng_mappings() should also be true. Signed-off-by: James Morse <james.morse@arm.com> CC: Ard Biesheuvel <ard.biesheuvel@linaro.org> CC: John Garry <john.garry@huawei.com> CC: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-15x86/intel/lpss: Make PCI dependency explicitSinan Kaya
After commit 5d32a66541c4 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. LPSS code relies on PCI infrastructure but this dependency has not been called out explicitly yet. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-15powerpc/syscalls: Fix syscall tracingMichael Ellerman
Recently in commit fbf508da7440 ("powerpc: split compat syscall table out from native table") we changed the layout of the system call table. Instead of having two entries for each syscall number, one for the regular entry point and one for the compat entry point, we now have separate tables for regular and compat entry points. This inadvertently broke syscall tracing (CONFIG_FTRACE_SYSCALLS), because our implementation of arch_syscall_addr() knew about the layout of the table (it did nr * 2). We can fix it just by dropping our version of arch_syscall_addr() and using the generic version which does: return (unsigned long)sys_call_table[nr]; Fixes: fbf508da7440 ("powerpc: split compat syscall table out from native table") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-15powerpc/pseries: Fix build break due to pnv_npu2_init()Jason A. Donenfeld
Commit 3be2df00e299 ("powerpc/pseries/npu: Enable platform support") added a call to pnv_npu2_init() in pseries code. This causes a build break if we build with CONFIG_PPC_PSERIES && !CONFIG_PPC_POWERNV: powerpc64le-pc-linux-gnu-ld: arch/powerpc/platforms/pseries/pci.o: in function `pSeries_final_fixup': pci.c:(.init.text+0x1b0): undefined reference to `pnv_npu2_init' This commit therefore wraps that line in an ifdef, so that pseries builds without powernv. Fixes: 3be2df00e299 ("powerpc/pseries/npu: Enable platform support") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> [mpe: Frob change log a bit to blame a different commit] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-14MIPS: OCTEON: fix kexec supportAurelien Jarno
Commit 62cac480f33f ("MIPS: kexec: Make a framework for both jumping and halting on nonboot CPUs") broke the build of the OCTEON platform as the relocated_kexec_smp_wait() is now static and not longer exported in kexec.h. Replace it by kexec_reboot() like it has been done in other places. Fixes: 62cac480f33f ("MIPS: kexec: Make a framework for both jumping and halting on nonboot CPUs") Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Dengcheng Zhu <dzhu@wavecomp.com> Cc: ralf@linux-mips.org Cc: stable@vger.kernel.org # 4.20+
2019-01-14always clear the X2APIC_ENABLE bit for PV guestTalons Lee
Commit e657fcc clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit. Signed-off-by: Talons Lee <xin.li@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-01-14Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A bigger batch than I anticipated this week, for two reasons: - Some fallout on Davinci from board file -> DTB conversion, that also includes a few longer-standing fixes (i.e. not recent regressions). - drivers/reset material that has been in linux-next for a while, but didn't get sent to us until now for a variety of reasons (maintainer out sick, holidays, etc). There's a functional dependency in there such that one platform (Altera's SoCFPGA) won't boot without one of the patches; instead of reverting the patch that got merged, I looked at this set and decided it was small enough that I'll pick it up anyway. If you disagree I can revisit with a smaller set. That being said, there's also a handful of the usual stuff: - Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved memory - Fix for PCIe reset on Macchiatobin (Armada 8K development board, what this email is sent from in fact :) - Enable a few new-merged modules for Amlogic in arm64 defconfig - Error path fixes on Integrator - Build fix for Renesas and Qualcomm - Initialization fix for Renesas RZ/G2E .. plus a few more fixlets" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: integrator: impd1: use struct_size() in devm_kzalloc() qcom-scm: Include <linux/err.h> header gpio: pl061: handle failed allocations ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries arm64: defconfig: enable modules for amlogic s400 sound card reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ...
2019-01-12Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson
fixes Late reset controller changes for v5.0 This adds missing deassert functionality to the ARC HSDK reset driver, fixes some indentation and grammar issues in the kernel docs, adds a helper to count the number of resets on a device for the non-DT case as well, adds an early reset driver for SoCFPGA and simple reset driver support for Stratix10, and generalizes the uniphier USB3 glue layer reset to also cover AHCI. * tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux: reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding reset: socfpga: add an early reset driver for SoCFPGA reset: fix null pointer dereference on dev by dev_name reset: Add reset_control_get_count() reset: Improve reset controller kernel docs ARC: HSDK: improve reset driver Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 5.0 They are all device tree fixes which also worth being in stable: - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing this area and crashing while doing it. - Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based) - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based) * tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'integrator-fixes-armsoc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes Fixes for the Integrator: - Handle failed allocations in the IM/PC bus attachment. - Use struct_size() for allocation. * tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: integrator: impd1: use struct_size() in devm_kzalloc() gpio: pl061: handle failed allocations Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'amlogic-fixes' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic DT fixes for v5.0-rc - arm64: defconfig: enable modules for amlogic s400 sound card * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: defconfig: enable modules for amlogic s400 sound card Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'remove-dma_zalloc_coherent-5.0' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
2019-01-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "Minor fixes for new code, corner cases, and documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed Documentation/virtual/kvm: Update URL for AMD SEV API specification KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range() kvm: sev: Fail KVM_SEV_INIT if already initialized KVM: validate userspace input in kvm_clear_dirty_log_protect() KVM: x86: Fix bit shifting in update_intel_pt_cfg
2019-01-11Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Another handful of arm64 fixes here. Most of the complication comes from improving our kpti code to avoid lengthy pauses (30+ seconds) during boot when we rewrite the page tables. There are also a couple of IORT fixes that came in via Lorenzo. Summary: - Don't error in kexec_file_load if kaslr-seed is missing in device-tree - Fix incorrect argument type passed to iort_match_node_callback() - Fix IORT build failure when CONFIG_IOMMU_API=n - Fix kpti performance regression with new rodata default option - Typo fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: return successfully even if kaslr-seed doesn't exist ACPI/IORT: Fix rc_dma_get_range() arm64: kpti: Avoid rewriting early page tables when KASLR is enabled arm64: asm-prototypes: Fix fat-fingered typo in comment ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
2019-01-11mips: fix n32 compat_ipc_parse_versionArnd Bergmann
While reading through the sysvipc implementation, I noticed that the n32 semctl/shmctl/msgctl system calls behave differently based on whether o32 support is enabled or not: Without o32, the IPC_64 flag passed by user space is rejected but calls without that flag get IPC_64 behavior. As far as I can tell, this was inadvertently changed by a cleanup patch but never noticed by anyone, possibly nobody has tried using sysvipc on n32 after linux-3.19. Change it back to the old behavior now. Fixes: 78aaf956ba3a ("MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # 3.19+
2019-01-11x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is ↵Vitaly Kuznetsov
not backed Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when vmptr address is not backed is wrong, we end up advancing RIP twice. Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page") Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11KVM/VMX: Avoid return error when flush tlb successfully in the ↵Lan Tianyu
hv_remote_flush_tlb_with_range() The "ret" is initialized to be ENOTSUPP. The return value of __hv_remote_flush_tlb_with_range() will be Or with "ret" when ept table potiners are mismatched. This will cause return ENOTSUPP even if flush tlb successfully. This patch is to fix the issue and set "ret" to 0. Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.") Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11kvm: sev: Fail KVM_SEV_INIT if already initializedDavid Rientjes
By code inspection, it was found that multiple calls to KVM_SEV_INIT could deplete asid bits and overwrite kvm_sev_info's regions_list. Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this should likely be fixed anyway. This code is serialized by kvm->lock. Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command") Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11KVM: x86: Fix bit shifting in update_intel_pt_cfgGustavo A. R. Silva
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is being left shifted more than 32 bits, the behavior is undefined. Fix this by adding suffix ULL to integer 0xf. Addresses-Coverity-ID: 1476095 ("Bad bit shift operation") Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL to CONFIG_X86_RESCTRL" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE x86/cache: Rename config option to CONFIG_X86_RESCTRL samples/seccomp: Fix 32-bit build
2019-01-11powerpc/4xx/ocm: Fix fix for phys_addr_t printf warningsMichael Ellerman
My recent commit to fix the printf warnings in ocm.c got the format specifier wrong, because I copied it from the documentation without realising the square brackets are not meant as literals. This results in the address being suffixed with a literal "[p]". Actually tested this time: # cat info /sys/kernel/debug/ppc4xx_ocm PhysAddr : 0x0000000400040000 ... NC.PhysAddr : 0x0000000400040000 ... C.PhysAddr : 0x0000000000000000 Fixes: 52b88fa1e8c7 ("powerpc/4xx/ocm: Fix phys_addr_t printf warnings") Reported-by: Christian Lamparter <chunkeey@gmail.com> Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-11powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()Frederic Barrat
With a recent change around IOMMU group, a system with an opencapi adapter is no longer booting and we get a kernel oops: BUG: Kernel NULL pointer dereference at 0x00000028 Faulting instruction address: 0xc0000000000aa38c ... NIP pnv_try_setup_npu_table_group+0x1c/0x1a0 LR pnv_pci_ioda_fixup+0x1f8/0x660 Call Trace: pnv_try_setup_npu_table_group+0x60/0x pnv_pci_ioda_fixup+0x20c/0x660 pcibios_resource_survey+0x2c8/0x31c pcibios_init+0xb0/0xe4 do_one_initcall+0x64/0x264 kernel_init_freeable+0x36c/0x468 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x68 An opencapi device is using a device PE, so the current code breaks because pe->pbus is not defined. More generally, there's no need to define an IOMMU group for opencapi, as the device sends real addresses directly (admittedly, the virtualization story is yet to be written). So let's fix it by skipping the IOMMU group setup for opencapi PHBs. Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups") Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-11powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEMBreno Leitao
Commit e1c3743e1a20 ("powerpc/tm: Set MSR[TS] just prior to recheckpoint") moved a code block around and this block uses a 'msr' variable outside of the CONFIG_PPC_TRANSACTIONAL_MEM, however the 'msr' variable is declared inside a CONFIG_PPC_TRANSACTIONAL_MEM block, causing a possible error when CONFIG_PPC_TRANSACTION_MEM is not defined. error: 'msr' undeclared (first use in this function) This is not causing a compilation error in the mainline kernel, because 'msr' is being used as an argument of MSR_TM_ACTIVE(), which is defined as the following when CONFIG_PPC_TRANSACTIONAL_MEM is *not* set: #define MSR_TM_ACTIVE(x) 0 This patch just fixes this issue avoiding the 'msr' variable usage outside the CONFIG_PPC_TRANSACTIONAL_MEM block, avoiding trusting in the MSR_TM_ACTIVE() definition. Cc: stable@vger.kernel.org Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Fixes: e1c3743e1a20 ("powerpc/tm: Set MSR[TS] just prior to recheckpoint") Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-11powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.Christophe Leroy
Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") moved the loading of r6 earlier in the code. As some functions are called inbetween, r6 needs to be loaded again with the address of swapper_pg_dir in order to set PTE pointers for the Abatron BDI. Fixes: 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-11powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()Dan Carpenter
There is a typo so we accidentally allocate enough memory for a pointer when we wanted to allocate enough for a struct. Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-11ARM: integrator: impd1: use struct_size() in devm_kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-01-11arm64: kexec_file: return successfully even if kaslr-seed doesn't existAKASHI Takahiro
In kexec_file_load, kaslr-seed property of the current dtb will be deleted any way before setting a new value if possible. It doesn't matter whether it exists in the current dtb. So "ret" should be reset to 0 here. Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10Merge tag 'riscv-for-linus-4.21-rc2-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This tag contains a handful of updates that slipped through the cracks during the merge window due to the holidays. The fixes are mostly independent, with the exception of one larger audit-related branch. Core RISC-V updates: - The BSS has been moved, which shrinks flat images. - A fix to test-bpf so it compiles on RV64I-based systems. - A fix to respect the kernel commandline when there is no device tree. - A fix to prevent CPUs from trying to put themselves to sleep when bringing down the system. - Support for MODULE_SECTIONS on RV32I-based systems. - [new in v2] The addition of an SBI earlycon driver. This is definately a new feature, but I'd like to include it now because I dropped this patch when submitting the merge window PR that removed our EARLY_PRINTK support. RISC-V audit updates: - The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. - The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. - A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS As usual, I've tested this by booting a Fedora-based image on a recent QEMU (this time just whatever I had lying around). * tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: tty/serial: Add RISC-V SBI earlycon support riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig riscv: fix trace_sys_exit hook riscv: define CREATE_TRACE_POINTS in ptrace.c riscv: define NR_syscalls in unistd.h riscv: audit: add audit hook in do_syscall_trace_enter/exit() riscv: add audit support RISC-V: Support MODULE_SECTIONS mechanism on RV32 MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree riscv: don't stop itself in smp_send_stop arch: riscv: support kernel command line forcing when no DTB passed tools uapi: fix RISC-V 64-bit support RISC-V: Make BSS section as the last section in vmlinux.lds.S
2019-01-10Disable MSI also when pcie-octeon.pcie_disable onYunQiang Su
Octeon has an boot-time option to disable pcie. Since MSI depends on PCI-E, we should also disable MSI also with this option is on in order to avoid inadvertently accessing PCIe registers. Signed-off-by: YunQiang Su <ysu@wavecomp.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: pburton@wavecomp.com Cc: linux-mips@vger.kernel.org Cc: aaro.koskinen@iki.fi Cc: stable@vger.kernel.org # v3.3+
2019-01-10arm64: kpti: Avoid rewriting early page tables when KASLR is enabledWill Deacon
A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") is that the linear map is created with page granularity, which means that transitioning the early page table from global to non-global mappings when enabling kpti can take a significant amount of time during boot. Given that most CPU implementations do not require kpti, this mainly impacts KASLR builds where kpti is forcefully enabled. However, in these situations we know early on that non-global mappings are required and can avoid the use of global mappings from the beginning. The only gotcha is Cavium erratum #27456, which we must detect based on the MIDR value of the boot CPU. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10gpio: pl061: handle failed allocationsNicholas Mc Guire
devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-10csky: fixup compile error with CPU 810.Guo Ren
This bug is from commit f553aa1c13cb ("csky: fixup relocation error with 807 & 860"). I forgot to compile with 810 for that patch. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-10ARM: dts: kirkwood: Fix polarity of GPIO fan linesLinus Walleij
These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Julien D'Ascenzio <jdascenzio@posteo.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net> Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: marvell: mcbin: fix PCIe reset signalBaruch Siach
The MPP52 signal is on the seconds GPIO instance of CP0, which corresponds to the &cp0_gpio2 handle. Rename the property name to the standard '-gpios' suffix while at it. Fixes: b83e1669adce6 ("arm64: dts: marvell: mcbin: add support for PCIe") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: marvell: armada-ap806: reserve PSCI areaHeinrich Schuchardt
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from Linux leads to an immediate crash. So let's make the same memory reservation as the vendor kernel. [gregory: added as comment that this region matches the mainline U-boot] Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>