| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of TTY / Serial patches for 5.7-rc1
Lots of console fixups and reworking in here, serial core tweaks
(doesn't that ever get old, why are we still creating new serial
devices?), serial driver updates, line-protocol driver updates, and
some vt cleanups and fixes included in here as well.
All have been in linux-next with no reported issues"
* tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits)
serial: 8250: Optimize irq enable after console write
serial: 8250: Fix rs485 delay after console write
vt: vt_ioctl: fix use-after-free in vt_in_use()
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
tty: serial: make SERIAL_SPRD depend on COMMON_CLK
tty: serial: fsl_lpuart: fix return value checking
tty: serial: fsl_lpuart: move dma_request_chan()
ARM: dts: tango4: Make /serial compatible with ns16550a
ARM: dts: mmp*: Make the serial ports compatible with xscale-uart
ARM: dts: mmp*: Fix serial port names
ARM: dts: mmp2-brownstone: Don't redeclare phandle references
ARM: dts: pxa*: Make the serial ports compatible with xscale-uart
ARM: dts: pxa*: Fix serial port names
ARM: dts: pxa*: Don't redeclare phandle references
serial: omap: drop unused dt-bindings header
serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs
serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA
serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info
serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()
serial: 8250: 8250_omap: Account for data in flight during DMA teardown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Build system:
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
Kconfig:
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
files
- relax the 'imply' behavior so that symbols implied by 'y' can
become 'm'
- make 'imply' obey 'depends on' in order to make 'imply' really weak
Misc:
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups"
* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
Makefile: Update kselftest help information
kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
kbuild: add outputmakefile to no-dot-config-targets
kbuild: remove AS variable
net: wan: wanxl: refactor the firmware rebuild rule
net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
kbuild: add comment about grouped target
kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
kconfig: remove unused variable in qconf.cc
sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
kbuild: refactor Makefile.dtbinst more
kbuild: compute the dtbs_install destination more simply
Makefile: disallow data races on gcc-10 as well
kconfig: make 'imply' obey the direct dependency
kconfig: allow symbols implied by y to become m
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
modpost: rework and consolidate logging interface
kbuild: allow to run dt_binding_check without kernel configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vmware updates from Ingo Molnar:
"The main change in this tree is the addition of 'steal time clock
support' for VMware guests"
* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Use bool type for vmw_sched_clock
x86/vmware: Enable steal time accounting
x86/vmware: Add steal time clock support for VMware guests
x86/vmware: Remove vmware_sched_clock_setup()
x86/vmware: Make vmware_select_hypercall() __init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"A handful of changes:
- two memory encryption related fixes
- don't display the kernel's virtual memory layout plaintext on
32-bit kernels either
- two simplifications"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove the now redundant N_MEMORY check
dma-mapping: Fix dma_pgprot() for unencrypted coherent pages
x86: Don't let pgprot_modify() change the page encryption bit
x86/mm/kmmio: Use this_cpu_ptr() instead get_cpu_var() for kmmio_ctx
x86/mm/init/32: Stop printing the virtual memory layout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Ingo Molnar:
- extend the decoder maps with CET instructions
- fix !vDSO corner cases
* 'x86-misc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/tests: Add CET instructions to the new instructions test
x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault
selftests/x86/vdso: Fix no-vDSO segfaults
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
"Misc changes:
- add a pkey sanity check
- three commits to improve and future-proof xstate/xfeature handling
some more"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Add check for pkey "overflow"
x86/fpu/xstate: Warn when checking alignment of disabled xfeatures
x86/fpu/xstate: Fix XSAVES offsets in setup_xstate_comp()
x86/fpu/xstate: Fix last_good_offset in setup_xstate_features()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"This topic tree contains more commits than usual:
- most of it are uaccess cleanups/reorganization by Al
- there's a bunch of prototype declaration (--Wmissing-prototypes)
cleanups
- misc other cleanups all around the map"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/mm/set_memory: Fix -Wmissing-prototypes warnings
x86/efi: Add a prototype for efi_arch_mem_reserve()
x86/mm: Mark setup_emu2phys_nid() static
x86/jump_label: Move 'inline' keyword placement
x86/platform/uv: Add a missing prototype for uv_bau_message_interrupt()
kill uaccess_try()
x86: unsafe_put-style macro for sigmask
x86: x32_setup_rt_frame(): consolidate uaccess areas
x86: __setup_rt_frame(): consolidate uaccess areas
x86: __setup_frame(): consolidate uaccess areas
x86: setup_sigcontext(): list user_access_{begin,end}() into callers
x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit)
x86: ia32_setup_rt_frame(): consolidate uaccess areas
x86: ia32_setup_frame(): consolidate uaccess areas
x86: ia32_setup_sigcontext(): lift user_access_{begin,end}() into the callers
x86/alternatives: Mark text_poke_loc_init() static
x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()
x86/mm: Drop pud_mknotpresent()
x86: Replace setup_irq() by request_irq()
x86/configs: Slightly reduce defconfigs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
"A handful of updates: two linker script cleanups and a stock
defconfig+allmodconfig bootability fix"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Discard .note.gnu.property sections in vDSO
x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS
x86/Kconfig: Make CMDLINE_OVERRIDE depend on non-empty CMDLINE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc cleanups and small enhancements all around the map"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Fix debug_puthex() parameter type
x86/setup: Fix static memory detection
x86/vmlinux: Drop unneeded linker script discard of .eh_frame
x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
x86/boot/compressed: Remove .eh_frame section from bzImage
x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
x86/boot/compressed/64: Use LEA to initialize boot stack pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
|
|
Pull microblaze updates from Michal Simek:
- convert license headers to SPDX
- cleanup header handling and use asm-generic one
- get rid of earlyprintk residues
- define barriers and use it in the code
- get rid of setup_irq() for timer
- various small addons and fixes
* tag 'microblaze-v5.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Replace setup_irq() by request_irq()
microblaze: Stop printing the virtual memory layout
microblaze: Use asm generic cmpxchg.h for !SMP case
microblaze: Define percpu sestion in linker file
microblaze: Remove unused boot_cpuid variable
microblaze: Add missing irqflags.h header
microblaze: Add sync to tlb operations
microblaze: Define microblaze barrier
microblaze: Remove empty headers
microblaze: Remove early printk setup
microblaze: Remove architecture tlb.h and use generic one
microblaze: Convert headers to SPDX license
microblaze: Fix _reset() function
microblaze: Kernel parameters should be parsed earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 updates from Tony Luck:
"Couple of cleanup patches"
* tag 'please-pull-ia64_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
tty/serial: cleanup after ioc*_serial driver removal
ia64: replace setup_irq() by request_irq()
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- loongson64 irq rework
- dmi support loongson
- replace setup_irq() by request_irq()
- jazz cleanups
- minor cleanups and fixes
* tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits)
MIPS: ralink: mt7621: Fix soc_device introduction
MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC
MAINTAINERS: Update Loongson64 entry
MIPS: Loongson64: Load built-in dtbs
MIPS: Loongson64: Add generic dts
dt-bindings: mips: Add loongson boards
MIPS: Loongson64: Drop legacy IRQ code
dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
irqchip: Add driver for Loongson-3 HyperTransport PIC controller
dt-bindings: interrupt-controller: Add Loongson LIOINTC
irqchip: loongson-liointc: Workaround LPC IRQ Errata
irqchip: Add driver for Loongson I/O Local Interrupt Controller
docs: mips: remove no longer needed au1xxx_ide.rst documentation
MIPS: Alchemy: remove no longer used au1xxx_ide.h header
ide: remove no longer used au1xxx-ide driver
MIPS: Add support for Desktop Management Interface (DMI)
firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
MIPS: ralink: mt7621: introduce 'soc_device' initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- pagetable layout rewrite, to facilitate global READ_ONCE() rework
- Zorro (Amiga) and DIO (HP 9000/300) bus cleanups
- defconfig updates
- minor cleanups and fixes
* tag 'm68k-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (23 commits)
m68k: defconfig: Update defconfigs for v5.6-rc4
zorro: Replace zero-length array with flexible-array member
m68k: Switch to asm-generic/hardirq.h
fbdev: c2p: Use BUILD_BUG() instead of custom solution
dio: Remove unused dio_dev_driver()
dio: Fix dio_bus_match() kerneldoc
dio: Make dio_match_device() static
zorro: Move zorro_bus_type to bus-private header file
zorro: Remove unused zorro_dev_driver()
zorro: Use zorro_match_device() helper in zorro_bus_match()
zorro: Fix zorro_bus_match() kerneldoc
zorro: Make zorro_match_device() static
m68k: Fix Kconfig indentation
m68k: mm: Change ColdFire pgtable_t
m68k: mm: Fully initialize the page-table allocator
m68k: mm: Extend table allocator for multiple sizes
m68k: mm: Use table allocator for pgtables
m68k: mm: Improve kernel_page_table()
m68k: mm: Restructure Motorola MMU page-table layout
m68k: mm: Move the pointer table allocator to motorola.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"A series of commits to make the MSR derived CPU and TSC frequency more
accurate.
It turned out that the frequency tables which have been taken from the
SDM are inaccurate because the SDM provides truncated and rounded
values, e.g. 83.3Mhz (83.3333...) or 116.7Mhz (116.6666...).
This causes time drift in the range of ~1 second per hour (20-30
seconds per day). On some of these SoCs it's not possible to
recalibrate the TSC because there is no reference (PIT, HPET)
available.
With some reverse engineering it was established that the possible
frequencies are derived from the base clock with fixed multiplier /
divider pairs.
For the CPU models which have a known crystal frequency the kernel now
uses multiplier / divider pairs which bring the frequencies closer to
reality and fix the observed time drift issues"
* tag 'x86-timers-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc_msr: Make MSR derived TSC frequency more accurate
x86/tsc_msr: Fix MSR_FSB_FREQ mask for Cherry Trail devices
x86/tsc_msr: Use named struct initializers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Thomas Gleixner:
"Support for 'split lock' detection:
Atomic operations (lock prefixed instructions) which span two cache
lines have to acquire the global bus lock. This is at least 1k cycles
slower than an atomic operation within a cache line and disrupts
performance on other cores. Aside of performance disruption this is a
unpriviledged form of DoS.
Some newer CPUs have the capability to raise an #AC trap when such an
operation is attempted. The detection is by default enabled in warning
mode which will warn once when a user space application is caught. A
command line option allows to disable the detection or to select fatal
mode which will terminate offending applications with SIGBUS"
* tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Avoid runtime reads of the TEST_CTRL MSR
x86/split_lock: Rework the initialization flow of split lock detection
x86/split_lock: Enable split lock detection by kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Thomas Gleixner:
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
* tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS
lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}()
lockdep: Rename trace_softirqs_{on,off}()
lockdep: Rename trace_hardirq_{enter,exit}()
x86/entry: Rename ___preempt_schedule
x86: Remove unneeded includes
x86/entry: Drop asmlinkage from syscalls
x86/entry/32: Enable pt_regs based syscalls
x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments
x86/entry/32: Rename 32-bit specific syscalls
x86/entry/32: Clean up syscall_32.tbl
x86/entry: Remove ABI prefixes from functions in syscall tables
x86/entry/64: Add __SYSCALL_COMMON()
x86/entry: Remove syscall qualifier support
x86/entry/64: Remove ptregs qualifier from syscall table
x86/entry: Move max syscall number calculation to syscallhdr.sh
x86/entry/64: Split X32 syscall table into its own file
x86/entry/64: Move sys_ni_syscall stub to common.c
x86/entry/64: Use syscall wrappers for x32_rt_sigreturn
x86/entry: Refactor SYS_NI macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and timer updates from Thomas Gleixner:
"Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which
is necessary to build the vDSO. These new headers are included from
the kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by
PPC.
- Cleanup and consolidation of the exit related code in posix CPU
timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the
place"
* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
vdso: Fix clocksource.h macro detection
um: Fix header inclusion
arm64: vdso32: Enable Clang Compilation
lib/vdso: Enable common headers
arm: vdso: Enable arm to use common headers
x86/vdso: Enable x86 to use common headers
mips: vdso: Enable mips to use common headers
arm64: vdso32: Include common headers in the vdso library
arm64: vdso: Include common headers in the vdso library
arm64: Introduce asm/vdso/processor.h
arm64: vdso32: Code clean up
linux/elfnote.h: Replace elf.h with UAPI equivalent
scripts: Fix the inclusion order in modpost
common: Introduce processor.h
linux/ktime.h: Extract common header for vDSO
linux/jiffies.h: Extract common header for vDSO
linux/time64.h: Extract common header for vDSO
linux/time32.h: Extract common header for vDSO
linux/time.h: Extract common header for vDSO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ update from Thomas Gleixner:
"Remove TIF_NOHZ from three architectures
These architectures use a static key to decide whether context
tracking needs to be invoked and the TIF_NOHZ flag just causes a
pointless slowpath execution for nothing"
* tag 'timers-nohz-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64: Remove TIF_NOHZ
arm: Remove TIF_NOHZ
x86: Remove TIF_NOHZ
context-tracking: Introduce CONFIG_HAVE_TIF_NOHZ
x86/entry: Remove _TIF_NOHZ from _TIF_WORK_SYSCALL_ENTRY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core SMP updates from Thomas Gleixner:
"CPU (hotplug) updates:
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low
level functions cpu_up/down() are now confined to the core code and
not longer accessible from random code"
* tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()
cpu/hotplug: Hide cpu_up/down()
cpu/hotplug: Move bringup of secondary CPUs out of smp_init()
torture: Replace cpu_up/down() with add/remove_cpu()
firmware: psci: Replace cpu_up/down() with add/remove_cpu()
xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()
parisc: Replace cpu_up/down() with add/remove_cpu()
sparc: Replace cpu_up/down() with add/remove_cpu()
powerpc: Replace cpu_up/down() with add/remove_cpu()
x86/smp: Replace cpu_up/down() with add/remove_cpu()
arm64: hibernate: Use bringup_hibernate_cpu()
cpu/hotplug: Provide bringup_hibernate_cpu()
arm64: Use reboot_cpu instead of hardconding it to 0
arm64: Don't use disable_nonboot_cpus()
ARM: Use reboot_cpu instead of hardcoding it to 0
ARM: Don't use disable_nonboot_cpus()
ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()
cpu/hotplug: Create a new function to shutdown nonboot cpus
cpu/hotplug: Add new {add,remove}_cpu() functions
sched/core: Remove rq.hrtick_csd_pending
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early.
Most cleanup changes come through the various maintainer trees, so
the final removal of setup_irq() is postponed towards the end of
the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and
unsafe interrupt injection including a fixup of the offending
PCI/AER error injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside
of an actual interrupt, can cause inconsistent state on the
fragile x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place"
* tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
unicore32: Replace setup_irq() by request_irq()
sh: Replace setup_irq() by request_irq()
hexagon: Replace setup_irq() by request_irq()
c6x: Replace setup_irq() by request_irq()
alpha: Replace setup_irq() by request_irq()
irqchip/gic-v4.1: Eagerly vmap vPEs
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/stm32: Retrigger both in eoi and unmask callbacks
irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain
irqchip/xilinx: Do not call irq_set_default_host()
irqchip/xilinx: Enable generic irq multi handler
irqchip/xilinx: Fill error code when irq domain registration fails
irqchip/xilinx: Add support for multiple instances
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"The biggest changes in this cycle were the vmlinux.o optimizations by
Peter Zijlstra, which are preparatory and optimization work to run
objtool against the much richer vmlinux.o object file, to perform
new, whole-program section based logic. That work exposed a handful
of problems with the existing code, which fixes and optimizations are
merged here. The complete 'vmlinux.o and noinstr' work is still work
in progress, targeted for v5.8.
There's also assorted fixes and enhancements from Josh Poimboeuf.
In particular I'd like to draw attention to commit 644592d328370,
which turns fatal objtool errors into failed kernel builds. This
behavior is IMO now justified on multiple grounds (it's easy currently
to not notice an essentially corrupted kernel build), and the commit
has been in -next testing for several weeks, but there could still be
build failures with old or weird toolchains. Should that be widespread
or high profile enough then I'd suggest a quick revert, to not hold up
the merge window"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Re-arrange validate_functions()
objtool: Optimize find_rela_by_dest_range()
objtool: Delete cleanup()
objtool: Optimize read_sections()
objtool: Optimize find_symbol_by_name()
objtool: Resize insn_hash
objtool: Rename find_containing_func()
objtool: Optimize find_symbol_*() and read_symbols()
objtool: Optimize find_section_by_name()
objtool: Optimize find_section_by_index()
objtool: Add a statistics mode
objtool: Optimize find_symbol_by_index()
x86/kexec: Make relocate_kernel_64.S objtool clean
x86/kexec: Use RIP relative addressing
objtool: Rename func_for_each_insn_all()
objtool: Rename func_for_each_insn()
objtool: Introduce validate_return()
objtool: Improve call destination function detection
objtool: Fix clang switch table edge case
objtool: Add relocation check for alternative sections
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal
Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some dead
code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu)"
* tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
ACPICA: Update version to 20200214
ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
ACPI: EC: Consolidate event handler installation code
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
acpi/x86: add a kernel parameter to disable ACPI BGRT
x86/acpi: make "asmlinkage" part first thing in the function definition
ACPI: list_for_each_safe() -> list_for_each_entry_safe()
ACPI: video: remove redundant assignments to variable result
ACPI: OSL: Add missing __acquires/__releases annotations
ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
ACPI / AC: Cleanup DMI quirk table
ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
ACPI: EC: Simplify acpi_ec_add()
ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
ACPI: EC: Avoid passing redundant argument to functions
ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These clean up and rework the PM QoS API, address a suspend-to-idle
wakeup regression on some ACPI-based platforms, clean up and extend a
few cpuidle drivers, update multiple cpufreq drivers and cpufreq
documentation, and fix a number of issues in devfreq and several other
things all over.
Specifics:
- Clean up and rework the PM QoS API to simplify the code and reduce
the size of it (Rafael Wysocki).
- Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and
similar platforms where the USB plug/unplug events are handled by
the EC (Rafael Wysocki).
- CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki,
Ulf Hansson).
- Extend the haltpoll cpuidle driver so that it can be forced to run
on some systems where it refused to load (Maciej Szmigiero).
- Convert several cpufreq documents to the .rst format and move the
legacy driver documentation into one common file (Mauro Carvalho
Chehab, Rafael Wysocki).
- Update several cpufreq drivers:
* Extend and fix the imx-cpufreq-dt driver (Anson Huang).
* Improve the -EPROBE_DEFER handling and fix unwanted CPU
overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang,
Christoph Niedermaier).
* Add support for Krait based SoCs to the qcom driver (Ansuel
Smith).
* Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla).
* Add platform specific intermediate callbacks support to
cpufreq-dt and update the imx6q driver (Peng Fan).
* Simplify and consolidate some pieces of the intel_pstate
driver and update its documentation (Rafael Wysocki, Alex
Hung).
- Fix several devfreq issues:
* Remove unneeded extern keyword from a devfreq header file and
use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of
DEVFREQ_GOV_INTERNAL (Chanwoo Choi).
* Fix the handling of dev_pm_qos_remove_request() result
(Leonard Crestez).
* Use constant name for userspace governor (Pierre Kuo).
* Get rid of doc warnings and fix a typo (Christophe JAILLET).
- Use built-in RCU list checking in some places in the PM core to
avoid false-positive RCU usage warnings (Madhuparna Bhowmik).
- Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM
QoS routines (Qian Cai).
- Fix removal of wakeup sources to avoid NULL pointer dereferences in
a corner case (Neeraj Upadhyay).
- Clean up the handling of hibernate compat ioctls and fix the
related documentation (Eric Biggers).
- Update the idle_inject power capping driver to use variable-length
arrays instead of zero-length arrays (Gustavo Silva).
- Fix list format in a PM QoS document (Randy Dunlap).
- Make the cpufreq stats module use scnprintf() to avoid potential
buffer overflows (Takashi Iwai).
- Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus).
- Allow no domain-idle-states DT property in generic PM domains (Ulf
Hansson).
- Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug
Smythies)"
* tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits)
cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()
tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale
ACPI: PM: s2idle: Refine active GPEs check
ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
PM / devfreq: Get rid of some doc warnings
PM / devfreq: Fix handling dev_pm_qos_remove_request result
PM / devfreq: Fix a typo in a comment
PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
PM / devfreq: Remove unneeded extern keyword
PM / devfreq: Use constant name of userspace governor
ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: Use scnprintf() for avoiding potential buffer overflow
cpuidle: psci: Split psci_dt_cpu_init_idle()
PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
PM / hibernate: Remove unnecessary compat ioctl overrides
PM: hibernate: fix docs for ioctls that return loff_t via pointer
Documentation: intel_pstate: update links for references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the big staging and IIO driver pull request for 5.7-rc1.
We again end up deleting more code than we added here, thanks to
finally getting rid of the old and obsolete wireless USB stuff, and
the exfat code (which is coming in again through the vfs tree in a
much cleaner version).
But some code does come back, with the octeon drivers being found to
actually be used in the wild, so those deletions are now reverted.
Other than those major things, just loads and loads of tiny checkpatch
cleanups all over the place, along with new IIO drivers and fixes.
All have been in linux-next with no reported issues"
[ Stephen Rothwell points out some reported issues due to merge conflicts ]
* tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits)
staging: vt6656: Use DIV_ROUND_UP macro instead of specific code
staging: remove hp100 driver
staging: wilc1000: Use crc7 in lib/ rather than a private copy
Staging: rtl8192u: ieee80211: Use netdev_alert().
Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.
Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.
Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.
staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
staging: rtl8723bs: hal: Remove NULL check before kfree
staging: rtl8723bs: hal: Correct typos in comments
staging: rtl8723bs: os_dep: Correct typos in comments
staging: rtl8723bs: core: Correct typos in comments
staging: rtl8723bs: hal: Remove unnecessary cast on void pointer
staging: rtl8188eu: cleanup long line in odm.c
staging: rtl8723bs: hal: Compress return logic
staging: rtl8723bs: rtw_cmd: Compress lines for immediate return
staging: rtl8723bs: rtw_efuse: Compress lines for immediate return
staging: wilc1000: remove label from examples in DT binding documentation
staging: rtl8723bs: Remove blank line before '}' brace
Staging: rtl8188eu: hal: Add space around operators
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and
use of new apis, a libfs fix, a debugfs api change, and some driver
core deferred probe rework.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
Revert "driver core: Set fw_devlink to "permissive" behavior by default"
driver core: Set fw_devlink to "permissive" behavior by default
driver core: Replace open-coded list_last_entry()
driver core: Read atomic counter once in driver_probe_done()
libfs: fix infoleak in simple_attr_read()
driver core: Add device links from fwnode only for the primary device
platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
Input: silead - Switch to firmware_request_platform for retreiving the fw
selftests: firmware: Add firmware_request_platform tests
test_firmware: add support for firmware_request_platform
firmware: Add new platform fallback mechanism and firmware_request_platform()
Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
drivers: base: power: wakeup.c: Use built-in RCU list checking
component: allow missing unbind callback
debugfs: remove return value of debugfs_create_file_size()
debugfs: Check module state before warning in {full/open}_proxy_open()
firmware: fix a double abort case with fw_load_sysfs_fallback
arch_topology: Fix putting invalid cpu clk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY updates from Greg KH:
"Here are the big set of USB and PHY driver patches for 5.7-rc1.
Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
updates, xhci updates, usb-serial driver updates and new device ids,
and other minor things. Full details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits)
USB: cdc-acm: restore capability check order
usb: cdns3: make signed 1 bit bitfields unsigned
usb: gadget: fsl: remove unused variable 'driver_desc'
usb: gadget: f_fs: Fix use after free issue as part of queue failure
usb: typec: Correct the documentation for typec_cable_put()
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
USB: serial: option: add Wistron Neweb D19Q1
USB: serial: option: add BroadMobi BM806U
USB: serial: option: add support for ASKEY WWHC050
usb: core: Add ACPI support for USB interface devices
driver core: platform: Reimplement devm_platform_ioremap_resource
usb: dwc2: convert to devm_platform_get_and_ioremap_resource
usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource
usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource
drivers: provide devm_platform_get_and_ioremap_resource()
phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: imx219
- Support for some new pixelformats
- Support for Sun8i SoC
- Added more codecs to meson vdec driver
- Prepare for removing the legacy usbvision driver by moving it to
staging. This driver has issues and use legacy core APIs. If nobody
steps up to address those, it is time for its retirement.
- Several cleanups and improvements on drivers, with the addition of
new supported boards
* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
media: venus: firmware: Ignore secure call error on first resume
media: mtk-vpu: load vpu firmware from the new location
media: i2c: video-i2c: fix build errors due to 'imply hwmon'
media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
media: hantro: add initial i.MX8MQ support
media: dt-bindings: Document i.MX8MQ VPU bindings
media: vivid: fix incorrect PA assignment to HDMI outputs
media: hantro: Add linux-rockchip mailing list to MAINTAINERS
media: cedrus: h264: Fix 4K decoding on H6
media: siano: Use scnprintf() for avoiding potential buffer overflow
media: rc: Use scnprintf() for avoiding potential buffer overflow
media: allegro: create new struct for channel parameters
media: allegro: move mail definitions to separate file
media: allegro: pass buffers through firmware
media: allegro: verify source and destination buffer in VCU response
media: allegro: handle dependency of bitrate and bitrate_peak
media: allegro: read bitrate mode directly from control
media: allegro: make QP configurable
media: allegro: make frame rate configurable
media: allegro: skip filler data if possible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Do not report spurious MCEs on some Intel platforms caused by errata;
by Prarit Bhargava.
- Change dev-mcelog's hardcoded limit of 32 error records to a dynamic
one, controlled by the number of logical CPUs, by Tony Luck.
- Add support for the processor identification number (PPIN) on AMD, by
Wei Huang.
* tag 'ras_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Add PPIN support for AMD MCE
x86/mce/dev-mcelog: Dynamically allocate space for machine check records
x86/mce: Do not log spurious corrected mce errors
|
|
Pull documentation updates from Jonathan Corbet:
"This has been a busy cycle for documentation work.
Highlights include:
- Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
Maybe someday we'll get to the end of this stuff...maybe...
- Some organizational work to bring some order to the core-api
manual.
- Various new docs and additions to the existing documentation.
- Typo fixes, warning fixes, ..."
* tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits)
Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT
MAINTAINERS: adjust to filesystem doc ReST conversion
docs: deprecated.rst: Add BUG()-family
doc: zh_CN: add translation for virtiofs
doc: zh_CN: index files in filesystems subdirectory
docs: locking: Drop :c:func: throughout
docs: locking: Add 'need' to hardirq section
docs: conf.py: avoid thousands of duplicate label warning on Sphinx
docs: prevent warnings due to autosectionlabel
docs: fix reference to core-api/namespaces.rst
docs: fix pointers to io-mapping.rst and io_ordering.rst files
Documentation: Better document the softlockup_panic sysctl
docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref
docs: perf: imx-ddr.rst: get rid of a warning
docs: filesystems: fuse.rst: supress a Sphinx warning
docs: translations: it: avoid duplicate refs at programming-language.rst
docs: driver.rst: supress two ReSt warnings
docs: trace: events.rst: convert some new stuff to ReST format
Documentation: Add io_ordering.rst to driver-api manual
Documentation: Add io-mapping.rst to driver-api manual
...
|
|
Pull block driver updates from Jens Axboe:
- floppy driver cleanup series from Willy
- NVMe updates and fixes (Various)
- null_blk trace improvements (Chaitanya)
- bcache fixes (Coly)
- md fixes (via Song)
- loop block size change optimizations (Martijn)
- scnprintf() use (Takashi)
* tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits)
null_blk: add trace in null_blk_zoned.c
null_blk: add tracepoint helpers for zoned mode
block: add a zone condition debug helper
nvme: cleanup namespace identifier reporting in nvme_init_ns_head
nvme: rename __nvme_find_ns_head to nvme_find_ns_head
nvme: refactor nvme_identify_ns_descs error handling
nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl
nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl
nvme: Fix controller creation races with teardown flow
nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl
nvme: Fix ctrl use-after-free during sysfs deletion
nvme-pci: Re-order nvme_pci_free_ctrl
nvme: Remove unused return code from nvme_delete_ctrl_sync
nvme: Use nvme_state_terminal helper
nvme: release ida resources
nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO
nvmet-tcp: optimize tcp stack TX when data digest is used
nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow
nvme-multipath: do not reset on unknown status
nvmet-rdma: allocate RW ctxs according to mdts
...
|
|
Pull block updates from Jens Axboe:
- Online capacity resizing (Balbir)
- Number of hardware queue change fixes (Bart)
- null_blk fault injection addition (Bart)
- Cleanup of queue allocation, unifying the node/no-node API
(Christoph)
- Cleanup of genhd, moving code to where it makes sense (Christoph)
- Cleanup of the partition handling code (Christoph)
- disk stat fixes/improvements (Konstantin)
- BFQ improvements (Paolo)
- Various fixes and improvements
* tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits)
block: return NULL in blk_alloc_queue() on error
block: move bio_map_* to blk-map.c
Revert "blkdev: check for valid request queue before issuing flush"
block: simplify queue allocation
bcache: pass the make_request methods to blk_queue_make_request
null_blk: use blk_mq_init_queue_data
block: add a blk_mq_init_queue_data helper
block: move the ->devnode callback to struct block_device_operations
block: move the part_stat* helpers from genhd.h to a new header
block: move block layer internals out of include/linux/genhd.h
block: move guard_bio_eod to bio.c
block: unexport get_gendisk
block: unexport disk_map_sector_rcu
block: unexport disk_get_part
block: mark part_in_flight and part_in_flight_rw static
block: mark block_depr static
block: factor out requeue handling from dispatch code
block/diskstats: replace time_in_queue with sum of request times
block/diskstats: accumulate all per-cpu counters in one pass
block/diskstats: more accurate approximation of io_ticks for slow disks
...
|
|
* pm-qos: (30 commits)
PM: QoS: annotate data races in pm_qos_*_value()
Documentation: power: fix pm_qos_interface.rst format warning
PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE
Documentation: PM: QoS: Update to reflect previous code changes
PM: QoS: Update file information comments
PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions
sound: Call cpu_latency_qos_*() instead of pm_qos_*()
drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*()
drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*()
drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*()
drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*()
drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*()
drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*()
drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*()
drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*()
x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*()
cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request()
PM: QoS: Add CPU latency QoS API wrappers
PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h
PM: QoS: Simplify definitions of CPU latency QoS trace events
...
|
|
Linux 5.6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Second batch of the GICv4.1 support saga
- Level triggered interrupt support for the stm32 controller
- Versatile-fpga chained interrupt fixes
- DT support for cascaded VIC interrupt controller
- RPi irqchip initialization fixes
- Multi-instance support for the Xilinx interrupt controller
- Multi-instance support for the PLIC interrupt controller
- CPU hotplug support for the PLIC interrupt controller
- Ingenic X1000 TCU support
- Small fixes all over the shop (GICv3, GICv4, Xilinx, Atmel, sa1111)
- Cleanups (setup_irq removal, zero-length array removal)
|
|
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
setup_irq() was required in older kernels as the memory allocator was not
available during early boot.
Hence replace setup_irq() by request_irq().
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/82667ae23520611b2a9d8db77e1d8aeb982f08e5.1585320721.git.afzal.mohd.ma@gmail.com
|
|
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
setup_irq() was required in older kernels as the memory allocator was not
available during early boot.
Hence replace setup_irq() by request_irq().
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/b060312689820559121ee0a6456bbc1202fb7ee5.1585320721.git.afzal.mohd.ma@gmail.com
|
|
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
setup_irq() was required in older kernels as the memory allocator was not
available during early boot.
Hence replace setup_irq() by request_irq().
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/e84ac60de8f747d49ce082659e51595f708c29d4.1585320721.git.afzal.mohd.ma@gmail.com
|
|
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
setup_irq() was required in older kernels as the memory allocator was not
available during early boot.
Hence replace setup_irq() by request_irq().
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/56e991e920ce5806771fab892574cba89a3d413f.1585320721.git.afzal.mohd.ma@gmail.com
|
|
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
setup_irq() was required in older kernels as the memory allocator was not
available during early boot.
Hence replace setup_irq() by request_irq().
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Matt Turner <mattst88@gmail.com>
Link: https://lkml.kernel.org/r/51f8ae7da9f47a23596388141933efa2bdef317b.1585320721.git.afzal.mohd.ma@gmail.com
|
|
Depending on selected SMP config options soc_device didn't get
initialised at all. With UP config vmlinux didn't link because
of missing soc bus.
Fixes: 71b9b5e0130d ("MIPS: ralink: mt7621: introduce 'soc_device' initialization")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Tested-by: René van Dorst <opensource@vdorst.com>
|
|
In the CONFIG_X86_VERBOSE_BOOTUP=Y case, the debug_puthex() macro just
turns into __puthex(), which takes 'unsigned long' as parameter.
But in the CONFIG_X86_VERBOSE_BOOTUP=N case, it is a function which
takes 'unsigned char *', causing compile warnings when the function is
used. Fix the parameter type to get rid of the warnings.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200319091407.1481-11-joro@8bytes.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into locking/core
Pull uaccess futex cleanups for Al Viro:
Consolidate access_ok() usage and the futex uaccess function zoo.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into x86/cleanups
Pull uaccess cleanups from Al Viro:
Consolidate the user access areas and get rid of uaccess_try(), user_ex()
and other warts.
|
|
In file included
from include/linux/huge_mm.h:8,
from include/linux/mm.h:567,
from arch/m68k/include/asm/uaccess_no.h:8,
from arch/m68k/include/asm/uaccess.h:3,
from include/linux/uaccess.h:11,
from include/linux/sched/task.h:11,
from include/linux/sched/signal.h:9,
from include/linux/rcuwait.h:6,
from include/linux/percpu-rwsem.h:7,
from kernel/locking/percpu-rwsem.c:6:
include/linux/fs.h:1422:29: error: array type has incomplete element type 'struct percpu_rw_semaphore'
1422 | struct percpu_rw_semaphore rw_sem[SB_FREEZE_LEVELS];
Removing the include of linux/mm.h from the uaccess header solves the problem
and various build tests of nommu configurations still work.
Fixes: 80fbaf1c3f29 ("rcuwait: Add @state argument to rcuwait_wait_event()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lkml.kernel.org/r/87fte1qzh0.fsf@nanos.tec.linutronix.de
|
|
Only one user left; the thing had been made polymorphic back in 2013
for the sake of MPX. No point keeping it now that MPX is gone.
Convert futex_atomic_cmpxchg_inatomic() to user_access_{begin,end}()
while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
