summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2024-07-14Merge tag 'x86_urgent_for_v6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Make sure TF is cleared before calling other functions (BHI mitigation in this case) in the SYSENTER compat handler, as otherwise it will warn about being in single-step mode * tag 'x86_urgent_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bhi: Avoid warning in #DB handler due to BHI mitigation
2024-07-12Merge tag 'arm-fixes-6.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of these changes are Qualcomm SoC specific and came in just after I sent out the last set of fixes. This includes two regression fixes for SoC drivers, a defconfig change to ensure the Lenovo X13s is usable and 11 changes to DT files to fix regressions and minor platform specific issues. Tony and Chunyan step back from their respective maintainership roles on the omap and unisoc platforms, and Christophe in turn takes over maintaining some of the Freescale SoC drivers that he has been taking care of in practice already. Lastly, there are two trivial fixes for the davinci and sunxi platforms" * tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY MAINTAINERS: Add more maintainers for omaps ARM: davinci: Convert comma to semicolon MAINTAINERS: Move myself from SPRD Maintainer to Reviewer Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries" arm64: dts: qcom: qdu1000: Fix LLCC reg property arm64: dts: qcom: sm6115: add iommu for sdhc_1 arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping soc: qcom: pmic_glink: disable UCSI on sc8280xp arm64: defconfig: enable Elan i2c-hid driver arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer arm64: dts: allwinner: Fix PMIC interrupt number arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers arm64: dts: qcom: sc8180x: Fix LLCC reg property again
2024-07-10Merge tag 'mm-hotfixes-stable-2024-07-10-13-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes, 15 of which are cc:stable. No identifiable theme here - all are singleton patches, 19 are for MM" * tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio() filemap: replace pte_offset_map() with pte_offset_map_nolock() arch/xtensa: always_inline get_current() and current_thread_info() sched.h: always_inline alloc_tag_{save|restore} to fix modpost warnings MAINTAINERS: mailmap: update Lorenzo Stoakes's email address mm: fix crashes from deferred split racing folio migration lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat mm: gup: stop abusing try_grab_folio nilfs2: fix kernel bug on rename operation of broken directory mm/hugetlb_vmemmap: fix race with speculative PFN walkers cachestat: do not flush stats in recency check mm/shmem: disable PMD-sized page cache if needed mm/filemap: skip to create PMD-sized page cache if needed mm/readahead: limit page cache size in page_cache_ra_order() mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray mm/damon/core: merge regions aggressively when max_nr_regions is unmet Fix userfaultfd_api to return EINVAL as expected mm: vmalloc: check if a hash-index is in cpu_possible_mask mm: prevent derefencing NULL ptr in pfn_section_valid() ...
2024-07-10ARM: davinci: Convert comma to semicolonChen Ni
Replace a comma between expression statements by a semicolon. Fixes: efc1bb8a6fd5 ("davinci: add power management support") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09arch/xtensa: always_inline get_current() and current_thread_info()Suren Baghdasaryan
Mark get_current() and current_thread_info() functions as always_inline to fix the following modpost warning: WARNING: modpost: vmlinux: section mismatch in reference: get_current+0xc (section: .text.unlikely) -> initcall_level_names (section: .init.data) The warning happens when these functions are called from an __init function and they don't get inlined (remain in the .text section) while the value they return points into .init.data section. Assuming get_current() always returns a valid address, this situation can happen only during init stage and accessing .init.data from .text section during that stage should pose no issues. Link: https://lkml.kernel.org/r/20240704132506.1011978-2-surenb@google.com Fixes: 22d407b164ff ("lib: add allocation tagging support for memory allocation profiling") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Chris Zankel <chris@zankel.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-09s390/mm: Add NULL pointer check to crst_table_free() base_crst_free()Heiko Carstens
crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used. Reported-by: Yunseong Kim <yskelg@gmail.com> Fixes: 6326c26c1514 ("s390: convert various pgalloc functions to use ptdescs") Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-08Merge tag 'sunxi-fixes-for-6.10' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner fixes for 6.10 - Fix PMIC interrupt number for Remix Mini PC * tag 'sunxi-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: Fix PMIC interrupt number Link: https://lore.kernel.org/r/ZoQY5k21RQLOrBQ3@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'qcom-arm64-defconfig-fixes-for-6.10' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm Arm64 defconfig fixes for v6.10 Enable the Elan I2C HID driver, to enable the touchscreen on devices such as the Lenovo Thinkpad X13s. * tag 'qcom-arm64-defconfig-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: enable Elan i2c-hid driver Link: https://lore.kernel.org/r/20240702025740.339563-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'qcom-arm64-fixes-for-6.10' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm Arm64 DeviceTree fixes for v6.10 This marks the PSHOLD node on SC8280XP as reserved, to resolve a regression where a reset is triggered instead of a clean shutdown. Also on SC8280XP the touchscreen properties are adjusted to make it properly described on CRD and make it work on the Lenovo Thinkpad X13s. Corrects the LLCC definitions on SC8180X and QDU1000 to allow these drivers and their dependencies to probe. X1 Elite CRD is given more CMA space, to avoid running out during boot, as PCIe SMMU is not accessible. Audio configuration is corrected, on the same. SM6115 SDHC is given an IOMMU stream, to avoid access issues. Lastly the EL2 non-secure physical timer interrupt on SA8775P is corrected from its previous incorrect value. * tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: qdu1000: Fix LLCC reg property arm64: dts: qcom: sm6115: add iommu for sdhc_1 arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers arm64: dts: qcom: sc8180x: Fix LLCC reg property again Link: https://lore.kernel.org/r/20240702030913.340814-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-06Merge tag 'powerpc-6.10-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix unnecessary copy to 0 when kernel is booted at address 0 - Fix usercopy crash when dumping dtl via debugfs - Avoid possible crash when PCI hotplug races with error handling - Fix kexec crash caused by scv being disabled before other CPUs call-in - Fix powerpc selftests build with USERCFLAGS set Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen, Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia. * tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build with USERCFLAGS set powerpc/pseries: Fix scv instruction crash with kexec powerpc/eeh: avoid possible crash when edev->pdev changes powerpc/pseries: Whitelist dtl slub object for copying to userspace powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
2024-07-05Merge tag 'riscv-for-linus-6.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix for the CMODX example in the recently added icache flushing prctl() - A fix to the perf driver to avoid corrupting event data on counter overflows when external overflow handlers are in use - A fix to clear all hardware performance monitor events on boot, to avoid dangling events firmware or previously booted kernels from triggering spuriously - A fix to the perf event probing logic to avoid erroneously reporting the presence of unimplemented counters. This also prevents some implemented counters from being reported - A build fix for the vector sigreturn selftest on clang - A fix to ftrace, which now requires the previously optional index argument to ftrace_graph_ret_addr() - A fix to avoid deadlocking if kexec crash handling triggers in an interrupt context * tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: kexec: Avoid deadlock in kexec crash path riscv: stacktrace: fix usage of ftrace_graph_ret_addr() riscv: selftests: Fix vsetivli args for clang perf: RISC-V: Check standard event availability drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus drivers/perf: riscv: Do not update the event data if uptodate documentation: Fix riscv cmodx example
2024-07-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fix from Paolo Bonzini: - s390: fix support for z16 systems * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix LPSWEY handling
2024-07-05Merge tag 'kvm-s390-master-6.10-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix z16 support The z16 support might fail with the lpswey instruction. Provide a handler.
2024-07-04Merge tag 's390-6.10-8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix and add physical to virtual address translations in dasd and virtio_ccw drivers. For virtio_ccw this is just a minimal fix. More code cleanup will follow. - Small defconfig updates * tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer s390/vfio_ccw: Fix target addresses of TIC CCWs s390: Update defconfigs
2024-07-03riscv: kexec: Avoid deadlock in kexec crash pathSong Shuai
If the kexec crash code is called in the interrupt context, the machine_kexec_mask_interrupts() function will trigger a deadlock while trying to acquire the irqdesc spinlock and then deactivate irqchip in irq_set_irqchip_state() function. Unlike arm64, riscv only requires irq_eoi handler to complete EOI and keeping irq_set_irqchip_state() will only leave this possible deadlock without any use. So we simply remove it. Link: https://lore.kernel.org/linux-riscv/20231208111015.173237-1-songshuaishuai@tinylab.org/ Fixes: b17d19a5314a ("riscv: kexec: Fixup irq controller broken in kexec crash path") Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Ryo Takakura <takakura@valinux.co.jp> Link: https://lore.kernel.org/r/20240626023316.539971-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-03riscv: stacktrace: fix usage of ftrace_graph_ret_addr()Puranjay Mohan
ftrace_graph_ret_addr() takes an `idx` integer pointer that is used to optimize the stack unwinding. Pass it a valid pointer to utilize the optimizations that might be available in the future. The commit is making riscv's usage of ftrace_graph_ret_addr() match x86_64. Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20240618145820.62112-1-puranjay@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-03Merge patch series "Assorted fixes in RISC-V PMU driver"Palmer Dabbelt
Atish Patra <atishp@rivosinc.com> says: This series contains 3 fixes out of which the first one is a new fix for invalid event data reported in lkml[2]. The last two are v3 of Samuel's patch[1]. I added the RB/TB/Fixes tag and moved 1 unrelated change to its own patch. I also changed an error message in kvm vcpu_pmu from pr_err to pr_debug to avoid redundant failure error messages generated due to the boot time quering of events implemented in the patch[1] Here is the original cover letter for the patch[1] Before this patch: $ perf list hw List of pre-defined events (to be used in -e or -M): branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cache-misses [Hardware event] cache-references [Hardware event] cpu-cycles OR cycles [Hardware event] instructions [Hardware event] ref-cycles [Hardware event] stalled-cycles-backend OR idle-cycles-backend [Hardware event] stalled-cycles-frontend OR idle-cycles-frontend [Hardware event] $ perf stat -ddd true Performance counter stats for 'true': 4.36 msec task-clock # 0.744 CPUs utilized 1 context-switches # 229.325 /sec 0 cpu-migrations # 0.000 /sec 38 page-faults # 8.714 K/sec 4,375,694 cycles # 1.003 GHz (60.64%) 728,945 instructions # 0.17 insn per cycle 79,199 branches # 18.162 M/sec 17,709 branch-misses # 22.36% of all branches 181,734 L1-dcache-loads # 41.676 M/sec 5,547 L1-dcache-load-misses # 3.05% of all L1-dcache accesses <not counted> LLC-loads (0.00%) <not counted> LLC-load-misses (0.00%) <not counted> L1-icache-loads (0.00%) <not counted> L1-icache-load-misses (0.00%) <not counted> dTLB-loads (0.00%) <not counted> dTLB-load-misses (0.00%) <not counted> iTLB-loads (0.00%) <not counted> iTLB-load-misses (0.00%) <not counted> L1-dcache-prefetches (0.00%) <not counted> L1-dcache-prefetch-misses (0.00%) 0.005860375 seconds time elapsed 0.000000000 seconds user 0.010383000 seconds sys After this patch: $ perf list hw List of pre-defined events (to be used in -e or -M): branch-instructions OR branches [Hardware event] branch-misses [Hardware event] cache-misses [Hardware event] cache-references [Hardware event] cpu-cycles OR cycles [Hardware event] instructions [Hardware event] $ perf stat -ddd true Performance counter stats for 'true': 5.16 msec task-clock # 0.848 CPUs utilized 1 context-switches # 193.817 /sec 0 cpu-migrations # 0.000 /sec 37 page-faults # 7.171 K/sec 5,183,625 cycles # 1.005 GHz 961,696 instructions # 0.19 insn per cycle 85,853 branches # 16.640 M/sec 20,462 branch-misses # 23.83% of all branches 243,545 L1-dcache-loads # 47.203 M/sec 5,974 L1-dcache-load-misses # 2.45% of all L1-dcache accesses <not supported> LLC-loads <not supported> LLC-load-misses <not supported> L1-icache-loads <not supported> L1-icache-load-misses <not supported> dTLB-loads 19,619 dTLB-load-misses <not supported> iTLB-loads 6,831 iTLB-load-misses <not supported> L1-dcache-prefetches <not supported> L1-dcache-prefetch-misses 0.006085625 seconds time elapsed 0.000000000 seconds user 0.013022000 seconds sys [1] https://lore.kernel.org/linux-riscv/20240418014652.1143466-1-samuel.holland@sifive.com/ [2] https://lore.kernel.org/all/CC51D53B-846C-4D81-86FC-FBF969D0A0D6@pku.edu.cn/ * b4-shazam-merge: perf: RISC-V: Check standard event availability drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus drivers/perf: riscv: Do not update the event data if uptodate Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-0-e01cfddcf035@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-03perf: RISC-V: Check standard event availabilitySamuel Holland
The RISC-V SBI PMU specification defines several standard hardware and cache events. Currently, all of these events are exposed to userspace, even when not actually implemented. They appear in the `perf list` output, and commands like `perf stat` try to use them. This is more than just a cosmetic issue, because the PMU driver's .add function fails for these events, which causes pmu_groups_sched_in() to prematurely stop scheduling in other (possibly valid) hardware events. Add logic to check which events are supported by the hardware (i.e. can be mapped to some counter), so only usable events are reported to userspace. Since the kernel does not know the mapping between events and possible counters, this check must happen during boot, when no counters are in use. Make the check asynchronous to minimize impact on boot time. Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Tested-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-3-e01cfddcf035@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-03x86/bhi: Avoid warning in #DB handler due to BHI mitigationAlexandre Chartre
When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler (exc_debug_kernel()) to issue a warning because single-step is used outside the entry_SYSENTER_compat() function. To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY after making sure the TF flag is cleared. The problem can be reproduced with the following sequence: $ cat sysenter_step.c int main() { asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); } $ gcc -o sysenter_step sysenter_step.c $ ./sysenter_step Segmentation fault (core dumped) The program is expected to crash, and the #DB handler will issue a warning. Kernel log: WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160 ... RIP: 0010:exc_debug_kernel+0xd2/0x160 ... Call Trace: <#DB> ? show_regs+0x68/0x80 ? __warn+0x8c/0x140 ? exc_debug_kernel+0xd2/0x160 ? report_bug+0x175/0x1a0 ? handle_bug+0x44/0x90 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? exc_debug_kernel+0xd2/0x160 exc_debug+0x43/0x50 asm_exc_debug+0x1e/0x40 RIP: 0010:clear_bhb_loop+0x0/0xb0 ... </#DB> <TASK> ? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d </TASK> [ bp: Massage commit message. ] Fixes: 7390db8aea0d ("x86/bhi: Add support for clearing branch history at syscall entry") Reported-by: Suman Maity <suman.m.maity@oracle.com> Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20240524070459.3674025-1-alexandre.chartre@oracle.com
2024-07-02s390: Update defconfigsHeiko Carstens
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-07-01Merge tag 'arm-fixes-6.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "A number of devicetree fixes came in for the rockchip platforms, correcting some of the address information, and reverting a change to the MMC controller configuration that caused regressions. Four drivers have one code change each, addressing minor build issues for the optee firmware driver, the litex SoC platform driver and two reset drivers. The riscv fixes as also simple, mainly turning off device nodes in the canaan dts files unless they are actually usable on a particular board. Finally, Drew takes over maintaining the THEAD RISC-V SoC platform" * tag 'arm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: drivers/soc/litex: drop obsolete dependency on COMPILE_TEST tee: optee: ffa: Fix missing-field-initializers warning arm64: dts: rockchip: Add sound-dai-cells for RK3368 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B reset: hisilicon: hi6220: add missing MODULE_DESCRIPTION() macro reset: gpio: Fix missing gpiolib dependency for GPIO reset controller MAINTAINERS: thead: update Maintainer arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes" ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger riscv: dts: canaan: Disable I/O devices unless used riscv: dts: canaan: Clean up serial aliases arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
2024-07-01Merge tag 'v6.10-rockchip-dtsfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Apart from the regular dts fixes for wrong addresses, missing or wrong properties, this reverts the previous move away from cd-gpios to the mmc-controller's internal card-detect. With this change applied, it was reported that boards could not detect card anymore, so this go reverted of course. * tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add sound-dai-cells for RK3368 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes" ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B Link: https://lore.kernel.org/r/10237789.nnTZe4vzsl@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01KVM: s390: fix LPSWEY handlingChristian Borntraeger
in rare cases, e.g. for injecting a machine check we do intercept all load PSW instructions via ICTL_LPSW. With facility 193 a new variant LPSWEY was added. KVM needs to handle that as well. Fixes: a3efa8429266 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com>
2024-06-30x86-32: fix cmpxchg8b_emu build error with clangLinus Torvalds
The kernel test robot reported that clang no longer compiles the 32-bit x86 kernel in some configurations due to commit 95ece48165c1 ("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions"). The build fails with arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available and the reason seems to be that not only does the cmpxchg8b instruction need four fixed registers (EDX:EAX and ECX:EBX), with the emulation fallback the inline asm also wants a fifth fixed register for the address (it uses %esi for that, but that's just a software convention with cmpxchg8b_emu). Avoiding using another pointer input to the asm (and just forcing it to use the "0(%esi)" addressing that we end up requiring for the sw fallback) seems to fix the issue. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406230912.F6XFIyA6-lkp@intel.com/ Fixes: 95ece48165c1 ("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions") Link: https://lore.kernel.org/all/202406230912.F6XFIyA6-lkp@intel.com/ Suggested-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-and-Tested-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-06-28Merge tag 'riscv-for-linus-6.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix for vector load/store instruction decoding, which could result in reserved vector element length encodings decoding as valid vector instructions. - Instruction patching now aggressively flushes the local instruction cache, to avoid situations where patching functions on the flush path results in torn instructions being fetched. - A fix to prevent the stack walker from showing up as part of traces. * tag 'riscv-for-linus-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: stacktrace: convert arch_stack_walk() to noinstr riscv: patch: Flush the icache right after patching to avoid illegal insns RISC-V: fix vector insn load/store width mask
2024-06-28Merge tag 'hardening-v6.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Remove invalid tty __counted_by annotation (Nathan Chancellor) - Add missing MODULE_DESCRIPTION()s for KUnit string tests (Jeff Johnson) - Remove non-functional per-arch kstack entropy filtering * tag 'hardening-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: tty: mxser: Remove __counted_by from mxser_board.ports[] randomize_kstack: Remove non-functional per-arch entropy filtering string: kunit: add missing MODULE_DESCRIPTION() macros
2024-06-28x86: stop playing stack games in profile_pc()Linus Torvalds
The 'profile_pc()' function is used for timer-based profiling, which isn't really all that relevant any more to begin with, but it also ends up making assumptions based on the stack layout that aren't necessarily valid. Basically, the code tries to account the time spent in spinlocks to the caller rather than the spinlock, and while I support that as a concept, it's not worth the code complexity or the KASAN warnings when no serious profiling is done using timers anyway these days. And the code really does depend on stack layout that is only true in the simplest of cases. We've lost the comment at some point (I think when the 32-bit and 64-bit code was unified), but it used to say: Assume the lock function has either no stack frame or a copy of eflags from PUSHF. which explains why it just blindly loads a word or two straight off the stack pointer and then takes a minimal look at the values to just check if they might be eflags or the return pc: Eflags always has bits 22 and up cleared unlike kernel addresses but that basic stack layout assumption assumes that there isn't any lock debugging etc going on that would complicate the code and cause a stack frame. It causes KASAN unhappiness reported for years by syzkaller [1] and others [2]. With no real practical reason for this any more, just remove the code. Just for historical interest, here's some background commits relating to this code from 2006: 0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels") 31679f38d886 ("Simplify profile_pc on x86-64") and a code unification from 2009: ef4512882dbe ("x86: time_32/64.c unify profile_pc") but the basics of this thing actually goes back to before the git tree. Link: https://syzkaller.appspot.com/bug?extid=84fe685c02cd112a2ac3 [1] Link: https://lore.kernel.org/all/CAK55_s7Xyq=nh97=K=G1sxueOFrJDAvPOJAL4TPTCAYvmxO9_A@mail.gmail.com/ [2] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-06-28Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A pair of small arm64 fixes for -rc6. One is a fix for the recently merged uffd-wp support (which was triggering a spurious warning) and the other is a fix to the clearing of the initial idmap pgd in some configurations Summary: - Fix spurious page-table warning when clearing PTE_UFFD_WP in a live pte - Fix clearing of the idmap pgd when using large addressing modes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Clear the initial ID map correctly before remapping arm64: mm: Permit PTE SW bits to change in live mappings
2024-06-28randomize_kstack: Remove non-functional per-arch entropy filteringKees Cook
An unintended consequence of commit 9c573cd31343 ("randomize_kstack: Improve entropy diffusion") was that the per-architecture entropy size filtering reduced how many bits were being added to the mix, rather than how many bits were being used during the offsetting. All architectures fell back to the existing default of 0x3FF (10 bits), which will consume at most 1KiB of stack space. It seems that this is working just fine, so let's avoid the confusion and update everything to use the default. The prior intent of the per-architecture limits were: arm64: capped at 0x1FF (9 bits), 5 bits effective powerpc: uncapped (10 bits), 6 or 7 bits effective riscv: uncapped (10 bits), 6 bits effective x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective s390: capped at 0xFF (8 bits), undocumented effective entropy Current discussion has led to just dropping the original per-architecture filters. The additional entropy appears to be safe for arm64, x86, and s390. Quoting Arnd, "There is no point pretending that 15.75KB is somehow safe to use while 15.00KB is not." Co-developed-by: Yuntao Liu <liuyuntao12@huawei.com> Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com> Fixes: 9c573cd31343 ("randomize_kstack: Improve entropy diffusion") Link: https://lore.kernel.org/r/20240617133721.377540-1-liuyuntao12@huawei.com Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Link: https://lore.kernel.org/r/20240619214711.work.953-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org>
2024-06-28powerpc/pseries: Fix scv instruction crash with kexecNicholas Piggin
kexec on pseries disables AIL (reloc_on_exc), required for scv instruction support, before other CPUs have been shut down. This means they can execute scv instructions after AIL is disabled, which causes an interrupt at an unexpected entry location that crashes the kernel. Change the kexec sequence to disable AIL after other CPUs have been brought down. As a refresher, the real-mode scv interrupt vector is 0x17000, and the fixed-location head code probably couldn't easily deal with implementing such high addresses so it was just decided not to support that interrupt at all. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com> Closes: https://lore.kernel.org/3b4b2943-49ad-4619-b195-bc416f1d1409@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com> Link: https://msgid.link/20240625134047.298759-1-npiggin@gmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2024-06-27Merge tag 's390-6.10-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Add missing virt_to_phys() conversion for directed interrupt bit vectors - Fix broken configuration change notifications for virtio-ccw - Fix sclp_init() cleanup path on failure and as result - fix a list double add warning - Fix unconditional adjusting of GOT entries containing undefined weak symbols that resolve to zero * tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/boot: Do not adjust GOT entries for undef weak sym s390/sclp: Fix sclp_init() cleanup on failure s390/virtio_ccw: Fix config change notifications s390/pci: Add missing virt_to_phys() for directed DIBV
2024-06-27Merge tag 'riscv-dt-fixes-for-v6.10-rc5+' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Devicetree fixes for v6.10-rc5+ T-Head: Jisheng hasn't got enough time to look after the platform, so Drew Fustini is going to take over. StarFive: A fix for a regulator voltage range that prevented using low performance SD cards. Canaan: Cleanup for some "over eager" aliases for serial ports that did not exist on some boards and I/O devices disabled on boards where they were not actually in use. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-26Merge patch "riscv: stacktrace: convert arch_stack_walk() to noinstr"Palmer Dabbelt
This first patch in the larger series is a fix, so I'm merging it into fixes while the rest of the patch set is still under development. * b4-shazam-merge: riscv: stacktrace: convert arch_stack_walk() to noinstr Link: https://lore.kernel.org/r/20240613-dev-andyc-dyn-ftrace-v4-v1-0-1a538e12c01e@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-06-26riscv: stacktrace: convert arch_stack_walk() to noinstrAndy Chiu
arch_stack_walk() is called intensively in function_graph when the kernel is compiled with CONFIG_TRACE_IRQFLAGS. As a result, the kernel logs a lot of arch_stack_walk and its sub-functions into the ftrace buffer. However, these functions should not appear on the trace log because they are part of the ftrace itself. This patch references what arm64 does for the smae function. So it further prevent the re-enter kprobe issue, which is also possible on riscv. Related-to: commit 0fbcd8abf337 ("arm64: Prohibit instrumentation on arch_stack_walk()") Fixes: 680341382da5 ("riscv: add CALLER_ADDRx support") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240613-dev-andyc-dyn-ftrace-v4-v1-1-1a538e12c01e@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-06-26riscv: patch: Flush the icache right after patching to avoid illegal insnsAlexandre Ghiti
We cannot delay the icache flush after patching some functions as we may have patched a function that will get called before the icache flush. The only way to completely avoid such scenario is by flushing the icache as soon as we patch a function. This will probably be costly as we don't batch the icache maintenance anymore. Fixes: 6ca445d8af0e ("riscv: Fix early ftrace nop patching") Reported-by: Conor Dooley <conor.dooley@microchip.com> Closes: https://lore.kernel.org/linux-riscv/20240613-lubricant-breath-061192a9489a@wendy/ Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20240624082141.153871-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-06-25RISC-V: fix vector insn load/store width maskJesse Taube
RVFDQ_FL_FS_WIDTH_MASK should be 3 bits [14-12], shifted down by 12 bits. Replace GENMASK(3, 0) with GENMASK(2, 0). Fixes: cd054837243b ("riscv: Allocate user's vector context in the first-use trap") Signed-off-by: Jesse Taube <jesse@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20240606182800.415831-1-jesse@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-06-25syscalls: mmap(): use unsigned offset type consistentlyArnd Bergmann
Most architectures that implement the old-style mmap() with byte offset use 'unsigned long' as the type for that offset, but microblaze and riscv have the off_t type that is shared with userspace, matching the prototype in include/asm-generic/syscalls.h. Make this consistent by using an unsigned argument everywhere. This changes the behavior slightly, as the argument is shifted to a page number, and an user input with the top bit set would result in a negative page offset rather than a large one as we use elsewhere. For riscv, the 32-bit sys_mmap2() definition actually used a custom type that is different from the global declaration, but this was missed due to an incorrect type check. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25s390: remove native mmap2() syscallArnd Bergmann
The mmap2() syscall has never been used on 64-bit s390x and should have been removed as part of 5a79859ae0f3 ("s390: remove 31 bit support"). Remove it now. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25hexagon: fix fadvise64_64 calling conventionsArnd Bergmann
fadvise64_64() has two 64-bit arguments at the wrong alignment for hexagon, which turns them into a 7-argument syscall that is not supported by Linux. The downstream musl port for hexagon actually asks for a 6-argument version the same way we do it on arm, csky, powerpc, so make the kernel do it the same way to avoid having to change both. Link: https://github.com/quic/musl/blob/hexagon/arch/hexagon/syscall_arch.h#L78 Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25csky, hexagon: fix broken sys_sync_file_rangeArnd Bergmann
Both of these architectures require u64 function arguments to be passed in even/odd pairs of registers or stack slots, which in case of sync_file_range would result in a seven-argument system call that is not currently possible. The system call is therefore incompatible with all existing binaries. While it would be possible to implement support for seven arguments like on mips, it seems better to use a six-argument version, either with the normal argument order but misaligned as on most architectures or with the reordered sync_file_range2() calling conventions as on arm and powerpc. Cc: stable@vger.kernel.org Acked-by: Guo Ren <guoren@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25sh: rework sync_file_range ABIArnd Bergmann
The unusual function calling conventions on SuperH ended up causing sync_file_range to have the wrong argument order, with the 'flags' argument getting sorted before 'nbytes' by the compiler. In userspace, I found that musl, glibc, uclibc and strace all expect the normal calling conventions with 'nbytes' last, so changing the kernel to match them should make all of those work. In order to be able to also fix libc implementations to work with existing kernels, they need to be able to tell which ABI is used. An easy way to do this is to add yet another system call using the sync_file_range2 ABI that works the same on all architectures. Old user binaries can now work on new kernels, and new binaries can try the new sync_file_range2() to work with new kernels or fall back to the old sync_file_range() version if that doesn't exist. Cc: stable@vger.kernel.org Fixes: 75c92acdd5b1 ("sh: Wire up new syscalls.") Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25powerpc: restore some missing spu syscallsArnd Bergmann
A couple of system calls were inadventently removed from the table during a bugfix for 32-bit powerpc entry. Restore the original behavior. Fixes: e23750623835 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs") Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25parisc: use generic sys_fanotify_mark implementationArnd Bergmann
The sys_fanotify_mark() syscall on parisc uses the reverse word order for the two halves of the 64-bit argument compared to all syscalls on all 32-bit architectures. As far as I can tell, the problem is that the function arguments on parisc are sorted backwards (26, 25, 24, 23, ...) compared to everyone else, so the calling conventions of using an even/odd register pair in native word order result in the lower word coming first in function arguments, matching the expected behavior on little-endian architectures. The system call conventions however ended up matching what the other 32-bit architectures do. A glibc cleanup in 2020 changed the userspace behavior in a way that handles all architectures consistently, but this inadvertently broke parisc32 by changing to the same method as everyone else. The change made it into glibc-2.35 and subsequently into debian 12 (bookworm), which is the latest stable release. This means we need to choose between reverting the glibc change or changing the kernel to match it again, but either hange will leave some systems broken. Pick the option that is more likely to help current and future users and change the kernel to match current glibc. This also means the behavior is now consistent across architectures, but it breaks running new kernels with old glibc builds before 2.35. Link: https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=d150181d73d9 Link: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/arch/parisc/kernel/sys_parisc.c?h=57b1dfbd5b4a39d Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org> Tested-by: Helge Deller <deller@gmx.de> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- I found this through code inspection, please double-check to make sure I got the bug and the fix right. The alternative is to fix this by reverting glibc back to the unusual behavior.
2024-06-25parisc: use correct compat recv/recvfrom syscallsArnd Bergmann
Johannes missed parisc back when he introduced the compat version of these syscalls, so receiving cmsg messages that require a compat conversion is still broken. Use the correct calls like the other architectures do. Fixes: 1dacc76d0014 ("net/compat/wext: send different messages to compat tasks") Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25sparc: fix compat recv/recvfrom syscallsArnd Bergmann
sparc has the wrong compat version of recv() and recvfrom() for both the direct syscalls and socketcall(). The direct syscalls just need to use the compat version. For socketcall, the same thing could be done, but it seems better to completely remove the custom assembler code for it and just use the same implementation that everyone else has. Fixes: 1dacc76d0014 ("net/compat/wext: send different messages to compat tasks") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25sparc: fix old compat_sys_select()Arnd Bergmann
sparc has two identical select syscalls at numbers 93 and 230, respectively. During the conversion to the modern syscall.tbl format, the older one of the two broke in compat mode, and now refers to the native 64-bit syscall. Restore the correct behavior. This has very little effect, as glibc has been using the newer number anyway. Fixes: 6ff645dd683a ("sparc: add system call table generation support") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25syscalls: fix compat_sys_io_pgetevents_time64 usageArnd Bergmann
Using sys_io_pgetevents() as the entry point for compat mode tasks works almost correctly, but misses the sign extension for the min_nr and nr arguments. This was addressed on parisc by switching to compat_sys_io_pgetevents_time64() in commit 6431e92fc827 ("parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode"), as well as by using more sophisticated system call wrappers on x86 and s390. However, arm64, mips, powerpc, sparc and riscv still have the same bug. Change all of them over to use compat_sys_io_pgetevents_time64() like parisc already does. This was clearly the intention when the function was originally added, but it got hooked up incorrectly in the tables. Cc: stable@vger.kernel.org Fixes: 48166e6ea47d ("y2038: add 64-bit time_t syscalls to all 32-bit architectures") Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-25s390/boot: Do not adjust GOT entries for undef weak symJens Remus
Since commit 778666df60f0 ("s390: compile relocatable kernel without -fPIE") and commit 00cda11d3b2e ("s390: Compile kernel with -fPIC and link with -no-pie") the kernel on s390x may have a Global Offset Table (GOT) whose entries are adjusted for KASLR in kaslr_adjust_got(). The GOT may contain entries for undefined weak symbols that resolved to zero. That is the resulting GOT entry value is zero. Adjusting those entries unconditionally in kaslr_adjust_got() is wrong. Otherwise the following sample code would erroneously assume foo to be defined, due to the adjustment changing the zero-value to a non-zero one: extern int foo __attribute__((weak)); if (*foo) /* foo is defined [or undefined and erroneously adjusted] */ The vmlinux build at commit 00cda11d3b2e ("s390: Compile kernel with -fPIC and link with -no-pie") with defconfig actually had two GOT entries for the undefined weak symbols __start_BTF and __stop_BTF: $ objdump -tw vmlinux | grep -F "*UND*" 0000000000000000 w *UND* 0000000000000000 __stop_BTF 0000000000000000 w *UND* 0000000000000000 __start_BTF $ readelf -rw vmlinux | grep -E "R_390_GOTENT +0{16}" 000000345760 2776a0000001a R_390_GOTENT 0000000000000000 __stop_BTF + 2 000000345766 2d5480000001a R_390_GOTENT 0000000000000000 __start_BTF + 2 The s390-specific vmlinux linker script sets the section start to __START_KERNEL, which is currently defined as 0x100000 on s390x. Access to lowcore is performed via a pointer of 0 and not a symbol in a section starting at 0. The first 64K are reserved for the loader on s390x. Thus it is safe to assume that __START_KERNEL will never be 0. As a result there cannot be any defined symbols resolving to zero in the kernel. Note that the first three GOT entries are reserved for the dynamic loader on s390x. [1] In the kernel they are zero. Therefore no extra handling is required to skip these. Skip adjusting GOT entries with a value of zero in kaslr_adjust_got(). While at it update the comment when a GOT exists on s390x. Since commit 00cda11d3b2e ("s390: Compile kernel with -fPIC and link with -no-pie") it no longer only exists when compiling with Clang, but also with GCC. [1]: s390x ELF ABI, section "Global Offset Table", https://github.com/IBM/s390x-abi/releases Fixes: 778666df60f0 ("s390: compile relocatable kernel without -fPIE") Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-06-24arm64: dts: rockchip: Add sound-dai-cells for RK3368Alex Bee
Add the missing #sound-dai-cells for RK3368's I2S and S/PDIF controllers. Fixes: f7d89dfe1e31 ("arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs") Fixes: 0328d68ea76d ("arm64: dts: rockchip: add rk3368 spdif node") Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20240623090116.670607-4-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-06-24arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4BAndy Yan
According to the hardware design, the i2c address of audio codec es8316 on Cool Pi 4B is 0x10. This fix the read/write error like bellow: es8316 7-0011: ASoC: error at soc_component_write_no_lock on es8316.7-0011 for register: [0x0000000c] -6 es8316 7-0011: ASoC: error at soc_component_write_no_lock on es8316.7-0011 for register: [0x00000003] -6 es8316 7-0011: ASoC: error at soc_component_read_no_lock on es8316.7-0011 for register: [0x00000016] -6 es8316 7-0011: ASoC: error at soc_component_read_no_lock on es8316.7-0011 for register: [0x00000016] -6 Fixes: 3f5d336d64d6 ("arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B") Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20240623115526.2154645-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-15 13:22:55 +0000