summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-08-05powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_APIBenjamin Herrenschmidt
Some new functions are exposed for use by the IOMMU code but won't build when CONFIG_IOMMU_API isn't set, so shield them appropriately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc: Reduce scariness of interrupt frames in stack tracesPaul Mackerras
Some people see things like "Exception: 501" in stack traces in dmesg and assume that means that something has gone badly wrong, when in fact "Exception: 501" just means a device interrupt was taken. This changes "Exception" to "interrupt" to make it clearer that we are just recording the fact of a change in control flow rather than some error condition. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc: start loop at section start of start in vmemmap_populated()Li Zhong
vmemmap_populated() checks whether the [start, start + page_size) has valid pfn numbers, to know whether a vmemmap mapping has been created that includes this range. Some range before end might not be checked by this loop: sec11start......start11..sec11end/sec12start..end....start12..sec12end as the above, for start11(section 11), it checks [sec11start, sec11end), and loop ends as the next start(start12) is bigger than end. However, [sec11end/sec12start, end) is not checked here. So before the loop, adjust the start to be the start of the section, so we don't miss ranges like the above. After we adjust start to be the start of the section, it also means it's aligned with vmemmap as of the sizeof struct page, so we could use page_to_pfn directly in the loop. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc: implement vmemmap_free()Li Zhong
vmemmap_free() does the opposite of vmemap_populate(). This patch also puts vmemmap_free() and vmemmap_list_free() into CONFIG_MEMMORY_HOTPLUG. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc: implement vmemmap_remove_mapping() for BOOK3SLi Zhong
This is to be called in vmemmap_free(), leave the implementation on BOOK3E empty as before. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc: implement vmemmap_list_free()Li Zhong
This patch implements vmemmap_list_free() for vmemmap_free(). The freed entries will be removed from vmemmap_list, and form a freed list, with next as the header. The next position in the last allocated page is kept at the list tail. When allocation, if there are freed entries left, get it from the freed list; if no freed entries left, get it like before from the last allocated pages. With this change, realmode_pfn_to_page() also needs to be changed to walk all the entries in the vmemmap_list, as the virt_addr of the entries might not be stored in order anymore. It helps to reuse the memory when continuous doing memory hot-plug/remove operations, but didn't reclaim the pages already allocated, so the memory usage will only increase, but won't exceed the value for the largest memory configuration. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTEMadhusudanan Kandasamy
remap_4k_pfn() silently truncates upper bits of input 4K PFN if it cannot be contained in PTE. This leads invalid memory mapping and could result in a system crash when the memory is accessed. This patch fails remap_4k_pfn() and returns -EINVAL if the input 4K PFN cannot be contained in PTE. V3 : Added parentheses to protect 'pfn' and entire macro as suggested by Brian. V2 : Rewritten to avoid helper function as suggested by Stephen Rothwell. Signed-off-by: Madhusudanan Kandasamy <kmadhu@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.Mahesh Salgaonkar
(NOTE: This patch depends on upstream HMI handling patchset at https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-July/119731.html) The current HMI handling on napping cpus does not take care of endianess issue. On LE host kernel when we wake up from nap due to HMI interrupt we would checkstop while jumping into opal call. There is a similar issue in case of fast sleep wakeup where the code invokes opal_resync_tb opal call without handling LE issue. This patch fixes that as well. With this patch applied, HMIs handling on LE host kernel works fine. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/book3s: handle HMIs for cpus in nap mode.Mahesh Salgaonkar
HMIs are thread specific and can come while thread is in sleep/nap mode. Hence with SMT=off mode we can receive HMIs on sleeping threads. For interrupt received in nap mode, cpu wakes up at system reset vector, clears the interrupt and go back to nap mode again. But HMIs are sticky and they keep happening until we clear reason bits from HMER. Hence add a special check for HMI in reset vector (through power7_wakeup_* functions) and invoke opal call to handle HMI. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Invoke opal call to handle hmi.Mahesh Salgaonkar
When we hit the HMI in Linux, invoke opal call to handle/recover from HMI errors in real mode and then in virtual mode during check_irq_replay() invoke opal_poll_events()/opal_do_notifier() to retrieve HMI event from OPAL and act accordingly. Now that we are ready to handle HMI interrupt directly in linux, remove the HMI interrupt registration with firmware. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/book3s: Add basic infrastructure to handle HMI in Linux.Mahesh Salgaonkar
Handle Hypervisor Maintenance Interrupt (HMI) in Linux. This patch implements basic infrastructure to handle HMI in Linux host. The design is to invoke opal handle hmi in real mode for recovery and set irq_pending when we hit HMI. During check_irq_replay pull opal hmi event and print hmi info on console. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/iommu: Fix comments with it_page_shiftAlexey Kardashevskiy
There is a couple of commented debug prints which still use IOMMU_PAGE_SHIFT() which is not defined for POWERPC anymore, replace them with it_page_shift. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Handle compound PE in config accessorsGavin Shan
The PCI config accessors check for PE frozen state and clear it if EEH isn't functional. The patch handles compound PE in config accessors if PHB supports it. For consistency, all PEs will be put into frozen state if any one in compound group gets frozen by hardware. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Handle compound PE for EEHGavin Shan
The patch handles compound PE for EEH backend. If one specific PE in compound group has been frozen, we enforces to freeze all PEs in the group. If we're enable DMA or MMIO for one PE in compound group, DMA or MMIO of all PEs in the group will be enabled. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Handle compound PEGavin Shan
The patch introduces 3 PHB callbacks: compound PE state retrieval, force freezing and unfreezing compound PE. The PCI config accessors and PowerNV EEH backend can use them in subsequent patches. We don't export the capability of compound PE to EEH core, which helps avoiding more complexity to EEH core. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Split ioda_eeh_get_state()Gavin Shan
Function ioda_eeh_get_state() is used to fetch EEH state for PHB or PE. We're going to support compound PE and the function becomes more complicated with that. The patch splits the function into two functions for PHB and PE cases separately to improve readability. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Allow to freeze PEGavin Shan
The patch synchronizes header file with firmware to have new OPAL API opal_pci_eeh_freeze_set(), which is used to freeze the specified PE in order to support "compound" PE. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Enable M64 aperatus for PHB3Guo Chao
This patch enables M64 aperatus for PHB3. We already had platform hook (ppc_md.pcibios_window_alignment) to affect the PCI resource assignment done in PCI core so that each PE's M32 resource was built on basis of M32 segment size. Similarly, we're using that for M64 assignment on basis of M64 segment size. * We're using last M64 BAR to cover M64 aperatus, and it's shared by all 256 PEs. * We don't support P7IOC yet. However, some function callbacks are added to (struct pnv_phb) so that we can reuse them on P7IOC in future. * PE, corresponding to PCI bus with large M64 BAR device attached, might span multiple M64 segments. We introduce "compound" PE to cover the case. The compound PE is a list of PEs and the master PE is used as before. The slave PEs are just for MMIO isolation. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Aux PE data for error logGavin Shan
The patch allows PE (struct eeh_pe) instance to have auxillary data, whose size is configurable on basis of platform. For PowerNV, the auxillary data will be used to cache PHB diag-data for that PE (frozen PE or fenced PHB). In turn, we can retrieve the diag-data at any later points. It's useful for the case of VFIO PCI devices where the error log should be cached, and then be retrieved by the guest at later point. Also, it can avoid PHB diag-data overwritting if another frozen PE reported and the previous diag-data isn't fetched by guest. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Make diag-data not endian dependentGavin Shan
It's followup of commit ddf0322a ("powerpc/powernv: Fix endianness problems in EEH"). The patch helps to get non-endian-dependent diag-data. Cc: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Replace pr_warning() with pr_warn()Gavin Shan
pr_warn() is equal to pr_warning(), but the former is a bit more formal according to commit fc62f2f ("kernel.h: add pr_warn for symmetry to dev_warn, netdev_warn"). The patch replaces pr_warning() with pr_warn(). Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Reduce lines of log dumpGavin Shan
The patch prints 4 PCIE or AER config registers each line, which is part of the EEH log so that it looks a bit more compact. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Selectively enable IO for error logGavin Shan
According to the experiment I did, PCI config access is blocked on P7IOC frozen PE by hardware, but PHB3 doesn't do that. That means we always get 0xFF's while dumping PCI config space of the frozen PE on P7IOC. We don't have the problem on PHB3. So we have to enable I/O prioir to collecting error log. Otherwise, meaningless 0xFF's are always returned. The patch fixes it by EEH flag (EEH_ENABLE_IO_FOR_LOG), which is selectively set to indicate the case for: P7IOC on PowerNV platform, pSeries platform. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Refactor EEH flag accessorsGavin Shan
There are multiple global EEH flags. Almost each flag has its own accessor, which doesn't make sense. The patch refactors EEH flag accessors so that they look unified: eeh_add_flag(): Add EEH flag eeh_clear_flag(): Clear EEH flag eeh_has_flag(): Check if one specific flag has been set eeh_enabled(): Check if EEH functionality has been enabled Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Fetch IOMMU table in reliable wayGavin Shan
Function eeh_iommu_group_to_pe() iterates each PCI device to check the binding IOMMU group with get_iommu_table_base(), which possibly fetches pdev->dev.archdata.dma_data.dma_offset. It's (0x1 << 59) for "bypass" cases. The patch fixes the issue by iterating devices hooked to the IOMMU group and fetch IOMMU table there. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Fix IOMMU table for VFIO devGavin Shan
On PHB3, PCI devices can bypass IOMMU for DMA access. If we pass through one PCI device, whose hose driver ever enable the bypass mode, pdev->dev.archdata.dma_data.iommu_table_base isn't IOMMU table. However, EEH needs access the IOMMU table when the device is owned by guest. The patch fixes pdev->dev.archdata.dma_data.iommu_table when passing through the device to guest in pnv_pci_ioda2_set_bypass(). Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Wrong place to call pci_get_slot()Mike Qiu
pci_get_slot() is called with hold of PCI bus semaphore and it's not safe to be called in interrupt context. However, we possibly checks EEH error and calls the function in interrupt context. To avoid using pci_get_slot(), we turn into device tree for fetching location code. Otherwise, we might run into WARN_ON() as following messages indicate: WARNING: at drivers/pci/search.c:223 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc3+ #72 task: c000000001367af0 ti: c000000001444000 task.ti: c000000001444000 NIP: c000000000497b70 LR: c000000000037530 CTR: 000000003003d114 REGS: c000000001446fa0 TRAP: 0700 Not tainted (3.16.0-rc3+) MSR: 9000000000029032 <SF,HV,EE,ME,IR,DR,RI> CR: 48002422 XER: 20000000 CFAR: c00000000003752c SOFTE: 0 : NIP [c000000000497b70] .pci_get_slot+0x40/0x110 LR [c000000000037530] .eeh_pe_loc_get+0x150/0x190 Call Trace: .of_get_property+0x30/0x60 (unreliable) .eeh_pe_loc_get+0x150/0x190 .eeh_dev_check_failure+0x1b4/0x550 .eeh_check_failure+0x90/0xf0 .lpfc_sli_check_eratt+0x504/0x7c0 [lpfc] .lpfc_poll_eratt+0x64/0x100 [lpfc] .call_timer_fn+0x64/0x190 .run_timer_softirq+0x2cc/0x3e0 Cc: stable@vger.kernel.org Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc: Fix wrong defintion in boot/io.hLucas Tanure
Fix wrong __IO_H definition in boot/io.h Reported-by: Fernando Silveira <fsilveira@gmail.com> Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/pci: Reorder pci bus/bridge unregistration during PHB removalTyrel Datwyler
Commit bcdde7e made __sysfs_remove_dir() recursive and introduced a BUG_ON during PHB removal while attempting to delete the power managment attribute group of the bus. This is a result of tearing the bridge and bus devices down out of order in remove_phb_dynamic. Since, the the bus resides below the bridge in the sysfs device tree it should be torn down first. This patch simply moves the device_unregister call for the PHB bridge device after the device_unregister call for the PHB bus. Fixes: bcdde7e221a8 ("sysfs: make __sysfs_remove_dir() recursive") Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Update dev->dma_mask in pci_set_dma_mask() pathBrian W Hart
powerpc defines various machine-specific routines for handling pci_set_dma_mask(). The routines for machine "PowerNV" may neglect to set dev->dma_mask. This could confuse anyone (e.g. drivers) that consult dev->dma_mask to find the current mask. Set the dma_mask in the PowerNV leaf routine. Signed-off-by: Brian W. Hart <hartb@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/64e: Add __ref to early_alloc_pgtable()Scott Wood
This silences a section mismatch warning. early_alloc_pgtable() is called from map_kernel_page() which cannot be __init, but only when slab_is_available() returns false which can only happen during early boot. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/mm/numa: Fix break placementAndrey Utkin
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81631 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: sysfs entries lostMike Qiu
The sysfs entries are lost because of commit 2213fb1 ("powerpc/eeh: Skip eeh sysfs when eeh is disabled"). That commit added condition to create sysfs entries with EEH_ENABLED, which isn't populated when trying to create sysfs entries on PowerNV platform during system boot time. The patch fixes the issue by: * Reoder EEH initialization functions so that they're same on PowerNV/pSeries. * Cache PE's primary bus by PowerNV platform instead of EEH core to avoid kernel crash caused by the function reorder. Another benefit with this is to avoid one eeh_probe_mode_dev() in EEH core. Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: EEH support for VFIO PCI deviceGavin Shan
The patch exports functions to be used by new VFIO ioctl command, which will be introduced in subsequent patch, to support EEH functinality for VFIO PCI devices. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Avoid event on passed PEGavin Shan
We must not handle EEH error on devices which are passed to somebody else. Instead, we expect that the frozen device owner detects an EEH error and recovers from it. This avoids EEH error handling on passed through devices so the device owner gets a chance to handle them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt
Scott writes: Highlights include e6500 hardware threading support, an e6500 TLB erratum workaround, corenet error reporting, support for a new board, and some minor fixes.
2014-08-04sparc: Add "install" targetDavid L Stevens
This patches adds an "install" target to install kernel builds for SPARC, modeled after the i386 script. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04arch/sparc/math-emu/math_32.c: drop stray break operatorAndrey Utkin
This commit is a guesswork, but it seems to make sense to drop this break, as otherwise the following line is never executed and becomes dead code. And that following line actually saves the result of local calculation by the pointer given in function argument. So the proposed change makes sense if this code in the whole makes sense (but I am unable to analyze it in the whole). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04sparc64: ldc_connect() should not return EINVAL when handshake is in progress.Sowmini Varadhan
The LDC handshake could have been asynchronously triggered after ldc_bind() enables the ldc_rx() receive interrupt-handler (and thus intercepts incoming control packets) and before vio_port_up() calls ldc_connect(). If that is the case, ldc_connect() should return 0 and let the state-machine progress. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04sparc64: Guard against flushing openfirmware mappings.David S. Miller
Based almost entirely upon a patch by Christopher Alexander Tobias Schulze. In commit db64fe02258f1507e13fe5212a989922323685ce ("mm: rewrite vmap layer") lazy VMAP tlb flushing was added to the vmalloc layer. This causes problems on sparc64. Sparc64 has two VMAP mapped regions and they are not contiguous with eachother. First we have the malloc mapping area, then another unrelated region, then the vmalloc region. This "another unrelated region" is where the firmware is mapped. If the lazy TLB flushing logic in the vmalloc code triggers after we've had both a module unload and a vfree or similar, it will pass an address range that goes from somewhere inside the malloc region to somewhere inside the vmalloc region, and thus covering the openfirmware area entirely. The sparc64 kernel learns about openfirmware's dynamic mappings in this region early in the boot, and then services TLB misses in this area. But openfirmware has some locked TLB entries which are not mentioned in those dynamic mappings and we should thus not disturb them. These huge lazy TLB flush ranges causes those openfirmware locked TLB entries to be removed, resulting in all kinds of problems including hard hangs and crashes during reboot/reset. Besides causing problems like this, such huge TLB flush ranges are also incredibly inefficient. A plea has been made with the author of the VMAP lazy TLB flushing code, but for now we'll put a safety guard into our flush_tlb_kernel_range() implementation. Since the implementation has become non-trivial, stop defining it as a macro and instead make it a function in a C source file. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04Merge tag 'usb-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while" * tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (211 commits) USB: devio: fix issue with log flooding uas: Log a warning when we cannot use uas because the hcd lacks streams uas: Only complain about missing sg if all other checks succeed xhci: Add missing checks for xhci_alloc_command failure xhci: Rename Asrock P67 pci product-id to EJ168 xhci: Blacklist using streams on the Etron EJ168 controller uas: Limit qdepth to 32 when connected over usb-2 uwb/whci: use correct structure type name in sizeof usb-core bInterval quirk USB: serial: ftdi_sio: Add support for new Xsens devices USB: serial: ftdi_sio: Annotate the current Xsens PID assignments usb: chipidea: debug: fix sparse non static symbol warnings usb: ci_hdrc_imx doc: fsl,usbphy is required usb: ci_hdrc_imx: Return -EINVAL for missing USB PHY usb: core: allow zero packet flag for interrupt urbs usb: lvstest: Fix sparse warnings generated by kbuild test bot USB: core: hcd-pci: free IRQ before disabling PCI device when shutting down phy: miphy365x: Represent each PHY channel as a DT subnode phy: miphy365x: Provide support for the MiPHY356x Generic PHY phy: miphy365x: Add Device Tree bindings for the MiPHY365x ...
2014-08-04Merge tag 'tty-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver update from Greg KH: "Here's the big tty / serial driver update for 3.17-rc1. Nothing major, just a number of fixes and new features for different serial drivers, and some more tty core fixes and documentation of the tty locks. All of these have been in linux-next for a while" * tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (82 commits) tty/n_gsm.c: fix a memory leak in gsmld_open pch_uart: don't hardcode PCI slot to get DMA device tty: n_gsm, use setup_timer Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console" serial: sc16is7xx: Correct initialization of s->clk serial: 8250_dw: Add support for deferred probing serial: 8250_dw: Add optional reset control support serial: st-asc: Fix overflow in baudrate calculation serial: st-asc: Don't call BUG in asc_console_setup() tty: serial: msm: Make of_device_id array const tty/n_gsm.c: get gsm->num after gsm_activate_mux serial/core: Fix too big allocation for attribute member drivers/tty/serial: use correct type for dma_map/unmap serial: altera_jtaguart: Fix putchar function passed to uart_console_write() serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers Serial: allow port drivers to have a default attribute group tty: kgdb_nmi: Automatically manage tty enable serial: altera_jtaguart: Adpot uart_console_write() serial: samsung: improve code clarity by defining a variable serial: samsung: correct the case and default order in switch ...
2014-08-04Merge tag 'staging-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while" * tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits) staging: comedi: addi_apci_1564: remove diagnostic interrupt support code staging: comedi: addi_apci_1564: add subdevice to check diagnostic status staging: wlan-ng: coding style problem fix staging: wlan-ng: fixing coding style problems staging: comedi: ii_pci20kc: request and ioremap memory staging: lustre: bitwise vs logical typo staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h staging: dgnc: rephrase comment staging: comedi: ni_tio: remove some dead code staging: rtl8723au: Fix static symbol sparse warning staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc' staging: rtl8723au: Do not duplicate kernel provided USB macros staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown staging: rtl8723au: Remove two never set variables staging: rtl8723au: RSSI_test is never set staging:r8190: coding style: Fixed checkpatch reported Error staging:r8180: coding style: Fixed too long lines staging:r8180: coding style: Fixed commenting style staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer ...
2014-08-04Merge tag 'driver-core-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver-core pull request for 3.17-rc1. Largest thing in here is the dma-buf rework and fence code, that touched many different subsystems so it was agreed it should go through this tree to handle merge issues. There's also some firmware loading updates, as well as tests added, and a few other tiny changes, the changelog has the details. All have been in linux-next for a long time" * tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) ARM: imx: Remove references to platform_bus in mxc code firmware loader: Fix _request_firmware_load() return val for fw load abort platform: Remove most references to platform_bus device test: add firmware_class loader test doc: fix minor typos in firmware_class README staging: android: Cleanup style issues Documentation: devres: Sort managed interfaces Documentation: devres: Add devm_kmalloc() et al fs: debugfs: remove trailing whitespace kernfs: kernel-doc warning fix debugfs: Fix corrupted loop in debugfs_remove_recursive stable_kernel_rules: Add pointer to netdev-FAQ for network patches driver core: platform: add device binding path 'driver_override' driver core/platform: remove unused implicit padding in platform_object firmware loader: inform direct failure when udev loader is disabled firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN firmware: read firmware size using i_size_read() firmware loader: allow disabling of udev as firmware loader reservation: add suppport for read-only access using rcu reservation: update api and add some helpers ... Conflicts: drivers/base/platform.c
2014-08-04Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso updates from Ingo Molnar: "Further simplifications and improvements to the VDSO code, by Andy Lutomirski" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64/vsyscall: Fix warn_bad_vsyscall log output x86/vdso: Set VM_MAYREAD for the vvar vma x86, vdso: Get rid of the fake section mechanism x86, vdso: Move the vvar area before the vdso text
2014-08-04Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 UV TLB update from Ingo Molnar: "UV TLB shootdown logic updates for version of the UV architecture" * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/uv: Update the UV3 TLB shootdown logic
2014-08-04Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle are: - RAS tracing/events infrastructure, by Gong Chen. - Various generalizations of the APEI code to make it available to non-x86 architectures, by Tomasz Nowicki" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ras: Fix build warnings in <linux/aer.h> acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context. acpi, apei, ghes: Make NMI error notification to be GHES architecture extension. apei, mce: Factor out APEI architecture specific MCE calls. RAS, extlog: Adjust init flow trace, eMCA: Add a knob to adjust where to save event log trace, RAS: Add eMCA trace event interface RAS, debugfs: Add debugfs interface for RAS subsystem CPER: Adjust code flow of some functions x86, MCE: Robustify mcheck_init_device trace, AER: Move trace into unified interface trace, RAS: Add basic RAS trace event x86, MCE: Kill CPU_POST_DEAD
2014-08-04Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle are: - Intel SOC driver updates, by Aubrey Li. - TS5500 platform updates, by Vivien Didelot" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pmc_atom: Silence shift wrapping warnings in pmc_sleep_tmr_show() x86/pmc_atom: Expose PMC device state and platform sleep state x86/pmc_atom: Eisable a few S0ix wake up events for S0ix residency x86/platform: New Intel Atom SOC power management controller driver x86/platform/ts5500: Add support for TS-5400 boards x86/platform/ts5500: Add a 'name' sysfs attribute x86/platform/ts5500: Use the DEVICE_ATTR_RO() macro
2014-08-04Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Ingo Molnar: "The main change in this cycle is the rework of the TLB range flushing code, to simplify, fix and consolidate the code. By Dave Hansen" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Set TLB flush tunable to sane value (33) x86/mm: New tunable for single vs full TLB flush x86/mm: Add tracepoints for TLB flushes x86/mm: Unify remote INVLPG code x86/mm: Fix missed global TLB flush stat x86/mm: Rip out complicated, out-of-date, buggy TLB flushing x86/mm: Clean up the TLB flushing code x86/smep: Be more informative when signalling an SMEP fault
2014-08-04Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI changes from Ingo Molnar: "Main changes in this cycle are: - arm64 efi stub fixes, preservation of FP/SIMD registers across firmware calls, and conversion of the EFI stub code into a static library - Ard Biesheuvel - Xen EFI support - Daniel Kiper - Support for autoloading the efivars driver - Lee, Chun-Yi - Use the PE/COFF headers in the x86 EFI boot stub to request that the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael Brown - Consolidate all the x86 EFI quirks into one file - Saurabh Tangri - Additional error logging in x86 EFI boot stub - Ulf Winkelvos - Support loading initrd above 4G in EFI boot stub - Yinghai Lu - EFI reboot patches for ACPI hardware reduced platforms" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) efi/arm64: Handle missing virtual mapping for UEFI System Table arch/x86/xen: Silence compiler warnings xen: Silence compiler warnings x86/efi: Request desired alignment via the PE/COFF headers x86/efi: Add better error logging to EFI boot stub efi: Autoload efivars efi: Update stale locking comment for struct efivars arch/x86: Remove efi_set_rtc_mmss() arch/x86: Replace plain strings with constants xen: Put EFI machinery in place xen: Define EFI related stuff arch/x86: Remove redundant set_bit(EFI_MEMMAP) call arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call efi: Introduce EFI_PARAVIRT flag arch/x86: Do not access EFI memory map if it is not available efi: Use early_mem*() instead of early_io*() arch/ia64: Define early_memunmap() x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag efi/reboot: Allow powering off machines using EFI efi/reboot: Add generic wrapper around EfiResetSystem() ...