summaryrefslogtreecommitdiff
path: root/block/blk.h
AgeCommit message (Collapse)Author
2024-09-11block: implement async io_uring discard cmdPavel Begunkov
io_uring allows implementing custom file specific asynchronous operations via the fops->uring_cmd callback, a.k.a. IORING_OP_URING_CMD requests or just io_uring commands. Use it to add support for async discards. Normally, it first tries to queue up bios in a non-blocking context, and if that fails, we'd retry from a blocking context by returning -EAGAIN to the core io_uring. We always get the result from bios asynchronously by setting a custom bi_end_io callback, at which point we drag the request into the task context to either reissue or complete it and post a completion to the user. Unlike ioctl(BLKDISCARD) with stronger guarantees against races, we only do a best effort attempt to invalidate page cache, and it can race with any writes and reads and leave page cache stale. It's the same kind of races we allow to direct writes. Also, apart from cases where discarding is not allowed at all, e.g. discards are not supported or the file/device is read only, the user should assume that the sector range on disk is not valid anymore, even when an error was returned to the user. Suggested-by: Conrad Meyer <conradmeyer@meta.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/2b5210443e4fa0257934f73dfafcc18a77cd0e09.1726072086.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-11block: Added folio-ized version of bio_add_hw_page()Kundan Kumar
Added new bio_add_hw_folio() function as a wrapper around bio_add_hw_page(). This is a prep patch. Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20240911064935.5630-2-kundan.kumar@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-29block: don't use bio_split_rw on misc operationsChristoph Hellwig
bio_split_rw is designed to split read and write bios with a payload. Currently it is called by __bio_split_to_limits for all operations not explicitly list, which works because bio_may_need_split explicitly checks for bi_vcnt == 1 and thus skips the bypass if there is no payload and bio_for_each_bvec loop will never execute it's body if bi_size is 0. But all this is hard to understand, fragile and wasted pointless cycles. Switch __bio_split_to_limits to only call bio_split_rw for READ and WRITE command and don't attempt any kind split for operation that do not require splitting. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Link: https://lore.kernel.org/r/20240826173820.1690925-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-29block: properly handle REQ_OP_ZONE_APPEND in __bio_split_to_limitsChristoph Hellwig
Currently REQ_OP_ZONE_APPEND is handled by the bio_split_rw case in __bio_split_to_limits. This is harmful because REQ_OP_ZONE_APPEND bios do not adhere to the soft max_limits value but instead use their own capped version of max_hw_sectors, leading to incorrect splits that later blow up in bio_split. We still need the bio_split_rw logic to count nr_segs for blk-mq code, so add a new wrapper that passes in the right limit, and turns any bio that would need a split into an error as an additional debugging aid. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Link: https://lore.kernel.org/r/20240826173820.1690925-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-29block: rework bio splittingChristoph Hellwig
The current setup with bio_may_exceed_limit and __bio_split_to_limits is a bit of a mess. Change it so that __bio_split_to_limits does all the work and is just a variant of bio_split_to_limits that returns nr_segs. This is done by inlining it and instead have the various bio_split_* helpers directly submit the potentially split bios. To support btrfs, the rw version has a lower level helper split out that just returns the offset to split. This turns out to nicely clean up the btrfs flow as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Link: https://lore.kernel.org/r/20240826173820.1690925-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-07-22Merge tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linuxLinus Torvalds
Pull block integrity mapping updates from Jens Axboe: "A set of cleanups and fixes for the block integrity support. Sent separately from the main block changes from last week, as they depended on later fixes in the 6.10-rc cycle" * tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linux: block: don't free the integrity payload in bio_integrity_unmap_free_user block: don't free submitter owned integrity payload on I/O completion block: call bio_integrity_unmap_free_user from blk_rq_unmap_user block: don't call bio_uninit from bio_endio block: also return bio_integrity_payload * from stubs block: split integrity support out of bio.h
2024-07-08block: add a bvec_phys helperChristoph Hellwig
Get callers out of poking into bvec internals a bit more. Not a huge win right now, but with the proposed new DMA mapping API we might end up with a lot more of this otherwise. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20240706075228.2350978-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-07-03block: don't free submitter owned integrity payload on I/O completionChristoph Hellwig
Currently __bio_integrity_endio frees the integrity payload unless it is explicitly marked as user-mapped. This means in-kernel callers that allocate their own integrity payload never get to see it on I/O completion. The current two users don't need it as they just pre-mapped PI tuples received over the network, but this limits uses of integrity data lot. Change bio_integrity_endio to call __bio_integrity_endio for block layer generated integrity data only, and leave freeing of submitter allocated integrity data to bio_uninit which also gets called from the final bio_put. This requires that unmapping user mapped or copied integrity data is now always done by the caller, and the special BIP_INTEGRITY_USER flag can go away. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240702151047.1746127-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-07-03block: split integrity support out of bio.hChristoph Hellwig
Split struct bio_integrity_payload and the related prototypes out of bio.h into a separate bio-integrity.h header so that it is only pulled in by the few places that need it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anuj Gupta <anuj20.g@samsung.com> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240702151047.1746127-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-28block: remove bio_integrity_processChristoph Hellwig
Move the bvec interation into the generate/verify helpers to avoid a bit of argument passing churn. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240626045950.189758-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-26block: remove disk_update_readaheadChristoph Hellwig
Mark blk_apply_bdi_limits non-static and open code disk_update_readahead in the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240626142637.300624-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-20block: Add core atomic write supportJohn Garry
Add atomic write support, as follows: - add helper functions to get request_queue atomic write limits - report request_queue atomic write support limits to sysfs and update Doc - support to safely merge atomic writes - deal with splitting atomic writes - misc helper functions - add a per-request atomic write flag New request_queue limits are added, as follows: - atomic_write_hw_max is set by the block driver and is the maximum length of an atomic write which the device may support. It is not necessarily a power-of-2. - atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and max_hw_sectors. It is always a power-of-2. Atomic writes may be merged, and atomic_write_max_sectors would be the limit on a merged atomic write request size. This value is not capped at max_sectors, as the value in max_sectors can be controlled from userspace, and it would only cause trouble if userspace could limit atomic_write_unit_max_bytes and the other atomic write limits. - atomic_write_hw_unit_{min,max} are set by the block driver and are the min/max length of an atomic write unit which the device may support. They both must be a power-of-2. Typically atomic_write_hw_unit_max will hold the same value as atomic_write_hw_max. - atomic_write_unit_{min,max} are derived from atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits. Both min and max values must be a power-of-2. - atomic_write_hw_boundary is set by the block driver. If non-zero, it indicates an LBA space boundary at which an atomic write straddles no longer is atomically executed by the disk. The value must be a power-of-2. Note that it would be acceptable to enforce a rule that atomic_write_hw_boundary_sectors is a multiple of atomic_write_hw_unit_max, but the resultant code would be more complicated. All atomic writes limits are by default set 0 to indicate no atomic write support. Even though it is assumed by Linux that a logical block can always be atomically written, we ignore this as it is not of particular interest. Stacked devices are just not supported either for now. An atomic write must always be submitted to the block driver as part of a single request. As such, only a single BIO must be submitted to the block layer for an atomic write. When a single atomic write BIO is submitted, it cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited by the maximum guaranteed BIO size which will not be required to be split. This max size is calculated by request_queue max segments and the number of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each segment containing PAGE_SIZE of data, apart from the first+last, which each can fit logical block size of data. The first+last will be LBS length/aligned as we rely on direct IO alignment rules also. New sysfs files are added to report the following atomic write limits: - atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in bytes - atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in bytes - atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in bytes - atomic_write_max_bytes - same as atomic_write_max_sectors in bytes Atomic writes may only be merged with other atomic writes and only under the following conditions: - total resultant request length <= atomic_write_max_bytes - the merged write does not straddle a boundary Helper function bdev_can_atomic_write() is added to indicate whether atomic writes may be issued to a bdev. If a bdev is a partition, the partition start must be aligned with both atomic_write_unit_min_sectors and atomic_write_hw_boundary_sectors. FSes will rely on the block layer to validate that an atomic write BIO submitted will be of valid size, so add blk_validate_atomic_write_op_size() for this purpose. Userspace expects an atomic write which is of invalid size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use BLK_STS_INVAL for when a BIO needs to be split, as this should mean an invalid size BIO. Flag REQ_ATOMIC is used for indicating an atomic write. Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-20block: Pass blk_queue_get_max_sectors() a request pointerJohn Garry
Currently blk_queue_get_max_sectors() is passed a enum req_op. In future the value returned from blk_queue_get_max_sectors() may depend on certain request flags, so pass a request pointer. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20240620125359.2684798-2-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-19block: move the bounce flag into the features fieldChristoph Hellwig
Move the bounce flag into the features field to reclaim a little bit of space. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240617060532.127975-27-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-14block: remove the blk_integrity_profile structureChristoph Hellwig
Block layer integrity configuration is a bit complex right now, as it indirects through operation vectors for a simple two-dimensional configuration: a) the checksum type of none, ip checksum, crc, crc64 b) the presence or absence of a reference tag Remove the integrity profile, and instead add a separate csum_type flag which replaces the existing ip-checksum field and a new flag that indicates the presence of the reference tag. This removes up to two layers of indirect calls, remove the need to offload the no-op verification of non-PI metadata to a workqueue and generally simplifies the code. The downside is that block/t10-pi.c now has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY already, though. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-21Merge tag 'pull-bd_inode-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull bdev bd_inode updates from Al Viro: "Replacement of bdev->bd_inode with sane(r) set of primitives by me and Yu Kuai" * tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RIP ->bd_inode dasd_format(): killing the last remaining user of ->bd_inode nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode block/bdev.c: use the knowledge of inode/bdev coallocation gfs2: more obvious initializations of mapping->host fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here... grow_dev_folio(): we only want ->bd_inode->i_mapping there use ->bd_mapping instead of ->bd_inode->i_mapping block_device: add a pointer to struct address_space (page cache of bdev) missing helpers: bdev_unhash(), bdev_drop() block: move two helpers into bdev.c block2mtd: prevent direct access of bd_inode dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode) blkdev_write_iter(): saner way to get inode and bdev bcachefs: remove dead function bdev_sectors() ext4: remove block_device_ejected() erofs_buf: store address_space instead of inode erofs: switch erofs_bread() to passing offset instead of block number
2024-05-09blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOWYu Kuai
One the one hand, it's marked EXPERIMENTAL since 2017, and looks like there are no users since then, and no testers and no developers, it's just not active at all. On the other hand, even if the config is disabled, there are still many fields in throtl_grp and throtl_data and many functions that are only used for throtl low. At last, currently blk-throtl is initialized during disk initialization, and destroyed during disk removal, and it exposes many functions to be called directly from block layer. Remove throtl low to make code much more cleaner and follow up work much easier. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240509121107.3195568-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-09block: support to account io_ticks preciselyYu Kuai
Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. This behaviour is introduced by commit 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting"), however, there was a key point that is missed that this patch also improve performance a lot: Before the commit: part_round_stats: if (part->stamp != now) stats |= 1; part_in_flight() -> there can be lots of task here in 1 jiffies. part_round_stats_single() __part_stat_add() part->stamp = now; After the commit: update_io_ticks: stamp = part->bd_stamp; if (time_after(now, stamp)) if (try_cmpxchg()) __part_stat_add() -> only one task can reach here in 1 jiffies. Hence in order to account io_ticks precisely, we only need to know if there are IO inflight at most once in one jiffies. Noted that for rq-based device, iterating tags should not be used here because 'tags->lock' is grabbed in blk_mq_find_and_get_req(), hence part_stat_lock_inc/dec() and part_in_flight() is used to trace inflight. The additional overhead is quite little: - per cpu add/dec for each IO for rq-based device; - per cpu sum for each jiffies; And it's verified by null-blk that there are no performance degration under heavy IO pressure. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240509123717.3223892-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-07block: add a bio_await_chain helperKeith Busch
Add a helper to wait for an entire chain of bios to complete. [hch: split from a larger patch, moved and changed the name now that it is non-static] Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240506042027.2289826-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03missing helpers: bdev_unhash(), bdev_drop()Al Viro
bdev_unhash(): make block device invisible to lookups by device number bdev_drop(): drop reference to associated inode. Both are internal, for use by genhd and partition-related code - similar to bdev_add(). The logics in there (especially the lifetime-related parts of it) ought to be cleaned up, but that's a separate story; here we just encapsulate getting to associated inode. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-05-01block: Improve zone write request completion handlingDamien Le Moal
blk_zone_complete_request() must be called to handle the completion of a zone write request handled with zone write plugging. This function is called from blk_complete_request(), blk_update_request() and also in blk_mq_submit_bio() error path. Improve this by moving this function call into blk_mq_finish_request() as all requests are processed with this function when they complete as well as when they are freed without being executed. This also improves blk_update_request() used by scsi devices as these may repeatedly call this function to handle partial completions. To be consistent with this change, blk_zone_complete_request() is renamed to blk_zone_finish_request() and blk_zone_write_plug_complete_request() is renamed to blk_zone_write_plug_finish_request(). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240501110907.96950-12-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-01block: Fix handling of non-empty flush write requests to zonesDamien Le Moal
Zone write plugging ignores empty (no data) flush operations but handles flush BIOs that have data to ensure that the flush machinery generated write is processed in order. However, the call to blk_zone_write_plug_attempt_merge() which sets a request RQF_ZONE_WRITE_PLUGGING flag is called after blk_insert_flush(), thus missing indicating that a non empty flush request completion needs handling by zone write plugging. Fix this by moving the call to blk_zone_write_plug_attempt_merge() before blk_insert_flush(). And while at it, rename that function as blk_zone_write_plug_init_request() to be clear that it is not just about merging plugged BIOs in the request. While at it, also add a WARN_ONCE() check that the zone write plug for the request is not NULL. Fixes: dd291d77cc90 ("block: Introduce zone write plugging") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240501110907.96950-10-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-17block: Implement zone append emulationDamien Le Moal
Given that zone write plugging manages all writes to zones of a zoned block device and tracks the write pointer position of all zones that are not full nor empty, emulating zone append operations using regular writes can be implemented generically, without relying on the underlying device driver to implement such emulation. This is needed for devices that do not natively support the zone append command (e.g. SMR hard-disks). A device may request zone append emulation by setting its max_zone_append_sectors queue limit to 0. For such device, the function blk_zone_wplug_prepare_bio() changes zone append BIOs into non-mergeable regular write BIOs. Modified zone append BIOs are flagged with the new BIO flag BIO_EMULATES_ZONE_APPEND. This flag is checked on completion of the BIO in blk_zone_write_plug_bio_endio() to restore the original REQ_OP_ZONE_APPEND operation code of the BIO. The block layer internal inline helper function bio_is_zone_append() is added to test if a BIO is either a native zone append operation (REQ_OP_ZONE_APPEND operation code) or if it is flagged with BIO_EMULATES_ZONE_APPEND. Given that both native and emulated zone append BIO completion handling should be similar, The functions blk_update_request() and blk_zone_complete_request_bio() are modified to use bio_is_zone_append() to execute blk_zone_update_request_bio() for both native and emulated zone append operations. This commit contains contributions from Christoph Hellwig <hch@lst.de>. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-11-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-17block: Introduce zone write pluggingDamien Le Moal
Zone write plugging implements a per-zone "plug" for write operations to control the submission and execution order of write operations to sequential write required zones of a zoned block device. Per-zone plugging guarantees that at any time there is at most only one write request per zone being executed. This mechanism is intended to replace zone write locking which implements a similar per-zone write throttling at the scheduler level, but is implemented only by mq-deadline. Unlike zone write locking which operates on requests, zone write plugging operates on BIOs. A zone write plug is simply a BIO list that is atomically manipulated using a spinlock and a kblockd submission work. A write BIO to a zone is "plugged" to delay its execution if a write BIO for the same zone was already issued, that is, if a write request for the same zone is being executed. The next plugged BIO is unplugged and issued once the write request completes. This mechanism allows to: - Untangle zone write ordering from block IO schedulers. This allows removing the restriction on using mq-deadline for writing to zoned block devices. Any block IO scheduler, including "none" can be used. - Zone write plugging operates on BIOs instead of requests. Plugged BIOs waiting for execution thus do not hold scheduling tags and thus are not preventing other BIOs from executing (reads or writes to other zones). Depending on the workload, this can significantly improve the device use (higher queue depth operation) and performance. - Both blk-mq (request based) zoned devices and BIO-based zoned devices (e.g. device mapper) can use zone write plugging. It is mandatory for the former but optional for the latter. BIO-based drivers can use zone write plugging to implement write ordering guarantees, or the drivers can implement their own if needed. - The code is less invasive in the block layer and is mostly limited to blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and bio.c. Zone write plugging is implemented using struct blk_zone_wplug. This structure includes a spinlock, a BIO list and a work structure to handle the submission of plugged BIOs. Zone write plugs structures are managed using a per-disk hash table. Plugging of zone write BIOs is done using the function blk_zone_write_plug_bio() which returns false if a BIO execution does not need to be delayed and true otherwise. This function is called from blk_mq_submit_bio() after a BIO is split to avoid large BIOs spanning multiple zones which would cause mishandling of zone write plugs. This ichange enables by default zone write plugging for any mq request-based block device. BIO-based device drivers can also use zone write plugging by expliclty calling blk_zone_write_plug_bio() in their ->submit_bio method. For such devices, the driver must ensure that a BIO passed to blk_zone_write_plug_bio() is already split and not straddling zone boundaries. Only write and write zeroes BIOs are plugged. Zone write plugging does not introduce any significant overhead for other operations. A BIO that is being handled through zone write plugging is flagged using the new BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag. The completion of BIOs and requests flagged trigger respectively calls to the functions blk_zone_write_bio_endio() and blk_zone_write_complete_request(). The latter function is used to trigger submission of the next plugged BIO using the zone plug work. blk_zone_write_bio_endio() does the same for BIO-based devices. This ensures that at any time, at most one request (blk-mq devices) or one BIO (BIO-based devices) is being executed for any zone. The handling of zone write plugs using a per-zone plug spinlock maximizes parallelism and device usage by allowing multiple zones to be writen simultaneously without lock contention. Zone write plugging ignores flush BIOs without data. Hovever, any flush BIO that has data is always plugged so that the write part of the flush sequence is serialized with other regular writes. Given that any BIO handled through zone write plugging will be the only BIO in flight for the target zone when it is executed, the unplugging and submission of a BIO will have no chance of successfully merging with plugged requests or requests in the scheduler. To overcome this potential performance degradation, blk_mq_submit_bio() calls the function blk_zone_write_plug_attempt_merge() to try to merge other plugged BIOs with the one just unplugged and submitted. Successful merging is signaled using blk_zone_write_plug_bio_merged(), called from bio_attempt_back_merge(). Furthermore, to avoid recalculating the number of segments of plugged BIOs to attempt merging, the number of segments of a plugged BIO is saved using the new struct bio field __bi_nr_segments. To avoid growing the size of struct bio, this field is added as a union with the bio_cookie field. This is safe to do as polling is always disabled for plugged BIOs. When BIOs are plugged in a zone write plug, the device request queue usage counter is always incremented. This reference is kept and reused for blk-mq devices when the plugged BIO is unplugged and submitted again using submit_bio_noacct_nocheck(). For this case, the unplugged BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and blk_mq_submit_bio() proceeds directly to allocating a new request for the BIO, re-using the usage reference count taken when the BIO was plugged. This extra reference count is dropped in blk_zone_write_plug_attempt_merge() for any plugged BIO that is successfully merged. Given that BIO-based devices will not take this path, the extra reference is dropped after a plugged BIO is unplugged and submitted. Zone write plugs are dynamically allocated and managed using a hash table (an array of struct hlist_head) with RCU protection. A zone write plug is allocated when a write BIO is received for the zone and not freed until the zone is fully written, reset or finished. To detect when a zone write plug can be freed, the write state of each zone is tracked using a write pointer offset which corresponds to the offset of a zone write pointer relative to the zone start. Write operations always increment this write pointer offset. Zone reset operations set it to 0 and zone finish operations set it to the zone size. If a write error happens, the wp_offset value of a zone write plug may become incorrect and out of sync with the device managed write pointer. This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR. The function blk_zone_wplug_handle_error() is called from the new disk zone write plug work when this flag is set. This function executes a report zone to update the zone write pointer offset to the current value as indicated by the device. The disk zone write plug work is scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes with an error or when bio_zone_wplug_prepare_bio() detects an unaligned write. Once scheduled, the disk zone write plugs work keeps running until all zone errors are handled. To match the new data structures used for zoned disks, the function disk_free_zone_bitmaps() is renamed to the more generic disk_free_zone_resources(). The function disk_init_zone_resources() is also introduced to initialize zone write plugs resources when a gendisk is allocated. In order to guarantee that the user can simultaneously write up to a number of zones equal to a device max active zone limit or max open zone limit, zone write plugs are allocated using a mempool sized to the maximum of these 2 device limits. For a device that does not have active and open zone limits, 128 is used as the default mempool size. If a change to the device active and open zone limits is detected, the disk mempool is resized when blk_revalidate_disk_zones() is executed. This commit contains contributions from Christoph Hellwig <hch@lst.de>. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-17block: Allow using bio_attempt_back_merge() internallyDamien Le Moal
Remove "static" from the definition of bio_attempt_back_merge() and declare this function in block/blk.h to allow using it internally from other block layer files. The definition of enum bio_merge_status is also moved to block/blk.h. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240408014128.205141-6-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-17block: Introduce blk_zone_update_request_bio()Damien Le Moal
On completion of a zone append request, the request sector indicates the location of the written data. This value must be returned to the user through the BIO iter sector. This is done in 2 places: in blk_complete_request() and in blk_update_request(). Introduce the inline helper function blk_zone_update_request_bio() to avoid duplicating this BIO update for zone append requests, and to compile out this helper call when CONFIG_BLK_DEV_ZONED is not enabled. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240408014128.205141-4-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-26block: Make blk_rq_set_mixed_merge() staticJohn Garry
Since commit 8e756373d7c8 ("block: Move bio merge related functions into blk-merge.c"), blk_rq_set_mixed_merge() has only been referenced in blk-merge.c, so make it static. Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240325083501.2816408-1-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-13block: limit block time caching to in_task() contextJens Axboe
We should not have any callers of this from non-task context, but Jakub ran [1] into one from blk-iocost. Rather than risk running into others, or future ones, just limit blk_time_get_ns() to when it is called from a task. Any other usage is invalid. [1] https://lore.kernel.org/lkml/CAHk-=wiOaBLqarS2uFhM1YdwOvCX4CZaWkeyNDY1zONpbYw2ig@mail.gmail.com/ Fixes: da4c8c3d0975 ("block: cache current nsec time in struct blk_plug") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-11Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - MD pull requests via Song: - Cleanup redundant checks (Yu Kuai) - Remove deprecated headers (Marc Zyngier, Song Liu) - Concurrency fixes (Li Lingfeng) - Memory leak fix (Li Nan) - Refactor raid1 read_balance (Yu Kuai, Paul Luse) - Clean up and fix for md_ioctl (Li Nan) - Other small fixes (Gui-Dong Han, Heming Zhao) - MD atomic limits (Christoph) - NVMe pull request via Keith: - RDMA target enhancements (Max) - Fabrics fixes (Max, Guixin, Hannes) - Atomic queue_limits usage (Christoph) - Const use for class_register (Ricardo) - Identification error handling fixes (Shin'ichiro, Keith) - Improvement and cleanup for cached request handling (Christoph) - Moving towards atomic queue limits. Core changes and driver bits so far (Christoph) - Fix UAF issues in aoeblk (Chun-Yi) - Zoned fix and cleanups (Damien) - s390 dasd cleanups and fixes (Jan, Miroslav) - Block issue timestamp caching (me) - noio scope guarding for zoned IO (Johannes) - block/nvme PI improvements (Kanchan) - Ability to terminate long running discard loop (Keith) - bdev revalidation fix (Li) - Get rid of old nr_queues hack for kdump kernels (Ming) - Support for async deletion of ublk (Ming) - Improve IRQ bio recycling (Pavel) - Factor in CPU capacity for remote vs local completion (Qais) - Add shared_tags configfs entry for null_blk (Shin'ichiro - Fix for a regression in page refcounts introduced by the folio unification (Tony) - Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid, Ricardo, Roman, Tang, Uwe) * tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits) block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC block/swim: Convert to platform remove callback returning void cdrom: gdrom: Convert to platform remove callback returning void block: remove disk_stack_limits md: remove mddev->queue md: don't initialize queue limits md/raid10: use the atomic queue limit update APIs md/raid5: use the atomic queue limit update APIs md/raid1: use the atomic queue limit update APIs md/raid0: use the atomic queue limit update APIs md: add queue limit helpers md: add a mddev_is_dm helper md: add a mddev_add_trace_msg helper md: add a mddev_trace_remap helper bcache: move calculation of stripe_size and io_opt into bcache_device_init virtio_blk: Do not use disk_set_max_open/active_zones() aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts block: move capacity validation to blkpg_do_ioctl() block: prevent division by zero in blk_rq_stat_sum() drbd: atomically update queue limits in drbd_reconsider_queue_parameters ...
2024-02-25block: remove bdev_handle completelyChristian Brauner
We just need to use the holder to indicate whether a block device open was exclusive or not. We did use to do that before but had to give that up once we switched to struct bdev_handle. Before struct bdev_handle we only stashed stuff in file->private_data if this was an exclusive open but after struct bdev_handle we always set file->private_data to a struct bdev_handle and so we had to use bdev_handle->mode or bdev_handle->holder. Now that we don't use struct bdev_handle anymore we can revert back to the old behavior. Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-32-adbd023e19cc@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-25bdev: remove bdev pointer from struct bdev_handleChristian Brauner
We can always go directly via: * I_BDEV(bdev_file->f_inode) * I_BDEV(bdev_file->f_mapping->host) So keeping struct bdev in struct bdev_handle is redundant. Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-30-adbd023e19cc@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-25bdev: make struct bdev_handle private to the block layerChristian Brauner
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-29-adbd023e19cc@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-25bdev: make bdev_{release, open_by_dev}() private to block layerChristian Brauner
Move both of them to the private block header. There's no caller in the tree anymore that uses them directly. Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-28-adbd023e19cc@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-24block: io wait hang check helperKeith Busch
This is the same in two places, and another will be added soon. Create a helper for it. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20240223155910.3622666-4-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-13block: pass a queue_limits argument to blk_alloc_queueChristoph Hellwig
Pass a queue_limits to blk_alloc_queue and apply it after validating and capping the values using blk_validate_limits. This will allow allocating queues with valid queue limits instead of setting the values one at a time later. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240213073425.1621680-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-13block: add an API to atomically update queue limitsChristoph Hellwig
Add a new queue_limits_{start,commit}_update pair of functions that allows taking an atomic snapshot of queue limits, update it, and commit it if it passes validity checking. Also use the low-level validation helper to implement blk_set_default_limits instead of duplicating the initialization. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240213073425.1621680-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05block: update cached timestamp post schedule/preemptionJens Axboe
Mark the task as having a cached timestamp when set assign it, so we can efficiently check if it needs updating post being scheduled back in. This covers both the actual schedule out case, which would've flushed the plug, and the preemption case which doesn't touch the plugged requests (for many reasons, one of them being then we'd need to have preemption disabled around plug state manipulation). Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05block: cache current nsec time in struct blk_plugJens Axboe
Querying the current time is the most costly thing we do in the block layer per IO, and depending on kernel config settings, we may do it many times per IO. None of the callers actually need nsec granularity. Take advantage of that by caching the current time in the plug, with the assumption here being that any time checking will be temporally close enough that the slight loss of precision doesn't matter. If the block plug gets flushed, eg on preempt or schedule out, then we invalidate the cached clock. On a basic peak IOPS test case with iostats enabled, this changes the performance from: IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31 IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32 IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32 IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32 IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31 IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32 IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31 to IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32 IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31 IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31 IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32 IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31 IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31 IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32 which is more than a 9% improvement in performance. Looking at perf diff, we can see a huge reduction in time overhead: 10.55% -9.88% [kernel.vmlinux] [k] read_tsc 1.31% -1.22% [kernel.vmlinux] [k] ktime_get Note that since this relies on blk_plug for the caching, it's only applicable to the issue side. But this is where most of the time calls happen anyway. On the completion side, cached time stamping is done with struct io_comp patch, as long as the driver supports it. It's also worth noting that the above testing doesn't enable any of the higher cost CPU items on the block layer side, like wbt, cgroups, iocost, etc, which all would add additional time querying and hence overhead. IOW, results would likely look even better in comparison with those enabled, as distros would do. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05block: add blk_time_get_ns() and blk_time_get() helpersJens Axboe
Convert any user of ktime_get_ns() to use blk_time_get_ns(), and ktime_get() to blk_time_get(), so we have a unified API for querying the current time in nanoseconds or as ktime. No functional changes intended, this patch just wraps ktime_get_ns() and ktime_get() with a block helper. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05block: move cgroup time handling code into blk.hJens Axboe
In preparation for moving time keeping into blk.h, move the cgroup related code for timestamps in here too. This will help avoid a circular dependency, and also moves it into a more appropriate header as this one is private to the block layer code. Leave struct bio_issue in blk_types.h as it's a proper time definition. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-19block: simplify disk_set_zonedChristoph Hellwig
Only use disk_set_zoned to actually enable zoned device support. For clearing it, call disk_clear_zoned, which is renamed from disk_clear_zone_settings and now directly clears the zoned flag as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20231217165359.604246-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-14block: Add some exports for bcachefsKent Overstreet
- bio_set_pages_dirty(), bio_check_pages_dirty() - dio path - blk_status_to_str() - error messages - bio_add_folio() - this should definitely be exported for everyone, it's the modern version of bio_add_page() Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Cc: linux-block@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20230813182636.2966159-2-kent.overstreet@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-09block: make bvec_try_merge_hw_page() non-staticJinyoung Choi
This will be used for multi-page configuration for integrity payload. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com> Tested-by: "Martin K. Petersen" <martin.petersen@oracle.com> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230803024827epcms2p838d9e9131492c86a159fff25d195658f@epcms2p8 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-17blk-flush: count inflight flush_data requestsChengming Zhou
The flush state machine use a double list to link all inflight flush_data requests, to avoid issuing separate post-flushes for these flush_data requests which shared PREFLUSH. So we can't reuse rq->queuelist, this is why we need rq->flush.list In preparation of the next patch that reuse rq->queuelist for flush state machine, we change the double linked list to unsigned long counter, which count all inflight flush_data requests. This is ok since we only need to know if there is any inflight flush_data request, so unsigned long counter is good. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230717040058.3993930-4-chengming.zhou@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-16block: remove BIO_PAGE_REFFEDChristoph Hellwig
Now that all block direct I/O helpers use page pinning, this flag is unused. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20230614140341.521331-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: replace fmode_t with a block-specific type for block open flagsChristoph Hellwig
The only overlap between the block open flags mapped into the fmode_t and other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and ->ioctl and stop abusing fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: remove unused fmode_t arguments from ioctl handlersChristoph Hellwig
A few ioctl handlers have fmode_t arguments that are entirely unused, remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20230608110258.189493-27-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: move a few internal definitions out of blkdev.hChristoph Hellwig
All these helpers are only used in core block code, so move them out of the public header. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-26-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: delete partitions later in del_gendiskChristoph Hellwig
Delay dropping the block_devices for partitions in del_gendisk until after the call to blk_mark_disk_dead, so that we can implementat notification of removed devices in blk_mark_disk_dead. This requires splitting a lower-level drop_partition helper out of delete_partition and using that from del_gendisk, while having a common loop for the whole device and partitions that calls remove_inode_hash, fsync_bdev and __invalidate_device before the call to blk_mark_disk_dead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-24block: Add BIO_PAGE_PINNED and associated infrastructureDavid Howells
Add BIO_PAGE_PINNED to indicate that the pages in a bio are pinned (FOLL_PIN) and that the pin will need removing. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> cc: Al Viro <viro@zeniv.linux.org.uk> cc: Jens Axboe <axboe@kernel.dk> cc: Jan Kara <jack@suse.cz> cc: Matthew Wilcox <willy@infradead.org> cc: Logan Gunthorpe <logang@deltatee.com> cc: linux-block@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230522205744.2825689-5-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>