| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce area lock contention for non-primary IO TLB pools (Petr
Tesarik)
- don't store redundant offsets in the dma_ranges stuctures (Robin
Murphy)
- clear dev->dma_mem when freeing per-device pools (Joakim Zhang)
* tag 'dma-mapping-6.8-2024-01-08' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: clear dev->dma_mem to NULL after freeing it
swiotlb: reduce area lock contention for non-primary IO TLB pools
dma-mapping: don't store redundant offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and new
platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
* tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (96 commits)
platform/x86/amd/pmc: Modify SMU message port for latest AMD platform
platform/x86/amd/pmc: Add 1Ah family series to STB support list
platform/x86/amd/pmc: Add idlemask support for 1Ah family
platform/x86/amd/pmc: call amd_pmc_get_ip_info() during driver probe
platform/x86/amd/pmc: Add VPE information for AMDI000A platform
platform/x86/amd/pmc: Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf: Return a status code only as a constant in two functions
platform/x86/amd/pmf: Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
platform/x86: wmi: linux/wmi.h: fix Excess kernel-doc description warning
platform/x86/intel/pmc: Add missing extern
platform/x86/intel/pmc/lnl: Add GBE LTR ignore during suspend
platform/x86/intel/pmc/arl: Add GBE LTR ignore during suspend
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
platform/x86: hp-bioscfg: Removed needless asm-generic
platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver
platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver
platform/x86/intel/pmc: Add ssram_init flag in PMC discovery in Meteor Lake
platform/x86/intel/pmc: Move common code to core.c
platform/x86/intel/pmc: Add PSON residency counter for Alder Lake
...
|
|
Merge ACPI utility functions updates for 6.8-rc1:
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
* acpi-utils:
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer()
efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID
ACPI: LPSS: use acpi_dev_uid_match() for matching _UID
ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types
ACPI: bus: update acpi_dev_uid_match() to support multiple types
|
|
Merge ACPI device enumeration updates and ACPI processor driver updates
for 6.8-rc1:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki).
- Adjust the cpufreq thermal reduction algorithm in the ACPI processor
driver for Tegra241 (Srikar Srimath Tirumala, Arnd Bergmann).
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki).
* acpi-scan:
ACPI: scan: Fix an error message in DisCo for Imaging support
ACPI: property: Replicate DT-aligned u32 properties from DisCo for Imaging
ACPI: property: Dig "rotation" property for devices with CSI2 _CRS
ACPI: scan: Extract MIPI DisCo for Imaging data into swnodes
device property: Add SOFTWARE_NODE() macro for defining software nodes
ACPI: scan: Extract _CRS CSI-2 connection information into swnodes
ACPI: scan: Extract CSI-2 connection graph from _CRS
ACPI: property: Support using strings in reference properties
* acpi-processor:
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241
ACPI: processor: Provide empty stub of acpi_proc_quirk_mwait_check()
|
|
A bus_dma_region necessarily stores both CPU and DMA base addresses for
a range, so there's no need to also store the difference between them.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There are only 4 users of acpi_evaluate_reference() and none of them
actually cares about the reason why it fails. All of them are only
interested in whether or not it is successful, so it can return a bool
value indicating that.
Modify acpi_evaluate_reference() as per the observation above and update
its callers accordingly so as to get rid of useless code and local
variables.
The observable behavior of the kernel is not expected to change after
this modification of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Nothing needs this pointer. Return a normal error code with the usual
IOMMU semantic that ENODEV means 'there is no IOMMU driver'.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This is not being used to pass ops, it is just a way to tell if an
iommu driver was probed. These days this can be detected directly via
device_iommu_mapped(). Call device_iommu_mapped() in the two places that
need to check it and remove the iommu parameter everywhere.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.
Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/
Fixes: 01657bc14a39 ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add information extracted from the MIPI DisCo for Imaging device
properties to software nodes created during the CSI-2 connection graph
discovery.
Link: https://www.mipi.org/specifications/mipi-disco-imaging
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Find ACPI CSI-2 resource descriptors defined since ACPI 6.4 (for
CSI-2 and camera configuration) in _CRS for all device objects in
the given scope of the ACPI namespace that have them, identify the
corresponding "remote endpoint" device objects for them and
allocate memory for software nodes needed to create a DT-like data
structure representing the CSI-2 connection graph for drivers.
The code needed to populate these software nodes will be added by
subsequent change sets.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#camera-serial-interface-csi-2-connection-resource-descriptor
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The I2C-core already has filtering to skip i2c_client instantiation for
LNXVIDEO acpi_device-s with I2cSerialBus resources, since LNXVIDEO devices
are not i2c_client-s and are handled by the acpi_video driver.
This filtering was added to i2c-core-acpi.c in commit 3a4991a9864c ("i2c:
acpi: Do not create i2c-clients for LNXVIDEO ACPI devices").
Now a similar problem has shown up where the SPI-core is instantiating
an unwanted SPI-device for a SpiSerialBus resource under a LNXVIDEO
acpi_device. On a Lenovo Yoga Tab 3 YT3-X90F this unwanted SPI-device
instanstantiation causes the SPI-device instanstantiation for the WM5102
audio codec to fail with:
[ 21.988441] pxa2xx-spi 8086228E:00: chipselect 0 already in use
Instead of duplicating the I2C-core filtering in the SPI-core code, push
the filtering of SerialBus resources under LNXVIDEO acpi_device-s up into
the ACPI-core by adding the LNXVIDEO HID to ignore_serial_bus_ids[].
Note the filtering in the I2C-core i2c_acpi_do_lookup() function is still
necessary because this not only impacts i2c_client instantiation but it
also makes the I2C-core ignore the I2cSerialBus resource when checking what
the maximum speed is the I2C bus supports, which is still necessary.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104205828.63139-1-hdegoede@redhat.com
|
|
Merge ACPI utilities updates, ACPI resource management updates, ACPI
device properties management updates and ACPI LPSS (Intel SoC) driver
update for 6.7-rc1:
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki).
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh).
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede).
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach).
- Allow _DSD buffer data only for byte accessors and document the _DSD
data buffer GUID (Andy Shevchenko).
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav).
* acpi-utils:
ACPI: utils: Remove redundant braces around individual statement
ACPI: utils: Fix up white space in a few places
ACPI: utils: Dynamically determine acpi_handle_list size
ACPI: thermal: Merge trip initialization functions
ACPI: thermal: Collapse trip devices update function wrappers
ACPI: thermal: Collapse trip devices update functions
ACPI: thermal: Add device list to struct acpi_thermal_trip
ACPI: thermal: Fix a small leak in acpi_thermal_add()
ACPI: thermal: Drop valid flag from struct acpi_thermal_trip
ACPI: thermal: Drop redundant trip point flags
ACPI: thermal: Untangle initialization and updates of active trips
ACPI: thermal: Untangle initialization and updates of the passive trip
ACPI: thermal: Simplify critical and hot trips representation
ACPI: thermal: Create and populate trip points table earlier
ACPI: thermal: Determine the number of trip points earlier
ACPI: thermal: Fold acpi_thermal_get_info() into its caller
ACPI: thermal: Simplify initialization of critical and hot trips
* acpi-resource:
ACPI: resource: Do IRQ override on TongFang GMxXGxx
ACPI: resource: Drop .ident values from dmi_system_id tables
ACPI: resource: Consolidate IRQ trigger-type override DMI tables
* acpi-property:
ACPI: property: Document the _DSD data buffer GUID
ACPI: property: Allow _DSD buffer data only for byte accessors
* acpi-soc:
ACPI: LPSS: drop BayTrail and Lynxpoint pinctrl HIDs
|
|
acpi_scan_device_not_present() is called when a device in the
hierarchy is not available for enumeration. Historically enumeration
was only based on whether the device was present.
To add support for only enumerating devices that are both present
and enabled, this helper should be renamed. It was only ever about
enumeration, rename it acpi_scan_device_not_enumerated().
No change in behaviour is intended.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_device_is_present() checks the present or functional bits
from the cached copy of _STA.
A few places open-code this check. Use the helper instead to
improve readability.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Address a long-standing "TBD" comment in the ACPI headers regarding the
number of handles in struct acpi_handle_list.
The number 10, which along with the comment dates back to 2.4.23, seems
like it may have been arbitrarily chosen and isn't sufficient in all
cases [1].
Finally change the code to dynamically determine the size of the handles
table in struct acpi_handle_list and allocate it accordingly.
Update the users of to struct acpi_handle_list to take the additional
dynamic allocation into account.
Link: https://lore.kernel.org/linux-acpi/20230809094451.15473-1-ivan.hu@canonical.com # [1]
Co-developed-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Consolidate probe_device path
- Make the PCI-SAC IOVA allocation trick PCI-only
AMD IOMMU:
- Consolidate PPR log handling
- Interrupt handling improvements
- Refcount fixes for amd_iommu_v2 driver
Intel VT-d driver:
- Enable idxd device DMA with pasid through iommu dma ops
- Lift RESV_DIRECT check from VT-d driver to core
- Miscellaneous cleanups and fixes
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
- Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
- Support for Qualcomm's legacy firmware implementation featured
on at least MSM8956 and MSM8976
- Match compatible strings for Qualcomm SM6350 and SM6375 SoC
variants
- SMMUv3:
- Use 'ida' instead of a bitmap for VMID allocation
- Rockchip IOMMU:
- Lift page-table allocation restrictions on newer hardware
- Mediatek IOMMU:
- Add MT8188 IOMMU Support
- Renesas IOMMU:
- Allow PCIe devices
.. and the usual set of cleanups an smaller fixes"
* tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits)
iommu: Explicitly include correct DT includes
iommu/amd: Remove unused declarations
iommu/arm-smmu-qcom: Add SM6375 SMMUv2
iommu/arm-smmu-qcom: Add SM6350 DPU compatible
iommu/arm-smmu-qcom: Add SM6375 DPU compatible
iommu/arm-smmu-qcom: Sort the compatible list alphabetically
dt-bindings: arm-smmu: Fix MSM8998 clocks description
iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope()
iommu/vt-d: Fix to convert mm pfn to dma pfn
iommu/vt-d: Fix to flush cache of PASID directory table
iommu/vt-d: Remove rmrr check in domain attaching device path
iommu: Prevent RESV_DIRECT devices from blocking domains
dmaengine/idxd: Re-enable kernel workqueue under DMA API
iommu/vt-d: Add set_dev_pasid callback for dma domain
iommu/vt-d: Prepare for set_dev_pasid callback
iommu/vt-d: Make prq draining code generic
iommu/vt-d: Remove pasid_mutex
iommu/vt-d: Add domain_flush_pasid_iotlb()
iommu: Move global PASID allocation from SVA to core
iommu: Generalize PASID 0 for normal DMA w/o PASID
...
|
|
Merge ACPI device enumeration changes, ACPI TAD and extlog drivers
updates, and miscellaneous ACPI-related changes for 6.6-rc1:
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
* acpi-scan:
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
* acpi-tad:
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
* acpi-extlog:
ACPI: extlog: Fix finding the generic error data for v3 structure
* acpi-misc:
ACPI: Remove assorted unused declarations of functions
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: Move AMBA bus scan handling into arm64 specific directory
|
|
'arm/smmu', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Inside IVSC, switching ownership requires an interface with two
different hardware modules, ACE and CSI. The software interface
to these modules is based on Intel MEI framework. Usually mei
client devices are dynamically created, so the info of consumers
depending on mei client devices is not present in the firmware
tables.
This causes problems with the probe ordering with respect to
drivers for consumers of these MEI client devices. But on these
camera sensor devices, the ACPI nodes describing the sensors all
have a _DEP dependency on the matching MEI bus ACPI device, so
adding IVSC MEI bus ACPI device to acpi_honor_dep_ids allows
solving the probe-ordering problem by deferring the enumeration of
ACPI-devices which have a _DEP dependency on an IVSC mei bus ACPI
device.
On TGL platform, the HID of IVSC MEI bus ACPI device is INTC1059,
and on ADL platform, the HID is INTC1095. So add both of them to
acpi_honor_dep_ids.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit fcea0ccf4fd7 ("ACPI: bus: Consolidate all arm specific
initialisation into acpi_arm_init()") moved all of the ARM-specific
initialization into acpi_arm_init(). However, acpi_amba.c being outside
of drivers/acpi/arm64 got ignored and hence acpi_amba_init() was not
moved into acpi_arm_init().
Move the AMBA platform bus support into arm64 specific folder and make
acpi_amba_init() part of acpi_arm_init().
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI device CSC3556 is a Cirrus Logic CS35L56 mono amplifier which
is used in multiples, and can be connected either to I2C or SPI.
There will be multiple instances under the same Device() node. Add it
to ignore_serial_bus_ids and handle it in the serial-multi-instantiate
driver.
There can be a 5th I2cSerialBusV2, but this is an alias address and doesn't
represent a real device. Ignore this by having a dummy 5th entry in the
serial-multi-instantiate instance list with the name of a non-existent
driver, on the same pattern as done for bsg2150.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230728111345.7224-1-rf@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a step toward making __iommu_probe_device() self contained.
It should, under proper locking, check if the device is already associated
with an iommu driver and resolve parallel probes. All but one of the
callers open code this test using two different means, but they all
rely on dev->iommu_group.
Currently the bus_iommu_probe()/probe_iommu_group() and
probe_acpi_namespace_devices() rejects already probed devices with an
unlocked read of dev->iommu_group. The OF and ACPI "replay" functions use
device_iommu_mapped() which is the same read without the pointless
refcount.
Move this test into __iommu_probe_device() and put it under the
iommu_probe_device_lock. The store to dev->iommu_group is in
iommu_group_add_device() which is also called under this lock for iommu
driver devices, making it properly locked.
The only path that didn't have this check is the hotplug path triggered by
BUS_NOTIFY_ADD_DEVICE. The only way to get dev->iommu_group assigned
outside the probe path is via iommu_group_add_device(). Today the only
caller is VFIO no-iommu which never associates with an iommu driver. Thus
adding this additional check is safe.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Instead of doing two pass parsing of the table, replace
acpi_match_device_ids() with acpi_match_acpi_device().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are two pieces of data being exported from drivers/acpi/scan.c
(acpi_device_lock and acpi_wakeup_device_list) that don't have their
definitions declared in anything scan.c is including.
Fix the following sparse warnings by including sleep.h to add the
declarations of acpi_device_lock and acpi_wakeup_device_list to
fix the followng sparse warnings:
drivers/acpi/scan.c:42:1: warning: symbol 'acpi_device_lock' was not declared. Should it be static?
drivers/acpi/scan.c:43:1: warning: symbol 'acpi_wakeup_device_list' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Compiler is not happy about handling of acpi_root variable:
...drivers/acpi/bus.c:37:20: warning: symbol 'acpi_root' was not declared. Should it be static?
Move it's definition to the internal header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that all of the objects for which the acpi_scan_check_dep()
return value is greater than 0 are present in acpi_dep_list as consumers
(there may be multiple entries for one object, but that is not a
problem), so after carrying out the initial ACPI namespace walk in which
devices with dependencies are skipped, acpi_bus_scan() can simply walk
acpi_dep_list and enumerate all of the unique consumer objects from
there and their descendants instead of walking the entire target branch
of the ACPI namespace and looking for device objects that have not been
enumerated yet in it.
Because walking acpi_dep_list is generally less overhead than walking
the entire ACPI namespace, use the observation above to reduce the
system initialization overhead related to ACPI, which is particularly
important on large systems.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Dell Latitude E6430 both with and without the optional NVidia dGPU
has a bug in its ACPI tables which is causing Linux to assign the wrong
ACPI fwnode / companion to the pci_device for the i915 iGPU.
Specifically under the PCI root bridge there are these 2 ACPI Device()s :
Scope (_SB.PCI0)
{
Device (GFX0)
{
Name (_ADR, 0x00020000) // _ADR: Address
}
...
Device (VID)
{
Name (_ADR, 0x00020000) // _ADR: Address
...
Method (_DOS, 1, NotSerialized) // _DOS: Disable Output Switching
{
VDP8 = Arg0
VDP1 (One, VDP8)
}
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
{
...
}
...
}
}
The non-functional GFX0 ACPI device is a problem, because this gets
returned as ACPI companion-device by acpi_find_child_device() for the iGPU.
This is a long standing problem and the i915 driver does use the ACPI
companion for some things, but works fine without it.
However since commit 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
acpi_get_pci_dev() relies on the physical-node pointer in the acpi_device
and that is set on the wrong acpi_device because of the wrong
acpi_find_child_device() return. This breaks the ACPI video code,
leading to non working backlight control in some cases.
Add a type.backlight flag, mark ACPI video bus devices with this and make
find_child_checks() return a higher score for children with this flag set,
so that it picks the right companion-device.
Fixes: 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Not all zero page implementations use empty_zero_page global pointer so
let's substitute empty_zero_page occurence with helper ZERO_PAGE(0).
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some x86/ACPI laptops with MIPI cameras have a LATT2021 ACPI device
in the _DEP dependency list of the ACPI devices for the camera-sensors
(which have flags.honor_deps set).
The _DDN for the LATT2021 device is "Lattice FW Update Client Driver",
suggesting that this is used for firmware updates of something. There
is no Linux driver for this and if Linux gets support for updates it
will likely be in userspace through fwupd.
For now add the LATT2021 HID to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Assigning the device's dma_range_map from the iterator variable after
the loop means it always points to the empty terminator at the end of
the map, which is not what we want. Similarly, freeing the iterator on
error when it points to somwhere in the middle of the allocated array
won't work either. Fix this.
Fixes: bf2ee8d0c385 ("ACPI: scan: Support multiple DMA windows with different offsets")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge changes related to ACPI device enumeration and ACPI support for
platform devices for 6.1-rc1:
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
* acpi-scan:
LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA
ACPI: scan: Support multiple DMA windows with different offsets
* acpi-bus:
ACPI: bus: Refactor ACPI matching functions for better readability
ACPI: bus: Drop kernel doc annotation from acpi_bus_notify()
ACPI: bus: Remove the unneeded result variable
* acpi-platform:
ACPI: platform: Use PLATFORM_DEVID_NONE in acpi_create_platform_device()
ACPI: platform: Sort forbidden_id_list[] in ascending order
ACPI: platform: Use sizeof(*pointer) instead of sizeof(type)
ACPI: platform: Remove redundant print on -ENOMEM
ACPI: platform: Get rid of redundant 'else'
|
|
In commit b83e2b306736 ("ACPI: scan: Add function to fetch dependent
of ACPI device") we added a means of fetching the first device to
declare itself dependent on another ACPI device in the _DEP method.
One assumption in that patch was that there would only be a single
consuming device, but this has not held.
Replace that function with a new function that fetches the next consumer
of a supplier device. Where no "previous" consumer is passed in, it
behaves identically to the original function.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In DT systems configurations, of_dma_get_range() returns struct
bus_dma_region DMA regions; they are used to set-up devices
DMA windows with different offset available for translation between DMA
address and CPU address.
In ACPI systems configuration, acpi_dma_get_range() does not return
DMA regions yet and that precludes setting up the dev->dma_range_map
pointer and therefore DMA regions with multiple offsets.
Update acpi_dma_get_range() to return struct bus_dma_region
DMA regions like of_dma_get_range() does.
After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for
ARM64, where the original dma_addr and size are removed as these
arguments are now redundant, and pass 0 and U64_MAX for dma_base
and size of arch_setup_dma_ops; this is a simplification consistent
with what other ACPI architectures also pass to iommu_setup_dma_ops().
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The parent field in struct acpi_device is, in fact, redundant,
because the dev.parent field in it effectively points to the same
object and it is used by the driver core.
Accordingly, the parent field can be dropped from struct acpi_device
and for this purpose define acpi_dev_parent() to retrieve a parent
struct acpi_device pointer from the dev.parent field in struct
acpi_device. Next, update all of the users of the parent field
in struct acpi_device to use acpi_dev_parent() instead of it and
drop it.
While at it, drop the ACPI_IS_ROOT_DEVICE() macro that is only used
in one place in a confusing way.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
Instead of having acpi_device_add() defined as a wrapper around
__acpi_device_add(), export acpi_tie_acpi_dev() so it can be called
directly by acpi_add_power_resource(), fold acpi_device_add() into the
latter and rename __acpi_device_add() to acpi_device_add().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
The initialization of ACPI device objects is split between
acpi_init_device_object() and __acpi_device_add() that initializes
the dev field in struct acpi_device. The "release" function pointer
is passed to __acpi_device_add() for this reason.
However, that split is artificial and all of the initialization can
be carried out by acpi_init_device_object(), so rearrange the code
to that end. In particular, make acpi_init_device_object() take the
"release" pointer as an argument, along with the "type" which is
related to it, instead of __acpi_device_add().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
The acpi_bus_get_parent() name doesn't really reflect the
purpose of the function so change it to a more accurate
acpi_find_parent_acpi_dev().
While at it, rearrange the code inside that function to make it
easier to read.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
Because acpi_bus_get_acpi_device() is completely analogous to
acpi_fetch_acpi_dev(), rename it to acpi_get_acpi_dev() and
add a kerneldoc comment to it.
Accordingly, rename acpi_bus_put_acpi_device() to acpi_put_acpi_dev()
and update all of the users of these two functions.
While at it, move the acpi_fetch_acpi_dev() header next to the
acpi_get_acpi_dev() header in the header file holding them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat shows, we've had lots of developments in a wide range
at this time; the majority of changes are about ASoC, including
subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
new drivers (as usual), while there have been some significant (but
almost invisible) improvements in ALSA core side, too.
Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user won't
notice, but on the devices with tons of control elements, it can be
visibly faster
- Support for input validation for controls; this will harden for
badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential
deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer in
situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some board
integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on
i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel
MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)"
* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
ALSA: line6: Replace sprintf() with sysfs_emit()
ALSA: hda: Replace sprintf() with sysfs_emit()
ALSA: pcm: Replace sprintf() with sysfs_emit()
ALSA: core: Replace scnprintf() with sysfs_emit()
ALSA: control-led: Replace sprintf() with sysfs_emit()
ALSA: aoa: Replace sprintf() with sysfs_emit()
ALSA: ac97: Replace sprintf() with sysfs_emit()
ALSA: hda/realtek: Add quirk for Clevo NV45PZ
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
ALSA: control: Use deferred fasync helper
ALSA: pcm: Use deferred fasync helper
ALSA: timer: Use deferred fasync helper
ALSA: core: Add async signal helpers
ASoC: q6asm: use kcalloc() instead of kzalloc()
ACPI: scan: Add CLSA0101 Laptop Support
ALSA: hda: cs35l41: Support CLSA0101
ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
ASoC: dt-bindings: use spi-peripheral-props.yaml
ASoC: codecs: va-macro: use fsgen as clock
...
|
|
Add CLSA0101 id to the ignore_serial_bus_ids
so serial-multi-instantiate can correctly
instantiate the driver.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220727095924.80884-4-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drop the children and node list heads that have no more users
from struct acpi_device and the code manipulating them from
__acpi_device_add() and acpi_device_del().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of walking the list of children of an ACPI device directly, use
acpi_dev_for_each_child() or acpi_dev_for_each_child_reverse() to carry
out an action for all of the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace the last instance of acpi_bus_get_device(), added recently
by commit 87e59b36e5e2 ("spi: Support selection of the index of the
ACPI Spi Resource before alloc"), with acpi_fetch_acpi_dev() and
finally drop acpi_bus_get_device() that has no more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
|
|
|
|
Revert commit e38f9ff63e6d ("ACPI: scan: Do not add device IDs from _CID
if _HID is not valid"), because it has introduced regressions on
multiple systems, even though it only has effect on clearly invalid
firmware.
Reported-by: Pierre-Louis Bossart <notifications@github.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The drivers/platform/surface/surface3_button.c code is alsmost a 1:1 copy
of the soc_button_array code.
The only big difference is that it binds to an i2c_client rather then to
a platform_device. The cause of this is the ACPI resources for the MSHW0028
device containing a bogus I2cSerialBusV2 resource which causes the kernel
to instantiate an i2c_client for it instead of a platform_device.
Add "MSHW0028" to the ignore_serial_bus_ids[] list in drivers/apci/scan.c,
so that a platform_device will be instantiated and add support for
the MSHW0028 HID to soc_button_array.
This fully replaces surface3_button, which will be removed in a separate
commit (since it binds to the now no longer created i2c_client it no
longer does anyyhing after this commit).
Note the MSHW0028 id is used by Microsoft to describe the tablet buttons on
both the Surface 3 and the Surface 3 Pro and the actual API/implementation
for the Surface 3 Pro is quite different. The changes in this commit should
not impact the separate surfacepro3_button driver:
1. Because of the bogus I2cSerialBusV2 resource problem that driver binds
to the acpi_device itself, so instantiating a platform_device instead of
an i2c_client does not matter.
2. The soc_button_array driver will not bind to the MSHW0028 device on
the Surface 3 Pro, because it has no GPIO resources.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220224110241.9613-2-hdegoede@redhat.com
|
