summaryrefslogtreecommitdiff
path: root/drivers/clk/at91
AgeCommit message (Collapse)Author
2021-03-13clk: at91: Trivial typo fixes in the file sama7g5.cBhaskar Chowdhury
s/critial/critical/ ......two different places s/parrent/parent/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210313053222.14706-1-unixbhaskar@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-09clk: at91: Fix the declaration of the clocksTudor Ambarus
These are all "early clocks" that require initialization just at of_clk_init() time. Use CLK_OF_DECLARE() to declare them. This also fixes a problem that was spotted when fw_devlink was set to 'on' by default: the boards failed to boot. The reason is that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes the consumers of the clock to be postponed by fw_devlink until the second initialization routine of the clock has been completed. One of the consumers of the clock is the timer, which is used as a clocksource, and needs the clock initialized early. Postponing the timers caused the fail at boot. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sam9x60: remove atmel,osc-bypass supportAlexandre Belloni
The sam9x60 doesn't have the MOSCXTBY bit to enable the crystal oscillator bypass. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201202125816.168618-1-alexandre.belloni@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: register cpu clockClaudiu Beznea
Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: re-factor master clockClaudiu Beznea
Re-factor master clock driver by splitting it into 2 clocks: prescaller and divider clocks. Based on registered clock flags the prescaler's rate could be changed at runtime. This is necessary for platforms supporting DVFS (e.g. SAMA7G5) where master clock could be changed at run-time. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHzClaudiu Beznea
Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at 1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: decrease lower limit for MCK0 rateClaudiu Beznea
On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is also changed by DVFS to avoid over/under clocking of MCK0 consumers. The lower limit is changed to be able to set MCK0 accordingly by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: remove mck0 from parent list of other clocksClaudiu Beznea
MCK0 is changed at runtime by DVFS. Due to this, since not all IPs are glitch free aware at MCK0 changes, remove MCK0 from parent list of other clocks (e.g. generic clock, programmable/system clock, MCKX). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-sam9x60-pll: allow runtime changes for pllClaudiu Beznea
Allow runtime frequency changes for PLLs registered with proper flags. This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristicsEugen Hristev
This SoC has the 5th divisor for the mck0 master clock. Adapt the characteristics accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: add 5th divisor for mck masterEugen Hristev
clk-master can have 5 divisors with a field width of 3 bits on some products. Change the mask and number of divisors accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DTEugen Hristev
Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock from phandle in DT. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt commit message, add CPU PLL] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19dt-bindings: clock: at91: add sama7g5 pll definesEugen Hristev
Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: fix compilation errorClaudiu Beznea
pmc_data_allocate() has been changed. pmc_data_free() was removed. Adapt the code taking this into consideration. With this the programmable clocks were also saved in sama7g5_pmc so that they could be later referenced. Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-20Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', ↵Stephen Boyd
'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next - Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk
2020-10-14clk: at91: sam9x60: support only two programmable clocksClaudiu Beznea
According to datasheet (Chapter 29.16.13, PMC Programmable Clock Register) there are only two programmable clocks on SAM9X60. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1602686072-28296-1-git-send-email-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: clk-sam9x60-pll: remove unused variableClaudiu Beznea
Fix variable set but not used compilation warning. Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1598338751-20607-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: clk-main: update key before writing AT91_CKGR_MORClaudiu Beznea
SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator Main Oscillator Register) that writing any value other than 0x37 on KEY field aborts the write operation. Use the key when selecting main clock parent. Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1598338751-20607-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: remove the checking of parent_nameClaudiu Beznea
There is no need to check parent_name variable while assigning it to init.parent_names. parent_name variable is already checked at the beginning of at91_clk_register_peripheral() function. Fixes: 6114067e437eb ("clk: at91: add PMC peripheral clocks") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1598338751-20607-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: at91: drop unused at91sam9g45_pcr_layoutKrzysztof Kozlowski
The at91sam9g45_pcr_layout is not used so drop it to fix build warning: drivers/clk/at91/at91sam9g45.c:49:36: warning: 'at91sam9g45_pcr_layout' defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200916161740.14173-1-krzk@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sama7g5: add clock support for sama7g5Claudiu Beznea
Add clock support for SAMA7G5. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-19-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-utmi: add utmi support for sama7g5Claudiu Beznea
Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via XTALF register. Values written at bits 2..0 in this register correspond to the on board crystal oscillator frequency. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-18-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputsClaudiu Beznea
Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-programmable: add mux_table optionClaudiu Beznea
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-15-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-peripheral: add support for changeable parent rateClaudiu Beznea
Some peripheral clocks on SAMA7G5 supports requesting parent to change its rate (image related clocks: csi, csi2dc, isc). Add support so that if registered with this option the clock rate to be requested from parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-master: add master clock support for SAMA7G5Claudiu Beznea
Add master clock support (MCK1..4) for SAMA7G5. SAMA7G5's PMC has multiple master clocks feeding different subsystems. One of them feeds image subsystem and is changeable based on image subsystem needs. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-13-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: add mux_table optionClaudiu Beznea
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: pass the id of changeable parent at registrationClaudiu Beznea
Pass the ID of changeable parent at registration. This will allow the scalability of this clock driver with regards to the changeable parent ID for versions of this IP where changeable parent is not the last one in the parents list (e.g. SAMA7G5). With this the clock flags are set to zero in case we have no changeable parent. Also in clk_generated_best_diff() the *best_diff variable is check against tmp_diff variable using ">=" operator instead of ">" so that in case the requested frequency could be obtained using fix parents + gck dividers but the clock also supports changeable parent to be able to force the usage of the changeable parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: replace conditional operator with double logical notClaudiu Beznea
Replace conditional operator with double logical not as code may be simpler to read. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-10-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sckc: register slow_rc with accuracy optionClaudiu Beznea
Chapter 57.7.5 of SAM9X60 datasheet specifies that the maximum drift of this oscillator is +- 3KHz. Use that value and the formula at [1] or the calculator at [2] to compute the PPB value. [1] https://www.everythingrf.com/rf-calculators/ppm-to-hz-calculator [2] https://www.changpuak.ch/electronics/ppm_to_Hz_converter.php Fixes: 04bcc4275e601 ("clk: at91: sckc: add support for SAM9X60") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60: fix main rc oscillator frequencyClaudiu Beznea
Main RC oscillator frequency is 12MHz according to datasheet (chapter 27.2). Fixes: 01e2113de9a52 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: use frac when setting frequencyClaudiu Beznea
In commit a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") the fractional part of PLL wasn't set on registers but it was calculated and taken into account for determining div and mul (see sam9x60_pll_get_best_div_mul()). Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: check fcore against rangesClaudiu Beznea
According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: use logical or for range checkClaudiu Beznea
Use logical or for range check. In case bestrate is not in characteristics->output[0].min..characteristics->output[0].max range we should return -ERANGE. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-sam9x60-pll: fix mul maskClaudiu Beznea
According to datasheet mul mask is on bits 31..24. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: check best_rate against rangesClaudiu Beznea
Check best_rate against available clock ranges. Fixes: df70aeef6083 ("clk: at91: add generated clock driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: continue if __clk_determine_rate() returns errorClaudiu Beznea
__clk_determine_rate() may return error. Skip the current step in case of error. Fixes: 1a1a36d72e3d3 ("clk: at91: clk-generated: make gclk determine audio_pll rate") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: fix possible dead lock in new driversAhmad Fatoum
syscon_node_to_regmap() will make the created regmap get and enable the first clock it can parse from the device tree. This clock is not needed to access the registers and should not be enabled at that time. Use device_node_to_regmap to resolve this as it looks up the regmap in the same list but doesn't care about the clocks. This issue is detected by lockdep when booting the sama5d3 with a device tree containing the new clk bindings. This fix already happened in 6956eb33abb5 ("clk: at91: fix possible deadlock") for the drivers that had been migrated to the new clk binding back then. This does the same for the new drivers as well. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20200703073236.23923-1-a.fatoum@pengutronix.de Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: allow setting all PMC clock parents via DTMichał Mirosław
We need to have clocks accessible via phandle to select them as peripheral clock parent using assigned-clock-parents in DT. Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: allow setting PCKx parent via DTMichał Mirosław
This exposes PROGx clocks for use in assigned-clocks DeviceTree property for selecting PCKx parent clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: optimize pmc data allocationMichał Mirosław
Alloc whole data structure in one block. This makes the code shorter, more efficient and easier to extend in following patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: pmc: decrement node's refcountClaudiu Beznea
of_find_matching_node() increment node's refcount. Call of_node_put() to decrement it after it was used. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1588508289-10140-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: pmc: do not continue if compatible not locatedClaudiu Beznea
pmc_register_ops() is called for all AT91 devices. Return -ENODEV in case of_find_matching_node() returns NULL. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1588508289-10140-1-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: Add peripheral clock for PTCCodrin Ciubotariu
PMC generates the peripheral clock for the PTC. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lkml.kernel.org/r/20200515142720.290206-1-codrin.ciubotariu@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-04-05Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's not much to see in the core framework this time around. Instead the majority of the diff is the normal collection of driver additions for new SoCs and non-critical clk data fixes and updates. The framework must be middle aged. The two biggest directories in the diffstat show that the Qualcomm and Unisoc support added a handful of big drivers for new SoCs but that's not really the whole story because those new drivers tend to add large numbers of lines of clk data. There's a handful of AT91 clk drivers added this time around too and a bunch of improvements to drivers like the i.MX driver. All around lots of updates and fixes in various clk drivers which is good to see. The core framework has only one real major change which has been baking in next for the past couple months. It fixes the framework so that it stops caching a clk's phase when the phase clk_op returns an error. Before this change we would consider some negative errno as a phase and that just doesn't make sense. Core: - Don't show clk phase when it is invalid New Drivers: - Add support for Unisoc SC9863A clks - Qualcomm SM8250 RPMh and MSM8976 RPM clks - Qualcomm SM8250 Global Clock Controller (GCC) support - Qualcomm SC7180 Modem Clock Controller (MSS CC) support - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs Updates: - GPU GX GDSC support on Qualcomm sc7180 - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers - A series from Anson to convert i.MX8 clock bindings to json-schema - Update i.MX pll14xx driver to include new frequency entries for pll1443x table, and return error for invalid PLL type - Add missing of_node_put() call for a number of i.MX clock drivers - Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already have the flag on its child cpu clock - Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL via CORE_SEL slice, and source from A53 CCM clk root when we need to change ARM PLL frequency. Thus, we can support core running above 1GHz safely - Update i.MX pfdv2 driver to check zero rate and use determine_rate for getting the best rate - Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for imx7d - Remove PMC clks from Tegra clk driver - Improved clock/reset handling for the Renesas R-Car USB2 Clock Selector - Conversion to json-schema of the Renesas CPG/MSSR DT bindings - Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3 - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and M3-N - Update Amlogic audio clock gate hierarchy for meson8 and gxbb - Update Amlogic g12a spicc clock sources - Support for Ingenic X1000 TCU clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits) clk: sprd: fix to get a correct ibias of pll dt-bindings: imx8mm-clock: Fix the file path dt-bindings: imx8mq-clock: Fix the file path clk: qcom: rpmh: Drop unnecessary semicolons clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() clk: tegra: Use NULL for pointer initialization clk: sprd: add clocks support for SC9863A clk: sprd: support to get regmap from parent node clk: sprd: Add macros for referencing parents without strings clk: sprd: Add dt-bindings include file for SC9863A dt-bindings: clk: sprd: add bindings for sc9863a clock controller dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific clk: sprd: add gate for pll clocks MAINTAINERS: dt: update reference for arm-integrator.txt clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks clk: mmp2: Add clock for fifth SD HCI on MMP3 dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3 clk: mmp2: Add clocks for the thermal sensors dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors clk: mmp2: add the GPU clocks ...
2020-03-20clk: at91: add at91rm9200 pmc driverAlexandre Belloni
Add a driver for the PMC clocks of the at91rm9200. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20200214145934.53648-1-alexandre.belloni@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-18clk: at91: move sam9x60's PLL register offsets to PMC headerClaudiu Beznea
Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-02-12clk: at91: add at91sam9n12 pmc driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9n12 family. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20200116172316.426703-1-alexandre.belloni@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-12clk: at91: add sama5d3 pmc driverAlexandre Belloni
Add a driver for the PMC clocks of the sama5d3. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20200110223033.1261791-1-alexandre.belloni@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-12clk: at91: add at91sam9g45 pmc driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9g45 family. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20200117210529.17490-1-alexandre.belloni@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 16:38:31 +0000