summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2020-07-24clk: at91: clk-peripheral: add support for changeable parent rateClaudiu Beznea
Some peripheral clocks on SAMA7G5 supports requesting parent to change its rate (image related clocks: csi, csi2dc, isc). Add support so that if registered with this option the clock rate to be requested from parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-master: add master clock support for SAMA7G5Claudiu Beznea
Add master clock support (MCK1..4) for SAMA7G5. SAMA7G5's PMC has multiple master clocks feeding different subsystems. One of them feeds image subsystem and is changeable based on image subsystem needs. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-13-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: add mux_table optionClaudiu Beznea
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: pass the id of changeable parent at registrationClaudiu Beznea
Pass the ID of changeable parent at registration. This will allow the scalability of this clock driver with regards to the changeable parent ID for versions of this IP where changeable parent is not the last one in the parents list (e.g. SAMA7G5). With this the clock flags are set to zero in case we have no changeable parent. Also in clk_generated_best_diff() the *best_diff variable is check against tmp_diff variable using ">=" operator instead of ">" so that in case the requested frequency could be obtained using fix parents + gck dividers but the clock also supports changeable parent to be able to force the usage of the changeable parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: replace conditional operator with double logical notClaudiu Beznea
Replace conditional operator with double logical not as code may be simpler to read. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-10-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sckc: register slow_rc with accuracy optionClaudiu Beznea
Chapter 57.7.5 of SAM9X60 datasheet specifies that the maximum drift of this oscillator is +- 3KHz. Use that value and the formula at [1] or the calculator at [2] to compute the PPB value. [1] https://www.everythingrf.com/rf-calculators/ppm-to-hz-calculator [2] https://www.changpuak.ch/electronics/ppm_to_Hz_converter.php Fixes: 04bcc4275e601 ("clk: at91: sckc: add support for SAM9X60") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60: fix main rc oscillator frequencyClaudiu Beznea
Main RC oscillator frequency is 12MHz according to datasheet (chapter 27.2). Fixes: 01e2113de9a52 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: use frac when setting frequencyClaudiu Beznea
In commit a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") the fractional part of PLL wasn't set on registers but it was calculated and taken into account for determining div and mul (see sam9x60_pll_get_best_div_mul()). Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: check fcore against rangesClaudiu Beznea
According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: use logical or for range checkClaudiu Beznea
Use logical or for range check. In case bestrate is not in characteristics->output[0].min..characteristics->output[0].max range we should return -ERANGE. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-sam9x60-pll: fix mul maskClaudiu Beznea
According to datasheet mul mask is on bits 31..24. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: check best_rate against rangesClaudiu Beznea
Check best_rate against available clock ranges. Fixes: df70aeef6083 ("clk: at91: add generated clock driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: continue if __clk_determine_rate() returns errorClaudiu Beznea
__clk_determine_rate() may return error. Skip the current step in case of error. Fixes: 1a1a36d72e3d3 ("clk: at91: clk-generated: make gclk determine audio_pll rate") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: fix possible dead lock in new driversAhmad Fatoum
syscon_node_to_regmap() will make the created regmap get and enable the first clock it can parse from the device tree. This clock is not needed to access the registers and should not be enabled at that time. Use device_node_to_regmap to resolve this as it looks up the regmap in the same list but doesn't care about the clocks. This issue is detected by lockdep when booting the sama5d3 with a device tree containing the new clk bindings. This fix already happened in 6956eb33abb5 ("clk: at91: fix possible deadlock") for the drivers that had been migrated to the new clk binding back then. This does the same for the new drivers as well. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20200703073236.23923-1-a.fatoum@pengutronix.de Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: Add support for enabling/disabling clocks from debugfsMike Tipton
For test and debug purposes, it's simple enough to enable or disable clocks from shell. Add a new debugfs file 'clk_prepare_enable' that calls clk_prepare_enable() when writing "1" and clk_disable_unprepare() when writing "0". This can have security implications, so only support it when the code has been modified to #define CLOCK_ALLOW_WRITE_DEBUGFS. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200630003024.6282-1-mdtipton@codeaurora.org [sboyd@kernel.org: Reword commit text and remove comment update] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: intel: Avoid unnecessary memset by improving codeRahul Tanwar
memset can be avoided in a loop if the variables used are declared inside the loop. Move such variables declaration inside the loop to avoid memset. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/26624b65d0e6b958c4765a406b9929d1a9ce1c2c.1594880946.git.rahul.tanwar@linux.intel.com [sboyd@kernel.org: Drop NULL assignment that is overwritten] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: intel: Improve locking in the driverRahul Tanwar
Remove/reduce unnecessary spin locking of the code. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/79c0f5f9f5bc512a7e2b5f3c91f6341f28b5854c.1594880946.git.rahul.tanwar@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()Rahul Tanwar
To ensure that clks are unregistered in case of any failure, use devm_clk_hw_register() instead of clk_hw_register(). Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/7ef7009b4e9f986fd6dfbf487c0e85de68a4ba9b.1594880946.git.rahul.tanwar@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: iproc: round clock rate to the closestLori Hikichi
Change from 'DIV_ROUND_UP' to 'DIV_ROUND_CLOSEST' when calculating the clock divisor in the iProc ASIU clock driver to allow to get to the closest clock rate. Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20200612225212.124301-1-ray.jui@broadcom.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: Add graphics clock controller driver for SM8250Jonathan Marek
Add support for the graphics clock controller found on SM8250 based devices. This is initially copied from the downstream kernel, but has been modified to more closely match the upstream sc7180 driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-12-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: Add graphics clock controller driver for SM8150Jonathan Marek
Add support for the graphics clock controller found on SM8150 based devices. This is initially copied from the downstream kernel, but has been modified to more closely match the upstream sc7180 driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-11-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc driversJonathan Marek
All gpucc drivers need this, so move it to common code instead of duplicating it in every gpucc driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-10-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: gcc: remove unnecessary vco_table from SM8150Jonathan Marek
The fixed alpha pll ops only use it for clamping in round_rate, which is unnecessary. This is consistent with SM8250 GCC not using vco_table. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-6-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pllJonathan Marek
Lucid PCAL_DONE is different from trion. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-5-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: same regs and ops for trion and lucidJonathan Marek
Fixed ops were already identical, this adds support for non-fixed ops by sharing between trion and lucid. This also changes the names for trion ops to be consistent with the rest. Note LUCID_PCAL_DONE is renamed to TRION_PCAL_DONE because it is wrong for lucid, LUCID_PCAL_DONE should be BIT(27). Next patch will address this. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-4-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VALJonathan Marek
0x44 isn't a register offset, it is the value that goes into CAL_L_VAL. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: gcc: fix sm8150 GPU and NPU clocksJonathan Marek
Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it should be a 500us delay and not skip, however this matches what was done for other clocks that had 500us delay in downstream. Fixes: f73a4230d5bb ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-2-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-23clk: vc5: use a dedicated struct to describe the output driversLuca Ceresoli
Reusing the generic struct vc5_hw_data for all blocks is handy. However it implies we allocate space the div_int and div_frc fields even for the output drivers where they are unused, and the clk_output_cfg0 and clk_output_cfg0_mask fields for all components even though they are used only for the output drivers. Use a dedicated struct for the output drivers so that each block uses exactly the fields it needs, not more. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200723072603.1795-1-luca@lucaceresoli.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22clk: vc5: Add memory check to prevent oopsAdam Ford
When getting the names of the child nodes, kasprintf is used to allocate memory which is used to create the string for the node name. Unfortunately, there is no memory check to determine if this allocation fails, it may cause an error when trying to get child node name. This patch will check if the memory allocation fails, and returns and -ENOMEM error instead of blindly moving on. Fixes: 260249f929e8 ("clk: vc5: Enable addition output configurations of the Versaclock") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200716122620.4538-1-aford173@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22clk: vc5: fix use of memory after it has been kfree'dColin Ian King
There are a several places where printing an error message of init.name occurs after init.name has been kfree'd. Also the failure message is duplicated each time in the code. Fix this by adding a registration error failure path for these cases, moving the duplicated error messages to one common point and kfree'ing init.name only after it has been used. Changes also shrink the object code size by 171 bytes (x86-64, gcc 9.3): Before: text data bss dec hex filename 21057 3960 64 25081 61f9 drivers/clk/clk-versaclock5.o After: text data bss dec hex filename 20886 3960 64 24910 614e drivers/clk/clk-versaclock5.o Addresses-Coverity: ("Use after free") Fixes: f491276a5168 ("clk: vc5: Allow Versaclock driver to support multiple instances") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200625132736.88832-1-colin.king@canonical.com Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> [sboyd@kernel.org: Drop stray newline] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocksAlex Bee
Since the loopbacktest clock is not exported and is not touched in the driver, it has to be added to rk3188_critical_clocks to be protected from being disabled and in order to get the emac working. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20200722161820.5316-1-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-21clk: actions: Add Actions S500 SoC Reset Management Unit supportCristian Ciocaltea
Add Reset Management Unit (RMU) support for Actions Semi S500 SoC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/3fba2e6f0edfac97cb8c6ce60f95c24852578eac.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoCCristian Ciocaltea
Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/87964ae012e513597b8b4c7be2e7ac332a70087a.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Fix h_clk for Actions S500 SoCCristian Ciocaltea
The h_clk clock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21Merge branch 'clk-imx' into clk-nextStephen Boyd
* clk-imx: clk: imx: vf610: add CAAM clock clk: imx8mp: add mu root clk
2020-07-21Merge branch 'clk-amlogic' into clk-nextStephen Boyd
* clk-amlogic: clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 clk: meson: g12a: Add support for NNA CLK source clocks dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs
2020-07-21Merge branch 'clk-renesas' into clk-nextStephen Boyd
* clk-renesas: clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: renesas: Add r8a774e1 CPG Core Clock Definitions dt-bindings: power: Add r8a774e1 SYSC power domain definitions
2020-07-21Merge branch 'clk-qcom' into clk-nextStephen Boyd
* clk-qcom: clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks
2020-07-21clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845Taniya Das
The display gpll0 branch clock inside GCC needs to always be enabled. Otherwise the AHB clk (disp_cc_mdss_ahb_clk_src) for the display clk controller (dispcc) will stop clocking while sourcing from gpll0 when this branch inside GCC is turned off during unused clk disabling. We can never turn this branch off because the AHB clk for the display subsystem is needed to read/write any registers inside the display subsystem including clk related ones. This makes this branch a really easy way to turn off AHB access to the display subsystem and cause all sorts of mayhem. Let's just make the clk ops keep the clk enabled forever and ignore any attempts to disable this clk so that dispcc accesses keep working. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reported-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/1594796050-14511-1-git-send-email-tdas@codeaurora.org Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") [sboyd@kernel.org: Fill out commit text more] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21ipq806x: gcc: add support for child probeAnsuel Smith
Add support for child probing needed for tsens driver that share the same regs of gcc for this platform. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200716022817.30439-2-ansuelsmth@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-20clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' staticWei Yongjun
The sparse tool complains as follows: drivers/clk/qcom/clk-cpu-8996.c:341:19: warning: symbol 'cpu_msm8996_clks' was not declared. Should it be static? This variable is not used outside of clk-cpu-8996.c, so this commit marks it static. Fixes: 03e342dc45c9 ("clk: qcom: Add CPU clock driver for msm8996") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200714142155.35085-1-weiyongjun1@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16clk: spear: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], initialize "i" to zero. The compiler warning was not a false positive, since clk_pll_set_rate()'s call to clk_pll_round_rate_index() will always fail (since "prate" is NULL), so "i" was never being initialized. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: 7d4998f71b29 ("clk: SPEAr: Vco-pll: Fix compilation warning") Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16clk: st: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just remove this variable since it was actually unused: drivers/clk/st/clkgen-fsyn.c: In function ‘quadfs_set_rate’: drivers/clk/st/clkgen-fsyn.c:793:6: warning: unused variable ‘i’ [-Wunused-variable] 793 | int i; | ^ [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: 5f7aa9071e93 ("clk: st: Support for QUADFS inside ClockGenB/C/D/E/F") Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-15Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into master Pull clk fixes from Stephen Boyd: "A couple build fixes for issues exposed this merge window and a fix for the eMMC clk on AST2600 SoCs that fixes the rate that is calculated by the clk framework" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Specify IOMEM dependency for HSDK pll driver clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
2020-07-13clk: scmi: Fix min and max rate when registering clocks with discrete ratesSudeep Holla
Currently we are not initializing the scmi clock with discrete rates correctly. We fetch the min_rate and max_rate value only for clocks with ranges and ignore the ones with discrete rates. This will lead to wrong initialization of rate range when clock supports discrete rate. Fix this by using the first and the last rate in the sorted list of the discrete clock rates while registering the clock. Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com Fixes: 6d6a1d82eaef7 ("clk: add support for clocks provided by SCMI") Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reported-and-tested-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-07-13clk: renesas: cpg-mssr: Add r8a774e1 supportMarian-Cristian Rotariu
Add support for the RZ/G2H (R8A774E1) SoC to the Renesas Clock Pulse Generator / Module Standby and Software Reset driver. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com [geert: Mark RWDT critical, cfr. commit f23f1101ad0ef1ac ("clk: renesas: rcar-gen3: Mark RWDT clocks as critical")] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-11Merge branch 'clk-fixes' into clk-nextStephen Boyd
* clk-fixes: clk: Specify IOMEM dependency for HSDK pll driver clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
2020-07-11clk: Specify IOMEM dependency for HSDK pll driverDavid Gow
The HSDK pll driver uses the devm_ioremap_resource function, but does not specify a dependency on IOMEM in Kconfig. This causes a build failure on architectures without IOMEM, for example, UML (notably with make allyesconfig). Fix this by making CONFIG_CLK_HSDK depend on CONFIG_IOMEM. Signed-off-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20200630043214.1080961-1-davidgow@google.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-11Merge branch 'clk-kconfig' into clk-nextStephen Boyd
* clk-kconfig: clk: Drop duplicate selection in Kconfig
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-29 18:13:08 +0000